def rotate(self, deg=90):
"""Rotates the entities selected and
update the selction list
"""
if len(self.__selection_list) == 0:
return
max_ = max(self.__all_selection)
min_ = min(self.__all_selection)
pivot = Point(
min_.x + ((max_.x - min_.x) / 2.),
min_.y + ((max_.y - min_.y) / 2.),
)
new_dict = BaseGrid(int)
new_selection = list()
new_all = list()
for point in self.__selection_list:
new_pos = rotate_point(point, pivot, deg)
new_selection.append(new_pos)
new_dict[new_pos] = ALL_ENTITIES[self._grid[point]].rotate(deg)
self.delete(point)
self.__selection_list = new_selection
self.__all_selection = list()
for point in self.__all_selection:
new_all.append(rotate_point(point, pivot, deg))
self.__all_selection = new_all
for pos, entity in self._grid.viewitems():
if pos not in new_dict:
new_dict[pos] = entity
self._grid.clear()
self._grid.update(new_dict)
self.__update_selection()
def rotated_points(self) -> tuple:
# define the points of the ship's triangle and rotate them by the player's rotation
point_nose = rotate_point(self.x + self.scale, self.y, self.x, self.y, self.rotation)
point_right_fin = rotate_point(self.x - self.scale, self.y - (self.scale * 0.8), self.x, self.y, self.rotation)
point_left_fin = rotate_point(self.x - self.scale, self.y + (self.scale * 0.8), self.x, self.y, self.rotation)
return point_nose, point_right_fin, point_left_fin
def get_corners(centre, width_scale, start_point):
horiz_rot = 2*math.atan(width_scale)
vert_rot = math.pi - horiz_rot
points = np.vstack((start_point, rotate_point(centre, start_point, horiz_rot)))
points = np.vstack((points, rotate_point(centre, points[0, :], horiz_rot+vert_rot)))
points = np.vstack((points, rotate_point(centre, points[0, :], -vert_rot)))
return points
def rotate(self, center, angle):
"""Compute new word's bounding box coordinates after rotation.
"""
#self.bounding_box = [rotate_point(x,center,angle) for x in self.bounding_box]
self.relative_bounding_box = [
rotate_point(x, center, angle) for x in self.relative_bounding_box
]
def motion_update(particles, odom, grid):
""" Particle filter motion update
Arguments:
particles -- input list of particle represents belief p(x_{t-1} | u_{t-1})
before motion update
odom -- odometry to move (dx, dy, dh) in *robot local frame*
grid -- grid world map, which contains the marker information,
see grid.py and CozGrid for definition
Can be used for boundary checking
Returns: the list of particles represents belief \tilde{p}(x_{t} | u_{t})
after motion update
"""
motion_particles = []
dh = odom[2]
for particle in particles:
x_coor, y_coor, h_coor = particle.xyh
dx, dy = utils.rotate_point(odom[0], odom[1], h_coor)
new_noisy_x, new_noisy_y, new_noisy_h = utils.add_odometry_noise(
(x_coor + dx, y_coor + dy, h_coor + dh), setting.ODOM_HEAD_SIGMA,
setting.ODOM_TRANS_SIGMA)
new_noisy_particle = Particle(new_noisy_x, new_noisy_y, new_noisy_h)
motion_particles.append(new_noisy_particle)
# motion_particles = particles
return motion_particles
def plot_position_angle(i, color):
"""
Plots the position angle for source (i) on the sky as a line with a radius proportional
to either the nearest neighbour distance or the major axis of a source.
