def _init(self):
"""Initialize the module.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(self.name, self.__identifier))
# Create thermal mode.
self.__thermal_mode = StateMachine(ThermalMode.NONE)
self.__thermal_mode.on_change(self.__thermal_mode_on_change)
# Create update timer.
self.__update_timer = Timer(5)
# Stop timer.
self.__stop_timer = Timer(10)
# Create temperature processor.
self.__temp_proc = TemperatureProcessor()
# Create temperature queue.
self.__queue_temperatures = deque([], maxlen=20)
# Create registers callbacks.
self.__init_registers()
# Shutting down all the devices.
self.__set_thermal_force(0)
def __init__(self, **config):
"""Constructor
"""
super().__init__(config)
self._vendor = "Flowx"
self._model = "FLX-05F"
# Create logger.
self.__logger = get_logger(__name__)
self.__move_timer = Timer()
# 13 seconds absolute time to react the valve.
# Number is measured by emperic way.
self.__limit_timer = Timer(13)
self.__calibration_state = StateMachine(CalibrationState.NONE)
if "output_cw" in config:
self.__output_cw = config["output_cw"]
if "output_ccw" in config:
self.__output_ccw = config["output_ccw"]
if "limit_cw" in config:
self.__limit_cw = config["limit_cw"]
if "limit_ccw" in config:
self.__limit_ccw = config["limit_ccw"]
if "close_on_shutdown" in config:
self.__close_on_shutdown = config["close_on_shutdown"]
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
def __init_performance_profiler(self):
"""Set the performance profiler.
"""
self.__performance_profiler.enable_mem_profile = True
self.__performance_profiler.enable_time_profile = True
self.__performance_profiler.on_time_change(self.__on_time_change)
self.__performance_profiler.on_memory_change(self.__on_memory_change)
# Setup the performance profiler timer. (60) 10 is for tests.
self.__performance_profiler_timer = Timer(10)
def __init_runtime(self):
# Update timer.
self.__update_timer = Timer(self.__update_rate)
# Update with offset based on the serial number of the device.
time_offset = 0
if self.__controller.serial_number is not None and self.__controller.serial_number.isdigit():
time_offset = int(self.__controller.serial_number)
# Preset the time.
self.__update_timer.expiration_time += (time_offset / 1000)
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
self.__light_sensor_logger = self.__create_logger("LightSensor")
self.__init_registers()
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
self.__init_registers()
self.__set_voltages(0, 0)
class TemplatePlugin(BasePlugin):
"""Template plugin controller."""
#region Attributes
__logger = None
"""Logger"""
__update_timer = None
"""Update timer."""
#endregion
#region Private Methods
def __do_job(self):
"""Do the JOB method."""
self.__logger.info("Do some job.")
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
def _update(self):
"""Update the plugin.
"""
# Update the timer.
self.__update_timer.update()
if self.__update_timer.expired:
self.__update_timer.clear()
self.__do_job()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(
self.name, self.__identifier))
self.__sun_spot_update_timer = Timer(2)
self.__init_registers()
if not self.__blind_mechanism is None:
self.__blind_mechanism.set_position(90)
def _init(self):
"""Initialize the plugin.
"""
# Create logger.
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(
self.name, self.__identifier))
# Setup open timer to 10 seconds.
self.__open_timer = Timer(10)
# Setup presence timer to 60 seconds.
self.__presence_timer = Timer(60)
self.__init_registers()
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__demand_timer = Timer(3600)
# Init cold water flow meter.
self.__init_cw()
# Init hot water flow meter.
self.__init_hw()
# Init power analyser.
self.__init_pa()
def __init__(self, **config):
"""Constructor"""
super().__init__(config)
self._vendor = "POLYGONTeam"
self._model = "Blind"
self.__logger = get_logger(__name__)
self.__blinds_state = StateMachine(BlindsState.Wait)
self.__move_timer = Timer()
self.__calibration_state = StateMachine(CalibrationState.NONE)
options = self._config["options"]
if "output_cw" in options:
self.__output_cw = options["output_cw"]
if "output_ccw" in options:
self.__output_ccw = options["output_ccw"]
if "feedback" in options:
self.__input_fb = options["feedback"]
if "feedback_tresh" in options:
self.__feedback_treshold = options["feedback_tresh"]
if "deg_per_sec" in options:
self.__deg_per_sec = options["deg_per_sec"]
# Set the feedback type.
if self.__input_fb.startswith("AI"):
self.__feedback_type = FeedbackType.Analog
elif self.__input_fb.startswith("DI"):
self.__feedback_type = FeedbackType.Digital
else:
GlobalErrorHandler.log_missing_resource(self.__logger, "{}: feedback not set correct or incomparable. Check feedback settings.".format(self.name))
def __init_erp(self):
"""Setup the ERP.
"""
# Take ERP info from settings.
erp_host = self.__app_settings.get_erp_service["host"]
erp_timeout = self.__app_settings.get_erp_service["timeout"]
# Create ERP.
self.__erp = bgERP(host=erp_host, timeout=erp_timeout)
# Set callbacks.
self.__erp.set_registers_cb(
get_cb=self.__erp_get_registers,
set_cb=self.__erp_set_registers)
# Set the ERP update timer.
self.__erp_service_update_timer = Timer(self.__erp_service_update_rate)
# Set zone state machine.
self.__erp_state_machine = StateMachine()
self.__erp_state_machine.on_change(self.__on_erp_state_change_cb)
self.__erp_state_machine.set_state(ERPState.NONE)
def _init(self):
"""Initialize the plugin.
"""
# Create logger.
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
# Status LED blink timer.
self.__blink_timer = Timer(1)
# Colission detection.
self.__collission_timer = Timer(1)
# Create disc check timer.
self.__disc_status_timer = Timer(10)
self.__init_registers()
self.__setup_rules()
class Zone(BasePlugin):
"""Air conditioner control logic.
"""
#region Attributes
__logger = None
"""Logger"""
__identifier = 0
"""Number identifier."""
__temp_proc = None
"""Temperature processor."""
__air_temp_upper_dev = None
"""Air thermometer upper."""
__air_temp_cent_dev = None
"""Air thermometer central."""
__air_temp_lower_dev = None
"""Air thermometer lower."""
__queue_temperatures = None
"""Queue of the temperatures."""
__convector_dev = None
"""Convector device."""
__loop1_temp_dev = None
"""Loop 2 thermometer."""
__loop1_valve_dev = None
"""Loop 1 valve device."""
__loop1_flowmeter = None
"""Loop 1 flow metter."""
__loop1_leak_test = None
"""Loop 1 leak test."""
__loop2_temp_dev = None
"""Loop 2 thermometer."""
__loop2_valve_dev = None
"""Loop 2 valve device."""
__loop2_flowmeter = None
"""Loop 2 flow metter."""
__loop2_leak_teat = None
"""Loop 2 leak test."""
__update_timer = None
"""Main process update timer."""
__stop_timer = None
"""Stop timer."""
__thermal_mode = None
"""Thermal mode of the HVAC."""
__thermal_force_limit = 0
"""Limit thermal force."""
__delta_time = 1
"""Конфигурационен параметър, показващ за какво време
назад се отчита изменението на температурата.
Limits: (1 - 3)"""
__adjust_temp = 0
"""Зададено отклонение от температурата
(задава се от дисплея до вратата или през мобилен телефон, вързан в локалната мрежа)
Limits: (-2.5 : 2.5)"""
__goal_building_temp = 0
"""Целева температура на сградата.
(подава се от централния сървър)
Limits: (18-26)"""
__delta_temp = 0
"""Изменението на температурата от последните минути.
Limits: (-3 : 3)"""
__thermal_force = 0
"""Каква топлинна сила трябва да приложим към системата
(-100% означава максимално да охлаждаме, +100% - максимално да отопляваме)"""
__stop_flag = False
"""HVAC Stop flag."""
__window_closed_input = verbal_const.OFF
"""Window closed sensor input."""
#endregion
#region Constructor / Destructor
def __init__(self, **config):
"""Constructor"""
super().__init__(config)
if "identifier" in config:
self.__identifier = config["identifier"]
def __del__(self):
"""Destructor"""
if self.__loop1_temp_dev is not None:
del self.__loop1_temp_dev
if self.__loop1_valve_dev is not None:
del self.__loop1_valve_dev
if self.__loop1_flowmeter is not None:
del self.__loop1_flowmeter
if self.__loop2_temp_dev is not None:
del self.__loop2_temp_dev
if self.__loop2_valve_dev is not None:
del self.__loop2_valve_dev
if self.__loop2_flowmeter is not None:
del self.__loop2_flowmeter
if self.__thermal_mode is not None:
del self.__thermal_mode
if self.__update_timer is not None:
del self.__update_timer
if self.__stop_timer is not None:
del self.__stop_timer
if self.__loop1_leak_test is not None:
del self.__loop1_leak_test
if self.__loop2_leak_teat is not None:
del self.__loop2_leak_teat
if self.__queue_temperatures is not None:
del self.__queue_temperatures
super().__del__()
if self.__logger is not None:
del self.__logger
#endregion
#region Properties
@property
def temperature(self):
"""Measure temperature from the sensors.
Средна температура на стаята.
(измерва се от датчиците)
Limits: (0-40)
Returns
-------
float
Actual temperature in the room.
"""
# return the temperature.
return self.__temp_proc.value
#endregion
#region Private Methods (Registers Parameters)
def __update_rate_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
# Check value.
if register.value < 0:
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__update_timer.expiration_time != register.value:
self.__update_timer.expiration_time = register.value
def __delta_time_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
# Check value.
if register.value < 0:
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__delta_time != register.value:
self.__delta_time = register.value
def __thermal_mode_cb(self, register):
# Check data type.
if not register.data_type == "int":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
mode = ThermalMode(register.value)
self.__thermal_mode.set_state(mode)
def __thermal_force_limit_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
# Check value.
if register.value < 0:
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value > 100:
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__thermal_force_limit = register.value
def __adjust_temp_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if self.__adjust_temp == register.value:
return
# @see https://experta.bg/L/S/122745/m/Fwntindd
min_temp = 2.5
max_temp = -2.5
min_temp_reg = self._registers.by_name("{}.temp_{}.min".format(self.key, self.__identifier))
if min_temp_reg is not None:
min_temp = min_temp_reg.value
max_temp_reg = self._registers.by_name("{}.temp_{}.max".format(self.key, self.__identifier))
if max_temp_reg is not None:
max_temp = max_temp_reg.value
actual_temp = register.value
if actual_temp < min_temp:
actual_temp = min_temp
if actual_temp > max_temp:
actual_temp = max_temp
self.__adjust_temp = actual_temp
def __goal_building_temp_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
# @see https://experta.bg/L/S/122745/m/Fwntindd
min_temp = 18
max_temp = 26
actual_temp = register.value
if actual_temp < min_temp:
actual_temp = min_temp
if actual_temp > max_temp:
actual_temp = max_temp
if self.__goal_building_temp != actual_temp:
self.__goal_building_temp = actual_temp
def __window_closed_input_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__window_closed_input = register.value
#endregion
#region Private Methods (Registers Thermometers)
def __air_temp_cent_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value != {} and self.__air_temp_cent_dev is None:
self.__air_temp_cent_dev = ThermometersFactory.create(
name="Air temperature center",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__air_temp_cent_dev is not None:
self.__air_temp_cent_dev.init()
self.__temp_proc.add(self.__air_temp_cent_dev)
elif register.value == {} and self.__air_temp_cent_dev is not None:
self.__temp_proc.add(self.__air_temp_cent_dev)
self.__air_temp_cent_dev.shutdown()
del self.__air_temp_cent_dev
def __air_temp_lower_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value != {} and self.__air_temp_lower_dev is None:
self.__air_temp_lower_dev = ThermometersFactory.create(
controller=self._controller,
name="Air temperature lower",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__air_temp_lower_dev is not None:
self.__air_temp_lower_dev.init()
self.__temp_proc.add(self.__air_temp_lower_dev)
elif register.value == {} and self.__air_temp_lower_dev is not None:
self.__temp_proc.remove(self.__air_temp_lower_dev)
self.__air_temp_lower_dev.shutdown()
del self.__air_temp_lower_dev
def __air_temp_upper_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value != {} and self.__air_temp_upper_dev is None:
self.__air_temp_upper_dev = ThermometersFactory.create(
controller=self._controller,
name="Air temperature upper",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__air_temp_upper_dev is not None:
self.__air_temp_upper_dev.init()
self.__temp_proc.add(self.__air_temp_upper_dev)
elif register.value == {} and self.__air_temp_upper_dev is not None:
self.__temp_proc.remove(self.__air_temp_upper_dev)
self.__air_temp_upper_dev.shutdown()
del self.__air_temp_upper_dev
#endregion
#region Private Methods (Registers Convector)
def __convector_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__convector_dev is None:
self.__convector_dev = ConvectorsFactory.create(
name="Convector {}".format(self.__identifier),
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__convector_dev is not None:
self.__convector_dev.init()
elif register.value == {} and self.__convector_dev is not None:
self.__convector_dev.shutdown()
del self.__convector_dev
#endregion
#region Private Methods (Registers Loop 1)
def __loop1_flowmeter_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop1_flowmeter is None:
self.__loop1_flowmeter = FlowmetersFactory.create(
name="Loop 1 flowmeter",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop1_flowmeter is not None:
self.__loop1_flowmeter.init()
# 20 seconds is time for leak testing.
self.__loop1_leak_test = LeakTest(self.__loop1_flowmeter, 20)
self.__loop1_leak_test.on_result(self.__loop1_leaktest_result)
elif register.value == {} and self.__loop1_flowmeter is not None:
self.__loop1_flowmeter.shutdown()
del self.__loop1_flowmeter
del self.__loop1_leak_test
def __loop1_temp_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop1_temp_dev is None:
self.__loop1_temp_dev = ThermometersFactory.create(
controller=self._controller,
name="Loop 1 temperature",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop1_temp_dev is not None:
self.__loop1_temp_dev.init()
elif register.value == {} and self.__loop1_temp_dev is not None:
self.__loop1_temp_dev.shutdown()
del self.__loop1_temp_dev
def __loop1_valve_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop1_valve_dev is None:
self.__loop1_valve_dev = ValveFactory.create(
name="Loop 1 valve",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop1_valve_dev is not None:
self.__loop1_valve_dev.init()
elif register.value == {} and self.__loop1_valve_dev is not None:
self.__loop1_valve_dev.shutdown()
del self.__loop1_valve_dev
#endregion
#region Private Methods (Registers Loop 2)
def __loop2_flowmeter_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop2_flowmeter is None:
self.__loop2_flowmeter = FlowmetersFactory.create(
name="Loop 2 flowmeter",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop2_flowmeter is not None:
self.__loop2_flowmeter.init()
self.__loop2_leak_teat = LeakTest(self.__loop2_flowmeter, 20)
self.__loop2_leak_teat.on_result(self.__loop2_leaktest_result)
elif register.value == {} and self.__loop2_flowmeter is not None:
self.__loop2_flowmeter.shutdown()
del self.__loop2_flowmeter
del self.__loop2_leak_teat
def __loop2_temp_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop2_temp_dev is None:
self.__loop2_temp_dev = ThermometersFactory.create(
controller=self._controller,
name="Loop 2 temperature",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop2_temp_dev is not None:
self.__loop2_temp_dev.init()
elif register.value == {} and self.__loop2_temp_dev is not None:
self.__loop2_temp_dev.shutdown()
del self.__loop2_temp_dev
def __loop2_valve_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
if register.value != {} and self.__loop2_valve_dev is None:
self.__loop2_valve_dev = ValveFactory.create(
name="Loop 2 valve",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__loop2_valve_dev is not None:
self.__loop2_valve_dev.init()
elif register.value == {} and self.__loop2_valve_dev is not None:
self.__loop2_valve_dev.shutdown()
del self.__loop2_valve_dev
#endregion
#region Private Methods (Registers envm)
def __envm_energy_cb(self, register):
# Check data type.
if not ((register.data_type == "int") or (register.data_type == "float")):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
# TODO: Get energy mode for the building.
pass
#endregion
#region Private Methods (Ventilation Interface)
def __set_ventilation(self, value):
# Set the ventilation.
self._registers.write("vent.hvac_setpoint_{}".format(self.__identifier), value)
#endregion
#region Private Methods (Registers Interface)
def __init_registers(self):
"""Initialize the registers callbacks.
