def QuerySend(self, funcPara):
query = Query()
query.CommonHeader = FrameHeader(0x55, funcPara,
staticVar.getid() & 0x00FF,
staticVar.getid() >> 8)
query.CommonTail = self.tail
staticVar.outPoint.write(bytearray(query))
def HistoryDataQuery(self, functionPara):
Obj = ReqData()
startTime = (int(self.StartTimeYear.GetValue()),
int(self.StartTimeMonth.GetValue()),
int(self.StartTimeDay.GetValue()),
int(self.StartTimeHour.GetValue()),
int(self.StartTimeMinute.GetValue()))
endTime = (int(self.EndTimeYear.GetValue()),
int(self.EndTimeMonth.GetValue()),
int(self.EndTimeDay.GetValue()),
int(self.EndTimeHour.GetValue()),
int(self.EndTimeMinute.GetValue()))
apointID = int(self.ApointID.GetValue())
Obj.CommonHeader = FrameHeader(0x55, functionPara,
staticVar.getid() & 0x00FF,
staticVar.getid() >> 8)
Obj.CommonTail = FrameTail(0, 0, 0xAA)
Obj.ApointID_h = apointID >> 8
Obj.ApointID_l = apointID & 0x00FF
Obj.StartTime = self.ByteToTime(startTime)
Obj.EndTime = self.ByteToTime(endTime)
if (staticVar.getSock()):
staticVar.getSock().sendall(bytearray(Obj))
def savePoa(self):
list_for_ab = []
count_ab = 0
for recvPoa in self.contain_poa:
for i in range(recvPoa.AbNum):
list_for_ab.extend(bytearray(recvPoa.AbBlock[i]))
count_ab += recvPoa.AbNum
###组合POA 文件 时间 ####
Time = self.contain_poa[0].Time
CommonHeader = self.contain_poa[0].CommonHeader
ID = (CommonHeader.HighDeviceID << 8) + CommonHeader.LowDeviceID
Year = (Time.HighYear << 4) + Time.LowYear
Month = Time.Month
Day = Time.Day
Hour = (Time.HighHour << 2) + Time.LowHour + 8
Minute = Time.Minute
Second = Time.Second
if (not Year == 2016):
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
ID = staticVar.getid()
count = (self.contain_poa[0].SecondCount[0] << 24) + \
(self.contain_poa[0].SecondCount[1] << 16) + \
(self.contain_poa[0].SecondCount[2] << 8) + \
(self.contain_poa[0].SecondCount[3])
list1 = [str(Month), str(Day), str(Hour), str(Minute), str(Second)]
for i in range(5):
if (len(list1[i]) == 1):
list1[i] = '0' + list1[i]
fileName = str(Year) + "-" + list1[0] + "-" + list1[1] + \
"-" + list1[2] + "-" + list1[3] + \
"-" + list1[4] + '-' + str(count) + '-' + str(ID) + \
'.poa'
##### 经纬度 ############
LonLat = self.contain_poa[0].LonLatAlti
fid = open(".\LocalData\\Poa\\" + fileName, 'wb')
d = dict(LonLat=LonLat, count_ab=count_ab,list_for_ab=list_for_ab)
pickle.dump(d, fid)
fid.close()
def OnbtnOk(self, event):
ID = int(self.StationID.GetValue())
curStationPro = QueryCurStationPro()
curStationPro.CommonHeader = FrameHeader(0x55, 0xA6,
staticVar.getid() & 0x00FF,
staticVar.getid() >> 8)
curStationPro.CommonTail = FrameTail(0, 0, 0xAA)
curStationPro.Identifier_h = ID >> 16
curStationPro.Identifier_m = (ID & 0x00FF00) >> 8
curStationPro.Identifier_l = ID & 0x0000FF
if (self.radioBox.GetSelection()):
curStationPro.LocateWay = 0x0F
centreFreq = float(self.CentreFreq.GetValue())
bandWidth = int(self.BandWidth.GetSelection()) + 1
centreFreq_I = int(centreFreq)
centreFreq_F = int((centreFreq - int(centreFreq)) * 2**10)
curStationPro.Param.HighCentreFreqInteger = centreFreq_I >> 6
curStationPro.Param.LowCentreFreqInteger = centreFreq_I & 0x003F
curStationPro.Param.HighCentreFreqFraction = centreFreq_F >> 8
curStationPro.Param.LowCentreFreqFraction = centreFreq_F & 0x0FF
curStationPro.Param.UploadNum = int(self.UploadNum.GetValue())
curStationPro.Param.DataRate = bandWidth
curStationPro.Param.BandWidth = bandWidth
startTime=(int(self.StartTimeYear.GetValue()),int(self.StartTimeMonth.GetValue()), \
int(self.StartTimeDay.GetValue()),int(self.StartTimeHour.GetValue()), \
int(self.StartTimeMinute.GetValue()),int(self.StartTimeSecond.GetValue()))
curStationPro.Time.HighYear = startTime[0] >> 4
curStationPro.Time.LowYear = startTime[0] & 0x00F
curStationPro.Time.Month = startTime[1]
curStationPro.Time.Day = startTime[2]
curStationPro.Time.HighHour = startTime[3] >> 2
curStationPro.Time.LowHour = startTime[3] & 0x03
curStationPro.Time.Minute = startTime[4]
curStationPro.Time.Second = startTime[5]
#
# if(staticVar.getSock()):
# staticVar.getSock().sendall(bytearray(curStationPro))
self.parent.queueRequest.put(curStationPro)
self.Close()
def SaveIQ(self,recvIQ):
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合tdoa 文件################
count = (recvIQ.SecondCount[0] << 24) + \
(recvIQ.SecondCount[1] << 16) + \
(recvIQ.SecondCount[2] << 8) + \
(recvIQ.SecondCount[3])
Time=recvIQ.Time
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour+8
Minute=Time.Minute
Second=Time.Second
ID = staticVar.getid()
if(not Year==2016):
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
list1=[str(Month),str(Day),str(Hour),str(Minute),str(Second)]
for i in range(5):
if(len(list1[i])==1):
list1[i]='0'+list1[i]
fileName = str(Year) + "-" + list1[0] + "-" + list1[1] + \
"-" + list1[2] + "-" + list1[3] + \
"-" + list1[4] + '-' +str(count)+'-'+ str(ID) + \
'.tdoa'
#print fileName
###########SaveToLocal####################
fid=open(".\LocalData\\Tdoa\\"+ fileName,'wb')
# fid = open(self.dir_iq + fileName, 'wb+')
# fid.write(bytearray(head))
#
# fid.write(bytearray(block))
# fid.write(struct.pack("!B", 0x00))
d=dict(head=head,block=block)
pickle.dump(d, fid)
fid.close()
def upload_iq(self):
self.IQList=[]
recvIQList = self.queueIQUpload.get()
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
Time=recvIQ.Time_
# CommonHeader=recvIQ.CommonHeader
# ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour+8
Minute=Time.Minute
Second=Time.Second
ID = staticVar.getid()
if(not Year==2016):
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + \
"-" + str(Second) + '-' + str(ID) + '-'+\
str(self.mainframe.SpecFrame.iq_sequence)+ '.iq'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + sizeof(block) * len(self.IQList) + 1
print fileName
###########SendToServer###################(H :2字节 Q:8 字节)
sockFile=staticVar.getSockFile()
str1 = struct.pack("!2BHQ", 0x00, 0xFF, fileNameLen, fileContentLen)
sockFile.send(str1 + fileName)
sockFile.send(bytearray(head))
for block in self.IQList:
sockFile.send(bytearray(block))
sockFile.send(struct.pack("!B", 0x00))
del self.IQList
def upload_iq(self):
self.IQList = []
recvIQList = self.queueIQUpload.get()
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
Time = recvIQ.Time_
# CommonHeader=recvIQ.CommonHeader
# ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year = (Time.HighYear << 4) + Time.LowYear
Month = Time.Month
Day = Time.Day
Hour = (Time.HighHour << 2) + Time.LowHour + 8
Minute = Time.Minute
Second = Time.Second
ID = staticVar.getid()
if (not Year == 2016):
curTime = time.strftime('%Y%m%d%H%M%S',
time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + \
"-" + str(Second) + '-' + str(ID) + '-'+\
str(self.mainframe.SpecFrame.iq_sequence)+ '.iq'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + sizeof(block) * len(self.IQList) + 1
print fileName
###########SendToServer###################(H :2字节 Q:8 字节)
sockFile = staticVar.getSockFile()
str1 = struct.pack("!2BHQ", 0x00, 0xFF, fileNameLen, fileContentLen)
sockFile.send(str1 + fileName)
sockFile.send(bytearray(head))
for block in self.IQList:
sockFile.send(bytearray(block))
sockFile.send(struct.pack("!B", 0x00))
del self.IQList
def __init__(self, parent, func):
wx.Dialog.__init__(self, parent, -1, u"台站登记属性查询", size=(300, 200))
self.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
###############################
self.parent = parent
self.tail = FrameTail(0, 0, 0xAA)
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.func = func
###############################################
panel = wx.Panel(self, -1)
sizer = wx.BoxSizer(wx.VERTICAL)
self.FreqStart = wx.TextCtrl(panel, -1, size=(60, 25))
self.FreqEnd = wx.TextCtrl(panel, -1, size=(60, 25))
sizer.Add((20, 15))
sizer.Add(wx.StaticText(panel, -1, u"台站指定频率范围(MHz): ", size=(150, 25)),
0, wx.LEFT, 20)
sizer.Add((20, 10))
hBox3 = wx.BoxSizer(wx.HORIZONTAL)
hBox3.Add(self.FreqStart, 0, wx.LEFT | wx.ALIGN_BOTTOM, 20)
hBox3.Add(wx.StaticText(panel, -1, u"——"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 10)
hBox3.Add(self.FreqEnd, 0, wx.ALIGN_BOTTOM, 20)
sizer.Add(hBox3)
sizer.Add((20, 20))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok = wx.Button(panel, -1, "OK", size=(60, 25))
hBox1.Add(self.btn_ok, 0, wx.LEFT, 20)
hBox1.Add(wx.Button(panel, wx.ID_CANCEL, "CANCEL", size=(60, 25)), 0,
wx.LEFT, 20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre(wx.BOTH)
#Events
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
def OnbtnOK(self,event):
freqStart=int(self.FreqStart.GetValue())
freqEnd=int(self.FreqEnd.GetValue())
highFreqStart=freqStart>>16
midFreqStart=(freqStart&0x00FF00)>>8
lowFreqStart=freqStart&0x0000FF
highFreqEnd=freqEnd>>16
midFreqEnd=(freqEnd&0x00FF00)>>8
lowFreqEnd=freqEnd&0x0000FF
header=FrameHeader(0x55,0xA7,staticVar.getid()&0x00FF,staticVar.getid()>>8)
tail=FrameTail(0,0,0xAA)
structObj=QueryFreqPlan(header,highFreqStart,midFreqStart, \
lowFreqStart,highFreqEnd,midFreqEnd,lowFreqEnd,tail)
if(staticVar.getSock()):
staticVar.getSock().sendall(bytearray(structObj))
self.Destroy()
def SendAndSaveIQ(self):
self.IQList = []
recvIQList = self.SweepRangeIQ
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
ID = staticVar.getid()
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + "-" + str(Second) + '-' + str(ID) + '.iq'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + sizeof(block) * len(self.IQList) + 1
print fileName
print fileNameLen
print fileContentLen
###########SendToServer###################(H :2字节 Q:8 字节)
if (not staticVar.getSockFile() == 0):
if (not self.mainframe.start_local_iq): ##如果没有启动本地定频才是中心站发起的
sockFile = staticVar.getSockFile()
str1 = struct.pack("!2BHQ", 0x00, 0xFF, fileNameLen,
fileContentLen)
sockFile.send(str1 + fileName)
sockFile.send(bytearray(head))
for block in self.IQList:
sockFile.send(bytearray(block))
sockFile.send(struct.pack("!B", 0x00))
else:
self.mainframe.start_local_iq = 0
###########SaveToLocal####################
fid = open(".\LocalData\\IQ\\" + fileName, 'wb+')
# fid = open(self.dir_iq + fileName, 'wb+')
fid.write(bytearray(head))
for block in self.IQList:
fid.write(bytearray(block))
fid.write(struct.pack("!B", 0x00))
fid.close()
#########################################
del self.IQList
def SendAndSaveIQ(self):
self.IQList=[]
recvIQList = self.SweepRangeIQ
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
ID = staticVar.getid()
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + "-" + str(Second) + '-' + str(ID) + '.iq'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + sizeof(block) * len(self.IQList) + 1
print fileName
print fileNameLen
print fileContentLen
###########SendToServer###################(H :2字节 Q:8 字节)
if (not staticVar.getSockFile()==0):
if(not self.mainframe.start_local_iq): ##如果没有启动本地定频才是中心站发起的
sockFile=staticVar.getSockFile()
str1 = struct.pack("!2BHQ", 0x00, 0xFF, fileNameLen, fileContentLen)
sockFile.send(str1 + fileName)
sockFile.send(bytearray(head))
for block in self.IQList:
sockFile.send(bytearray(block))
sockFile.send(struct.pack("!B", 0x00))
else:
self.mainframe.start_local_iq=0
###########SaveToLocal####################
fid=open(".\LocalData\\IQ\\"+ fileName,'wb+')
# fid = open(self.dir_iq + fileName, 'wb+')
fid.write(bytearray(head))
for block in self.IQList:
fid.write(bytearray(block))
fid.write(struct.pack("!B", 0x00))
fid.close()
#########################################
del self.IQList
def query_port(cls,func):
id_for=staticVar.getid()
lowid=id_for&0x00FF
highid=id_for>>8
query=Query()
query.CommonHeader=FrameHeader(0x55,func,lowid,highid)
query.CommonTail=cls.tail
for i in bytearray(query):
print i,
staticVar.getSock().sendall(bytearray(query))
def query_port(cls, func):
id_for = staticVar.getid()
lowid = id_for & 0x00FF
highid = id_for >> 8
query = Query()
query.CommonHeader = FrameHeader(0x55, func, lowid, highid)
query.CommonTail = cls.tail
for i in bytearray(query):
print i,
staticVar.getSock().sendall(bytearray(query))
def HistoryDataQuery(self,functionPara):
Obj=ReqData()
startTime=(int(self.StartTimeYear.GetValue()),int(self.StartTimeMonth.GetValue()), \
int(self.StartTimeDay.GetValue()),int(self.StartTimeHour.GetValue()), \
int(self.StartTimeMinute.GetValue())
)
endTime=(int(self.EndTimeYear.GetValue()),int(self.EndTimeMonth.GetValue()), \
int(self.EndTimeDay.GetValue()),int(self.EndTimeHour.GetValue()), \
int(self.EndTimeMinute.GetValue())
)
apointID=int(self.ApointID.GetValue())
Obj.CommonHeader=FrameHeader(0x55,functionPara,staticVar.getid()&0x00FF,staticVar.getid()>>8)
Obj.CommonTail=FrameTail(0,0,0xAA)
Obj.ApointID_h=apointID>>8
Obj.ApointID_l=apointID&0x00FF
Obj.StartTime=self.ByteToTime(startTime)
Obj.EndTime=self.ByteToTime(endTime)
if(staticVar.getSock()):
staticVar.getSock().sendall(bytearray(Obj))
def SaveIQ(self):
self.IQList=[]
recvIQList = self.SweepRangeIQ
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
Time=recvIQ.Time_
# CommonHeader=recvIQ.CommonHeader
# ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour+8
Minute=Time.Minute
Second=Time.Second
ID = staticVar.getid()
if(not Year==2016):
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + \
"-" + str(Second) + '-' + str(ID) + '-'+\
str(self.mainframe.SpecFrame.iq_sequence)+ '.iq'
print fileName
###########SaveToLocal####################
fid=open(".\LocalData\\IQ\\"+ fileName,'wb+')
# fid = open(self.dir_iq + fileName, 'wb+')
fid.write(bytearray(head))
for block in self.IQList:
fid.write(bytearray(block))
fid.write(struct.pack("!B", 0x00))
fid.close()
#########################################
del self.IQList
def SaveIQ(self):
self.IQList = []
recvIQList = self.SweepRangeIQ
for recvIQ in recvIQList:
block = IQBlock(recvIQ.CurBlockNo, recvIQ.IQDataAmp)
self.IQList.append(block)
head = IQUploadHeader(0x00, recvIQ.LonLatAlti, recvIQ.Param)
#####组合IQ文件################
Time = recvIQ.Time_
# CommonHeader=recvIQ.CommonHeader
# ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year = (Time.HighYear << 4) + Time.LowYear
Month = Time.Month
Day = Time.Day
Hour = (Time.HighHour << 2) + Time.LowHour + 8
Minute = Time.Minute
Second = Time.Second
ID = staticVar.getid()
if (not Year == 2016):
curTime = time.strftime('%Y%m%d%H%M%S',
time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
fileName = str(Year) + "-" + str(Month) + "-" + str(Day) + \
"-" + str(Hour) + "-" + str(Minute) + \
"-" + str(Second) + '-' + str(ID) + '-'+\
str(self.mainframe.SpecFrame.iq_sequence)+ '.iq'
print fileName
###########SaveToLocal####################
fid = open(".\LocalData\\IQ\\" + fileName, 'wb+')
# fid = open(self.dir_iq + fileName, 'wb+')
fid.write(bytearray(head))
for block in self.IQList:
fid.write(bytearray(block))
fid.write(struct.pack("!B", 0x00))
fid.close()
#########################################
del self.IQList
def __init__(self,parent,func):
wx.Dialog.__init__(self,parent,-1,u"台站登记属性查询",size=(300,200))
self.SetFont(wx.Font(10, wx.ROMAN, wx.NORMAL, wx.LIGHT, underline=False, faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
