コード例 #1
0
    def test_subscribe_single_resource_multiple_changes(self):
        # test that we can subscribe to multiple changes of value on a specified resource
        num_changes = 2
        # open client subscribe subprocess. Wait for multiple changes to the resource
        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount %d --waitTime 5 /3/0/0" %
            (port, num_changes))

        time.sleep(0.25)
        # wait for subscribe process to start up
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/0 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for %d notifications over 5 seconds:\n" % (num_changes, ))

        # send the first set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/0=1")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # wait until we have received a notify before sending the second change
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Notify 1:\n")
        result = client_set(self.config, "/3/0/0=2")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Changed: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: 1\nNotify 2:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: 2\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #2
0
    def subscribe_resource(self, path, value, expectedResponse):
        resourcePath = "/".join(path.split("/")[0:4])
        # test that we can subscribe to a single change of value on a specified resource
        # open client subscribe subprocess. Only wait for a single change to the resource
        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                    "--verbose --ipcPort %i --waitCount 1 --waitTime 5 %s" % (port, resourcePath,))
        
        # wait for subscribe process to start up
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe %s Change\n" % (resourcePath, ))
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for 1 notifications over 5 seconds:\n")
        
        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0
        
        result = client_set(self.config, "%s=%s" % (path, value))
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        #Notify 1:\n    Manufacturer[3/0/0]: abc\nUnsubscribe /3/0/0\n
        # read subscribe output
        expectedStdout = expectedResponse
        expectedStderr = ""
        expectedCode = 0
        
        result = tools_common.non_blocking_get_run_result(subscribeProcess)
        
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #3
0
    def test_set_read_only_resource(self):
        # test that we should still be able to set a read only resource (client should have permission to do anything)
        customObjects = (CustomObject(
            "Object1001", 1001, False, "single", (CustomResource(
                "Resource100", 100, "string", "single", "optional", "r"), )), )
        params = tools_common.create_define_command(customObjects)
        result = client_define(self.config, *params)
        self.assertEqual(0, result.code)

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        # set a read only object
        result = client_set(
            self.config,
            "--create /1001/0 --create /1001/0/100 /1001/0/100=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Object1001[/1001/0]:\n    Resource100[/1001/0/100]: abc\n"
        expectedStderr = ""
        expectedCode = 0

        # check that the value was set correctly
        result = client_get(self.config, "/1001/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #4
0
 def test_set_get_invalid_value(self):
     # set MemoryFree (int) as string value. Currently will set the value to 0
     expectedStdout = "Device[/3/0]:\n    MemoryFree[/3/0/10]: 15\n"
     expectedStderr = ""
     expectedCode = 0
     
     result = client_get(self.config, "/3/0/10")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     result = client_set(self.config, "/3/0/10=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = "Device[/3/0]:\n    MemoryFree[/3/0/10]: 0\n"
     expectedStderr = ""
     expectedCode = 0
     
     result = client_get(self.config, "/3/0/10")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #5
0
 def test_set_read_only_resource(self):
     # test that we should still be able to set a read only resource (client should have permission to do anything)
     customObjects = (
         CustomObject("Object1001", 1001, False, "single", (
                 CustomResource("Resource100", 100, "string",  "single", "optional", "r"),
         )),
     )
     params = tools_common.create_define_command(customObjects)
     result = client_define(self.config, *params)
     self.assertEqual(0, result.code)
     
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     # set a read only object
     result = client_set(self.config, "--create /1001/0 --create /1001/0/100 /1001/0/100=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = "Object1001[/1001/0]:\n    Resource100[/1001/0/100]: abc\n"
     expectedStderr = ""
     expectedCode = 0
     
     # check that the value was set correctly
     result = client_get(self.config, "/1001/0/100")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #6
0
    def test_set_get_invalid_value(self):
        # set MemoryFree (int) as string value. Currently will set the value to 0
        expectedStdout = "Device[/3/0]:\n    MemoryFree[/3/0/10]: 15\n"
        expectedStderr = ""
        expectedCode = 0

        result = client_get(self.config, "/3/0/10")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/10=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Device[/3/0]:\n    MemoryFree[/3/0/10]: 0\n"
        expectedStderr = ""
        expectedCode = 0

