def test_artifact_signing_keys(
self,
request,
prepared_test_build,
bitbake_variables,
bitbake_path,
bitbake_image,
):
"""Test that MENDER_ARTIFACT_SIGNING_KEY and MENDER_ARTIFACT_VERIFY_KEY
works correctly."""
build_image(
prepared_test_build["build_dir"],
prepared_test_build["bitbake_corebase"],
bitbake_image,
[
'MENDER_ARTIFACT_SIGNING_KEY = "%s"'
% os.path.join(os.getcwd(), signing_key("RSA").private),
'MENDER_ARTIFACT_VERIFY_KEY = "%s"'
% os.path.join(os.getcwd(), signing_key("RSA").public),
],
)
built_rootfs = latest_build_artifact(
request, prepared_test_build["build_dir"], "core-image*.ext[234]"
)
# Copy out the key we just added from the image and use that to
# verify instead of the original, just to be sure.
subprocess.check_call(
[
"debugfs",
"-R",
"dump -p /etc/mender/artifact-verify-key.pem artifact-verify-key.pem",
built_rootfs,
]
)
try:
built_artifact = latest_build_artifact(
request, prepared_test_build["build_dir"], "core-image*.mender"
)
output = subprocess.check_output(
[
"mender-artifact",
"read",
"-k",
os.path.join(os.getcwd(), "artifact-verify-key.pem"),
built_artifact,
]
).decode()
assert output.find("Signature: signed and verified correctly") >= 0
finally:
os.remove("artifact-verify-key.pem")
def test_signed_updates(self, sig_case, bitbake_variables, connection):
"""Test various combinations of signed and unsigned, present and non-
present verification keys."""
file_flag = Helpers.get_file_flag(bitbake_variables)
# mmc mount points are named: /dev/mmcblk0p1
# ubi volumes are named: ubi0_1
(active,
passive) = determine_active_passive_part(bitbake_variables,
connection)
if passive.startswith("ubi"):
passive = "/dev/" + passive
# Generate "update" appropriate for this test case.
# Cheat a little. Instead of spending a lot of time on a lot of reboots,
# just verify that the contents of the update are correct.
new_content = sig_case.label
with open("image.dat", "w") as fd:
fd.write(new_content)
# Write some extra data just to make sure the update is big enough
# to be written even if the checksum is wrong. If it's too small it
# may fail before it has a chance to be written.
fd.write("\x00" * (1048576 * 8))
artifact_args = ""
# Generate artifact with or without signature.
if sig_case.signature:
artifact_args += " -k %s" % signing_key(sig_case.key_type).private
# Generate artifact with specific version. None means default.
if sig_case.artifact_version is not None:
artifact_args += " -v %d" % sig_case.artifact_version
if sig_case.key_type:
sig_key = signing_key(sig_case.key_type)
else:
sig_key = None
image_type = bitbake_variables["MENDER_DEVICE_TYPE"]
subprocess.check_call(
"mender-artifact write rootfs-image %s -t %s -n test-update %s image.dat -o image.mender"
% (artifact_args, image_type, file_flag),
shell=True,
)
# If instructed to, corrupt the signature and/or checksum.
if ((sig_case.signature and not sig_case.signature_ok)
or not sig_case.checksum_ok
or not sig_case.header_checksum_ok):
tar = subprocess.check_output(["tar", "tf", "image.mender"])
tar_list = tar.split()
tmpdir = tempfile.mkdtemp()
try:
shutil.copy("image.mender",
os.path.join(tmpdir, "image.mender"))
cwd = os.open(".", os.O_RDONLY)
os.chdir(tmpdir)
try:
tar = subprocess.check_output(
["tar", "xf", "image.mender"])
if not sig_case.signature_ok:
# Corrupt signature.
with open("manifest.sig", "r+") as fd:
Helpers.corrupt_middle_byte(fd)
if not sig_case.checksum_ok:
os.chdir("data")
try:
data_list = subprocess.check_output(
["tar", "tzf", "0000.tar.gz"])
data_list = data_list.split()
subprocess.check_call(
["tar", "xzf", "0000.tar.gz"])
# Corrupt checksum by changing file slightly.
with open("image.dat", "r+") as fd:
Helpers.corrupt_middle_byte(fd)
# Pack it up again in same order.
os.remove("0000.tar.gz")
subprocess.check_call(
["tar", "czf", "0000.tar.gz"] + data_list)
for data_file in data_list:
os.remove(data_file)
finally:
os.chdir("..")