###############################
self.parent=parent
self.tail=FrameTail(0,0,0xAA)
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.func=func
###############################################
panel=wx.Panel(self,-1)
sizer=wx.BoxSizer(wx.VERTICAL)
self.FreqStart=wx.TextCtrl(panel,-1,size=(60,25))
self.FreqEnd=wx.TextCtrl(panel,-1,size=(60,25))
sizer.Add((20,15))
sizer.Add(wx.StaticText(panel,-1,u"台站指定频率范围(MHz): ",size=(150,25)),0,wx.LEFT,20)
sizer.Add((20,10))
hBox3=wx.BoxSizer(wx.HORIZONTAL)
hBox3.Add(self.FreqStart,0,wx.LEFT|wx.ALIGN_BOTTOM,20)
hBox3.Add(wx.StaticText(panel,-1,u"——"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,10)
hBox3.Add(self.FreqEnd,0,wx.ALIGN_BOTTOM,20)
sizer.Add(hBox3)
sizer.Add((20,20))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok=wx.Button(panel,-1,"OK",size=(60,25))
hBox1.Add(self.btn_ok,0,wx.LEFT,20)
hBox1.Add(wx.Button(panel,wx.ID_CANCEL,"CANCEL",size=(60,25)),0,wx.LEFT,20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre( wx.BOTH )
#Events
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
def __init__(self,parent):
wx.Dialog.__init__(self,parent,-1,u"录音回放",wx.DefaultPosition,wx.Size(408,400))
##############硬件通信###############
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.tail = FrameTail(0,0,0xAA)
self.outPoint = staticVar.outPoint
##################################
self.wave2_head_flag = 1
self.count_last = 0
self.time_val_last = 0
self.save_wave2_flg = 1
self.file_path_last = u''
self.choosefilemode = 2
self.iq_file_flg = 1
# self.drawFlag = 1
##################################
self.parent = parent
self.CreatePanel()
self.Layout()
def ConnectCore(self):
flag_sock = 0
flag_sockFile = 0
while (1):
if (staticVar.sock == 0 and flag_sock == 0):
try:
self.serverCom.ConnectToServer(9000)
staticVar.sock = self.serverCom.sock
flag_sock = 1
except Exception:
(ErrorType, ErrorValue, ErrorTB) = sys.exc_info()
wx.MessageBox(
'Connect To Monitor Server Failure!\n' +
str(ErrorValue[0]) + ' ' + str(ErrorValue[1]), 'Alert',
wx.ICON_EXCLAMATION | wx.STAY_ON_TOP)
if (staticVar.sockFile == 0 and flag_sockFile == 0):
try:
self.serverCom.ConnectToServer(9988)
staticVar.sockFile = self.serverCom.sockFile
flag_sockFile = 1
except Exception:
(ErrorType, ErrorValue, ErrorTB) = sys.exc_info()
wx.MessageBox(
'Connect To File Server Failure!\n' +
str(ErrorValue[0]) + ' ' + str(ErrorValue[1]), 'Alert',
wx.ICON_INFORMATION | wx.STAY_ON_TOP)
if (flag_sock and flag_sockFile):
break
time.sleep(5)
connect = ConnectServer()
connect.CommonHeader = FrameHeader(0x55, 0xA1,
staticVar.getid() & 0x00FF,
staticVar.getid() >> 8)
connect.CommonTail = self.tail
if (self.GPS_list == []):
#临时加的测试
self.GPS_list = [0] * 9
#############################
Lon = 114.4202
Lat = 30.5100
Alti = 35
Lon_fen = 0.4202 * 60
Lat_fen = 0.51 * 60
Lon_fen_I = int(Lon_fen)
Lon_fen_f = int((Lon_fen - int(Lon_fen)) * 1000)
Lat_fen_I = int(Lat_fen)
Lat_fen_f = int((Lat_fen - int(Lat_fen)) * 1000)
self.GPS_list[1] = 114
self.GPS_list[2] = (Lon_fen_I << 2) + (Lon_fen_f >> 8)
self.GPS_list[3] = Lon_fen_f & 0x00FF
self.GPS_list[4] = 30
self.GPS_list[5] = (Lat_fen_I << 2) + (Lat_fen_f >> 8)
self.GPS_list[6] = Lat_fen_f & 0x00FF
self.GPS_list[8] = 35
list = self.GPS_list
connect.LonLatAlti = LonLatAltitude(list[0], list[1], list[2], list[3],
list[4] >> 7, list[4] & 0x7F,
list[5], list[6], list[7] >> 7,
list[7] & 0x7F, list[8])
self.serverCom.SendQueryData(connect)
self.thread_station = ReceiveServerData(self)
self.thread_station.setDaemon(True)
self.thread_station.start()
self.thread_upload = SendFileThread(self.SpecFrame,
self.queueFFTUpload,
self.queueAbUpload)
self.thread_upload.setDaemon(True)
self.thread_upload.start()
self.timer = threading.Timer(15, self.hello, [])
self.timer.start()
'''
thread_timer=Timer(self.thread_upload,self.thread_station)
thread_timer.setDaemon(True)
thread_timer.start()
'''
self.m_connect.Enable(False)
def __init__(self, parent):
wx.Dialog.__init__(self, parent, -1, u"登记台站当前属性查询", size=(500, 500))
self.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
#########################################
self.parent = parent
self.tail = FrameTail(0, 0, 0xAA)
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
###############################################
panel = wx.Panel(self, -1)
self.StationID = wx.TextCtrl(panel, -1, size=(80, 25))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add((20, 30))
hBox3 = wx.BoxSizer(wx.HORIZONTAL)
hBox3.Add(wx.StaticText(panel, -1, u"指定台站识别码: ", size=(100, 25)), 0,
wx.LEFT, 20)
hBox3.Add(self.StationID, 0, wx.LEFT | wx.ALIGN_BOTTOM, 20)
sizer.Add(hBox3)
sizer.Add((20, 20))
self.CentreFreq = wx.TextCtrl(panel, -1, size=(80, 25))
self.UploadNum = wx.TextCtrl(panel, -1, "1", size=(80, 25))
self.radioBox = wx.RadioBox(panel, -1, choices=["POA", "POA/TDOA"])
self.radioBox.SetSelection(0)
sampleList = ['5/5', '2.5/2.5', '1/1', '0.5/0/5', '0.1/0/1']
self.BandWidth = wx.ComboBox(panel,
-1,
'5/5',
size=(80, 30),
choices=sampleList)
self.BandWidth.SetSelection(0)
self.StartTimeYear = wx.ComboBox(
panel, -1, "2015", choices=["2015", "2016", "2017", "2018"])
self.StartTimeMonth = wx.ComboBox(panel,
-1,
"12",
choices=[
"1", "2", "3", "4", "5", "6",
"7", "8", "9", "10", "11", "12"
])
self.StartTimeDay = wx.TextCtrl(panel, -1, "1", size=(60, 25))
self.StartTimeHour = wx.TextCtrl(panel, -1, "0", size=(60, 25))
self.StartTimeMinute = wx.TextCtrl(panel, -1, "0", size=(60, 25))
self.StartTimeSecond = wx.TextCtrl(panel, -1, "0", size=(60, 25))
self.StartTimeYear.SetSelection(0)
self.StartTimeMonth.SetSelection(11)
sizer.Add(wx.StaticText(panel, -1, u"几何定位方法", size=(120, 25)), 0,
wx.LEFT, 20)
sizer.Add(self.radioBox, 0, wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"中心频率(MHz)", size=(160, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.CentreFreq, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(
wx.StaticText(panel, -1, u"带宽/数据率 (MHz/Msps):", size=(160, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.BandWidth, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"上传数据块个数(1-256):", size=(160, 25)),
0, wx.LEFT, 20)
hBox1.Add(self.UploadNum, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
sizer.Add(wx.StaticText(panel, -1, u"采集起始时间(年-月-日-时-分-秒)："), 0,
wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear, 0, wx.LEFT, 20)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMonth, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeDay, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeHour, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMinute, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeSecond, 0)
sizer.Add(hBox1)
sizer.Add((20, 20))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok = wx.Button(panel, -1, "OK", size=(60, 25))
hBox1.Add(self.btn_ok, 0, wx.LEFT, 20)
hBox1.Add(wx.Button(panel, wx.ID_CANCEL, "CANCEL", size=(60, 25)), 0,
wx.LEFT, 20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre(wx.BOTH)
#Events
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
def FFTParse(self,ListSpec,ListAb):
for i in range(len(ListSpec)):
recvFFT=ListSpec[i]
recvAbList=ListAb[i]
TotalNum=recvFFT.SweepSectionTotalNum
blockFFT=FFTBlock(recvFFT.CurSectionNo,recvFFT.AllFreq)
blockAb=AbListBlock(recvAbList.CurSectionNo,recvAbList.AbFreqNum,recvAbList.AllAbFreq)
self.SpecList.append(blockFFT)
self.SpecList.append(blockAb)
head=SpecUploadHeader(0x00,recvFFT.LonLatAlti,recvFFT.SweepRecvMode, \
recvFFT.FileUploadMode,staticFileUp.getChangeThres(),staticFileUp.getExtractM(),TotalNum)
###组合功率谱文件####
'''
Time=recvFFT.Time_
CommonHeader=recvFFT.CommonHeader
ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour
Minute=Time.Minute
Second=Time.Second
'''
curTime=time.strftime('%Y%m%d%H%M%S',time.localtime(time.time()))
Year=int(curTime[0:4])
Month=int(curTime[4:6])
Day=int(curTime[6:8])
Hour=int(curTime[8:10])
Minute=int(curTime[10:12])
Second=int(curTime[12:14])
ID=staticVar.getid()
if(self.startTrans==0):
self.Second=Second
self.startTrans=1
if((self.startTrans==1) and (self.Second!=Second)):
self.count=1
self.Second=Second
fileName=str(Year)+"-"+str(Month)+"-"+str(Day)+ \
"-"+str(Hour)+"-"+str(Minute)+"-"+str(Second)+"-"+str(self.count)+'-'+str(ID)
if(recvFFT.CommonHeader.FunctionPara==0x51):
fileName+='-fine.pwr'
else:
fileName+='-coarse.pwr'
fileNameLen=len(fileName)
fileContentLen=sizeof(head)+(sizeof(blockFFT)+sizeof(blockAb))*TotalNum+2
print fileName
print fileNameLen
print fileContentLen
##########SaveToLocal#####################
# fid=open(".\LocalData\\"+ fileName,'wb+')
fid=open(self.dir_spec+fileName,'wb+')
fid.write(bytearray(head))
for i in xrange(len(self.SpecList)/2):
fid.write(bytearray(self.SpecList[2*i]))
fid.write(struct.pack("!B",0xFF))
for i in xrange(len(self.SpecList)/2):
fid.write(bytearray(self.SpecList[2*i+1]))
fid.write(struct.pack("!B",0x00))
fid.close()
#########################################
self.SpecList=[]
self.count+=1
self.countFFT+=1
print 'self.countFFT',self.countFFT
def __init__(self,parent):
wx.Dialog.__init__(self,None,-1,u"电磁路径分布数据请求",size=(400,650))
self.SetFont(wx.Font(10, wx.ROMAN, wx.NORMAL, wx.LIGHT, underline=False, faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
panel=wx.Panel(self,-1)
###############################
self.parent=parent
self.tail=FrameTail(0,0,0xAA)
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.List=staticVar.getCentreFreq()
self.ListFreq=staticVar.getFreq()
###############################################
self.radioBox1=wx.RadioBox(panel,-1,choices=[u"本地获取",u"中心站获取"],style=wx.RA_VERTICAL)
self.radioBox2=wx.RadioBox(panel,-1,choices=[u"显示历史分布",u"显示实时分布"],style=wx.RA_VERTICAL)
self.radioBox3=wx.RadioBox(panel,-1,choices=[u"选择频率",u"手动频率"])
self.radioBox4=wx.RadioBox(panel,-1,choices=[u"YES",u"NO"])
self.radioBox1.SetSelection(1)
self.radioBox2.SetSelection(1)
self.radioBox3.SetSelection(1)
self.radioBox4.SetSelection(1)
self.FreqSection=wx.ComboBox(panel,-1,u"FM调频广播频段",choices=self.List)
self.FreqSection.SetSelection(0)
self.CentreFreq=wx.TextCtrl(panel,-1,size=(80,25))
self.BandWidth=wx.TextCtrl(panel,-1,size=(80,25))
#############################################
curTime=time.strftime('%Y%m%d%H%M%S',time.localtime(time.time()))
Year=int(curTime[0:4])
Month=int(curTime[4:6])
Day=int(curTime[6:8])
Hour=int(curTime[8:10])
Min=int(curTime[10:12])+2
###############################################
self.StartTimeYear=wx.ComboBox(panel,-1,str(Year),choices=["2015","2016","2017","2018"])
self.StartTimeMonth=wx.ComboBox(panel,-1,str(Month),choices=["1","2","3","4","5","6","7","8","9","10","11","12"])
self.StartTimeDay=wx.TextCtrl(panel,-1,str(Day),size=(60,25))
self.StartTimeHour=wx.TextCtrl(panel,-1,str(Hour),size=(60,25))
self.StartTimeMinute=wx.TextCtrl(panel,-1,str(Min),size=(60,25))
self.EndTimeYear=wx.ComboBox(panel,-1,str(Year),choices=["2015","2016","2017","2018"])
self.EndTimeMonth=wx.ComboBox(panel,-1,str(Month),choices=["1","2","3","4","5","6","7","8","9","10","11","12"])
self.EndTimeDay=wx.TextCtrl(panel,-1,str(Day),size=(60,25))
self.EndTimeHour=wx.TextCtrl(panel,-1,str(Hour),size=(60,25))
self.EndTimeMinute=wx.TextCtrl(panel,-1,str(Min),size=(60,25))
sizer=wx.BoxSizer(wx.VERTICAL)
sizer.Add((15,15))
sizer.Add(self.radioBox3,0,wx.LEFT,20)
sizer.Add(self.FreqSection,0,wx.LEFT|wx.TOP,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"中心频率(MHz)",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.CentreFreq,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"带宽(MHz)",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.BandWidth,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"分布数据来源：",size=(100,25)),0,wx.LEFT|wx.ALIGN_TOP,20)
hBox1.Add(self.radioBox1,0,wx.LEFT|wx.ALIGN_TOP,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"T-POA定位：",size=(100,25)),0,wx.LEFT|wx.ALIGN_TOP,20)
hBox1.Add(self.radioBox4,0,wx.LEFT|wx.ALIGN_TOP,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"显示数据来源：",size=(100,25)),0,wx.LEFT|wx.ALIGN_TOP,20)
hBox1.Add(self.radioBox2,0,wx.LEFT|wx.ALIGN_TOP,20)
sizer.Add(hBox1)
sizer.Add((10,10))
sizer.Add(wx.StaticText(panel,-1,u"起始时间(年-月-日-时-分)：",size=(160,25)),0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear,0,wx.LEFT,20)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMonth,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeDay,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeHour,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMinute,0)
sizer.Add(hBox1)
sizer.Add(wx.StaticText(panel,-1,u"终止时间(年-月-日-时-分)：",size=(160,25)),0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.EndTimeYear,0,wx.LEFT,20)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeMonth,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeDay,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeHour,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeMinute,0)
sizer.Add(hBox1)
sizer.Add((30,30))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok=wx.Button(panel,-1,"OK",size=(60,25))
hBox1.Add(self.btn_ok,0,wx.LEFT,20)
hBox1.Add(wx.Button(panel,wx.ID_CANCEL,"CANCEL",size=(60,25)),0,wx.LEFT,20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre( wx.BOTH )
#Events
self.Bind(wx.EVT_RADIOBOX, self.OnRadio,self.radioBox3)
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
self.FreqSection.Enable(False)
self.CentreFreq.Enable(True)
self.BandWidth.Enable(True)
def __init__(self, parent):
wx.Dialog.__init__(self, None, -1, u"电磁路径分布数据请求", size=(400, 650))
self.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
panel = wx.Panel(self, -1)
###############################
self.parent = parent
self.tail = FrameTail(0, 0, 0xAA)
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.List = staticVar.getCentreFreq()
self.ListFreq = staticVar.getFreq()
###############################################
self.radioBox1 = wx.RadioBox(panel,
-1,
choices=[u"本地获取", u"中心站获取"],
style=wx.RA_VERTICAL)
self.radioBox2 = wx.RadioBox(panel,
-1,
choices=[u"显示历史分布", u"显示实时分布"],
style=wx.RA_VERTICAL)
self.radioBox3 = wx.RadioBox(panel, -1, choices=[u"选择频率", u"手动频率"])
self.radioBox4 = wx.RadioBox(panel, -1, choices=[u"YES", u"NO"])
self.radioBox1.SetSelection(1)
self.radioBox2.SetSelection(1)
self.radioBox3.SetSelection(1)
self.radioBox4.SetSelection(1)
self.FreqSection = wx.ComboBox(panel,
-1,
u"FM调频广播频段",
choices=self.List)
self.FreqSection.SetSelection(0)
self.CentreFreq = wx.TextCtrl(panel, -1, size=(80, 25))
self.BandWidth = wx.TextCtrl(panel, -1, size=(80, 25))
#############################################
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Min = int(curTime[10:12]) + 2
###############################################
self.StartTimeYear = wx.ComboBox(
panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.StartTimeMonth = wx.ComboBox(panel,
-1,
str(Month),
choices=[
"1", "2", "3", "4", "5", "6",
"7", "8", "9", "10", "11", "12"
])
