def test_001_check_wifi_upload(self):
"""判断WIFI总上行是否正确"""
#首先启用无线网卡
tmp2 = WirelessSettingsBusiness(self.driver)
tmp2.wlan_enable(data_basic['wlan_pc'])
#刷新页面重新登录ap页面
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
#把AP恢复出厂配置
tmp1 = ConfigUpdateBusiness(self.driver)
tmp1.restore_AP_factory()
#重新登录AP
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#调用实例的登录AP的web界面
Lg.login(data_basic['superUser'], data_basic['super_defalut_pwd'])
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#修改无线的ssid,加密方式和密码
tmp2.change_wifi_ssid_encryption_pwd(data_wirless['all_ssid'], "psk2",
data_wirless['short_wpa'])
#判断WIFI总上行是否正确
tmp = StateInfoBusiness(self.driver)
result = tmp.check_wifi_upload(data_wirless['all_ssid'],
data_wirless['short_wpa'],
data_basic['wlan_pc'],
data_basic['lan_pc'])
self.assertTrue(result)
log.debug("001\t\tpass")
def test_007_check_AP_firmware_version(self):
"""判断固件版本是否正确"""
tmp = StateInfoBusiness(self.driver)
#获取固件版本
result = tmp.obtain_AP_firmware_version()
self.assertEqual(result, data_basic['new_version'])
log.debug("007\t\tpass")
def test_002_set_wan_staticIP(self):
"""外网设置为静态IP，能否上网"""
tmp = WanSettingsBusiness(self.driver)
#设置外网为staticIP
tmp.change_wan_to_staticIP(data_wan['static_IP'], data_wan['netmask'],
data_wan['gateway'], data_wan['DNS'])
#判断ap能够上网
time.sleep(30)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
result4 = tmp.get_ping("www.baidu.com")
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_wan['static_IP'], result3)
self.assertEqual(0, result4)
log.debug("002\t\tpass")
def test_003_set_wan_dhcp(self):
"""外网设置为动态获取，能否上网"""
tmp = WanSettingsBusiness(self.driver)
#设置外网为动态获取
tmp.change_wan_to_dhcp()
time.sleep(30)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ap能够上网
result4 = tmp.get_ping("www.baidu.com")
tmp.disconnect_ap()
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "动态获取")
self.assertIn(data_wan['wan_str'], result3)
self.assertEqual(0, result4)
log.debug("003\t\tpass")
def test_002_check_routemode_config_file_after_reboot_ap(self):
"""验证路由模式下重启后配置文件没有丢失"""
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#判断wan口是否是静态IP
tmp3 = WanSettingsBusiness(self.driver)
result5 = tmp3.get_wan_way(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_wan['static_IP'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("static", result5)
log.debug("002\t\tpass")
def test_003_check_AP_current_mode_routemode(self):
"""判断当前模式是否正确--路由模式"""
tmp = StateInfoBusiness(self.driver)
#获取当前模式
result = tmp.obtain_AP_current_mode()
self.assertEqual(result, "路由模式")
log.debug("003\t\tpass")
def test_008_check_bridgemode_config_file_after_reboot_ap(self):
"""验证桥接模式下重启后配置文件没有丢失"""
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
self.assertEqual(result1, "网桥模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("wds", result5)
log.debug("008\t\tpass")
def test_005_check_apmode_config_file_after_reboot_ap(self):
"""验证AP模式下重启后配置文件没有丢失"""
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取内网IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
self.assertEqual(result1, "AP模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_basic['DUT_ip'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("ap", result5)
log.debug("005\t\tpass")
def test_006_check_AP_equipment_model(self):
"""判断设备型号是否正确"""
tmp = StateInfoBusiness(self.driver)
#获取设备型号
result = tmp.obtain_AP_equipment_model()
AP_model = "IAP2312N-2T"
self.assertEqual(result, AP_model)
log.debug("006\t\tpass")
def test_008_check_AP_24g_ssid(self):
"""判断2.4G的ssid是否正确"""
tmp = StateInfoBusiness(self.driver)
#获取2.4G的ssid
result = tmp.obtain_AP_24g_ssid()
tmp.disconnect_ap()
self.assertEqual(result, data_wirless['all_ssid'])
log.debug("008\t\tpass")
def test_005_check_AP_MAC_address(self):
"""判断AP的mac地址是否正确"""
tmp = StateInfoBusiness(self.driver)
#判断AP的mac地址是否正确
result = tmp.check_AP_MAC_address(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
self.assertTrue(result)
log.debug("005\t\tpass")
def test_004_check_AP_wireless_client(self):
"""判断无线用户数是否正确"""
#判断无线用户数是否正确
tmp = StateInfoBusiness(self.driver)
result = tmp.check_AP_wireless_client(data_wirless['all_ssid'],
data_basic['wlan_pc'], "wpa",
data_wirless['short_wpa'])
self.assertEqual(result, 1)
log.debug("004\t\tpass")
def test_002_check_wifi_download(self):
"""判断WIFI总下行是否正确"""
#判断WIFI总上行是否正确
tmp = StateInfoBusiness(self.driver)
result = tmp.check_wifi_download(data_wirless['all_ssid'],
