def test_sequence_stack(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, FixedLengthSlice)
waveform1 = DC(0.1e-6, 1)
waveform2 = DC(0.1e-6, 2)
waveform3 = DC(0.1e-6, 3)
slice0.add_waveform(mock_awg0, waveform1)
slice0.add_waveform(mock_awg0, waveform2)
slice0.add_waveform(mock_awg0, waveform3)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
expected_waveform, _ = Blank(2.7e-6).concat(waveform1).concat(waveform2) \
.concat(waveform3) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg0.device.raw_waveform)
assert (mock_awg0.device.raw_waveform == expected_waveform).all()
def test_slice_padding_across_multiple_trigger_channels(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice2, FixedLengthSlice)
waveform_awg0 = DC(0.1e-6, 1)
waveform_awg2 = DC(0.1e-6, 1)
waveform_awg4 = DC(0.1e-6, 1)
slice2.add_waveform(mock_awg0, waveform_awg0)
slice2.add_waveform(mock_awg3, waveform_awg2)
slice2.add_waveform(mock_awg6, waveform_awg4)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
awg_0_expected_waveform, _ = Blank(2e-6 + 0.9e-6).concat(waveform_awg0) \
.normalized_sample(mock_awg0.device.sample_rate)
awg_2_expected_waveform, _ = Blank(1e-6 + 0.9e-6).concat(waveform_awg2) \
.normalized_sample(mock_awg3.device.sample_rate)
awg_4_expected_waveform, _ = Blank(0.9e-6).concat(waveform_awg4) \
.normalized_sample(mock_awg6.device.sample_rate)
for exp, awg in [
(awg_0_expected_waveform, mock_awg0.device.raw_waveform),
(awg_2_expected_waveform, mock_awg3.device.raw_waveform),
(awg_4_expected_waveform, mock_awg6.device.raw_waveform)
]:
assert isinstance(exp, np.ndarray)
assert isinstance(awg, np.ndarray)
assert len(exp) == len(awg)
assert (exp == awg).all()
def test_waveform_gate(self):
runtime = init_runtime()
sequence = init_gate_sequence(runtime)
slice0 = FixedSlice("slice_0", 0, 5e-9)
sequence.add_slice(slice0)
waveform0 = DC(5e-9, 2)
waveform1 = Blank(1e-9).concat(DC(3e-9, 1)).concat(Blank(1e-9))
slice0.add_waveform(mock_awg10, waveform0)
slice0.add_waveform(mock_awg10_gate, waveform1)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
expected_waveform, expected_amp = (waveform1 * waveform0) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg10.device.raw_waveform)
assert expected_amp == mock_awg10.device.raw_waveform_amp
assert (mock_awg10.device.raw_waveform == expected_waveform).all()
def test_waveform_too_long_exception(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
waveform_slice0 = DC(3e-6, 2)
slice0.add_waveform(mock_awg3, waveform_slice0)
sequence.setup_trigger()
with pytest.raises(AssertionError):
sequence.setup_channels()
def test_trigger_setup(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
sequence.setup_trigger()
for channel, expected_raise_at, expected_duration in [(0, 0, 2e-6),
(1, 1e-6, 0),
(2, 2e-6, 0)]:
raise_at, duration = mock_dg.device.get_channel_delay(channel)
assert raise_at == expected_raise_at
if expected_duration > 0:
assert duration == expected_duration
def test_procedure_result_retrieve(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, Slice)
cycle = self.MyTestStackCycle(runtime, slice0, mock_awg0,
[(0.1e-6, 1)])
cycle.add_procedure(self.DummyResultProcedure("prefix_"))
res = cycle.run()
assert res["prefix_res1"] == 3333
assert res["prefix_res2"] == 4444
def test_sub_slice_overleaf(self):
runtime = init_runtime()
sequence = init_nake_sequence(runtime)
slice0 = FixedSlice("slice_0", 0, 20e-9)
sequence.add_slice(slice0)
sub_slice0 = FlexSlice("sub_slice0")
sub_slice1 = FlexSlice("sub_slice1")
sub_slice2 = FlexSlice("sub_slice2")
slice0.add_sub_slice(sub_slice0)
slice0.add_sub_slice(sub_slice1)
slice0.add_sub_slice(sub_slice2)
waveform0 = DC(5e-9, 1)
waveform1 = DC(5e-9, 2)
waveform2 = DC(10e-9, 3)
sub_slice0.add_waveform(mock_awg0, waveform0)
sub_slice1.add_waveform(mock_awg1, waveform1)