        result = client_get(self.config, "/3/0/10")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #7
0
 def test_set_multiple_instances_on_single_instance_resource(self):
     #test that we can't set multiple resource instances on a single instance resource
     expectedStdout = ""
     expectedStderr = "Error: resource /1000/0/100 is not an array; do not specify a resource instance ID\n"
     expectedCode = 0
     
     result = client_set(self.config, "/1000/0/100/0=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = ""
     expectedStderr = "Error: resource /1000/0/100 is not an array; do not specify a resource instance ID\n"
     expectedCode = 0
     
     result = client_set(self.config, "/1000/0/100/1=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #8
0
 def test_set_multiple_instances_on_single_instance_object(self):
     #test that we can't create multiple object instances on a single instance object
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     result = client_set(self.config, "/1000/0/100=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = ""
     expectedStderr = "AwaClientSetOperation_Perform failed\nFailed to set on path /1000/1: AwaError_CannotCreate\n"
     expectedCode = 1
     
     result = client_set(self.config, "--create /1000/1")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #9
0
    def test_set_get_multiple_resources_different_instances(self):
        # test that multiple resources from different instances can be set and retrieved with a single command
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        expectedStdout = \
"""Device[/3/0]:
    Manufacturer[/3/0/0]: %s
Object1000[/1000/0]:
    Resource100[/1000/0/100]: %s
""" % (manufacturer, modelNumber)
        expectedStderr = ""
        expectedCode = 0

        client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer,), "/1000/0/100=\"%s\"" % (modelNumber,))

        result = client_get(self.config, "/3/0/0", "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #10
0
    def test_set_multiple_instances_on_single_instance_object(self):
        #test that we can't create multiple object instances on a single instance object
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = ""
        expectedStderr = "AwaClientSetOperation_Perform failed\nFailed to set on path /1000/1: AwaError_CannotCreate\n"
        expectedCode = 1

        result = client_set(self.config, "--create /1000/1")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #11
0
    def test_set_multiple_instances_on_single_instance_resource(self):
        #test that we can't set multiple resource instances on a single instance resource
        expectedStdout = ""
        expectedStderr = "Error: resource /1000/0/100 is not an array; do not specify a resource instance ID\n"
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = ""
        expectedStderr = "Error: resource /1000/0/100 is not an array; do not specify a resource instance ID\n"
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100/1=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #12
0
    def test_new_object_no_resource(self):
        # test a get on a new object with one instance created, but no optional resource created

        customObjects = (CustomObject(
            "Object1001", 1001, False, "single",
            (CustomResource("Resource100", 100, "string", "single", "optional",
                            "rw"), )), )
        params = tools_common.create_define_command(customObjects)
        client_define(self.config, *params)

        client_set(self.config, "--create /1001/0")

        expectedStdout = "Object1001[/1001/0]:\n    No resources\n"
        expectedStderr = ""
        expectedCode = 0
        result = client_get(self.config, "/1001/0")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #13
0
 def test_subscribe_single_resource_multiple_changes(self):
     # test that we can subscribe to multiple changes of value on a specified resource
     num_changes = 2;
     # open client subscribe subprocess. Wait for multiple changes to the resource
     port = self.config.clientIpcPort
     subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                 "--verbose --ipcPort %i --waitCount %d --waitTime 5 /3/0/0" % (port, num_changes))
     
     time.sleep(0.25)
     # wait for subscribe process to start up
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/0 Change\n")
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for %d notifications over 5 seconds:\n" % (num_changes,))
     
     # send the first set command
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     result = client_set(self.config, "/3/0/0=1")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     # wait until we have received a notify before sending the second change
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Notify 1:\n")
     result = client_set(self.config, "/3/0/0=2")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     # read subscribe output
     expectedStdout = "Changed: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: 1\nNotify 2:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: 2\nSession disconnected\n"
     expectedStderr = ""
     expectedCode = 0
     
     result = tools_common.non_blocking_get_run_result(subscribeProcess)
     
