def setUp(self) :
self.homeDirMaster = get_new_environment_path()
self.homeDirClient = get_new_environment_path()
self.dbenvMaster = db.DBEnv()
self.dbenvClient = db.DBEnv()
# Must use "DB_THREAD" because the Replication Manager will
# be executed in other threads but will use the same environment.
# http://forums.oracle.com/forums/thread.jspa?threadID=645788&tstart=0
self.dbenvMaster.open(self.homeDirMaster, db.DB_CREATE | db.DB_INIT_TXN
| db.DB_INIT_LOG | db.DB_INIT_MPOOL | db.DB_INIT_LOCK |
db.DB_INIT_REP | db.DB_RECOVER | db.DB_THREAD, 0666)
self.dbenvClient.open(self.homeDirClient, db.DB_CREATE | db.DB_INIT_TXN
| db.DB_INIT_LOG | db.DB_INIT_MPOOL | db.DB_INIT_LOCK |
db.DB_INIT_REP | db.DB_RECOVER | db.DB_THREAD, 0666)
self.confirmed_master=self.client_startupdone=False
def confirmed_master(a,b,c) :
if b==db.DB_EVENT_REP_MASTER :
self.confirmed_master=True
def client_startupdone(a,b,c) :
if b==db.DB_EVENT_REP_STARTUPDONE :
self.client_startupdone=True
self.dbenvMaster.set_event_notify(confirmed_master)
self.dbenvClient.set_event_notify(client_startupdone)
#self.dbenvMaster.set_verbose(db.DB_VERB_REPLICATION, True)
#self.dbenvMaster.set_verbose(db.DB_VERB_FILEOPS_ALL, True)
#self.dbenvClient.set_verbose(db.DB_VERB_REPLICATION, True)
#self.dbenvClient.set_verbose(db.DB_VERB_FILEOPS_ALL, True)
self.dbMaster = self.dbClient = None
def setUp(self):
if self.useEnv:
self.homeDir = get_new_environment_path()
try:
self.env = db.DBEnv()
self.env.set_lg_max(1024 * 1024)
self.env.set_tx_max(30)
self.env.set_tx_timestamp(int(time.time()))
self.env.set_flags(self.envsetflags, 1)
self.env.open(self.homeDir, self.envflags | db.DB_CREATE)
self.filename = "test"
# Yes, a bare except is intended, since we're re-raising the exc.
except:
test_support.rmtree(self.homeDir)
raise
else:
self.env = None
self.filename = get_new_database_path()
# create and open the DB
self.d = db.DB(self.env)
self.d.set_flags(self.dbsetflags)
if self.dbname:
self.d.open(self.filename, self.dbname, self.dbtype,
self.dbopenflags | db.DB_CREATE, self.dbmode)
else:
self.d.open(
self.filename, # try out keyword args
mode=self.dbmode,
dbtype=self.dbtype,
flags=self.dbopenflags | db.DB_CREATE)
self.populateDB()
def setUp(self):
if self.useEnv:
self.homeDir = get_new_environment_path()
try:
self.env = db.DBEnv()
self.env.set_lg_max(1048576)
self.env.set_tx_max(30)
self._t = int(time.time())
self.env.set_tx_timestamp(self._t)
self.env.set_flags(self.envsetflags, 1)
self.env.open(self.homeDir, self.envflags | db.DB_CREATE)
self.filename = 'test'
except:
test_support.rmtree(self.homeDir)
raise
else:
self.env = None
self.filename = get_new_database_path()
self.d = db.DB(self.env)
if not self.useEnv:
self.d.set_cachesize(*self.cachesize)
cachesize = self.d.get_cachesize()
self.assertEqual(cachesize[0], self.cachesize[0])
self.assertEqual(cachesize[2], self.cachesize[2])
self.assertEqual(125, int(100.0 * cachesize[1] / self.cachesize[1]))
self.d.set_flags(self.dbsetflags)
if self.dbname:
self.d.open(self.filename, self.dbname, self.dbtype, self.dbopenflags | db.DB_CREATE, self.dbmode)
else:
self.d.open(self.filename, mode=self.dbmode, dbtype=self.dbtype, flags=self.dbopenflags | db.DB_CREATE)
if not self.useEnv:
self.assertRaises(db.DBInvalidArgError, self.d.set_cachesize, *self.cachesize)
self.populateDB()
return
def setUp(self):
import sys
if sys.version_info[0] >= 3:
from test_all import do_proxy_db_py3k
self._flag_proxy_db_py3k = do_proxy_db_py3k(False)
self.testHomeDir = get_new_environment_path()
self.tdb = dbtables.bsdTableDB(filename='tabletest.db', dbhome=self.testHomeDir, create=1)
def setUp(self):
self.filename = self.__class__.__name__ + '.db'
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(
self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL | db.DB_INIT_LOCK
| db.DB_THREAD | self.envFlags)
def test02_WithSource(self):
"""
A Recno file that is given a "backing source file" is essentially a
simple ASCII file. Normally each record is delimited by \n and so is
just a line in the file, but you can set a different record delimiter
if needed.