self.StartTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.StartTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.StartTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
self.EndTimeYear = wx.ComboBox(
panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.EndTimeMonth = wx.ComboBox(panel,
-1,
str(Month),
choices=[
"1", "2", "3", "4", "5", "6", "7",
"8", "9", "10", "11", "12"
])
self.EndTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.EndTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.EndTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add((15, 15))
sizer.Add(self.radioBox3, 0, wx.LEFT, 20)
sizer.Add(self.FreqSection, 0, wx.LEFT | wx.TOP, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"中心频率(MHz)", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.CentreFreq, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"带宽(MHz)", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.BandWidth, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"分布数据来源：", size=(100, 25)), 0,
wx.LEFT | wx.ALIGN_TOP, 20)
hBox1.Add(self.radioBox1, 0, wx.LEFT | wx.ALIGN_TOP, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"T-POA定位：", size=(100, 25)), 0,
wx.LEFT | wx.ALIGN_TOP, 20)
hBox1.Add(self.radioBox4, 0, wx.LEFT | wx.ALIGN_TOP, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"显示数据来源：", size=(100, 25)), 0,
wx.LEFT | wx.ALIGN_TOP, 20)
hBox1.Add(self.radioBox2, 0, wx.LEFT | wx.ALIGN_TOP, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
sizer.Add(
wx.StaticText(panel, -1, u"起始时间(年-月-日-时-分)：", size=(160, 25)), 0,
wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear, 0, wx.LEFT, 20)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMonth, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeDay, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeHour, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMinute, 0)
sizer.Add(hBox1)
sizer.Add(
wx.StaticText(panel, -1, u"终止时间(年-月-日-时-分)：", size=(160, 25)), 0,
wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.EndTimeYear, 0, wx.LEFT, 20)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeMonth, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeDay, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeHour, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeMinute, 0)
sizer.Add(hBox1)
sizer.Add((30, 30))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok = wx.Button(panel, -1, "OK", size=(60, 25))
hBox1.Add(self.btn_ok, 0, wx.LEFT, 20)
hBox1.Add(wx.Button(panel, wx.ID_CANCEL, "CANCEL", size=(60, 25)), 0,
wx.LEFT, 20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre(wx.BOTH)
#Events
self.Bind(wx.EVT_RADIOBOX, self.OnRadio, self.radioBox3)
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
self.FreqSection.Enable(False)
self.CentreFreq.Enable(True)
self.BandWidth.Enable(True)
def __init__( self,parent):
#### 一些参数值 ######################
self.freq_s=70
self.freq_e=5995
self.upload_mode=0
self.extract_m=1
self.changethres=10
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.tail=FrameTail(0,0,0xAA)
self.outPoint=staticVar.outPoint
self.parent=parent
print self.id
#### show #########
self.show_recv_set=self.parent.show_recv_set
self.byte_to_package=self.parent.byte_to_package
### 编码表 ###
self.dictThres={3:0x00,10:0x01,20:0x02,25:0x03,30:0x04,40:0x05}
##########################################
wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = wx.EmptyString, pos = wx.DefaultPosition, size = wx.Size( 404,365 ), style = wx.DEFAULT_DIALOG_STYLE )
self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
gSizer2 = wx.GridSizer( 1, 1, 0, 0 )
self.m_notebook3 = wx.Notebook( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_notebook3.SetFont(wx.Font(10, wx.ROMAN, wx.NORMAL, wx.LIGHT, underline=False, faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
self.p_sweep_set = wx.Panel( self.m_notebook3, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer3 = wx.GridSizer( 6, 2, 0, 0 )
# gSizer3.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.text= wx.StaticText( self.p_sweep_set, wx.ID_ANY, u"扫频范围：", wx.DefaultPosition, wx.DefaultSize, 0 )
self.text_freq_range= wx.StaticText( self.p_sweep_set, wx.ID_ANY, '70-6G', wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer3.Add( self.text, 0, wx.EXPAND, 5 )
gSizer3.Add(self.text_freq_range, 0, wx.EXPAND, 5)
self.m_staticText6 = wx.StaticText( self.p_sweep_set, wx.ID_ANY, u"扫频接收模式", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText6.Wrap( -1 )
gSizer3.Add( self.m_staticText6, 0, wx.ALL, 5 )
m_sweep_modeChoices = [ u"全频段", u"用户自定义频段",u"标准业务频段" ]
self.m_sweep_mode = wx.ComboBox( self.p_sweep_set, wx.ID_ANY, u"全频段", wx.DefaultPosition, wx.DefaultSize, m_sweep_modeChoices, 0 )
self.m_sweep_mode.SetSelection( 0 )
gSizer3.Add( self.m_sweep_mode, 0, wx.ALL, 5 )
self.m_staticText9 = wx.StaticText( self.p_sweep_set, wx.ID_ANY, u"文件上传模式", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText9.Wrap( -1 )
gSizer3.Add( self.m_staticText9, 0, wx.ALL, 5 )
m_upload_modeChoices = [ u"手动上传", u"不定时自动上传", u"抽取定时自动上传" ]
self.m_upload_mode = wx.ComboBox( self.p_sweep_set, wx.ID_ANY, u"手动上传", wx.DefaultPosition, wx.DefaultSize, m_upload_modeChoices, 0 )
self.m_upload_mode.SetSelection( 0 )
gSizer3.Add( self.m_upload_mode, 0, wx.ALL, 5 )
self.m_staticText11 = wx.StaticText( self.p_sweep_set, wx.ID_ANY, u"文件上传抽取倍率（1-63）", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText11.Wrap( -1 )
gSizer3.Add( self.m_staticText11, 0, wx.ALL, 5 )
self.m_extract_M = wx.TextCtrl( self.p_sweep_set, wx.ID_ANY, u"1", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer3.Add( self.m_extract_M, 0, wx.ALL, 5 )
self.m_staticText10 = wx.StaticText( self.p_sweep_set, wx.ID_ANY, u"数据变化判定门限", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText10.Wrap( -1 )
gSizer3.Add( self.m_staticText10, 0, wx.ALL, 5 )
m_change_thredChoices = [ u"10", u"20" ]
self.m_change_thred = wx.ComboBox( self.p_sweep_set, wx.ID_ANY, u"10", wx.DefaultPosition, wx.DefaultSize, m_change_thredChoices, 0 )
self.m_change_thred.SetSelection( 0 )
gSizer3.Add( self.m_change_thred, 0, wx.ALL, 5 )
self.btn_set = wx.Button( self.p_sweep_set, wx.ID_ANY, u"设置", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer3.Add( self.btn_set, 0, wx.ALL, 5 )
self.btn_cancel = wx.Button( self.p_sweep_set, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer3.Add( self.btn_cancel, 0, wx.ALL, 5 )
self.p_sweep_set.SetSizer( gSizer3 )
self.p_sweep_set.Layout()
gSizer3.Fit( self.p_sweep_set )
self.m_notebook3.AddPage( self.p_sweep_set, u"扫频设置", False )
self.p_sweep_param = wx.Panel( self.m_notebook3, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer4 = wx.GridSizer( 7, 2, 0, 0 )
self.m_check_recvgain = wx.CheckBox( self.p_sweep_param, wx.ID_ANY, u" 接收增益（dB）", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_check_recvgain, 0, wx.ALL, 5 )
self.m_slider_recvgain = wx.Slider( self.p_sweep_param, wx.ID_ANY, 7, -1, 73, wx.DefaultPosition, wx.Size( 150,-1 ), wx.SL_HORIZONTAL|wx.SL_LABELS|wx.SL_SELRANGE )
gSizer4.Add( self.m_slider_recvgain, 0, wx.ALL, 5 )
self.m_check_channelgain = wx.CheckBox(self.p_sweep_param, wx.ID_ANY, u" 通道接收增益表", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_channelgain, 0, wx.ALL, 5)
m_combo_channelgainChoices = ['SRF201', 'SRF301']
self.m_combo_channelgain = wx.ComboBox(self.p_sweep_param, wx.ID_ANY, 'SRF201', wx.DefaultPosition,
wx.DefaultSize, m_combo_channelgainChoices, 0)
gSizer4.Add(self.m_combo_channelgain, 0, wx.ALL, 5)
self.m_check_antgain = wx.CheckBox(self.p_sweep_param, wx.ID_ANY, u"天线接收增益表", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_antgain, 0, wx.ALL, 5)
m_combo_antgainChoices = [u"超短套筒天线", u"超短螺旋天线", u"单鞭螺旋天线", u"平面双锥天线", u"AH-8000", u"AH-7000", \
u"TQJ-1000", u"国人对数", u"汇讯通对数", u"BTA-BicoLog", u"LX-520", u"LX-840", u"LX-1080"]
self.m_combo_antgain = wx.ComboBox(self.p_sweep_param, wx.ID_ANY, u"超短套筒天线", wx.DefaultPosition, wx.DefaultSize,
m_combo_antgainChoices, 0)
gSizer4.Add(self.m_combo_antgain, 0, wx.ALL, 5)
line = wx.StaticLine(self.p_sweep_param, -1, (0, 30), (200, 1), style=wx.LI_HORIZONTAL)
line2 = wx.StaticLine(self.p_sweep_param, -1, (0, 30), (200, 1), style=wx.LI_HORIZONTAL)
gSizer4.Add(line , 0, wx.ALL, 5)
gSizer4.Add(line2 , 0, wx.ALL, 5)
self.m_check_adapt = wx.CheckBox( self.p_sweep_param, wx.ID_ANY, u" 自适应门限（dB）", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_check_adapt, 0, wx.ALL, 5 )
m_combo_adaptChoices = [ u"3 ", u"10", u"20", u"25", u"30", u"40" ]
self.m_combo_adapt = wx.ComboBox( self.p_sweep_param, wx.ID_ANY, u"20", wx.DefaultPosition, wx.Size( 110,-1 ), m_combo_adaptChoices, 0 )
self.m_combo_adapt.SetSelection( 2 )
gSizer4.Add( self.m_combo_adapt, 0, wx.ALL, 5 )
self.m_check_block = wx.CheckBox( self.p_sweep_param, wx.ID_ANY, u" 模板检测", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_check_block, 0, wx.ALL, 5 )
self.m_btn_block = wx.Button(self.p_sweep_param, wx.ID_ANY , u"设置模板检测值" , wx.DefaultPosition , wx.DefaultSize, 0)
gSizer4.Add( self.m_btn_block, 0, wx.ALL, 5 )
# self.m_text_fix = wx.TextCtrl( self.p_sweep_param, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer4.Add( self.m_text_fix, 0, wx.ALL, 5 )
self.m_button_paramSet = wx.Button( self.p_sweep_param, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_button_paramSet, 0, wx.ALL, 5 )
self.m_button_cancel = wx.Button( self.p_sweep_param, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_button_cancel, 0, wx.ALL, 5 )
self.p_sweep_param.SetSizer( gSizer4 )
self.p_sweep_param.Layout()
gSizer4.Fit( self.p_sweep_param )
self.m_notebook3.AddPage( self.p_sweep_param, u"参数设置", True )
self.p_sweep_display = wx.Panel( self.m_notebook3, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer41 = wx.GridSizer(7, 1, 0, 0 )
img_waterfall = wx.Image('.//icons//waterfull.png',wx.BITMAP_TYPE_ANY)
bmp_waterfall = wx.StaticBitmap(self.p_sweep_display,-1,wx.BitmapFromImage(img_waterfall))
img_list = wx.Image('.//icons//list.png',wx.BITMAP_TYPE_ANY)
bmp_list = wx.StaticBitmap(self.p_sweep_display,-1,wx.BitmapFromImage(img_list))
img_stat = wx.Image('.//icons//statistics.png',wx.BITMAP_TYPE_ANY)
bmp_stat = wx.StaticBitmap(self.p_sweep_display,-1,wx.BitmapFromImage(img_stat))
# self.check_spec = wx.CheckBox( self.p_sweep_display, wx.ID_ANY, u" 功率谱图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer41.Add( self.check_spec, 0, wx.ALL, 5 )
self.check_water = wx.CheckBox( self.p_sweep_display, wx.ID_ANY, u" 瀑布图", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer41.Add(bmp_waterfall, 0, wx.LEFT,30)
gSizer41.Add( self.check_water, 0, wx.ALL, 5 )
self.toji = wx.CheckBox(self.p_sweep_display, wx.ID_ANY, u" 统计结果显示", wx.DefaultPosition, wx.DefaultSize,
0)
gSizer41.Add(bmp_stat, 0, wx.LEFT, 30)
gSizer41.Add(self.toji, 0, wx.ALL, 5)
self.list = wx.CheckBox(self.p_sweep_display, wx.ID_ANY, u" 列表显示", wx.DefaultPosition, wx.DefaultSize,
0)
gSizer41.Add(bmp_list, 0, wx.LEFT, 30)
gSizer41.Add(self.list, 0, wx.ALL, 5)
self.btn_display = wx.Button( self.p_sweep_display, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer41.Add( self.btn_display, 0, wx.ALL, 5 )
self.p_sweep_display.SetSizer( gSizer41 )
self.p_sweep_display.Layout()
gSizer41.Fit( self.p_sweep_display )
self.m_notebook3.AddPage( self.p_sweep_display, u"扫频显示", False )
self.p_seep_query = wx.Panel( self.m_notebook3, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
# self.p_seep_query.SetFont( wx.Font( 12, 74, 90, 90, False, "微软雅黑" ) )
bSizer2 = wx.BoxSizer( wx.VERTICAL )
m_radio_queryChoices = [ u"扫频范围", u"接收增益", u"工作状态",u"检测门限",u"接收通道增益修正表", u"天线增益修正表" ]
self.m_radio_query = wx.RadioBox( self.p_seep_query, wx.ID_ANY, u"查询项", wx.DefaultPosition, wx.DefaultSize, m_radio_queryChoices, 1, wx.RA_SPECIFY_COLS )
self.m_radio_query.SetSelection( 0 )
bSizer2.Add( self.m_radio_query, 0, wx.ALL|wx.EXPAND, 5 )
self.btn_query = wx.Button( self.p_seep_query, wx.ID_ANY, u"查询", wx.DefaultPosition, wx.DefaultSize, 0 )
# self.btn_query.SetFont( wx.Font( 9, 74, 90, 90, False, "微软雅黑" ) )
bSizer2.Add( self.btn_query, 0, wx.ALL, 5 )
self.p_seep_query.SetSizer( bSizer2 )
self.p_seep_query.Layout()
bSizer2.Fit( self.p_seep_query )
self.m_notebook3.AddPage( self.p_seep_query, u"查询", False )
gSizer2.Add( self.m_notebook3, 1, wx.EXPAND |wx.ALL, 5 )
self.SetSizer( gSizer2 )
self.Layout()
self.Centre( wx.BOTH )
# Connect Events
self.m_sweep_mode.Bind( wx.EVT_COMBOBOX, self.m_sweep_modeOnCombobox )
self.m_upload_mode.Bind( wx.EVT_COMBOBOX, self.m_upload_modeOnCombobox )
self.btn_set.Bind( wx.EVT_BUTTON, self.btn_setOnButtonClick )
self.btn_cancel.Bind( wx.EVT_BUTTON, self.btn_cancelOnButtonClick )
self.m_btn_block.Bind( wx.EVT_BUTTON, self.btn_setBlockThres)
self.m_button_paramSet.Bind( wx.EVT_BUTTON, self.m_button_paramSetOnButtonClick )
self.m_button_cancel.Bind( wx.EVT_BUTTON, self.m_button_cancelOnButtonClick )
self.btn_display.Bind( wx.EVT_BUTTON, self.btn_displayOnButtonClick )
self.m_radio_query.Bind( wx.EVT_RADIOBOX, self.m_radioBox1OnRadioBox )
self.btn_query.Bind( wx.EVT_BUTTON, self.btn_queryOnButtonClick )
def __init__( self, parent ):
wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = u"压制发射", pos = wx.DefaultPosition, size = wx.Size( 392,382 ), style = wx.DEFAULT_DIALOG_STYLE )
###########################################
self.T1=0
self.T2=0
self.T3=0
self.T4=0
self.press_mode=5
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.tail=FrameTail(0,0,0xAA)
self.outPoint=staticVar.outPoint
#### show ######
self.parent= parent
self.show_recv_set= self.parent.show_recv_set
self.byte_to_package= self.parent.byte_to_package
###########################################
self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
gSizer7 = wx.GridSizer( 1, 1, 0, 0 )
self.m_notebook2 = wx.Notebook( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_notebook2.SetFont(wx.Font( 10,wx.ROMAN,wx.NORMAL,wx.LIGHT,underline=False,faceName=u"微软雅黑",encoding=wx.FONTENCODING_DEFAULT ))
self.m_panel7 = wx.Panel( self.m_notebook2, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer8 = wx.GridSizer( 8, 2, 0, 0 )
gSizer8.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer8.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_staticText3 = wx.StaticText( self.m_panel7, wx.ID_ANY, u"压制设置", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText3.Wrap( -1 )
gSizer8.Add( self.m_staticText3, 0, wx.ALL, 5 )
m_press_setChoices = [ u"结束压制", u"单频点自动", u"单频点手动", u"双频点自动", u"双频点手动" ]
self.m_press_set = wx.Choice( self.m_panel7, wx.ID_ANY, wx.DefaultPosition, wx.Size( 140,-1 ), m_press_setChoices, 0 )
self.m_press_set.SetSelection( 0 )
gSizer8.Add( self.m_press_set, 0, wx.ALL, 5 )
self.m_staticText4 = wx.StaticText( self.m_panel7, wx.ID_ANY, u"压制信号类型", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText4.Wrap( -1 )
gSizer8.Add( self.m_staticText4, 0, wx.ALL, 5 )
m_press_signaltypeChoices = [ u"单频正弦波信号", u"等幅多频信号", u"噪声调频信号", u"数字射频储存DRM信号" ]
self.m_press_signaltype = wx.Choice( self.m_panel7, wx.ID_ANY, wx.DefaultPosition, wx.Size( 140,-1 ), m_press_signaltypeChoices, 0 )