"""
# Air temperatures.
air_temp_cent_settings = self._registers.by_name("{}.air_temp_cent_{}.settings".format(self.key, self.__identifier))
if air_temp_cent_settings is not None:
air_temp_cent_settings.update_handlers = self.__air_temp_cent_settings_cb
air_temp_cent_settings.update()
air_temp_lower_settings = self._registers.by_name("{}.air_temp_lower_{}.settings".format(self.key, self.__identifier))
if air_temp_lower_settings is not None:
air_temp_lower_settings.update_handlers = self.__air_temp_lower_settings_cb
air_temp_lower_settings.update()
air_temp_upper_settings = self._registers.by_name("{}.air_temp_upper_{}.settings".format(self.key, self.__identifier))
if air_temp_upper_settings is not None:
air_temp_upper_settings.update_handlers = self.__air_temp_upper_settings_cb
air_temp_upper_settings.update()
# Convector
convector_enable = self._registers.by_name("{}.convector_{}.settings".format(self.key, self.__identifier))
if convector_enable is not None:
convector_enable.update_handlers = self.__convector_settings_cb
convector_enable.update()
# Loop 1
loop1_flowmeter = self._registers.by_name("{}.loop1_{}.flowmeter.settings".format(self.key, self.__identifier))
if loop1_flowmeter is not None:
loop1_flowmeter.update_handlers = self.__loop1_flowmeter_settings_cb
loop1_flowmeter.update()
loop1_temp_settings = self._registers.by_name("{}.loop1_{}.temp.settings".format(self.key, self.__identifier))
if loop1_temp_settings is not None:
loop1_temp_settings.update_handlers = self.__loop1_temp_settings_cb
loop1_temp_settings.update()
loop1_valve_enabled = self._registers.by_name("{}.loop1_{}.valve.settings".format(self.key, self.__identifier))
if loop1_valve_enabled is not None:
loop1_valve_enabled.update_handlers = self.__loop1_valve_settings_cb
loop1_valve_enabled.update()
# Loop 2
loop2_flowmeter_settings = self._registers.by_name("{}.loop2_{}.flowmeter.settings".format(self.key, self.__identifier))
if loop2_flowmeter_settings is not None:
loop2_flowmeter_settings.update_handlers = self.__loop2_flowmeter_settings_cb
loop2_flowmeter_settings.update()
loop2_temp_settings = self._registers.by_name("{}.loop2_{}.temp.settings".format(self.key, self.__identifier))
if loop2_temp_settings is not None:
loop2_temp_settings.update_handlers = self.__loop2_temp_settings_cb
loop2_temp_settings.update()
loop2_valve_settings = self._registers.by_name("{}.loop2_{}.valve.settings".format(self.key, self.__identifier))
if loop2_valve_settings is not None:
loop2_valve_settings.update_handlers = self.__loop2_valve_settings_cb
loop2_valve_settings.update()
# Create window closed sensor.
window_closed_input = self._registers.by_name("{}.window_closed_{}.input".format("ac", self.__identifier))
if window_closed_input is not None:
window_closed_input.update_handlers = self.__window_closed_input_cb
window_closed_input.update()
# Region parameters
update_rate = self._registers.by_name("{}.update_rate_{}".format(self.key, self.__identifier))
if update_rate is not None:
update_rate.update_handlers = self.__update_rate_cb
update_rate.update()
delta_time = self._registers.by_name("{}.delta_time_{}".format(self.key, self.__identifier))
if delta_time is not None:
delta_time.update_handlers = self.__delta_time_cb
delta_time.update()
thermal_mode = self._registers.by_name("{}.thermal_mode_{}".format(self.key, self.__identifier))
if thermal_mode is not None:
thermal_mode.update_handlers = self.__thermal_mode_cb
thermal_mode.update()
thermal_force_limit = self._registers.by_name("{}.thermal_force_limit_{}".format(self.key, self.__identifier))
if thermal_force_limit is not None:
thermal_force_limit.update_handlers = self.__thermal_force_limit_cb
thermal_force_limit.update()
adjust_temp = self._registers.by_name("{}.adjust_temp_{}".format(self.key, self.__identifier))
if adjust_temp is not None:
adjust_temp.update_handlers = self.__adjust_temp_cb
adjust_temp.update()
goal_building_temp = self._registers.by_name("{}.goal_building_temp".format(self.key))
if goal_building_temp is not None:
goal_building_temp.update_handlers = self.__goal_building_temp_cb
goal_building_temp.update()
# Get the power mode of the building.
envm_energy = self._registers.by_name("envm.energy")
if envm_energy is not None:
envm_energy.update_handlers = self.__envm_energy_cb
envm_energy.update()
def __update_thermometers_values(self):
# 1. If thermometer is available, gets its value.
air_temp_lower_value = 0
if self.__air_temp_lower_dev is not None:
air_temp_lower_value = self.__air_temp_lower_dev.get_temp()
# 1. If thermometer is available, gets its value.
air_temp_cent_value = 0
if self.__air_temp_cent_dev is not None:
air_temp_cent_value = self.__air_temp_cent_dev.get_temp()
# 1. If thermometer is available, gets its value.
air_temp_upper_value = 0
if self.__air_temp_upper_dev is not None:
air_temp_upper_value = self.__air_temp_upper_dev.get_temp()
# 1. If thermometer is available, gets its value.
loop1_temp_value = 0
if self.__loop1_temp_dev is not None:
loop1_temp_value = self.__loop1_temp_dev.get_temp()
# 1. If thermometer is available, gets its value.
loop2_temp_value = 0
if self.__loop2_temp_dev is not None:
loop2_temp_value = self.__loop2_temp_dev.get_temp()
# 2. If the folowing register is available then set ist value to the thermometers value.
self._registers.write("{}.air_temp_lower_{}.value".format(self.key, self.__identifier), air_temp_lower_value)
# 2. If the folowing register is available then set ist value to the thermometers value.
self._registers.write("{}.air_temp_cent_{}.value".format(self.key, self.__identifier), air_temp_cent_value)
# 2. If the folowing register is available then set ist value to the thermometers value.
self._registers.write("{}.air_temp_upper_{}.value".format(self.key, self.__identifier), air_temp_upper_value)
# 2. If the folowing register is available then set ist value to the thermometers value.
self._registers.write("{}.loop1_{}.temp.value".format(self.key, self.__identifier), loop1_temp_value)
# 2. If the folowing register is available then set ist value to the thermometers value.
self._registers.write("{}.loop2_{}.temp.value".format(self.key, self.__identifier), loop2_temp_value)
def __is_empty(self):
value = False
is_empty = self._registers.by_name("envm.is_empty")
if is_empty is not None:
value = is_empty.value
return value
def __get_down_limit_temp(self):
# Request: Eml6419
value = 10
down_limit = self._registers.by_name("{}.loop1_{}.temp.down_limit".format(self.key, self.__identifier))
if down_limit is not None:
down_limit_value = down_limit.value
return value
#endregion
#region Private Methods (PLC)
def __read_window_tamper(self):
state = False
if self._controller.is_valid_gpio(self.__window_closed_input):
state = self._controller.digital_read(self.__window_closed_input)
if self.__window_closed_input == verbal_const.OFF:
state = True
return state
#endregion
#region Private Methods (Leak tests)
def __loop1_leaktest_result(self, leaked_liters):
if leaked_liters > 0:
self.__logger.error("Loop 1 leak detected liters: {}".format(leaked_liters))
def __loop2_leaktest_result(self, leaked_liters):
if leaked_liters > 0:
self.__logger.error("Loop 2 leak detected liters: {}".format(leaked_liters))
#endregion
#region Private Methods
def __is_hot_water(self):
down_limit_value = self.__get_down_limit_temp()
temperature = 0
if self.__loop1_temp_dev is not None:
temperature = self.__loop1_temp_dev.get_temp()
return temperature >= down_limit_value
def __thermal_mode_on_change(self, machine):
self.__logger.info("Thermal mode: {}".format(machine.get_state()))
def __set_thermal_force(self, thermal_force):
""" Apply thermal force to the devices. """
# 6. Ако модула на пределната термална сила е по-малък от модула на термалната сила,
# тогава Термалата сила = Пределната термала сила
if thermal_force > abs(self.__thermal_force_limit):
thermal_force = self.__thermal_force_limit
elif thermal_force < -abs(self.__thermal_force_limit):
thermal_force = -abs(self.__thermal_force_limit)
# 7. Лимитираме Термалната сила в интервала -100 : + 100:
if thermal_force < -100:
thermal_force = -100
if thermal_force > 100:
thermal_force = 100
self.__logger.debug("Mode: {}; TForce: {:3.3f}"\
.format(self.__thermal_mode.get_state(), thermal_force))
if self.__thermal_mode.is_state(ThermalMode.ColdSeason):
if thermal_force > 0:
self.__loop1_valve_dev.target_position = 0
self.__loop2_valve_dev.target_position = 0
elif thermal_force <= 0:
self.__loop1_valve_dev.target_position = 100
self.__loop2_valve_dev.target_position = 100
elif self.__thermal_mode.is_state(ThermalMode.TransisionSeason):
if thermal_force < 0:
self.__loop1_valve_dev.target_position = 100
self.__loop2_valve_dev.target_position = 0
elif thermal_force > 0:
self.__loop1_valve_dev.target_position = 0
self.__loop2_valve_dev.target_position = 100
else:
self.__loop1_valve_dev.target_position = 0
self.__loop2_valve_dev.target_position = 0
elif self.__thermal_mode.is_state(ThermalMode.WarmSeason):
if thermal_force < 0:
self.__loop1_valve_dev.target_position = 100
self.__loop2_valve_dev.target_position = 100
elif thermal_force > 0:
self.__loop1_valve_dev.target_position = 0
self.__loop2_valve_dev.target_position = 0
# If thermal mode set properly apply thermal force
if not self.__thermal_mode.is_state(ThermalMode.NONE):
self.__set_ventilation(thermal_force)
# Set convector fan.
conv_tf = l_scale(thermal_force, [0, 100], [0, 3])
conv_tf = abs(conv_tf)
conv_tf = int(conv_tf)
self.__convector_dev.set_state(conv_tf)
#endregion
#region Protected Methods
def _init(self):
"""Initialize the module.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(self.name, self.__identifier))
# Create thermal mode.
self.__thermal_mode = StateMachine(ThermalMode.NONE)
self.__thermal_mode.on_change(self.__thermal_mode_on_change)
# Create update timer.
self.__update_timer = Timer(5)
# Stop timer.
self.__stop_timer = Timer(10)
# Create temperature processor.
self.__temp_proc = TemperatureProcessor()
# Create temperature queue.
self.__queue_temperatures = deque([], maxlen=20)
# Create registers callbacks.
self.__init_registers()
# Shutting down all the devices.
self.__set_thermal_force(0)
def _update(self):
""" Update cycle.
"""
# Update thermometres values.
self.__update_thermometers_values()
# Update occupation flags.
is_empty = self.__is_empty()
# If the window is opened, just turn off the HVAC.
window_tamper_state = self.__read_window_tamper()
# If temperature is less then 10 deg on loop 1.
is_hot_water = self.__is_hot_water()
# Take all necessary condition for normal operation of the HVAC.
# stop_flag = (not is_empty or not window_tamper_state or not is_hot_water)
stop_flag = False
if stop_flag:
self.__stop_timer.update()
if self.__stop_timer.expired:
self.__stop_timer.clear()
if self.__stop_flag != stop_flag:
self.__stop_flag = stop_flag
self.__set_thermal_force(0)
if not stop_flag:
self.__stop_flag = False
self.__stop_timer.update_last_time()
# Main update rate at ~ 20 second.
# На всеки 20 секунди се правят следните стъпки:
self.__update_timer.update()
if self.__update_timer.expired and not self.__stop_flag:
self.__update_timer.clear()
# Recalculate the temperatures.
self.__temp_proc.update()
crg_temp = 0
expected_room_temp = 0
# Update current room temperature.
temperature = self.temperature
# Add temperature to the queue.
self.__queue_temperatures.append(temperature)
self.__logger.debug("ROOM: {:3.3f}".format(temperature))
# 1. Изчислява се целевата температура на стаята:
goal_room_temp = self.__goal_building_temp + self.__adjust_temp
# 2. Изчислява се очакваната температура на стаята:
expected_room_temp = temperature + self.__delta_temp
# 3. Намира се коригиращата разлика между
# Целевата температура и Очакваната температура на стаята:
crg_temp = goal_room_temp - expected_room_temp
self.__logger.debug("GRT {:3.3f}\t ERT {:3.3f}\t CRG: {:3.3f}"\
.format(goal_room_temp, expected_room_temp, crg_temp))
# 4.
# Колкото е по-отрицателна температурата, толкова повече трябва да охлаждаме,
# колкото е по-положителна - толкова повече трябва да отопляваме.
# Определяме минималната термална сила, на база Корекционната температура:
#self.__thermal_force_limit = aprox(-5 => -100, 5 => 100)
# 5. Интегрираме термалната сила:
self.__thermal_force += crg_temp
# Apply the integrated force.
self.__set_thermal_force(self.__thermal_force)
if self.__loop1_valve_dev is not None:
if self.__loop1_valve_dev.current_position <= 0:
if self.__loop1_leak_test is not None:
self.__loop1_leak_test.run()
if self.__loop2_valve_dev is not None:
if self.__loop2_valve_dev.current_position <= 0:
if self.__loop2_leak_teat is not None:
self.__loop2_leak_teat.run()
self._registers.write("{}.temp_{}.actual".format(self.key, self.__identifier), temperature)
# Recalculate delta time.
# pass_time = time.time() - self.__lastupdate_delta_time
# if pass_time > self.__delta_time:
# self.__delta_temp = temperature - self.__delta_temp
# self.__logger.debug("DT: {:3.3f}".format(self.__delta_temp))
# # Update current time.
# self.__lastupdate_delta_time = time.time()
self.__loop1_valve_dev.update()
self.__loop2_valve_dev.update()
self.__convector_dev.update()
def _shutdown(self):
"""Shutdown the tamper.