"""
homeDir = get_new_environment_path()
self.homeDir = homeDir
source = os.path.join(homeDir, "test_recno.txt")
if not os.path.isdir(homeDir):
os.mkdir(homeDir)
f = open(source, "w") # create the file
f.close()
d = db.DB()
# This is the default value, just checking if both int
d.set_re_delim(0x0A)
d.set_re_delim("\n") # and char can be used...
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO, db.DB_CREATE)
data = "The quick brown fox jumped over the lazy dog".split()
for datum in data:
d.append(datum)
d.sync()
d.close()
# get the text from the backing source
f = open(source, "r")
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print data
print text.split("\n")
self.assertEqual(text.split("\n"), data)
# open as a DB again
d = db.DB()
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO)
d[3] = "reddish-brown"
d[8] = "comatose"
d.sync()
d.close()
f = open(source, "r")
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print text.split("\n")
self.assertEqual(text.split("\n"), "The quick reddish-brown fox jumped over the comatose dog".split())
def setUp(self):
self.int_32_max = 4294967296L
self.homeDir = get_new_environment_path()
self.filename = 'test'
self.dbenv = db.DBEnv()
self.dbenv.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL, 438)
self.d = db.DB(self.dbenv)
self.d.open(self.filename, db.DB_BTREE, db.DB_CREATE, 438)
def setUp(self):
self.int_32_max = 0x100000000
self.homeDir = get_new_environment_path()
self.filename = "test"
self.dbenv = db.DBEnv()
self.dbenv.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL, 0666)
self.d = db.DB(self.dbenv)
self.d.open(self.filename, db.DB_BTREE, db.DB_CREATE, 0666)
def setUp(self):
if verbose:
dbutils._deadlock_VerboseFile = sys.stdout
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.setEnvOpts()
self.env.open(self.homeDir, self.envflags | db.DB_CREATE)
self.filename = self.__class__.__name__ + '.db'
self.d = db.DB(self.env)
if self.dbsetflags:
self.d.set_flags(self.dbsetflags)
self.d.open(self.filename, self.dbtype, self.dbopenflags | db.DB_CREATE)
def setUp(self):
self.homeDirMaster = get_new_environment_path()
self.homeDirClient = get_new_environment_path()
self.dbenvMaster = db.DBEnv()
self.dbenvClient = db.DBEnv()
self.dbenvMaster.open(self.homeDirMaster, db.DB_CREATE | db.DB_INIT_TXN | db.DB_INIT_LOG | db.DB_INIT_MPOOL | db.DB_INIT_LOCK | db.DB_INIT_REP | db.DB_RECOVER | db.DB_THREAD, 438)
self.dbenvClient.open(self.homeDirClient, db.DB_CREATE | db.DB_INIT_TXN | db.DB_INIT_LOG | db.DB_INIT_MPOOL | db.DB_INIT_LOCK | db.DB_INIT_REP | db.DB_RECOVER | db.DB_THREAD, 438)
self.confirmed_master = self.client_startupdone = False
def confirmed_master(a, b, c):
if b == db.DB_EVENT_REP_MASTER:
self.confirmed_master = True
def client_startupdone(a, b, c):
if b == db.DB_EVENT_REP_STARTUPDONE:
self.client_startupdone = True
self.dbenvMaster.set_event_notify(confirmed_master)
self.dbenvClient.set_event_notify(client_startupdone)
self.dbMaster = self.dbClient = None
return
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL)
self.primary_db = db.DB(self.env)
self.primary_db.open(self.db_name, 'primary', db.DB_BTREE, db.DB_CREATE)
self.secondary_db = db.DB(self.env)
self.secondary_db.set_flags(db.DB_DUP)
self.secondary_db.open(self.db_name, 'secondary', db.DB_BTREE, db.DB_CREATE)
self.primary_db.associate(self.secondary_db, lambda key, data: data)
self.primary_db.put('salad', 'eggs')
self.primary_db.put('spam', 'ham')
self.primary_db.put('omelet', 'eggs')
def test02_WithSource(self):
"""
A Recno file that is given a "backing source file" is essentially a
simple ASCII file. Normally each record is delimited by
and so is
just a line in the file, but you can set a different record delimiter
if needed.
"""
homeDir = get_new_environment_path()
self.homeDir = homeDir
source = os.path.join(homeDir, 'test_recno.txt')
if not os.path.isdir(homeDir):
os.mkdir(homeDir)
f = open(source, 'w')
f.close()
d = db.DB()
d.set_re_delim(10)
d.set_re_delim('\n')
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO, db.DB_CREATE)
data = 'The quick brown fox jumped over the lazy dog'.split()
for datum in data:
d.append(datum)
d.sync()
d.close()
f = open(source, 'r')
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print data
print text.split('\n')
self.assertEqual(text.split('\n'), data)
d = db.DB()
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO)
d[3] = 'reddish-brown'
d[8] = 'comatose'
d.sync()
d.close()
f = open(source, 'r')
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print text.split('\n')
self.assertEqual(text.split('\n'), 'The quick reddish-brown fox jumped over the comatose dog'.split())
def setUp(self):
if self.useEnv:
self.homeDir=get_new_environment_path()
try:
self.env = db.DBEnv()
self.env.set_lg_max(1024*1024)
self.env.set_tx_max(30)
self._t = int(time.time())
self.env.set_tx_timestamp(self._t)
self.env.set_flags(self.envsetflags, 1)
self.env.open(self.homeDir, self.envflags | db.DB_CREATE)
self.filename = "test"
