def test_fit_attr_update(self):
# Here we create 2 separate fits with ships affecting it;
# each ship affects module with different strength. When we
# pass module from one fit to another, its internal attribute
# storage should be cleared. If it wasn't cleared, we wouldn't
# be able to get refreshed value of attribute
src_attr = self.ch.attribute(attribute_id=1)
tgt_attr = self.ch.attribute(attribute_id=2)
modifier = Modifier()
modifier.state = State.offline
modifier.scope = Scope.local
modifier.src_attr = src_attr.id
modifier.operator = Operator.post_percent
modifier.tgt_attr = tgt_attr.id
modifier.domain = Domain.ship
modifier.filter_type = FilterType.all_
modifier.filter_value = None
effect = self.ch.effect(effect_id=1, category=EffectCategory.passive)
effect.modifiers = (modifier, )
ship1 = IndependentItem(
self.ch.type_(type_id=1,
effects=(effect, ),
attributes={src_attr.id: 10}))
ship2 = IndependentItem(
self.ch.type_(type_id=2,
effects=(effect, ),
attributes={src_attr.id: 20}))
module = ShipItem(
self.ch.type_(type_id=3, attributes={tgt_attr.id: 50}))
fit1 = Fit(self.ch)
fit1.ship = ship1
fit2 = Fit(self.ch)
fit2.ship = ship2
fit1.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr.id), 55)
fit1.items.remove(module)
fit1.ship = None
self.assert_link_buffers_empty(fit1)
fit2.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr.id), 60)
fit2.ship = None
fit2.items.remove(module)
self.assert_link_buffers_empty(fit2)
def test_fit_attr_update(self):
# Here we create 2 separate fits with ships affecting it;
# each ship affects module with different strength. When we
# pass module from one fit to another, its internal attribute
# storage should be cleared. If it wasn't cleared, we wouldn't
# be able to get refreshed value of attribute
src_attr = self.ch.attribute(attribute_id=1)
tgt_attr = self.ch.attribute(attribute_id=2)
modifier = Modifier()
modifier.state = State.offline
modifier.scope = Scope.local
modifier.src_attr = src_attr.id
modifier.operator = Operator.post_percent
modifier.tgt_attr = tgt_attr.id
modifier.domain = Domain.ship
modifier.filter_type = FilterType.all_
modifier.filter_value = None
effect = self.ch.effect(effect_id=1, category=EffectCategory.passive)
effect.modifiers = (modifier,)
ship1 = IndependentItem(self.ch.type_(type_id=1, effects=(effect,), attributes={src_attr.id: 10}))
ship2 = IndependentItem(self.ch.type_(type_id=2, effects=(effect,), attributes={src_attr.id: 20}))
module = ShipItem(self.ch.type_(type_id=3, attributes={tgt_attr.id: 50}))
fit1 = Fit(self.ch)
fit1.ship = ship1
fit2 = Fit(self.ch)
fit2.ship = ship2
fit1.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr.id), 55)
fit1.items.remove(module)
fit1.ship = None
self.assert_link_buffers_empty(fit1)
fit2.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr.id), 60)
fit2.ship = None
fit2.items.remove(module)
self.assert_link_buffers_empty(fit2)
def test_source_attr_update(self):
# Here we check if attributes are updated if fit gets new
# source instance; we do not actually switch source but we
# switch cache_handler, and it should be enough
cache_handler1 = CacheHandler()
cache_handler2 = CacheHandler()
src_attr1 = cache_handler1.attribute(attribute_id=1)
tgt_attr1 = cache_handler1.attribute(attribute_id=2, max_attribute=33)
cache_handler1.attribute(attribute_id=33, default_value=100)
src_attr2 = cache_handler2.attribute(attribute_id=1)
tgt_attr2 = cache_handler2.attribute(attribute_id=2, max_attribute=333)
cache_handler2.attribute(attribute_id=333, default_value=500)
modifier = Modifier()
modifier.state = State.offline
modifier.scope = Scope.local
modifier.src_attr = 1
modifier.operator = Operator.post_percent
modifier.tgt_attr = 2
modifier.domain = Domain.ship
modifier.filter_type = FilterType.all_
modifier.filter_value = None
effect1 = cache_handler1.effect(effect_id=1,
category=EffectCategory.passive)
effect1.modifiers = (modifier, )
effect2 = cache_handler1.effect(effect_id=111,
category=EffectCategory.passive)
effect2.modifiers = (modifier, )
# Our holders from test environment fo not update undelying
# item automatically when source is changed, thus we do it
# manually
ship_item1 = cache_handler1.type_(type_id=8,
effects=(effect1, ),
attributes={src_attr1.id: 10})
ship_item2 = cache_handler2.type_(type_id=8,
effects=(effect2, ),
attributes={src_attr2.id: 20})
module_item1 = cache_handler1.type_(type_id=4,
attributes={tgt_attr1.id: 50})
module_item2 = cache_handler2.type_(type_id=4,
attributes={tgt_attr2.id: 75})
fit = Fit(cache_handler1)
ship = IndependentItem(ship_item1)
module = ShipItem(module_item1)
fit.ship = ship
fit.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr1.id), 55)
# As we have capped attr, this auxiliary map shouldn't be None
self.assertIsNotNone(module.attributes._cap_map)
# Make an 'source switch': remove holders from attribute_calculator
for holder in (ship, module):
disabled_states = set(filter(lambda s: s <= holder.state, State))
fit._link_tracker.disable_states(holder, disabled_states)
fit._link_tracker.remove_holder(holder)
# Refresh holders and replace source
fit.source.cache_handler = cache_handler2
ship.attributes.clear()
ship.item = ship_item2
module.attributes.clear()