"""
self.__logger.info("Shutting down the {} {}".format(self.name, self.__identifier))
self.__set_thermal_force(0)
if not self.__loop1_valve_dev is None:
self.__loop1_valve_dev.shutdown()
if not self.__loop2_valve_dev is None:
self.__loop2_valve_dev.shutdown()
if not self.__convector_dev is None:
self.__convector_dev.shutdown()
class Statistics(BasePlugin):
"""Template plugin controller."""
#region Attributes
__logger = None
"""Logger"""
__update_timer = None
"""Update timer."""
__light_sensor = None
"""Light sensor target.
"""
#endregion
#region Private Methods
def __get_todays_path(self, name=""):
# Current file path.
cwf = os.path.dirname(os.path.abspath(__file__))
# Statistics path.
full_dir_path = os.path.join(cwf, "..", "..", "..", "statistics")
# Crete log directory.
if not os.path.exists(full_dir_path):
os.makedirs(full_dir_path)
# Todays filename.
todays_file_name = strftime("%Y%m%d_%H%M%S", gmtime())
if not name != "":
todays_file_name += "_"
todays_file_name += name
todays_file_name += ".log"
# File name.
file_name = os.path.join(full_dir_path, todays_file_name)
return file_name
def __create_logger(self, name, level=logging.INFO):
"""To setup as many loggers as you want"""
log_file = self.__get_todays_path(name)
# Formater
# log_format = "%(asctime)s\t%(levelname)s\t%(name)s\t%(lineno)s\t%(message)s"
log_format = "%(asctime)s\t%(name)s\t%(message)s"
formatter = logging.Formatter(log_format)
# Handler
handler = logging.FileHandler(log_file)
handler.setFormatter(formatter)
# Logger
logger = logging.getLogger(name)
logger.setLevel(level)
logger.addHandler(handler)
return logger
def __periodic_job(self):
"""Do the JOB method."""
if self.__light_sensor is not None:
self.__light_sensor.update()
measured_value = self.__light_sensor.get_value()
if self.__light_sensor_logger is not None:
self.__light_sensor_logger.info("{}".format(measured_value))
#endregion
#region Private Methods (Registers Interface)
def __light_sensor_settings_cb(self, register: Register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value != None and self.__light_sensor is None:
dev_name = "{} {}".format("Test sensor", self.name)
self.__light_sensor = LuxmeterFactory.create(
name=dev_name,
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__light_sensor is not None:
self.__light_sensor.init()
def __init_registers(self):
sensor_enabled = self._registers.by_name("light.sensor.settings")
if sensor_enabled is not None:
sensor_enabled.update_handlers = self.__light_sensor_settings_cb
sensor_enabled.update()
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
self.__light_sensor_logger = self.__create_logger("LightSensor")
self.__init_registers()
def _update(self):
"""Update the plugin.
"""
# Update the timer.
self.__update_timer.update()
if self.__update_timer.expired:
self.__update_timer.clear()
self.__periodic_job()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
def __init__(self, flowmeter, test_time):
self.__flowmeter_dev = flowmeter
self.__test_state = StateMachine(TestState.TakeFirstMeasurement)
self.__check_timer = Timer(test_time)
class Sys(BasePlugin):
"""Blinds controller device."""
#region Attributes
__logger = None
"""Logger"""
__led_state = 0
"""LED State."""
__blink_timer = None
"""Update timestamp."""
__led_out = verbal_const.OFF
"""LED Output"""
__collission_timer = None
"""Update timer."""
__rules = None
"""Rules"""
__enable_info_msg = True
"""Enable info messages."""
__enable_wrn_msg = True
"""Enable warning messages."""
__enable_err_msg = True
"""Enable error messages."""
__disc_status_timer = None
"""Disc check timer."""
#endregion
#region Destructor
def __del__(self):
if self.__blink_timer is not None:
del self.__blink_timer
super().__del__()
if self.__logger is not None:
del self.__logger
#endregion
#region Private Methods (Status LED)
def __set_led(self, state):
if self._controller.is_valid_gpio(self.__led_out):
self._controller.set_led(self.__led_out, state)
#endregion
#region Private Methods (Colision Detection)
def __setup_rules(self):
self.__rules = Rules()
# GPIOs
for index in range(12):
self.__rules.add(Rule("DO{}".format(index), MonitoringLevel.Error))
self.__rules.add(Rule("DI{}".format(index), MonitoringLevel.Warning))
self.__rules.add(Rule("AO{}".format(index), MonitoringLevel.Error))
self.__rules.add(Rule("AI{}".format(index), MonitoringLevel.Warning))
self.__rules.add(Rule("RO{}".format(index), MonitoringLevel.Error))
# 1 Wire devices
ow_devices = self._controller.get_1w_devices()
for ow_device in ow_devices:
self.__rules.add(Rule(ow_device["circuit"], MonitoringLevel.Info))
# Serial Ports
if os.name == "nt":
for index in range(1, 11):
self.__rules.add(Rule("COM{}".format(index), MonitoringLevel.Error))
elif os.name == "posix":
for index in range(0, 11):
self.__rules.add(Rule("/dev/ttyS{}".format(index), MonitoringLevel.Error))
self.__rules.add(Rule("/dev/ttyUSB{}".format(index), MonitoringLevel.Error))
self.__rules.add(Rule("/dev/ttyACM{}".format(index), MonitoringLevel.Error))
# Add event.
self.__rules.on_event(self.__on_event)
def __on_event(self, intersections, rule: Rule):
"""On event callback for collisions."""
level = MonitoringLevel(rule.level)
if level == MonitoringLevel.Debug:
self.__logger.debug("Debug")
self.__logger.debug(intersections)
if level == MonitoringLevel.Info and self.__enable_info_msg:
self._registers.write("{}.col.info_message".format(self.key), intersections)
if level == MonitoringLevel.Warning and self.__enable_wrn_msg:
self._registers.write("{}.col.warning_message".format(self.key), intersections)
if level == MonitoringLevel.Error and self.__enable_err_msg:
self._registers.write("{}.col.error_message".format(self.key), intersections)
#endregion
#region Private Methods (Registers Interface)
def __blink_time_cb(self, register):
# Check data type.
if not (register.data_type == "int" or register.data_type == "float"):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__blink_timer.expiration_time = register.value
def __led_out_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__led_out = register.value
def __clear_errors_cb(self, register):
"""Clear errors callback."""
if register.value == 1:
# Clear the flag.
register.value = 0
# Clear info messages.
self._registers.write("{}.col.info_message".format(self.key), {})
# Clear warning messages.
self._registers.write("{}.col.warning_message".format(self.key), {})
# Clear error messages.
self._registers.write("{}.col.error_message".format(self.key), {})
def __enable_info_msg_cb(self, register):
# Check data type.
if not register.data_type == "bool":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__enable_info_msg = register.value
def __enable_wrn_msg_cb(self, register):
# Check data type.
if not register.data_type == "bool":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__enable_wrn_msg = register.value
def __enable_err_msg_cb(self, register):
# Check data type.
if not register.data_type == "bool":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, register)
return
self.__enable_err_msg = register.value
def __init_registers(self):
# Status LED blink time.
blink_time = self._registers.by_name(self.key + ".sl.blink_time")
if blink_time is not None:
blink_time.update_handlers = self.__blink_time_cb
blink_time.update()
# Status LED output.
output = self._registers.by_name(self.key + ".sl.output")
if output is not None:
output.update_handlers = self.__led_out_cb
output.update()
clear_errors = self._registers.by_name(self.key + ".col.clear_errors")
if clear_errors is not None:
clear_errors.update_handlers = self.__clear_errors_cb
clear_errors.value = 1
# Enable info messages.
enable_info_msg = self._registers.by_name(self.key + ".col.info_message.enable")
if enable_info_msg is not None:
enable_info_msg.update_handlers = self.__enable_info_msg_cb
enable_info_msg.update()
# Enable warning messages.
enable_wrn_msg = self._registers.by_name(self.key + ".col.warning_message.enable")
if enable_wrn_msg is not None:
enable_wrn_msg.update_handlers = self.__enable_wrn_msg_cb
enable_wrn_msg.update()
# Enable error messages.
enable_err_msg = self._registers.by_name(self.key + ".col.error_message.enable")
if enable_err_msg is not None:
enable_err_msg.update_handlers = self.__enable_err_msg_cb
enable_err_msg.update()
def __update_disc_space(self):
total, used, free = disk_size()
self._registers.write("sys.disc.total", total)
self._registers.write("sys.disc.used", used)
self._registers.write("sys.disc.free", free)
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
# Create logger.
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
# Status LED blink timer.
self.__blink_timer = Timer(1)
# Colission detection.
self.__collission_timer = Timer(1)
# Create disc check timer.
self.__disc_status_timer = Timer(10)
self.__init_registers()
self.__setup_rules()
def _update(self):
"""Update the plugin.
"""
# Update the Blink LED timer.
self.__blink_timer.update()
if self.__blink_timer.expired:
self.__blink_timer.clear()
if self.__led_state:
self.__led_state = 0
else:
self.__led_state = 1
# update the LED state.
self.__set_led(self.__led_state)
# Update the collision timer.
self.__collission_timer.update()
if self.__collission_timer.expired:
self.__collission_timer.clear()
# Check for collision.
self.__rules.check(self._registers)
# Update disc space.
self.__disc_status_timer.update()
if self.__disc_status_timer.expired:
self.__disc_status_timer.clear()
# Update the disck space registers.
self.__update_disc_space()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
self.__set_led(0)
class Zone(BasePlugin):
"""Security zone definition class."""
#region Attribute
__logger = None
"""Logger"""
__identifier = 0
"""Security zone identifier."""
__allowed_attendant = []
"""Allowed attendant."""
__free_to_lock = 0
"""Free to lock flag."""
__open_door_flag = 0
"""Open door flag."""
__open_timer = None
"""Open timer."""
__presence_timer = None
"""Presence timer"""
__on_card_cb = None
"""Reader read callback"""
__entry_reader = None
"""Entry card reader."""
__exit_reader = None
"""Exit card reader."""
__exit_btn_input = verbal_const.OFF # "DI0"
"""Exit button input."""
__window_closed_input = verbal_const.OFF
"""Window closed sensor input."""
__door_closed_input = verbal_const.OFF
"""Door closed sensor input."""
__pir_input = verbal_const.OFF
"""PIR closed sensor input."""
__lock_mechanism_output = verbal_const.OFF # "DO0"
"""Locking mechanism output."""
__door_window_blind_output = verbal_const.OFF
"""Door window blind output."""
#endregion
#region Constructor / Destructor
def __init__(self, **config):
"""Constructor"""
super().__init__(config)
if "identifier" in config:
self.__identifier = config["identifier"]
def __del__(self):
"""Destructor"""
if self.__entry_reader is not None:
del self.__entry_reader
if self.__exit_reader is not None:
del self.__exit_reader
if self.__open_timer is not None:
del self.__open_timer
super().__del__()
if self.__logger is not None:
del self.__logger
#endregion
#region Private Methods (Registers)
def __entry_reader_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
# Create
if register.value != {} and self.__entry_reader is None:
self.__entry_reader = CardReaderFactory.create(
controller=self._controller,
name="Entry Reader",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__entry_reader is not None:
if self.__entry_reader.reader_state == CardReaderState.NONE:
self.__entry_reader.cb_read_card(self.__cb_read_card)
self.__entry_reader.init()
# Delete
elif register.value == {} and self.__entry_reader is not None:
self.__delete_reader(self.__entry_reader)
def __exit_reader_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
# Create
if register.value != {} and self.__exit_reader is None:
self.__exit_reader = CardReaderFactory.create(
controller=self._controller,
name="Exit Reader",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__exit_reader is not None:
if self.__exit_reader.reader_state == CardReaderState.NONE:
self.__exit_reader.cb_read_card(self.__cb_read_card)
self.__exit_reader.init()
# Delete
elif register.value == {} and self.__exit_reader is not None:
self.__delete_reader(self.__exit_reader)
def __exit_btn_input_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__exit_btn_input = register.value
def __window_closed_input_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__window_closed_input = register.value
def __door_closed_input_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__door_closed_input = register.value
def __pir_input_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__pir_input = register.value
def __lock_mechanism_output_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__lock_mechanism_output = register.value
def __door_window_blind_output_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__door_window_blind_output = register.value
def __time_to_open_cb(self, register):
if not register.data_type == "int":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__open_timer.expiration_time = register.value
def __is_empty_timeout_cb(self, register):
# Check data type.
if not register.data_type == "int":
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
self.__presence_timer.expiration_time = register.value
def __door_window_blind_value_cb(self, register):
# Check data type.
if not register.data_type == "bool":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
self.__set_door_window_blind(register.value)
def __init_registers(self):
# Get time to open the latch.
time_to_open = self._registers.by_name("{}.time_to_open_{}".format(
self.key, self.__identifier))
if time_to_open is not None:
time_to_open.update_handlers = self.__time_to_open_cb
time_to_open.update()
# Is empty timeout.
is_empty_timeout = self._registers.by_name("envm.is_empty_timeout")
if is_empty_timeout is not None:
is_empty_timeout.update_handlers = self.__is_empty_timeout_cb
is_empty_timeout.update()
