def test_projection():
p1 = Point(0, 0)
p2 = Point3D(0, 0, 0)
p3 = Point(-x1, x1)
l1 = Line(p1, Point(1, 1))
l2 = Line3D(Point3D(0, 0, 0), Point3D(1, 0, 0))
l3 = Line3D(p2, Point3D(1, 1, 1))
r1 = Ray(Point(1, 1), Point(2, 2))
assert Line(Point(x1, x1), Point(y1, y1)).projection(Point(y1, y1)) == Point(y1, y1)
assert Line(Point(x1, x1), Point(x1, 1 + x1)).projection(Point(1, 1)) == Point(x1, 1)
assert Segment(Point(0, 4), Point(-2, 2)).projection(r1) == Segment(Point(0, 4), Point(-1, 3))
assert Segment(Point(0, 4), Point(-2, 2)).projection(r1) == Segment(Point(0, 4), Point(-1, 3))
assert l1.projection(p3) == p1
assert l1.projection(Ray(p1, Point(-1, 5))) == Ray(Point(0, 0), Point(2, 2))
assert l1.projection(Ray(p1, Point(-1, 1))) == p1
assert r1.projection(Ray(Point(1, 1), Point(-1, -1))) == Point(1, 1)
assert r1.projection(Ray(Point(0, 4), Point(-1, -5))) == Segment(Point(1, 1), Point(2, 2))
assert r1.projection(Segment(Point(-1, 5), Point(-5, -10))) == Segment(Point(1, 1), Point(2, 2))
assert r1.projection(Ray(Point(1, 1), Point(-1, -1))) == Point(1, 1)
assert r1.projection(Ray(Point(0, 4), Point(-1, -5))) == Segment(Point(1, 1), Point(2, 2))
assert r1.projection(Segment(Point(-1, 5), Point(-5, -10))) == Segment(Point(1, 1), Point(2, 2))
assert l3.projection(Ray3D(p2, Point3D(-1, 5, 0))) == Ray3D(Point3D(0, 0, 0), Point3D(4 / 3, 4 / 3, 4 / 3))
assert l3.projection(Ray3D(p2, Point3D(-1, 1, 1))) == Ray3D(Point3D(0, 0, 0), Point3D(1 / 3, 1 / 3, 1 / 3))
assert l2.projection(Point3D(5, 5, 0)) == Point3D(5, 0)
assert l2.projection(Line3D(Point3D(0, 1, 0), Point3D(1, 1, 0))).equals(l2)
def test_distance_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
half = Rational(1, 2)
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
r = Ray(p1, p2)
assert s1.distance(Point(0, 0)) == 0
assert s1.distance((0, 0)) == 0
assert s2.distance(Point(0, 0)) == 2 ** half / 2
assert s2.distance(Point(Rational(3) / 2, Rational(3) / 2)) == 2 ** half
assert Line(p1, p2).distance(Point(-1, 1)) == sqrt(2)
assert Line(p1, p2).distance(Point(1, -1)) == sqrt(2)
assert Line(p1, p2).distance(Point(2, 2)) == 0
assert Line(p1, p2).distance((-1, 1)) == sqrt(2)
assert Line((0, 0), (0, 1)).distance(p1) == 0
assert Line((0, 0), (0, 1)).distance(p2) == 1
assert Line((0, 0), (1, 0)).distance(p1) == 0
assert Line((0, 0), (1, 0)).distance(p2) == 1
assert r.distance(Point(-1, -1)) == sqrt(2)
assert r.distance(Point(1, 1)) == 0
assert r.distance(Point(-1, 1)) == sqrt(2)
assert Ray((1, 1), (2, 2)).distance(Point(1.5, 3)) == 3 * sqrt(2) / 4
assert r.distance((1, 1)) == 0
def test_contains():
p1 = Point(0, 0)
r = Ray(p1, Point(4, 4))
r1 = Ray3D(p1, Point3D(0, 0, -1))
r2 = Ray3D(p1, Point3D(0, 1, 0))
r3 = Ray3D(p1, Point3D(0, 0, 1))
l = Line(Point(0, 1), Point(3, 4))
# Segment contains
assert Point(0, (a + b) / 2) in Segment((0, a), (0, b))
assert Point((a + b) / 2, 0) in Segment((a, 0), (b, 0))
assert Point3D(0, 1, 0) in Segment3D((0, 1, 0), (0, 1, 0))
assert Point3D(1, 0, 0) in Segment3D((1, 0, 0), (1, 0, 0))
assert Segment3D(Point3D(0, 0, 0), Point3D(1, 0, 0)).contains([]) is True
assert Segment3D(Point3D(0, 0, 0), Point3D(1, 0, 0)).contains(
Segment3D(Point3D(2, 2, 2), Point3D(3, 2, 2))) is False
# Line contains
assert l.contains(Point(0, 1)) is True
assert l.contains((0, 1)) is True
assert l.contains((0, 0)) is False
# Ray contains
assert r.contains(p1) is True
assert r.contains((1, 1)) is True
assert r.contains((1, 3)) is False
assert r.contains(Segment((1, 1), (2, 2))) is True
assert r.contains(Segment((1, 2), (2, 5))) is False
assert r.contains(Ray((2, 2), (3, 3))) is True
assert r.contains(Ray((2, 2), (3, 5))) is False
assert r1.contains(Segment3D(p1, Point3D(0, 0, -10))) is True
assert r1.contains(Segment3D(Point3D(1, 1, 1), Point3D(2, 2, 2))) is False
assert r2.contains(Point3D(0, 0, 0)) is True
assert r3.contains(Point3D(0, 0, 0)) is True
assert Ray3D(Point3D(1, 1, 1), Point3D(1, 0, 0)).contains([]) is False
assert Line3D((0, 0, 0), (x, y, z)).contains((2 * x, 2 * y, 2 * z))
with warnings.catch_warnings(record=True) as w:
assert Line3D(p1, Point3D(0, 1, 0)).contains(Point(1.0, 1.0)) is False
assert len(w) == 1
with warnings.catch_warnings(record=True) as w:
assert r3.contains(Point(1.0, 1.0)) is False
assert len(w) == 1
def test_arbitrary_point():
l1 = Line3D(Point3D(0, 0, 0), Point3D(1, 1, 1))
l2 = Line(Point(x1, x1), Point(y1, y1))
assert l2.arbitrary_point() in l2
assert Ray((1, 1), angle=pi / 4).arbitrary_point() == \
Point(t + 1, t + 1)
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2 * t)
assert l1.perpendicular_segment(
l1.arbitrary_point()) == l1.arbitrary_point()
assert Ray3D((1, 1, 1), direction_ratio=[1, 2, 3]).arbitrary_point() == \
Point3D(t + 1, 2 * t + 1, 3 * t + 1)
assert Segment3D(Point3D(0, 0, 0), Point3D(1, 1, 1)).midpoint == \
Point3D(Rational(1, 2), Rational(1, 2), Rational(1, 2))
assert Segment3D(Point3D(x1, x1, x1),
Point3D(y1, y1, y1)).length == sqrt(3) * sqrt(
(x1 - y1)**2)
assert Segment3D((1, 1, 1), (2, 3, 4)).arbitrary_point() == \
Point3D(t + 1, 2 * t + 1, 3 * t + 1)
def test_geometry_EvalfMixin():
x = pi
t = Symbol('t')
for g in [
Point(x, x),
Plane(Point(0, x, 0), (0, 0, x)),
Curve((x * t, x), (t, 0, x)),
Ellipse((x, x), x, -x),
Circle((x, x), x),
Line((0, x), (x, 0)),
Segment((0, x), (x, 0)),
Ray((0, x), (x, 0)),
Parabola((0, x), Line((-x, 0), (x, 0))),
Polygon((0, 0), (0, x), (x, 0), (x, x)),
RegularPolygon((0, x), x, 4, x),
Triangle((0, 0), (x, 0), (x, x)),
]:
assert str(g).replace('pi', '3.1') == str(g.n(2))
def test_contains():
p1 = Point(0, 0)
r = Ray(p1, Point(4, 4))
r1 = Ray3D(p1, Point3D(0, 0, -1))
r2 = Ray3D(p1, Point3D(0, 1, 0))
r3 = Ray3D(p1, Point3D(0, 0, 1))
l = Line(Point(0, 1), Point(3, 4))
# Segment contains
assert Point(0, (a + b) / 2) in Segment((0, a), (0, b))
assert Point((a + b) / 2, 0) in Segment((a, 0), (b, 0))
assert Point3D(0, 1, 0) in Segment3D((0, 1, 0), (0, 1, 0))
assert Point3D(1, 0, 0) in Segment3D((1, 0, 0), (1, 0, 0))
assert Segment3D(Point3D(0, 0, 0), Point3D(1, 0, 0)).contains([]) is True
assert Segment3D(Point3D(0, 0, 0), Point3D(1, 0, 0)).contains(
Segment3D(Point3D(2, 2, 2), Point3D(3, 2, 2))) is False
# Line contains
assert l.contains(Point(0, 1)) is True
assert l.contains((0, 1)) is True
assert l.contains((0, 0)) is False
# Ray contains
assert r.contains(p1) is True
assert r.contains((1, 1)) is True
assert r.contains((1, 3)) is False
assert r.contains(Segment((1, 1), (2, 2))) is True
assert r.contains(Segment((1, 2), (2, 5))) is False
assert r.contains(Ray((2, 2), (3, 3))) is True
assert r.contains(Ray((2, 2), (3, 5))) is False
assert r1.contains(Segment3D(p1, Point3D(0, 0, -10))) is True
assert r1.contains(Segment3D(Point3D(1, 1, 1), Point3D(2, 2, 2))) is False
assert r2.contains(Point3D(0, 0, 0)) is True
assert r3.contains(Point3D(0, 0, 0)) is True
assert Ray3D(Point3D(1, 1, 1), Point3D(1, 0, 0)).contains([]) is False
assert Line3D((0, 0, 0), (x, y, z)).contains((2 * x, 2 * y, 2 * z))
with warnings.catch_warnings(record=True) as w:
assert Line3D(p1, Point3D(0, 1, 0)).contains(Point(1.0, 1.0)) is False
assert len(w) == 1
with warnings.catch_warnings(record=True) as w:
assert r3.contains(Point(1.0, 1.0)) is False
assert len(w) == 1
def test_geometry():
def do_test(*g, s=GeometrySeries, **kwargs):
s1 = _build_series(*g, pt="g", **kwargs)
assert isinstance(s1, s)
# since the range could be None, it is imperative to test that label
# receive the correct value.
assert s1.label == str(g[0])
s2 = _build_series(*g, **kwargs)
assert isinstance(s2, s)
assert s2.label == str(g[0])
assert np.array_equal(s1.get_data(), s2.get_data(), equal_nan=True)
x, y, z = symbols("x, y, z")
do_test(Point2D(1, 2))
do_test(Point3D(1, 2, 3))
do_test(Ray((1, 2), (3, 4)))
do_test(Segment((1, 2), (3, 4)))
do_test(Line((1, 2), (3, 4)), (x, -5, 5))
do_test(Ray3D((1, 2, 3), (3, 4, 5)))
do_test(Segment3D((1, 2, 3), (3, 4, 5)))
do_test(Line3D((1, 2, 3), (3, 4, 5)))
do_test(Polygon((1, 2), 3, n=10))
do_test(Circle((1, 2), 3))
do_test(Ellipse((1, 2), hradius=3, vradius=2))
do_test(Plane((0, 0, 0), (1, 1, 1)), (x, -5, 5), (y, -4, 4), (z, -3, 3),
s=PlaneSeries)
# Interactive series. Note that GeometryInteractiveSeries is an instance of
# GeometrySeries
do_test(Point2D(x, y), params={x: 1, y: 2})
do_test(
Plane((x, y, z), (1, 1, 1)),
(x, -5, 5),
(y, -4, 4),
(z, -3, 3),
params={
x: 1,
y: 2,
z: 3
},
s=PlaneInteractiveSeries,
)
def compute_right_segment(self):
"""
Computing coordinates for right segment based on right angle and base info
"""
base_right_p = self.base.points[1]
right_ray = Ray(base_right_p, angle=self.right_angle / 180 * pi)
x_diff = self.base.length * self.right_length_coef * cos(
self.right_angle / 180 * pi)
y_diff = self.base.length * self.right_length_coef * sin(
self.right_angle / 180 * pi)
if right_ray.xdirection == "oo":
right_end_x = base_right_p.x + x_diff
else:
right_end_x = base_right_p.x - x_diff
if right_ray.ydirection == "oo":
right_end_y = base_right_p.y + y_diff
else:
right_end_y = base_right_p.y - y_diff
self.right_segment = Segment(
base_right_p, Point(float(right_end_x), float(right_end_y)))
def compute_reflection_segment_simple(ray_array, segment, ray_intensity,
r_factor):
"""
Compute reflection of last part of the ray from given segment. This function is used in scenario with
multiple reflective segments.
:param ray_array: Array representing parts of ray
:param segment: Segment that the ray should reflect from
:param ray_intensity: Intensity of ray before reflection
:param r_factor: Reflective factor of the material
:return: Updated ray array and intensity
"""
last_ray = ray_array[-1]
intersection = segment.intersection(last_ray)
if intersection:
reflected_ray, ray_intensity = compute_reflection(
last_ray, segment, ray_intensity, r_factor)
new_ray_array = ray_array[:-1]
new_ray_array.append(Ray(last_ray.p1, intersection[0]))
new_ray_array.append(reflected_ray)
ray_array = new_ray_array
return ray_array, ray_intensity
def test_subs():
p = Point(x, 2)
q = Point(1, 1)
r = Point(3, 4)
for o in [p,
Segment(p, q),
Ray(p, q),
Line(p, q),
Triangle(p, q, r),
RegularPolygon(p, 3, 6),
Polygon(p, q, r, Point(5, 4)),
Circle(p, 3),
Ellipse(p, 3, 4)]:
assert 'y' in str(o.subs(x, y))
assert p.subs({x: 1}) == Point(1, 2)
assert Point(1, 2).subs(Point(1, 2), Point(3, 4)) == Point(3, 4)
assert Point(1, 2).subs((1, 2), Point(3, 4)) == Point(3, 4)
assert Point(1, 2).subs(Point(1, 2), Point(3, 4)) == Point(3, 4)
assert Point(1, 2).subs(set([(1, 2)])) == Point(2, 2)
raises(ValueError, lambda: Point(1, 2).subs(1))
raises(ValueError, lambda: Point(1, 1).subs((Point(1, 1), Point(1,
2)), 1, 2))
def compute_reflection_segment_simple(ray_array, segment):
"""
Compute reflection of last part of the ray from given segment. If there is an intersection of ray and segment,
compute reflected ray, update ray intensity, update ray array. If there is not, return False and original values.
:param ray_array: array representing parts of ray
:param segment: segment that the ray should reflect from
:param previous_intersection: previous intersection of given ray on this segment
:param ray_intensity: intensity of ray before reflection
:param r_factor: reflective factor
:return: True/False whether the ray was reflected, possibly updated ray array, previous intersection and intensity
"""
last_ray = ray_array[-1]
intersection = segment.intersection(last_ray)
if intersection:
reflected_ray, ray_intensity = compute_reflection(
last_ray, segment, 1, 1)
new_ray_array = ray_array[:-1]
new_ray_array.append(Ray(last_ray.p1, intersection[0]))
new_ray_array.append(reflected_ray)
ray_array = new_ray_array
return ray_array
def closest_segment(segments: List[Segment], ray: Ray,
last_reflection: Segment) -> Segment:
"""
Find closest segment for given ray
:param segments: List of segments
:param ray: Ray
:param last_reflection: Segment of last reflection
:return: Closest segment
"""
intersection_dict = {}
for segment in segments:
intersection = ray.intersection(segment)
if intersection and segment != last_reflection:
ray_segment = Segment(ray.p1, intersection[0])
length = ray_segment.length
intersection_dict.setdefault(segment, length)
if intersection_dict == {}:
return []
min_value = min(intersection_dict.values())
segment = [
key for key in intersection_dict if intersection_dict[key] == min_value
]
return segment
def test_polygon():
a, b, c = Point(0, 0), Point(2, 0), Point(3, 3)
t = Triangle(a, b, c)
assert Polygon(a, Point(1, 0), b, c) == t
assert Polygon(Point(1, 0), b, c, a) == t
assert Polygon(b, c, a, Point(1, 0)) == t
# 2 "remove folded" tests
assert Polygon(a, Point(3, 0), b, c) == t
assert Polygon(a, b, Point(3, -1), b, c) == t
raises(GeometryError, lambda: Polygon((0, 0), (1, 0), (0, 1), (1, 1)))
p1 = Polygon(Point(0, 0), Point(3, -1), Point(6, 0), Point(4, 5),
Point(2, 3), Point(0, 3))
p2 = Polygon(Point(6, 0), Point(3, -1), Point(0, 0), Point(0, 3),
Point(2, 3), Point(4, 5))
p3 = Polygon(Point(0, 0), Point(3, 0), Point(5, 2), Point(4, 4))
p4 = Polygon(Point(0, 0), Point(4, 4), Point(5, 2), Point(3, 0))
p5 = Polygon(Point(0, 0), Point(4, 4), Point(0, 4))
p6 = Polygon(Point(-11, 1), Point(-9, 6.6), Point(-4, -3),
Point(-8.4, -8.7))
r = Ray(Point(-9, 6.6), Point(-9, 5.5))
#
# General polygon
#
assert p1 == p2
assert len(p1.args) == 6
assert len(p1.sides) == 6
assert p1.perimeter == 5 + 2 * sqrt(10) + sqrt(29) + sqrt(8)
assert p1.area == 22
assert not p1.is_convex()
# ensure convex for both CW and CCW point specification
assert p3.is_convex()
assert p4.is_convex()
dict5 = p5.angles
assert dict5[Point(0, 0)] == pi / 4
assert dict5[Point(0, 4)] == pi / 2
assert p5.encloses_point(Point(x, y)) is None
assert p5.encloses_point(Point(1, 3))
assert p5.encloses_point(Point(0, 0)) is False
assert p5.encloses_point(Point(4, 0)) is False
p5.plot_interval('x') == [x, 0, 1]
assert p5.distance(Polygon(Point(10, 10), Point(14, 14),
Point(10, 14))) == 6 * sqrt(2)
assert p5.distance(
Polygon(Point(1, 8), Point(5, 8), Point(8, 12), Point(1, 12))) == 4
warnings.filterwarnings(
"error", message="Polygons may intersect producing erroneous output")
raises(
UserWarning,
lambda: Polygon(Point(0, 0), Point(1, 0), Point(1, 1)).distance(
Polygon(Point(0, 0), Point(0, 1), Point(1, 1))))
warnings.filterwarnings(
"ignore", message="Polygons may intersect producing erroneous output")
assert hash(p5) == hash(Polygon(Point(0, 0), Point(4, 4), Point(0, 4)))
assert p5 == Polygon(Point(4, 4), Point(0, 4), Point(0, 0))
assert Polygon(Point(4, 4), Point(0, 4), Point(0, 0)) in p5
assert p5 != Point(0, 4)
assert Point(0, 1) in p5
assert p5.arbitrary_point('t').subs(Symbol('t', real=True), 0) == \
Point(0, 0)
raises(
ValueError, lambda: Polygon(Point(x, 0), Point(0, y), Point(x, y)).