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #14
0
    def test_set_single_resource_none_executable(self):
        # test that a single none resource (executable) cannot be set
        value = 12345
        expectedStdout = ""
        expectedStderr = "Resource /1000/0/107 is of type None and cannot be set\n"
        expectedCode = 0

        result = client_set(self.config, "/1000/0/107=%d" % (value, ))
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #15
0
    def test_new_object_no_resource(self):
        # test a get on a new object with one instance created, but no optional resource created

        customObjects = (
            CustomObject("Object1001", 1001, False, "single", (
                CustomResource("Resource100", 100, "string",  "single", "optional", "rw"),
            )),
        )
        params = tools_common.create_define_command(customObjects)
        client_define(self.config, *params)

        client_set(self.config, "--create /1001/0")

        expectedStdout = "Object1001[/1001/0]:\n    No resources\n"
        expectedStderr = ""
        expectedCode = 0
        result = client_get(self.config, "/1001/0")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode,   result.code)
コード例 #16
0
    def test_set_get_multiple_resources_different_instances(self):
        # test that multiple resources from different instances can be set and retrieved with a single command
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        expectedStdout = \
"""Device[/3/0]:
    Manufacturer[/3/0/0]: %s
Object1000[/1000/0]:
    Resource100[/1000/0/100]: %s
""" % (manufacturer, modelNumber)
        expectedStderr = ""
        expectedCode = 0

        client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer, ),
                   "/1000/0/100=\"%s\"" % (modelNumber, ))

        result = client_get(self.config, "/3/0/0", "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #17
0
    def test_set_single_resource_none_executable(self):
        # test that a single none resource (executable) cannot be set
        value = 12345
        expectedStdout = ""
        expectedStderr = "Resource /1000/0/107 is of type None and cannot be set\n"
        expectedCode = 0

        result = client_set(self.config, "/1000/0/107=%d" % (value,))
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #18
0
    def test_server_observe_resource_client_set(self):
        # test that the server can observe changes to a resource and receive a notification
        # when that resource is changed by the client through the set function

        # open client subscribe subprocess. Only wait for a single execute of the resource
        port = self.config.serverIpcPort
        clientEndpointName = self.config.clientEndpointName
        observeProcess = tools_common.run_non_blocking(
            tools_common.SERVER_OBSERVE,
            "--verbose --ipcPort %i --clientID %s --waitCount 1 /3/0/1" %
            (port, clientEndpointName))

        # wait for observe process to start up
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Observe /3/0/1\n")
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Waiting for 1 notifications:\n")
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Notify 0 from clientID TestClient:\n")
        self.assertEqual(
            tools_common.strip_prefix(observeProcess.stdout.readline()),
            "Changed: /3/0/1 Resource Modified:\n")

        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/1=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Device[/3/0]:\n    ModelNumber[/3/0/1]: Awa Client\nNotify 1 from clientID TestClient:\nChanged: /3/0/1 Resource Modified:\nDevice[/3/0]:\n    ModelNumber[/3/0/1]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(observeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #19
0
    def test_set_get_single_resource_time(self):
        # test that a single time resource (64 bit integer) can be set and retrieved
        value = 1442972971
        expectedStdout = "Object1000[/1000/0]:\n    Resource104[/1000/0/104]: %d\n" % (value,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/104=%d" % (value,))
        self.assertEqual(expectedCode, result.code)
        
        result = client_get(self.config, "/1000/0/104")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #20
0
    def test_set_get_single_resource_string(self):
        # test that a single string resource can be set and retrieved
        manufacturer = "ACME Corp."
        expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: %s\n" % (manufacturer,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100=\"%s\"" % (manufacturer,))
        self.assertEqual(expectedCode, result.code)
        
        result = client_get(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #21
0
    def test_client_set_server_read_single_resource(self):
        # test that a single resource can be written on the client and retrieved on the server
        manufacturer = "ACME Corp."
        expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: %s\n" % (manufacturer,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100=\"%s\"" % (manufacturer,))
        self.assertEqual(0, result.code)

        result = server_read(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode,   result.code)
コード例 #22
0
    def test_set_get_single_resource_integer(self):
        # test that a single integer resource can be set and retrieved
        value = 3
        expectedStdout = "Object1000[/1000/0]:\n    Resource101[/1000/0/101]: %d\n" % (value,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "--verbose /1000/0/101=%i" % (value,))
        self.assertEqual(expectedCode, result.code)
        
        result = client_get(self.config, "/1000/0/101")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #23
0
    def test_set_get_single_resource_float(self):
        # test that a single float resource can be set and retrieved
        value = 3.5
        expectedStdout = "Object1000[/1000/0]:\n    Resource102[/1000/0/102]: %g\n" % (value,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/102=%f" % (value,))
        self.assertEqual(expectedCode, result.code)
        
        result = client_get(self.config, "/1000/0/102")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #24
0
    def test_subscribe_multiple_resources_multiple_changes(self):
        # test that we can subscribe to a single change of value on
        # one of the multiple resources specified

