def _setup():
common_setup(service='auth', config=config, setup_db=True, register_mq_exchanges=False,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False)
if cfg.CONF.auth.mode not in VALID_MODES:
raise ValueError('Valid modes are: %s' % (','.join(VALID_MODES)))
def _setup():
common_setup(service='garbagecollector',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_runners=False)
def setup_app(config=None):
config = config or {}
LOG.info("Creating st2api: %s as OpenAPI app.", VERSION_STRING)
is_gunicorn = config.get("is_gunicorn", False)
if is_gunicorn:
# NOTE: We only want to perform this logic in the WSGI worker
st2api_config.register_opts(ignore_errors=True)
capabilities = {
"name": "api",
"listen_host": cfg.CONF.api.host,
"listen_port": cfg.CONF.api.port,
"type": "active",
}
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(
service="api",
config=st2api_config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
service_registry=True,
capabilities=capabilities,
config_args=config.get("config_args", None),
)
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
router = Router(debug=cfg.CONF.api.debug,
auth=cfg.CONF.auth.enable,
is_gunicorn=is_gunicorn)
spec = spec_loader.load_spec("st2common", "openapi.yaml.j2")
transforms = {
"^/api/v1/$": ["/v1"],
"^/api/v1/": ["/", "/v1/"],
"^/api/v1/executions": ["/actionexecutions", "/v1/actionexecutions"],
"^/api/exp/": ["/exp/"],
}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = StreamingMiddleware(app, path_whitelist=["/v1/executions/*/output*"])
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = ResponseInstrumentationMiddleware(app, router, service_name="api")
app = RequestIDMiddleware(app)
app = RequestInstrumentationMiddleware(app, router, service_name="api")
return app
def _setup():
common_setup(service='actionrunner',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True)
_setup_sigterm_handler()
def _setup():
common_setup(service='api',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True)
def setup_app(config=None):
LOG.info('Creating st2auth: %s as Pecan app.', VERSION_STRING)
is_gunicorn = getattr(config, 'is_gunicorn', False)
if is_gunicorn:
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
st2auth_config.register_opts()
common_setup(service='auth', config=st2auth_config, setup_db=True,
register_mq_exchanges=False,
register_signal_handlers=True,
register_internal_trigger_types=False,
run_migrations=False,
config_args=config.config_args)
if not config:
# standalone HTTP server case
config = _get_pecan_config()
else:
# gunicorn case
if is_gunicorn:
config.app = _get_pecan_config().app
app_conf = dict(config.app)
app = pecan.make_app(
app_conf.pop('root'),
logging=getattr(config, 'logging', {}),
hooks=[hooks.JSONErrorResponseHook(), hooks.CorsHook()],
**app_conf
)
LOG.info('%s app created.' % __name__)
return app
def _setup():
capabilities = {
'name': 'timerengine',
'type': 'passive'
}
common_setup(service='timer_engine', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, service_registry=True, capabilities=capabilities)
def _setup():
capabilities = {
'name': 'notifier',
'type': 'passive'
}
common_setup(service='notifier', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, service_registry=True, capabilities=capabilities)
def setup_app(config={}):
LOG.info('Creating st2api: %s as OpenAPI app.', VERSION_STRING)
is_gunicorn = config.get('is_gunicorn', False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
st2api_config.register_opts()
capabilities = {
'name': 'api',
'listen_host': cfg.CONF.api.host,
'listen_port': cfg.CONF.api.port,
'type': 'active'
}
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(service='api',
config=st2api_config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
service_registry=True,
capabilities=capabilities,
config_args=config.get('config_args', None))
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
router = Router(debug=cfg.CONF.api.debug,
auth=cfg.CONF.auth.enable,
is_gunicorn=is_gunicorn)
spec = spec_loader.load_spec('st2common', 'openapi.yaml.j2')
transforms = {
'^/api/v1/$': ['/v1'],
'^/api/v1/': ['/', '/v1/'],
'^/api/v1/executions': ['/actionexecutions', '/v1/actionexecutions'],
'^/api/exp/': ['/exp/']
}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = StreamingMiddleware(app, path_whitelist=['/v1/executions/*/output*'])