arbitrary_point('x'))
assert p6.intersection(r) == [Point(-9, 33 / 5), Point(-9, -84 / 13)]
#
# Regular polygon
#
p1 = RegularPolygon(Point(0, 0), 10, 5)
p2 = RegularPolygon(Point(0, 0), 5, 5)
raises(GeometryError,
lambda: RegularPolygon(Point(0, 0), Point(0, 1), Point(1, 1)))
raises(GeometryError, lambda: RegularPolygon(Point(0, 0), 1, 2))
raises(ValueError, lambda: RegularPolygon(Point(0, 0), 1, 2.5))
assert p1 != p2
assert p1.interior_angle == 3 * pi / 5
assert p1.exterior_angle == 2 * pi / 5
assert p2.apothem == 5 * cos(pi / 5)
assert p2.circumcenter == p1.circumcenter == Point(0, 0)
assert p1.circumradius == p1.radius == 10
assert p2.circumcircle == Circle(Point(0, 0), 5)
assert p2.incircle == Circle(Point(0, 0), p2.apothem)
assert p2.inradius == p2.apothem == (5 * (1 + sqrt(5)) / 4)
p2.spin(pi / 10)
dict1 = p2.angles
assert dict1[Point(0, 5)] == 3 * pi / 5
assert p1.is_convex()
assert p1.rotation == 0
assert p1.encloses_point(Point(0, 0))
assert p1.encloses_point(Point(11, 0)) is False
assert p2.encloses_point(Point(0, 4.9))
p1.spin(pi / 3)
assert p1.rotation == pi / 3
assert p1.vertices[0] == Point(5, 5 * sqrt(3))
for var in p1.args:
if isinstance(var, Point):
assert var == Point(0, 0)
else:
assert var == 5 or var == 10 or var == pi / 3
assert p1 != Point(0, 0)
assert p1 != p5
# while spin works in place (notice that rotation is 2pi/3 below)
# rotate returns a new object
p1_old = p1
assert p1.rotate(pi / 3) == RegularPolygon(Point(0, 0), 10, 5, 2 * pi / 3)
assert p1 == p1_old
assert p1.area == (-250 * sqrt(5) + 1250) / (4 * tan(pi / 5))
assert p1.length == 20 * sqrt(-sqrt(5) / 8 + S(5) / 8)
assert p1.scale(2, 2) == \
RegularPolygon(p1.center, p1.radius*2, p1._n, p1.rotation)
assert RegularPolygon((0, 0), 1, 4).scale(2, 3) == \
Polygon(Point(2, 0), Point(0, 3), Point(-2, 0), Point(0, -3))
assert repr(p1) == str(p1)
#
# Angles
#
angles = p4.angles
assert feq(angles[Point(0, 0)].evalf(), Float("0.7853981633974483"))
assert feq(angles[Point(4, 4)].evalf(), Float("1.2490457723982544"))
assert feq(angles[Point(5, 2)].evalf(), Float("1.8925468811915388"))
assert feq(angles[Point(3, 0)].evalf(), Float("2.3561944901923449"))
angles = p3.angles
assert feq(angles[Point(0, 0)].evalf(), Float("0.7853981633974483"))
assert feq(angles[Point(4, 4)].evalf(), Float("1.2490457723982544"))
assert feq(angles[Point(5, 2)].evalf(), Float("1.8925468811915388"))
assert feq(angles[Point(3, 0)].evalf(), Float("2.3561944901923449"))
#
# Triangle
#
p1 = Point(0, 0)
p2 = Point(5, 0)
p3 = Point(0, 5)
t1 = Triangle(p1, p2, p3)
t2 = Triangle(p1, p2, Point(Rational(5, 2), sqrt(Rational(75, 4))))
t3 = Triangle(p1, Point(x1, 0), Point(0, x1))
s1 = t1.sides
assert Triangle(p1, p2, p1) == Polygon(p1, p2, p1) == Segment(p1, p2)
raises(GeometryError, lambda: Triangle(Point(0, 0)))
# Basic stuff
assert Triangle(p1, p1, p1) == p1
assert Triangle(p2, p2 * 2, p2 * 3) == Segment(p2, p2 * 3)
assert t1.area == Rational(25, 2)
assert t1.is_right()
assert t2.is_right() is False
assert t3.is_right()
assert p1 in t1
assert t1.sides[0] in t1
assert Segment((0, 0), (1, 0)) in t1
assert Point(5, 5) not in t2
assert t1.is_convex()
assert feq(t1.angles[p1].evalf(), pi.evalf() / 2)
assert t1.is_equilateral() is False
assert t2.is_equilateral()
assert t3.is_equilateral() is False
assert are_similar(t1, t2) is False
assert are_similar(t1, t3)
assert are_similar(t2, t3) is False
assert t1.is_similar(Point(0, 0)) is False
# Bisectors
bisectors = t1.bisectors()
assert bisectors[p1] == Segment(p1, Point(Rational(5, 2), Rational(5, 2)))
ic = (250 - 125 * sqrt(2)) / 50
assert t1.incenter == Point(ic, ic)
# Inradius
assert t1.inradius == t1.incircle.radius == 5 - 5 * sqrt(2) / 2
assert t2.inradius == t2.incircle.radius == 5 * sqrt(3) / 6
assert t3.inradius == t3.incircle.radius == x1**2 / (
(2 + sqrt(2)) * Abs(x1))
# Circumcircle
assert t1.circumcircle.center == Point(2.5, 2.5)
# Medians + Centroid
m = t1.medians
assert t1.centroid == Point(Rational(5, 3), Rational(5, 3))
assert m[p1] == Segment(p1, Point(Rational(5, 2), Rational(5, 2)))
assert t3.medians[p1] == Segment(p1, Point(x1 / 2, x1 / 2))
assert intersection(m[p1], m[p2], m[p3]) == [t1.centroid]
assert t1.medial == Triangle(Point(2.5, 0), Point(0, 2.5), Point(2.5, 2.5))
# Perpendicular
altitudes = t1.altitudes
assert altitudes[p1] == Segment(p1, Point(Rational(5, 2), Rational(5, 2)))
assert altitudes[p2] == s1[0]
assert altitudes[p3] == s1[2]
assert t1.orthocenter == p1
t = S('''Triangle(
Point(100080156402737/5000000000000, 79782624633431/500000000000),
Point(39223884078253/2000000000000, 156345163124289/1000000000000),
Point(31241359188437/1250000000000, 338338270939941/1000000000000000))''')
assert t.orthocenter == S(
'''Point(-780660869050599840216997'''
'''79471538701955848721853/80368430960602242240789074233100000000000000,'''
'''20151573611150265741278060334545897615974257/16073686192120448448157'''
'''8148466200000000000)''')
# Ensure
assert len(intersection(*bisectors.values())) == 1
assert len(intersection(*altitudes.values())) == 1
assert len(intersection(*m.values())) == 1
# Distance
p1 = Polygon(Point(0, 0), Point(1, 0), Point(1, 1), Point(0, 1))
p2 = Polygon(Point(0,
Rational(5) / 4), Point(1,
Rational(5) / 4),
Point(1,
Rational(9) / 4), Point(0,
Rational(9) / 4))
p3 = Polygon(Point(1, 2), Point(2, 2), Point(2, 1))
p4 = Polygon(Point(1, 1), Point(Rational(6) / 5, 1),
Point(1,
Rational(6) / 5))
pt1 = Point(half, half)
pt2 = Point(1, 1)
'''Polygon to Point'''
assert p1.distance(pt1) == half
assert p1.distance(pt2) == 0
assert p2.distance(pt1) == Rational(3) / 4
assert p3.distance(pt2) == sqrt(2) / 2
'''Polygon to Polygon'''
# p1.distance(p2) emits a warning
# First, test the warning
warnings.filterwarnings(
"error", message="Polygons may intersect producing erroneous output")
raises(UserWarning, lambda: p1.distance(p2))
# now test the actual output
warnings.filterwarnings(
"ignore", message="Polygons may intersect producing erroneous output")
assert p1.distance(p2) == half / 2
assert p1.distance(p3) == sqrt(2) / 2
assert p3.distance(p4) == (sqrt(2) / 2 - sqrt(Rational(2) / 25) / 2)
def __init__(self, color, position):
self.color = color
self.position = position
self.direction = Ray(position, (position[0], position[1] + 1))
self.next_event_time = 0
def test_closing_angle():
a = Ray((0, 0), angle=0)
b = Ray((1, 2), angle=pi/2)
assert a.closing_angle(b) == -pi/2
assert b.closing_angle(a) == pi/2
assert a.closing_angle(a) == 0
def test_intersection_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
l1 = Line(p1, p2)
l3 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(0, 0), Point(3, 4))
r4 = Ray(p1, p2)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
s1 = Segment(p1, p2)
s2 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
s3 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, p1) == [p1]
assert intersection(l1, Point(x1, 1 + x1)) == []
assert intersection(l1, Line(p3, p4)) in [[l1], [Line(p3, p4)]]
assert intersection(l1, l1.parallel_line(Point(x1, 1 + x1))) == []
assert intersection(l3, l3) == [l3]
assert intersection(l3, r2) == [r2]
assert intersection(l3, s3) == [s3]
assert intersection(s3, l3) == [s3]
assert intersection(Segment(Point(-10, 10), Point(10, 10)), Segment(Point(-5, -5), Point(-5, 5))) == []
assert intersection(r2, l3) == [r2]
assert intersection(r1, Ray(Point(2, 2), Point(0, 0))) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, Ray(Point(1, 1), Point(-1, -1))) == [Point(1, 1)]
assert intersection(r1, Segment(Point(0, 0), Point(2, 2))) == [Segment(Point(1, 1), Point(2, 2))]
assert r4.intersection(s2) == [s2]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(Ray(p2, p1)) == [s1]
assert Ray(p2, p1).intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
assert Ray3D((0, 0), (3, 0)).intersection(Ray3D((1, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray3D((1, 0), (3, 0)).intersection(Ray3D((0, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray(Point(0, 0), Point(0, 4)).intersection(Ray(Point(0, 1), Point(0, -1))) == \
[Segment(Point(0, 0), Point(0, 1))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((1, 0), (2, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((1, 0), (2, 0)).intersection(
Segment3D((0, 0), (3, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((3, 0), (4, 0))) == [Point3D((3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((2, 0), (5, 0))) == [Segment3D((3, 0), (2, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (1, 0))) == [Segment3D((0, 0), (1, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (0, 0))) == [Point3D(0, 0)]
assert s1.intersection(Segment(Point(1, 1), Point(2, 2))) == [Point(1, 1)]
assert s1.intersection(Segment(Point(0.5, 0.5), Point(1.5, 1.5))) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert s1.intersection(Line(Point(1, 0), Point(2, 1))) == []
assert s1.intersection(s2) == [s2]
assert s2.intersection(s1) == [s2]
def test_dimension_normalization():
with warnings.catch_warnings(record=True) as w:
assert Ray((1, 1), (2, 1, 2)) == Ray((1, 1, 0), (2, 1, 2))
assert len(w) == 1
def test_line():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
# Basic stuff
assert Line(p1, p2) == Line(p2, p1)
assert l1 == l2
assert l1 != l3
assert l1.slope == 1
assert l3.slope == oo
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert simplify(l1.equation()) in (x-y, y-x)
assert simplify(l3.equation()) in (x-x1, x1-x)
assert l2.arbitrary_point() in l2
for ind in xrange(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1) == l1_1
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1 , l2) == False
# Parallelity
p2_1 = Point(-2*x1, 0)
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1) == Line(p2_1, p1_1)
assert l2_1.parallel_line(p1) == Line(p1, Point(0, 2))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) == False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3,5), x1))
assert Line.is_concurrent(l1, l3)
assert Line.is_concurrent(l1, l3, l3_1)
assert Line.is_concurrent(l1, l1_1, l3) == False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf()/4)
# Testing Rays and Segments (very similar to Lines)
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
assert l1.projection(r1) == Ray(p1, p2)
assert l1.projection(r2) == p1
assert r3 != r1
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1,2), Rational(1,2))
assert s2.length == sqrt( 2*(x1**2) )
assert s1.perpendicular_bisector() == Line(Point(0, 1), Point(1, 0))
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3)/2, Rational(3)/2)
assert s1.distance(pt1) == 0
assert s2.distance(pt1) == 2**(half)/2
assert s2.distance(pt2) == 2**(half)
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10,10), Point(10,10))
entity2 = Segment(Point(-5,-5), Point(-5,5))
assert intersection(entity1, entity2) == []
def test_line():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
p6 = Point(1, 0)
p7 = Point(0, 1)
p8 = Point(2, 0)
p9 = Point(2, 1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
l4 = Line(p1, p6)
l5 = Line(p1, p7)
l6 = Line(p8, p9)
l7 = Line(p2, p9)
raises(ValueError, 'Line(Point(0, 0), Point(0, 0))')
# Basic stuff
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
raises(ValueError, 'Line((1, 1), 1)')
assert Line(p1, p2) == Line(p2, p1)
assert l1 == l2
assert l1 != l3
assert l1.slope == 1
assert l1.length == oo
assert l3.slope == oo
assert l4.slope == 0
assert l4.coefficients == (0, 1, 0)
assert l4.equation(x=x, y=y) == y
assert l5.slope == oo
assert l5.coefficients == (1, 0, 0)
assert l5.equation() == x
assert l6.equation() == x - 2
assert l7.equation() == y - 1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert Line(p1, p2).scale(2, 1) == Line(p1, p9)
assert l2.arbitrary_point() in l2
for ind in xrange(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1) == l1_1
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) == False
p = l1.random_point()
assert l1.perpendicular_segment(p) == p
# Parallelity
p2_1 = Point(-2 * x1, 0)
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1) == Line(p2_1, p1_1)
assert l2_1.parallel_line(p1) == Line(p1, Point(0, 2))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) == False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.is_concurrent(l1) == False
assert Line.is_concurrent(l1, l3)
assert Line.is_concurrent(l1, l3, l3_1)
assert Line.is_concurrent(l1, l1_1, l3) == False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
raises(
GeometryError,
'Line(Point(0, 0), Point(1, 0)).projection(Circle(Point(0, 0), 1))')
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf() / 4)
# Testing Rays and Segments (very similar to Lines)
assert Ray((1, 1), angle=pi / 4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi / 2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0 * pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0 * pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
# XXX don't know why this fails without str
assert str(Ray(
(1, 1),
angle=4.2 * pi)) == str(Ray(Point(1, 1), Point(2,
1 + C.tan(0.2 * pi))))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + C.tan(5)))
raises(ValueError, 'Ray((1, 1), 1)')
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
r4 = Ray(p1, p2)
r5 = Ray(p2, p1)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
assert l1.projection(r1) == Ray(p1, p2)
assert l1.projection(r2) == p1
assert r3 != r1
t = Symbol('t', real=True)
assert Ray(
(1, 1),
angle=pi / 4).arbitrary_point() == Point(1 / (1 - t), 1 / (1 - t))
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt(2 * (x1**2))
assert s1.perpendicular_bisector() == Line(Point(0, 1), Point(1, 0))
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2 * t)
# intersections
assert s1.intersection(Line(p6, p9)) == []
s3 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
assert s1.intersection(s3) == [s1]
assert s3.intersection(s1) == [s3]
assert r4.intersection(s3) == [s3]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(
0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
s3 = Segment(Point(1, 1), Point(2, 2))
assert s1.intersection(s3) == [Point(1, 1)]
s3 = Segment(Point(0.5, 0.5), Point(1.5, 1.5))
assert s1.intersection(s3) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(
0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(r5) == [s1]
assert r5.intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
# Segment contains
a, b = symbols('a,b')
s = Segment((0, a), (0, b))
assert Point(0, (a + b) / 2) in s
s = Segment((a, 0), (b, 0))
assert Point((a + b) / 2, 0) in s
raises(Undecidable, "Point(2*a, 0) in s")
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3) / 2, Rational(3) / 2)
assert s1.distance(pt1) == 0
assert s2.distance(pt1) == 2**(half) / 2
assert s2.distance(pt2) == 2**(half)
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
r5 = Ray(Point(2, 2), Point(3, 3))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
r3 = Ray(p1, p2)
r4 = Ray(p2, p1)
s1 = Segment(p1, Point(0, 1))
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert Segment(Point(0, -1), s1.random_point()).slope == s1.slope
p_r3 = r3.random_point()
p_r4 = r4.random_point()
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
p10 = Point(2000, 2000)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert p1.x <= p_s1.x and p_s1.x <= p10.x and p1.y <= p_s1.y and p_s1.y <= p10.y
s2 = Segment(p10, p1)
assert hash(s1) == hash(s2)
p11 = p10.scale(2, 2)
assert s1.is_similar(Segment(p10, p11))
assert s1.is_similar(r1) == False
assert (r1 in s1) == False
assert Segment(p1, p2) in s1
assert s1.plot_interval() == [t, 0, 1]
assert s1 in Line(p1, p10)
assert Line(p1, p10) == Line(p10, p1)
assert Line(p1, p10) != p1
assert Line(p1, p10).plot_interval() == [t, -5, 5]
def test_projection():
p1 = Point(0, 0)
p2 = Point3D(0, 0, 0)
p3 = Point(-x1, x1)
l1 = Line(p1, Point(1, 1))