module.item = module_item2
# When we cleared holders, auxiliary map for capped attrs should be None.
# Using data in this map, attributes which depend on capping attribute will
# be cleared. If we don't clear it, there're chances that in new data this
# capping-capped attribute pair won't exist, thus if attribute with ID which
# used to cap is changed, it will clear attribute which used to be capped -
# and we do not want it within scope of new data.
self.assertIsNone(module.attributes._cap_map)
# Add holders again, when new items are in holders
for holder in (ship, module):
fit._link_tracker.add_holder(holder)
enabled_states = set(filter(lambda s: s <= holder.state, State))
fit._link_tracker.enable_states(holder, enabled_states)
# Now we should have calculated value based on both updated attribs
# if attribs weren't refreshed, we would use old value for modification
# (10 instead of 20)
self.assertAlmostEqual(module.attributes.get(tgt_attr2.id), 90)
fit.ship = None
fit.items.remove(module)
self.assert_link_buffers_empty(fit)
def test_source_attr_update(self):
# Here we check if attributes are updated if fit gets new
# source instance; we do not actually switch source but we
# switch cache_handler, and it should be enough
cache_handler1 = CacheHandler()
cache_handler2 = CacheHandler()
src_attr1 = cache_handler1.attribute(attribute_id=1)
tgt_attr1 = cache_handler1.attribute(attribute_id=2, max_attribute=33)
cache_handler1.attribute(attribute_id=33, default_value=100)
src_attr2 = cache_handler2.attribute(attribute_id=1)
tgt_attr2 = cache_handler2.attribute(attribute_id=2, max_attribute=333)
cache_handler2.attribute(attribute_id=333, default_value=500)
modifier = Modifier()
modifier.state = State.offline
modifier.scope = Scope.local
modifier.src_attr = 1
modifier.operator = Operator.post_percent
modifier.tgt_attr = 2
modifier.domain = Domain.ship
modifier.filter_type = FilterType.all_
modifier.filter_value = None
effect1 = cache_handler1.effect(effect_id=1, category=EffectCategory.passive)
effect1.modifiers = (modifier,)
effect2 = cache_handler1.effect(effect_id=111, category=EffectCategory.passive)
effect2.modifiers = (modifier,)
# Our holders from test environment fo not update undelying
# item automatically when source is changed, thus we do it
# manually
ship_item1 = cache_handler1.type_(type_id=8, effects=(effect1,), attributes={src_attr1.id: 10})
ship_item2 = cache_handler2.type_(type_id=8, effects=(effect2,), attributes={src_attr2.id: 20})
module_item1 = cache_handler1.type_(type_id=4, attributes={tgt_attr1.id: 50})
module_item2 = cache_handler2.type_(type_id=4, attributes={tgt_attr2.id: 75})
fit = Fit(cache_handler1)
ship = IndependentItem(ship_item1)
module = ShipItem(module_item1)
fit.ship = ship
fit.items.add(module)
self.assertAlmostEqual(module.attributes.get(tgt_attr1.id), 55)
# As we have capped attr, this auxiliary map shouldn't be None
self.assertIsNotNone(module.attributes._cap_map)
# Make an 'source switch': remove holders from attribute_calculator
for holder in (ship, module):
disabled_states = set(filter(lambda s: s <= holder.state, State))
fit._link_tracker.disable_states(holder, disabled_states)
fit._link_tracker.remove_holder(holder)
# Refresh holders and replace source
fit.source.cache_handler = cache_handler2
ship.attributes.clear()
ship.item = ship_item2
module.attributes.clear()
module.item = module_item2
# When we cleared holders, auxiliary map for capped attrs should be None.
# Using data in this map, attributes which depend on capping attribute will
# be cleared. If we don't clear it, there're chances that in new data this
# capping-capped attribute pair won't exist, thus if attribute with ID which
# used to cap is changed, it will clear attribute which used to be capped -
# and we do not want it within scope of new data.
self.assertIsNone(module.attributes._cap_map)
# Add holders again, when new items are in holders
for holder in (ship, module):
fit._link_tracker.add_holder(holder)
enabled_states = set(filter(lambda s: s <= holder.state, State))
fit._link_tracker.enable_states(holder, enabled_states)
# Now we should have calculated value based on both updated attribs
# if attribs weren't refreshed, we would use old value for modification
# (10 instead of 20)
self.assertAlmostEqual(module.attributes.get(tgt_attr2.id), 90)
fit.ship = None
fit.items.remove(module)
self.assert_link_buffers_empty(fit)