        # open client subscribe subprocess. Only wait for a single change to one of the resources
        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0 /3/0/1" %
            (port, ))
        # wait for subscribe process to start up

        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/0 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/1 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for 1 notifications over 5 seconds:\n")

        # do set command and expect notifications from the subscribe subprocess
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        # set the first resource
        result = client_set(self.config, "/3/0/0=abc /3/0/1=def")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nNotify 2:\nChanged: /3/0/1 Resource Modified:\nDevice[/3/0]:\n    ModelNumber[/3/0/1]: def\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #25
0
    def test_set_get_single_resource_time(self):
        # test that a single time resource (64 bit integer) can be set and retrieved
        value = 1442972971
        expectedStdout = "Object1000[/1000/0]:\n    Resource104[/1000/0/104]: %d\n" % (
            value, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/104=%d" % (value, ))
        self.assertEqual(expectedCode, result.code)

        result = client_get(self.config, "/1000/0/104")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #26
0
    def test_set_get_single_resource_float(self):
        # test that a single float resource can be set and retrieved
        value = 3.5
        expectedStdout = "Object1000[/1000/0]:\n    Resource102[/1000/0/102]: %g\n" % (
            value, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/102=%f" % (value, ))
        self.assertEqual(expectedCode, result.code)

        result = client_get(self.config, "/1000/0/102")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #27
0
    def test_set_get_single_resource_objlink(self):
        # test that a single object link resource can be set and retrieved
        link = "/3/0"

        result = client_set(self.config, "/1000/0/106=\"%s\"" % (link,))
        self.assertEqual(0, result.code)
        
        expectedStdout = "Object1000[/1000/0]:\n    Resource106[/1000/0/106]: ObjectLink[%s]\n" % (link.strip('/').replace('/', ':'))
        expectedStderr = ""
        expectedCode = 0
        
        result = client_get(self.config, "/1000/0/106")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #28
0
    def test_subscribe_resource_single_change(self):
        # test that we can subscribe to a single change of value on a specified resource

        # open client subscribe subprocess. Only wait for a single change to the resource

        #import pdb; pdb.set_trace()

        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" %
            (port, ))

        # wait for subscribe process to start up
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/0 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for 1 notifications over 5 seconds:\n")

        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #29
0
    def subscribe_resource(self, path, value, expectedResponse):
        resourcePath = "/".join(path.split("/")[0:4])
        # test that we can subscribe to a single change of value on a specified resource
        # open client subscribe subprocess. Only wait for a single change to the resource
        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount 1 --waitTime 5 %s" % (
                port,
                resourcePath,
            ))

        # wait for subscribe process to start up
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe %s Change\n" % (resourcePath, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for 1 notifications over 5 seconds:\n")

        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "%s=%s" % (path, value))
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        #Notify 1:\n    Manufacturer[3/0/0]: abc\nUnsubscribe /3/0/0\n
        # read subscribe output
        expectedStdout = expectedResponse
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #30
0
    def test_set_get_single_resource_objlink(self):
        # test that a single object link resource can be set and retrieved
        link = "/3/0"

        result = client_set(self.config, "/1000/0/106=\"%s\"" % (link, ))
        self.assertEqual(0, result.code)

        expectedStdout = "Object1000[/1000/0]:\n    Resource106[/1000/0/106]: ObjectLink[%s]\n" % (
            link.strip('/').replace('/', ':'))
        expectedStderr = ""
        expectedCode = 0

        result = client_get(self.config, "/1000/0/106")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #31
0
    def test_set_get_single_resource_string(self):
        # test that a single string resource can be set and retrieved
        manufacturer = "ACME Corp."
        expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: %s\n" % (
            manufacturer, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config,
                            "/1000/0/100=\"%s\"" % (manufacturer, ))
        self.assertEqual(expectedCode, result.code)

        result = client_get(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #32
0
    def test_set_get_single_resource_integer(self):
        # test that a single integer resource can be set and retrieved
        value = 3
        expectedStdout = "Object1000[/1000/0]:\n    Resource101[/1000/0/101]: %d\n" % (
            value, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config,
                            "--verbose /1000/0/101=%i" % (value, ))
        self.assertEqual(expectedCode, result.code)