self.m_press_signaltype.SetSelection( 0 )
gSizer8.Add( self.m_press_signaltype, 0, wx.ALL, 5 )
self.m_staticText5 = wx.StaticText( self.m_panel7, wx.ID_ANY, u"压制带宽", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText5.Wrap( -1 )
gSizer8.Add( self.m_staticText5, 0, wx.ALL, 5 )
m_press_bwChoices = [ u"单谱线（正弦波）", u"（等幅多边,噪声调频）", u"直接IQ调制发射（DRM）" ]
self.m_press_bw = wx.Choice( self.m_panel7, wx.ID_ANY, wx.DefaultPosition, wx.Size( 140,-1 ), m_press_bwChoices, 0 )
self.m_press_bw.SetSelection( 0 )
gSizer8.Add( self.m_press_bw, 0, wx.ALL, 5 )
self.m_staticText6 = wx.StaticText( self.m_panel7, wx.ID_ANY, u"压制频率1（Mhz）", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText6.Wrap( -1 )
gSizer8.Add( self.m_staticText6, 0, wx.ALL, 5 )
self.m_freq1 = wx.TextCtrl( self.m_panel7, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer8.Add( self.m_freq1, 0, wx.ALL, 5 )
self.m_staticText7 = wx.StaticText( self.m_panel7, wx.ID_ANY, u"压制频率2（Mhz）", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText7.Wrap( -1 )
gSizer8.Add( self.m_staticText7, 0, wx.ALL, 5 )
self.m_freq2 = wx.TextCtrl( self.m_panel7, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer8.Add( self.m_freq2, 0, wx.ALL, 5 )
self.btn_press_set = wx.Button( self.m_panel7, wx.ID_ANY, u"设置", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer8.Add( self.btn_press_set, 0, wx.ALIGN_RIGHT, 5 )
self.btn_press_cancel = wx.Button( self.m_panel7, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer8.Add( self.btn_press_cancel, 0, wx.ALIGN_CENTER_HORIZONTAL, 5 )
self.m_panel7.SetSizer( gSizer8 )
self.m_panel7.Layout()
gSizer8.Fit( self.m_panel7 )
self.m_notebook2.AddPage( self.m_panel7, u"压制设置", False )
self.m_panel8 = wx.Panel( self.m_notebook2, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer4 = wx.GridSizer( 8, 2, 0, 0 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_staticText71 = wx.StaticText( self.m_panel8, wx.ID_ANY, u"压制发射衰减（dB）", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText71.Wrap( -1 )
gSizer4.Add( self.m_staticText71, 0, wx.ALL, 5 )
self.m_slider_weak = wx.Slider( self.m_panel8, wx.ID_ANY, 0, 0, 89, wx.DefaultPosition, wx.Size( 150,-1 ), wx.SL_HORIZONTAL|wx.SL_LABELS|wx.SL_SELRANGE )
gSizer4.Add( self.m_slider_weak, 0, wx.ALL, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.btn_param_set = wx.Button( self.m_panel8, wx.ID_ANY, u"设置", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.btn_param_set, 0, wx.ALIGN_RIGHT, 5 )
self.m_button7 = wx.Button( self.m_panel8, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.m_button7, 0, wx.ALIGN_CENTER_HORIZONTAL, 5 )
self.m_panel8.SetSizer( gSizer4 )
self.m_panel8.Layout()
gSizer4.Fit( self.m_panel8 )
self.m_notebook2.AddPage( self.m_panel8, u"参数设置", True )
self.m_panel9 = wx.Panel( self.m_notebook2, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer71 = wx.GridSizer( 7, 1, 0, 0 )
gSizer71.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
Choices = [ u"压制发射衰减", u"压制中心频率", u"压制模式查询" ]
self.radio_pressquery= wx.RadioBox( self.m_panel9, wx.ID_ANY, u"查询项", wx.DefaultPosition, wx.Size( 120,140 ),
Choices, 1, wx.RA_SPECIFY_COLS )
self.radio_pressquery.SetSelection( 2 )
gSizer71.Add( self.radio_pressquery, 0, wx.ALL, 5 )
gSizer71.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer71.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer71.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.btn_press_query = wx.Button( self.m_panel9, wx.ID_ANY, u"查询", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer71.Add( self.btn_press_query, 0, wx.ALIGN_BOTTOM|wx.ALIGN_CENTER, 5 )
self.m_panel9.SetSizer( gSizer71 )
self.m_panel9.Layout()
gSizer71.Fit( self.m_panel9 )
self.m_notebook2.AddPage( self.m_panel9, u"查询", False )
gSizer7.Add( self.m_notebook2, 1, wx.EXPAND |wx.ALL, 5 )
self.SetSizer( gSizer7 )
self.Layout()
self.Centre( wx.BOTH )
# Connect Events
self.m_press_set.Bind( wx.EVT_CHOICE, self.m_press_setOnChoice )
self.btn_press_set.Bind( wx.EVT_BUTTON, self.btn_press_setOnChoice)
self.btn_param_set.Bind( wx.EVT_BUTTON, self.btn_param_setOnChoice)
self.btn_press_query.Bind( wx.EVT_BUTTON, self.btn_press_queryOnChoice)
def FFTParse(self, ListSpec, ListAb):
for i in range(len(ListSpec)):
recvFFT = ListSpec[i]
recvAbList = ListAb[i]
TotalNum = recvFFT.SweepSectionTotalNum
blockFFT = FFTBlock(recvFFT.CurSectionNo, recvFFT.AllFreq)
blockAb = AbListBlock(recvAbList.CurSectionNo,
recvAbList.AbFreqNum, recvAbList.AllAbFreq)
self.SpecList.append(blockFFT)
self.SpecList.append(blockAb)
head=SpecUploadHeader(0x00,recvFFT.LonLatAlti,recvFFT.SweepRecvMode, \
recvFFT.FileUploadMode,self.changeThres,self.extractM,TotalNum)
###组合功率谱文件####
Time = recvFFT.Time_
CommonHeader = recvFFT.CommonHeader
ID = (CommonHeader.HighDeviceID << 8) + CommonHeader.LowDeviceID
Year = (Time.HighYear << 4) + Time.LowYear
Month = Time.Month
Day = Time.Day
Hour = (Time.HighHour << 2) + Time.LowHour + 8
Minute = Time.Minute
Second = Time.Second
if (not Year == 2016):
curTime = time.strftime('%Y%m%d%H%M%S',
time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
ID = staticVar.getid()
if (self.startTrans == 0):
self.Second = Second
self.startTrans = 1
if ((self.startTrans == 1) and (self.Second != Second)):
self.count = 1
self.Second = Second
fileName=str(Year)+"-"+str(Month)+"-"+str(Day)+ \
"-"+str(Hour)+"-"+str(Minute)+"-"+str(Second)+"-"+str(self.count)+'-'+str(ID)
if (recvFFT.CommonHeader.FunctionPara == 0x51):
fileName += '-fine.pwr'
else:
fileName += '-coarse.pwr'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + (sizeof(blockFFT) +
sizeof(blockAb)) * TotalNum + 2
# print fileNameLen
# print fileContentLen
############SendToServer###################
if (not staticVar.getSockFile() == 0):
try:
sockFile = staticVar.getSockFile()
str1 = struct.pack("!2BHQ", 0x00, 0xFF, fileNameLen,
fileContentLen)
sockFile.sendall(str1 + fileName)
sockFile.sendall(bytearray(head))
for i in xrange(len(self.SpecList) / 2):
sockFile.sendall(bytearray(self.SpecList[2 * i]))
sockFile.sendall(struct.pack("!B", 0xFF))
for i in xrange(len(self.SpecList) / 2):
sockFile.sendall(bytearray(self.SpecList[2 * i + 1]))
sockFile.sendall(struct.pack("!B", 0x00))
### 发送成功以后打个文件名 ###########
print fileName
self.count += 1
self.countFFT += 1
print 'self.countFFT', self.countFFT
Log.getLogger().debug("send_spec_file_ok--name: %s--num:%s" %
(fileName, self.countFFT))
except socket.error, e:
print 'socket_error_send_spec ', e
Log.getLogger().debug(
" socket_error_found_in_send_spec_file: %s" % e)
Log.getLogger().debug(" Cur socket sockFile=: %s" %
staticVar.sockFile)
staticVar.sockFile = 0
def funcParaDecide(self,dataLen,ListData):
if(ListData[0]==0x77 and ListData[1]==0x88):
print '#### server heart beat #####'
staticVar.count_heart_beat+=1
Log.getLogger().debug("##Receive Server HeartBeat##")
if(abs(self.count_heart_beat-staticVar.count_heart_beat)>2):
print 'heart beat stop'
Log.getLogger().debug("##HeartBeat is not equal ##")
raise socket.error
else:
# ListData[0]=0x55
BUFSIZE=4096
frameFlag=ListData[1]
print 'frameflag',frameFlag
if(frameFlag>0 and frameFlag<=14): ##服务器设置指令下发##
print 'recv set command'
if(frameFlag==11): #中心站发下来的停止功率谱上传的帧(关闭上传)
self.sock.recv(5)
staticFileUp.setUploadMode(0) ##设置成手动，然后recv_fft 线程就不会往上传队列里面加
elif(frameFlag==10): #功率谱数据上传开启
self.sock.recv(5)
staticFileUp.setUploadMode(2)
elif(frameFlag==6): #模板下发
data=self.sock.recv(257)
for i in data:
ListData.append(ord(i))
self.outPoint.write(bytearray(ListData))
else:
data=self.sock.recv(15)
for i in data:
ListData.append(ord(i))
if(frameFlag==0x01):
### 扫频设置 ###
byte_to_pacakge=ByteToPackage()
obj=byte_to_pacakge.ByteToSweepRange(ListData)
staticFileUp.setUploadMode(obj.FileUploadMode-1)
staticFileUp.setUploadMode(obj.ExtractM)
begin_lab= 70+(obj.StartSectionNo-1 )*25 +\
((obj.HighStartFreq<<8)+(obj.LowStartFreq))*25.0/1024
end_lab = 70+(obj.EndSectionNo-1 )*25 +\
((obj.HighEndFreq <<8)+(obj.LowEndFreq))*25.0/1024
begin = 70+(obj.StartSectionNo-1 )*25
end = 70+(obj.EndSectionNo)*25
self.setTick(begin_lab,end_lab,begin,end)
self.outPoint.write(bytearray(ListData))
if (frameFlag == 0x02):
thread = thread_recv_iq.ReceiveIQThread(self.mainframe)
thread.start()
self.switch_to_transfer=1
'''
if(frameFlag==0x07):
####### 转UTC 格式 ########
hour=((ListData[8]&0x07)<<2)+(ListData[9]&0x03)
temp1=ListData[8]&0xF8
temp2=ListData[9]&0xFC
hour-=8
HourStruct=Hour5bit(hour,0)
ListData[8]=temp1+(HourStruct.Hour>>2)
ListData[9]=temp2+(HourStruct.Hour&0x03)
############################
'''
elif(frameFlag>=17 and frameFlag<=30): ##服务器查询指令下发####
print 'recv query'
data=self.sock.recv(5)
for i in data:
ListData.append(ord(i))
if(frameFlag==0x1A): ##查询上传是否开启
structObj=Query()
structObj.CommonTail=FrameTail(0,0,0xAA)
status=staticFileUp.getUploadMode()
if(status):
structObj.CommonHeader=\
FrameHeader(0x66,0x2A,staticVar.getid()&0x00FF,staticVar.getid()>>8)
else:
structObj.CommonHeader= \
FrameHeader(0x66, 0x2B, staticVar.getid() & 0x00FF, staticVar.getid() >> 8)
self.sock.sendall(bytearray(structObj))
else:
self.outPoint.write(bytearray(ListData))
li=0
count=0
while(count<3):
try:
li = list(staticVar.inPointRecv.read(260,100))
if(li): break
except Exception,e:
time.sleep(0.5)
count+= 1
print e
if(not li == 0):
if(len(li)==260):
self.sock.sendall(bytearray(li[0:-1]))
else:
self.sock.sendall(bytearray(li))
elif(frameFlag==0x41 or frameFlag==0x42):
print 'recv iq tdoa **'
data=self.sock.recv(15)
for i in data:
ListData.append(ord(i))
self.sock.recv(2)
self.specFrame.iq_sequence=(ListData[-2]<<8)+ListData[-3]
ListData[-3]=0
ListData[-2]=0
ListData[-1]=0xAA
# ListData[0]=0x55
if(frameFlag==0x42):
ListData[1]=0x07
####### 转UTC 格式 ########
hour=((ListData[8]&0x07)<<2)+(ListData[9]&0x03)
temp1=ListData[8]&0xF8
temp2=ListData[9]&0xFC
hour-=8
ListData[8]=temp1+(hour>>2)
ListData[9]=temp2+(hour&0x03)
############################
else:
ListData[1]=0x02
print 'ListData',ListData
self.outPoint.write(bytearray(ListData))
if(frameFlag == 0x42):
thread = thread_recv_iq.ReceiveIQThread(self.mainframe)
thread.start()
self.switch_to_transfer=1
def __init__( self, parent ):
wx.aui.AuiMDIParentFrame.__init__ ( self, parent, -1, title = wx.EmptyString, \
pos = wx.DefaultPosition, size = wx.Size( 887,545 ), \
style = wx.DEFAULT_FRAME_STYLE|wx.TAB_TRAVERSAL )
#######################################
matplotlib.rcParams["figure.facecolor"] = '#F2F5FA'
matplotlib.rcParams["axes.facecolor"] = '0'
matplotlib.rcParams["ytick.color"] = '0'
matplotlib.rcParams["xtick.color"] = '0'
matplotlib.rcParams["grid.color"] = 'w'
matplotlib.rcParams["text.color"] = 'w'
matplotlib.rcParams["figure.edgecolor"]="0"
matplotlib.rcParams["xtick.labelsize"]=12
matplotlib.rcParams["ytick.labelsize"]=12
matplotlib.rcParams["axes.labelsize"]=14
matplotlib.rcParams["grid.linestyle"]="-"
matplotlib.rcParams["grid.linewidth"]=0.5
matplotlib.rcParams["grid.color"]='#707070'
#######################################
# os.chdir("./apache-tomcat-7.0.68//bin//")
# os.chdir("../apache-tomcat-7.0.68//bin//")
os.system("startup.bat")
dirname, filename = os.path.split(os.path.abspath(sys.argv[0]))
os.chdir(dirname)
########### 初始化变量 #################
self.start_local_iq=0
########### 心跳相关 ##########
self.timer=0
self.count_heart = 0
self.frame_count=0 #打开的窗口数量#
self.FreqMin=70
self.FreqMax=5995
self.tail=FrameTail(0,0,0xAA)
#### 窗口################
self.SpecFrame=Spectrum_1.Spec(self)
self.SpecFrame.Activate()
self.WaterFrame=None
self.WaveFrame=None
self.MapFrame=None
#################################
staticVar.setid(11) #初始化id
print staticVar.getid()
# staticVar.initPort() #初始化硬件 端口
self.serverCom=ServerCommunication() #实例化服务器连接对象
########## 用于显示的 ############
self.show_recv_set=ShowRecvAndSet(self)
self.byte_to_package=ByteToPackage()
self.GPS_list=[] ##记录GPS 查询信息，发送给服务器
####上传的队列############
self.queueFFTUpload=Queue.Queue()
self.queueAbUpload=Queue.Queue()
###本地存储的队列#############
self.queueFFTLocalSave=Queue.Queue()
self.queueAbLocalSave=Queue.Queue()
### 画地图所使用的队列 （FFT的经纬度打包放进去）#########
self.queueRouteMap=Queue.Queue()
###### 创建数据表 #############
if(not os.path.isfile( "C:\\DataBase\\PortSRF.db" )):
os.mkdir(r'C:/DataBase/')
CreateAllTable.create_all_table()
##### thread 管理 #########
self.thread_recvfft=0
self.thread_upload=0
self.thread_station=0
self.thread_route_map=0
'''
if (configfpga.get_fx3_status()[0] == 0x04):
pass
else:
configfpga.load_fpga('c:/top_sao.bit')
wx.MessageBox('Config OK!',
'Alert', wx.ICON_EXCLAMATION | wx.STAY_ON_TOP)
'''
self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
self.m_toolBar1 = self.CreateToolBar( wx.TB_HORIZONTAL|wx.TB_TEXT, wx.ID_ANY )
self.m_start_hw = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"硬件上传", wx.Bitmap( ".//icons//green_2.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_connect = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"服务器连接", wx.Bitmap( ".//icons//link_start.jpg", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_sweep = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"扫频接收 ", wx.Bitmap( ".//icons//open_1.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_iq = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"定频接收 ", wx.Bitmap( ".//icons//link_a.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_press = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"压制发射", wx.Bitmap( ".//icons//red_1.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_map = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"地图服务", wx.Bitmap( ".//icons//Play_1.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_freqplan = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"频率规划", wx.Bitmap( ".//icons//Pause_1.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_remoteCtrl = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"远程控制", wx.Bitmap( ".//icons//laba_1.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_replay = self.m_toolBar1.AddLabelTool( wx.ID_ANY, u"历史回放", wx.Bitmap( ".//icons//local_read_a.png", wx.BITMAP_TYPE_ANY ), wx.NullBitmap, wx.ITEM_NORMAL, wx.EmptyString, wx.EmptyString, None )
self.m_toolBar1.Realize()
self.Centre( wx.BOTH )
# Connect Events
self.Bind(wx.EVT_CLOSE,self.OnDoClose)
self.Bind( wx.EVT_TOOL, self.m_start_hwOnToolClicked, id = self.m_start_hw.GetId() )
self.Bind( wx.EVT_TOOL, self.m_connectOnToolClicked, id = self.m_connect.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_sweepOnToolClicked, id = self.m_tool_sweep.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_iqOnToolClicked, id = self.m_tool_iq.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_pressOnToolClicked, id = self.m_tool_press.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_mapOnToolClicked, id = self.m_tool_map.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_freqplanOnToolClicked, id = self.m_tool_freqplan.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_remoteCtrlOnToolClicked, id = self.m_tool_remoteCtrl.GetId() )
self.Bind( wx.EVT_TOOL, self.m_tool_replayOnToolClicked, id = self.m_tool_replay.GetId() )