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = ResponseInstrumentationMiddleware(app, router, service_name='api')
app = RequestIDMiddleware(app)
app = RequestInstrumentationMiddleware(app, router, service_name='api')
return app
def _setup():
common_setup(service='auth', config=config, setup_db=True, register_mq_exchanges=False,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False)
# Additional pre-run time checks
validate_auth_backend_is_correctly_configured()
def _setup():
common_setup(service='sensorcontainer',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_runners=False)
def main():
cfg.CONF.set_override("debug", True)
common_setup(
service="test",
config=config,
setup_db=False,
run_migrations=False,
register_runners=False,
register_internal_trigger_types=False,
register_mq_exchanges=False,
register_signal_handlers=False,
service_registry=False,
config_args=["--config-file", ST2_CONFIG_DEBUG_LL_PATH],
)
LOG.info("Test info message 1")
LOG.debug("Test debug message 1")
# 1. Actual unicode sequence
LOG.info("Test info message with unicode 1 - 好好好")
LOG.debug("Test debug message with unicode 1 - 好好好")
# 2. Ascii escape sequence
LOG.info("Test info message with unicode 1 - " + "好好好".encode(
"ascii", "backslashreplace").decode("ascii", "backslashreplace"))
LOG.debug("Test debug message with unicode 1 - " + "好好好".encode(
"ascii", "backslashreplace").decode("ascii", "backslashreplace"))
def _setup():
common_setup(service='auth', config=config, setup_db=True, register_mq_exchanges=False,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False)
if cfg.CONF.auth.mode not in VALID_MODES:
raise ValueError('Valid modes are: %s' % (','.join(VALID_MODES)))
def setup():
common_setup(service='workflow_engine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True)
setup_sigterm_handler()
def _setup():
common_setup(
service="exporter",
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
)
def _setup():
common_setup(service='rulesengine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
register_runners=False)
def _setup():
common_setup(service='stream',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=False,
run_migrations=False)
def _setup():
capabilities = {
'name': 'rulesengine',
'type': 'passive'
}
common_setup(service='rulesengine', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=True,
register_runners=False, service_registry=True, capabilities=capabilities)
def _setup():
capabilities = {
'name': 'sensorcontainer',
'type': 'passive'
}
common_setup(service='sensorcontainer', config=config, setup_db=True,
register_mq_exchanges=True, register_signal_handlers=True,
register_runners=False, service_registry=True, capabilities=capabilities)
def _setup():
common_setup(
service='api',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True)
def _setup():
capabilities = {
'name': 'actionrunner',
'type': 'passive'
}
common_setup(service='actionrunner', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, service_registry=True, capabilities=capabilities)
_setup_sigterm_handler()
def setup_app(config=None):
config = config or {}
LOG.info("Creating st2auth: %s as OpenAPI app.", VERSION_STRING)
is_gunicorn = config.get("is_gunicorn", False)
if is_gunicorn:
# NOTE: We only want to perform this logic in the WSGI worker
st2auth_config.register_opts(ignore_errors=True)
capabilities = {
"name": "auth",
"listen_host": cfg.CONF.auth.host,
"listen_port": cfg.CONF.auth.port,
"listen_ssl": cfg.CONF.auth.use_ssl,
"type": "active",
}
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(
service="auth",
config=st2auth_config,
setup_db=True,
register_mq_exchanges=False,
register_signal_handlers=True,
register_internal_trigger_types=False,
run_migrations=False,
service_registry=True,
capabilities=capabilities,
config_args=config.get("config_args", None),
)
# pysaml2 uses subprocess communicate which calls communicate_with_poll
if cfg.CONF.auth.sso and cfg.CONF.auth.sso_backend == "saml2":
use_select_poll_workaround(nose_only=False)
# Additional pre-run time checks
validate_auth_backend_is_correctly_configured()
router = Router(debug=cfg.CONF.auth.debug, is_gunicorn=is_gunicorn)
spec = spec_loader.load_spec("st2common", "openapi.yaml.j2")
transforms = {"^/auth/v1/": ["/", "/v1/"]}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = ResponseInstrumentationMiddleware(app, router, service_name="auth")