l2 = Line3D(Point3D(0, 0, 0), Point3D(1, 0, 0))
l3 = Line3D(p2, Point3D(1, 1, 1))
r1 = Ray(Point(1, 1), Point(2, 2))
assert Line(Point(x1, x1),
Point(y1, y1)).projection(Point(y1, y1)) == Point(y1, y1)
assert Line(Point(x1, x1),
Point(x1, 1 + x1)).projection(Point(1, 1)) == Point(x1, 1)
assert Segment(Point(-2, 2),
Point(0,
4)).projection(r1) == Segment(Point(-1, 3),
Point(0, 4))
assert Segment(Point(0, 4),
Point(-2,
2)).projection(r1) == Segment(Point(0, 4),
Point(-1, 3))
assert l1.projection(p3) == p1
assert l1.projection(Ray(p1, Point(-1, 5))) == Ray(Point(0, 0),
Point(2, 2))
assert l1.projection(Ray(p1, Point(-1, 1))) == p1
assert r1.projection(Ray(Point(1, 1), Point(-1, -1))) == Point(1, 1)
assert r1.projection(Ray(Point(0, 4),
Point(-1,
-5))) == Segment(Point(1, 1), Point(2, 2))
assert r1.projection(Segment(Point(-1, 5), Point(-5, -10))) == Segment(
Point(1, 1), Point(2, 2))
assert r1.projection(Ray(Point(1, 1), Point(-1, -1))) == Point(1, 1)
assert r1.projection(Ray(Point(0, 4),
Point(-1,
-5))) == Segment(Point(1, 1), Point(2, 2))
assert r1.projection(Segment(Point(-1, 5), Point(-5, -10))) == Segment(
Point(1, 1), Point(2, 2))
assert l3.projection(Ray3D(p2, Point3D(-1, 5, 0))) == Ray3D(
Point3D(0, 0, 0),
Point3D(Rational(4, 3), Rational(4, 3), Rational(4, 3)))
assert l3.projection(Ray3D(p2, Point3D(-1, 1, 1))) == Ray3D(
Point3D(0, 0, 0),
Point3D(Rational(1, 3), Rational(1, 3), Rational(1, 3)))
assert l2.projection(Point3D(5, 5, 0)) == Point3D(5, 0)
assert l2.projection(Line3D(Point3D(0, 1, 0), Point3D(1, 1, 0))).equals(l2)
def test_closing_angle():
a = Ray((0, 0), angle=0)
b = Ray((1, 2), angle=pi / 2)
assert a.closing_angle(b) == -pi / 2
assert b.closing_angle(a) == pi / 2
assert a.closing_angle(a) == 0
def test_dimension_normalization():
with warns(UserWarning):
assert Ray((1, 1), (2, 1, 2)) == Ray((1, 1, 0), (2, 1, 2))
def test_line():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
# Basic stuff
assert Line(p1, p2) == Line(p2, p1)
assert l1 == l2
assert l1 != l3
assert l1.slope == 1
assert l3.slope == oo
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert l2.arbitrary_point() in l2
for ind in xrange(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1) == l1_1
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) == False
# Parallelity
p2_1 = Point(-2 * x1, 0)
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1) == Line(p2_1, p1_1)
assert l2_1.parallel_line(p1) == Line(p1, Point(0, 2))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) == False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.is_concurrent(l1, l3)
assert Line.is_concurrent(l1, l3, l3_1)
assert Line.is_concurrent(l1, l1_1, l3) == False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf() / 4)
# Testing Rays and Segments (very similar to Lines)
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
assert l1.projection(r1) == Ray(p1, p2)
assert l1.projection(r2) == p1
assert r3 != r1
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt(2 * (x1**2))
assert s1.perpendicular_bisector() == Line(Point(0, 1), Point(1, 0))
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3) / 2, Rational(3) / 2)
assert s1.distance(pt1) == 0
assert s2.distance(pt1) == 2**(half) / 2
assert s2.distance(pt2) == 2**(half)
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
def test_line_geom():
x = Symbol('x', real=True)
y = Symbol('y', real=True)
x1 = Symbol('x1', real=True)
y1 = Symbol('y1', real=True)
half = Rational(1, 2)
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
p6 = Point(1, 0)
p7 = Point(0, 1)
p8 = Point(2, 0)
p9 = Point(2, 1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
l4 = Line(p1, p6)
l5 = Line(p1, p7)
l6 = Line(p8, p9)
l7 = Line(p2, p9)
raises(ValueError, lambda: Line(Point(0, 0), Point(0, 0)))
# Basic stuff
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
raises(TypeError, lambda: Line((1, 1), 1))
assert Line(p1, p2) == Line(p1, p2)
assert Line(p1, p2) != Line(p2, p1)
assert l1 != l2
assert l1 != l3
assert l1.slope == 1
assert l1.length == oo
assert l3.slope == oo
assert l4.slope == 0
assert l4.coefficients == (0, 1, 0)
assert l4.equation(x=x, y=y) == y
assert l5.slope == oo
assert l5.coefficients == (1, 0, 0)
assert l5.equation() == x
assert l6.equation() == x - 2
assert l7.equation() == y - 1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert Line((-x, x), (-x + 1, x - 1)).coefficients == (1, 1, 0)
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert Line(p1, p2).scale(2, 1) == Line(p1, p9)
assert l2.arbitrary_point() in l2
for ind in range(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1.args).equals(
Line(Point(0, 0), Point(1, -1)))
assert l1.perpendicular_line(p1).equals(Line(Point(0, 0), Point(1, -1)))
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) is False
p = l1.random_point()
assert l1.perpendicular_segment(p) == p
# Parallelity
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1).equals(
Line(Point(-x1, x1), Point(-y1, 2 * x1 - y1)))
assert l2_1.parallel_line(p1.args).equals(Line(Point(0, 0), Point(0, -1)))
assert l2_1.parallel_line(p1).equals(Line(Point(0, 0), Point(0, -1)))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) is False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.are_concurrent(l1) is False
assert Line.are_concurrent(l1, l3)
assert Line.are_concurrent(l1, l1, l1, l3)
assert Line.are_concurrent(l1, l3, l3_1)
assert Line.are_concurrent(l1, l1_1, l3) is False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
raises(
GeometryError, lambda: Line(Point(0, 0), Point(1, 0)).projection(
Circle(Point(0, 0), 1)))
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf() / 4)
a = Point(1, 2, 3, 4)
b = a.orthogonal_direction
o = a.origin
assert Line(a, o).angle_between(Line(b, o)) == pi / 2
# Testing Rays and Segments (very similar to Lines)
assert Ray((1, 1), angle=pi / 4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi / 2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0 * pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0 * pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=4.05 * pi) == Ray(
Point(1, 1),
Point(
2, -sqrt(5) * sqrt(2 * sqrt(5) + 10) / 4 -
sqrt(2 * sqrt(5) + 10) / 4 + 2 + sqrt(5)))
assert Ray((1, 1), angle=4.02 * pi) == Ray(Point(1, 1),
Point(2, 1 + tan(4.02 * pi)))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + tan(5)))
raises(TypeError, lambda: Ray((1, 1), 1))
# issue 7963
r = Ray((0, 0), angle=x)
assert r.subs(x, 3 * pi / 4) == Ray((0, 0), (-1, 1))
assert r.subs(x, 5 * pi / 4) == Ray((0, 0), (-1, -1))
assert r.subs(x, -pi / 4) == Ray((0, 0), (1, -1))
assert r.subs(x, pi / 2) == Ray((0, 0), (0, 1))
assert r.subs(x, -pi / 2) == Ray((0, 0), (0, -1))
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
r4 = Ray(p1, p2)
r5 = Ray(p2, p1)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
assert l1.projection(r1) == Ray(Point(0, 0), Point(2, 2))
assert l1.projection(r2) == p1
assert r3 != r1
t = Symbol('t', real=True)
assert Ray((1, 1), angle=pi/4).arbitrary_point() == \
Point(t + 1, t + 1)
r8 = Ray(Point(0, 0), Point(0, 4))
r9 = Ray(Point(0, 1), Point(0, -1))
assert r8.intersection(r9) == [Segment(Point(0, 0), Point(0, 1))]
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt(2 * (x1**2))
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2 * t)
aline = Line(Point(1 / 2, 1 / 2), Point(3 / 2, -1 / 2))
assert s1.perpendicular_bisector().equals(aline)
on_line = Segment(Point(1 / 2, 1 / 2), Point(3 / 2, -1 / 2)).midpoint
assert s1.perpendicular_bisector(on_line) == Segment(s1.midpoint, on_line)
assert s1.perpendicular_bisector(on_line + (1, 0)).equals(aline)
# intersections
assert s1.intersection(Line(p6, p9)) == []
s3 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
assert s1.intersection(s3) == [s3]
assert s3.intersection(s1) == [s3]
assert r4.intersection(s3) == [s3]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == \
[Segment(p1, Point(0.5, 0.5))]
s3 = Segment(Point(1, 1), Point(2, 2))
assert s1.intersection(s3) == [Point(1, 1)]
s3 = Segment(Point(0.5, 0.5), Point(1.5, 1.5))
assert s1.intersection(s3) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == \
[Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(r5) == [s1]
assert r5.intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
# Segment contains
a, b = symbols('a,b', real=True)
s = Segment((0, a), (0, b))
assert Point(0, (a + b) / 2) in s
s = Segment((a, 0), (b, 0))
assert Point((a + b) / 2, 0) in s
raises(Undecidable, lambda: Point(2 * a, 0) in s)
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3) / 2, Rational(3) / 2)
assert s1.distance(pt1) == 0
assert s1.distance((0, 0)) == 0
assert s2.distance(pt1) == 2**(half) / 2
assert s2.distance(pt2) == 2**(half)
# Line to point
p1, p2 = Point(0, 0), Point(1, 1)
s = Line(p1, p2)
assert s.distance(Point(-1, 1)) == sqrt(2)
assert s.distance(Point(1, -1)) == sqrt(2)
assert s.distance(Point(2, 2)) == 0
assert s.distance((-1, 1)) == sqrt(2)
assert Line((0, 0), (0, 1)).distance(p1) == 0
assert Line((0, 0), (0, 1)).distance(p2) == 1
assert Line((0, 0), (1, 0)).distance(p1) == 0
assert Line((0, 0), (1, 0)).distance(p2) == 1
m = symbols('m', real=True)
l = Line((0, 5), slope=m)
p = Point(2, 3)
assert (l.distance(p) - 2 * abs(m + 1) / sqrt(m**2 + 1)).equals(0)
# Ray to point
r = Ray(p1, p2)
assert r.distance(Point(-1, -1)) == sqrt(2)
assert r.distance(Point(1, 1)) == 0
assert r.distance(Point(-1, 1)) == sqrt(2)
assert Ray((1, 1), (2, 2)).distance(Point(1.5, 3)) == 3 * sqrt(2) / 4
assert r.distance((1, 1)) == 0
#Line contains
p1, p2 = Point(0, 1), Point(3, 4)
l = Line(p1, p2)
assert l.contains(p1) is True
assert l.contains((0, 1)) is True
assert l.contains((0, 0)) is False
#Ray contains
p1, p2 = Point(0, 0), Point(4, 4)
r = Ray(p1, p2)
assert r.contains(p1) is True
assert r.contains((1, 1)) is True
assert r.contains((1, 3)) is False
s = Segment((1, 1), (2, 2))
assert r.contains(s) is True
s = Segment((1, 2), (2, 5))
assert r.contains(s) is False
r1 = Ray((2, 2), (3, 3))
assert r.contains(r1) is True
r1 = Ray((2, 2), (3, 5))
assert r.contains(r1) is False
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
r5 = Ray(Point(2, 2), Point(3, 3))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
r3 = Ray(p1, p2)
r4 = Ray(p2, p1)
s1 = Segment(p1, Point(0, 1))
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert Segment(Point(0, -1), s1.random_point()).slope == s1.slope
p_r3 = r3.random_point()
p_r4 = r4.random_point()
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
p10 = Point(2000, 2000)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert p1.x <= p_s1.x and p_s1.x <= p10.x and \
p1.y <= p_s1.y and p_s1.y <= p10.y
s2 = Segment(p10, p1)
assert hash(s1) == hash(s2)
p11 = p10.scale(2, 2)
assert s1.is_similar(Segment(p10, p11))
assert s1.is_similar(r1) is False
assert (r1 in s1) is False
assert Segment(p1, p2) in s1
assert s1.plot_interval() == [t, 0, 1]
assert s1 in Line(p1, p10)
assert Line(p1, p10) != Line(p10, p1)
assert Line(p1, p10) != p1
assert Line(p1, p10).plot_interval() == [t, -5, 5]
assert Ray((0, 0), angle=pi/4).plot_interval() == \
[t, 0, 10]
def test_dimension_normalization():
with warns(UserWarning, test_stacklevel=False):
assert Ray((1, 1), (2, 1, 2)) == Ray((1, 1, 0), (2, 1, 2))
def test_line_geom():
x = Symbol('x', real=True)
y = Symbol('y', real=True)
x1 = Symbol('x1', real=True)
y1 = Symbol('y1', real=True)
half = Rational(1, 2)
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
p6 = Point(1, 0)
p7 = Point(0, 1)
p8 = Point(2, 0)
p9 = Point(2, 1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
l4 = Line(p1, p6)
l5 = Line(p1, p7)
l6 = Line(p8, p9)
l7 = Line(p2, p9)
raises(ValueError, lambda: Line(Point(0, 0), Point(0, 0)))
# Basic stuff
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
raises(TypeError, lambda: Line((1, 1), 1))
assert Line(p1, p2) == Line(p1, p2)
assert Line(p1, p2) != Line(p2, p1)
assert l1 != l2
assert l1 != l3
assert l1.slope == 1
assert l1.length == oo
assert l3.slope == oo
assert l4.slope == 0
assert l4.coefficients == (0, 1, 0)
assert l4.equation(x=x, y=y) == y
assert l5.slope == oo
assert l5.coefficients == (1, 0, 0)
assert l5.equation() == x
assert l6.equation() == x - 2
assert l7.equation() == y - 1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert Line((-x, x), (-x + 1, x - 1)).coefficients == (1, 1, 0)
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert Line(p1, p2).scale(2, 1) == Line(p1, p9)
assert l2.arbitrary_point() in l2
for ind in range(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1.args).equals( Line(Point(0, 0), Point(1, -1)) )
assert l1.perpendicular_line(p1).equals( Line(Point(0, 0), Point(1, -1)) )
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) is False
p = l1.random_point()
assert l1.perpendicular_segment(p) == p
# Parallelity
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1).equals( Line(Point(-x1, x1), Point(-y1, 2*x1 - y1)) )
assert l2_1.parallel_line(p1.args).equals( Line(Point(0, 0), Point(0, -1)) )
assert l2_1.parallel_line(p1).equals( Line(Point(0, 0), Point(0, -1)) )
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) is False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.are_concurrent(l1) is False
assert Line.are_concurrent(l1, l3)
assert Line.are_concurrent(l1, l1, l1, l3)
assert Line.are_concurrent(l1, l3, l3_1)
assert Line.are_concurrent(l1, l1_1, l3) is False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
raises(GeometryError, lambda: Line(Point(0, 0), Point(1, 0))
.projection(Circle(Point(0, 0), 1)))
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf()/4)
a = Point(1, 2, 3, 4)
b = a.orthogonal_direction
o = a.origin
assert Line(a, o).angle_between(Line(b, o)) == pi/2
# Testing Rays and Segments (very similar to Lines)
assert Ray((1, 1), angle=pi/4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi/2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi/2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3*pi/2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5*pi/2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0*pi/2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0*pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0*pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=4.05*pi) == Ray(Point(1, 1),
Point(2, -sqrt(5)*sqrt(2*sqrt(5) + 10)/4 - sqrt(2*sqrt(5) + 10)/4 + 2 + sqrt(5)))
assert Ray((1, 1), angle=4.02*pi) == Ray(Point(1, 1),
Point(2, 1 + tan(4.02*pi)))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + tan(5)))
raises(TypeError, lambda: Ray((1, 1), 1))
# issue 7963
r = Ray((0, 0), angle=x)
assert r.subs(x, 3*pi/4) == Ray((0, 0), (-1, 1))
assert r.subs(x, 5*pi/4) == Ray((0, 0), (-1, -1))
assert r.subs(x, -pi/4) == Ray((0, 0), (1, -1))
assert r.subs(x, pi/2) == Ray((0, 0), (0, 1))
assert r.subs(x, -pi/2) == Ray((0, 0), (0, -1))
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
r4 = Ray(p1, p2)
r5 = Ray(p2, p1)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
assert l1.projection(r1) == Ray(Point(0, 0), Point(2, 2))
assert l1.projection(r2) == p1
assert r3 != r1
t = Symbol('t', real=True)
assert Ray((1, 1), angle=pi/4).arbitrary_point() == \
Point(t + 1, t + 1)
r8 = Ray(Point(0, 0), Point(0, 4))
r9 = Ray(Point(0, 1), Point(0, -1))
assert r8.intersection(r9) == [Segment(Point(0, 0), Point(0, 1))]
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt( 2*(x1**2) )
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2*t)
aline = Line(Point(1/2, 1/2), Point(3/2, -1/2))
assert s1.perpendicular_bisector().equals(aline)
on_line = Segment(Point(1/2, 1/2), Point(3/2, -1/2)).midpoint
assert s1.perpendicular_bisector(on_line) == Segment(s1.midpoint, on_line)
assert s1.perpendicular_bisector(on_line + (1, 0)).equals(aline)
# intersections
assert s1.intersection(Line(p6, p9)) == []
s3 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