# Yes, a bare except is intended, since we're re-raising the exc.
except:
test_support.rmtree(self.homeDir)
raise
else:
self.env = None
self.filename = get_new_database_path()
# create and open the DB
self.d = db.DB(self.env)
if not self.useEnv :
if db.version() >= (4, 2) :
self.d.set_cachesize(*self.cachesize)
cachesize = self.d.get_cachesize()
self.assertEqual(cachesize[0], self.cachesize[0])
self.assertEqual(cachesize[2], self.cachesize[2])
# Berkeley DB expands the cache 25% accounting overhead,
# if the cache is small.
self.assertEqual(125, int(100.0*cachesize[1]/self.cachesize[1]))
self.d.set_flags(self.dbsetflags)
if self.dbname:
self.d.open(self.filename, self.dbname, self.dbtype,
self.dbopenflags|db.DB_CREATE, self.dbmode)
else:
self.d.open(self.filename, # try out keyword args
mode = self.dbmode,
dbtype = self.dbtype,
flags = self.dbopenflags|db.DB_CREATE)
if not self.useEnv:
self.assertRaises(db.DBInvalidArgError,
self.d.set_cachesize, *self.cachesize)
self.populateDB()
def setUp(self):
self.db_path_1 = get_new_database_path()
self.db_path_2 = get_new_database_path()
self.db_env_path = get_new_environment_path()
def setUp(self):
self.homeDir = get_new_environment_path()
self.filename = "test"
def setUp(self):
self.homeDir = get_new_environment_path()
def setUp(self):
self.homeDir = get_new_environment_path()
self.filename = "test"
def setUp(self):
self.filename = get_new_database_path()
self.homeDir = get_new_environment_path()
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
def setUp(self):
self.filename = get_new_database_path()
self.homeDir = get_new_environment_path()
def test02_WithSource(self):
"""
A Recno file that is given a "backing source file" is essentially a
simple ASCII file. Normally each record is delimited by \n and so is
just a line in the file, but you can set a different record delimiter
if needed.
"""
homeDir = get_new_environment_path()
self.homeDir = homeDir
source = os.path.join(homeDir, 'test_recno.txt')
if not os.path.isdir(homeDir):
os.mkdir(homeDir)
f = open(source, 'w') # create the file
f.close()
d = db.DB()
# This is the default value, just checking if both int
d.set_re_delim(0x0A)
d.set_re_delim('\n') # and char can be used...
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO, db.DB_CREATE)
data = "The quick brown fox jumped over the lazy dog".split()
for datum in data:
d.append(datum)
d.sync()
d.close()
# get the text from the backing source
f = open(source, 'r')
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print data
print text.split('\n')
self.assertEqual(text.split('\n'), data)
# open as a DB again
d = db.DB()
d.set_re_source(source)
d.open(self.filename, db.DB_RECNO)
d[3] = 'reddish-brown'
d[8] = 'comatose'
d.sync()
d.close()
f = open(source, 'r')
text = f.read()
f.close()
text = text.strip()
if verbose:
print text
print text.split('\n')
self.assertEqual(
text.split('\n'),
"The quick reddish-brown fox jumped over the comatose dog".split())
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_THREAD | db.DB_INIT_MPOOL | db.DB_INIT_LOCK | db.DB_CREATE)
def setUp(self):
self.homeDir = get_new_environment_path()
def setUp(self) :
self.homeDir = get_new_environment_path()
DBShelveTestCase.setUp(self)
def setUp(self):
self.homeDir = get_new_environment_path()
DBShelveTestCase.setUp(self)
def setUp(self):
self.filename = self.__class__.__name__ + ".db"
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL)
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_THREAD | db.DB_INIT_MPOOL |
db.DB_INIT_LOCK | db.DB_CREATE)
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL | db.DB_INIT_LOG | db.DB_INIT_TXN)
self.db = db.DB(self.env)
def setUp(self):
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
def setUp(self):
self.filename = self.__class__.__name__ + '.db'
self.homeDir = get_new_environment_path()
self.env = db.DBEnv()
self.env.open(self.homeDir, db.DB_CREATE | db.DB_INIT_MPOOL)
def setUp(self):
self.filename = self.__class__.__name__ + '.db'
self.homeDir = get_new_environment_path()
def setUp(self):
self.homeDir = get_new_environment_path()
self.filename = "test"
return self._create_env(must_open_db=True)
def setUp(self) :
self.homeDir = get_new_environment_path()
self.filename = "test"
return self._create_env(must_open_db=True)
def setUp(self):
self.db_path_1 = get_new_database_path()
self.db_path_2 = get_new_database_path()
self.db_env_path = get_new_environment_path()