        result = client_get(self.config, "/1000/0/101")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #33
0
    def test_client_set_server_read_single_resource(self):
        # test that a single resource can be written on the client and retrieved on the server
        manufacturer = "ACME Corp."
        expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: %s\n" % (
            manufacturer, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config,
                            "/1000/0/100=\"%s\"" % (manufacturer, ))
        self.assertEqual(0, result.code)

        result = server_read(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #34
0
 def test_set_get_single_resource_boolean_numbers(self):
     # test correct values for setting boolean resource with integers: 0,1,2 (False,True,True)
     for value in range(3):
         expectedStdout = ""
         expectedStderr = ""
         expectedCode = 0
 
         result = client_set(self.config, "/1000/0/103=%d" % (value,))
 
         self.assertEqual(expectedStdout, result.stdout)
         self.assertEqual(expectedStderr, result.stderr)
         self.assertEqual(expectedCode, result.code)
         
         expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: %r\n" % (bool(value),)
         #print "Boolean expectedStdout: %s" % (expectedStdout,)
         result = client_get(self.config, "/1000/0/103")
         self.assertEqual(expectedStdout, result.stdout)
         self.assertEqual(expectedStderr, result.stderr)
         self.assertEqual(expectedCode, result.code)
コード例 #35
0
    def test_set_get_single_resource_boolean_numbers(self):
        # test correct values for setting boolean resource with integers: 0,1,2 (False,True,True)
        for value in range(3):
            expectedStdout = ""
            expectedStderr = ""
            expectedCode = 0

            result = client_set(self.config, "/1000/0/103=%d" % (value, ))

            self.assertEqual(expectedStdout, result.stdout)
            self.assertEqual(expectedStderr, result.stderr)
            self.assertEqual(expectedCode, result.code)

            expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: %r\n" % (
                bool(value), )
            #print "Boolean expectedStdout: %s" % (expectedStdout,)
            result = client_get(self.config, "/1000/0/103")
            self.assertEqual(expectedStdout, result.stdout)
            self.assertEqual(expectedStderr, result.stderr)
            self.assertEqual(expectedCode, result.code)
コード例 #36
0
    def test_set_get_single_resource_boolean_false(self):
        # test that a single boolean resource can be set and retrieved
        value = False

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/103=%r" % (value,))

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
        
        expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: %r\n" % (value,)
        
        result = client_get(self.config, "/1000/0/103")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #37
0
    def test_set_get_single_resource_boolean_true(self):
        # test that a single boolean resource can be set and retrieved
        value = True

        expectedStdout = "Session IPC configured for UDP: address 127.0.0.1, port %d\nSession connected\nSet Boolean /1000/0/103 <- True\nSet operation completed successfully.\nSession disconnected\n" % (self.config.clientIpcPort,)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "--verbose /1000/0/103=%r" % (value,))

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
        
        expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: True\n"
        
        result = client_get(self.config, "/1000/0/103")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #38
0
    def test_set_get_single_resource_boolean_false(self):
        # test that a single boolean resource can be set and retrieved
        value = False

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/103=%r" % (value, ))

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: %r\n" % (
            value, )

        result = client_get(self.config, "/1000/0/103")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #39
0
    def test_client_set_server_read_multiple_resources_different_instances_single_read_operation(self):
        # test that multiple resources from the different instances can be set on
        # the client and retrieved on the server with single commands
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        expectedStdout = \
"""    Manufacturer[3/0/0]: %s
    Resource100[1000/0/100]: %s
""" % (manufacturer, modelNumber)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer,), "/1000/0/100=\"%s\"" % (modelNumber,))
        self.assertEqual("", result.stdout)
        self.assertEqual("", result.stderr)
        self.assertEqual(0, result.code)

        result = server_read(self.config, "/3/0/0", "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #40
0
    def test_client_set_server_read_multiple_resources_same_instance(self):
        # test that multiple resources from the same instance can be set on
        # the client and retrieved on the server with single commands
        manufacturer = "ACME Corp."
        memoryFree = 55
        temperature = 24.6
        expectedStdout = \
"""    Manufacturer[1000/0/100]: %s
    ModelNumber[1000/0/101]: %s
    MemoryFree[1000/0/102]: %d
""" % (manufacturer, memoryFree, temperature)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100=\"%s\"" % (manufacturer,),
                     "/1000/0/101=\"%d\"" % (memoryFree,),
                     "/1000/0/102=%f" % (temperature,))
        
        result = server_read(self.config, "/1000/0/100", "/1000/0/101", "/1000/0/102")
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedCode, result.code)
コード例 #41
0
    def test_set_get_single_resource_boolean_true(self):
        # test that a single boolean resource can be set and retrieved
        value = True

        expectedStdout = "Session IPC configured for UDP: address 127.0.0.1, port %d\nSession connected\nSet Boolean /1000/0/103 <- True\nSet operation completed successfully.\nSession disconnected\n" % (
            self.config.clientIpcPort, )
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config,
                            "--verbose /1000/0/103=%r" % (value, ))