app = RequestIDMiddleware(app)
app = RequestInstrumentationMiddleware(app, router, service_name="auth")
return app
def _setup():
capabilities = {
'name': 'garbagecollector',
'type': 'passive'
}
common_setup(service='garbagecollector', config=config, setup_db=True,
register_mq_exchanges=True, register_signal_handlers=True,
register_runners=False, service_registry=True,
capabilities=capabilities)
def setup_app(config={}):
LOG.info('Creating st2api: %s as OpenAPI app.', VERSION_STRING)
is_gunicorn = config.get('is_gunicorn', False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
st2api_config.register_opts()
capabilities = {
'name': 'api',
'listen_host': cfg.CONF.api.host,
'listen_port': cfg.CONF.api.port,
'type': 'active'
}
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(service='api', config=st2api_config, setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
service_registry=True,
capabilities=capabilities,
config_args=config.get('config_args', None))
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
router = Router(debug=cfg.CONF.api.debug, auth=cfg.CONF.auth.enable,
is_gunicorn=is_gunicorn)
spec = spec_loader.load_spec('st2common', 'openapi.yaml.j2')
transforms = {
'^/api/v1/$': ['/v1'],
'^/api/v1/': ['/', '/v1/'],
'^/api/v1/executions': ['/actionexecutions', '/v1/actionexecutions'],
'^/api/exp/': ['/exp/']
}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = StreamingMiddleware(app, path_whitelist=['/v1/executions/*/output*'])
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = ResponseInstrumentationMiddleware(app, router, service_name='api')
app = RequestIDMiddleware(app)
app = RequestInstrumentationMiddleware(app, router, service_name='api')
return app
def setup():
common_setup(
service='workflow_engine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True
)
setup_sigterm_handler()
def _setup():
capabilities = {
'name': 'stream',
'listen_host': cfg.CONF.stream.host,
'listen_port': cfg.CONF.stream.port,
'type': 'active'
}
common_setup(service='stream', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False, service_registry=True, capabilities=capabilities)
def _setup():
common_setup(service='api',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True)
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
def _setup():
capabilities = {
'name': 'stream',
'listen_host': cfg.CONF.stream.host,
'listen_port': cfg.CONF.stream.port,
'type': 'active'
}
common_setup(service='stream', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False, service_registry=True, capabilities=capabilities)
def _setup():
capabilities = {"name": "timerengine", "type": "passive"}
common_setup(
service="timer_engine",
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities,
)
def _setup():
capabilities = {"name": "notifier", "type": "passive"}
common_setup(
service=NOTIFIER,
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities,
)
def _setup():
capabilities = {'name': 'rulesengine', 'type': 'passive'}
common_setup(service='rulesengine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
register_runners=False,
service_registry=True,
capabilities=capabilities)
def setup():
capabilities = {"name": "workflowengine", "type": "passive"}
common_setup(
service=WORKFLOW_ENGINE,
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities,
)
def _setup():
capabilities = {"name": "actionrunner", "type": "passive"}
common_setup(
service=ACTIONRUNNER,
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities,
)
def setup_app(config=None):
LOG.info('Creating st2api: %s as Pecan app.', VERSION_STRING)
is_gunicorn = getattr(config, 'is_gunicorn', False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
st2api_config.register_opts()
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(service='api',
config=st2api_config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
config_args=config.config_args)
if not config:
# standalone HTTP server case
config = _get_pecan_config()
else:
# gunicorn case
if is_gunicorn:
config.app = _get_pecan_config().app
app_conf = dict(config.app)
active_hooks = [
hooks.RequestIDHook(),
hooks.JSONErrorResponseHook(),
hooks.LoggingHook()
]
active_hooks.append(hooks.AuthHook())
active_hooks.append(hooks.CorsHook())
app = pecan.make_app(app_conf.pop('root'),
