def OnPrint(self, e):
if len(self.filelist) < 1:
wx.MessageBox('You need to load a file and slice it before you can print it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
return
if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
wx.MessageBox('You need to slice the file to GCode before you can print it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
return
printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
def OnPrint(self, e):
if len(self.filelist) < 1:
wx.MessageBox(
'You need to load a file and prepare it before you can print.',
'Print error', wx.OK | wx.ICON_INFORMATION)
return
if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
wx.MessageBox('You need to prepare the file before you can print.',
'Print error', wx.OK | wx.ICON_INFORMATION)
return
printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
def _stitchMultiExtruder(self):
files = []
resultFile = open(sliceRun.getExportFilename(self.filelist[0]), "w")
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode'))
for filename in self.filelist:
if os.path.isfile(
sliceRun.getExportFilename(filename, 'multi_extrude_tmp')):
files.append(
open(
sliceRun.getExportFilename(filename,
'multi_extrude_tmp'), "r"))
else:
return
currentExtruder = 0
resultFile.write('T%d\n' % (currentExtruder))
layerNr = -1
hasLine = True
while hasLine:
hasLine = False
for f in files:
layerHasLine = False
for line in f:
hasLine = True
if line.startswith(';LAYER:'):
break
if 'Z' in line:
lastZ = float(re.search('Z([^\s]+)', line).group(1))
if not layerHasLine:
nextExtruder = files.index(f)
resultFile.write(';LAYER:%d\n' % (layerNr))
resultFile.write(';EXTRUDER:%d\n' % (nextExtruder))
if nextExtruder != currentExtruder:
resultFile.write(';TYPE:CUSTOM\n')
profile.setTempOverride('extruder', nextExtruder)
resultFile.write(
profile.getAlterationFileContents(
'switchExtruder.gcode'))
profile.resetTempOverride()
currentExtruder = nextExtruder
layerHasLine = True
resultFile.write(line)
layerNr += 1
for f in files:
f.close()
for filename in self.filelist:
os.remove(sliceRun.getExportFilename(filename,
'multi_extrude_tmp'))
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
def OnCopyToSD(self, e):
if profile.getPreference('sdpath') == '':
wx.MessageBox(
"You need to configure your SD card drive first before you can copy files to it.\nOpening the preferences now.",
'No SD card drive.', wx.OK | wx.ICON_INFORMATION)
prefDialog = preferencesDialog.preferencesDialog(self.GetParent())
prefDialog.Centre()
prefDialog.Show(True)
if profile.getPreference('sdpath') == '':
print "No path set"
return
exportFilename = sliceRun.getExportFilename(self.filelist[0])
filename = os.path.basename(exportFilename)
if profile.getPreference('sdshortnames') == 'True':
filename = sliceRun.getShortFilename(filename)
try:
shutil.copy(
exportFilename,
os.path.join(profile.getPreference('sdpath'), filename))
except:
self.GetParent().preview3d.ShowWarningPopup(
"Failed to copy file to SD card.")
return
self.GetParent().preview3d.ShowWarningPopup(
"Copy finished, safely remove SD card?", self.OnSafeRemove)
def OnCopyToSD(self, e):
exportFilename = sliceRun.getExportFilename(self.filelist[0])
filename = os.path.basename(exportFilename)
if profile.getPreference('sdshortnames') == 'True':
filename = sliceRun.getShortFilename(filename)
shutil.copy(exportFilename,
os.path.join(profile.getPreference('sdpath'), filename))
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[0])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
line = p.stdout.readline()
self.returnCode = p.wait()
gcodeFilename = sliceRun.getExportFilename(self.filename)
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
def OnPrint(self, e):
if len(self.filelist) < 1:
wx.MessageBox(
"You need to load a file and prepare it before you can print.",
"Print error",
wx.OK | wx.ICON_INFORMATION,
)
return
if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
wx.MessageBox(
"You need to prepare a print before you can run the actual print.",
"Print error",
wx.OK | wx.ICON_INFORMATION,
)
return
printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
def loadModelFiles(self, filelist, showWarning = False):
while len(filelist) > len(self.objectList):
self.objectList.append(previewObject())
for idx in xrange(len(filelist), len(self.objectList)):
self.objectList[idx].mesh = None
self.objectList[idx].filename = None
for idx in xrange(0, len(filelist)):
obj = self.objectList[idx]
if obj.filename != filelist[idx]:
obj.fileTime = None
self.gcodeFileTime = None
self.logFileTime = None
obj.filename = filelist[idx]
self.gcodeFilename = sliceRun.getExportFilename(filelist[0])
#Do the STL file loading in a background thread so we don't block the UI.