assert s1.intersection(s3) == [s3]
assert s3.intersection(s1) == [s3]
assert r4.intersection(s3) == [s3]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == \
[Segment(p1, Point(0.5, 0.5))]
s3 = Segment(Point(1, 1), Point(2, 2))
assert s1.intersection(s3) == [Point(1, 1)]
s3 = Segment(Point(0.5, 0.5), Point(1.5, 1.5))
assert s1.intersection(s3) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == \
[Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(r5) == [s1]
assert r5.intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
# Segment contains
a, b = symbols('a,b', real=True)
s = Segment((0, a), (0, b))
assert Point(0, (a + b)/2) in s
s = Segment((a, 0), (b, 0))
assert Point((a + b)/2, 0) in s
raises(Undecidable, lambda: Point(2*a, 0) in s)
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3)/2, Rational(3)/2)
assert s1.distance(pt1) == 0
assert s1.distance((0, 0)) == 0
assert s2.distance(pt1) == 2**(half)/2
assert s2.distance(pt2) == 2**(half)
# Line to point
p1, p2 = Point(0, 0), Point(1, 1)
s = Line(p1, p2)
assert s.distance(Point(-1, 1)) == sqrt(2)
assert s.distance(Point(1, -1)) == sqrt(2)
assert s.distance(Point(2, 2)) == 0
assert s.distance((-1, 1)) == sqrt(2)
assert Line((0, 0), (0, 1)).distance(p1) == 0
assert Line((0, 0), (0, 1)).distance(p2) == 1
assert Line((0, 0), (1, 0)).distance(p1) == 0
assert Line((0, 0), (1, 0)).distance(p2) == 1
m = symbols('m', real=True)
l = Line((0, 5), slope=m)
p = Point(2, 3)
assert (l.distance(p) - 2*abs(m + 1)/sqrt(m**2 + 1)).equals(0)
# Ray to point
r = Ray(p1, p2)
assert r.distance(Point(-1, -1)) == sqrt(2)
assert r.distance(Point(1, 1)) == 0
assert r.distance(Point(-1, 1)) == sqrt(2)
assert Ray((1, 1), (2, 2)).distance(Point(1.5, 3)) == 3*sqrt(2)/4
assert r.distance((1, 1)) == 0
#Line contains
p1, p2 = Point(0, 1), Point(3, 4)
l = Line(p1, p2)
assert l.contains(p1) is True
assert l.contains((0, 1)) is True
assert l.contains((0, 0)) is False
#Ray contains
p1, p2 = Point(0, 0), Point(4, 4)
r = Ray(p1, p2)
assert r.contains(p1) is True
assert r.contains((1, 1)) is True
assert r.contains((1, 3)) is False
s = Segment((1, 1), (2, 2))
assert r.contains(s) is True
s = Segment((1, 2), (2, 5))
assert r.contains(s) is False
r1 = Ray((2, 2), (3, 3))
assert r.contains(r1) is True
r1 = Ray((2, 2), (3, 5))
assert r.contains(r1) is False
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
r5 = Ray(Point(2, 2), Point(3, 3))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
r3 = Ray(p1, p2)
r4 = Ray(p2, p1)
s1 = Segment(p1, Point(0, 1))
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert Segment(Point(0, -1), s1.random_point()).slope == s1.slope
p_r3 = r3.random_point()
p_r4 = r4.random_point()
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
p10 = Point(2000, 2000)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert p1.x <= p_s1.x and p_s1.x <= p10.x and \
p1.y <= p_s1.y and p_s1.y <= p10.y
s2 = Segment(p10, p1)
assert hash(s1) == hash(s2)
p11 = p10.scale(2, 2)
assert s1.is_similar(Segment(p10, p11))
assert s1.is_similar(r1) is False
assert (r1 in s1) is False
assert Segment(p1, p2) in s1
assert s1.plot_interval() == [t, 0, 1]
assert s1 in Line(p1, p10)
assert Line(p1, p10) != Line(p10, p1)
assert Line(p1, p10) != p1
assert Line(p1, p10).plot_interval() == [t, -5, 5]
assert Ray((0, 0), angle=pi/4).plot_interval() == \
[t, 0, 10]
def test_basic_properties_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p10 = Point(2000, 2000)
p_r3 = Ray(p1, p2).random_point()
p_r4 = Ray(p2, p1).random_point()
l1 = Line(p1, p2)
l3 = Line(Point(x1, x1), Point(x1, 1 + x1))
l4 = Line(p1, Point(1, 0))
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
assert Line(p1, p2).scale(2, 1) == Line(p1, Point(2, 1))
assert Line(p1, p2) == Line(p1, p2)
assert Line(p1, p2) != Line(p2, p1)
assert l1 != Line(Point(x1, x1), Point(y1, y1))
assert l1 != l3
assert Line(p1, p10) != Line(p10, p1)
assert Line(p1, p10) != p1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert s1 in Line(p1, p10)
assert Ray(Point(0, 0), Point(0, 1)) in Ray(Point(0, 0), Point(0, 2))
assert Ray(Point(0, 0), Point(0, 2)) in Ray(Point(0, 0), Point(0, 1))
assert (r1 in s1) is False
assert Segment(p1, p2) in s1
assert Ray(Point(x1, x1), Point(x1, 1 + x1)) != Ray(p1, Point(-1, 5))
assert Segment(p1, p2).midpoint == Point(S.Half, S.Half)
assert Segment(p1, Point(-x1, x1)).length == sqrt(2 * (x1**2))
assert l1.slope == 1
assert l3.slope is oo
assert l4.slope == 0
assert Line(p1, Point(0, 1)).slope is oo
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert (Segment(Point(0, -1),
Segment(p1, Point(0, 1)).random_point()).slope == Segment(
p1, Point(0, 1)).slope)
assert l4.coefficients == (0, 1, 0)
assert Line((-x, x), (-x + 1, x - 1)).coefficients == (1, 1, 0)
assert Line(p1, Point(0, 1)).coefficients == (1, 0, 0)
# issue 7963
r = Ray((0, 0), angle=x)
assert r.subs(x, 3 * pi / 4) == Ray((0, 0), (-1, 1))
assert r.subs(x, 5 * pi / 4) == Ray((0, 0), (-1, -1))
assert r.subs(x, -pi / 4) == Ray((0, 0), (1, -1))
assert r.subs(x, pi / 2) == Ray((0, 0), (0, 1))
assert r.subs(x, -pi / 2) == Ray((0, 0), (0, -1))
for ind in range(0, 5):
assert l3.random_point() in l3
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
assert p1.x <= p_s1.x <= p10.x and p1.y <= p_s1.y <= p10.y
assert hash(s1) != hash(Segment(p10, p1))
assert s1.plot_interval() == [t, 0, 1]
assert Line(p1, p10).plot_interval() == [t, -5, 5]
assert Ray((0, 0), angle=pi / 4).plot_interval() == [t, 0, 10]
def test_intersection_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
l1 = Line(p1, p2)
l3 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(0, 0), Point(3, 4))
r4 = Ray(p1, p2)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
s1 = Segment(p1, p2)
s2 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
s3 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, p1) == [p1]
assert intersection(l1, Point(x1, 1 + x1)) == []
assert intersection(l1, Line(p3, p4)) in [[l1], [Line(p3, p4)]]
assert intersection(l1, l1.parallel_line(Point(x1, 1 + x1))) == []
assert intersection(l3, l3) == [l3]
assert intersection(l3, r2) == [r2]
assert intersection(l3, s3) == [s3]
assert intersection(s3, l3) == [s3]
assert intersection(Segment(Point(-10, 10), Point(10, 10)), Segment(Point(-5, -5), Point(-5, 5))) == []
assert intersection(r2, l3) == [r2]
assert intersection(r1, Ray(Point(2, 2), Point(0, 0))) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, Ray(Point(1, 1), Point(-1, -1))) == [Point(1, 1)]
assert intersection(r1, Segment(Point(0, 0), Point(2, 2))) == [Segment(Point(1, 1), Point(2, 2))]
assert r4.intersection(s2) == [s2]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(Ray(p2, p1)) == [s1]
assert Ray(p2, p1).intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
assert Ray3D((0, 0), (3, 0)).intersection(Ray3D((1, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray3D((1, 0), (3, 0)).intersection(Ray3D((0, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray(Point(0, 0), Point(0, 4)).intersection(Ray(Point(0, 1), Point(0, -1))) == \
[Segment(Point(0, 0), Point(0, 1))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((1, 0), (2, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((1, 0), (2, 0)).intersection(
Segment3D((0, 0), (3, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((3, 0), (4, 0))) == [Point3D((3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((2, 0), (5, 0))) == [Segment3D((2, 0), (3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (1, 0))) == [Segment3D((0, 0), (1, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (0, 0))) == [Point3D(0, 0)]
assert s1.intersection(Segment(Point(1, 1), Point(2, 2))) == [Point(1, 1)]
assert s1.intersection(Segment(Point(0.5, 0.5), Point(1.5, 1.5))) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert s1.intersection(Line(Point(1, 0), Point(2, 1))) == []
assert s1.intersection(s2) == [s2]
assert s2.intersection(s1) == [s2]
assert asa(120, 8, 52) == \
Triangle(
Point(0, 0),
Point(8, 0),
Point(-4 * cos(19 * pi / 90) / sin(2 * pi / 45),
4 * sqrt(3) * cos(19 * pi / 90) / sin(2 * pi / 45)))
assert Line((0, 0), (1, 1)).intersection(Ray((1, 0), (1, 2))) == [Point(1, 1)]
assert Line((0, 0), (1, 1)).intersection(Segment((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Ray((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Segment((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (10, 10)).contains(Segment((1, 1), (2, 2))) is True
assert Segment((1, 1), (2, 2)) in Line((0, 0), (10, 10))
assert s1.intersection(Ray((1, 1), (4, 4))) == [Point(1, 1)]
# 16628 - this should be fast
p0 = Point2D(Rational(249, 5), Rational(497999, 10000))
p1 = Point2D((-58977084786*sqrt(405639795226) + 2030690077184193 +
20112207807*sqrt(630547164901) + 99600*sqrt(255775022850776494562626))
/(2000*sqrt(255775022850776494562626) + 1991998000*sqrt(405639795226)
+ 1991998000*sqrt(630547164901) + 1622561172902000),
(-498000*sqrt(255775022850776494562626) - 995999*sqrt(630547164901) +
90004251917891999 +
496005510002*sqrt(405639795226))/(10000*sqrt(255775022850776494562626)
+ 9959990000*sqrt(405639795226) + 9959990000*sqrt(630547164901) +
8112805864510000))
p2 = Point2D(Rational(497, 10), Rational(-497, 10))
p3 = Point2D(Rational(-497, 10), Rational(-497, 10))
l = Line(p0, p1)
s = Segment(p2, p3)
n = (-52673223862*sqrt(405639795226) - 15764156209307469 -
9803028531*sqrt(630547164901) +
33200*sqrt(255775022850776494562626))
d = sqrt(405639795226) + 315274080450 + 498000*sqrt(
630547164901) + sqrt(255775022850776494562626)
assert intersection(l, s) == [
Point2D(n/d*Rational(3, 2000), Rational(-497, 10))]
def test_intersection_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
l1 = Line(p1, p2)
l3 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(0, 0), Point(3, 4))
r4 = Ray(p1, p2)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
s1 = Segment(p1, p2)
s2 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
s3 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, p1) == [p1]
assert intersection(l1, Point(x1, 1 + x1)) == []
assert intersection(l1, Line(p3, p4)) in [[l1], [Line(p3, p4)]]
assert intersection(l1, l1.parallel_line(Point(x1, 1 + x1))) == []
assert intersection(l3, l3) == [l3]
assert intersection(l3, r2) == [r2]
assert intersection(l3, s3) == [s3]
assert intersection(s3, l3) == [s3]
assert (intersection(Segment(Point(-10, 10), Point(10, 10)),
Segment(Point(-5, -5), Point(-5, 5))) == [])
assert intersection(r2, l3) == [r2]
assert intersection(r1,
Ray(Point(2, 2),
Point(0,
0))) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, Ray(Point(1, 1), Point(-1, -1))) == [Point(1, 1)]
assert intersection(r1, Segment(Point(0, 0), Point(
2, 2))) == [Segment(Point(1, 1), Point(2, 2))]
assert r4.intersection(s2) == [s2]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(
0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(Ray(p2, p1)) == [s1]
assert Ray(p2, p1).intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
assert Ray3D((0, 0), (3, 0)).intersection(Ray3D(
(1, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray3D((1, 0), (3, 0)).intersection(Ray3D(
(0, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray(Point(0, 0), Point(0, 4)).intersection(
Ray(Point(0, 1), Point(0, -1))) == [Segment(Point(0, 0), Point(0, 1))]
assert Segment3D((0, 0), (3, 0)).intersection(Segment3D(
(1, 0), (2, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((1, 0), (2, 0)).intersection(Segment3D(
(0, 0), (3, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(Segment3D(
(3, 0), (4, 0))) == [Point3D((3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(Segment3D(
(2, 0), (5, 0))) == [Segment3D((2, 0), (3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(Segment3D(
(-2, 0), (1, 0))) == [Segment3D((0, 0), (1, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(Segment3D(
(-2, 0), (0, 0))) == [Point3D(0, 0)]
assert s1.intersection(Segment(Point(1, 1), Point(2, 2))) == [Point(1, 1)]
assert s1.intersection(Segment(Point(0.5, 0.5), Point(
1.5, 1.5))) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(
0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert s1.intersection(Line(Point(1, 0), Point(2, 1))) == []
assert s1.intersection(s2) == [s2]
assert s2.intersection(s1) == [s2]
assert asa(120, 8, 52) == Triangle(
Point(0, 0),
Point(8, 0),
Point(
-4 * cos(19 * pi / 90) / sin(2 * pi / 45),
4 * sqrt(3) * cos(19 * pi / 90) / sin(2 * pi / 45),
),
)
assert Line((0, 0), (1, 1)).intersection(Ray((1, 0),
(1, 2))) == [Point(1, 1)]
assert Line((0, 0), (1, 1)).intersection(Segment((1, 0),
(1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Ray((1, 0),
(1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Segment((1, 0),
(1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (10, 10)).contains(Segment((1, 1), (2, 2))) is True
assert Segment((1, 1), (2, 2)) in Line((0, 0), (10, 10))
assert s1.intersection(Ray((1, 1), (4, 4))) == [Point(1, 1)]
class Photon:
position: Point
imprecise_position: Point
ray: Ray
checked_circles: List[Circle]
distance: Rational
def __init__(self, position: Point, angle: float,
distance: Rational) -> None:
"""
Creates a new photon with the given current position, angle and distance to cover.
:param position: starting position of the photon
:param angle: starting angle of the photon
:param distance: distance to cover
:rtype: None
"""
# Current position which one changes when the src hits a circle.
self.position = position
# Imprecise current position used for ray tracing.
self.imprecise_position = Point(position, evaluate=False)
# Current heading of the src.
self.ray = Ray(position, angle=angle)
# Circles we have already checked before, after the last reflection, so we don't have to do it again.
self.checked_circles = []
# Distance left to cover.
self.distance = distance
def jump_to_position(self) -> None:
"""
Draws a line from the current turtle position to self.position.
Sets current turtle position to self.position.
:rtype: None
"""
set_position(float(self.position.x), float(self.position.y))
def invisible_jump_to_position(self) -> None:
"""
Sets current turtle position to self.position without drawing a line.
:rtype: None
"""
inv_set_position(float(self.position.x), float(self.position.y))
def raytrace(self) -> None:
"""
Moves imprecise_position STEP distance in the direction of the photon.
:rtype: None
"""
self.imprecise_position = self.imprecise_position.translate(
(STEP * self.ray.direction.x).evalf(PRECISION),
(STEP * self.ray.direction.y).evalf(PRECISION))
def check_nearby_circles(self) -> None:
"""
Checks the circles around the photon to see if it has collided with any of them.
If it has, it sets the new position and calls self.reflect with the previous position and the collided circle.
Otherwise, it adds the circle to checked_circles.
:rtype: None
"""
for (x, y) in self.possible_centers():
center = Point(x, y)
circle = Circle(center, RADIUS)
# If we already checked that circle after the last reflection.
if circle in self.checked_circles:
continue
intersect = intersection(self.ray, circle)
prev_position = self.position
# If intersection returns one Point, set position to it.
if len(intersect) == 1:
self.position = intersect[0]
self.reflect(prev_position, circle)
break
# If intersection returns two Points, find the closer one and set position to it.
elif len(intersect) == 2:
if (self.position.distance(intersect[0]).evalf(PRECISION)) < \
(self.position.distance(intersect[1]).evalf(PRECISION)):
self.position = intersect[0]
else:
self.position = intersect[1]
self.reflect(prev_position, circle)
break
# Otherwise we have not collided with that circle, so we add it to the circles list.
else:
self.checked_circles.append(circle)
def reflect(self, prev_position: Point, circle: Circle) -> None:
"""
Reflects the photon on the given circle.