# Entry reader.
entry_reader_enabled = self._registers.by_name(
"{}.entry_reader_{}.enabled".format(self.key, self.__identifier))
if entry_reader_enabled is not None:
entry_reader_enabled.update_handlers = self.__entry_reader_cb
# Exit reader.
exit_reader_enabled = self._registers.by_name(
"{}.exit_reader_{}.enabled".format(self.key, self.__identifier))
if exit_reader_enabled is not None:
exit_reader_enabled.update_handlers = self.__exit_reader_cb
# Create exit button.
exit_button_input = self._registers.by_name(
"{}.exit_button_{}.input".format(self.key, self.__identifier))
if exit_button_input is not None:
exit_button_input.update_handlers = self.__exit_btn_input_cb
exit_button_input.update()
# Create window closed sensor.
window_closed_input = self._registers.by_name(
"{}.window_closed_{}.input".format(self.key, self.__identifier))
if window_closed_input is not None:
window_closed_input.update_handlers = self.__window_closed_input_cb
window_closed_input.update()
# Create door closed sensor.
door_closed_input = self._registers.by_name(
"{}.door_closed_{}.input".format(self.key, self.__identifier))
if door_closed_input is not None:
door_closed_input.update_handlers = self.__door_closed_input_cb
door_closed_input.update()
# Create PIR sensor.
pir_input = self._registers.by_name("{}.pir_{}.input".format(
self.key, self.__identifier))
if pir_input is not None:
pir_input.update_handlers = self.__pir_input_cb
pir_input.update()
# Create locking mechanism.
lock_mechanism_output = self._registers.by_name(
"{}.lock_mechanism_{}.output".format(self.key, self.__identifier))
if lock_mechanism_output is not None:
lock_mechanism_output.update_handlers = self.__lock_mechanism_output_cb
lock_mechanism_output.update()
# Door window blind.
door_window_blind_output = self._registers.by_name(
"{}.door_window_blind_{}.output".format(self.key,
self.__identifier))
if door_window_blind_output is not None:
door_window_blind_output.update_handlers = self.__door_window_blind_output_cb
door_window_blind_output.update()
# Door window blind.
self._registers.add_callback("{}.door_window_blind_{}.value".format(
self.key, self.__identifier),
self.__door_window_blind_value_cb,
update=True)
def __set_zone_occupied(self, value):
reg_occupation = self._registers.by_name("{}.zone_{}_occupied".format(
self.key, self.__identifier))
if reg_occupation is not None:
if reg_occupation.value != value:
reg_occupation.value = value
#endregion
#region Private Methods (Card Reader)
def __check_card_state(self, card_id):
# Request - Eml6287
card_state = CardState.NONE
allowed_len = len(self.__allowed_attendant)
checked_index = 0
for card in self.__allowed_attendant:
if card["card_id"] == card_id:
now = time.time()
if now < card["valid_until"]:
card_state = CardState.Allowed
break
else:
card_state = CardState.Expired
break
checked_index += 1
if checked_index == allowed_len and card_state == CardState.NONE:
card_state = CardState.NotAllowed
return card_state
def __cb_read_card(self, card_id, serial_number):
# Set flag to open the door.
card_state = self.__check_card_state(card_id)
if card_state == CardState.Allowed:
if self.__open_door_flag == 0:
self.__open_door_flag = 1
if self.__on_card_cb is not None:
self.__on_card_cb(card_id, serial_number, card_state.value)
def __delete_reader(self, reader):
if reader is not None:
reader.shutdown()
while reader.reader_state == CardReaderState.RUN:
pass
del reader
def __update_entry_reader(self):
"""Update entry reader state."""
if self.__entry_reader is not None:
# Update card reader.
self.__entry_reader.update()
if self.__entry_reader.reader_state == CardReaderState.STOP:
message = "Card reader {}; State {}; Port {}."\
.format(self.__entry_reader.serial_number, \
self.__entry_reader.reader_state, \
self.__entry_reader.port_name)
GlobalErrorHandler.log_hardware_malfunction(
self.__logger, message)
self.__entry_reader.init()
if self.__entry_reader.reader_state == CardReaderState.NONE:
message = "Card reader {}; State {}."\
.format(self.__entry_reader.serial_number, self.__entry_reader.reader_state)
GlobalErrorHandler.log_hardware_malfunction(
self.__logger, message)
self.__entry_reader.init()
def __update_exit_reader(self):
"""Update exit reader state."""
if self.__exit_reader is not None:
# Update card reader.
self.__exit_reader.update()
if self.__exit_reader.reader_state == CardReaderState.STOP:
message = "Card reader {}; State {}; Port {}."\
.format(self.__exit_reader.serial_number, \
self.__exit_reader.reader_state, \
self.__exit_reader.port_name)
GlobalErrorHandler.log_hardware_malfunction(
self.__logger, message)
self.__exit_reader.init()
if self.__exit_reader.reader_state == CardReaderState.NONE:
message = "Card reader {}; State {}."\
.format(self.__exit_reader.serial_number, self.__entry_reader.reader_state)
GlobalErrorHandler.log_hardware_malfunction(
self.__logger, message)
self.__exit_reader.init()
#endregion
#region (PLC)
def __read_exit_button(self):
state = False
if self._controller.is_valid_gpio(self.__exit_btn_input):
state = self._controller.digital_read(self.__exit_btn_input)
return state
def __read_window_tamper(self):
state = False
if self._controller.is_valid_gpio(self.__window_closed_input):
state = self._controller.digital_read(self.__window_closed_input)
return state
def __read_door_tamper(self):
state = False
if self._controller.is_valid_gpio(self.__door_closed_input):
state = self._controller.digital_read(self.__door_closed_input)
return state
def __read_pir_sensor(self):
state = False
if self._controller.is_valid_gpio(self.__pir_input):
state = self._controller.digital_read(self.__pir_input)
return state
def __set_lock_mechanism(self, value=0):
if self._controller.is_valid_gpio(self.__lock_mechanism_output):
self._controller.digital_write(self.__lock_mechanism_output, value)
def __set_door_window_blind(self, value=0):
if self._controller.is_valid_gpio(self.__door_window_blind_output):
self._controller.digital_write(self.__door_window_blind_output,
value)
#endregion
#region Protected Methods
def _init(self):
"""Initialize the plugin.
"""
# Create logger.
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(
self.name, self.__identifier))
# Setup open timer to 10 seconds.
self.__open_timer = Timer(10)
# Setup presence timer to 60 seconds.
self.__presence_timer = Timer(60)
self.__init_registers()
def _update(self):
"""Update the plugin.
"""
# Update inputs.
btn_state = self.__read_exit_button()
door_tamper_state = self.__read_door_tamper()
pir_sensor_state = self.__read_pir_sensor()
window_tamper_state = self.__read_window_tamper()
self.__update_entry_reader()
self.__update_exit_reader()
# Check if the button is pressed.
if btn_state:
if self.__open_door_flag == 0:
self.__open_door_flag = 1
# Check if the flag is raise.
if self.__open_door_flag == 1:
self.__set_lock_mechanism(1)
self.__set_door_window_blind(1)
self.__open_timer.update_last_time()
self.__open_door_flag = 0
self.__free_to_lock = 1
# Lock the door after when it is closed.
if door_tamper_state:
if self.__free_to_lock == 1:
self.__set_lock_mechanism(0)
self.__set_door_window_blind(0)
self.__free_to_lock = 0
# Check is it time to close the latch.
if self.__open_door_flag == 0:
self.__open_timer.update()
if self.__open_timer.expired:
self.__open_timer.clear()
if self.__free_to_lock == 1:
self.__set_lock_mechanism(0)
self.__set_door_window_blind(0)
self.__free_to_lock = 0
# If one of the sensor are activated, set occupation flag to true.
if door_tamper_state or pir_sensor_state or window_tamper_state:
self.__presence_timer.update_last_time()
self.__set_zone_occupied(True)
# Else, run the expiration timer.
else:
self.__presence_timer.update()
if self.__presence_timer.expired:
self.__presence_timer.clear()
self.__set_zone_occupied(False)
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {} {}".format(
self.name, self.__identifier))
self.__set_lock_mechanism(0)
self.__set_door_window_blind(0)
self.__delete_reader(self.__entry_reader)
self.__delete_reader(self.__exit_reader)
#endregion
#region Public Methods
def on_card(self, callback):
"""Set reader read calback."""
if callback is None:
return
self.__on_card_cb = callback
def add_allowed_attendant(self, card_id):
"""Add allowed attendant ID.
Parameters
----------
ids : str
Cards id.
"""
if card_id is None:
return
if card_id == "":
return
if card_id in self.__allowed_attendant:
pass
else:
self.__allowed_attendant.append(card_id)
def add_allowed_attendees(self, ids):
"""Add allowed attendees IDs.
Parameters
----------
ids : array
Cards id.
"""
if ids is None:
return
self.__allowed_attendant.clear()
for key in ids:
record = ids[key]
self.add_allowed_attendant(record)
class Blind(BasePlugin):
"""Blind controller device."""
#region Attributes
__logger = None
"""Logger"""
__identifier = 0
"""Identifier
"""
__blind_mechanism = None
"""Blkind mechanism
"""
__sun_spot_update_timer = None
"""Sun spot update timer.
"""
__sun_azm = 0
"""Sun azimuth.
"""
__sun_elev = 0
"""Sun elevation.
"""
__sun_spot_limit = 0
"""Sun spot limit.
"""
__object_height = 0
"""Object height [m]
"""
__zone_occupation = False
"""Zone occupation flag.
"""
#endregion
#region Constructor / Destructor
def __init__(self, **config):
"""Constructor"""
super().__init__(config)
if "identifier" in config:
self.__identifier = config["identifier"]
def __del__(self):
"""Destructor"""
super().__del__()
if self.__logger is not None:
del self.__logger
#endregion
#region Private Methods (Registers)
def __blind_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
# Create
if register.value != {} and self.__blind_mechanism is None:
self.__blind_mechanism = BlindsFactory.create(
controller=self._controller,
name="Blind",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__blind_mechanism is not None:
self.__blind_mechanism.init()
# Delete
elif register.value == {} and self.__blind_mechanism is not None:
del self.__blind_mechanism
def __position_cb(self, register):
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__blind_mechanism is not None:
self.__blind_mechanism.set_position(register.value)
def __object_height_cb(self, register):
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__object_height != register.value:
self.__object_height = register.value
def __sunspot_limit_cb(self, register):
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__sun_spot_limit != register.value:
self.__sun_spot_limit = register.value
def __zone_occupation_cb(self, register):
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int") or
(register.data_type == "bool")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__zone_occupation != register.value:
self.__zone_occupation = register.value
def __init_registers(self):
blind = self._registers.by_name("{}.blind_{}.mechanism".format(
self.key, self.__identifier))
if blind is not None:
blind.update_handlers = self.__blind_cb
blind.update()
position = self._registers.by_name("{}.blind_{}.position".format(
self.key, self.__identifier))
if position is not None:
position.update_handlers = self.__position_cb
position.update()
object_height = self._registers.by_name(
"{}.blind_{}.object_height".format(self.key, self.__identifier))
if object_height is not None:
object_height.update_handlers = self.__object_height_cb
object_height.update()
sunspot_limit = self._registers.by_name(
"{}.blind_{}.sunspot_limit".format(self.key, self.__identifier))
if sunspot_limit is not None:
sunspot_limit.update_handlers = self.__sunspot_limit_cb
sunspot_limit.update()
ac_zone_occupied = self._registers.by_name(
"ac.zone_{}_occupied".format(self.__identifier))
if ac_zone_occupied is not None:
ac_zone_occupied.update_handlers = self.__zone_occupation_cb
ac_zone_occupied.update()
def __get_sun_pos(self):
sun_elev_reg = self._registers.by_name("envm.sun.elevation")
if sun_elev_reg is not None:
if not ((sun_elev_reg.data_type == "float") or
(sun_elev_reg.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(
self.__logger, sun_elev_reg)
return
if self.__sun_elev != sun_elev_reg.value:
self.__sun_elev = sun_elev_reg.value
sun_azm_reg = self._registers.by_name("envm.sun.azimuth")
if sun_azm_reg is not None:
if not ((sun_azm_reg.data_type == "float") or
(sun_azm_reg.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(
self.__logger, sun_azm_reg)
return
if self.__sun_azm != sun_azm_reg.value:
self.__sun_azm = sun_azm_reg.value
#endregion
#region Private Methods
def __calc_sun_spot(self):
if (self.__sun_azm > 0) and (self.__sun_elev > 0):
# print(f"Blinds -> Azm: {self.__sun_azm:03.2f}; Elev: {self.__sun_elev:03.2f}")
# Calculate the shadow length.
shadow_l = shadow_length(self.__object_height,
to_rad(self.__sun_elev))
# print(f"Blinds -> Shadow: {shadow_l:03.2f}")
theta = 360 - (self.__sun_azm + 180)
# print(f"Blinds -> Theta: {theta:03.2f}")
# Calculate cartesian
x = shadow_l * math.cos(to_rad(abs(theta)))
y = shadow_l * math.sin(to_rad(abs(theta)))
# print(f"Blinds -> X: {x:03.2f}; Y: {y:03.2f}")
is_cloudy = False
if (x > self.__sun_spot_limit
or y > self.__sun_spot_limit) and not is_cloudy:
# If is not cloudy and the sun spot is too big, just close the blinds.
if not self.__blind_mechanism is None:
self.__blind_mechanism.set_position(0)
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {} {}".format(
self.name, self.__identifier))
self.__sun_spot_update_timer = Timer(2)
self.__init_registers()
if not self.__blind_mechanism is None:
self.__blind_mechanism.set_position(90)
def _update(self):
"""Update the plugin.
"""
# Update occupation flags.
if not self.__zone_occupation:
if not self.__blind_mechanism is None:
# self.__blind_mechanism.set_position(0)
pass
self.__sun_spot_update_timer.update()
if self.__sun_spot_update_timer.expired:
self.__sun_spot_update_timer.clear()
self.__get_sun_pos()
self.__calc_sun_spot()
if not self.__blind_mechanism is None:
self.__blind_mechanism.update()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {} {}".format(
self.name, self.__identifier))
if not self.__blind_mechanism is None:
self.__blind_mechanism.shutdown()
class Monitoring(BasePlugin):
"""Blinds controller device."""
#region Attributes
__logger = None
"""Logger"""
__cw_flowmeter_dev = None
"""Cold water flow meter."""
__cw_leak_test = None
"""Cold water leak test."""
__hw_flowmeter_dev = None
"""Hot water flow meter."""