def FFTParse(self, ListSpec, ListAb):
for i in range(len(ListSpec)):
recvFFT = ListSpec[i]
recvAbList = ListAb[i]
TotalNum = recvFFT.SweepSectionTotalNum
blockFFT = FFTBlock(recvFFT.CurSectionNo, recvFFT.AllFreq)
blockAb = AbListBlock(recvAbList.CurSectionNo,
recvAbList.AbFreqNum, recvAbList.AllAbFreq)
self.SpecList.append(blockFFT)
self.SpecList.append(blockAb)
head=SpecUploadHeader(0x00,recvFFT.LonLatAlti,recvFFT.SweepRecvMode, \
recvFFT.FileUploadMode,staticFileUp.getChangeThres(),staticFileUp.getExtractM(),TotalNum)
###组合功率谱文件####
'''
Time=recvFFT.Time_
CommonHeader=recvFFT.CommonHeader
ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour
Minute=Time.Minute
Second=Time.Second
'''
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Minute = int(curTime[10:12])
Second = int(curTime[12:14])
ID = staticVar.getid()
if (self.startTrans == 0):
self.Second = Second
self.startTrans = 1
if ((self.startTrans == 1) and (self.Second != Second)):
self.count = 1
self.Second = Second
fileName=str(Year)+"-"+str(Month)+"-"+str(Day)+ \
"-"+str(Hour)+"-"+str(Minute)+"-"+str(Second)+"-"+str(self.count)+'-'+str(ID)
if (recvFFT.CommonHeader.FunctionPara == 0x51):
fileName += '-fine.pwr'
else:
fileName += '-coarse.pwr'
fileNameLen = len(fileName)
fileContentLen = sizeof(head) + (sizeof(blockFFT) +
sizeof(blockAb)) * TotalNum + 2
print fileName
print fileNameLen
print fileContentLen
##########SaveToLocal#####################
# fid=open(".\LocalData\\"+ fileName,'wb+')
fid = open(self.dir_spec + fileName, 'wb+')
fid.write(bytearray(head))
for i in xrange(len(self.SpecList) / 2):
fid.write(bytearray(self.SpecList[2 * i]))
fid.write(struct.pack("!B", 0xFF))
for i in xrange(len(self.SpecList) / 2):
fid.write(bytearray(self.SpecList[2 * i + 1]))
fid.write(struct.pack("!B", 0x00))
fid.close()
#########################################
self.SpecList = []
self.count += 1
self.countFFT += 1
print 'self.countFFT', self.countFFT
def __init__(self, parent):
#### 一些参数值 ######################
self.freq_s = 70
self.freq_e = 5995
self.upload_mode = 0
self.extract_m = 1
self.changethres = 10
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.tail = FrameTail(0, 0, 0xAA)
self.outPoint = staticVar.outPoint
self.parent = parent
self.rbw_flg = 0
print self.id
#### show #########
self.show_recv_set = self.parent.show_recv_set
self.byte_to_package = self.parent.byte_to_package
### 编码表 ###
self.dictThres = {
3: 0x00,
10: 0x01,
20: 0x02,
25: 0x03,
30: 0x04,
40: 0x05
}
##########################################
wx.Dialog.__init__(self,
parent,
id=wx.ID_ANY,
title=wx.EmptyString,
pos=wx.DefaultPosition,
size=wx.Size(404, 365),
style=wx.DEFAULT_DIALOG_STYLE)
self.SetSizeHintsSz(wx.DefaultSize, wx.DefaultSize)
gSizer2 = wx.GridSizer(1, 1, 0, 0)
self.m_notebook3 = wx.Notebook(self, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_notebook3.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
self.p_sweep_set = wx.Panel(self.m_notebook3, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer3 = wx.GridSizer(6, 2, 0, 0)
# gSizer3.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.text = wx.StaticText(self.p_sweep_set, wx.ID_ANY, u"扫频范围：",
wx.DefaultPosition, wx.DefaultSize, 0)
self.text_freq_range = wx.StaticText(self.p_sweep_set, wx.ID_ANY,
'70-6G', wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer3.Add(self.text, 0, wx.EXPAND, 5)
gSizer3.Add(self.text_freq_range, 0, wx.EXPAND, 5)
self.m_staticText6 = wx.StaticText(self.p_sweep_set, wx.ID_ANY,
u"扫频接收模式", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText6.Wrap(-1)
gSizer3.Add(self.m_staticText6, 0, wx.ALL, 5)
m_sweep_modeChoices = [u"全频段", u"用户自定义频段", u"标准业务频段"]
self.m_sweep_mode = wx.ComboBox(self.p_sweep_set, wx.ID_ANY, u"全频段",
wx.DefaultPosition, wx.DefaultSize,
m_sweep_modeChoices, 0)
self.m_sweep_mode.SetSelection(0)
gSizer3.Add(self.m_sweep_mode, 0, wx.ALL, 5)
self.m_staticText9 = wx.StaticText(self.p_sweep_set, wx.ID_ANY,
u"文件上传模式", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText9.Wrap(-1)
gSizer3.Add(self.m_staticText9, 0, wx.ALL, 5)
m_upload_modeChoices = [u"手动上传", u"不定时自动上传", u"抽取定时自动上传"]
self.m_upload_mode = wx.ComboBox(self.p_sweep_set, wx.ID_ANY, u"手动上传",
wx.DefaultPosition, wx.DefaultSize,
m_upload_modeChoices, 0)
self.m_upload_mode.SetSelection(0)
gSizer3.Add(self.m_upload_mode, 0, wx.ALL, 5)
self.m_staticText11 = wx.StaticText(self.p_sweep_set, wx.ID_ANY,
u"文件上传抽取倍率（1-63）",
wx.DefaultPosition, wx.DefaultSize,
0)
self.m_staticText11.Wrap(-1)
gSizer3.Add(self.m_staticText11, 0, wx.ALL, 5)
self.m_extract_M = wx.TextCtrl(self.p_sweep_set, wx.ID_ANY, u"1",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer3.Add(self.m_extract_M, 0, wx.ALL, 5)
self.m_staticText10 = wx.StaticText(self.p_sweep_set, wx.ID_ANY,
u"数据变化判定门限", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText10.Wrap(-1)
gSizer3.Add(self.m_staticText10, 0, wx.ALL, 5)
m_change_thredChoices = [u"10", u"20"]
self.m_change_thred = wx.ComboBox(self.p_sweep_set, wx.ID_ANY, u"10",
wx.DefaultPosition, wx.DefaultSize,
m_change_thredChoices, 0)
self.m_change_thred.SetSelection(0)
gSizer3.Add(self.m_change_thred, 0, wx.ALL, 5)
self.btn_set = wx.Button(self.p_sweep_set, wx.ID_ANY, u"设置",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer3.Add(self.btn_set, 0, wx.ALL, 5)
self.btn_cancel = wx.Button(self.p_sweep_set, wx.ID_ANY, u"取消",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer3.Add(self.btn_cancel, 0, wx.ALL, 5)
self.p_sweep_set.SetSizer(gSizer3)
self.p_sweep_set.Layout()
gSizer3.Fit(self.p_sweep_set)
self.m_notebook3.AddPage(self.p_sweep_set, u"扫频设置", False)
self.p_sweep_param = wx.Panel(self.m_notebook3, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer4 = wx.GridSizer(7, 2, 0, 0)
self.m_check_recvgain = wx.CheckBox(self.p_sweep_param, wx.ID_ANY,
u" 接收增益（dB）", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_recvgain, 0, wx.ALL, 5)
self.m_slider_recvgain = wx.Slider(
self.p_sweep_param, wx.ID_ANY, 7, -1, 73, wx.DefaultPosition,
wx.Size(150, -1), wx.SL_HORIZONTAL | wx.SL_LABELS | wx.SL_SELRANGE)
gSizer4.Add(self.m_slider_recvgain, 0, wx.ALL, 5)
self.m_check_channelgain = wx.CheckBox(self.p_sweep_param, wx.ID_ANY,
u" 通道接收增益表",
wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_channelgain, 0, wx.ALL, 5)
m_combo_channelgainChoices = ['SRF201', 'SRF301']
self.m_combo_channelgain = wx.ComboBox(self.p_sweep_param, wx.ID_ANY,
'SRF201', wx.DefaultPosition,
wx.DefaultSize,
m_combo_channelgainChoices, 0)
gSizer4.Add(self.m_combo_channelgain, 0, wx.ALL, 5)
self.m_check_antgain = wx.CheckBox(self.p_sweep_param, wx.ID_ANY,
u"天线接收增益表", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_antgain, 0, wx.ALL, 5)
m_combo_antgainChoices = [u"超短套筒天线", u"超短螺旋天线", u"单鞭螺旋天线", u"平面双锥天线", u"AH-8000", u"AH-7000", \
u"TQJ-1000", u"国人对数", u"汇讯通对数", u"BTA-BicoLog", u"LX-520", u"LX-840", u"LX-1080"]
self.m_combo_antgain = wx.ComboBox(self.p_sweep_param, wx.ID_ANY,
u"超短套筒天线", wx.DefaultPosition,
wx.DefaultSize,
m_combo_antgainChoices, 0)
gSizer4.Add(self.m_combo_antgain, 0, wx.ALL, 5)
line = wx.StaticLine(self.p_sweep_param,
-1, (0, 30), (200, 1),
style=wx.LI_HORIZONTAL)
line2 = wx.StaticLine(self.p_sweep_param,
-1, (0, 30), (200, 1),
style=wx.LI_HORIZONTAL)
gSizer4.Add(line, 0, wx.ALL, 5)
gSizer4.Add(line2, 0, wx.ALL, 5)
self.m_check_adapt = wx.CheckBox(self.p_sweep_param, wx.ID_ANY,
u" 自适应门限（dB）", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_adapt, 0, wx.ALL, 5)
m_combo_adaptChoices = [u"3 ", u"10", u"20", u"25", u"30", u"40"]
self.m_combo_adapt = wx.ComboBox(self.p_sweep_param, wx.ID_ANY,
u"20", wx.DefaultPosition,
wx.Size(110,
-1), m_combo_adaptChoices, 0)
self.m_combo_adapt.SetSelection(2)
gSizer4.Add(self.m_combo_adapt, 0, wx.ALL, 5)
self.m_check_block = wx.CheckBox(self.p_sweep_param, wx.ID_ANY,
u" 模板检测", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_check_block, 0, wx.ALL, 5)
self.m_btn_block = wx.Button(self.p_sweep_param, wx.ID_ANY, u"设置模板检测值",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer4.Add(self.m_btn_block, 0, wx.ALL, 5)
# self.m_text_fix = wx.TextCtrl( self.p_sweep_param, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer4.Add( self.m_text_fix, 0, wx.ALL, 5 )
self.m_button_paramSet = wx.Button(self.p_sweep_param, wx.ID_ANY,
u"确定", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer4.Add(self.m_button_paramSet, 0, wx.ALL, 5)
self.m_button_cancel = wx.Button(self.p_sweep_param, wx.ID_ANY, u"取消",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer4.Add(self.m_button_cancel, 0, wx.ALL, 5)
self.p_sweep_param.SetSizer(gSizer4)
self.p_sweep_param.Layout()
gSizer4.Fit(self.p_sweep_param)
self.m_notebook3.AddPage(self.p_sweep_param, u"参数设置", True)
self.p_sweep_display = wx.Panel(self.m_notebook3, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer41 = wx.GridSizer(7, 1, 0, 0)
img_waterfall = wx.Image('.//icons//waterfull.png', wx.BITMAP_TYPE_ANY)
bmp_waterfall = wx.StaticBitmap(self.p_sweep_display, -1,
wx.BitmapFromImage(img_waterfall))
img_list = wx.Image('.//icons//list.png', wx.BITMAP_TYPE_ANY)
bmp_list = wx.StaticBitmap(self.p_sweep_display, -1,
wx.BitmapFromImage(img_list))
img_stat = wx.Image('.//icons//statistics.png', wx.BITMAP_TYPE_ANY)
bmp_stat = wx.StaticBitmap(self.p_sweep_display, -1,
wx.BitmapFromImage(img_stat))
# self.check_spec = wx.CheckBox( self.p_sweep_display, wx.ID_ANY, u" 功率谱图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer41.Add( self.check_spec, 0, wx.ALL, 5 )
self.check_water = wx.CheckBox(self.p_sweep_display, wx.ID_ANY,
u" 瀑布图", wx.DefaultPosition,
wx.DefaultSize, 0)
gSizer41.Add(bmp_waterfall, 0, wx.LEFT, 30)
gSizer41.Add(self.check_water, 0, wx.ALL, 5)
self.toji = wx.CheckBox(self.p_sweep_display, wx.ID_ANY, u" 统计结果显示",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer41.Add(bmp_stat, 0, wx.LEFT, 30)
gSizer41.Add(self.toji, 0, wx.ALL, 5)
self.list = wx.CheckBox(self.p_sweep_display, wx.ID_ANY, u" 列表显示",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer41.Add(bmp_list, 0, wx.LEFT, 30)
gSizer41.Add(self.list, 0, wx.ALL, 5)
self.btn_display = wx.Button(self.p_sweep_display, wx.ID_ANY, u"确定",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer41.Add(self.btn_display, 0, wx.ALL, 5)
self.p_sweep_display.SetSizer(gSizer41)
self.p_sweep_display.Layout()
gSizer41.Fit(self.p_sweep_display)
self.m_notebook3.AddPage(self.p_sweep_display, u"扫频显示", False)
self.p_seep_query = wx.Panel(self.m_notebook3, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
# self.p_seep_query.SetFont( wx.Font( 12, 74, 90, 90, False, "微软雅黑" ) )
bSizer2 = wx.BoxSizer(wx.VERTICAL)
m_radio_queryChoices = [
u"扫频范围", u"接收增益", u"工作状态", u"检测门限", u"接收通道增益修正表", u"天线增益修正表"
]
self.m_radio_query = wx.RadioBox(self.p_seep_query, wx.ID_ANY, u"查询项",
wx.DefaultPosition, wx.DefaultSize,
m_radio_queryChoices, 1,
wx.RA_SPECIFY_COLS)
self.m_radio_query.SetSelection(0)
bSizer2.Add(self.m_radio_query, 0, wx.ALL | wx.EXPAND, 5)
self.btn_query = wx.Button(self.p_seep_query, wx.ID_ANY, u"查询",
wx.DefaultPosition, wx.DefaultSize, 0)
# self.btn_query.SetFont( wx.Font( 9, 74, 90, 90, False, "微软雅黑" ) )
bSizer2.Add(self.btn_query, 0, wx.ALL, 5)
self.p_seep_query.SetSizer(bSizer2)
self.p_seep_query.Layout()
bSizer2.Fit(self.p_seep_query)
self.m_notebook3.AddPage(self.p_seep_query, u"查询", False)
gSizer2.Add(self.m_notebook3, 1, wx.EXPAND | wx.ALL, 5)
self.SetSizer(gSizer2)
self.Layout()
self.Centre(wx.BOTH)
# Connect Events
self.m_sweep_mode.Bind(wx.EVT_COMBOBOX, self.m_sweep_modeOnCombobox)
self.m_upload_mode.Bind(wx.EVT_COMBOBOX, self.m_upload_modeOnCombobox)
self.btn_set.Bind(wx.EVT_BUTTON, self.btn_setOnButtonClick)
self.btn_cancel.Bind(wx.EVT_BUTTON, self.btn_cancelOnButtonClick)
self.m_btn_block.Bind(wx.EVT_BUTTON, self.btn_setBlockThres)
self.m_button_paramSet.Bind(wx.EVT_BUTTON,
self.m_button_paramSetOnButtonClick)
self.m_button_cancel.Bind(wx.EVT_BUTTON,
self.m_button_cancelOnButtonClick)
self.btn_display.Bind(wx.EVT_BUTTON, self.btn_displayOnButtonClick)
self.m_radio_query.Bind(wx.EVT_RADIOBOX, self.m_radioBox1OnRadioBox)
self.btn_query.Bind(wx.EVT_BUTTON, self.btn_queryOnButtonClick)
def SaveIQ(self,recvRec):
self.IQ2List = []
block = IQ2Block(recvRec.IQDataAmp)
self.IQ2List.append(block)
head = IQ2UploadHeader(0x00, recvRec.LonLatAlti, recvRec.ParamNoUp)
block = IQ2Block(recvRec.IQDataAmp)
##### ���iq2�ļ� ################
count = (recvRec.SecondCount[0] << 24) + \
(recvRec.SecondCount[1] << 16) + \
(recvRec.SecondCount[2] << 8) + \
(recvRec.SecondCount[3])
Time = recvRec.Time
Year = (Time.HighYear << 4) + Time.LowYear
Month = Time.Month
Day = Time.Day
Hour = (Time.HighHour << 2) + Time.LowHour
Minute = Time.Minute
Second = Time.Second
ID = staticVar.getid()
###########将读取的UTC时间转换为本地时间############
time_recv_utc = str(Year) + '-' + str(Month) + '-' + str(Day) + ' ' + str(Hour) + ':' + str(Minute) + ':' + str(Second)
time_recv_utc_stamp = time.mktime(time.strptime(time_recv_utc,"%Y-%m-%d %H:%M:%S"))
time_utc = datetime.datetime.utcfromtimestamp(time_recv_utc_stamp)
time_local = time_utc + datetime.timedelta(hours = 16)
Year = str(time_local)[0:4]
Month = str(time_local)[5:7]
Day = str(time_local)[8:10]
Hour = str(time_local)[11:13]
Minute = str(time_local)[14:16]
Second = str(time_local)[17:19]
############################################
if(not int(Year) == 2016):
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = curTime[0:4]
Month = curTime[4:6]
Day = curTime[6:8]
Hour = curTime[8:10]
Minute = curTime[10:12]
Second = curTime[12:14]
fileName = Year + "-" + Month + "-" + Day + \
"-" + Hour + "-" + Minute + \
"-" + Second + '-' + str(count) + '-' + str(ID) + \
'.iq2'
print fileName
self.count_iq2_file = self.count_iq2_file + 1
# print self.count_iq2_file
########### SaveToLocal(tdoa方式存本地)####################
# fid = open(".\LocalData\\IQ2\\" + fileName,'wb')
# d = dict(head = head, block = block)
# pickle.dump(d, fid)
# fid.close()
############ SaveToLocal(iq方式存本地)#####################
fid = open(".\LocalData\\IQ2\\" + fileName,'wb')
fid.write(bytearray(head))
for block in self.IQ2List:
fid.write(bytearray(block))
fid.write(struct.pack("!B", 0x00))
fid.close()
del self.IQ2List
def ConnectCore(self):
flag_sock=0
flag_sockFile=0
while(1):
if(staticVar.sock==0 and flag_sock==0):
try:
self.serverCom.ConnectToServer(9000)
staticVar.sock=self.serverCom.sock
flag_sock=1
except Exception:
(ErrorType, ErrorValue, ErrorTB) = sys.exc_info()
wx.MessageBox('Connect To Monitor Server Failure!\n'+
str(ErrorValue[0])+' '+str(ErrorValue[1]),
'Alert', wx.ICON_EXCLAMATION | wx.STAY_ON_TOP)
if(staticVar.sockFile==0 and flag_sockFile==0):
try:
self.serverCom.ConnectToServer(9988)
staticVar.sockFile=self.serverCom.sockFile
flag_sockFile=1
except Exception:
(ErrorType, ErrorValue, ErrorTB) = sys.exc_info()
wx.MessageBox('Connect To File Server Failure!\n'+
str(ErrorValue[0])+' '+str(ErrorValue[1]),
'Alert', wx.ICON_INFORMATION | wx.STAY_ON_TOP)
if(flag_sock and flag_sockFile):
break