sub_slice2.add_waveform(mock_awg2, waveform2)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
print(slice0.processed_waveforms[mock_awg0])
print(slice0.processed_waveforms[mock_awg1])
print(slice0.processed_waveforms[mock_awg2])
print(sequence.last_compiled_waveforms[mock_awg0])
print(sequence.last_compiled_waveforms[mock_awg1])
print(sequence.last_compiled_waveforms[mock_awg2])
awg_0_expected_waveform, _ = waveform0.concat(Blank(5e-9)).concat(Blank(10e-9))\
.normalized_sample(mock_awg0.device.sample_rate)
awg_1_expected_waveform, _ = Blank(5e-9).concat(waveform1).concat(Blank(10e-9)) \
.normalized_sample(mock_awg1.device.sample_rate)
awg_2_expected_waveform, _ = Blank(5e-9).concat(Blank(5e-9)).concat(waveform2)\
.normalized_sample(mock_awg2.device.sample_rate)
for i, (exp, awg) in enumerate([
(awg_0_expected_waveform, mock_awg0.device.raw_waveform),
(awg_1_expected_waveform, mock_awg1.device.raw_waveform),
(awg_2_expected_waveform, mock_awg2.device.raw_waveform)
]):
print(i)
assert isinstance(exp, np.ndarray)
assert isinstance(awg, np.ndarray)
assert len(exp) == len(awg)
assert (exp == awg).all()
def test_waveform_overlap_exception(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
waveform_slice0 = DC(0.1e-6, 2)
waveform_slice1 = DC(0.1e-6, 3)
slice0.add_waveform(mock_awg0, waveform_slice0)
slice1.add_waveform(mock_awg0, waveform_slice1)
sequence.setup_trigger()
with pytest.raises(AssertionError):
sequence.setup_channels()
def test_procedure_has_update(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, Slice)
cycle = self.MyTestStackCycle(runtime, slice0, mock_awg0,
[(0.1e-6, 1)])
cycle.run()
assert not cycle.procedures[0].has_update
cycle.procedures[0].waveform = DC(0.1e-6, 2)
assert cycle.procedures[0].has_update
def test_sub_slice_waveform_update(self):
runtime = init_runtime()
sequence = init_nake_sequence(runtime)
slice0 = FixedSlice("slice_0", 0, 20e-9)
sequence.add_slice(slice0)
sub_slice0 = FlexSlice("sub_slice0")
sub_slice1 = FlexSlice("sub_slice1")
sub_slice2 = FlexSlice("sub_slice2")
slice0.add_sub_slice(sub_slice0)
slice0.add_sub_slice(sub_slice1)
slice0.add_sub_slice(sub_slice2)
waveform0 = DC(5e-9, 1)
waveform1 = DC(5e-9, 2)
waveform2 = DC(10e-9, 3)
sub_slice0.add_waveform(mock_awg0, waveform0)
sub_slice1.add_waveform(mock_awg1, waveform1)
sub_slice2.add_waveform(mock_awg2, waveform2)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
assert slice0.get_updated_channel() == []
sub_slice0.clear_waveform(mock_awg0)
sub_slice0.add_waveform(mock_awg0, DC(5e-9, 2))
# Slice length unchanged, expect that only awg0 need to be updated
updated = slice0.get_updated_channel()
assert mock_awg0 in updated
assert mock_awg1 not in updated
assert mock_awg2 not in updated
waveform1_ = DC(2e-9, 2)
sub_slice1.add_waveform(mock_awg1, waveform1_)
# Slice length changed, expect that all channels to be updated
updated = slice0.get_updated_channel()
assert mock_awg0 in updated
assert mock_awg1 in updated
assert mock_awg2 in updated
def test_stack_procedures(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, Slice)
cycle = self.MyTestStackCycle(runtime, slice0, mock_awg0,
[(0.1e-6, 1), (0.1e-6, 2), (0.1e-6, 3)])
cycle.run()
expected_waveform, _ = Blank(2.7e-6).concat(DC(0.1e-6, 1)) \
.concat(DC(0.1e-6, 2)).concat(DC(0.1e-6, 3)) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg0.device.raw_waveform)
assert (mock_awg0.device.raw_waveform == expected_waveform).all()
def test_sweep(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, Slice)
cycle = self.MyTestSweepCycle(runtime, slice0, mock_awg0)
cycle.proc.amp = 1
test_experiment = Sweep1DExperiment(runtime, "Test Experiment", cycle)
res = test_experiment.sweep(
scan_param="proc.len",
scan_param_unit="s",
points=np.linspace(0, 1e-6, 3),
result_name="prefix_res1",
result_unit="arb."