- calculates distance covered and subtracts it from self.distance
- calculates new direction vector
- jumps to the new position and prints it
:rtype: None
"""
if prev_position.distance(self.position) > self.distance:
self.position = prev_position.translate(
self.ray.direction.x * self.distance,
self.ray.direction.y * self.distance)
self.distance = 0
return
self.distance -= prev_position.distance(self.position).evalf(PRECISION)
self.checked_circles = [circle]
tangent = circle.tangent_lines(self.position)[0]
self.position = Point(self.position.x.evalf(PRECISION),
self.position.y.evalf(PRECISION))
self.imprecise_position = self.position
direction = self.position + self.ray.reflect(tangent).direction
direction = Point(direction.x.evalf(PRECISION),
direction.y.evalf(PRECISION))
self.ray = Ray(self.position, direction)
self.jump_to_position()
dot()
self.print_position()
def possible_centers(self) -> Generator[Tuple[float, float], None, None]:
"""
Returns the possible centers of the circles around the photon as a generator.
:return: a generator for the possible circle centers
:rtype: Generator[Tuple[float, float]]
"""
# The only circles we have to check are the ones with these center coordinates.
possible_center_x = [
floor(self.imprecise_position.x),
ceil(self.imprecise_position.x)
]
possible_center_y = [
floor(self.imprecise_position.y),
ceil(self.imprecise_position.y)
]
for center_x in possible_center_x:
for center_y in possible_center_y:
yield (center_x, center_y)
def print_position(self) -> None:
"""
Print coordinates of the current position.
:rtype: None
"""
x = self.position.x.evalf(PRECISION)
y = self.position.y.evalf(PRECISION)
print(f'{x: 1.15f} {y: 1.15f}')
def test_ray_generation():
assert Ray((1, 1), angle=pi / 4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi / 2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0 * pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0 * pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=4.05 * pi) == Ray(
Point(1, 1),
Point(
2,
-sqrt(5) * sqrt(2 * sqrt(5) + 10) / 4 -
sqrt(2 * sqrt(5) + 10) / 4 + 2 + sqrt(5),
),
)
assert Ray((1, 1), angle=4.02 * pi) == Ray(Point(1, 1),
Point(2, 1 + tan(4.02 * pi)))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + tan(5)))
assert Ray3D((1, 1, 1),
direction_ratio=[4, 4, 4]) == Ray3D(Point3D(1, 1, 1),
Point3D(5, 5, 5))
assert Ray3D((1, 1, 1),
direction_ratio=[1, 2, 3]) == Ray3D(Point3D(1, 1, 1),
Point3D(2, 3, 4))
assert Ray3D((1, 1, 1),
direction_ratio=[1, 1, 1]) == Ray3D(Point3D(1, 1, 1),
Point3D(2, 2, 2))
def test_basic_properties_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p10 = Point(2000, 2000)
p_r3 = Ray(p1, p2).random_point()
p_r4 = Ray(p2, p1).random_point()
l1 = Line(p1, p2)
l3 = Line(Point(x1, x1), Point(x1, 1 + x1))
l4 = Line(p1, Point(1, 0))
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
assert Line(p1, p2).scale(2, 1) == Line(p1, Point(2, 1))
assert Line(p1, p2) == Line(p1, p2)
assert Line(p1, p2) != Line(p2, p1)
assert l1 != Line(Point(x1, x1), Point(y1, y1))
assert l1 != l3
assert Line(p1, p10) != Line(p10, p1)
assert Line(p1, p10) != p1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert s1 in Line(p1, p10)
assert Ray(Point(0, 0), Point(0, 1)) in Ray(Point(0, 0), Point(0, 2))
assert Ray(Point(0, 0), Point(0, 2)) in Ray(Point(0, 0), Point(0, 1))
assert (r1 in s1) is False
assert Segment(p1, p2) in s1
assert Ray(Point(x1, x1), Point(x1, 1 + x1)) != Ray(p1, Point(-1, 5))
assert Segment(p1, p2).midpoint == Point(Rational(1, 2), Rational(1, 2))
assert Segment(p1, Point(-x1, x1)).length == sqrt(2 * (x1 ** 2))
assert l1.slope == 1
assert l3.slope == oo
assert l4.slope == 0
assert Line(p1, Point(0, 1)).slope == oo
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert Segment(Point(0, -1), Segment(p1, Point(0, 1)).random_point()).slope == Segment(p1, Point(0, 1)).slope
assert l4.coefficients == (0, 1, 0)
assert Line((-x, x), (-x + 1, x - 1)).coefficients == (1, 1, 0)
assert Line(p1, Point(0, 1)).coefficients == (1, 0, 0)
# issue 7963
r = Ray((0, 0), angle=x)
assert r.subs(x, 3 * pi / 4) == Ray((0, 0), (-1, 1))
assert r.subs(x, 5 * pi / 4) == Ray((0, 0), (-1, -1))
assert r.subs(x, -pi / 4) == Ray((0, 0), (1, -1))
assert r.subs(x, pi / 2) == Ray((0, 0), (0, 1))
assert r.subs(x, -pi / 2) == Ray((0, 0), (0, -1))
for ind in range(0, 5):
assert l3.random_point() in l3
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
assert p1.x <= p_s1.x <= p10.x and p1.y <= p_s1.y <= p10.y
assert hash(s1) == hash(Segment(p10, p1))
assert s1.plot_interval() == [t, 0, 1]
assert Line(p1, p10).plot_interval() == [t, -5, 5]
assert Ray((0, 0), angle=pi / 4).plot_interval() == [t, 0, 10]
def test_line():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
p6 = Point(1, 0)
p7 = Point(0, 1)
p8 = Point(2, 0)
p9 = Point(2, 1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
l4 = Line(p1, p6)
l5 = Line(p1, p7)
l6 = Line(p8, p9)
l7 = Line(p2, p9)
# Basic stuff
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
raises(ValueError, "Line((1, 1), 1)")
assert Line(p1, p2) == Line(p2, p1)
assert l1 == l2
assert l1 != l3
assert l1.slope == 1
assert l3.slope == oo
assert l4.slope == 0
assert l4.coefficients == (0, 1, 0)
assert l4.equation(x=x, y=y) == y
assert l5.slope == oo
assert l5.coefficients == (1, 0, 0)
assert l5.equation() == x
assert l6.equation() == x - 2
assert l7.equation() == y - 1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert l2.arbitrary_point() in l2
for ind in xrange(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1) == l1_1
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) == False
# Parallelity
p2_1 = Point(-2 * x1, 0)
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1) == Line(p2_1, p1_1)
assert l2_1.parallel_line(p1) == Line(p1, Point(0, 2))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) == False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.is_concurrent(l1, l3)
assert Line.is_concurrent(l1, l3, l3_1)
assert Line.is_concurrent(l1, l1_1, l3) == False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf() / 4)
# Testing Rays and Segments (very similar to Lines)
assert Ray((1, 1), angle=pi / 4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi / 2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0 * pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0 * pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
# XXX don't know why this fails without str
assert str(Ray((1, 1), angle=4.2 * pi)) == str(Ray(Point(1, 1), Point(2, 1 + C.tan(0.2 * pi))))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + C.tan(5)))
raises(ValueError, "Ray((1, 1), 1)")
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
assert l1.projection(r1) == Ray(p1, p2)
assert l1.projection(r2) == p1
assert r3 != r1
t = Symbol("t", real=True)
assert Ray((1, 1), angle=pi / 4).arbitrary_point() == Point(1 / (1 - t), 1 / (1 - t))
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt(2 * (x1 ** 2))
assert s1.perpendicular_bisector() == Line(Point(0, 1), Point(1, 0))
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2 * t)
# Segment contains
a, b = symbols("a,b")
s = Segment((0, a), (0, b))
assert Point(0, (a + b) / 2) in s
s = Segment((a, 0), (b, 0))
assert Point((a + b) / 2, 0) in s
assert (Point(2 * a, 0) in s) is False # XXX should be None?
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3) / 2, Rational(3) / 2)
assert s1.distance(pt1) == 0
assert s2.distance(pt1) == 2 ** (half) / 2
assert s2.distance(pt2) == 2 ** (half)
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
def test_ellipse_geom():
x = Symbol('x', real=True)
y = Symbol('y', real=True)
t = Symbol('t', real=True)
y1 = Symbol('y1', real=True)
half = Rational(1, 2)
p1 = Point(0, 0)
p2 = Point(1, 1)
p4 = Point(0, 1)
e1 = Ellipse(p1, 1, 1)
e2 = Ellipse(p2, half, 1)
e3 = Ellipse(p1, y1, y1)
c1 = Circle(p1, 1)
c2 = Circle(p2, 1)
c3 = Circle(Point(sqrt(2), sqrt(2)), 1)
l1 = Line(p1, p2)
# Test creation with three points
cen, rad = Point(3*half, 2), 5*half
assert Circle(Point(0, 0), Point(3, 0), Point(0, 4)) == Circle(cen, rad)
assert Circle(Point(0, 0), Point(1, 1), Point(2, 2)) == Segment2D(Point2D(0, 0), Point2D(2, 2))
raises(ValueError, lambda: Ellipse(None, None, None, 1))
raises(GeometryError, lambda: Circle(Point(0, 0)))
# Basic Stuff
assert Ellipse(None, 1, 1).center == Point(0, 0)
assert e1 == c1
assert e1 != e2
assert e1 != l1
assert p4 in e1
assert p2 not in e2
assert e1.area == pi
assert e2.area == pi/2
assert e3.area == pi*y1*abs(y1)
assert c1.area == e1.area
assert c1.circumference == e1.circumference
assert e3.circumference == 2*pi*y1
assert e1.plot_interval() == e2.plot_interval() == [t, -pi, pi]
assert e1.plot_interval(x) == e2.plot_interval(x) == [x, -pi, pi]
assert c1.minor == 1
assert c1.major == 1
assert c1.hradius == 1
assert c1.vradius == 1
assert Ellipse((1, 1), 0, 0) == Point(1, 1)
assert Ellipse((1, 1), 1, 0) == Segment(Point(0, 1), Point(2, 1))
assert Ellipse((1, 1), 0, 1) == Segment(Point(1, 0), Point(1, 2))
# Private Functions
assert hash(c1) == hash(Circle(Point(1, 0), Point(0, 1), Point(0, -1)))
assert c1 in e1
assert (Line(p1, p2) in e1) is False
assert e1.__cmp__(e1) == 0
assert e1.__cmp__(Point(0, 0)) > 0
# Encloses
assert e1.encloses(Segment(Point(-0.5, -0.5), Point(0.5, 0.5))) is True
assert e1.encloses(Line(p1, p2)) is False
assert e1.encloses(Ray(p1, p2)) is False
assert e1.encloses(e1) is False
assert e1.encloses(
Polygon(Point(-0.5, -0.5), Point(-0.5, 0.5), Point(0.5, 0.5))) is True
assert e1.encloses(RegularPolygon(p1, 0.5, 3)) is True
assert e1.encloses(RegularPolygon(p1, 5, 3)) is False
assert e1.encloses(RegularPolygon(p2, 5, 3)) is False
assert e2.arbitrary_point() in e2
# Foci
f1, f2 = Point(sqrt(12), 0), Point(-sqrt(12), 0)
ef = Ellipse(Point(0, 0), 4, 2)
assert ef.foci in [(f1, f2), (f2, f1)]
# Tangents
v = sqrt(2) / 2
p1_1 = Point(v, v)
p1_2 = p2 + Point(half, 0)
p1_3 = p2 + Point(0, 1)
assert e1.tangent_lines(p4) == c1.tangent_lines(p4)
assert e2.tangent_lines(p1_2) == [Line(Point(S(3)/2, 1), Point(S(3)/2, S(1)/2))]
assert e2.tangent_lines(p1_3) == [Line(Point(1, 2), Point(S(5)/4, 2))]
assert c1.tangent_lines(p1_1) != [Line(p1_1, Point(0, sqrt(2)))]
assert c1.tangent_lines(p1) == []
assert e2.is_tangent(Line(p1_2, p2 + Point(half, 1)))
assert e2.is_tangent(Line(p1_3, p2 + Point(half, 1)))
assert c1.is_tangent(Line(p1_1, Point(0, sqrt(2))))
assert e1.is_tangent(Line(Point(0, 0), Point(1, 1))) is False
assert c1.is_tangent(e1) is True
assert c1.is_tangent(Ellipse(Point(2, 0), 1, 1)) is True
assert c1.is_tangent(
Polygon(Point(1, 1), Point(1, -1), Point(2, 0))) is True
assert c1.is_tangent(
Polygon(Point(1, 1), Point(1, 0), Point(2, 0))) is False
assert Circle(Point(5, 5), 3).is_tangent(Circle(Point(0, 5), 1)) is False
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(0, 0)) == \
[Line(Point(0, 0), Point(S(77)/25, S(132)/25)),
Line(Point(0, 0), Point(S(33)/5, S(22)/5))]
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(3, 4)) == \
[Line(Point(3, 4), Point(4, 4)), Line(Point(3, 4), Point(3, 5))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(3, 3)) == \
[Line(Point(3, 3), Point(4, 3)), Line(Point(3, 3), Point(3, 4))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(5 - 2*sqrt(2), 5)) == \
[Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 - sqrt(2))),
Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 + sqrt(2))), ]
# for numerical calculations, we shouldn't demand exact equality,
# so only test up to the desired precision
def lines_close(l1, l2, prec):
""" tests whether l1 and 12 are within 10**(-prec)
of each other """
return abs(l1.p1 - l2.p1) < 10**(-prec) and abs(l1.p2 - l2.p2) < 10**(-prec)
def line_list_close(ll1, ll2, prec):
return all(lines_close(l1, l2, prec) for l1, l2 in zip(ll1, ll2))
e = Ellipse(Point(0, 0), 2, 1)
assert e.normal_lines(Point(0, 0)) == \
[Line(Point(0, 0), Point(0, 1)), Line(Point(0, 0), Point(1, 0))]
assert e.normal_lines(Point(1, 0)) == \
[Line(Point(0, 0), Point(1, 0))]
assert e.normal_lines((0, 1)) == \
[Line(Point(0, 0), Point(0, 1))]
assert line_list_close(e.normal_lines(Point(1, 1), 2), [
Line(Point(-S(51)/26, -S(1)/5), Point(-S(25)/26, S(17)/83)),
Line(Point(S(28)/29, -S(7)/8), Point(S(57)/29, -S(9)/2))], 2)
# test the failure of Poly.intervals and checks a point on the boundary
p = Point(sqrt(3), S.Half)
assert p in e
assert line_list_close(e.normal_lines(p, 2), [
Line(Point(-S(341)/171, -S(1)/13), Point(-S(170)/171, S(5)/64)),
Line(Point(S(26)/15, -S(1)/2), Point(S(41)/15, -S(43)/26))], 2)
# be sure to use the slope that isn't undefined on boundary
e = Ellipse((0, 0), 2, 2*sqrt(3)/3)
assert line_list_close(e.normal_lines((1, 1), 2), [
Line(Point(-S(64)/33, -S(20)/71), Point(-S(31)/33, S(2)/13)),
Line(Point(1, -1), Point(2, -4))], 2)
# general ellipse fails except under certain conditions
e = Ellipse((0, 0), x, 1)
assert e.normal_lines((x + 1, 0)) == [Line(Point(0, 0), Point(1, 0))]
raises(NotImplementedError, lambda: e.normal_lines((x + 1, 1)))
# Properties
major = 3
minor = 1
e4 = Ellipse(p2, minor, major)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major*(1 - ecc)
assert e4.apoapsis == major*(1 + ecc)
assert e4.semilatus_rectum == major*(1 - ecc ** 2)
# independent of orientation
e4 = Ellipse(p2, major, minor)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major*(1 - ecc)
assert e4.apoapsis == major*(1 + ecc)
# Intersection
l1 = Line(Point(1, -5), Point(1, 5))
l2 = Line(Point(-5, -1), Point(5, -1))
l3 = Line(Point(-1, -1), Point(1, 1))
l4 = Line(Point(-10, 0), Point(0, 10))
pts_c1_l3 = [Point(sqrt(2)/2, sqrt(2)/2), Point(-sqrt(2)/2, -sqrt(2)/2)]
assert intersection(e2, l4) == []
assert intersection(c1, Point(1, 0)) == [Point(1, 0)]
assert intersection(c1, l1) == [Point(1, 0)]
assert intersection(c1, l2) == [Point(0, -1)]
assert intersection(c1, l3) in [pts_c1_l3, [pts_c1_l3[1], pts_c1_l3[0]]]
assert intersection(c1, c2) == [Point(0, 1), Point(1, 0)]
assert intersection(c1, c3) == [Point(sqrt(2)/2, sqrt(2)/2)]
assert e1.intersection(l1) == [Point(1, 0)]
assert e2.intersection(l4) == []
assert e1.intersection(Circle(Point(0, 2), 1)) == [Point(0, 1)]
assert e1.intersection(Circle(Point(5, 0), 1)) == []