time.sleep(5)
connect=ConnectServer()
connect.CommonHeader=FrameHeader(0x55,0xA1,staticVar.getid()&0x00FF,staticVar.getid()>>8)
connect.CommonTail=self.tail
if(self.GPS_list==[]):
#临时加的测试
self.GPS_list=[0]*9
#############################
Lon=114.4202
Lat=30.5100
Alti=35
Lon_fen=0.4202*60
Lat_fen=0.51*60
Lon_fen_I=int(Lon_fen)
Lon_fen_f=int((Lon_fen-int(Lon_fen))*1000)
Lat_fen_I=int(Lat_fen)
Lat_fen_f=int((Lat_fen-int(Lat_fen))*1000)
self.GPS_list[1]=114
self.GPS_list[2]=(Lon_fen_I<<2)+(Lon_fen_f>>8)
self.GPS_list[3]=Lon_fen_f&0x00FF
self.GPS_list[4]=30
self.GPS_list[5]=(Lat_fen_I<<2)+(Lat_fen_f>>8)
self.GPS_list[6]=Lat_fen_f&0x00FF
self.GPS_list[8]=35
list =self.GPS_list
connect.LonLatAlti=LonLatAltitude(list[0],list[1],list[2],list[3],list[4]>>7,list[4]&0x7F,
list[5],list[6],list[7]>>7,list[7]&0x7F,list[8])
self.serverCom.SendQueryData(connect)
self.thread_station=ReceiveServerData(self)
self.thread_station.setDaemon(True)
self.thread_station.start()
self.thread_upload = SendFileThread(self.SpecFrame, self.queueFFTUpload,
self.queueAbUpload)
self.thread_upload.setDaemon(True)
self.thread_upload.start()
self.timer = threading.Timer(15, self.hello, [])
self.timer.start()
'''
thread_timer=Timer(self.thread_upload,self.thread_station)
thread_timer.setDaemon(True)
thread_timer.start()
'''
self.m_connect.Enable(False)
def __init__(self, parent):
wx.aui.AuiMDIParentFrame.__init__ ( self, parent, -1, title = wx.EmptyString, \
pos = wx.DefaultPosition, size = wx.Size( 887,545 ), \
style = wx.DEFAULT_FRAME_STYLE|wx.TAB_TRAVERSAL )
#######################################
matplotlib.rcParams["figure.facecolor"] = '#F2F5FA'
matplotlib.rcParams["axes.facecolor"] = '0'
matplotlib.rcParams["ytick.color"] = '0'
matplotlib.rcParams["xtick.color"] = '0'
matplotlib.rcParams["grid.color"] = 'w'
matplotlib.rcParams["text.color"] = 'w'
matplotlib.rcParams["figure.edgecolor"] = "0"
matplotlib.rcParams["xtick.labelsize"] = 12
matplotlib.rcParams["ytick.labelsize"] = 12
matplotlib.rcParams["axes.labelsize"] = 14
matplotlib.rcParams["grid.linestyle"] = "-"
matplotlib.rcParams["grid.linewidth"] = 0.5
matplotlib.rcParams["grid.color"] = '#707070'
#######################################
# os.chdir("./apache-tomcat-7.0.68//bin//")
# os.chdir("../apache-tomcat-7.0.68//bin//")
os.system("startup.bat")
dirname, filename = os.path.split(os.path.abspath(sys.argv[0]))
os.chdir(dirname)
########### 初始化变量 #################
self.start_local_iq = 0
########### 心跳相关 ##########
self.timer = 0
self.count_heart = 0
self.frame_count = 0 #打开的窗口数量#
self.FreqMin = 70
self.FreqMax = 5995
self.tail = FrameTail(0, 0, 0xAA)
#### 窗口################
self.SpecFrame = Spectrum_1.Spec(self)
self.SpecFrame.Activate()
self.WaterFrame = None
self.WaveFrame = None
self.MapFrame = None
#################################
staticVar.setid(11) #初始化id
print staticVar.getid()
# staticVar.initPort() #初始化硬件 端口
self.serverCom = ServerCommunication() #实例化服务器连接对象
########## 用于显示的 ############
self.show_recv_set = ShowRecvAndSet(self)
self.byte_to_package = ByteToPackage()
self.GPS_list = [] ##记录GPS 查询信息，发送给服务器
####上传的队列############
self.queueFFTUpload = Queue.Queue()
self.queueAbUpload = Queue.Queue()
###本地存储的队列#############
self.queueFFTLocalSave = Queue.Queue()
self.queueAbLocalSave = Queue.Queue()
### 画地图所使用的队列 （FFT的经纬度打包放进去）#########
self.queueRouteMap = Queue.Queue()
###### 创建数据表 #############
if (not os.path.isfile("C:\\DataBase\\PortSRF.db")):
os.mkdir(r'C:/DataBase/')
CreateAllTable.create_all_table()
##### thread 管理 #########
self.thread_recvfft = 0
self.thread_upload = 0
self.thread_station = 0
self.thread_route_map = 0
'''
if (configfpga.get_fx3_status()[0] == 0x04):
pass
else:
configfpga.load_fpga('c:/top_sao.bit')
wx.MessageBox('Config OK!',
'Alert', wx.ICON_EXCLAMATION | wx.STAY_ON_TOP)
'''
self.SetSizeHintsSz(wx.DefaultSize, wx.DefaultSize)
self.m_toolBar1 = self.CreateToolBar(wx.TB_HORIZONTAL | wx.TB_TEXT,
wx.ID_ANY)
self.m_start_hw = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"硬件上传",
wx.Bitmap(".//icons//green_2.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_connect = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"服务器连接",
wx.Bitmap(".//icons//link_start.jpg",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_sweep = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"扫频接收 ",
wx.Bitmap(".//icons//open_1.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_iq = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"定频接收 ",
wx.Bitmap(".//icons//link_a.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_press = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"压制发射",
wx.Bitmap(".//icons//red_1.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_map = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"地图服务",
wx.Bitmap(".//icons//Play_1.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_freqplan = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"频率规划",
wx.Bitmap(".//icons//Pause_1.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_remoteCtrl = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"远程控制",
wx.Bitmap(".//icons//laba_1.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_toolBar1.AddSeparator()
self.m_tool_replay = self.m_toolBar1.AddLabelTool(
wx.ID_ANY, u"历史回放",
wx.Bitmap(".//icons//local_read_a.png",
wx.BITMAP_TYPE_ANY), wx.NullBitmap, wx.ITEM_NORMAL,
wx.EmptyString, wx.EmptyString, None)
self.m_toolBar1.Realize()
self.Centre(wx.BOTH)
# Connect Events
self.Bind(wx.EVT_CLOSE, self.OnDoClose)
self.Bind(wx.EVT_TOOL,
self.m_start_hwOnToolClicked,
id=self.m_start_hw.GetId())
self.Bind(wx.EVT_TOOL,
self.m_connectOnToolClicked,
id=self.m_connect.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_sweepOnToolClicked,
id=self.m_tool_sweep.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_iqOnToolClicked,
id=self.m_tool_iq.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_pressOnToolClicked,
id=self.m_tool_press.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_mapOnToolClicked,
id=self.m_tool_map.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_freqplanOnToolClicked,
id=self.m_tool_freqplan.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_remoteCtrlOnToolClicked,
id=self.m_tool_remoteCtrl.GetId())
self.Bind(wx.EVT_TOOL,
self.m_tool_replayOnToolClicked,
id=self.m_tool_replay.GetId())
def FFTParse(self,ListSpec,ListAb):
for i in range(len(ListSpec)):
recvFFT=ListSpec[i]
recvAbList=ListAb[i]
TotalNum=recvFFT.SweepSectionTotalNum
blockFFT=FFTBlock(recvFFT.CurSectionNo,recvFFT.AllFreq)
blockAb=AbListBlock(recvAbList.CurSectionNo,recvAbList.AbFreqNum,recvAbList.AllAbFreq)
self.SpecList.append(blockFFT)
self.SpecList.append(blockAb)
head=SpecUploadHeader(0x00,recvFFT.LonLatAlti,recvFFT.SweepRecvMode, \
recvFFT.FileUploadMode,self.changeThres,self.extractM,TotalNum)
###组合功率谱文件####
Time=recvFFT.Time_
CommonHeader=recvFFT.CommonHeader
ID=(CommonHeader.HighDeviceID<<8)+CommonHeader.LowDeviceID
Year=(Time.HighYear<<4)+Time.LowYear
Month=Time.Month
Day=Time.Day
Hour=(Time.HighHour<<2)+Time.LowHour+8
Minute=Time.Minute
Second=Time.Second
if(not Year==2016):
curTime=time.strftime('%Y%m%d%H%M%S',time.localtime(time.time()))
Year=int(curTime[0:4])
Month=int(curTime[4:6])
Day=int(curTime[6:8])
Hour=int(curTime[8:10])
Minute=int(curTime[10:12])
Second=int(curTime[12:14])
ID=staticVar.getid()
if(self.startTrans==0):
self.Second=Second
self.startTrans=1
if((self.startTrans==1) and (self.Second!=Second)):
self.count=1
self.Second=Second
fileName=str(Year)+"-"+str(Month)+"-"+str(Day)+ \
"-"+str(Hour)+"-"+str(Minute)+"-"+str(Second)+"-"+str(self.count)+'-'+str(ID)
if(recvFFT.CommonHeader.FunctionPara==0x51):
fileName+='-fine.pwr'
else:
fileName+='-coarse.pwr'
fileNameLen=len(fileName)
fileContentLen=sizeof(head)+(sizeof(blockFFT)+sizeof(blockAb))*TotalNum+2
print fileName
# print fileNameLen
# print fileContentLen
############SendToServer###################
if(self.sockFile):
try:
str1=struct.pack("!2BHQ",0x00,0xFF,fileNameLen,fileContentLen)
self.sockFile.send(str1+fileName)
self.sockFile.send(bytearray(head))
for i in xrange(len(self.SpecList)/2):
self.sockFile.send(bytearray(self.SpecList[2*i]))
self.sockFile.send(struct.pack("!B",0xFF))
for i in xrange(len(self.SpecList)/2):
self.sockFile.send(bytearray(self.SpecList[2*i+1]))
self.sockFile.send(struct.pack("!B",0x00))
except socket.error,e:
print 'socket_error',e
staticVar.sockFile=0
self.sockFile=0
def __init__( self, parent ):
wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = u"定频接收", pos = wx.DefaultPosition, size = wx.Size( 387,392 ), style = wx.DEFAULT_DIALOG_STYLE )
##############################
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.tail=FrameTail(0,0,0xAA)
self.outPoint=staticVar.outPoint
###############################
self.parent=parent
#### show #########
self.show_recv_set=self.parent.show_recv_set
self.byte_to_package=self.parent.byte_to_package
self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
gSizer1 = wx.GridSizer( 1, 1, 0, 0 )
self.m_notebook1 = wx.Notebook( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_notebook1.SetFont(wx.Font( 10,wx.ROMAN,wx.NORMAL,wx.LIGHT,underline=False,faceName=u"微软雅黑",encoding=wx.FONTENCODING_DEFAULT ))
self.m_panel1 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer2 = wx.GridSizer( 9, 3, 0, 0 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_check_freq1 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第一个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq1, 0, wx.ALL, 5 )
self.m_text_freq1 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq1, 0, wx.ALL, 5 )
self.m_staticText6 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"Mhz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText6.Wrap( -1 )
gSizer2.Add( self.m_staticText6, 0, wx.ALL, 5 )
self.m_check_freq2 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第二个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq2, 0, wx.ALL, 5 )
self.m_text_freq2 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq2, 0, wx.ALL, 5 )
self.m_staticText7 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"Mhz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText7.Wrap( -1 )
gSizer2.Add( self.m_staticText7, 0, wx.ALL, 5 )
self.m_check_freq3 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第三个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq3, 0, wx.ALL, 5 )
self.m_text_freq3 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq3, 0, wx.ALL, 5 )
self.m_staticText8 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"Mhz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText8.Wrap( -1 )
gSizer2.Add( self.m_staticText8, 0, wx.ALL, 5 )
self.m_staticText11 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"IQ 带宽/数据率", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText11.Wrap( -1 )
gSizer2.Add( self.m_staticText11, 0, wx.ALL, 5 )
m_choice_bwChoices = [ u"5", u"2.5", u"1", u"0.5", u"0.1" ]
self.m_choice_bw = wx.Choice( self.m_panel1, wx.ID_ANY, wx.DefaultPosition, wx.Size( 110,-1 ), m_choice_bwChoices, 0 )
self.m_choice_bw.SetSelection( 0 )
gSizer2.Add( self.m_choice_bw, 0, wx.ALL, 5 )
self.m_staticText12 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"Mhz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText12.Wrap( -1 )
gSizer2.Add( self.m_staticText12, 0, wx.ALL, 5 )
self.m_staticText13 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"上传数据块个数", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText13.Wrap( -1 )
gSizer2.Add( self.m_staticText13, 0, wx.ALL, 5 )
self.m_text_up_num = wx.TextCtrl( self.m_panel1, wx.ID_ANY, u"1", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_up_num, 0, wx.ALL, 5 )
self.m_staticText14 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"(<=256)", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText14.Wrap( -1 )
gSizer2.Add( self.m_staticText14, 0, wx.ALL, 5 )
self.m_staticText15 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"延时时间", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText15.Wrap( -1 )
gSizer2.Add( self.m_staticText15, 0, wx.ALL, 5 )
self.m_text_dtime = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_dtime, 0, wx.ALL, 5 )
self.m_staticText16 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"s", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText16.Wrap( -1 )
gSizer2.Add( self.m_staticText16, 0, wx.ALL, 5 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_btn_set = wx.Button( self.m_panel1, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_btn_set, 0, wx.ALL, 5 )
self.m_btn_cancel = wx.Button( self.m_panel1, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_btn_cancel, 0,wx.ALL, 5 )
self.m_panel1.SetSizer( gSizer2 )
self.m_panel1.Layout()
gSizer2.Fit( self.m_panel1 )
self.m_notebook1.AddPage( self.m_panel1, u"定频设置", False )
self.m_panel2 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.Size( 200,-1 ), wx.TAB_TRAVERSAL )
gSizer4 = wx.GridSizer( 9, 3, 0, 0 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_staticText19 = wx.StaticText( self.m_panel2, wx.ID_ANY, u"接收增益（dB）", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText19.Wrap( -1 )
gSizer4.Add( self.m_staticText19, 0, wx.ALIGN_CENTER|wx.ALIGN_RIGHT|wx.ALIGN_TOP|wx.ALL, 5 )
self.m_slider_gain = wx.Slider( self.m_panel2, wx.ID_ANY, 7, -1, 73, wx.Point( -1,-1 ), wx.Size( 150,20 ), wx.SL_HORIZONTAL|wx.SL_LABELS|wx.SL_SELRANGE )
gSizer4.Add( self.m_slider_gain, 0, wx.ALIGN_CENTER|wx.ALL, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer4.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.btn_ok_param = wx.Button( self.m_panel2, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.btn_ok_param, 0, wx.ALL, 5 )
self.btn_cancel_param = wx.Button( self.m_panel2, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer4.Add( self.btn_cancel_param, 0, wx.ALL, 5 )
self.m_panel2.SetSizer( gSizer4 )
self.m_panel2.Layout()
self.m_notebook1.AddPage( self.m_panel2, u"参数设置", False )
self.m_panel3 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer5 = wx.GridSizer( 9, 3, 0, 0 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_check_wave = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"波形图", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_wave, 0, wx.ALL, 5 )
self.m_check_spec = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"功率谱", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_spec, 0, wx.ALL, 5 )
self.m_check_water = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"瀑布图", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_water, 0, wx.ALL, 5 )
img_waveform = wx.Image('..//icons//waveform.png',wx.BITMAP_TYPE_ANY)
bmp_waveform = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_waveform))
gSizer5.Add(bmp_waveform , 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
img_spectrum = wx.Image('..//icons//spectrum.png',wx.BITMAP_TYPE_ANY)
bmp_spectrum = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_spectrum))