if self.loadThread != None and self.loadThread.isAlive():
self.loadThread.join()
self.loadThread = threading.Thread(target=self.doFileLoadThread)
self.loadThread.daemon = True
self.loadThread.start()
if showWarning:
if profile.getProfileSettingFloat('model_scale') != 1.0 or profile.getProfileSettingFloat('model_rotate_base') != 0 or profile.getProfileSetting('flip_x') != 'False' or profile.getProfileSetting('flip_y') != 'False' or profile.getProfileSetting('flip_z') != 'False' or profile.getProfileSetting('swap_xz') != 'False' or profile.getProfileSetting('swap_yz') != 'False':
self.warningPopup.Show(True)
self.warningPopup.timer.Start(5000)
def OnCopyToSD(self, e):
for f in self.filenameList:
exportFilename = sliceRun.getExportFilename(f)
filename = os.path.basename(exportFilename)
if profile.getPreference('sdshortnames') == 'True':
filename = sliceRun.getShortFilename(filename)
shutil.copy(exportFilename, os.path.join(profile.getPreference('sdpath'), filename))
def _stitchMultiExtruder(self):
files = []
resultFile = open(sliceRun.getExportFilename(self.filelist[0]), "w")
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode'))
for filename in self.filelist:
if os.path.isfile(sliceRun.getExportFilename(filename, 'multi_extrude_tmp')):
files.append(open(sliceRun.getExportFilename(filename, 'multi_extrude_tmp'), "r"))
else:
return
currentExtruder = 0
resultFile.write('T%d\n' % (currentExtruder))
layerNr = -1
hasLine = True
while hasLine:
hasLine = False
for f in files:
layerHasLine = False
for line in f:
hasLine = True
if line.startswith(';LAYER:'):
break
if 'Z' in line:
lastZ = float(re.search('Z([^\s]+)', line).group(1))
if not layerHasLine:
nextExtruder = files.index(f)
resultFile.write(';LAYER:%d\n' % (layerNr))
resultFile.write(';EXTRUDER:%d\n' % (nextExtruder))
if nextExtruder != currentExtruder:
resultFile.write(';TYPE:CUSTOM\n')
profile.setTempOverride('extruder', nextExtruder)
resultFile.write(profile.getAlterationFileContents('switchExtruder.gcode'))
profile.resetTempOverride()
currentExtruder = nextExtruder
layerHasLine = True
resultFile.write(line)
layerNr += 1
for f in files:
f.close()
for filename in self.filelist:
os.remove(sliceRun.getExportFilename(filename, 'multi_extrude_tmp'))
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
def run(self):
p = subprocess.Popen(self.cmdList[self.fileIdx],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while (len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0],
int(progress[1]), maxValue)
else:
#print line
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel,
"Aborted by user.")