assert e1.intersection(Ellipse(Point(2, 0), 1, 1)) == [Point(1, 0)]
assert e1.intersection(Ellipse(Point(5, 0), 1, 1)) == []
assert e1.intersection(Point(2, 0)) == []
assert e1.intersection(e1) == e1
assert intersection(Ellipse(Point(0, 0), 2, 1), Ellipse(Point(3, 0), 1, 2)) == [Point(2, 0)]
assert intersection(Circle(Point(0, 0), 2), Circle(Point(3, 0), 1)) == [Point(2, 0)]
assert intersection(Circle(Point(0, 0), 2), Circle(Point(7, 0), 1)) == []
assert intersection(Ellipse(Point(0, 0), 5, 17), Ellipse(Point(4, 0), 1, 0.2)) == [Point(5, 0)]
assert intersection(Ellipse(Point(0, 0), 5, 17), Ellipse(Point(4, 0), 0.999, 0.2)) == []
assert Circle((0, 0), S(1)/2).intersection(
Triangle((-1, 0), (1, 0), (0, 1))) == [
Point(-S(1)/2, 0), Point(S(1)/2, 0)]
raises(TypeError, lambda: intersection(e2, Line((0, 0, 0), (0, 0, 1))))
raises(TypeError, lambda: intersection(e2, Rational(12)))
# some special case intersections
csmall = Circle(p1, 3)
cbig = Circle(p1, 5)
cout = Circle(Point(5, 5), 1)
# one circle inside of another
assert csmall.intersection(cbig) == []
# separate circles
assert csmall.intersection(cout) == []
# coincident circles
assert csmall.intersection(csmall) == csmall
v = sqrt(2)
t1 = Triangle(Point(0, v), Point(0, -v), Point(v, 0))
points = intersection(t1, c1)
assert len(points) == 4
assert Point(0, 1) in points
assert Point(0, -1) in points
assert Point(v/2, v/2) in points
assert Point(v/2, -v/2) in points
circ = Circle(Point(0, 0), 5)
elip = Ellipse(Point(0, 0), 5, 20)
assert intersection(circ, elip) in \
[[Point(5, 0), Point(-5, 0)], [Point(-5, 0), Point(5, 0)]]
assert elip.tangent_lines(Point(0, 0)) == []
elip = Ellipse(Point(0, 0), 3, 2)
assert elip.tangent_lines(Point(3, 0)) == \
[Line(Point(3, 0), Point(3, -12))]
e1 = Ellipse(Point(0, 0), 5, 10)
e2 = Ellipse(Point(2, 1), 4, 8)
a = S(53)/17
c = 2*sqrt(3991)/17
ans = [Point(a - c/8, a/2 + c), Point(a + c/8, a/2 - c)]
assert e1.intersection(e2) == ans
e2 = Ellipse(Point(x, y), 4, 8)
c = sqrt(3991)
ans = [Point(-c/68 + a, 2*c/17 + a/2), Point(c/68 + a, -2*c/17 + a/2)]
assert [p.subs({x: 2, y:1}) for p in e1.intersection(e2)] == ans
# Combinations of above
assert e3.is_tangent(e3.tangent_lines(p1 + Point(y1, 0))[0])
e = Ellipse((1, 2), 3, 2)
assert e.tangent_lines(Point(10, 0)) == \
[Line(Point(10, 0), Point(1, 0)),
Line(Point(10, 0), Point(S(14)/5, S(18)/5))]
# encloses_point
e = Ellipse((0, 0), 1, 2)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(
e.center + Point(e.hradius + Rational(1, 10), 0)) is False
e = Ellipse((0, 0), 2, 1)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(
e.center + Point(e.hradius + Rational(1, 10), 0)) is False
assert c1.encloses_point(Point(1, 0)) is False
assert c1.encloses_point(Point(0.3, 0.4)) is True
assert e.scale(2, 3) == Ellipse((0, 0), 4, 3)
assert e.scale(3, 6) == Ellipse((0, 0), 6, 6)
assert e.rotate(pi) == e
assert e.rotate(pi, (1, 2)) == Ellipse(Point(2, 4), 2, 1)
raises(NotImplementedError, lambda: e.rotate(pi/3))
# Circle rotation tests (Issue #11743)
# Link - https://github.com/sympy/sympy/issues/11743
cir = Circle(Point(1, 0), 1)
assert cir.rotate(pi/2) == Circle(Point(0, 1), 1)
assert cir.rotate(pi/3) == Circle(Point(S(1)/2, sqrt(3)/2), 1)
assert cir.rotate(pi/3, Point(1, 0)) == Circle(Point(1, 0), 1)
assert cir.rotate(pi/3, Point(0, 1)) == Circle(Point(S(1)/2 + sqrt(3)/2, S(1)/2 + sqrt(3)/2), 1)
def test_plane():
x, y, z, u, v = symbols('x y z u v', real=True)
p1 = Point3D(0, 0, 0)
p2 = Point3D(1, 1, 1)
p3 = Point3D(1, 2, 3)
pl3 = Plane(p1, p2, p3)
pl4 = Plane(p1, normal_vector=(1, 1, 1))
pl4b = Plane(p1, p2)
pl5 = Plane(p3, normal_vector=(1, 2, 3))
pl6 = Plane(Point3D(2, 3, 7), normal_vector=(2, 2, 2))
pl7 = Plane(Point3D(1, -5, -6), normal_vector=(1, -2, 1))
pl8 = Plane(p1, normal_vector=(0, 0, 1))
pl9 = Plane(p1, normal_vector=(0, 12, 0))
pl10 = Plane(p1, normal_vector=(-2, 0, 0))
pl11 = Plane(p2, normal_vector=(0, 0, 1))
l1 = Line3D(Point3D(5, 0, 0), Point3D(1, -1, 1))
l2 = Line3D(Point3D(0, -2, 0), Point3D(3, 1, 1))
l3 = Line3D(Point3D(0, -1, 0), Point3D(5, -1, 9))
assert Plane(p1, p2, p3) != Plane(p1, p3, p2)
assert Plane(p1, p2, p3).is_coplanar(Plane(p1, p3, p2))
assert pl3 == Plane(Point3D(0, 0, 0), normal_vector=(1, -2, 1))
assert pl3 != pl4
assert pl4 == pl4b
assert pl5 == Plane(Point3D(1, 2, 3), normal_vector=(1, 2, 3))
assert pl5.equation(x, y, z) == x + 2*y + 3*z - 14
assert pl3.equation(x, y, z) == x - 2*y + z
assert pl3.p1 == p1
assert pl4.p1 == p1
assert pl5.p1 == p3
assert pl4.normal_vector == (1, 1, 1)
assert pl5.normal_vector == (1, 2, 3)
assert p1 in pl3
assert p1 in pl4
assert p3 in pl5
assert pl3.projection(Point(0, 0)) == p1
p = pl3.projection(Point3D(1, 1, 0))
assert p == Point3D(7/6, 2/3, 1/6)
assert p in pl3
l = pl3.projection_line(Line(Point(0, 0), Point(1, 1)))
assert l == Line3D(Point3D(0, 0, 0), Point3D(7/6, 2/3, 1/6))
assert l in pl3
# get a segment that does not intersect the plane which is also
# parallel to pl3's normal veector
t = Dummy()
r = pl3.random_point()
a = pl3.perpendicular_line(r).arbitrary_point(t)
s = Segment3D(a.subs(t, 1), a.subs(t, 2))
assert s.p1 not in pl3 and s.p2 not in pl3
assert pl3.projection_line(s).equals(r)
assert pl3.projection_line(Segment(Point(1, 0), Point(1, 1))) == \
Segment3D(Point3D(5/6, 1/3, -1/6), Point3D(7/6, 2/3, 1/6))
assert pl6.projection_line(Ray(Point(1, 0), Point(1, 1))) == \
Ray3D(Point3D(14/3, 11/3, 11/3), Point3D(13/3, 13/3, 10/3))
assert pl3.perpendicular_line(r.args) == pl3.perpendicular_line(r)
assert pl3.is_parallel(pl6) is False
assert pl4.is_parallel(pl6)
assert pl6.is_parallel(l1) is False
assert pl3.is_perpendicular(pl6)
assert pl4.is_perpendicular(pl7)
assert pl6.is_perpendicular(pl7)
assert pl6.is_perpendicular(l1) is False
assert pl6.distance(pl6.arbitrary_point(u, v)) == 0
assert pl7.distance(pl7.arbitrary_point(u, v)) == 0
assert pl6.distance(pl6.arbitrary_point(t)) == 0
assert pl7.distance(pl7.arbitrary_point(t)) == 0
assert pl6.p1.distance(pl6.arbitrary_point(t)).simplify() == 1
assert pl7.p1.distance(pl7.arbitrary_point(t)).simplify() == 1
assert pl3.arbitrary_point(t) == Point3D(-sqrt(30)*sin(t)/30 + \
2*sqrt(5)*cos(t)/5, sqrt(30)*sin(t)/15 + sqrt(5)*cos(t)/5, sqrt(30)*sin(t)/6)
assert pl3.arbitrary_point(u, v) == Point3D(2*u - v, u + 2*v, 5*v)
assert pl7.distance(Point3D(1, 3, 5)) == 5*sqrt(6)/6
assert pl6.distance(Point3D(0, 0, 0)) == 4*sqrt(3)
assert pl6.distance(pl6.p1) == 0
assert pl7.distance(pl6) == 0
assert pl7.distance(l1) == 0
assert pl6.distance(Segment3D(Point3D(2, 3, 1), Point3D(1, 3, 4))) == 0
pl6.distance(Plane(Point3D(5, 5, 5), normal_vector=(8, 8, 8))) == sqrt(3)
assert pl6.angle_between(pl3) == pi/2
assert pl6.angle_between(pl6) == 0
assert pl6.angle_between(pl4) == 0
assert pl7.angle_between(Line3D(Point3D(2, 3, 5), Point3D(2, 4, 6))) == \
-asin(sqrt(3)/6)
assert pl6.angle_between(Ray3D(Point3D(2, 4, 1), Point3D(6, 5, 3))) == \
asin(sqrt(7)/3)
assert pl7.angle_between(Segment3D(Point3D(5, 6, 1), Point3D(1, 2, 4))) == \
asin(7*sqrt(246)/246)
assert are_coplanar(l1, l2, l3) is False
assert are_coplanar(l1) is False
assert are_coplanar(Point3D(2, 7, 2), Point3D(0, 0, 2),
Point3D(1, 1, 2), Point3D(1, 2, 2))
assert are_coplanar(Plane(p1, p2, p3), Plane(p1, p3, p2))
assert Plane.are_concurrent(pl3, pl4, pl5) is False
assert Plane.are_concurrent(pl6) is False
raises(ValueError, lambda: Plane.are_concurrent(Point3D(0, 0, 0)))
raises(ValueError, lambda: Plane((1, 2, 3), normal_vector=(0, 0, 0)))
assert pl3.parallel_plane(Point3D(1, 2, 5)) == Plane(Point3D(1, 2, 5), \
normal_vector=(1, -2, 1))
# perpendicular_plane
p = Plane((0, 0, 0), (1, 0, 0))
# default
assert p.perpendicular_plane() == Plane(Point3D(0, 0, 0), (0, 1, 0))
# 1 pt
assert p.perpendicular_plane(Point3D(1, 0, 1)) == \
Plane(Point3D(1, 0, 1), (0, 1, 0))
# pts as tuples
assert p.perpendicular_plane((1, 0, 1), (1, 1, 1)) == \
Plane(Point3D(1, 0, 1), (0, 0, -1))
a, b = Point3D(0, 0, 0), Point3D(0, 1, 0)
Z = (0, 0, 1)
p = Plane(a, normal_vector=Z)
# case 4
assert p.perpendicular_plane(a, b) == Plane(a, (1, 0, 0))
n = Point3D(*Z)
# case 1
assert p.perpendicular_plane(a, n) == Plane(a, (-1, 0, 0))
# case 2
assert Plane(a, normal_vector=b.args).perpendicular_plane(a, a + b) == \
Plane(Point3D(0, 0, 0), (1, 0, 0))
# case 1&3
assert Plane(b, normal_vector=Z).perpendicular_plane(b, b + n) == \
Plane(Point3D(0, 1, 0), (-1, 0, 0))
# case 2&3
assert Plane(b, normal_vector=b.args).perpendicular_plane(n, n + b) == \
Plane(Point3D(0, 0, 1), (1, 0, 0))
assert pl6.intersection(pl6) == [pl6]
assert pl4.intersection(pl4.p1) == [pl4.p1]
assert pl3.intersection(pl6) == [
Line3D(Point3D(8, 4, 0), Point3D(2, 4, 6))]
assert pl3.intersection(Line3D(Point3D(1,2,4), Point3D(4,4,2))) == [
Point3D(2, 8/3, 10/3)]
assert pl3.intersection(Plane(Point3D(6, 0, 0), normal_vector=(2, -5, 3))
) == [Line3D(Point3D(-24, -12, 0), Point3D(-25, -13, -1))]
assert pl6.intersection(Ray3D(Point3D(2, 3, 1), Point3D(1, 3, 4))) == [
Point3D(-1, 3, 10)]
assert pl6.intersection(Segment3D(Point3D(2, 3, 1), Point3D(1, 3, 4))) == [
Point3D(-1, 3, 10)]
assert pl7.intersection(Line(Point(2, 3), Point(4, 2))) == [
Point3D(13/2, 3/4, 0)]
r = Ray(Point(2, 3), Point(4, 2))
assert Plane((1,2,0), normal_vector=(0,0,1)).intersection(r) == [
Ray3D(Point(2, 3), Point(4, 2))]
assert pl9.intersection(pl8) == [Line3D(Point3D(0, 0, 0), Point3D(12, 0, 0))]
assert pl10.intersection(pl11) == [Line3D(Point3D(0, 0, 1), Point3D(0, 2, 1))]
assert pl4.intersection(pl8) == [Line3D(Point3D(0, 0, 0), Point3D(1, -1, 0))]
assert pl11.intersection(pl8) == []
assert pl9.intersection(pl11) == [Line3D(Point3D(0, 0, 1), Point3D(12, 0, 1))]
assert pl9.intersection(pl4) == [Line3D(Point3D(0, 0, 0), Point3D(12, 0, -12))]
assert pl3.random_point() in pl3
# test geometrical entity using equals
assert pl4.intersection(pl4.p1)[0].equals(pl4.p1)
assert pl3.intersection(pl6)[0].equals(Line3D(Point3D(8, 4, 0), Point3D(2, 4, 6)))
pl8 = Plane((1, 2, 0), normal_vector=(0, 0, 1))
assert pl8.intersection(Line3D(p1, (1, 12, 0)))[0].equals(Line((0, 0, 0), (0.1, 1.2, 0)))
assert pl8.intersection(Ray3D(p1, (1, 12, 0)))[0].equals(Ray((0, 0, 0), (1, 12, 0)))
assert pl8.intersection(Segment3D(p1, (21, 1, 0)))[0].equals(Segment3D(p1, (21, 1, 0)))
assert pl8.intersection(Plane(p1, normal_vector=(0, 0, 112)))[0].equals(pl8)
assert pl8.intersection(Plane(p1, normal_vector=(0, 12, 0)))[0].equals(
Line3D(p1, direction_ratio=(112 * pi, 0, 0)))
assert pl8.intersection(Plane(p1, normal_vector=(11, 0, 1)))[0].equals(
Line3D(p1, direction_ratio=(0, -11, 0)))
assert pl8.intersection(Plane(p1, normal_vector=(1, 0, 11)))[0].equals(
Line3D(p1, direction_ratio=(0, 11, 0)))
assert pl8.intersection(Plane(p1, normal_vector=(-1, -1, -11)))[0].equals(
Line3D(p1, direction_ratio=(1, -1, 0)))
assert pl3.random_point() in pl3
assert len(pl8.intersection(Ray3D(Point3D(0, 2, 3), Point3D(1, 0, 3)))) is 0
# check if two plane are equals
assert pl6.intersection(pl6)[0].equals(pl6)
assert pl8.equals(Plane(p1, normal_vector=(0, 12, 0))) is False
assert pl8.equals(pl8)
assert pl8.equals(Plane(p1, normal_vector=(0, 0, -12)))
assert pl8.equals(Plane(p1, normal_vector=(0, 0, -12*sqrt(3))))
# issue 8570
l2 = Line3D(Point3D(S(50000004459633)/5000000000000,
-S(891926590718643)/1000000000000000,
S(231800966893633)/100000000000000),
Point3D(S(50000004459633)/50000000000000,
-S(222981647679771)/250000000000000,
S(231800966893633)/100000000000000))
p2 = Plane(Point3D(S(402775636372767)/100000000000000,
-S(97224357654973)/100000000000000,
S(216793600814789)/100000000000000),
(-S('9.00000087501922'), -S('4.81170658872543e-13'),
S('0.0')))
assert str([i.n(2) for i in p2.intersection(l2)]) == \
'[Point3D(4.0, -0.89, 2.3)]'
def set_random_direction(self):
self.direction = Ray(self.position,
(random.uniform(0, 1) + self.position[0],
random.uniform(0, 1) + self.position[1]))
def test_ellipse():
p1 = Point(0, 0)
p2 = Point(1, 1)
p4 = Point(0, 1)
e1 = Ellipse(p1, 1, 1)
e2 = Ellipse(p2, half, 1)
e3 = Ellipse(p1, y1, y1)
c1 = Circle(p1, 1)
c2 = Circle(p2, 1)
c3 = Circle(Point(sqrt(2), sqrt(2)), 1)
# Test creation with three points
cen, rad = Point(3 * half, 2), 5 * half
assert Circle(Point(0, 0), Point(3, 0), Point(0, 4)) == Circle(cen, rad)
raises(GeometryError, "Circle(Point(0,0), Point(1,1), Point(2,2))")
raises(ValueError, "Ellipse(None, None, None, 1)")
raises(GeometryError, "Circle(Point(0,0))")
# Basic Stuff
assert Ellipse(None, 1, 1).center == Point(0, 0)
assert e1 == c1
assert e1 != e2
assert p4 in e1
assert p2 not in e2
assert e1.area == pi
assert e2.area == pi / 2
assert e3.area == pi * (y1**2)
assert c1.area == e1.area
assert c1.circumference == e1.circumference
assert e3.circumference == 2 * pi * y1
assert e1.plot_interval() == e2.plot_interval() == [t, -pi, pi]
assert e1.plot_interval(x) == e2.plot_interval(x) == [x, -pi, pi]
assert Ellipse(None, 1, None, 1).circumference == 2 * pi
assert c1.minor == 1
# Private Functions
assert hash(c1) == hash(Circle(Point(1, 0), Point(0, 1), Point(0, -1)))
assert c1 in e1
assert (Line(p1, p2) in e1) == False
assert e1.__cmp__(e1) == 0
assert e1.__cmp__(Point(0, 0)) > 0
# Encloses
assert e1.encloses(Segment(Point(-0.5, -0.5), Point(0.5, 0.5))) == True
assert e1.encloses(Line(p1, p2)) == False
assert e1.encloses(Ray(p1, p2)) == False
assert e1.encloses(e1) == False
assert e1.encloses(
Polygon(Point(-0.5, -0.5), Point(-0.5, 0.5), Point(0.5, 0.5))) == True
assert e1.encloses(RegularPolygon(p1, 0.5, 3)) == True
assert e1.encloses(RegularPolygon(p1, 5, 3)) == False
assert e1.encloses(RegularPolygon(p2, 5, 3)) == False
# with generic symbols, the hradius is assumed to contain the major radius
M = Symbol('M')
m = Symbol('m')
c = Ellipse(p1, M, m).circumference
_x = c.atoms(Dummy).pop()
assert c == \
4*M*C.Integral(sqrt((1 - _x**2*(M**2 - m**2)/M**2)/(1 - _x**2)), (_x, 0, 1))
assert e2.arbitrary_point() in e2
# Foci
f1, f2 = Point(sqrt(12), 0), Point(-sqrt(12), 0)
ef = Ellipse(Point(0, 0), 4, 2)
assert ef.foci in [(f1, f2), (f2, f1)]
# Tangents
v = sqrt(2) / 2
p1_1 = Point(v, v)
p1_2 = p2 + Point(half, 0)
p1_3 = p2 + Point(0, 1)
assert e1.tangent_lines(p4) == c1.tangent_lines(p4)
assert e2.tangent_lines(p1_2) == [Line(p1_2, p2 + Point(half, 1))]