gSizer5.Add(bmp_spectrum , 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
img_waterfall = wx.Image('..//icons//waterfull.png',wx.BITMAP_TYPE_ANY)
bmp_waterfall = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_waterfall))
gSizer5.Add(bmp_waterfall, 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_check_CCDF = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"CCDF", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_CCDF, 0, wx.ALL, 5 )
self.m_check_eye = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"眼图", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_eye, 0, wx.ALL, 5 )
self.m_check_constel = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"星座图", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.m_check_constel, 0, wx.ALL, 5 )
img_ccdf = wx.Image('..//icons//ccdf.png',wx.BITMAP_TYPE_ANY)
bmp_ccdf = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_ccdf))
gSizer5.Add(bmp_ccdf, 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
img_eye = wx.Image('..//icons//eye.png',wx.BITMAP_TYPE_ANY)
bmp_eye = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_eye))
gSizer5.Add(bmp_eye, 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
img_constellation = wx.Image('..//icons//constellation.png',wx.BITMAP_TYPE_ANY)
bmp_constellation = wx.StaticBitmap(self.m_panel3,-1,wx.BitmapFromImage(img_constellation))
gSizer5.Add(bmp_constellation, 0 , wx.ALIGN_TOP|wx.ALIGN_CENTER_HORIZONTAL)
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.btn_display = wx.Button( self.m_panel3, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.btn_display, 0, wx.ALL, 5 )
self.btn_display_cancel = wx.Button( self.m_panel3, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer5.Add( self.btn_display_cancel, 0, wx.ALL, 5 )
self.m_panel3.SetSizer( gSizer5 )
self.m_panel3.Layout()
gSizer5.Fit( self.m_panel3 )
self.m_notebook1.AddPage( self.m_panel3, u"窗口显示", False )
self.m_panel4 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer6 = wx.GridSizer( 5, 1, 0, 0 )
gSizer6.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
m_radio_chooseChoices = [ u"定频中心频率", u"定频公共参数" ]
self.m_radio_choose = wx.RadioBox( self.m_panel4, wx.ID_ANY, u"查询项", wx.DefaultPosition, wx.DefaultSize, m_radio_chooseChoices, 1, wx.RA_SPECIFY_COLS )
self.m_radio_choose.SetSelection( 0 )
gSizer6.Add( self.m_radio_choose, 0, wx.ALL, 5 )
gSizer6.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer6.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_btn_query = wx.Button( self.m_panel4, wx.ID_ANY, u"查询", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer6.Add( self.m_btn_query, 0, wx.ALIGN_CENTER_HORIZONTAL, 5 )
self.m_panel4.SetSizer( gSizer6 )
self.m_panel4.Layout()
gSizer6.Fit( self.m_panel4 )
self.m_notebook1.AddPage( self.m_panel4, u"查询", True )
gSizer1.Add( self.m_notebook1, 1, wx.EXPAND |wx.ALL, 5 )
self.SetSizer( gSizer1 )
self.Layout()
self.Centre( wx.BOTH )
#Events
self.m_btn_set.Bind( wx.EVT_BUTTON, self.m_btn_setOnButtonClick )
self.btn_ok_param.Bind(wx.EVT_BUTTON, self.btn_ok_paramOnButtonClick)
self.btn_display.Bind(wx.EVT_BUTTON, self.btn_displayOnButtonClick)
self.m_btn_query.Bind(wx.EVT_BUTTON,self.m_btn_queryOnButtonClick)
def __init__(self):
wx.Dialog.__init__(self,None,-1,u"异常频点定位数据请求",size=(450,400))
self.SetFont(wx.Font( 10,wx.ROMAN,wx.NORMAL,wx.LIGHT,underline=False,faceName=u"微软雅黑",encoding=wx.FONTENCODING_DEFAULT ))
###############################
self.tail=FrameTail(0,0,0xAA)
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
###############################################
panel=wx.Panel(self,-1)
self.CentreFreq=wx.TextCtrl(panel,-1,size=(80,25))
self.UploadNum=wx.TextCtrl(panel,-1,"1",size=(80,25))
self.radioBox=wx.RadioBox(panel,-1,choices=["POA","POA/TDOA"])
self.radioBox.SetSelection(0)
sampleList = ['5/5','2.5/2.5','1/1','0.5/0/5','0.1/0/1']
self.BandWidth = wx.ComboBox(panel, -1,'5/5',size=(80,30),choices=sampleList)
self.BandWidth.SetSelection(0)
self.StartTimeYear=wx.ComboBox(panel,-1,"2015",choices=["2015","2016","2017","2018"])
self.StartTimeMonth=wx.ComboBox(panel,-1,"12",choices=["1","2","3","4","5","6","7","8","9","10","11","12"])
self.StartTimeDay=wx.TextCtrl(panel,-1,"1",size=(60,25))
self.StartTimeHour=wx.TextCtrl(panel,-1,"0",size=(60,25))
self.StartTimeMinute=wx.TextCtrl(panel,-1,"0",size=(60,25))
self.StartTimeSecond=wx.TextCtrl(panel,-1,"0",size=(60,25))
self.StartTimeYear.SetSelection(0)
self.StartTimeMonth.SetSelection(11)
sizer=wx.BoxSizer(wx.VERTICAL)
sizer.Add((15,15))
sizer.Add(wx.StaticText(panel,-1,u"几何定位方法",size=(120,25)),0,wx.LEFT,20)
sizer.Add(self.radioBox,0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"中心频率(MHz)",size=(160,25)),0,wx.LEFT,20)
hBox1.Add(self.CentreFreq,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"带宽/数据率 (MHz/Msps):",size=(160,25)),0,wx.LEFT,20)
hBox1.Add(self.BandWidth,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"上传数据块个数(1-256):",size=(160,25)),0,wx.LEFT,20)
hBox1.Add(self.UploadNum,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
sizer.Add(wx.StaticText(panel,-1,u"采集起始时间(年-月-日-时-分-秒)："),0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear,0,wx.LEFT,20)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMonth,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeDay,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeHour,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMinute,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeSecond,0)
sizer.Add(hBox1)
sizer.Add((30,30))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok=wx.Button(panel,-1,"OK",size=(60,25))
hBox1.Add(self.btn_ok,0,wx.LEFT,20)
hBox1.Add(wx.Button(panel,wx.ID_CANCEL,"CANCEL",size=(60,25)),0,wx.LEFT,20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.Layout()
self.Centre( wx.BOTH )
#Events
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOk)
def __init__(self, parent):
wx.Dialog.__init__(self,
parent,
id=wx.ID_ANY,
title=u"压制发射",
pos=wx.DefaultPosition,
size=wx.Size(392, 382),
style=wx.DEFAULT_DIALOG_STYLE)
###########################################
self.T1 = 0
self.T2 = 0
self.T3 = 0
self.T4 = 0
self.press_mode = 5
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.tail = FrameTail(0, 0, 0xAA)
self.outPoint = staticVar.outPoint
#### show ######
self.parent = parent
self.show_recv_set = self.parent.show_recv_set
self.byte_to_package = self.parent.byte_to_package
###########################################
self.SetSizeHintsSz(wx.DefaultSize, wx.DefaultSize)
gSizer7 = wx.GridSizer(1, 1, 0, 0)
self.m_notebook2 = wx.Notebook(self, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_notebook2.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
self.m_panel7 = wx.Panel(self.m_notebook2, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer8 = wx.GridSizer(8, 2, 0, 0)
gSizer8.AddSpacer((0, 0), 1, wx.EXPAND, 5)
gSizer8.AddSpacer((0, 0), 1, wx.EXPAND, 5)
self.m_staticText3 = wx.StaticText(self.m_panel7, wx.ID_ANY, u"压制设置",
wx.DefaultPosition, wx.DefaultSize,
0)
self.m_staticText3.Wrap(-1)
gSizer8.Add(self.m_staticText3, 0, wx.ALL, 5)
m_press_setChoices = [u"结束压制", u"单频点自动", u"单频点手动", u"双频点自动", u"双频点手动"]
self.m_press_set = wx.Choice(self.m_panel7,
wx.ID_ANY, wx.DefaultPosition,
wx.Size(140, -1), m_press_setChoices, 0)
self.m_press_set.SetSelection(0)
gSizer8.Add(self.m_press_set, 0, wx.ALL, 5)
self.m_staticText4 = wx.StaticText(self.m_panel7, wx.ID_ANY, u"压制信号类型",
wx.DefaultPosition, wx.DefaultSize,
0)
self.m_staticText4.Wrap(-1)
gSizer8.Add(self.m_staticText4, 0, wx.ALL, 5)
m_press_signaltypeChoices = [
u"单频正弦波信号", u"等幅多频信号", u"噪声调频信号", u"数字射频储存DRM信号"
]
self.m_press_signaltype = wx.Choice(self.m_panel7,
wx.ID_ANY, wx.DefaultPosition,
wx.Size(140, -1),
m_press_signaltypeChoices, 0)
self.m_press_signaltype.SetSelection(0)
gSizer8.Add(self.m_press_signaltype, 0, wx.ALL, 5)
self.m_staticText5 = wx.StaticText(self.m_panel7, wx.ID_ANY, u"压制带宽",
wx.DefaultPosition, wx.DefaultSize,
0)
self.m_staticText5.Wrap(-1)
gSizer8.Add(self.m_staticText5, 0, wx.ALL, 5)
m_press_bwChoices = [u"单谱线（正弦波）", u"（等幅多边,噪声调频）", u"直接IQ调制发射（DRM）"]
self.m_press_bw = wx.Choice(self.m_panel7,
wx.ID_ANY, wx.DefaultPosition,
wx.Size(140, -1), m_press_bwChoices, 0)
self.m_press_bw.SetSelection(0)
gSizer8.Add(self.m_press_bw, 0, wx.ALL, 5)
self.m_staticText6 = wx.StaticText(self.m_panel7, wx.ID_ANY,
u"压制频率1（MHz）", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText6.Wrap(-1)
gSizer8.Add(self.m_staticText6, 0, wx.ALL, 5)
self.m_freq1 = wx.TextCtrl(self.m_panel7, wx.ID_ANY, wx.EmptyString,
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer8.Add(self.m_freq1, 0, wx.ALL, 5)
self.m_staticText7 = wx.StaticText(self.m_panel7, wx.ID_ANY,
u"压制频率2（MHz）", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText7.Wrap(-1)
gSizer8.Add(self.m_staticText7, 0, wx.ALL, 5)
self.m_freq2 = wx.TextCtrl(self.m_panel7, wx.ID_ANY, wx.EmptyString,
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer8.Add(self.m_freq2, 0, wx.ALL, 5)
self.btn_press_set = wx.Button(self.m_panel7, wx.ID_ANY, u"设置",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer8.Add(self.btn_press_set, 0, wx.ALL, 5)
self.btn_press_cancel = wx.Button(self.m_panel7, wx.ID_ANY, u"取消",
wx.DefaultPosition, wx.DefaultSize,
0)
gSizer8.Add(self.btn_press_cancel, 0, wx.ALL, 5)
self.m_panel7.SetSizer(gSizer8)
self.m_panel7.Layout()
gSizer8.Fit(self.m_panel7)
self.m_notebook2.AddPage(self.m_panel7, u"压制设置", False)
self.m_panel8 = wx.Panel(self.m_notebook2, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer4 = wx.GridSizer(6, 2, 0, 0)
gSizer4.AddSpacer((0, 0), 1, wx.EXPAND, 5)
gSizer4.AddSpacer((0, 0), 1, wx.EXPAND, 5)
self.m_staticText71 = wx.StaticText(self.m_panel8, wx.ID_ANY,
u"压制发射衰减（dB）", wx.DefaultPosition,
wx.DefaultSize, 0)
self.m_staticText71.Wrap(-1)
gSizer4.Add(self.m_staticText71, 0, wx.ALL, 5)
self.m_slider_weak = wx.Slider(
self.m_panel8, wx.ID_ANY, 0, 0, 89, wx.DefaultPosition,
wx.Size(150, -1), wx.SL_HORIZONTAL | wx.SL_LABELS | wx.SL_SELRANGE)
gSizer4.Add(self.m_slider_weak, 0, wx.ALL, 5)
self.btn_param_set = wx.Button(self.m_panel8, wx.ID_ANY, u"设置",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer4.Add(self.btn_param_set, 0, wx.ALL, 5)
self.m_button7 = wx.Button(self.m_panel8, wx.ID_ANY, u"取消",
wx.DefaultPosition, wx.DefaultSize, 0)
gSizer4.Add(self.m_button7, 0, wx.ALL, 5)
self.m_panel8.SetSizer(gSizer4)
self.m_panel8.Layout()
gSizer4.Fit(self.m_panel8)
self.m_notebook2.AddPage(self.m_panel8, u"参数设置", True)
self.m_panel9 = wx.Panel(self.m_notebook2, wx.ID_ANY,
wx.DefaultPosition, wx.DefaultSize,
wx.TAB_TRAVERSAL)
gSizer71 = wx.GridSizer(7, 1, 0, 0)
Choices = [u"压制发射衰减", u"压制中心频率", u"压制模式查询"]
self.radio_pressquery = wx.RadioBox(self.m_panel9, wx.ID_ANY, u"查询项",
wx.DefaultPosition,
wx.Size(120, 140), Choices, 1,
wx.RA_SPECIFY_COLS)
self.radio_pressquery.SetSelection(2)
gSizer71.Add(self.radio_pressquery, 0, wx.ALL, 5)
gSizer71.AddSpacer((0, 0), 1, wx.EXPAND, 5)
gSizer71.AddSpacer((0, 0), 1, wx.EXPAND, 5)
gSizer71.AddSpacer((0, 0), 1, wx.EXPAND, 5)
self.btn_press_query = wx.Button(self.m_panel9, wx.ID_ANY, u"查询",
wx.DefaultPosition, wx.DefaultSize, 0)
# gSizer71.Add( self.btn_press_query, 0, wx.ALL, 5 )
gSizer71.Add(self.btn_press_query, 0,
wx.ALIGN_BOTTOM | wx.ALIGN_CENTER, 5)
self.m_panel9.SetSizer(gSizer71)
self.m_panel9.Layout()
gSizer71.Fit(self.m_panel9)
self.m_notebook2.AddPage(self.m_panel9, u"查询", False)
gSizer7.Add(self.m_notebook2, 1, wx.EXPAND | wx.ALL, 5)
self.SetSizer(gSizer7)
self.Layout()
self.Centre(wx.BOTH)
# Connect Events
self.m_press_set.Bind(wx.EVT_CHOICE, self.m_press_setOnChoice)
self.btn_press_set.Bind(wx.EVT_BUTTON, self.btn_press_setOnChoice)
self.btn_param_set.Bind(wx.EVT_BUTTON, self.btn_param_setOnChoice)
self.btn_press_query.Bind(wx.EVT_BUTTON, self.btn_press_queryOnChoice)
def __init__(self,parent):
wx.Dialog.__init__(self,parent,-1,u"电磁分布态势数据请求",size=(400,500))
self.SetFont(wx.Font(10, wx.ROMAN, wx.NORMAL, wx.LIGHT, underline=False, faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
self.parent=parent
###############################
self.tail=FrameTail(0,0,0xAA)
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.List=staticVar.getCentreFreq()
self.ListFreq=staticVar.getFreq()
##############################
panel=wx.Panel(self,-1)
self.FreqSection=wx.ComboBox(panel,-1,u"FM调频广播频段",choices=self.List)
self.FreqSection.SetSelection(0)
self.radioChoose=wx.RadioButton(panel,-1,u"选择频率")
self.radioHand=wx.RadioButton(panel,-1,u"手动频率")
self.CentreFreq=wx.TextCtrl(panel,-1,size=(80,25))
self.BandWidth=wx.TextCtrl(panel,-1,size=(80,25))
self.Radius=wx.TextCtrl(panel,-1,size=(80,25))
self.FenBianLv=wx.TextCtrl(panel,-1,size=(80,25))
self.RefreshIntv=wx.TextCtrl(panel,-1,size=(80,25))
#############################################
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Min = int(curTime[10:12]) + 2
###############################################
self.StartTimeYear = wx.ComboBox(panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.StartTimeMonth = wx.ComboBox(panel, -1, str(Month),
choices=["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12"])
self.StartTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.StartTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.StartTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
self.EndTimeYear = wx.ComboBox(panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.EndTimeMonth = wx.ComboBox(panel, -1, str(Month),
choices=["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12"])
self.EndTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.EndTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.EndTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
sizer=wx.BoxSizer(wx.VERTICAL)
hBox=wx.BoxSizer(wx.HORIZONTAL)
sizer.Add((30,30))
hBox.Add(self.radioChoose,0,wx.LEFT,20)
hBox.Add(self.radioHand,0,wx.LEFT,20)
sizer.Add(hBox)
sizer.Add(self.FreqSection,0,wx.LEFT|wx.TOP,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"中心频率(MHz)",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.CentreFreq,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"带宽(MHz)",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.BandWidth,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"地理半径(km)",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.Radius,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"经纬度分辨率",size=(100,25)),0,wx.LEFT,20)
hBox1.Add(self.FenBianLv,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel,-1,u"动态刷新间隔(Min)",size=(130,25)),0,wx.LEFT,20)
hBox1.Add(self.RefreshIntv,0,wx.LEFT,20)
sizer.Add(hBox1)
sizer.Add(wx.StaticText(panel,-1,u"起始时间(年-月-日-时-分)：",size=(160,25)),0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear,0,wx.LEFT,20)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMonth,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeDay,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeHour,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.StartTimeMinute,0)
sizer.Add(hBox1)
