def __init__(self):
argparser = argparse.ArgumentParser()
argparser.add_argument("-d",
"--device",
help="serial device /dev file modem",
default="/dev/ttyUSB0")
argparser.add_argument("-r",
"--rate",
help="baudrate for serial device",
type=int,
default=115200)
argparser.add_argument("-v",
"--verbose",
help="verbose",
default=False,
action="store_true")
argparser.add_argument("-b",
"--broker",
help="mqtt broker hostname",
default="localhost")
self.serial = None
self.modem_uid = None
self.bridge_count = 0
self.next_report = 0
self.config = argparser.parse_args()
configure_default_logger(self.config.verbose)
self.setup_modem()
self.connect_to_mqtt()
def __init__(self):
self.argparser = argparse.ArgumentParser(
fromfile_prefix_chars="@",
description="Test throughput over 2 serial D7 modems"
)
self.argparser.add_argument("-n", "--msg-count", help="number of messages to transmit", type=int, default=10)
self.argparser.add_argument("-p", "--payload-size", help="number of bytes of (appl level) payload to transmit", type=int, default=50)
self.argparser.add_argument("-sw", "--serial-transmitter", help="serial device /dev file transmitter node", default=None)
self.argparser.add_argument("-sr", "--serial-receiver", help="serial device /dev file receiver node", default=None)
self.argparser.add_argument("-r", "--rate", help="baudrate for serial device", type=int, default=115200)
self.argparser.add_argument("-uid", "--unicast-uid", help="UID to use for unicast transmission, "
"when not using receiver "
"(in hexstring, for example 0xb57000009151d)", default=None)
self.argparser.add_argument("-to", "--receiver-timeout", help="timeout for the receiver (in seconds)", type=int, default=10)
self.argparser.add_argument("-v", "--verbose", help="verbose", default=False, action="store_true")
self.config = self.argparser.parse_args()
configure_default_logger(self.config.verbose)
if self.config.serial_transmitter == None and self.config.serial_receiver == None:
self.argparser.error("At least a transmitter or receiver is required.")
if self.config.serial_receiver == None and self.config.unicast_uid == None:
self.argparser.error("When running without receiver a --unicast-uid parameter is required.")
if self.config.serial_transmitter == None:
self.transmitter_modem = None
print("Running without transmitter")
else:
self.transmitter_modem = Modem(self.config.serial_transmitter, self.config.rate, None)
access_profile = AccessProfile(
channel_header=ChannelHeader(channel_band=ChannelBand.BAND_868,
channel_coding=ChannelCoding.PN9,
channel_class=ChannelClass.NORMAL_RATE),
sub_profiles=[SubProfile(subband_bitmap=0x01, scan_automation_period=CT(exp=0, mant=0)), SubProfile(), SubProfile(), SubProfile()],
sub_bands=[SubBand(
channel_index_start=0,
channel_index_end=0,
eirp=10,
cca=86 # TODO
)]
)
print("Write Access Profile")
write_ap_cmd = Command.create_with_write_file_action_system_file(file=AccessProfileFile(access_profile=access_profile, access_specifier=0))
self.transmitter_modem.execute_command(write_ap_cmd, timeout_seconds=1)
if self.config.serial_receiver == None:
self.receiver_modem = None
print("Running without receiver")
else:
self.receiver_modem = Modem(self.config.serial_receiver, self.config.rate, self.receiver_cmd_callback)
self.receiver_modem.execute_command(Command.create_with_write_file_action_system_file(DllConfigFile(active_access_class=0x01)), timeout_seconds=1)
print("Receiver scanning on Access Class = 0x01")
def __init__(self):
argparser = argparse.ArgumentParser()
argparser.add_argument("-d", "--device", help="serial device /dev file modem",
default="/dev/ttyACM0")
argparser.add_argument("-di", "--device-id", help="gateway device-id", required=True)
argparser.add_argument("-r", "--rate", help="baudrate for serial device", type=int, default=115200)
argparser.add_argument("-v", "--verbose", help="verbose", default=False, action="store_true")
argparser.add_argument("-b", "--broker", help="mqtt broker hostname",
default="localhost")
argparser.add_argument("-t", "--topic", help="mqtt topic",
default="/gw/{}")
self.serial = None
self.modem_uid = None
self.bridge_count = 0
self.next_report = 0
self.config = argparser.parse_args()
configure_default_logger(self.config.verbose)
self.modem = Modem(self.config.device, self.config.rate, self.on_command_received, skip_alp_parsing=True)
self.modem.connect()
self.connect_to_mqtt()
help="baudrate for serial device",
type=int,
default=115200)
argparser.add_argument("-v",
"--verbose",
help="verbose",
default=False,
action="store_true")
argparser.add_argument(
"-f",
"--file_id",
help="File where we're writing the interface configuration",
default=0x1D)
argparser.add_argument("-t", "--timeout", help="timeout", type=int, default=0)
config = argparser.parse_args()
configure_default_logger(config.verbose)
modem = Modem(config.device,
config.rate,
unsolicited_response_received_callback=received_command_callback)
modem.connect()
# D7 Example
interface_file = InterfaceConfigurationFile(
interface_configuration=InterfaceConfiguration(
interface_id=InterfaceType.D7ASP,
interface_configuration=Configuration(
qos=QoS(resp_mod=ResponseMode.RESP_MODE_PREFERRED,
retry_mod=RetryMode.RETRY_MODE_NO,
stop_on_err=False,
record=False),
"--device",
help="serial device /dev file modem",
default="/dev/ttyUSB0")
argparser.add_argument("-r",
"--rate",
help="baudrate for serial device",
type=int,
default=115200)
argparser.add_argument("-v",
"--verbose",
help="verbose",
default=False,
action="store_true")
argparser.add_argument("-f", "--file", help="file for OTA", required=True)
config = argparser.parse_args()
configure_default_logger(config.verbose, logging_level=logging.WARNING)
modem = Modem(config.device,
config.rate,
unsolicited_response_received_callback=received_command_callback,
rebooted_callback=rebooted_callback)
modem.connect()
data = [0]
print(data)
cmd = Command.create_with_write_file_action(file_id=199, data=data)
answ = modem.execute_command(cmd)
cmd = Command()
f = open(config.file, "rb")