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Object1000[/1000/0]:\n    Resource103[/1000/0/103]: True\n"

        result = client_get(self.config, "/1000/0/103")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #42
0
    def test_server_observe_resource_client_set(self):
        # test that the server can observe changes to a resource and receive a notification
        # when that resource is changed by the client through the set function

        # open client subscribe subprocess. Only wait for a single execute of the resource
        port = self.config.serverIpcPort
        clientEndpointName = self.config.clientEndpointName
        observeProcess = tools_common.run_non_blocking(tools_common.SERVER_OBSERVE,
                                                    "--verbose --ipcPort %i --clientID %s --waitCount 1 /3/0/1" % (port, clientEndpointName))

        # wait for observe process to start up
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Session connected")
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Observe /3/0/1\n")
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Waiting for 1 notifications:\n")
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Notify 0 from clientID TestClient:\n")
        self.assertEqual(tools_common.strip_prefix(observeProcess.stdout.readline()), "Changed: /3/0/1 Resource Modified:\n")

        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/1=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode,   result.code)

        # read subscribe output
        expectedStdout = "Device[/3/0]:\n    ModelNumber[/3/0/1]: Awa Client\nNotify 1 from clientID TestClient:\nChanged: /3/0/1 Resource Modified:\nDevice[/3/0]:\n    ModelNumber[/3/0/1]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(observeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode,   result.code)
コード例 #43
0
    def test_client_set_server_read_multiple_resources_different_instances_single_read_operation(
            self):
        # test that multiple resources from the different instances can be set on
        # the client and retrieved on the server with single commands
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        expectedStdout = \
"""    Manufacturer[3/0/0]: %s
    Resource100[1000/0/100]: %s
""" % (manufacturer, modelNumber)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer, ),
                            "/1000/0/100=\"%s\"" % (modelNumber, ))
        self.assertEqual("", result.stdout)
        self.assertEqual("", result.stderr)
        self.assertEqual(0, result.code)

        result = server_read(self.config, "/3/0/0", "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #44
0
 def test_set_get_delete_get(self):
     # test that we can no longer get the value of a resource after it has been deleted
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     result = client_set(self.config, "/1000/0/100=abc")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: abc\n"
     expectedStderr = ""
     expectedCode = 0
     
     result = client_get(self.config, "/1000/0/100")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     result = client_delete(self.config, "/1000/0/100")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = ""
     expectedStderr = "AwaClientGetOperation_Perform failed\nFailed to retrieve /1000/0/100: AwaError_PathNotFound\n"
     expectedCode = 1
     
     result = client_get(self.config, "/1000/0/100")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #45
0
    def test_set_get_delete_get(self):
        # test that we can no longer get the value of a resource after it has been deleted
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/1000/0/100=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = "Object1000[/1000/0]:\n    Resource100[/1000/0/100]: abc\n"
        expectedStderr = ""
        expectedCode = 0

        result = client_get(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_delete(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        expectedStdout = ""
        expectedStderr = "AwaClientGetOperation_Perform failed\nFailed to retrieve /1000/0/100: AwaError_PathNotFound\n"
        expectedCode = 1

        result = client_get(self.config, "/1000/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #46
0
    def test_subscribe_resource_single_change(self):
        # test that we can subscribe to a single change of value on a specified resource
        
        # open client subscribe subprocess. Only wait for a single change to the resource
        
        #import pdb; pdb.set_trace()
        
        port = self.config.clientIpcPort
        subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                    "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" % (port,))
        
        # wait for subscribe process to start up
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/0 Change\n")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for 1 notifications over 5 seconds:\n")
        
        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0
        
        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0
        
        result = tools_common.non_blocking_get_run_result(subscribeProcess)
        