assert e2.tangent_lines(p1_3) == [Line(p1_3, p2 + Point(half, 1))]
assert c1.tangent_lines(p1_1) == [Line(p1_1, Point(0, sqrt(2)))]
assert c1.tangent_lines(p1) == []
assert e2.is_tangent(Line(p1_2, p2 + Point(half, 1)))
assert e2.is_tangent(Line(p1_3, p2 + Point(half, 1)))
assert c1.is_tangent(Line(p1_1, Point(0, sqrt(2))))
assert e1.is_tangent(Line(Point(0, 0), Point(1, 1))) == False
assert c1.is_tangent(e1) == False
assert c1.is_tangent(Ellipse(Point(2, 0), 1, 1)) == True
assert c1.is_tangent(Polygon(Point(1, 1), Point(1, -1), Point(2,
0))) == True
assert c1.is_tangent(Polygon(Point(1, 1), Point(1, 0), Point(2,
0))) == False
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(0, 0)) == \
[Line(Point(0, 0), Point(S(77)/25, S(132)/25)),
Line(Point(0, 0), Point(S(33)/5, S(22)/5))]
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(3, 4)) == \
[Line(Point(3, 4), Point(4, 4)), Line(Point(3, 4), Point(3, 5))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(3, 3)) == \
[Line(Point(3, 3), Point(4, 3)), Line(Point(3, 3), Point(3, 4))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(5 - 2*sqrt(2), 5)) == \
[Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 - sqrt(2))),
Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 + sqrt(2))),]
# Properties
major = 3
minor = 1
e4 = Ellipse(p2, minor, major)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major * (1 - ecc)
assert e4.apoapsis == major * (1 + ecc)
# independent of orientation
e4 = Ellipse(p2, major, minor)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major * (1 - ecc)
assert e4.apoapsis == major * (1 + ecc)
# Intersection
l1 = Line(Point(1, -5), Point(1, 5))
l2 = Line(Point(-5, -1), Point(5, -1))
l3 = Line(Point(-1, -1), Point(1, 1))
l4 = Line(Point(-10, 0), Point(0, 10))
pts_c1_l3 = [
Point(sqrt(2) / 2,
sqrt(2) / 2),
Point(-sqrt(2) / 2, -sqrt(2) / 2)
]
assert intersection(e2, l4) == []
assert intersection(c1, Point(1, 0)) == [Point(1, 0)]
assert intersection(c1, l1) == [Point(1, 0)]
assert intersection(c1, l2) == [Point(0, -1)]
assert intersection(c1, l3) in [pts_c1_l3, [pts_c1_l3[1], pts_c1_l3[0]]]
assert intersection(c1, c2) in [[(1, 0), (0, 1)], [(0, 1), (1, 0)]]
assert intersection(c1, c3) == [(sqrt(2) / 2, sqrt(2) / 2)]
assert e1.intersection(l1) == [Point(1, 0)]
assert e2.intersection(l4) == []
assert e1.intersection(Circle(Point(0, 2), 1)) == [Point(0, 1)]
assert e1.intersection(Circle(Point(5, 0), 1)) == []
assert e1.intersection(Ellipse(Point(2, 0), 1, 1)) == [Point(1, 0)]
assert e1.intersection(Ellipse(
Point(5, 0),
1,
1,
)) == []
assert e1.intersection(Point(2, 0)) == []
assert e1.intersection(e1) == e1
# some special case intersections
csmall = Circle(p1, 3)
cbig = Circle(p1, 5)
cout = Circle(Point(5, 5), 1)
# one circle inside of another
assert csmall.intersection(cbig) == []
# separate circles
assert csmall.intersection(cout) == []
# coincident circles
assert csmall.intersection(csmall) == csmall
v = sqrt(2)
t1 = Triangle(Point(0, v), Point(0, -v), Point(v, 0))
points = intersection(t1, c1)
assert len(points) == 4
assert Point(0, 1) in points
assert Point(0, -1) in points
assert Point(v / 2, v / 2) in points
assert Point(v / 2, -v / 2) in points
circ = Circle(Point(0, 0), 5)
elip = Ellipse(Point(0, 0), 5, 20)
assert intersection(circ, elip) in \
[[Point(5, 0), Point(-5, 0)], [Point(-5, 0), Point(5, 0)]]
assert elip.tangent_lines(Point(0, 0)) == []
elip = Ellipse(Point(0, 0), 3, 2)
assert elip.tangent_lines(Point(3,
0)) == [Line(Point(3, 0), Point(3, -12))]
e1 = Ellipse(Point(0, 0), 5, 10)
e2 = Ellipse(Point(2, 1), 4, 8)
a = S(53) / 17
c = 2 * sqrt(3991) / 17
ans = [Point(a - c / 8, a / 2 + c), Point(a + c / 8, a / 2 - c)]
assert e1.intersection(e2) == ans
e2 = Ellipse(Point(x, y), 4, 8)
ans = list(reversed(ans))
assert [p.subs({x: 2, y: 1}) for p in e1.intersection(e2)] == ans
# Combinations of above
assert e3.is_tangent(e3.tangent_lines(p1 + Point(y1, 0))[0])
e = Ellipse((1, 2), 3, 2)
assert e.tangent_lines(Point(10, 0)) == \
[Line(Point(10, 0), Point(1, 0)),
Line(Point(10, 0), Point(S(14)/5, S(18)/5))]
# encloses_point
e = Ellipse((0, 0), 1, 2)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(e.center +
Point(e.hradius + Rational(1, 10), 0)) is False
e = Ellipse((0, 0), 2, 1)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(e.center +
Point(e.hradius + Rational(1, 10), 0)) is False
assert c1.encloses_point(Point(1, 0)) is False
assert c1.encloses_point(Point(0.3, 0.4)) is True
def test_ellipse_geom():
p1 = Point(0, 0)
p2 = Point(1, 1)
p4 = Point(0, 1)
e1 = Ellipse(p1, 1, 1)
e2 = Ellipse(p2, half, 1)
e3 = Ellipse(p1, y1, y1)
c1 = Circle(p1, 1)
c2 = Circle(p2, 1)
c3 = Circle(Point(sqrt(2), sqrt(2)), 1)
# Test creation with three points
cen, rad = Point(3*half, 2), 5*half
assert Circle(Point(0, 0), Point(3, 0), Point(0, 4)) == Circle(cen, rad)
raises(
GeometryError, lambda: Circle(Point(0, 0), Point(1, 1), Point(2, 2)))
raises(ValueError, lambda: Ellipse(None, None, None, 1))
raises(GeometryError, lambda: Circle(Point(0, 0)))
# Basic Stuff
assert Ellipse(None, 1, 1).center == Point(0, 0)
assert e1 == c1
assert e1 != e2
assert p4 in e1
assert p2 not in e2
assert e1.area == pi
assert e2.area == pi/2
assert e3.area == pi*y1*abs(y1)
assert c1.area == e1.area
assert c1.circumference == e1.circumference
assert e3.circumference == 2*pi*y1
assert e1.plot_interval() == e2.plot_interval() == [t, -pi, pi]
assert e1.plot_interval(x) == e2.plot_interval(x) == [x, -pi, pi]
assert Ellipse(None, 1, None, 1).circumference == 2*pi
assert c1.minor == 1
assert c1.major == 1
assert c1.hradius == 1
assert c1.vradius == 1
# Private Functions
assert hash(c1) == hash(Circle(Point(1, 0), Point(0, 1), Point(0, -1)))
assert c1 in e1
assert (Line(p1, p2) in e1) is False
assert e1.__cmp__(e1) == 0
assert e1.__cmp__(Point(0, 0)) > 0
# Encloses
assert e1.encloses(Segment(Point(-0.5, -0.5), Point(0.5, 0.5))) is True
assert e1.encloses(Line(p1, p2)) is False
assert e1.encloses(Ray(p1, p2)) is False
assert e1.encloses(e1) is False
assert e1.encloses(
Polygon(Point(-0.5, -0.5), Point(-0.5, 0.5), Point(0.5, 0.5))) is True
assert e1.encloses(RegularPolygon(p1, 0.5, 3)) is True
assert e1.encloses(RegularPolygon(p1, 5, 3)) is False
assert e1.encloses(RegularPolygon(p2, 5, 3)) is False
# with generic symbols, the hradius is assumed to contain the major radius
M = Symbol('M')
m = Symbol('m')
c = Ellipse(p1, M, m).circumference
_x = c.atoms(Dummy).pop()
assert c == 4*M*Integral(
sqrt((1 - _x**2*(M**2 - m**2)/M**2)/(1 - _x**2)), (_x, 0, 1))
assert e2.arbitrary_point() in e2
# Foci
f1, f2 = Point(sqrt(12), 0), Point(-sqrt(12), 0)
ef = Ellipse(Point(0, 0), 4, 2)
assert ef.foci in [(f1, f2), (f2, f1)]
# Tangents
v = sqrt(2) / 2
p1_1 = Point(v, v)
p1_2 = p2 + Point(half, 0)
p1_3 = p2 + Point(0, 1)
assert e1.tangent_lines(p4) == c1.tangent_lines(p4)
assert e2.tangent_lines(p1_2) == [Line(Point(3/2, 1), Point(3/2, 1/2))]
assert e2.tangent_lines(p1_3) == [Line(Point(1, 2), Point(5/4, 2))]
assert c1.tangent_lines(p1_1) != [Line(p1_1, Point(0, sqrt(2)))]
assert c1.tangent_lines(p1) == []
assert e2.is_tangent(Line(p1_2, p2 + Point(half, 1)))
assert e2.is_tangent(Line(p1_3, p2 + Point(half, 1)))
assert c1.is_tangent(Line(p1_1, Point(0, sqrt(2))))
assert e1.is_tangent(Line(Point(0, 0), Point(1, 1))) is False
assert c1.is_tangent(e1) is False
assert c1.is_tangent(Ellipse(Point(2, 0), 1, 1)) is True
assert c1.is_tangent(
Polygon(Point(1, 1), Point(1, -1), Point(2, 0))) is True
assert c1.is_tangent(
Polygon(Point(1, 1), Point(1, 0), Point(2, 0))) is False
assert Circle(Point(5, 5), 3).is_tangent(Circle(Point(0, 5), 1)) is False
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(0, 0)) == \
[Line(Point(0, 0), Point(77/25, 132/25)),
Line(Point(0, 0), Point(33/5, 22/5))]
assert Ellipse(Point(5, 5), 2, 1).tangent_lines(Point(3, 4)) == \
[Line(Point(3, 4), Point(4, 4)), Line(Point(3, 4), Point(3, 5))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(3, 3)) == \
[Line(Point(3, 3), Point(4, 3)), Line(Point(3, 3), Point(3, 4))]
assert Circle(Point(5, 5), 2).tangent_lines(Point(5 - 2*sqrt(2), 5)) == \
[Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 - sqrt(2))),
Line(Point(5 - 2*sqrt(2), 5), Point(5 - sqrt(2), 5 + sqrt(2))), ]
e = Ellipse(Point(0, 0), 2, 1)
assert e.normal_lines(Point(0, 0)) == \
[Line(Point(0, 0), Point(0, 1)), Line(Point(0, 0), Point(1, 0))]
assert e.normal_lines(Point(1, 0)) == \
[Line(Point(0, 0), Point(1, 0))]
assert e.normal_lines((0, 1)) == \
[Line(Point(0, 0), Point(0, 1))]
assert e.normal_lines(Point(1, 1), 2) == [
Line(Point(-51/26, -1/5), Point(-25/26, 17/83)),
Line(Point(28/29, -7/8), Point(57/29, -9/2))]
# test the failure of Poly.intervals and checks a point on the boundary
p = Point(sqrt(3), S.Half)
assert p in e
assert e.normal_lines(p, 2) == [
Line(Point(-341/171, -1/13), Point(-170/171, 5/64)),
Line(Point(26/15, -1/2), Point(41/15, -43/26))]
# be sure to use the slope that isn't undefined on boundary
e = Ellipse((0, 0), 2, 2*sqrt(3)/3)
assert e.normal_lines((1, 1), 2) == [
Line(Point(-64/33, -20/71), Point(-31/33, 2/13)),
Line(Point(1, -1), Point(2, -4))]
# general ellipse fails except under certain conditions
e = Ellipse((0, 0), x, 1)
assert e.normal_lines((x + 1, 0)) == [Line(Point(0, 0), Point(1, 0))]
raises(NotImplementedError, lambda: e.normal_lines((x + 1, 1)))
# Properties
major = 3
minor = 1
e4 = Ellipse(p2, minor, major)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major*(1 - ecc)
assert e4.apoapsis == major*(1 + ecc)
# independent of orientation
e4 = Ellipse(p2, major, minor)
assert e4.focus_distance == sqrt(major**2 - minor**2)
ecc = e4.focus_distance / major
assert e4.eccentricity == ecc
assert e4.periapsis == major*(1 - ecc)
assert e4.apoapsis == major*(1 + ecc)
# Intersection
l1 = Line(Point(1, -5), Point(1, 5))
l2 = Line(Point(-5, -1), Point(5, -1))
l3 = Line(Point(-1, -1), Point(1, 1))
l4 = Line(Point(-10, 0), Point(0, 10))
pts_c1_l3 = [Point(sqrt(2)/2, sqrt(2)/2), Point(-sqrt(2)/2, -sqrt(2)/2)]
assert intersection(e2, l4) == []
assert intersection(c1, Point(1, 0)) == [Point(1, 0)]
assert intersection(c1, l1) == [Point(1, 0)]
assert intersection(c1, l2) == [Point(0, -1)]
assert intersection(c1, l3) in [pts_c1_l3, [pts_c1_l3[1], pts_c1_l3[0]]]
assert intersection(c1, c2) == [Point(0, 1), Point(1, 0)]
assert intersection(c1, c3) == [Point(sqrt(2)/2, sqrt(2)/2)]
assert e1.intersection(l1) == [Point(1, 0)]
assert e2.intersection(l4) == []
assert e1.intersection(Circle(Point(0, 2), 1)) == [Point(0, 1)]
assert e1.intersection(Circle(Point(5, 0), 1)) == []
assert e1.intersection(Ellipse(Point(2, 0), 1, 1)) == [Point(1, 0)]
assert e1.intersection(Ellipse(Point(5, 0), 1, 1,)) == []
assert e1.intersection(Point(2, 0)) == []
assert e1.intersection(e1) == e1
# some special case intersections
csmall = Circle(p1, 3)
cbig = Circle(p1, 5)
cout = Circle(Point(5, 5), 1)
# one circle inside of another
assert csmall.intersection(cbig) == []
# separate circles
assert csmall.intersection(cout) == []
# coincident circles
assert csmall.intersection(csmall) == csmall
v = sqrt(2)
t1 = Triangle(Point(0, v), Point(0, -v), Point(v, 0))
points = intersection(t1, c1)
assert len(points) == 4
assert Point(0, 1) in points
assert Point(0, -1) in points
assert Point(v/2, v/2) in points
assert Point(v/2, -v/2) in points
circ = Circle(Point(0, 0), 5)
elip = Ellipse(Point(0, 0), 5, 20)
assert intersection(circ, elip) in \
[[Point(5, 0), Point(-5, 0)], [Point(-5, 0), Point(5, 0)]]
assert elip.tangent_lines(Point(0, 0)) == []
elip = Ellipse(Point(0, 0), 3, 2)
assert elip.tangent_lines(Point(3, 0)) == \
[Line(Point(3, 0), Point(3, -12))]
e1 = Ellipse(Point(0, 0), 5, 10)
e2 = Ellipse(Point(2, 1), 4, 8)
a = 53/17
c = 2*sqrt(3991)/17
ans = [Point(a - c/8, a/2 + c), Point(a + c/8, a/2 - c)]
assert e1.intersection(e2) == ans
e2 = Ellipse(Point(x, y), 4, 8)
c = sqrt(3991)
ans = [Point(-c/68 + a, 2*c/17 + a/2), Point(c/68 + a, -2*c/17 + a/2)]
assert [p.subs({x: 2, y:1}) for p in e1.intersection(e2)] == ans
# Combinations of above
assert e3.is_tangent(e3.tangent_lines(p1 + Point(y1, 0))[0])
e = Ellipse((1, 2), 3, 2)
assert e.tangent_lines(Point(10, 0)) == \
[Line(Point(10, 0), Point(1, 0)),
Line(Point(10, 0), Point(14/5, 18/5))]
# encloses_point
e = Ellipse((0, 0), 1, 2)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(
e.center + Point(e.hradius + Rational(1, 10), 0)) is False
e = Ellipse((0, 0), 2, 1)
assert e.encloses_point(e.center)
assert e.encloses_point(e.center + Point(0, e.vradius - Rational(1, 10)))
assert e.encloses_point(e.center + Point(e.hradius - Rational(1, 10), 0))
assert e.encloses_point(e.center + Point(e.hradius, 0)) is False
assert e.encloses_point(
e.center + Point(e.hradius + Rational(1, 10), 0)) is False
assert c1.encloses_point(Point(1, 0)) is False
assert c1.encloses_point(Point(0.3, 0.4)) is True
assert e.scale(2, 3) == Ellipse((0, 0), 4, 3)
assert e.scale(3, 6) == Ellipse((0, 0), 6, 6)
assert e.rotate(pi) == e
assert e.rotate(pi, (1, 2)) == Ellipse(Point(2, 4), 2, 1)
raises(NotImplementedError, lambda: e.rotate(pi/3))
# transformations
c = Circle((1, 1), 2)
assert c.scale(-1) == Circle((-1, 1), 2)
assert c.scale(y=-1) == Circle((1, -1), 2)
assert c.scale(2) == Ellipse((2, 1), 4, 2)
def test_line():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
p5 = Point(x1, 1 + x1)
p6 = Point(1, 0)
p7 = Point(0, 1)
p8 = Point(2, 0)
p9 = Point(2, 1)
l1 = Line(p1, p2)
l2 = Line(p3, p4)
l3 = Line(p3, p5)
l4 = Line(p1, p6)
l5 = Line(p1, p7)
l6 = Line(p8, p9)
l7 = Line(p2, p9)
raises(ValueError, lambda: Line(Point(0, 0), Point(0, 0)))
# Basic stuff
assert Line((1, 1), slope=1) == Line((1, 1), (2, 2))
assert Line((1, 1), slope=oo) == Line((1, 1), (1, 2))
assert Line((1, 1), slope=-oo) == Line((1, 1), (1, 2))
raises(ValueError, lambda: Line((1, 1), 1))
assert Line(p1, p2) == Line(p2, p1)
assert l1 == l2
assert l1 != l3
assert l1.slope == 1
assert l1.length == oo
assert l3.slope == oo
assert l4.slope == 0
assert l4.coefficients == (0, 1, 0)
assert l4.equation(x=x, y=y) == y
assert l5.slope == oo
assert l5.coefficients == (1, 0, 0)
assert l5.equation() == x
assert l6.equation() == x - 2
assert l7.equation() == y - 1
assert p1 in l1 # is p1 on the line l1?