logging=getattr(config, 'logging', {}),
hooks=active_hooks,
**app_conf)
# Static middleware which servers common static assets such as logos
static_root = os.path.join(BASE_DIR, 'public')
app = StaticFileMiddleware(app=app, directory=static_root)
LOG.info('%s app created.' % __name__)
return app
def setup():
capabilities = {'name': 'workflowengine', 'type': 'passive'}
common_setup(service='workflow_engine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities)
setup_sigterm_handler()
def setup_app(config={}):
LOG.info("Creating st2stream: %s as OpenAPI app.", VERSION_STRING)
is_gunicorn = config.get("is_gunicorn", False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
st2stream_config.register_opts()
capabilities = {
"name": "stream",
"listen_host": cfg.CONF.stream.host,
"listen_port": cfg.CONF.stream.port,
"type": "active",
}
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(
service="stream",
config=st2stream_config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=False,
run_migrations=False,
service_registry=True,
capabilities=capabilities,
config_args=config.get("config_args", None),
)
router = Router(debug=cfg.CONF.stream.debug,
auth=cfg.CONF.auth.enable,
is_gunicorn=is_gunicorn)
spec = spec_loader.load_spec("st2common", "openapi.yaml.j2")
transforms = {"^/stream/v1/": ["/", "/v1/"]}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = StreamingMiddleware(app)
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = ResponseInstrumentationMiddleware(app, router, service_name="stream")
app = RequestIDMiddleware(app)
app = RequestInstrumentationMiddleware(app, router, service_name="stream")
return app
def _setup():
capabilities = {"name": "sensorcontainer", "type": "passive"}
common_setup(
service="sensorcontainer",
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_runners=False,
service_registry=True,
capabilities=capabilities,
)
def _setup():
capabilities = {"name": "garbagecollector", "type": "passive"}
common_setup(
service=GARBAGE_COLLECTOR,
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_runners=False,
service_registry=True,
capabilities=capabilities,
)
def setup_app(config=None):
LOG.info('Creating st2api: %s as Pecan app.', VERSION_STRING)
is_gunicorn = getattr(config, 'is_gunicorn', False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
st2api_config.register_opts()
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(service='api', config=st2api_config, setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
config_args=config.config_args)
if not config:
# standalone HTTP server case
config = _get_pecan_config()
else:
# gunicorn case
if is_gunicorn:
config.app = _get_pecan_config().app
app_conf = dict(config.app)
active_hooks = [hooks.RequestIDHook(), hooks.JSONErrorResponseHook(),
hooks.LoggingHook()]
if cfg.CONF.auth.enable:
active_hooks.append(hooks.AuthHook())
active_hooks.append(hooks.CorsHook())
app = pecan.make_app(app_conf.pop('root'),
logging=getattr(config, 'logging', {}),
hooks=active_hooks,
**app_conf
)
# Static middleware which servers common static assets such as logos
static_root = os.path.join(BASE_DIR, 'public')
app = StaticFileMiddleware(app=app, directory=static_root)
LOG.info('%s app created.' % __name__)
return app
def _setup():
capabilities = {"name": "scheduler", "type": "passive"}
common_setup(
service=SCHEDULER,
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities,
)
_setup_sigterm_handler()
def _setup():
capabilities = {
'name': 'auth',
'listen_host': cfg.CONF.auth.host,
'listen_port': cfg.CONF.auth.port,
'listen_ssl': cfg.CONF.auth.use_ssl,
'type': 'active'
}
common_setup(service='auth', config=config, setup_db=True, register_mq_exchanges=False,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False, service_registry=True, capabilities=capabilities)
# Additional pre-run time checks
validate_auth_backend_is_correctly_configured()
def _setup():
capabilities = {
'name': 'api',
'listen_host': cfg.CONF.api.host,
'listen_port': cfg.CONF.api.port,
'type': 'active'
}
common_setup(service='api', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=True,
service_registry=True, capabilities=capabilities)
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
def setup():
capabilities = {
'name': 'workflowengine',
'type': 'passive'
}
common_setup(
service='workflow_engine',