data_wirless['short_wpa'],
data_basic['wlan_pc'],
data_basic['lan_pc'])
self.assertTrue(result)
log.debug("002\t\tpass")
def test_010_clientmode_system_upgrade_check_config(self):
"""客户端模式下，系统升级，检查配置"""
tmp = SystemUpgradeBusiness(self.driver)
#选择固件路径，升级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['new_version'] + '.bin')
print(PATH)
tmp.upgrade_system(PATH)
#设置PC的静态IP,能够访问DUT的webpage
tmp.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['new_version'])
#修改工作模式为路由模式,外网设置dhcp模式
tmp4.change_workmode_to_route_WANdhcp(data_wirless['all_ssid'], "psk2",
data_wirless['short_wpa'],
"HT40", "auto")
#client重新获取ip
tmp.dhcp_release_wlan(data_basic['lan_pc'])
tmp.dhcp_wlan(data_basic['lan_pc'])
tmp.disconnect_ap()
#删除下载固件
os.unlink(PATH)
self.assertEqual(result1, "客户端模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn("wds_c", result5)
self.assertTrue(result6)
log.debug("010\t\tpass")
def test_011_bridgemode_upload_config_file(self):
"""桥接模式下验证上传配置文件"""
tmp = ConfigUpdateBusiness(self.driver)
#文件路径
PATH = os.path.join(os.getcwd(), "bakup.file")
print(PATH)
#上传配置文件
tmp.upload_config_file(PATH)
#设置PC的静态IP,能够访问DUT的webpage
tmp.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#测试完成后删除备份文件
if result1 != "网桥模式":
#如果恢复配置失败，保存配置文件
dirname = os.path.dirname(os.path.dirname(__file__))
current_time = time.strftime('%m%d%H%M',time.localtime(time.time()))
backfile_PATH = os.path.join(dirname, "data", "testresultdata", "bridgemode_{}_bakup.file".format(current_time))
shutil.copy(PATH, backfile_PATH)
os.unlink(PATH)
self.assertEqual(result1, "网桥模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("wds", result5)
log.debug("011\t\tpass")
def test_008_bridgemode_system_upgrade_check_config(self):
"""桥接模式下，系统升级，检查配置"""
tmp = SystemUpgradeBusiness(self.driver)
#选择固件路径，升级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['new_version'] + '.bin')
print(PATH)
tmp.upgrade_system(PATH)
#设置PC的静态IP,能够访问DUT的webpage
tmp.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['new_version'])
self.assertEqual(result1, "网桥模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("wds", result5)
self.assertTrue(result6)
log.debug("008\t\tpass")
def test_003_routemode_upload_config_file(self):
"""路由模式下验证上传配置文件"""
tmp = ConfigUpdateBusiness(self.driver)
#文件路径
PATH = os.path.join(os.getcwd(), "bakup.file")
print(PATH)
#上传配置文件
tmp.upload_config_file(PATH)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#判断wan口是否是静态IP
tmp3 = WanSettingsBusiness(self.driver)
result5 = tmp3.get_wan_way(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#测试完成后删除备份文件
if result2 != "静态IP":
#如果恢复配置失败，保存配置文件
dirname = os.path.dirname(os.path.dirname(__file__))
current_time = time.strftime('%m%d%H%M',time.localtime(time.time()))
backfile_PATH = os.path.join(dirname, "data", "testresultdata", "routemode_{}_bakup.file".format(current_time))
shutil.copy(PATH, backfile_PATH)
os.unlink(PATH)
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_wan['static_IP'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("static", result5)
log.debug("003\t\tpass")
def test_005_apmode_system_downgrade_check_config(self):
"""ap模式下，修改配置后，系统降级，检查配置"""
tmp1 = WorkModeBusiness(self.driver)
#设置PC的静态IP,能够访问DUT的webpage
tmp1.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#修改工作模式为AP模式,内网设置静态IP
tmp1.change_workmode_to_ap_LANstaticIP(data_basic['DUT_ip'],
data_lan['netmask1'],
data_wirless['all_ssid'],
"psk2",
data_wirless['short_wpa'],
"HT20")
time.sleep(30)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#选择固件路径，降级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['old_version'] + '.bin')
print(PATH)
tmp = SystemUpgradeBusiness(self.driver)
tmp.upgrade_system(PATH)
#设置PC的静态IP,能够访问DUT的webpage
tmp.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取内网IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['old_version'])
self.assertEqual(result1, "AP模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_basic['DUT_ip'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("ap", result5)
self.assertTrue(result6)
log.debug("005\t\tpass")
def test_009_clientmode_system_downgrade_check_config(self):
"""客户端模式下，修改配置后，系统降级，检查配置"""
tmp1 = WorkModeBusiness(self.driver)
#修改工作模式为client模式,内网设置静态IP,桥接ap无线加密为wpa2
tmp1.change_workmode_to_client_LANstaticIP(
data_basic['DUT_ip'], data_lan['netmask1'],
data_wirless['bridge_essid'], data_wirless['bridge_encryption'],