__hw_leak_test = None
"""Hot water leak test."""
__power_analyser = None
"""Power analyser."""
__evok_setting = None
"""EVOK settings."""
__measurements = []
"""Power analyser measurements.
"""
__demand_timer = None
"""Demand measuring timer.
"""
#endregion
#region Private Methods
def __filter_measurements_by_time(self, measurements, time_sec: int):
# Create filter list.
filtered_measurements = measurements.copy()
filtered_measurements.clear()
# Reset delete flag.
delete_flag = False
# Now!
time_now = time.time()
# Filter all records.
for measurement in measurements:
# Calculate delta time.
delta_t = time_now - measurement["ts"]
# Filter
if delta_t < time_sec:
filtered_measurements.append(measurement)
# Else mark for deletion.
else:
delete_flag = True
# Execute the flag.
if delete_flag:
self.__measurements.clear()
for measurement in filtered_measurements:
self.__measurements.append(measurement)
#endregion
#region Private Methods (Cold Water Flowmeter)
def __cw_flowmeter_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
if register.value != {} and self.__cw_flowmeter_dev is None:
self.__cw_flowmeter_dev = FlowmetersFactory.create(
name="Cold water flowmeter",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__cw_flowmeter_dev is not None:
self.__cw_flowmeter_dev.init()
# 20 seconds is time for leak testing.
self.__cw_leak_test = LeakTest(self.__cw_flowmeter_dev, 20)
self.__cw_leak_test.on_result(self.__cw_leaktest_result)
elif register.value == {} and self.__cw_flowmeter_dev is not None:
self.__cw_flowmeter_dev.shutdown()
del self.__cw_flowmeter_dev
del self.__cw_leak_test
def __cw_leaktest_result(self, leak_liters):
if leak_liters > 0:
self._registers.write("{}.cw.leak".format(self.key), leak_liters)
def __init_cw(self):
cw_flowmeter = self._registers.by_name(
"{}.cw.flowmeter_settings".format(self.key))
if cw_flowmeter is not None:
cw_flowmeter.update_handlers = self.__cw_flowmeter_settings_cb
cw_flowmeter.update()
def __update_cw(self):
fm_state = self._registers.by_name(self.key + ".cw.value")
if self.__cw_flowmeter_dev is not None and\
fm_state is not None:
fm_state.value = self.__cw_flowmeter_dev.get_liters()
# If the zone is empty check for leaks.
is_empty = self._registers.by_name("envm.is_empty")
if self.__cw_flowmeter_dev is not None and\
is_empty is not None and\
is_empty.value:
self.__cw_leak_test.run()
#endregion
#region Private Methods (Hot Water Flowmeter)
def __hw_flowmeter_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
if register.value != {} and self.__hw_flowmeter_dev is None:
self.__hw_flowmeter_dev = FlowmetersFactory.create(
name="Hot water flowmeter",
controller=self._controller,
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__hw_flowmeter_dev is not None:
self.__hw_flowmeter_dev.init()
# 20 seconds is time for leak testing.
self.__hw_leak_test = LeakTest(self.__hw_flowmeter_dev, 20)
self.__hw_leak_test.on_result(self.__hw_leaktest_result)
elif register.value == {} and self.__hw_flowmeter_dev is not None:
self.__hw_flowmeter_dev.shutdown()
del self.__hw_flowmeter_dev
del self.__hw_leak_test
def __hw_leaktest_result(self, leak_liters):
if leak_liters > 0:
self._registers.write("{}.hw.leak".format(self.key), leak_liters)
def __init_hw(self):
hw_flowmeter = self._registers.by_name(
"{}.hw.flowmeter_settings".format(self.key))
if hw_flowmeter is not None:
hw_flowmeter.update_handlers = self.__hw_flowmeter_settings_cb
hw_flowmeter.update()
def __update_hw(self):
fm_state = self._registers.by_name("{}.hw.value".foamrat(self.key))
if self.__hw_flowmeter_dev is not None and\
fm_state is not None:
fm_state.value = self.__hw_flowmeter_dev.get_liters()
# If the zone is empty check for leaks.
is_empty = self._registers.by_name("envm.is_empty")
if self.__hw_flowmeter_dev is not None and\
is_empty is not None and\
is_empty.value:
self.__hw_leak_test.run()
#endregion
#region Private Methods (Power Analyser)
def __read_all_parameters(self):
black_list = [
"GetRelays",
"GetDigitalInputs",
"GetAnalogOutputs",
"GetAnalogInputs",
"SetRelays",
"SetAnalogOutputs",
]
for parameter in self.__power_analyser.parameters:
name = parameter.parameter_name
if name in black_list:
continue
value = self.__read_local_parameter(name)
print("{}: {}".format(name, value))
def __read_local_parameter(self, name):
value = 0.0
request = self.__power_analyser.generate_request(name)
if request is not None:
response = self._controller.execute_mb_request(
request, self.__power_analyser.uart)
if not response.isError():
registers = {}
for index in range(request.address,
request.address + request.count):
registers[index] = response.registers[index -
request.address]
value = self.__power_analyser.get_parameter_value(
name, registers)
return value
def __read_unipi_mb_master(self):
# Get structure data.
registers_ids = self.__power_analyser.get_registers_ids()
# Get values by the structure.
registers_values = self._controller.read_mb_registers(\
self.__uart, \
self.__dev_id, \
registers_ids, \
RegisterType.ReadInputRegisters)
# Convert values to human readable.
parameters_values = self.__power_analyser.get_parameters_values(
registers_values)
# Format the floating points.
for parameter_value in parameters_values:
try:
parameters_values[parameter_value] = \
float("{:06.3f}".format(float(parameters_values[parameter_value])))
except ValueError:
parameters_values[parameter_value] = float(
"{:06.3f}".format(000.0))
return parameters_values
def __pa_enabled_cb(self, register):
if not register.data_type == "json":
return
if register.value != {} and self.__power_analyser is None:
self.__power_analyser = PowerAnalyserFactory.create(
controller=self._controller,
name="Zone Power analyser",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self._controller.vendor == "UniPi":
# Load EVOK settings.
if os.name == "posix":
self.__evok_setting = EvokSettings("/etc/evok.conf")
if os.name == "nt":
self.__evok_setting = EvokSettings("evok.conf")
# Save settings to the EVOK software.
if not self.__evok_setting.device_exists("EXTENTION_1"):
# Vendor
# vendor = register.value['vendor']
# Model
model = register.value['model']
# UART
uart = register.value['model']
# Unit
unit = register.value['options']['unit']
# Add extention 1.
extention_1 = {
"global_id": unit,
"device_name": model,
"modbus_uart_port": "/dev/extcomm/0/0",
"allow_register_access": True,
"address": uart,
"scan_frequency": 10,
"scan_enabled": True,
"baud_rate": 9600,
"parity": "N",
"stop_bits": 1
}
# Add the configuration.
self.__evok_setting.add_named_device(
extention_1, "EXTENTION_1")
self.__evok_setting.save()
self.__logger.debug("Enable the Power Analyser.")
# Restart the service.
if os.name == "posix":
EvokSettings.restart()
self.__logger.debug("Restart the EVOK service.")
elif register.value == {} and self.__power_analyser is not None:
self.__power_analyser = None
if self._controller.vendor == "UniPi":
if self.__evok_setting.device_exists("EXTENTION_1"):
# Remove the settings.
self.__evok_setting.remove_device("EXTENTION_1")
self.__evok_setting.save()
self.__logger.debug("Disable the Power Analyser.")
# Restart the service.
if os.name == "posix":
EvokSettings.restart()
self.__logger.debug("Restart the EVOK service.")
def __pa_demand_time_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
if register.value < 0.0:
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__demand_timer is not None:
self.__demand_timer.expiration_time = register.value
def __init_pa(self):
pa_enabled = self._registers.by_name(self.key + ".pa.settings")
if pa_enabled is not None:
pa_enabled.update_handlers = self.__pa_enabled_cb
pa_enabled.update()
demand_time = self._registers.by_name(self.key + ".pa.demand_time")
if demand_time is not None:
demand_time.update_handlers = self.__pa_demand_time_cb
demand_time.update()
def __update_pa(self):
if self.__power_analyser is None:
return
# self.__read_all_parameters()
measurement = {
"ImportActiveEnergy": 0.0,
"ExportActiveEnergy": 0.0,
"ImportReactiveEnergy": 0.0,
"ExportReactiveEnergy": 0.0,
"Phase1Current": 0.0,
"Phase2Current": 0.0,
"Phase3Current": 0.0,
"ts": 0,
}
if self.__power_analyser.model == "SDM120":
if self._controller.vendor == "UniPi":
values = self.__read_unipi_mb_master()
measurement["ImportActiveEnergy"] = values[
"ImportActiveEnergy"]
measurement["ExportActiveEnergy"] = values[
"ExportActiveEnergy"]
measurement["ImportReactiveEnergy"] = values[
"ImportReactiveEnergy"]
measurement["ExportReactiveEnergy"] = values[
"ExportReactiveEnergy"]
measurement["Phase1Current"] = values["Current"]
else:
measurement[
"ImportActiveEnergy"] = self.__read_local_parameter(
"ImportActiveEnergy")
measurement[
"ExportActiveEnergy"] = self.__read_local_parameter(
"ExportActiveEnergy")
measurement[
"ImportReactiveEnergy"] = self.__read_local_parameter(
"ImportReactiveEnergy")
measurement[
"ExportReactiveEnergy"] = self.__read_local_parameter(
"ExportReactiveEnergy")
measurement["Phase1Current"] = self.__read_local_parameter(
"Current")
elif self.__power_analyser.model == "SDM630":
if self._controller.vendor == "UniPi":
values = self.__read_unipi_mb_master()
measurement["ImportActiveEnergy"] = values["TotalImportkWh"]
measurement["ExportActiveEnergy"] = values["TotalExportkWh"]
measurement["ImportReactiveEnergy"] = values[
"TotalImportkVArh"]
measurement["ExportReactiveEnergy"] = values[
"TotalExportkVArh"]
measurement["Phase1Current"] = values["Phase1Current"]
measurement["Phase2Current"] = values["Phase2Current"]
measurement["Phase3Current"] = values["Phase3Current"]
else:
measurement[
"ImportActiveEnergy"] = self.__read_local_parameter(
"TotalImportkWh")
measurement[
"ExportActiveEnergy"] = self.__read_local_parameter(
"TotalExportkWh")
measurement[
"ImportReactiveEnergy"] = self.__read_local_parameter(
"TotalImportkVArh")
measurement[
"ExportReactiveEnergy"] = self.__read_local_parameter(
"TotalExportkVArh")
measurement["Phase1Current"] = self.__read_local_parameter(
"Phase1Current")
measurement["Phase2Current"] = self.__read_local_parameter(
"Phase2Current")
measurement["Phase3Current"] = self.__read_local_parameter(
"Phase3Current")
else:
self.__logger.error("Unknown power analyser")
# Set the time of the measurement.
measurement["ts"] = time.time()
# Add measurement to the tail.
self.__measurements.append(measurement)
# This magical number represents seconds for 24 hours.
self.__filter_measurements_by_time(self.__measurements, 86400)
# Update parameters in the registers.
self._registers.write("{}.pa.measurements".format(self.key),
json.dumps(self.__measurements))
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__demand_timer = Timer(3600)
# Init cold water flow meter.
self.__init_cw()
# Init hot water flow meter.
self.__init_hw()
# Init power analyser.
self.__init_pa()
def _update(self):
"""Update the plugin.
"""
# Update cold water flow meter.
self.__update_cw()
# Update hot water flow meter.
self.__update_hw()
# Check is it time to measure.
self.__demand_timer.update()
if self.__demand_timer.expired:
# Clear the timer.
self.__demand_timer.clear()
# Update power analyser.
self.__update_pa()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
class Zone():
"""Main zone class"""
#region Attributes
__logger = None
"""Logger"""
__app_settings = None
"""Application settings."""
__controller = None
"""Neuron controller."""
__erp = None
"""Communication with the ERP."""
__registers = None
"""Registers"""
__plugin_manager = None
"""Plugin manager."""
__update_rate = 0.5
"""Controlling update rate in seconds."""
__update_timer = None
"""Update timer."""
__erp_service_update_rate = 5
"""ERP service update rate in seconds."""
__erp_service_update_timer = None
"""ERP update timer."""
__erp_state_machine = None
"""Zone state."""
__stop_flag = False
"""Time to Stop flag."""
__busy_flag = False
"""Busy flag."""
__performance_profiler = PerformanceProfiler()
"""Performance profiler."""
__performance_profiler_timer = None
"""Performance profiler timer."""
# (Request to stop the queue from MG @ 15.01.2021)
# __registers_snapshot = None
# """Registers snapshot."""
#endregion
#region Private Methods (Registers Interface)
def __target_version_cb(self, register: Register):
current_version = None
target_version = None
target_version_reg = register
# Check data type of the current version.
if not target_version_reg.data_type == "json":
GlobalErrorHandler.log_bad_register_data_type(self.__logger, target_version_reg)
return
# Get target version value.
if target_version_reg.value is not None:
target_version = target_version_reg.value
# Check the target version value.
if target_version == None:
GlobalErrorHandler.log_bad_register_value(self.__logger, target_version)
return
# Get current version register.
current_version_reg = self.__registers.by_name("sys.software.current_version")
# Check data type.
if not ((current_version_reg.data_type == "json")):
GlobalErrorHandler.log_bad_register_data_type(self.__logger, current_version_reg)
return
if current_version_reg is not None:
current_version = current_version_reg.value
# Check the current version value.
if current_version == None:
GlobalErrorHandler.log_bad_register_value(self.__logger, current_version)
return
# Update the software.
software_update(current_version_reg.value, target_version_reg.value)
# Save the current version.
self.__app_settings.current_version = target_version_reg.value
self.__app_settings.save()
def __init_registers(self):
"""Setup registers source.
"""
registers_file = ""
# Current file path. & Go to file.
cwf = os.path.dirname(os.path.abspath(__file__))
registers_file = os.path.join(cwf, "..", "registers.csv")
# Load depending of file format.
if registers_file.endswith('json'):
self.__registers = Registers.from_json(registers_file)
elif registers_file.endswith('csv'):
self.__registers = Registers.from_csv(registers_file)
else:
sys.exit(0)
target_version = self.__registers.by_name("sys.software.current_version")
if target_version is not None:
target_version.value = self.__app_settings.current_version
target_version = self.__registers.by_name("sys.software.target_version")
if target_version is not None:
target_version.update_handlers = self.__target_version_cb
# TODO: Will we ask for update on every start?
#endregion
#region Private Methods (PLC)
def __evok_cb(self, device):
"""EVOK callback service handler.