assert p1 not in l3
assert Line((-x, x), (-x + 1, x - 1)).coefficients == (1, 1, 0)
assert simplify(l1.equation()) in (x - y, y - x)
assert simplify(l3.equation()) in (x - x1, x1 - x)
assert Line(p1, p2).scale(2, 1) == Line(p1, p9)
assert l2.arbitrary_point() in l2
for ind in xrange(0, 5):
assert l3.random_point() in l3
# Orthogonality
p1_1 = Point(-x1, x1)
l1_1 = Line(p1, p1_1)
assert l1.perpendicular_line(p1) == l1_1
assert Line.is_perpendicular(l1, l1_1)
assert Line.is_perpendicular(l1, l2) == False
p = l1.random_point()
assert l1.perpendicular_segment(p) == p
# Parallelity
p2_1 = Point(-2 * x1, 0)
l2_1 = Line(p3, p5)
assert l2.parallel_line(p1_1) == Line(p2_1, p1_1)
assert l2_1.parallel_line(p1) == Line(p1, Point(0, 2))
assert Line.is_parallel(l1, l2)
assert Line.is_parallel(l2, l3) == False
assert Line.is_parallel(l2, l2.parallel_line(p1_1))
assert Line.is_parallel(l2_1, l2_1.parallel_line(p1))
# Intersection
assert intersection(l1, p1) == [p1]
assert intersection(l1, p5) == []
assert intersection(l1, l2) in [[l1], [l2]]
assert intersection(l1, l1.parallel_line(p5)) == []
# Concurrency
l3_1 = Line(Point(5, x1), Point(-Rational(3, 5), x1))
assert Line.is_concurrent(l1) == False
assert Line.is_concurrent(l1, l3)
assert Line.is_concurrent(l1, l3, l3_1)
assert Line.is_concurrent(l1, l1_1, l3) == False
# Projection
assert l2.projection(p4) == p4
assert l1.projection(p1_1) == p1
assert l3.projection(p2) == Point(x1, 1)
raises(GeometryError, lambda: Line(Point(0, 0), Point(1, 0)).projection(Circle(Point(0, 0), 1)))
# Finding angles
l1_1 = Line(p1, Point(5, 0))
assert feq(Line.angle_between(l1, l1_1).evalf(), pi.evalf() / 4)
# Testing Rays and Segments (very similar to Lines)
assert Ray((1, 1), angle=pi / 4) == Ray((1, 1), (2, 2))
assert Ray((1, 1), angle=pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=-pi / 2) == Ray((1, 1), (1, 0))
assert Ray((1, 1), angle=-3 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=5.0 * pi / 2) == Ray((1, 1), (1, 2))
assert Ray((1, 1), angle=pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=3.0 * pi) == Ray((1, 1), (0, 1))
assert Ray((1, 1), angle=4.0 * pi) == Ray((1, 1), (2, 1))
assert Ray((1, 1), angle=0) == Ray((1, 1), (2, 1))
# XXX don't know why this fails without str
assert str(Ray((1, 1), angle=4.2 * pi)) == str(Ray(Point(1, 1), Point(2, 1 + C.tan(0.2 * pi))))
assert Ray((1, 1), angle=5) == Ray((1, 1), (2, 1 + C.tan(5)))
raises(ValueError, lambda: Ray((1, 1), 1))
r1 = Ray(p1, Point(-1, 5))
r2 = Ray(p1, Point(-1, 1))
r3 = Ray(p3, p5)
r4 = Ray(p1, p2)
r5 = Ray(p2, p1)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
assert l1.projection(r1) == Ray(p1, p2)
assert l1.projection(r2) == p1
assert r3 != r1
t = Symbol("t", real=True)
assert Ray((1, 1), angle=pi / 4).arbitrary_point() == Point(1 / (1 - t), 1 / (1 - t))
s1 = Segment(p1, p2)
s2 = Segment(p1, p1_1)
assert s1.midpoint == Point(Rational(1, 2), Rational(1, 2))
assert s2.length == sqrt(2 * (x1 ** 2))
assert s1.perpendicular_bisector() == Line(Point(0, 1), Point(1, 0))
assert Segment((1, 1), (2, 3)).arbitrary_point() == Point(1 + t, 1 + 2 * t)
# intersections
assert s1.intersection(Line(p6, p9)) == []
s3 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
assert s1.intersection(s3) == [s1]
assert s3.intersection(s1) == [s3]
assert r4.intersection(s3) == [s3]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
s3 = Segment(Point(1, 1), Point(2, 2))
assert s1.intersection(s3) == [Point(1, 1)]
s3 = Segment(Point(0.5, 0.5), Point(1.5, 1.5))
assert s1.intersection(s3) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(r5) == [s1]
assert r5.intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
# Segment contains
a, b = symbols("a,b")
s = Segment((0, a), (0, b))
assert Point(0, (a + b) / 2) in s
s = Segment((a, 0), (b, 0))
assert Point((a + b) / 2, 0) in s
raises(Undecidable, lambda: Point(2 * a, 0) in s)
# Testing distance from a Segment to an object
s1 = Segment(Point(0, 0), Point(1, 1))
s2 = Segment(Point(half, half), Point(1, 0))
pt1 = Point(0, 0)
pt2 = Point(Rational(3) / 2, Rational(3) / 2)
assert s1.distance(pt1) == 0
assert s2.distance(pt1) == 2 ** (half) / 2
assert s2.distance(pt2) == 2 ** (half)
# Special cases of projection and intersection
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(2, 2), Point(0, 0))
r3 = Ray(Point(1, 1), Point(-1, -1))
r4 = Ray(Point(0, 4), Point(-1, -5))
r5 = Ray(Point(2, 2), Point(3, 3))
assert intersection(r1, r2) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, r3) == [Point(1, 1)]
assert r1.projection(r3) == Point(1, 1)
assert r1.projection(r4) == Segment(Point(1, 1), Point(2, 2))
r5 = Ray(Point(0, 0), Point(0, 1))
r6 = Ray(Point(0, 0), Point(0, 2))
assert r5 in r6
assert r6 in r5
s1 = Segment(Point(0, 0), Point(2, 2))
s2 = Segment(Point(-1, 5), Point(-5, -10))
s3 = Segment(Point(0, 4), Point(-2, 2))
assert intersection(r1, s1) == [Segment(Point(1, 1), Point(2, 2))]
assert r1.projection(s2) == Segment(Point(1, 1), Point(2, 2))
assert s3.projection(r1) == Segment(Point(0, 4), Point(-1, 3))
l1 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(0, 0), Point(3, 4))
s1 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, l1) == [l1]
assert intersection(l1, r1) == [r1]
assert intersection(l1, s1) == [s1]
assert intersection(r1, l1) == [r1]
assert intersection(s1, l1) == [s1]
entity1 = Segment(Point(-10, 10), Point(10, 10))
entity2 = Segment(Point(-5, -5), Point(-5, 5))
assert intersection(entity1, entity2) == []
r1 = Ray(p1, Point(0, 1))
r2 = Ray(Point(0, 1), p1)
r3 = Ray(p1, p2)
r4 = Ray(p2, p1)
s1 = Segment(p1, Point(0, 1))
assert Line(r1.source, r1.random_point()).slope == r1.slope
assert Line(r2.source, r2.random_point()).slope == r2.slope
assert Segment(Point(0, -1), s1.random_point()).slope == s1.slope
p_r3 = r3.random_point()
p_r4 = r4.random_point()
assert p_r3.x >= p1.x and p_r3.y >= p1.y
assert p_r4.x <= p2.x and p_r4.y <= p2.y
p10 = Point(2000, 2000)
s1 = Segment(p1, p10)
p_s1 = s1.random_point()
assert p1.x <= p_s1.x and p_s1.x <= p10.x and p1.y <= p_s1.y and p_s1.y <= p10.y
s2 = Segment(p10, p1)
assert hash(s1) == hash(s2)
p11 = p10.scale(2, 2)
assert s1.is_similar(Segment(p10, p11))
assert s1.is_similar(r1) == False
assert (r1 in s1) == False
assert Segment(p1, p2) in s1
assert s1.plot_interval() == [t, 0, 1]
assert s1 in Line(p1, p10)
assert Line(p1, p10) == Line(p10, p1)
assert Line(p1, p10) != p1
assert Line(p1, p10).plot_interval() == [t, -5, 5]
assert Ray((0, 0), angle=pi / 4).plot_interval() == [t, 0, 5 * sqrt(2) / (1 + 5 * sqrt(2))]
def test_intersection_2d():
p1 = Point(0, 0)
p2 = Point(1, 1)
p3 = Point(x1, x1)
p4 = Point(y1, y1)
l1 = Line(p1, p2)
l3 = Line(Point(0, 0), Point(3, 4))
r1 = Ray(Point(1, 1), Point(2, 2))
r2 = Ray(Point(0, 0), Point(3, 4))
r4 = Ray(p1, p2)
r6 = Ray(Point(0, 1), Point(1, 2))
r7 = Ray(Point(0.5, 0.5), Point(1, 1))
s1 = Segment(p1, p2)
s2 = Segment(Point(0.25, 0.25), Point(0.5, 0.5))
s3 = Segment(Point(0, 0), Point(3, 4))
assert intersection(l1, p1) == [p1]
assert intersection(l1, Point(x1, 1 + x1)) == []
assert intersection(l1, Line(p3, p4)) in [[l1], [Line(p3, p4)]]
assert intersection(l1, l1.parallel_line(Point(x1, 1 + x1))) == []
assert intersection(l3, l3) == [l3]
assert intersection(l3, r2) == [r2]
assert intersection(l3, s3) == [s3]
assert intersection(s3, l3) == [s3]
assert intersection(Segment(Point(-10, 10), Point(10, 10)), Segment(Point(-5, -5), Point(-5, 5))) == []
assert intersection(r2, l3) == [r2]
assert intersection(r1, Ray(Point(2, 2), Point(0, 0))) == [Segment(Point(1, 1), Point(2, 2))]
assert intersection(r1, Ray(Point(1, 1), Point(-1, -1))) == [Point(1, 1)]
assert intersection(r1, Segment(Point(0, 0), Point(2, 2))) == [Segment(Point(1, 1), Point(2, 2))]
assert r4.intersection(s2) == [s2]
assert r4.intersection(Segment(Point(2, 3), Point(3, 4))) == []
assert r4.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert r4.intersection(Ray(p2, p1)) == [s1]
assert Ray(p2, p1).intersection(r6) == []
assert r4.intersection(r7) == r7.intersection(r4) == [r7]
assert Ray3D((0, 0), (3, 0)).intersection(Ray3D((1, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray3D((1, 0), (3, 0)).intersection(Ray3D((0, 0), (3, 0))) == [Ray3D((1, 0), (3, 0))]
assert Ray(Point(0, 0), Point(0, 4)).intersection(Ray(Point(0, 1), Point(0, -1))) == \
[Segment(Point(0, 0), Point(0, 1))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((1, 0), (2, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((1, 0), (2, 0)).intersection(
Segment3D((0, 0), (3, 0))) == [Segment3D((1, 0), (2, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((3, 0), (4, 0))) == [Point3D((3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((2, 0), (5, 0))) == [Segment3D((2, 0), (3, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (1, 0))) == [Segment3D((0, 0), (1, 0))]
assert Segment3D((0, 0), (3, 0)).intersection(
Segment3D((-2, 0), (0, 0))) == [Point3D(0, 0)]
assert s1.intersection(Segment(Point(1, 1), Point(2, 2))) == [Point(1, 1)]
assert s1.intersection(Segment(Point(0.5, 0.5), Point(1.5, 1.5))) == [Segment(Point(0.5, 0.5), p2)]
assert s1.intersection(Segment(Point(4, 4), Point(5, 5))) == []
assert s1.intersection(Segment(Point(-1, -1), p1)) == [p1]
assert s1.intersection(Segment(Point(-1, -1), Point(0.5, 0.5))) == [Segment(p1, Point(0.5, 0.5))]
assert s1.intersection(Line(Point(1, 0), Point(2, 1))) == []
assert s1.intersection(s2) == [s2]
assert s2.intersection(s1) == [s2]
assert asa(120, 8, 52) == \
Triangle(
Point(0, 0),
Point(8, 0),
Point(-4 * cos(19 * pi / 90) / sin(2 * pi / 45),
4 * sqrt(3) * cos(19 * pi / 90) / sin(2 * pi / 45)))
assert Line((0, 0), (1, 1)).intersection(Ray((1, 0), (1, 2))) == [Point(1, 1)]
assert Line((0, 0), (1, 1)).intersection(Segment((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Ray((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (1, 1)).intersection(Segment((1, 0), (1, 2))) == [Point(1, 1)]
assert Ray((0, 0), (10, 10)).contains(Segment((1, 1), (2, 2))) is True
assert Segment((1, 1), (2, 2)) in Line((0, 0), (10, 10))
# 16628 - this should be fast
p0 = Point2D(S(249)/5, S(497999)/10000)
p1 = Point2D((-58977084786*sqrt(405639795226) + 2030690077184193 +
20112207807*sqrt(630547164901) + 99600*sqrt(255775022850776494562626))
/(2000*sqrt(255775022850776494562626) + 1991998000*sqrt(405639795226)
+ 1991998000*sqrt(630547164901) + 1622561172902000),
(-498000*sqrt(255775022850776494562626) - 995999*sqrt(630547164901) +
90004251917891999 +
496005510002*sqrt(405639795226))/(10000*sqrt(255775022850776494562626)
+ 9959990000*sqrt(405639795226) + 9959990000*sqrt(630547164901) +
8112805864510000))
p2 = Point2D(S(497)/10, -S(497)/10)
p3 = Point2D(-S(497)/10, -S(497)/10)
l = Line(p0, p1)
s = Segment(p2, p3)
n = (-52673223862*sqrt(405639795226) - 15764156209307469 -
9803028531*sqrt(630547164901) +
33200*sqrt(255775022850776494562626))
d = sqrt(405639795226) + 315274080450 + 498000*sqrt(
630547164901) + sqrt(255775022850776494562626)
assert intersection(l, s) == [
Point2D(n/d*S(3)/2000, -S(497)/10)]