if not sig_case.header_checksum_ok:
data_list = subprocess.check_output(
["tar", "tzf", "header.tar.gz"])
data_list = data_list.split()
subprocess.check_call(["tar", "xzf", "header.tar.gz"])
# Corrupt checksum by changing file slightly.
with open("headers/0000/files", "a") as fd:
# Some extra data to corrupt the header checksum,
# but still valid JSON.
fd.write(" ")
# Pack it up again in same order.
os.remove("header.tar.gz")
subprocess.check_call(["tar", "czf", "header.tar.gz"] +
data_list)
for data_file in data_list:
os.remove(data_file)
# Make sure we put it back in the same order.
os.remove("image.mender")
subprocess.check_call(["tar", "cf", "image.mender"] +
tar_list)
finally:
os.fchdir(cwd)
os.close(cwd)
shutil.move(os.path.join(tmpdir, "image.mender"),
"image.mender")
finally:
shutil.rmtree(tmpdir, ignore_errors=True)
put_no_sftp("image.mender", connection, remote="/data/image.mender")
# mender-convert'ed images don't have transient mender.conf
device_has_mender_conf = (connection.run(
"test -f /etc/mender/mender.conf", warn=True).return_code == 0)
# mender-convert'ed images don't have this directory, but the test uses
# it to save certificates
connection.run("mkdir -p /data/etc/mender")
try:
# Get configuration from device or create an empty one
if device_has_mender_conf:
connection.run(
"cp /etc/mender/mender.conf /data/etc/mender/mender.conf.bak"
)
get_no_sftp("/etc/mender/mender.conf", connection)
else:
with open("mender.conf", "w") as fd:
json.dump({}, fd)
# Update key in configuration.
with open("mender.conf") as fd:
config = json.load(fd)
if sig_case.key:
config[
"ArtifactVerifyKey"] = "/data/etc/mender/%s" % os.path.basename(
sig_key.public)
put_no_sftp(
sig_key.public,
connection,
remote="/data/etc/mender/%s" %
os.path.basename(sig_key.public),
)
else:
if config.get("ArtifactVerifyKey"):
del config["ArtifactVerifyKey"]
# Send new configuration to device
with open("mender.conf", "w") as fd:
json.dump(config, fd)
put_no_sftp("mender.conf",
connection,
remote="/etc/mender/mender.conf")
os.remove("mender.conf")
# Start by writing known "old" content in the partition.
old_content = "Preexisting partition content"
if "ubi" in passive:
# ubi volumes cannot be directly written to, we have to use
# ubiupdatevol
connection.run('echo "%s" | dd of=/tmp/update.tmp && '
"ubiupdatevol %s /tmp/update.tmp; "
"rm -f /tmp/update.tmp" %
(old_content, passive))
else:
connection.run('echo "%s" | dd of=%s' % (old_content, passive))
result = connection.run("mender install /data/image.mender",
warn=True)
if sig_case.success:
if result.return_code != 0:
pytest.fail(
"Update failed when it should have succeeded: %s, Output: %s"
% (sig_case.label, result))
else:
if result.return_code == 0:
pytest.fail(
"Update succeeded when it should not have: %s, Output: %s"
% (sig_case.label, result))
if sig_case.update_written:
expected_content = new_content
else:
expected_content = old_content
try:
content = connection.run(
"dd if=%s bs=%d count=1" %
(passive, len(expected_content))).stdout
assert content == expected_content, "Case: %s" % sig_case.label
# In Fabric context, SystemExit means CalledProcessError. We should
# not catch all exceptions, because we want to leave assertions
# alone.
# In Fabric2 there might be different exception thrown in that case
# which is UnexpectedExit.
except (SystemExit, UnexpectedExit):
if ("mender-ubi" in bitbake_variables.get(
"MENDER_FEATURES", "").split()
or "mender-ubi" in bitbake_variables.get(
"DISTRO_FEATURES", "").split()):
# For UBI volumes specifically: The UBI_IOCVOLUP call which
# Mender uses prior to writing the data, takes a size
# argument, and if you don't write that amount of bytes, the
# volume is marked corrupted as a security measure. This
# sometimes triggers in our checksum mismatch tests, so
# accept the volume being unreadable in that case.
pass
else:
raise
finally:
# Reset environment to what it was.
_, bootenv_set = bootenv_tools(connection)
connection.run(f"{bootenv_set} mender_boot_part %s" % active[-1:])
connection.run(f"{bootenv_set} mender_boot_part_hex %x" %
int(active[-1:]))
connection.run(f"{bootenv_set} upgrade_available 0")
if device_has_mender_conf:
connection.run(
"cp -L /data/etc/mender/mender.conf.bak $(realpath /etc/mender/mender.conf)"
)
if sig_key:
connection.run("rm -f /etc/mender/%s" %
os.path.basename(sig_key.public))