Args:
device (JSON): GPIOs that was changed.
"""
# Target inputs, by registers names.
names = ["ac.door_closed_1.input", "ac.door_closed_2.input",\
"ac.pir_1.input", "ac.pir_2.input",\
"ac.window_closed_1.input", "ac.window_closed_2.input",\
"monitoring.cw.input", "monitoring.hw.input", "sys.at.input"]
inputs = self.__registers.by_names(names)
gpio = self.__controller.device_to_uniname(device)
for input_reg in inputs:
if input_reg is not None:
if input_reg.value == gpio:
# If register exists, apply value.
required_name = input_reg.name.replace("input", "state")
if self.__registers is not None:
self.__registers.write(required_name, device["value"])
def __init_controller(self):
"""Initialize the controller.
"""
# Create PLC.
self.__controller = ControllerFactory.create(self.__app_settings.controller)
if self.__controller is None:
raise ValueError("Controller is not created.")
# Print out the vendor and model of the controller.
self.__logger.info(self.__controller)
if self.__controller.vendor == "unipi":
self.__controller.set_webhook(self.__evok_cb)
self.__controller.start_web_service()
# Create entrance
if os.name == "posix":
# Load settings
evok_settings = EvokSettings("/etc/evok.conf")
# Modifie
evok_settings.webhook_address = "http://127.0.0.1:8889/api/v1/evok/webhooks ; Put your server endpoint address here (e.g. http://123.123.123.123:/wh )"
evok_settings.webhook_enabled = True
evok_settings.webhook_device_mask = ["input", "wd"]
evok_settings.webhook_complex_events = True
# Save
evok_settings.save()
# Restart the service to accept the settings.
EvokSettings.restart()
#endregion
#region Private Methods (ERP)
def __on_erp_state_change_cb(self, machine):
"""React on ERP state changes.
Args:
machine (StateMachine): State machine state.
"""
self.__logger.info("ERP state: {}".format(machine.get_state()))
def __erp_set_registers(self, data):
"""ERP set registers values.
Args:
data (dict): Registers names and values.
"""
# (Request to have WEB API for work with registers. MG @ 15.01.2021)
result = {}
registers = {}
if data is not None:
registers = data["registers"]
for register_name in registers:
register = self.__registers.by_name(register_name)
if registers is not None:
# Apply the changes.
register.value = registers[register_name]
# In th response add what is going on.
result[register.name] = register.value
return result
def __erp_get_registers(self, data):
"""ERP get registers values.
Args:
registers (dict): Names of registers.
Returns:
dict: Dictionary of registers values and their names.
"""
# (Request to have WEB API for work with registers. MG @ 15.01.2021)
result = {}
registers = {}
if data is not None:
registers = data["registers"]
for register_name in registers:
register = self.__registers.by_name(register_name)
if register is not None:
result[register.name] = register.value
return result
def __init_erp(self):
"""Setup the ERP.
"""
# Take ERP info from settings.
erp_host = self.__app_settings.get_erp_service["host"]
erp_timeout = self.__app_settings.get_erp_service["timeout"]
# Create ERP.
self.__erp = bgERP(host=erp_host, timeout=erp_timeout)
# Set callbacks.
self.__erp.set_registers_cb(
get_cb=self.__erp_get_registers,
set_cb=self.__erp_set_registers)
# Set the ERP update timer.
self.__erp_service_update_timer = Timer(self.__erp_service_update_rate)
# Set zone state machine.
self.__erp_state_machine = StateMachine()
self.__erp_state_machine.on_change(self.__on_erp_state_change_cb)
self.__erp_state_machine.set_state(ERPState.NONE)
def __erp_login(self):
"""Login to bgERP.
"""
login_state = self.__erp.login(
serial_number=self.__controller.serial_number,
model=self.__controller.model,
version=self.__controller.version,
config_time=self.__app_settings.get_erp_service["config_time"],
bgerp_id=self.__app_settings.get_erp_service["erp_id"])
if login_state:
# Rewrite the ERP service ID.
if self.__app_settings.get_erp_service["erp_id"] != self.__erp.erp_id:
self.__app_settings.get_erp_service["erp_id"] = self.__erp.erp_id
self.__app_settings.save()
self.__erp_state_machine.set_state(ERPState.Update)
else:
self.__erp_state_machine.set_state(ERPState.Login)
def __erp_update(self):
"""Sync registers.
"""
# Update periodically bgERP.
self.__erp_service_update_timer.update()
if self.__erp_service_update_timer.expired:
self.__erp_service_update_timer.clear()
ztm_regs = self.__registers.by_scope(Scope.Device)
ztm_regs = ztm_regs.new_then(60)
ztm_regs_dict = ztm_regs.to_dict()
update_state = self.__erp.sync(ztm_regs_dict)
if update_state is not None: # is not None
if self.__registers is not None:
self.__registers.update(update_state)
# Clear the last atendies. (Eml6287)
self.__registers.write("ac.last_update_attendees", str([]))
# (Eml6287)
# (Request to stop the queue from MG @ 15.01.2021)
# not_send_len = self.__registers_snapshot.qsize()
# if not_send_len > 0:
# Get from the queue.
# snapshot = self.__registers_snapshot.get()
# Send the firs from the queue.
# self.__erp.sync(snapshot)
else:
GlobalErrorHandler.log_no_connection_erp(self.__logger)
self.__erp_state_machine.set_state(ERPState.Login)
# # (Request to stop the queue from MG @ 15.01.2021)
# # Create absolute copy of the object.
# reg_copy = self.__registers.by_scope(Scope.Device).to_dict().copy()
# # Put the copy to the queue.
# self.__registers_snapshot.put(reg_copy)
def __update_erp(self):
"""Update ERP.
"""
if self.__erp_state_machine.is_state(ERPState.Login):
# Login room.
self.__erp_login()
elif self.__erp_state_machine.is_state(ERPState.Update):
# Run the process of the room.
self.__erp_update()
elif self.__erp_state_machine.is_state(ERPState.NONE):
self.__erp_state_machine.set_state(ERPState.Login)
#endregion
#region Private Methods (Runtime)
def __init_runtime(self):
# Update timer.
self.__update_timer = Timer(self.__update_rate)
# Update with offset based on the serial number of the device.
time_offset = 0
if self.__controller.serial_number is not None and self.__controller.serial_number.isdigit():
time_offset = int(self.__controller.serial_number)
# Preset the time.
self.__update_timer.expiration_time += (time_offset / 1000)
#endregion
#region Private Methods (Performance Profiler)
def __init_performance_profiler(self):
"""Set the performance profiler.
"""
self.__performance_profiler.enable_mem_profile = True
self.__performance_profiler.enable_time_profile = True
self.__performance_profiler.on_time_change(self.__on_time_change)
self.__performance_profiler.on_memory_change(self.__on_memory_change)
# Setup the performance profiler timer. (60) 10 is for tests.
self.__performance_profiler_timer = Timer(10)
def __on_time_change(self, passed_time):
"""On consumed time change.
Args:
passed_time (int): Consumed runtime.
"""
if self.__registers is not None:
self.__registers.write("sys.time.usage", float("{:10.3f}".format(passed_time)))
def __on_memory_change(self, current, peak):
"""On RAM memory change.
Args:
current (int): Current RAM.
peak (int): Peak RAM.
"""
if self.__registers is not None:
self.__registers.write("sys.ram.current", float("{:10.4f}".format(current)))
self.__registers.write("sys.ram.peak", float("{:10.4f}".format(peak)))
# print(f"Current memory usage is {current / 10**3}kB; Peak was {peak / 10**3}kB")
@__performance_profiler.profile
def __update(self):
"""Update the zone.
"""
# Create log if if it does not.
crate_log_file()
# Update the neuron.
state = self.__controller.update()
if not state:
self.__logger.error("PLC service should be restarted.")
GlobalErrorHandler.log_no_connection_plc(self.__logger)
return
# Give plugins runtime.
self.__plugin_manager.update()
self.__update_erp()
#endregion
#region Public Methods
def init(self):
"""Initialize the process.
"""
try:
# Application settings.
self.__app_settings = ApplicationSettings.get_instance()
# Create logger.
self.__logger = get_logger(__name__)
# Create registers.
self.__init_registers()
# Create PLC.
self.__init_controller()
# Create the plugin manager.
self.__plugin_manager = PluginsManager(self.__registers, self.__controller)
# Setup the ERP.
self.__init_erp()
# Initialize the performance profiler.
self.__init_performance_profiler()
# Initialize the runtime.
self.__init_runtime()
# # (Request to stop the queue from MG @ 15.01.2021)
# self.__registers_snapshot = queue.Queue()
except Exception:
self.__logger.error(traceback.format_exc())
sys.exit(0)
def run(self):
"""Run the zone.
"""
self.__logger.info("Starting up the Zone")
while not self.__stop_flag:
# Update process timers.
self.__update_timer.update()
self.__performance_profiler_timer.update()
# If time has come for execution then run it once and clear the timer.
if self.__update_timer.expired:
self.__update_timer.clear()
# If the busy flag is raise pass the update cycle.
if self.__busy_flag:
pass
self.__busy_flag = True
try:
# If the time has come for profiling.
# Enable the flag and tke profile.
if self.__performance_profiler_timer.expired:
self.__performance_profiler_timer.clear()
self.__performance_profiler.enable = True
# Update the application.
self.__update()
# If the performance profile is runing stop it after the cycle.
if self.__performance_profiler.enable:
self.__performance_profiler.enable = False
# Log the exception without to close the application.
except Exception:
self.__logger.error(traceback.format_exc())
self.__busy_flag = False
# Wait until the main teared ends.
while self.__busy_flag == True:
pass
self.__logger.info("Shutting down the Zone")
# Shutdown the plugins.
self.__plugin_manager.shutdown()
def shutdown(self):
"""Shutdown the process.
"""
self.__stop_flag = True
class Environment(BasePlugin):
"""Environment control and provisioning."""
#region Attributes
__logger = None
"""Logger"""
__update_timer = None
"""Update timer."""
__sunpos_enabled_value = False
"""Sun position local calculation enabled."""
__location_lat = 0.0
"""Location latitude.
"""
__location_lon = 0.0
"""Location longitude.
"""
__location_elv = 0.0
"""Location elevation.
"""
__time_zone = 0
"""Location time zone.
"""
__temperature = 0
"""Temperature
"""
#endregion
#region Private Methods (Registers)
def __sunpos_enabled_cb(self, register):
"""Sun position calculation enable flag handler.
Args:
register (Register): The register.
"""
# Check data type.
if not register.data_type == "bool":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__sunpos_enabled_value != register.value:
self.__sunpos_enabled_value = register.value
def __location_lat_cb(self, register):
"""Get latitude of the building.
Args:
register (Register): The register.
"""
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__location_lat != register.value:
self.__location_lat = register.value
def __location_lon_cb(self, register):
"""Get longitude of the building.
Args:
register (Register): The register.
"""
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__location_lon != register.value:
self.__location_lon = register.value
def __location_elv_cb(self, register):
"""Get elevation of the building.
Args:
register (Register): The register.
"""
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__location_elv != register.value:
self.__location_elv = register.value
def __time_zone_cb(self, register):
"""Get time zone.
Args:
register (Register): The register.
"""
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__time_zone != register.value:
self.__time_zone = register.value
def __temperature_cb(self, register):
"""Get environment temperature.
Args:
register (Register): The register.
"""
# Check data type.
if not ((register.data_type == "float") or
(register.data_type == "int")):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__temperature != register.value:
self.__temperature = register.value
def __init_registers(self):
# Software sun position enabled.
# sunpos_enabled = self._registers.by_name(self.key + ".sunpos.enabled")
sunpos_enabled = self._registers.by_name("envm.sunpos.enabled")
if sunpos_enabled is not None:
sunpos_enabled.update_handlers = self.__sunpos_enabled_cb
sunpos_enabled.update()
location_lat = self._registers.by_name("envm.building.location.lat")
if location_lat is not None:
location_lat.update_handlers = self.__location_lat_cb
location_lat.update()
location_lon = self._registers.by_name("envm.building.location.lon")
if location_lon is not None:
location_lon.update_handlers = self.__location_lon_cb
location_lon.update()
location_elv = self._registers.by_name("envm.building.location.elv")
if location_elv is not None:
location_elv.update_handlers = self.__location_elv_cb
location_elv.update()
time_zone = self._registers.by_name("envm.building.location.time_zone")
if time_zone is not None:
time_zone.update_handlers = self.__time_zone_cb
time_zone.update()
temperature = self._registers.by_name("envm.temp.actual")
if temperature is not None:
temperature.update_handlers = self.__temperature_cb
temperature.update()
def __set_sunpos(self):
"""Set sun position.
"""
self._registers.write("envm.sun.elevation", self.__elevation)
self._registers.write("envm.sun.azimuth", self.__azimuth)
#endregion
#region Private Methods
def __calculate_position(self):
"""Calculate sun position.
"""
# https://www.suncalc.org/#/43.0781,25.5955,17/2021.05.07/11:09/1/1
# Latitude of the target.
lat = self.__location_lat
# Longitude of the target.
lon = self.__location_lon
# Elevation, in meters.
# It is formed by the sum of altitude in [m] + height of the object (building) in [m]
elv = self.__location_elv
# Temperature, in degrees celsius.
temp = self.__temperature
# Atmospheric pressure, in millibar.
presure = 1013.0
# Difference between earth\'s rotation time (TT) and universal time (UT1).
diff_time = 3600 * self.__time_zone
# Output in radians instead of degrees.
mou = False
# Get sun position.
time_now = datetime.now()
azm, zen, ra, dec, h = sunpos(time_now, lat, lon, elv, temp, presure,
diff_time, mou)
elv_out = 90 - zen - 2
azm_out = azm
# self.__logger.info(f"Azimuth: {azm:.2f}; Elevation: {elv:.2f}")
# print(f"SunPos -> Azm: {azm_out:.2f}; Elev: {elv_out:.2f}")
# Update sun location.
self.__azimuth = azm_out
self.__elevation = elv_out
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(2)
self.__init_registers()
def _update(self):
"""Update the plugin.
"""
self.__update_timer.update()
if self.__update_timer.expired:
self.__update_timer.clear()
if self.__sunpos_enabled_value:
self.__calculate_position()
self.__set_sunpos()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
class MODV1(BaseBlind):
"""Electronic blinds"""
#region Attributes
__input_fb = verbal_const.OFF
"""Input feedback."""