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #47
0
    def test_client_set_server_read_multiple_resources_same_instance(self):
        # test that multiple resources from the same instance can be set on
        # the client and retrieved on the server with single commands
        manufacturer = "ACME Corp."
        memoryFree = 55
        temperature = 24.6
        expectedStdout = \
"""    Manufacturer[1000/0/100]: %s
    ModelNumber[1000/0/101]: %s
    MemoryFree[1000/0/102]: %d
""" % (manufacturer, memoryFree, temperature)
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config,
                            "/1000/0/100=\"%s\"" % (manufacturer, ),
                            "/1000/0/101=\"%d\"" % (memoryFree, ),
                            "/1000/0/102=%f" % (temperature, ))

        result = server_read(self.config, "/1000/0/100", "/1000/0/101",
                             "/1000/0/102")
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedCode, result.code)
コード例 #48
0
 def test_get_write_only_resource(self):
     # test that we can read from a write only resource - client should have power to do anything
     customObjects = (
         CustomObject("Object1001", 1001, False, "single", (
                 CustomResource("Resource100", 100, "string",  "single", "optional", "w"),
         )),
     )
     
     #define and set the write only object
     params = tools_common.create_define_command(customObjects)
     result = client_define(self.config, *params)
     self.assertEqual(0, result.code)
     result = client_set(self.config, "--create /1001/0 --create /1001/0/100 /1001/0/100=abc")
     self.assertEqual(0, result.code)
     
     expectedStdout = "Object1001[/1001/0]:\n    Resource100[/1001/0/100]: abc\n"
     expectedStderr = ""
     expectedCode = 0
     
     # attempt to get a write only object, should not fail on the client only.
     result = client_get(self.config, "/1001/0/100")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #49
0
    def test_get_write_only_resource(self):
        # test that we can read from a write only resource - client should have power to do anything
        customObjects = (CustomObject(
            "Object1001", 1001, False, "single", (CustomResource(
                "Resource100", 100, "string", "single", "optional", "w"), )), )

        #define and set the write only object
        params = tools_common.create_define_command(customObjects)
        result = client_define(self.config, *params)
        self.assertEqual(0, result.code)
        result = client_set(
            self.config,
            "--create /1001/0 --create /1001/0/100 /1001/0/100=abc")
        self.assertEqual(0, result.code)

        expectedStdout = "Object1001[/1001/0]:\n    Resource100[/1001/0/100]: abc\n"
        expectedStderr = ""
        expectedCode = 0

        # attempt to get a write only object, should not fail on the client only.
        result = client_get(self.config, "/1001/0/100")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #50
0
 def test_subscribe_multiple_resources_multiple_changes(self):
     # test that we can subscribe to a single change of value on 
     # one of the multiple resources specified
     
     # open client subscribe subprocess. Only wait for a single change to one of the resources
     port = self.config.clientIpcPort
     subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                 "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0 /3/0/1" % (port,))
     # wait for subscribe process to start up
     
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/0 Change\n")
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/1 Change\n")
     self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for 1 notifications over 5 seconds:\n")
     
     # do set command and expect notifications from the subscribe subprocess
     expectedStdout = ""
     expectedStderr = ""
     expectedCode = 0
     
     # set the first resource
     result = client_set(self.config, "/3/0/0=abc /3/0/1=def")
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
     
     expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nNotify 2:\nChanged: /3/0/1 Resource Modified:\nDevice[/3/0]:\n    ModelNumber[/3/0/1]: def\nSession disconnected\n"
     expectedStderr = ""
     expectedCode = 0
     
     result = tools_common.non_blocking_get_run_result(subscribeProcess)
     
     self.assertEqual(expectedStdout, result.stdout)
     self.assertEqual(expectedStderr, result.stderr)
     self.assertEqual(expectedCode, result.code)
コード例 #51
0
    def test_set_get_multiple_resources_same_instance(self):
        # test that multiple resources from the same instance can be set and retrieved with a single command
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        memoryFree = 55
        expectedStdout = \
"""Device[/3/0]:
    Manufacturer[/3/0/0]: %s
    ModelNumber[/3/0/1]: %s
    MemoryFree[/3/0/10]: %d
""" % (manufacturer, modelNumber, memoryFree)
        expectedStderr = ""
        expectedCode = 0

