def setup_rbpf(linsystems, C, Q, R):
"""Setup each switch"""
N = len(linsystems)
models = numpy.array([None] * N)
for k in range(N):
models[k] = Model(linsystems[k].A, linsystems[k].B, linsystems[k].b, C,
Q, R)
A = SPF.calc_a(linsystems)
return models, A
return params.C2 @ x
F = [fun1, fun2]
G = [gs, gs]
numSwitches = 2
ydists = numpy.array([
scipy.stats.multivariate_normal(cov=params.R2),
scipy.stats.multivariate_normal(cov=params.R2)
])
xdists = numpy.array([
scipy.stats.multivariate_normal(cov=params.Q),
scipy.stats.multivariate_normal(cov=params.Q)
])
cstr_filter = SPF.Model(F, G, A, xdists, ydists)
nP = 500
xdist = scipy.stats.multivariate_normal(mean=init_state,
cov=params.init_state_covar)
sdist = [0.9, 0.1]
particles = SPF.init_spf(xdist, sdist, nP, 2)
switchtrack = numpy.zeros([2, params.N])
maxtrack = numpy.zeros([numSwitches, params.N])
smoothedtrack = numpy.zeros([numSwitches, params.N])
state_noise_dist = scipy.stats.multivariate_normal(cov=params.Q)
meas_noise_dist = scipy.stats.multivariate_normal(cov=params.R2)
params.xs[:, 0] = init_state
def fun():
isDone = True
init_state = numpy.array([0.55, 450]) # initial state
# Setup Switching Particle Filter
A = numpy.array([[0.999, 0.001], [0.001, 0.999]])
def fun1(x, u, w):
return params.cstr_model.run_reactor(x, u, params.h) + w
def fun2(x, u, w):
return params.cstr_model_broken.run_reactor(x, u, params.h) + w
def gs(x):
return params.C2 @ x
F = [fun1, fun2]
G = [gs, gs]
numSwitches = 2
ydists = numpy.array([
scipy.stats.multivariate_normal(cov=params.R2),
scipy.stats.multivariate_normal(cov=params.R2)
])
xdists = numpy.array([
scipy.stats.multivariate_normal(cov=params.Q),
scipy.stats.multivariate_normal(cov=params.Q)
])
cstr_filter = SPF.Model(F, G, A, xdists, ydists)
nP = 500 # number of particles
xdist = scipy.stats.multivariate_normal(mean=init_state,
cov=params.init_state_covar)
sdist = [0.9, 0.1]
particles = SPF.init_spf(xdist, sdist, nP, 2)
switchtrack = numpy.zeros([2, params.N])
maxtrack = numpy.zeros([numSwitches, params.N])
smoothedtrack = numpy.zeros([numSwitches, params.N])
state_noise_dist = scipy.stats.multivariate_normal(cov=params.Q)
meas_noise_dist = scipy.stats.multivariate_normal(cov=params.R2)
# Setup control (use linear control)
linsystems = params.cstr_model.get_nominal_linear_systems(params.h)
linsystems_broken = params.cstr_model_broken.get_nominal_linear_systems(
params.h)
opoint = 1 # the specific linear model we will use
lin_models = [None] * 2 # type: typing.List[RBPF.Model]
lin_models[0] = RBPF.Model(linsystems[opoint].A, linsystems[opoint].B,
linsystems[opoint].b, params.C2, params.Q,
params.R2)
lin_models[1] = RBPF.Model(linsystems_broken[opoint].A,
linsystems_broken[opoint].B,
linsystems_broken[opoint].b, params.C2,
params.Q, params.R2)
H = numpy.matrix([1, 0]) # only attempt to control the concentration
setpoint = 0.49
controllers = [None] * 2 # type: typing.List[LQR.Controller]
for k in range(2):
ysp = setpoint - lin_models[k].b[0] # set point is set here
x_off, u_off = LQR.offset(lin_models[k].A,
numpy.matrix(lin_models[k].B), params.C2, H,
numpy.matrix([ysp]))
K = LQR.lqr(lin_models[k].A, numpy.matrix(lin_models[k].B), params.QQ,
params.RR)
controllers[k] = LQR.Controller(K, x_off, u_off)
# Setup simulation
params.xs[:, 0] = init_state
params.ys2[:, 0] = params.C2 @ params.xs[:, 0] + meas_noise_dist.rvs(
) # measured from actual plant
SPF.init_filter(particles, params.ys2[:, 0], cstr_filter)
for k in range(numSwitches):
switchtrack[k, 0] = numpy.sum(
particles.w[numpy.where(particles.s == k)[0]])
maxtrack[:, 0] = SPF.get_max_track(particles, numSwitches)
smoothedtrack[:, 0] = RBPF.smoothed_track(numSwitches, switchtrack, 1, 10)
params.spfmeans[:, 0], params.spfcovars[:, :, 0] = SPF.get_stats(particles)
# Controller Input
ind = numpy.argmax(maxtrack[:, 0]) # use this model and controller
horizon = 150
params.us[0] = MPC.mpc_lqr(params.spfmeans[:, 0] - lin_models[ind].b,
horizon, lin_models[ind].A,
numpy.matrix(lin_models[ind].B), params.QQ,
params.RR, controllers[ind].x_off,
controllers[ind].u_off)
# Loop through the rest of time
for t in range(1, params.N):
random_element = state_noise_dist.rvs()
if params.ts[t] < 100: # break here
params.xs[:, t] = params.cstr_model.run_reactor(
params.xs[:, t - 1], params.us[t - 1],
params.h) + random_element
else:
params.xs[:, t] = params.cstr_model_broken.run_reactor(
params.xs[:, t - 1], params.us[t - 1], params.h)
params.xs[:, t] += random_element
params.ys2[:, t] = params.C2 @ params.xs[:, t] + meas_noise_dist.rvs(
) # measured from actual plant
SPF.spf_filter(particles, params.us[t - 1], params.ys2[:, t],
cstr_filter)
params.spfmeans[:, t], params.spfcovars[:, :,
t] = SPF.get_stats(particles)
for k in range(numSwitches):
switchtrack[k, 0] = numpy.sum(
particles.w[numpy.where(particles.s == k)[0]])
maxtrack[:, t] = SPF.get_max_track(particles, numSwitches)
smoothedtrack[:, t] = RBPF.smoothed_track(numSwitches, switchtrack, t,
40)
# Controller Input
if t % 1 == 0:
ind = numpy.argmax(maxtrack[:, t]) # use this model and controller
params.us[t] = MPC.mpc_lqr(
params.spfmeans[:, t] - lin_models[ind].b, horizon,
lin_models[ind].A, numpy.matrix(lin_models[ind].B), params.QQ,
params.RR, controllers[ind].x_off, controllers[ind].u_off)
else:
params.us[t] = params.us[t - 1]
if params.us[t] is None or numpy.isnan(params.us[t]):
isDone = False
break
return isDone, setpoint