__output_ccw = verbal_const.OFF
"""Output CCW"""
__output_cw = verbal_const.OFF
"""Output CW"""
__deg_per_sec = 0
"""Degreases per sec."""
__feedback_treshold = 0
"""Feedback threshold."""
__blinds_state = None
"""Blinds state."""
__move_timer = None
"""Move timer."""
__current_position = 0
"""Current position of the blinds."""
__new_position = 0
"""New position of the blinds."""
__calibration_state = None
""""Calibration state."""
__feedback_type = FeedbackType.NONE
"""Feedback type."""
__timout_counter = 0
"""Timeout counter."""
__t1 = 0
"""T1 moment of first limit."""
__t2 = 0
"""T2 moment of second limit."""
#endregion
#region constructor / Destructor
def __init__(self, **config):
"""Constructor"""
super().__init__(config)
self._vendor = "POLYGONTeam"
self._model = "Blind"
self.__logger = get_logger(__name__)
self.__blinds_state = StateMachine(BlindsState.Wait)
self.__move_timer = Timer()
self.__calibration_state = StateMachine(CalibrationState.NONE)
options = self._config["options"]
if "output_cw" in options:
self.__output_cw = options["output_cw"]
if "output_ccw" in options:
self.__output_ccw = options["output_ccw"]
if "feedback" in options:
self.__input_fb = options["feedback"]
if "feedback_tresh" in options:
self.__feedback_treshold = options["feedback_tresh"]
if "deg_per_sec" in options:
self.__deg_per_sec = options["deg_per_sec"]
# Set the feedback type.
if self.__input_fb.startswith("AI"):
self.__feedback_type = FeedbackType.Analog
elif self.__input_fb.startswith("DI"):
self.__feedback_type = FeedbackType.Digital
else:
GlobalErrorHandler.log_missing_resource(self.__logger, "{}: feedback not set correct or incomparable. Check feedback settings.".format(self.name))
#endregion
#region Private Methods (PLC I/O)
def __stop(self):
"""Stop the engine."""
if self._controller.is_valid_gpio(self.__output_cw):
self._controller.digital_write(self.__output_cw, 0)
if self._controller.is_valid_gpio(self.__output_ccw):
self._controller.digital_write(self.__output_ccw, 0)
def __turn_cw(self):
"""Turn the motor CW."""
if self._controller.is_valid_gpio(self.__output_cw):
self._controller.digital_write(self.__output_cw, 1)
if self._controller.is_valid_gpio(self.__output_ccw):
self._controller.digital_write(self.__output_ccw, 0)
def __turn_ccw(self):
"""Turn the motor CCW."""
if self._controller.is_valid_gpio(self.__output_cw):
self._controller.digital_write(self.__output_cw, 0)
if self._controller.is_valid_gpio(self.__output_ccw):
self._controller.digital_write(self.__output_ccw, 1)
def __reed_fb(self):
"""Read feedback."""
fb_value = 0
if not self._controller.is_valid_gpio(self.__input_fb):
return fb_value
if self.__feedback_type == FeedbackType.Digital:
fb_value = self._controller.digital_read(self.__input_fb)
if self.__feedback_type == FeedbackType.Analog:
ai = self._controller.analog_read(self.__input_fb)
value = ai["value"]
if value < 0:
value = 0
fb_value = value >= self.__feedback_treshold
# self.__logger.debug(f"Voltage: {value:02.4f}")
return fb_value
#endregion
#regio Private Methods
def __to_time(self, degrees):
return degrees / self.__deg_per_sec
#endregion
#region Public Methods
def init(self):
self.__stop()
def update(self):
if self.__blinds_state.is_state(BlindsState.Prepare):
delta_pos = self.__new_position - self.__current_position
if delta_pos == 0:
self.__stop()
self.__blinds_state.set_state(BlindsState.Wait)
return
time_to_move = self.__to_time(abs(delta_pos))
self.__logger.debug("Time: {}".format(time_to_move))
self.__move_timer.expiration_time = time_to_move
self.__move_timer.update_last_time()
if delta_pos > 0:
self.__turn_cw()
elif delta_pos < 0:
self.__turn_ccw()
self.__blinds_state.set_state(BlindsState.Execute)
elif self.__blinds_state.is_state(BlindsState.Execute):
self.__move_timer.update()
if self.__move_timer.expired:
self.__move_timer.clear()
self.__stop()
self.__current_position = self.__new_position
self.__blinds_state.set_state(BlindsState.Wait)
input_fb = self.__reed_fb()
if input_fb:
self.__stop()
GlobalErrorHandler.log_hardware_limit(self.__logger, "{} has raised end position.".format(self.name))
self.__current_position = self.__new_position
self.__blinds_state.set_state(BlindsState.Wait)
elif self.__blinds_state.is_state(BlindsState.Calibrate):
if self.__calibration_state.is_state(CalibrationState.Stop):
self.__stop()
self.__current_position = 0
self.__new_position = 0
self.__calibration_state.set_state(CalibrationState.TurnCW)
elif self.__calibration_state.is_state(CalibrationState.TurnCW):
self.__turn_cw()
self.__calibration_state.set_state(CalibrationState.WaitCurStabCW)
elif self.__calibration_state.is_state(CalibrationState.WaitCurStabCW):
if self.__timout_counter >= 5:
self.__timout_counter = 0
self.__calibration_state.set_state(CalibrationState.WaitLimitCW)
else:
self.__timout_counter += 1
elif self.__calibration_state.is_state(CalibrationState.WaitLimitCW):
fb_value = self.__reed_fb()
if fb_value:
self.__stop()
self.__t1 = time.time()
self.__calibration_state.set_state(CalibrationState.TurnCCW)
elif self.__calibration_state.is_state(CalibrationState.TurnCCW):
self.__turn_ccw()
self.__calibration_state.set_state(CalibrationState.WaitCurStabCCW)
elif self.__calibration_state.is_state(CalibrationState.WaitCurStabCCW):
if self.__timout_counter >= 5:
self.__timout_counter = 0
self.__calibration_state.set_state(CalibrationState.WaitLimitCCW)
else:
self.__timout_counter += 1
elif self.__calibration_state.is_state(CalibrationState.WaitLimitCCW):
fb_value = self.__reed_fb()
if fb_value:
self.__stop()
self.__t2 = time.time()
time_delta = self.__t2 - self.__t1
time_delta -= 4
self.__deg_per_sec = 180 / time_delta
self.__logger.info("DPS: {}".format(self.__deg_per_sec))
self.__turn_cw()
self.__calibration_state.set_state(CalibrationState.ExitTightness)
elif self.__calibration_state.is_state(CalibrationState.ExitTightness):
if self.__timout_counter >= 12:
self.__timout_counter = 0
self.__stop()
self.__calibration_state.set_state(CalibrationState.WaitCurrentStab)
else:
self.__timout_counter += 1
elif self.__calibration_state.is_state(CalibrationState.WaitCurrentStab):
if self.__timout_counter >= 4:
self.__timout_counter = 0
self.__calibration_state.set_state(CalibrationState.GoTo90)
else:
self.__timout_counter += 1
elif self.__calibration_state.is_state(CalibrationState.GoTo90):
self.__calibration_state.set_state(CalibrationState.NONE)
self.__set_position(90)
return
def shutdown(self):
self.set_position(0)
while not self.__blinds_state.is_state(BlindsState.Wait):
self.update()
pass
def set_position(self, position):
"""Set position of the blinds.
Args:
position (float): Position of the blinds.
"""
if self.__new_position == position:
return
if position > 180:
position = 180
elif position < 0:
position = 0
self.__new_position = position
self.__blinds_state.set_state(BlindsState.Prepare)
class LeakTest:
"""Leak test class."""
#region Attributes
__test_state = None
"""Test state machine."""
__check_timer = None
"""Leak test timer."""
__flowmeter_dev = None
"""Flow meter device."""
__result_cb = None
"""Callback result device."""
__first_measurement = 0
"""First measurement of loop flow meter."""
__second_measurement = 0
"""Second measurement of loop flow meter."""
#endregion
#region Constructor / Destructor
def __init__(self, flowmeter, test_time):
self.__flowmeter_dev = flowmeter
self.__test_state = StateMachine(TestState.TakeFirstMeasurement)
self.__check_timer = Timer(test_time)
def __del__(self):
if self.__check_timer is not None:
del self.__check_timer
if self.__test_state is not None:
del self.__test_state
#endregion
#region Public Methods
def on_result(self, callback):
"""On result registration."""
if callback is None:
return
self.__result_cb = callback
def run(self):
"""Run the test."""
self.__check_timer.update()
if self.__check_timer.expired:
self.__check_timer.clear()
if self.__test_state.is_state(TestState.WaitForLeak):
if self.__test_state.was(TestState.TakeFirstMeasurement):
self.__test_state.set_state(
TestState.TakeSecondMeasurement)
elif self.__test_state.was(TestState.TakeSecondMeasurement):
self.__test_state.set_state(TestState.TakeFirstMeasurement)
elif self.__test_state.is_state(TestState.TakeFirstMeasurement):
self.__first_measurement = self.__flowmeter_dev.get_liters()
self.__test_state.set_state(TestState.WaitForLeak)
elif self.__test_state.is_state(TestState.TakeSecondMeasurement):
self.__second_measurement = self.__flowmeter_dev.get_liters()
self.__test_state.set_state(TestState.WaitForLeak)
leak_liters = abs(self.__second_measurement -
self.__first_measurement)
if self.__result_cb is not None:
self.__result_cb(leak_liters)
def __init__(self):
"""Constructor"""
self.__test_state = StateMachine(TestState.NONE)
self.__check_timer = Timer(0)
self.__registers = Registers.from_csv()
class Alarm(BasePlugin):
"""Blinds controller device."""
#region Attributes
__logger = None
"""Logger"""
__update_timer = None
"""Update timer."""
#endregion
#region Private Methods (Registers Interface)
def __sound_device_settings_cb(self, register: Register):
# TODO: - Call the visual device factory.
# TODO: - Build the visual device interface.
# TODO: - Check is it possible to build.
self.__logger.debug("Init the sound device.")
def __visual_device_settings_cb(self, register: Register):
# TODO: - Call the visual device factory.
# TODO: - Build the visual device interface.
# TODO: - Check is it possible to build.
self.__logger.debug("Init the visual device.")
def __init_registers(self):
visual_device_settings = self._registers.by_name(
"{}.device.visual.settings".format(self.key))
if visual_device_settings is not None:
visual_device_settings.update_handlers = self.__visual_device_settings_cb
visual_device_settings.update()
sound_device_settings = self._registers.by_name(
"{}.device.sound.settings".format(self.key))
if sound_device_settings is not None:
sound_device_settings.update_handlers = self.__sound_device_settings_cb
sound_device_settings.update()
#endregion
#region Private Methods
def __do_job(self):
"""Do the JOB method."""
self.__logger.info("Do some job.")
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
self.__init_registers()
def _update(self):
"""Update the plugin.
"""
# Update the timer.
self.__update_timer.update()
if self.__update_timer.expired:
self.__update_timer.clear()
self.__do_job()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
class ElectricalPerformance:
"""Electrical performance test."""
#region Attributes
__test_state = None
"""Test state machine."""
__check_timer = None
"""Check test timer."""
__result_cb = None
"""Callback result device."""
__target_device = None
"""Target device."""
__registers = None
"""Registers"""
__consumption_1 = 0
__consumption_2 = 0
#endregion
#region Constructor / Destructor
def __init__(self):
"""Constructor"""
self.__test_state = StateMachine(TestState.NONE)
self.__check_timer = Timer(0)
self.__registers = Registers.from_csv()
def __del__(self):
"""Destructor"""
if self.__check_timer is not None:
del self.__check_timer
if self.__test_state is not None:
del self.__test_state
#endregion
#region Private Methods
def __turn_target_off(self):
if isinstance(self.__target_device, F3P146EC072600):
self.__target_device.set_speed(0)
def __turn_target_on(self):
if isinstance(self.__target_device, F3P146EC072600):
self.__target_device.set_speed(10)
def __take_current_consumption(self):
current_power = 0
register = self.__registers.by_name("monitoring.pa.l1")
if register is not None:
register_data = json.loads(register.value)
current_power = register_data["Current"]
return current_power
#endregion
#region Public Methods
def start(self):
"""Start the test."""
self.__test_state.set_state(TestState.Init)
def stop(self):
"""Start the test."""
self.__turn_target_off()
self.__test_state.set_state(TestState.NONE)
def set_test_target(self, target_device):
"""Set test target device."""
if target_device is None:
return
self.__target_device = target_device
if isinstance(self.__target_device, F3P146EC072600):
self.__target_device.max_speed = 10
self.__target_device.min_speed = 0
def on_result(self, callback):
"""On result registration."""
if callback is None:
return
self.__result_cb = callback
def run(self):
"""Run the test."""
if self.__test_state.is_state(TestState.Init):
self.__turn_target_off()
self.__consumption_1 = 0
self.__consumption_2 = 0
self.__test_state.set_state(TestState.TakeFirstConsumption)
elif self.__test_state.is_state(TestState.TakeFirstConsumption):
self.__consumption_1 = self.__take_current_consumption()
self.__test_state.set_state(TestState.TurnTargetOn)
elif self.__test_state.is_state(TestState.TurnTargetOn):
self.__turn_target_on()
self.__check_timer.expiration_time = 10
self.__check_timer.update_last_time()
self.__test_state.set_state(TestState.Wait)
elif self.__test_state.is_state(TestState.Wait):
self.__check_timer.update()
if self.__check_timer.expired:
self.__check_timer.clear()
self.__test_state.set_state(TestState.TakeSecondConsumption)
elif self.__test_state.is_state(TestState.TakeSecondConsumption):
self.__consumption_1 = self.__take_current_consumption()
self.__test_state.set_state(TestState.TurnTargetOff)
elif self.__test_state.is_state(TestState.TurnTargetOff):
self.__turn_target_off()
self.__test_state.set_state(TestState.ReturnResults)
elif self.__test_state.is_state(TestState.ReturnResults):
consuption_w = self.__consumption_2 - self.__consumption_1
if self.__result_cb is not None:
self.__result_cb(consuption_w)
self.__test_state.set_state(TestState.NONE)
class FLX05F(BaseValve):
"""Hydro Valve. Model: FLX-05F"""
#region Attributes
__logger = None
"""Logger
"""
__move_timer = None
"""Move timer.
"""
__calibration_state = None
"""Calibration state machine.
"""
__output_cw = verbal_const.OFF
"""Valve output CW GPIO.