return
line = p.stdout.readline()
self.returnCode = p.wait()
logfile = open(
sliceRun.getExportFilename(self.filelist[self.fileIdx], "log"),
"w")
for logLine in self.progressLog:
logfile.write(logLine)
logfile.write('\n')
logfile.close()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(sliceRun.getExportFilename(self.filelist[0]))
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def loadModelFiles(self, filelist): while len(filelist) > len(self.objectList): self.objectList.append(previewObject()) for idx in xrange(len(filelist), len(self.objectList)): self.objectList[idx].mesh = None self.objectList[idx].filename = None for idx in xrange(0, len(filelist)): obj = self.objectList[idx] if obj.filename != filelist[idx]: obj.fileTime = None self.gcodeFileTime = None self.logFileTime = None obj.filename = filelist[idx] self.gcodeFilename = sliceRun.getExportFilename(filelist[0]) self.logFilename = sliceRun.getExportFilename(filelist[0], "log") #Do the STL file loading in a background thread so we don't block the UI. if self.loadThread != None and self.loadThread.isAlive(): self.loadThread.join() self.loadThread = threading.Thread(target=self.doFileLoadThread) self.loadThread.daemon = True self.loadThread.start()
def loadModelFiles(self, filelist):
while len(filelist) > len(self.objectList):
self.objectList.append(previewObject())
for idx in xrange(len(filelist), len(self.objectList)):
self.objectList[idx].mesh = None
self.objectList[idx].filename = None
for idx in xrange(0, len(filelist)):
obj = self.objectList[idx]
if obj.filename != filelist[idx]:
obj.fileTime = None
self.gcodeFileTime = None
self.logFileTime = None
obj.filename = filelist[idx]
self.gcodeFilename = sliceRun.getExportFilename(filelist[0])
self.logFilename = sliceRun.getExportFilename(filelist[0], "log")
#Do the STL file loading in a background thread so we don't block the UI.
if self.loadThread != None and self.loadThread.isAlive():
self.loadThread.join()
self.loadThread = threading.Thread(target=self.doFileLoadThread)
self.loadThread.daemon = True
self.loadThread.start()
def run(self):
p = subprocess.Popen(self.cmdList[self.fileIdx], stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
#print line
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
self.returnCode = p.wait()
logfile = open(sliceRun.getExportFilename(self.filelist[self.fileIdx], "log"), "w")
for logLine in self.progressLog:
logfile.write(logLine)
logfile.write('\n')
logfile.close()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(sliceRun.getExportFilename(self.filelist[0]))
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while (len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0],
int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel,
"Aborted by user.")
return
line = p.stdout.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
wx.CallAfter(self.notifyWindow.statusText.SetLabel,
"Running plugins")
ret = profile.runPostProcessingPlugins(gcodeFilename)
if ret != None:
self.progressLog.append(ret)
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def OnCopyToSD(self, e):
if profile.getPreference('sdpath') == '':
wx.MessageBox("You need to configure your SD card drive first before you can copy files to it.\nOpening the preferences now.", 'No SD card drive.', wx.OK | wx.ICON_INFORMATION)
prefDialog = preferencesDialog.preferencesDialog(self.GetParent())
prefDialog.Centre()
prefDialog.Show(True)
if profile.getPreference('sdpath') == '':
print "No path set"
return
exportFilename = sliceRun.getExportFilename(self.filelist[0])
filename = os.path.basename(exportFilename)
if profile.getPreference('sdshortnames') == 'True':
filename = sliceRun.getShortFilename(filename)
try:
shutil.copy(exportFilename, os.path.join(profile.getPreference('sdpath'), filename))
except:
self.GetParent().preview3d.ShowWarningPopup("Failed to copy file to SD card.")
return
self.GetParent().preview3d.ShowWarningPopup("Copy finished, safely remove SD card?", self.OnSafeRemove)
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Running plugins")
ret = profile.runPostProcessingPlugins(gcodeFilename)
if ret != None:
self.progressLog.append(ret)
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def loadModelFiles(self, filelist, showWarning=False):
while len(filelist) > len(self.objectList):
self.objectList.append(previewObject())
for idx in xrange(len(filelist), len(self.objectList)):
self.objectList[idx].mesh = None
self.objectList[idx].filename = None
for idx in xrange(0, len(filelist)):
obj = self.objectList[idx]
if obj.filename != filelist[idx]:
obj.fileTime = None
self.gcodeFileTime = None
self.logFileTime = None
obj.filename = filelist[idx]
self.gcodeFilename = sliceRun.getExportFilename(filelist[0])
#Do the STL file loading in a background thread so we don't block the UI.