data_wirless['bridge_bssid'], data_wirless['bridge_pwd'],
data_basic['ssh_user'], data_basic['ssh_pwd'])
time.sleep(30)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#选择固件路径，降级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['old_version'] + '.bin')
print(PATH)
tmp = SystemUpgradeBusiness(self.driver)
tmp.upgrade_system(PATH)
#设置PC的静态IP,能够访问DUT的webpage
tmp.set_eth_ip(data_basic['lan_pc'], data_basic['static_PC_ip'])
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['old_version'])
#删除下载固件
os.unlink(PATH)
self.assertEqual(result1, "客户端模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn("wds_c", result5)
self.assertTrue(result6)
log.debug("009\t\tpass")
def test_011_check_clientmode_config_file_after_reboot_ap(self):
"""验证客户端模式下重启后配置文件没有丢失"""
#关闭AP的eth1端口，以免她来分配ip地址，和桥接的dhcp server相冲突
tmp4 = WorkModeBusiness(self.driver)
tmp4.down_ap_eth1(data_basic['DUT_ip'], data_basic['ssh_user'],
data_basic['ssh_pwd'])
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取桥接的连接状态
result2 = tmp1.obtain_WAN_IP_generation()
#获取信号强度
result3 = tmp1.obtain_WAN_IP_address()
#登录ap后台，判断ap的工作模式
tmp3 = WorkModeBusiness(self.driver)
result5 = tmp3.check_DUT_workmode(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
self.assertEqual(result1, "客户端模式")
self.assertEqual(result2, "已连接")
self.assertIn("dBm", result3)
self.assertIn("wds_c", result5)
log.debug("011\t\tpass")
def test_004_routemode_system_upgrade_check_config(self):
"""路由模式下，系统升级，检查配置"""
tmp = SystemUpgradeBusiness(self.driver)
#选择固件路径，升级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['new_version'] + '.bin')
print(PATH)
tmp.upgrade_system(PATH)
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#判断wan口是否是静态IP
tmp3 = WanSettingsBusiness(self.driver)
result5 = tmp3.get_wan_way(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['new_version'])
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_wan['static_IP'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("static", result5)
self.assertTrue(result6)
log.debug("004\t\tpass")
def test_003_routemode_system_downgrade_check_config(self):
"""路由模式下，修改配置后，系统降级，检查配置"""
#修改工作模式为路由模式,外网设置static IP模式
tmp1 = WorkModeBusiness(self.driver)
tmp1.change_workmode_to_route_WANstaticIP(
data_wan['static_IP'], data_wan['netmask'], data_wan['gateway'],
data_wan['DNS'], data_wirless['all_ssid'], "psk2",
data_wirless['short_wpa'], "HT20", "auto")
time.sleep(60)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#选择固件路径，降级固件
PATH = os.path.join(
os.getcwd(), AP_model + '-' + data_basic['old_version'] + '.bin')
print(PATH)
tmp = SystemUpgradeBusiness(self.driver)
tmp.upgrade_system(PATH)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
#判断ssid是否恢复
tmp2 = WirelessSettingsBusiness(self.driver)
result4 = tmp2.get_first_ssid(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#判断wan口是否是静态IP
tmp3 = WanSettingsBusiness(self.driver)
result5 = tmp3.get_wan_way(data_basic['DUT_ip'],
data_basic['ssh_user'],
data_basic['ssh_pwd'])
#检查固件版本
result6 = tmp.check_system_version(data_basic['old_version'])
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "静态IP")
self.assertEqual(data_wan['static_IP'], result3)
self.assertIn(data_wirless['all_ssid'], result4)
self.assertIn("static", result5)
self.assertTrue(result6)
log.debug("003\t\tpass")
def test_001_set_wan_pppoe(self):
"""外网设置为pppoe，能否上网"""
#首先启用无线网卡
tmp = WanSettingsBusiness(self.driver)
tmp.wlan_enable(data_basic['wlan_pc'])
#刷新页面重新登录ap页面
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
#把AP恢复出厂配置
tmp1 = ConfigUpdateBusiness(self.driver)
tmp1.restore_AP_factory()
#重新登录AP
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#调用实例的登录AP的web界面
Lg.login(data_basic['superUser'], data_basic['super_defalut_pwd'])
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#设置外网为pppoe
tmp.change_wan_to_pppoe(data_wan['pppoe_user'],
data_wan['pppoe_password'], data_wan['DNS'])
time.sleep(30)
#逻辑类对象，建一个实例
Lg = LoginBusiness(self.driver)
#刷新页面重新登录ap页面
Lg.refresh_login_ap()
#判断ap能够上网
result4 = tmp.get_ping("www.baidu.com")
tmp1 = StateInfoBusiness(self.driver)
#获取当前模式
result1 = tmp1.obtain_AP_current_mode()
#获取外网的IP获取方式
result2 = tmp1.obtain_WAN_IP_generation()
#获取IP地址
result3 = tmp1.obtain_WAN_IP_address()
self.assertEqual(result1, "路由模式")
self.assertEqual(result2, "PPPOE拨号")
self.assertIn(data_wan['wan_str'], result3)
self.assertEqual(0, result4)
log.debug("001\t\tpass")