config=config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
service_registry=True,
capabilities=capabilities
)
setup_sigterm_handler()
def setup_app(config=None):
LOG.info("Creating st2api: %s as Pecan app.", VERSION_STRING)
is_gunicorn = getattr(config, "is_gunicorn", False)
if is_gunicorn:
st2api_config.register_opts()
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
common_setup(
service="api",
config=st2api_config,
setup_db=True,
register_mq_exchanges=True,
register_signal_handlers=True,
register_internal_trigger_types=True,
run_migrations=True,
config_args=config.config_args,
)
if not config:
# standalone HTTP server case
config = _get_pecan_config()
else:
# gunicorn case
if is_gunicorn:
config.app = _get_pecan_config().app
app_conf = dict(config.app)
active_hooks = [hooks.RequestIDHook(), hooks.JSONErrorResponseHook(), hooks.LoggingHook()]
if cfg.CONF.auth.enable:
active_hooks.append(hooks.AuthHook())
active_hooks.append(hooks.CorsHook())
app = pecan.make_app(app_conf.pop("root"), logging=getattr(config, "logging", {}), hooks=active_hooks, **app_conf)
# Static middleware which servers common static assets such as logos
static_root = os.path.join(BASE_DIR, "public")
app = StaticFileMiddleware(app=app, directory=static_root)
LOG.info("%s app created." % __name__)
return app
def setup_app(config={}):
LOG.info('Creating st2auth: %s as OpenAPI app.', VERSION_STRING)
is_gunicorn = config.get('is_gunicorn', False)
if is_gunicorn:
# Note: We need to perform monkey patching in the worker. If we do it in
# the master process (gunicorn_config.py), it breaks tons of things
# including shutdown
monkey_patch()
# This should be called in gunicorn case because we only want
# workers to connect to db, rabbbitmq etc. In standalone HTTP
# server case, this setup would have already occurred.
st2auth_config.register_opts()
common_setup(service='auth', config=st2auth_config, setup_db=True,
register_mq_exchanges=False,
register_signal_handlers=True,
register_internal_trigger_types=False,
run_migrations=False,
config_args=config.get('config_args', None))
# Additional pre-run time checks
validate_auth_backend_is_correctly_configured()
router = Router(debug=cfg.CONF.auth.debug)
spec = spec_loader.load_spec('st2common', 'openapi.yaml.j2')
transforms = {
'^/auth/v1/': ['/', '/v1/']
}
router.add_spec(spec, transforms=transforms)
app = router.as_wsgi
# Order is important. Check middleware for detailed explanation.
app = ErrorHandlingMiddleware(app)
app = CorsMiddleware(app)
app = LoggingMiddleware(app, router)
app = RequestIDMiddleware(app)
return app
def _setup():
common_setup(service='garbagecollector', config=config, setup_db=True,
register_mq_exchanges=True, register_signal_handlers=True)
def _setup():
common_setup(service='api', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=True)
# Additional pre-run time checks
validate_rbac_is_correctly_configured()
def _setup():
common_setup(service='stream', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True, register_internal_trigger_types=False,
run_migrations=False)
def _setup():
common_setup(service='resultstracker', config=config, setup_db=True,
register_mq_exchanges=True, register_signal_handlers=True)
from oslo_config import cfg
from st2api import config # noqa
from st2common.service_setup import setup as common_setup
__all__ = [
'server',
'app'
]
DEFAULT_ST2_CONFIG_PATH = '/etc/st2/st2.conf'
ST2_CONFIG_PATH = os.environ.get('ST2_CONFIG_PATH', DEFAULT_ST2_CONFIG_PATH)
CONFIG_ARGS = ['--config-file', ST2_CONFIG_PATH]
common_setup(service='api', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=False, register_internal_trigger_types=True,
config_args=CONFIG_ARGS)
server = {
'host': cfg.CONF.api.host,
'port': cfg.CONF.api.port
}
app = {
'root': 'st2api.controllers.root.RootController',
'modules': ['st2api'],
'debug': cfg.CONF.api_pecan.debug,
'errors': {'__force_dict__': True}
}
def _setup():
common_setup(service='rulesengine', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True)
def _setup():
common_setup(service='sensorcontainer', config=config, setup_db=True,
register_mq_exchanges=True, register_signal_handlers=True)
def _setup():
common_setup(service='actionrunner', config=config, setup_db=True, register_mq_exchanges=True,
register_signal_handlers=True)
_setup_sigterm_handler()