"""
RA = tdata['RA_2'][i]
DEC = tdata['DEC_2'][i]
position_angle = tdata['final_PA'][i]
NN_dist = tdata['new_NN_distance(arcmin)'][i]
size = 160 # 80 #set fixed X*4 arcsec
# size = tdata['size_thesis'][i]
z_best = tdata['z_best'][i]
radius = size / 3600. # convert arcsec to deg
radius *= 4 # enhance radius by a factor
origin = (RA, DEC) # (coordinates of the source)
up_point = (RA, DEC + radius) # point above the origin (North)
down_point = (RA, DEC - radius) # point below the origin (South)
# rotate the line according to the position angle North through East (counterclockwise)
x_rot_up, y_rot_up = rotate_point(origin, up_point, position_angle)
x_rot_down, y_rot_down = rotate_point(origin, down_point,
position_angle)
x = x_rot_down
y = y_rot_down
dx = x_rot_up - x_rot_down
dy = y_rot_up - y_rot_down
# ax.arrow(x,y,dx,dy)
if color:
# make colorbar with the redshift data
plt.plot((x_rot_down, x_rot_up), (y_rot_down, y_rot_up),
c=color,
linewidth=0.4)
else:
plt.plot((x_rot_down, x_rot_up), (y_rot_down, y_rot_up),
linewidth=0.4,
c='k')
def update(self, game_map: Map, delta_time):
vector = utils.rotate_point(
(0, -config.PROJECTILE_SPEED / config.TILE_SIZE * delta_time),
self.direction)
self.x += vector[0]
self.y += vector[1]
if self.x < -3 or self.y < -3 or self.x > game_map.width + 3 or self.y > game_map.height + 3:
self.exists = False
def __init__(self, speedvector, game):
pg.sprite.Sprite.__init__(self)
# game objects
self.gm = game
self.player = game.p
self.evm = game.evm
self.evm.add_listener(self)
# make vector in opposite direction from player
self.vector = -1 * speedvector
# spritegroups
self.gm.allsprites.add(self)
self.gm.onscreen.add(self)
self.gm.pvedamage.add(self)
self.gm.p.allsprites.add(self)
self.gm.p.brakeshots.add(self)
# get angle to positive x-axis
self.angle_d = self.vector.angle_to(pg.math.Vector2((1, 0)))
self.angle_r = math.radians(self.angle_d)
# load animation
self.animation = ani.Animation("brakeblast.png", 64)
self.image = self.animation.get_frame_no(0).convert_alpha()
# find center for new rect by rotating a pre-defined center
# TODO generalize this magic constant to enable scaling
center_rightx = self.player.rect.centerx + 50
center_righty = self.player.rect.centery
center_right = (center_rightx, center_righty)
newcenter = utils.rotate_point(self.player.rect.center, center_right,
-1 * self.angle_r)
# get rect from image
self.rect = pg.transform.rotate(
self.image, self.angle_d).get_rect(center=newcenter)
print(str(self.vector.length()))
print(self.rect)
# bool to ensure only dealing damage once
self.damage_dealt = False
def translate_points_to_origin(p0, p1):
"""Translate to the origin and rotate the points to have both on the x axis
"""
logg = logging.getLogger(f"c.{__name__}.translate_points_to_origin")
logg.setLevel("INFO")
logg.debug(f"Starting translate_points_to_origin")
# direction from point 0 to 1
dir_01 = degrees(atan2(p1.y - p0.y, p1.x - p0.x))
logg.debug(f"dir_01: {dir_01}")
# rotate the point and translate them in the origin
rot_p0 = SPoint(0, 0, p0.ori_deg - dir_01)
# tranlsate p1 towards origin by p0
tran_p1x = p1.x - p0.x
tran_p1y = p1.y - p0.y
# rotate p1 position by dir_01
rototran_p1 = utils.rotate_point(np.array([tran_p1x, tran_p1y]), dir_01)
rot_p1 = SPoint(rototran_p1[0], rototran_p1[1], p1.ori_deg - dir_01)
logg.debug(f"rot_p0: {rot_p0} rot_p1: {rot_p1}")
return rot_p0, rot_p1, dir_01
def motion_update(particles, odom, grid):
""" Particle filter motion update
Arguments:
particles -- input list of particle represents belief p(x_{t-1} | u_{t-1})
before motion update
odom -- odometry to move (dx, dy, dh) in *robot local frame*
grid -- grid world map, which contains the marker information,
see grid.py and CozGrid for definition
Can be used for boundary checking
Returns: the list of particles represents belief \tilde{p}(x_{t} | u_{t})
after motion update
"""
motion_particles = []
for p in particles:
x, y, h = p.xyh
dx, dy, dh = odom
dx, dy = rotate_point(dx, dy, h)
odom_temp = (x + dx, y + dy, h + dh)
x, y, h = add_odometry_noise(odom_temp, setting.ODOM_HEAD_SIGMA,
setting.ODOM_TRANS_SIGMA)
motion_particles.append(Particle(x, y, h))
return motion_particles
def rototranslate_points(x_sample, y_segment, offset_angle, offset_x, offset_y):
"""Rototranslate the points [x_sample, y_segment]
Apply first the rotation by offset_angle, then the translation by
(offset_x, offset_y)
"""
logg = logging.getLogger(f"c.{__name__}.rototranslate_points")
logg.setLevel("INFO")
logg.debug(f"Starting rototranslate_points")
# rotate the points back
all_segment = np.array([x_sample, y_segment]).transpose()
# logg.debug(f"all_segment.shape: {all_segment.shape}")
rotated_segment = utils.rotate_point(all_segment, offset_angle)
# logg.debug(f"rotated_segment.shape: {rotated_segment.shape}")
# translate them
tran_segment = rotated_segment + np.array([offset_x, offset_y])
tran_segment = tran_segment.transpose()
# logg.debug(f"tran_segment.shape: {tran_segment.shape}")
rototran_x = tran_segment[0]
rototran_y = tran_segment[1]
return rototran_x, rototran_y
def get_point(self, point: int) -> Tuple[float, float]:
rotated = utils.rotate_point(self._points[point], self.angle)
return rotated[0] + self.x, rotated[1] + self.y
def find_orientationMG(i,
fitsim,
ra,
dec,
Maj,
Min,
s=(3 / 60.),
plot=False,
head=None,
hdulist=None):
'''
Finds the orientation of multiple gaussian single sources
To run this function for all sources, use setup_find_orientation_multiple_gaussians() instead.