if self.loadThread != None and self.loadThread.isAlive():
self.loadThread.join()
self.loadThread = threading.Thread(target=self.doFileLoadThread)
self.loadThread.daemon = True
self.loadThread.start()
if showWarning:
if profile.getProfileSettingFloat(
'model_scale') != 1.0 or profile.getProfileSettingFloat(
'model_rotate_base') != 0 or profile.getProfileSetting(
'flip_x') != 'False' or profile.getProfileSetting(
'flip_y'
) != 'False' or profile.getProfileSetting(
'flip_z'
) != 'False' or profile.getProfileSetting(
'swap_xz'
) != 'False' or profile.getProfileSetting(
'swap_yz') != 'False':
self.warningPopup.Show(True)
self.warningPopup.timer.Start(5000)
def OnRun(self):
resultFile = open(self.resultFilename, "w")
put = profile.setTempOverride
self.progressLog = []
for action in self.actionList:
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.actionList.index(action) + 1, len(self.actionList)))
if not action.usePreviousSlice:
p = sliceRun.startSliceCommandProcess(action.sliceCmd)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
resultFile.close()
return
line = p.stdout.readline()
self.returnCode = p.wait()
put('machine_center_x', action.centerX - self.extruderOffset[action.extruder][0])
put('machine_center_y', action.centerY - self.extruderOffset[action.extruder][1])
put('clear_z', action.clearZ)
put('extruder', action.extruder)
put('print_temperature', action.temperature)
if action == self.actionList[0]:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('T%d\n' % (action.extruder))
currentExtruder = action.extruder
prevTemp = action.temperature
startGCode = profile.getAlterationFileContents('start.gcode')
startGCode = startGCode.replace('?filename?', 'Multiple files')
resultFile.write(startGCode)
else:
#reset the extrusion length, and move to the next object center.
resultFile.write(';TYPE:CUSTOM\n')
if prevTemp != action.temperature and action.temperature > 0:
resultFile.write('M104 S%d\n' % (int(action.temperature)))
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
profile.resetTempOverride()
if not action.usePreviousSlice:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
data = f.read(4096)
while data != '':
resultFile.write(data)
data = f.read(4096)
f.close()
savedCenterX = action.centerX
savedCenterY = action.centerY
else:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
for line in f:
if line[0] != ';':
if 'X' in line:
line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
if 'Y' in line:
line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
resultFile.write(line)
f.close()
if not action.leaveResultForNextSlice:
os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
wx.CallAfter(self.progressGauge.SetValue, 10000)
self.totalDoneFactor = 0.0
wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
resultFile.write(';TYPE:CUSTOM\n')
if len(self.actionList) > 1 and self.actionList[-1].clearZ > 1:
#only move to higher Z if we have sliced more then 1 object. This solves the "move into print after printing" problem with the print-all-at-once option.
resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost != False:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def OnRun(self):
resultFile = open(self.resultFilename, "w")
put = profile.setTempOverride
self.progressLog = []
for action in self.actionList:
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.actionList.index(action) + 1, len(self.actionList)))
if not action.usePreviousSlice:
p = subprocess.Popen(action.sliceCmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
print line
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
resultFile.close()
return
line = p.stdout.readline()
self.returnCode = p.wait()
put('machine_center_x', action.centerX - self.extruderOffset[action.extruder][0])
put('machine_center_y', action.centerY - self.extruderOffset[action.extruder][1])
put('clear_z', action.clearZ)
put('extruder', action.extruder)
put('print_temperature', action.temperature)
if action == self.actionList[0]:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('T%d\n' % (action.extruder))
currentExtruder = action.extruder
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('start.gcode'))
else:
#reset the extrusion length, and move to the next object center.
resultFile.write(';TYPE:CUSTOM\n')
if prevTemp != action.temperature:
resultFile.write('M104 S%d\n' % (int(action.temperature)))
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
profile.resetTempOverride()
if not action.usePreviousSlice:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
data = f.read(4096)
while data != '':
resultFile.write(data)
data = f.read(4096)
f.close()
savedCenterX = action.centerX
savedCenterY = action.centerY
else:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
for line in f:
if line[0] != ';':
if 'X' in line:
line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
if 'Y' in line:
line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
resultFile.write(line)
f.close()
if not action.leaveResultForNextSlice:
os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
wx.CallAfter(self.progressGauge.SetValue, 10000)
self.totalDoneFactor = 0.0
wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost != False:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def OnOpenFileLocation(self, e):
exporer.openExporer(sliceRun.getExportFilename(self.filelist[0]))
def OnOpenFileLocation(self, e): exporer.openExporer(sliceRun.getExportFilename(self.filelist[0]))