        client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer,))
        client_set(self.config, "/3/0/1=\"%s\"" % (modelNumber,))
        client_set(self.config, "/3/0/10=%d" % (memoryFree,))

        result = client_get(self.config, "/3/0/0", "/3/0/1", "/3/0/10")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #52
0
    def test_set_get_multiple_resources_same_instance(self):
        # test that multiple resources from the same instance can be set and retrieved with a single command
        manufacturer = "ACME Corp."
        modelNumber = "1234567890"
        memoryFree = 55
        expectedStdout = \
"""Device[/3/0]:
    Manufacturer[/3/0/0]: %s
    ModelNumber[/3/0/1]: %s
    MemoryFree[/3/0/10]: %d
""" % (manufacturer, modelNumber, memoryFree)
        expectedStderr = ""
        expectedCode = 0

        client_set(self.config, "/3/0/0=\"%s\"" % (manufacturer, ))
        client_set(self.config, "/3/0/1=\"%s\"" % (modelNumber, ))
        client_set(self.config, "/3/0/10=%d" % (memoryFree, ))

        result = client_get(self.config, "/3/0/0", "/3/0/1", "/3/0/10")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #53
0
    def test_subscribe_single_resource_multiple_changes_skip_same_value(self):
        # test that we don't get a notify if we set a value to resource that already has that value
        port = self.config.clientIpcPort
        
        # open client subscribe subprocess. Wait for a change to the resource
        subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                    "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" % (port,))
        time.sleep(0.25)
        # wait for subscribe process to start up
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/0 Change\n")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for 1 notifications over 5 seconds:\n")
        
        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0
        
        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0
        
        result = tools_common.non_blocking_get_run_result(subscribeProcess)
        
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
        
        # open a new client subscribe subprocess. Wait for a change to the resource
        subscribeProcess = tools_common.run_non_blocking(tools_common.CLIENT_SUBSCRIBE, 
                                                    "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" % (port,))
        
        # wait for subscribe process to start up
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session IPC configured for UDP: address 127.0.0.1, port %d" % (port,))
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Session connected")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Subscribe /3/0/0 Change\n")
        self.assertEqual(tools_common.strip_prefix(subscribeProcess.stdout.readline()), "Waiting for 1 notifications over 5 seconds:\n")
        
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0
        
        # do set command. This one should NOT cause a notify.
        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
        
        # do another set command. This one should cause a notify.
        result = client_set(self.config, "/3/0/0=def")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: def\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0
        
        result = tools_common.non_blocking_get_run_result(subscribeProcess)
        
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)
コード例 #54
0
    def test_subscribe_single_resource_multiple_changes_skip_same_value(self):
        # test that we don't get a notify if we set a value to resource that already has that value
        port = self.config.clientIpcPort

        # open client subscribe subprocess. Wait for a change to the resource
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" %
            (port, ))
        time.sleep(0.25)
        # wait for subscribe process to start up
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/0 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for 1 notifications over 5 seconds:\n")

        # do set command
        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: abc\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # open a new client subscribe subprocess. Wait for a change to the resource
        subscribeProcess = tools_common.run_non_blocking(
            tools_common.CLIENT_SUBSCRIBE,
            "--verbose --ipcPort %i --waitCount 1 --waitTime 5 /3/0/0" %
            (port, ))

        # wait for subscribe process to start up
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session IPC configured for UDP: address 127.0.0.1, port %d" %
            (port, ))
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Session connected")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Subscribe /3/0/0 Change\n")
        self.assertEqual(
            tools_common.strip_prefix(subscribeProcess.stdout.readline()),
            "Waiting for 1 notifications over 5 seconds:\n")

        expectedStdout = ""
        expectedStderr = ""
        expectedCode = 0

        # do set command. This one should NOT cause a notify.
        result = client_set(self.config, "/3/0/0=abc")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # do another set command. This one should cause a notify.
        result = client_set(self.config, "/3/0/0=def")
        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)

        # read subscribe output
        expectedStdout = "Notify 1:\nChanged: /3/0/0 Resource Modified:\nDevice[/3/0]:\n    Manufacturer[/3/0/0]: def\nSession disconnected\n"
        expectedStderr = ""
        expectedCode = 0

        result = tools_common.non_blocking_get_run_result(subscribeProcess)

        self.assertEqual(expectedStdout, result.stdout)
        self.assertEqual(expectedStderr, result.stderr)
        self.assertEqual(expectedCode, result.code)