sizer.Add(wx.StaticText(panel,-1,u"终止时间(年-月-日-时-分)：",size=(160,25)),0,wx.LEFT,20)
sizer.Add((10,10))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.EndTimeYear,0,wx.LEFT,20)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeMonth,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeDay,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeHour,0)
hBox1.Add(wx.StaticText(panel,-1,"-"),0,wx.LEFT|wx.RIGHT|wx.ALIGN_BOTTOM,5)
hBox1.Add(self.EndTimeMinute,0)
sizer.Add(hBox1)
sizer.Add((30,30))
hBox1=wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok=wx.Button(panel,-1,"OK",size=(60,25))
hBox1.Add(self.btn_ok,0,wx.LEFT,20)
hBox1.Add(wx.Button(panel,wx.ID_CANCEL,"CANCEL",size=(60,25)),0,wx.LEFT,20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.CentreFreq.Enable(True)
self.BandWidth.Enable(True)
self.radioHand.SetValue(True)
self.Layout()
self.Centre( wx.BOTH )
##Events
self.btn_ok.Bind(wx.EVT_BUTTON,self.OnbtnOK)
self.Bind(wx.EVT_RADIOBUTTON, self.OnRadio)
def QuerySend(self,funcPara):
query=Query()
query.CommonHeader=FrameHeader(0x55,funcPara,staticVar.getid()&0x00FF,staticVar.getid()>>8)
query.CommonTail=self.tail
staticVar.outPoint.write(bytearray(query))
def __init__(self):
wx.Dialog.__init__(self, None, -1, u"电磁分布态势数据请求", size=(400, 500))
self.SetFont(
wx.Font(10,
wx.ROMAN,
wx.NORMAL,
wx.LIGHT,
underline=False,
faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
###############################
self.tail = FrameTail(0, 0, 0xAA)
self.id = staticVar.getid()
self.lowid = self.id & 0x00FF
self.highid = self.id >> 8
self.List = staticVar.getCentreFreq()
self.ListFreq = staticVar.getFreq()
##############################
panel = wx.Panel(self, -1)
self.FreqSection = wx.ComboBox(panel,
-1,
u"FM调频广播频段",
choices=self.List)
self.FreqSection.SetSelection(0)
self.radioChoose = wx.RadioButton(panel, -1, u"选择频率")
self.radioHand = wx.RadioButton(panel, -1, u"手动频率")
self.CentreFreq = wx.TextCtrl(panel, -1, size=(80, 25))
self.BandWidth = wx.TextCtrl(panel, -1, size=(80, 25))
self.Radius = wx.TextCtrl(panel, -1, size=(80, 25))
self.FenBianLv = wx.TextCtrl(panel, -1, size=(80, 25))
self.RefreshIntv = wx.TextCtrl(panel, -1, size=(80, 25))
#############################################
curTime = time.strftime('%Y%m%d%H%M%S', time.localtime(time.time()))
Year = int(curTime[0:4])
Month = int(curTime[4:6])
Day = int(curTime[6:8])
Hour = int(curTime[8:10])
Min = int(curTime[10:12]) + 2
###############################################
self.StartTimeYear = wx.ComboBox(
panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.StartTimeMonth = wx.ComboBox(panel,
-1,
str(Month),
choices=[
"1", "2", "3", "4", "5", "6",
"7", "8", "9", "10", "11", "12"
])
self.StartTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.StartTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.StartTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
self.EndTimeYear = wx.ComboBox(
panel, -1, str(Year), choices=["2015", "2016", "2017", "2018"])
self.EndTimeMonth = wx.ComboBox(panel,
-1,
str(Month),
choices=[
"1", "2", "3", "4", "5", "6", "7",
"8", "9", "10", "11", "12"
])
self.EndTimeDay = wx.TextCtrl(panel, -1, str(Day), size=(60, 25))
self.EndTimeHour = wx.TextCtrl(panel, -1, str(Hour), size=(60, 25))
self.EndTimeMinute = wx.TextCtrl(panel, -1, str(Min), size=(60, 25))
sizer = wx.BoxSizer(wx.VERTICAL)
hBox = wx.BoxSizer(wx.HORIZONTAL)
sizer.Add((30, 30))
hBox.Add(self.radioChoose, 0, wx.LEFT, 20)
hBox.Add(self.radioHand, 0, wx.LEFT, 20)
sizer.Add(hBox)
sizer.Add(self.FreqSection, 0, wx.LEFT | wx.TOP, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"中心频率(MHz)", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.CentreFreq, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"带宽(MHz)", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.BandWidth, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"地理半径(km)", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.Radius, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"经纬度分辨率", size=(100, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.FenBianLv, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(wx.StaticText(panel, -1, u"动态刷新间隔(Min)", size=(130, 25)), 0,
wx.LEFT, 20)
hBox1.Add(self.RefreshIntv, 0, wx.LEFT, 20)
sizer.Add(hBox1)
sizer.Add(
wx.StaticText(panel, -1, u"起始时间(年-月-日-时-分)：", size=(160, 25)), 0,
wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.StartTimeYear, 0, wx.LEFT, 20)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMonth, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeDay, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeHour, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.StartTimeMinute, 0)
sizer.Add(hBox1)
sizer.Add(
wx.StaticText(panel, -1, u"终止时间(年-月-日-时-分)：", size=(160, 25)), 0,
wx.LEFT, 20)
sizer.Add((10, 10))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
hBox1.Add(self.EndTimeYear, 0, wx.LEFT, 20)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeMonth, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeDay, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeHour, 0)
hBox1.Add(wx.StaticText(panel, -1, "-"), 0,
wx.LEFT | wx.RIGHT | wx.ALIGN_BOTTOM, 5)
hBox1.Add(self.EndTimeMinute, 0)
sizer.Add(hBox1)
sizer.Add((30, 30))
hBox1 = wx.BoxSizer(wx.HORIZONTAL)
self.btn_ok = wx.Button(panel, -1, "OK", size=(60, 25))
hBox1.Add(self.btn_ok, 0, wx.LEFT, 20)
hBox1.Add(wx.Button(panel, wx.ID_CANCEL, "CANCEL", size=(60, 25)), 0,
wx.LEFT, 20)
sizer.Add(hBox1)
panel.SetSizer(sizer)
self.CentreFreq.Enable(True)
self.BandWidth.Enable(True)
self.radioHand.SetValue(True)
self.Layout()
self.Centre(wx.BOTH)
##Events
self.btn_ok.Bind(wx.EVT_BUTTON, self.OnbtnOK)
self.Bind(wx.EVT_RADIOBUTTON, self.OnRadio)
flag_sockFile = 1
self.sockFile=staticVar.sockFile
except Exception,e:
print e
if (flag_sock and flag_sockFile):
break
else:
count += 1
time.sleep(5)
if(count<1000):
connect = ConnectServer()
connect.CommonHeader = FrameHeader(0x55, 0xA1, staticVar.getid() & 0x00FF, staticVar.getid() >> 8)
connect.CommonTail = self.mainframe.tail
if (self.mainframe.GPS_list == []):
# 临时加的测试
self.GPS_list = [0] * 9
#############################
Lon = 114.4202
Lat = 30.5100
Alti = 35
Lon_fen = 0.4202 * 60
Lat_fen = 0.51 * 60
Lon_fen_I = int(Lon_fen)
Lon_fen_f = int((Lon_fen - int(Lon_fen)) * 1000)
Lat_fen_I = int(Lat_fen)
def __init__( self, parent ):
wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = u"定频接收", pos = wx.DefaultPosition, size = wx.Size( 387,392 ), style = wx.DEFAULT_DIALOG_STYLE )
##############################
self.id=staticVar.getid()
self.lowid=self.id&0x00FF
self.highid=self.id>>8
self.tail=FrameTail(0,0,0xAA)
self.outPoint=staticVar.outPoint
###############################
self.parent=parent
#### show #########
self.show_recv_set=self.parent.show_recv_set
self.byte_to_package=self.parent.byte_to_package
self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
gSizer1 = wx.GridSizer( 1, 1, 0, 0 )
self.m_notebook1 = wx.Notebook( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_notebook1.SetFont(wx.Font(10, wx.ROMAN, wx.NORMAL, wx.LIGHT, underline=False, faceName=u"微软雅黑",
encoding=wx.FONTENCODING_DEFAULT))
self.m_panel1 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer2 = wx.GridSizer( 9, 3, 0, 0 )
# gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
#
#
# gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
#
#
# gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_check_freq1 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第一个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq1, 0, wx.ALL, 5 )
self.m_text_freq1 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq1, 0, wx.ALL, 5 )
self.m_staticText6 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"MHz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText6.Wrap( -1 )
gSizer2.Add( self.m_staticText6, 0, wx.ALL, 5 )
self.m_check_freq2 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第二个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq2, 0, wx.ALL, 5 )
self.m_text_freq2 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq2, 0, wx.ALL, 5 )
self.m_staticText7 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"MHz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText7.Wrap( -1 )
gSizer2.Add( self.m_staticText7, 0, wx.ALL, 5 )
self.m_check_freq3 = wx.CheckBox( self.m_panel1, wx.ID_ANY, u"第三个中心频率", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_check_freq3, 0, wx.ALL, 5 )
self.m_text_freq3 = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_freq3, 0, wx.ALL, 5 )
self.m_staticText8 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"MHz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText8.Wrap( -1 )
gSizer2.Add( self.m_staticText8, 0, wx.ALL, 5 )
self.m_staticText11 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"IQ 带宽/数据率", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText11.Wrap( -1 )
gSizer2.Add( self.m_staticText11, 0, wx.ALL, 5 )
m_choice_bwChoices = [ u"5", u"2.5", u"1.25", u"0.625", u"0.125" ]
self.m_choice_bw = wx.Choice( self.m_panel1, wx.ID_ANY, wx.DefaultPosition, wx.Size( 110,-1 ), m_choice_bwChoices, 0 )
self.m_choice_bw.SetSelection( 0 )
gSizer2.Add( self.m_choice_bw, 0, wx.ALL, 5 )
self.m_staticText12 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"MHz", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText12.Wrap( -1 )
gSizer2.Add( self.m_staticText12, 0, wx.ALL, 5 )
self.m_staticText13 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"上传数据块个数", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText13.Wrap( -1 )
gSizer2.Add( self.m_staticText13, 0, wx.ALL, 5 )
self.m_text_up_num = wx.TextCtrl( self.m_panel1, wx.ID_ANY, u"1", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_up_num, 0, wx.ALL, 5 )
self.m_staticText14 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"(<=256)", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText14.Wrap( -1 )
gSizer2.Add( self.m_staticText14, 0, wx.ALL, 5 )
self.m_staticText15 = wx.StaticText( self.m_panel1, wx.ID_ANY, u" 延时时间", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText15.Wrap( -1 )
gSizer2.Add( self.m_staticText15, 0, wx.ALL, 5 )
self.m_text_dtime = wx.TextCtrl( self.m_panel1, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_text_dtime, 0, wx.ALL, 5 )
self.m_staticText16 = wx.StaticText( self.m_panel1, wx.ID_ANY, u"s", wx.DefaultPosition, wx.DefaultSize, 0 )
self.m_staticText16.Wrap( -1 )
gSizer2.Add( self.m_staticText16, 0, wx.ALL, 5 )
self.m_staticText19 = wx.StaticText(self.m_panel1, wx.ID_ANY, u"接收增益（dB）", wx.DefaultPosition, wx.DefaultSize,
0)
self.m_staticText19.Wrap(-1)
gSizer2.Add(self.m_staticText19, 0, wx.ALIGN_CENTER | wx.ALIGN_RIGHT | wx.ALIGN_TOP | wx.ALL, 5)
self.m_slider_gain = wx.Slider(self.m_panel1, wx.ID_ANY, 7, -1, 73, wx.Point(-1, -1), wx.Size(150, 20),
wx.SL_HORIZONTAL | wx.SL_LABELS | wx.SL_SELRANGE)
gSizer2.Add(self.m_slider_gain, 0, wx.ALIGN_CENTER | wx.ALL, 5)
gSizer2.AddSpacer((0, 0), 1, wx.EXPAND, 5)
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
gSizer2.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_btn_set = wx.Button( self.m_panel1, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_btn_set, 0, wx.ALL, 5 )
self.m_btn_cancel = wx.Button( self.m_panel1, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer2.Add( self.m_btn_cancel, 0, wx.ALL, 5 )
self.m_panel1.SetSizer( gSizer2 )
self.m_panel1.Layout()
gSizer2.Fit( self.m_panel1 )
self.m_notebook1.AddPage( self.m_panel1, u"定频接收参数", False )
# self.m_panel2 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.Size( 200,-1 ), wx.TAB_TRAVERSAL )
# gSizer4 = wx.GridSizer( 2, 2, 0, 0 )
#
# self.btn_ok_param = wx.Button( self.m_panel2, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer4.Add( self.btn_ok_param, 0, wx.ALIGN_CENTER|wx.ALL, 5 )
#
# self.btn_cancel_param = wx.Button( self.m_panel2, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer4.Add( self.btn_cancel_param, 0, wx.ALIGN_CENTER|wx.ALL, 5 )
# self.m_panel2.SetSizer( gSizer4 )
# self.m_panel2.Layout()
# self.m_notebook1.AddPage( self.m_panel2, u"参数设置", False )
# self.m_panel3 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
# gSizer5 = wx.GridSizer( 8, 2, 0, 0 )
#
# gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
# gSizer5.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
#
# self.m_check_wave = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"波形图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_wave, 0, wx.ALL, 5 )
#
#
#
# self.m_check_spec = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"功率谱", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_spec, 0, wx.ALL, 5 )
#
# self.m_check_water = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"瀑布图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_water, 0, wx.ALL, 5 )
#
# self.m_check_CCDF = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"CCDF", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_CCDF, 0, wx.ALL, 5 )
#
#
# self.m_check_eye = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"眼图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_eye, 0, wx.ALL, 5 )
#
# self.m_check_constel = wx.CheckBox( self.m_panel3, wx.ID_ANY, u"星座图", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.m_check_constel, 0, wx.ALL, 5 )
#
#
#
# self.btn_display = wx.Button( self.m_panel3, wx.ID_ANY, u"确定", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.btn_display, 0, wx.ALL, 5 )
#
# self.btn_display_cancel = wx.Button( self.m_panel3, wx.ID_ANY, u"取消", wx.DefaultPosition, wx.DefaultSize, 0 )
# gSizer5.Add( self.btn_display_cancel, 0, wx.ALL, 5 )
#
#
# self.m_panel3.SetSizer( gSizer5 )
# self.m_panel3.Layout()
# gSizer5.Fit( self.m_panel3 )
# self.m_notebook1.AddPage( self.m_panel3, u"窗口显示", False )
self.m_panel4 = wx.Panel( self.m_notebook1, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
gSizer6 = wx.GridSizer( 5, 1, 0, 0 )
gSizer6.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
m_radio_chooseChoices = [ u"定频中心频率", u"定频带宽",u"定频上传数据块个数" ]
self.m_radio_choose = wx.RadioBox( self.m_panel4, wx.ID_ANY, u"查询项", wx.DefaultPosition, wx.DefaultSize, m_radio_chooseChoices, 1, wx.RA_SPECIFY_COLS )
self.m_radio_choose.SetSelection( 0 )
gSizer6.Add( self.m_radio_choose, 0, wx.ALL, 5 )
gSizer6.AddSpacer( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_btn_query = wx.Button( self.m_panel4, wx.ID_ANY, u"查询", wx.DefaultPosition, wx.DefaultSize, 0 )
gSizer6.Add( self.m_btn_query, 0, wx.ALL, 5 )
self.m_panel4.SetSizer( gSizer6 )
self.m_panel4.Layout()
gSizer6.Fit( self.m_panel4 )
self.m_notebook1.AddPage( self.m_panel4, u"查询", True )
gSizer1.Add( self.m_notebook1, 1, wx.EXPAND |wx.ALL, 5 )
self.SetSizer( gSizer1 )
self.Layout()
self.Centre( wx.BOTH )
#Events
self.m_btn_set.Bind( wx.EVT_BUTTON, self.m_btn_setOnButtonClick )
# self.btn_ok_param.Bind(wx.EVT_BUTTON, self.btn_ok_paramOnButtonClick)
# self.btn_display.Bind(wx.EVT_BUTTON, self.btn_displayOnButtonClick)
self.m_btn_query.Bind(wx.EVT_BUTTON,self.m_btn_queryOnButtonClick)