)
assert (res['prefix_res1'] == np.array([3333, 3334, 3335])).all()
def test_slice_padding_after(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
assert isinstance(slice0, FixedLengthSlice)
waveform = DC(0.1e-6, 1)
slice0.set_waveform_padding(mock_awg0, PaddingPosition.PADDING_BEHIND)
slice0.add_waveform(mock_awg0, waveform)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
expected_waveform, _ = waveform.concat(Blank(3e-6 - 0.1e-6)) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg0.device.raw_waveform)
assert (mock_awg0.device.raw_waveform == expected_waveform).all()
def test_same_awg_channel_across_slices(self):
runtime = init_runtime()
sequence, slice0, slice1, slice2 = init_fixed_sequence(runtime)
waveform_slice1 = DC(0.1e-6, 2)
waveform_slice2 = DC(0.1e-6, 3)
slice1.add_waveform(mock_awg0, waveform_slice1)
slice2.add_waveform(mock_awg0, waveform_slice2)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
expected_waveform, _ = Blank(1.9e-6).concat(waveform_slice1) \
.concat(Blank(0.9e-6)).concat(waveform_slice2) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg0.device.raw_waveform)
assert (mock_awg0.device.raw_waveform == expected_waveform).all()
def test_sub_slice_single_channel(self):
runtime = init_runtime()
sequence = init_nake_sequence(runtime)
slice0 = FixedSlice("slice_0", 0, 20e-9)
sequence.add_slice(slice0)
sub_slice0 = FlexSlice("sub_slice0")
sub_slice1 = FlexSlice("sub_slice1")
sub_slice2 = FlexSlice("sub_slice2")
slice0.add_sub_slice(sub_slice0)
slice0.add_sub_slice(sub_slice1)
slice0.add_sub_slice(sub_slice2)
waveform0 = DC(5e-9, 1)
waveform1 = DC(5e-9, 2)
waveform2 = DC(10e-9, 3)
sub_slice0.add_waveform(mock_awg0, waveform0)
sub_slice1.add_waveform(mock_awg0, waveform1)
sub_slice2.add_waveform(mock_awg0, waveform2)
sequence.setup_trigger()
sequence.setup_channels()
sequence.run_channels()
expected_waveform, _ = waveform0.concat(waveform1) \
.concat(waveform2) \
.normalized_sample(mock_awg0.device.sample_rate)
assert isinstance(expected_waveform, np.ndarray)
assert isinstance(mock_awg0.device.raw_waveform, np.ndarray)
assert len(expected_waveform) == len(mock_awg0.device.raw_waveform)
assert (mock_awg0.device.raw_waveform == expected_waveform).all()
from unittest.mock import MagicMock, PropertyMock, patch, call
import numpy as np
from thunderq.cycles.native import Cycle
from utils import init_runtime, init_fixed_sequence
runtime = init_runtime()
init_fixed_sequence(runtime)
test_param1 = PropertyMock()
test_param2 = PropertyMock()
test_param3 = PropertyMock()
test_result = np.linspace(0, 99, 100)
def prepare_cycle():
global test_param1, test_param2, test_param3
cycle = MagicMock()
test_param1 = PropertyMock()
test_param2 = PropertyMock()
test_param3 = PropertyMock()
type(cycle).test_param1 = test_param1
type(cycle).test_param2 = test_param2
type(cycle).test_param3 = test_param3
type(cycle).add_procedure = MagicMock()
type(cycle).clear_procedures = MagicMock()
type(cycle).run = MagicMock()
type(cycle).run.side_effect = [{'test_result': v} for v in test_result]
type(cycle).run_sequence = MagicMock()
type(cycle).stop_sequence = MagicMock()