"""
__output_ccw = verbal_const.OFF
"""Valve output CCW GPIO.
"""
__limit_cw = verbal_const.OFF
"""Limit switch for CW direction.
"""
__limit_ccw = verbal_const.OFF
"""Limit switch for CCW direction.
"""
__t0 = 0
"""T0 moment.
"""
__t1 = 0
"""T1 moment.
"""
__dt = 0
"""Delta time consumed for one full open and close cycle.
"""
__limit_timer = None
"""Limit timer.
"""
__close_on_shutdown = True
"""Close on shutdown flag.
"""
#endregion
#region Constructor / Destructor
def __init__(self, **config):
"""Constructor
"""
super().__init__(config)
self._vendor = "Flowx"
self._model = "FLX-05F"
# Create logger.
self.__logger = get_logger(__name__)
self.__move_timer = Timer()
# 13 seconds absolute time to react the valve.
# Number is measured by emperic way.
self.__limit_timer = Timer(13)
self.__calibration_state = StateMachine(CalibrationState.NONE)
if "output_cw" in config:
self.__output_cw = config["output_cw"]
if "output_ccw" in config:
self.__output_ccw = config["output_ccw"]
if "limit_cw" in config:
self.__limit_cw = config["limit_cw"]
if "limit_ccw" in config:
self.__limit_ccw = config["limit_ccw"]
if "close_on_shutdown" in config:
self.__close_on_shutdown = config["close_on_shutdown"]
def __del__(self):
"""Destructor
"""
super().__del__()
if self.__logger is not None:
del self.__logger
#endregion
#region Properties
@property
def is_calibrating(self):
"""Return is it in calibration state.
Returns:
bool: True if calibrating, else false.
"""
return self._state.is_state(ValveState.Calibrate)
#endregion
#region Private Methods
def __to_time(self, position):
"""Convert position in to time.
Args:
position (float): Position in %.
Returns:
float: Time in seconds.
"""
return position * (self.__dt / 100.0)
#endregion
#region Private Messatages (PLC I/O)
def __stop(self):
"""Stop the valve motor.
"""
if self._controller.is_valid_gpio(self.__output_cw):
self._controller.digital_write(self.__output_cw, 0)
if self._controller.is_valid_gpio(self.__output_ccw):
self._controller.digital_write(self.__output_ccw, 0)
def __close_valve(self):
"""Turn to CW direction.
"""
if self._controller.is_valid_gpio(self.__output_cw):
self._controller.digital_write(self.__output_cw, 1)
def __open_valve(self):
"""Turn to CCW direction.
"""
if self._controller.is_valid_gpio(self.__output_ccw):
self._controller.digital_write(self.__output_ccw, 1)
def __get_open_limit(self):
state = False
if self._controller.is_valid_gpio(self.__limit_ccw):
state = self._controller.digital_read(self.__limit_ccw)
else:
state = True
return state
def __get_close_limit(self):
state = False
if self._controller.is_valid_gpio(self.__limit_cw):
state = self._controller.digital_read(self.__limit_cw)
else:
state = True
return state
#endregion
#region Public Methods
def init(self):
"""Initialize the device.
"""
self.target_position = 0
while self.current_position != self.target_position:
self.update()
self.__logger.debug("Starting up the: {}".format(self.name))
def shutdown(self):
"""Shutdown the valve.
"""
if self.__close_on_shutdown:
self.__close_valve()
while self.__get_close_limit() == False:
self.update()
self.__stop()
self.__logger.debug("Shutdown the: {}".format(self.name))
def update(self):
"""Update the valve state.
"""
if self._state.is_state(ValveState.Prepare):
delta_pos = self.target_position - self.current_position
if delta_pos == 0:
self.__stop()
self._state.set_state(ValveState.Wait)
return
time_to_move = self.__to_time(abs(delta_pos))
self.__logger.debug("Time: {}".format(time_to_move))
self.__move_timer.expiration_time = time_to_move
self.__move_timer.update_last_time()
if delta_pos > 0:
self.__open_valve()
elif delta_pos < 0:
self.__close_valve()
self._state.set_state(ValveState.Execute)
elif self._state.is_state(ValveState.Execute):
self.__move_timer.update()
if self.__move_timer.expired:
self.__move_timer.clear()
self.__stop()
self._current_position = self.target_position
self._state.set_state(ValveState.Wait)
cw_limit_state = False # self.__get_close_limit()
ccw_limit_state = False # self.__get_open_limit()
if cw_limit_state or ccw_limit_state:
self.__stop()
GlobalErrorHandler.log_hardware_limit(
self.__logger,
"{} has raised end position.".format(self.name))
self._current_position = self.target_position
self._state.set_state(ValveState.Wait)
elif self._state.is_state(ValveState.Calibrate):
# Wait to start.
if self.__calibration_state.is_state(CalibrationState.NONE):
self.__calibration_state.set_state(CalibrationState.OpenValve)
self.__stop()
# Open the valve.
if self.__calibration_state.is_state(CalibrationState.OpenValve):
self.__stop()
self.__open_valve()
self.__calibration_state.set_state(CalibrationState.EnsureOpen)
self.__limit_timer.update_last_time()
# Wait until it si open at 100%.
if self.__calibration_state.is_state(CalibrationState.EnsureOpen):
# Get CCW limit switch state.
ccw_limit_state = self.__get_open_limit()
if ccw_limit_state:
self.__t0 = time.time()
self.__calibration_state.set_state(
CalibrationState.CloseValve)
# Prevent with timer,
# if the valve is not reacting properly.
self.__limit_timer.update()
if self.__limit_timer.expired:
self.__limit_timer.clear()
self.__calibration_state.set_state(CalibrationState.Error)
# Close the valve.
if self.__calibration_state.is_state(CalibrationState.CloseValve):
self.__stop()
self.__close_valve()
self.__calibration_state.set_state(
CalibrationState.EnsureClose)
self.__limit_timer.update_last_time()
# Wait until it si open at 100%.
if self.__calibration_state.is_state(CalibrationState.EnsureClose):
# Get CW limit switch state.
cw_limit_state = self.__get_close_limit()
if cw_limit_state:
self.__t1 = time.time()
self.__calibration_state.set_state(
CalibrationState.YouDoTheMath)
# Prevent with timer,
# if the valve is not reacting properly.
self.__limit_timer.update()
if self.__limit_timer.expired:
self.__limit_timer.clear()
self.__calibration_state.set_state(CalibrationState.Error)
# Make calculations.
if self.__calibration_state.is_state(
CalibrationState.YouDoTheMath):
self.__stop()
self.__dt = self.__t1 - self.__t0
self._state.set_state(ValveState.Wait)
# Close the valve.
if self.__calibration_state.is_state(CalibrationState.Error):
GlobalErrorHandler.log_hardware_malfunction(
self.__logger,
"The valve {} can not calibrated.".format(self.name))
self._state.set_state(ValveState.Wait)
# - Close the valve.
# - Ensure that the valve is closed 0deg.
# - Record the time in T0.
# - Open the valve.
# - Ensure the the valve is opened 90deg.
# - Record the time in T1.
# - Store (T0 - T1) in dT
# - Use dT and end position contacts to ensure that the valve is closed and opened.
def calibrate(self):
self._state.set_state(ValveState.Calibrate)
def update_sync(self):
"""Update synchronious.
"""
while self.current_position != self.target_position:
self.update()
class Light(BasePlugin):
"""Light controller plugin."""
#region Attributes
__logger = None
"""Logger
"""
__update_timer = None
"""Update timer.
"""
__light_sensor = None
"""Light sensor.
"""
__v1_output = verbal_const.OFF
"""Analog voltage output 1.
"""
__v2_output = verbal_const.OFF
"""Analog voltage output 2.
"""
__target_illumination = 50.0
"""Target illumination. [Lux]
"""
__error_gain = 0.001
"""Gain of the error. This parameter is the smoothness of the curve.
"""
__output_limit = 10000
"""Illumination force limit. [V]
"""
__tmp_output = 0
"""Temporary output. [V]
"""
__output = 0
"""Main output. [V]
"""
#endregion
#region Private Methods (Registers Interface)
def __error_gain_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__error_gain != register.value:
self.__error_gain = register.value
def __sensor_settings_cb(self, register):
# Check data type.
if not register.data_type == "json":
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if register.value != {} and self.__light_sensor is None:
self.__light_sensor = LightSensorFactory.create(
controller=self._controller,
name="Room light sensor.",
vendor=register.value['vendor'],
model=register.value['model'],
options=register.value['options'])
if self.__light_sensor is not None:
self.__light_sensor.init()
elif register.value == {} and self.__light_sensor is not None:
self.__light_sensor.shutdown()
del self.__light_sensor
def __v1_output_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
self.__v1_output = register.value
def __v2_output_cb(self, register):
# Check data type.
if not register.data_type == "str":
GlobalErrorHandler.log_bad_register_data_type(
self.__logger, register)
return
self.__v2_output = register.value
def __target_illum_cb(self, register):
# Check data type.
if not (register.data_type == "float" or register.data_type == "int"):
GlobalErrorHandler.log_bad_register_value(self.__logger, register)
return
if self.__target_illumination != register.value:
self.__target_illumination = register.value
def __init_registers(self):
sensor_enabled = self._registers.by_name(self.key + ".sensor.settings")
if sensor_enabled is not None:
sensor_enabled.update_handlers = self.__sensor_settings_cb
sensor_enabled.update()
v1_output = self._registers.by_name(self.key + ".v1.output")
if v1_output is not None:
v1_output.update_handlers = self.__v1_output_cb
v1_output.update()
v2_output = self._registers.by_name(self.key + ".v2.output")
if v2_output is not None:
v2_output.update_handlers = self.__v2_output_cb
v2_output.update()
error_gain = self._registers.by_name(self.key + ".error_gain")
if error_gain is not None:
error_gain.update_handlers = self.__error_gain_cb
error_gain.update()
target_illum = self._registers.by_name(self.key + ".target_illum")
if target_illum is not None:
target_illum.update_handlers = self.__target_illum_cb
target_illum.update()
def __is_empty(self):
value = False
is_empty = self._registers.by_name("envm.is_empty")
if is_empty is not None:
value = is_empty.value
return value
#endregion
#region Private Methods (Controller Interface)
def __set_voltages(self, voltage_1, voltage_2):
"""Set the voltage outputs.
Parameters
----------
voltage_1 : float
Voltage 1.
voltage_2 : float
Voltage 2.
"""
value_v1 = voltage_1
if value_v1 > 10:
value_v1 = 10
if value_v1 < 0:
value_v1 = 0
value_v2 = voltage_2
if value_v2 > 10:
value_v2 = 10
if value_v2 < 0:
value_v2 = 0
if self._controller.is_valid_gpio(self.__v1_output):
self._controller.analog_write(self.__v1_output, value_v1)
if self._controller.is_valid_gpio(self.__v2_output):
self._controller.analog_write(self.__v2_output, value_v2)
#endregion
#region Private Methods
def __flood_fade(self, setpoint):
"""Flood fade generator.
Args:
setpoint (float): Setpoint for the hardware.
Returns:
list: Output voltages for the two analog outputs.
"""
# Negative limit.
if setpoint < 0:
setpoint = 0
# Positive limit.
if setpoint > 100:
setpoint = 100
voltage_1 = 0
voltage_2 = 0
# The model.
if setpoint <= 50:
voltage_1 = l_scale(setpoint, [0, 50], [0, 100])
voltage_2 = 0
else:
voltage_1 = 100
voltage_2 = l_scale(setpoint, [50, 100], [0, 100])
# Return the voltages.
return (voltage_1, voltage_2)
def __calculate(self):
""" Apply thermal force to the devices. """
current_illumination = 0
target_illumination = 0
delta = 0
error = 0
# If there is no one at the zone, just turn off the lights.
is_empty = self.__is_empty()
# Scale t
target_illumination = l_scale(self.__target_illumination,
[0.0, self.__output_limit], [0.0, 100.0])
# Read sensor.
if self.__light_sensor is not None:
current_illumination = self.__light_sensor.get_value()
current_illumination = l_scale(current_illumination,
[0.0, self.__output_limit],
[0.0, 100.0])
# Limits
lower_limit = 0.0
mid_1 = 20.0
mid_2 = 80.0
upper_limit = 100.0
# Check the limits.
if lower_limit <= target_illumination <= mid_1:
self.__tmp_output = (target_illumination / mid_1) * 20.0
elif mid_1 < target_illumination < mid_2:
# Apply the formula.
first = current_illumination
second = (1 + ((50.0 - target_illumination) / 100.0))
calculated_value = first * second
# Calculate the target error.
error = calculated_value - current_illumination
# Integrate the delta to temporal output.
delta = error * self.__error_gain
self.__tmp_output += delta
elif mid_2 <= target_illumination <= upper_limit:
self.__tmp_output = (target_illumination / upper_limit) * 100.
# Limitate the output by target value.
if self.__tmp_output > abs(self.__output_limit):
self.__tmp_output = self.__output_limit
# Limitate by absolute maximum and minimum.
if self.__tmp_output < 0:
self.__tmp_output = 0
if self.__tmp_output > 100:
self.__tmp_output = 100
# Apply the output if it is different.
self.__output = self.__tmp_output
# Convert to volgate.
to_voltage_scale = 0.1 # Magic number!!!
voltage_1, voltage_2 = self.__flood_fade(self.__output)
out_to_v1 = voltage_1 * to_voltage_scale
out_to_v2 = voltage_2 * to_voltage_scale
# If the zone is empty, turn the lights off.
if is_empty:
pass
# set the voltage.
self.__set_voltages(out_to_v1, out_to_v2)
self.__logger.debug("TRG {:3.3f}\tINP {:3.3f}\tERR: {:3.3f}\tOUT1: {:3.3f}\tOUT2: {:3.3f}"\
.format(target_illumination, current_illumination, delta, out_to_v1, out_to_v2))
#endregion
#region Public Methods
def _init(self):
"""Initialize the plugin.
"""
self.__logger = get_logger(__name__)
self.__logger.info("Starting up the {}".format(self.name))
self.__update_timer = Timer(1)
self.__init_registers()
self.__set_voltages(0, 0)
def _update(self):
"""Update the plugin.
"""
# Update sensor data.
self.__light_sensor.update()
self.__update_timer.update()
if self.__update_timer.expired:
self.__update_timer.clear()
self.__calculate()
def _shutdown(self):
"""Shutting down the plugin.
"""
self.__logger.info("Shutting down the {}".format(self.name))
self.__set_voltages(0, 0)