A big part of this function is a re-run of the postage function,
since we need to make a new postage basically, but this time as an array.
Arguments:
i -- The new_Index of the source
fitsim -- Postage created earlier (if exists)
ra, dec -- Ra and dec of the source
Maj -- Major axis of the source
s -- Width of the image, default 3 arcmin, because it has to be a tiny bit
lower than the postage created earlier (width 4 arcmin) or NaNs will appear in the image
plot -- Whether to plot the results.
head and hdulist -- the header and hdulist if a postage hasn't been created before.
(This is so it doesn't open every time in the loop but is opened before the loop.)
Returns:
i -- new_Index of the source
max_angle -- Angle of the flux line for which flux is maximized.
len(err_orientations) -- Amount of degrees spread in the angle of the flux line
len(indx_extrema[0]) -- Amount of extrema along the line
classification -- 'Large' or 'Small' error, based on cutoff value
lobe_ratio -- The flux ratio between the two brightest lobes
position_angle -- Position angle between the two brightest lobes
error - Array containing difference in [RA,DEC] between the 80% cutoff value and the maximum flux
If plot=True, produces the plots of the best orientation and the Flux vs Orientation as well
'''
wcs = pw.WCS(hdulist[0].header)
data_array = extr_array(False,
fitsim,
ra,
dec,
s=s,
head=head,
hdulist=hdulist)
# use a radius for the line that is the semimajor axis,
# but with 2 pixels more added to the radius
# to make sure we do capture the whole source
radius = Maj / 60. * 40. #arcsec -- > arcmin --> image units
radius = int(radius) + 2 # is chosen arbitrarily
# in the P173+55 1 arcmin = 40 image units
# this is true for field in FieldNames.
# check if there are no NaNs in the cutout image, if there are then make smaller cutout
if True in (np.isnan(data_array)):
if s < (2 / 60.):
print "No hope left for this source "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
elif s == (2 / 60.):
print "Nan in the cutout image AGAIN ", head['OBJECT'], ' i = ', i
try:
return find_orientationMG(i,
fitsim,
ra,
dec,
Maj,
Min,
s=(Maj * 2. / 60. / 60.),
plot=plot,
head=head,
hdulist=hdulist)
except RuntimeError:
print "No hope left for this source, "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
else:
print "NaN in the cutout image: ", head['OBJECT'], ' i = ', i
try:
return find_orientationMG(i,
fitsim,
ra,
dec,
Maj,
Min,
s=(2 / 60.),
plot=plot,
head=head,
hdulist=hdulist)
except RuntimeError:
print "No hope left for this source, "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
# find the cutoff value, dependent on the distance
cutoff = 2 * np.arctan(Min / Maj) * 180 / np.pi # convert rad to deg
# find the max orientation of the flux along a line and '80% flux error'
(max_angle, err_orientations, min_orientation, max_orientation,
classification, positions) = flux_along_line(data_array, radius, cutoff,
hdulist)
# then find the amount of maxima and the lobe_ratio
position_angle, lobe_ratio, lobe1, lobe2, indx_extrema = find_lobes(
data_array, positions, max_angle, hdulist)
# to make sure the lobes aren't switched
if (min_orientation < 90 and max_orientation > 90):
max_orientation -= 180
elif (min_orientation > 90 and max_orientation < 90):
min_orientation -= 180
original_position_angle = position_angle
try:
lobe1_min, lobe2_min = find_lobes(data_array, positions,
min_orientation, hdulist)[2:4]
error = lobe1 - lobe1_min
except ValueError:
print 'tja1'
try:
lobe1_min, lobe2_min = find_lobes(data_array, positions,
max_orientation, hdulist)[2:4]
error = lobe1 - lobe1_min
except ValueError:
print 'tja2'
xcenter, ycenter = positions['xcenter'], positions['ycenter']
x0, y0 = positions['x0'], positions['y0']
x1, y1 = positions['x1'], positions['y1']
num = 1000
if plot:
# the plot of the rotated source and the flux along the line
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0), max_angle)
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1), max_angle)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
zi = map_coordinates(data_array,
np.vstack((y_rot, x_rot)),
prefilter=True)
fig, axes = plt.subplots(nrows=2, figsize=(12, 12))
axes[0].imshow(data_array, origin='lower')
axes[0].plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'r-', alpha=0.3)
axes[1].plot(zi)
# rotate line on the left side of the center with min angle
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0),
min_orientation)
# rotate line on the right side of the center with min angle
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1),
min_orientation)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
axes[0].plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'b-', alpha=0.3)
# rotate line on the left side of the center with max angle
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0),
max_orientation)
# rotate line on the right side of the center with max angle
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1),
max_orientation)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
axes[0].plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'b-', alpha=0.3)
axes[0].set_xlabel('pixels')
axes[0].set_ylabel('pixels')
axes[1].set_ylabel('Flux (arbitrary units)')
axes[1].set_xlabel('points')
plt.suptitle('Field: ' + head['OBJECT'] + ' | Source ' + str(i) +
'\n extrema: ' + str(indx_extrema) +
'\n lobe ratio: %.3f' % lobe_ratio +
' | Position Angle: %.3f' % position_angle +
' Err orientation: %.1f' % len(err_orientations))
plt.show()
plt.clf()
plt.close()
return i, max_angle, len(err_orientations), len(
indx_extrema[0]), classification, lobe_ratio, position_angle, error
def find_orientationNN(i,
fitsim,
ra,
dec,
nn_ra,
nn_dec,
nn_dist,
maj,
s=(3 / 60.),
plot=False,
head=None,
hdulist=None):
'''
Finds the orientation of NN
To run this function for all sources, use setup_find_orientation_NN() instead.
Arguments:
i -- the new_Index of the source
fitsim -- the postage created earlier
ra, dec -- the ra and dec of the source
maj -- the major axis of the source
s: the width of the image, default 3 arcmin, because it has to be a tiny bit
lower than the postage created earlier (width 4 arcmin) or NaNs will appear in the image
head and hdulist, the header and hdulist if a postage hasn't been created before.
(This is so it doesn't open every time in the loop but is opened before the loop.)
Returns:
i -- new_Index of the source
max_angle -- Angle of the flux line for which flux is maximized.
len(err_orientations) -- Amount of degrees spread in the angle of the flux line
len(indx_extrema[0]) -- Amount of extrema along the line
classification -- 'Large' or 'Small' error, based on cutoff value
lobe_ratio -- The flux ratio between the two brightest lobes
position_angle -- Position angle between the two brightest lobes
error - Array containing difference in [RA,DEC] between the 80% cutoff value and the maximum flux
If plot=True, produces the plots of the best orientation and the Flux vs Orientation as well
'''
wcs = pw.WCS(hdulist[0].header)
data_array = extr_array(True,
fitsim,
ra,
dec,
nn_ra,
nn_dec,
nn_dist,
maj,
s=s,
head=head,
hdulist=hdulist)
postfits = './temp.fits'
print('Creating temporary ./temp.fits file')
postage(True, fitsim, postfits, ra, dec, s=s, nn_ra=nn_ra, nn_dec=nn_dec)
# use a radius for the line that is the NN distance,
# but with 4 pixels more added to the radius
# to make sure we do capture the whole source
radius = nn_dist / 2. * 40 #arcmin --> image units
radius = int(radius) + 4 # is chosen arbitrarily
# in the P173+55 1 arcmin = 40 image units
# this is true for field in FieldNames.
# check if there are no NaNs in the cutout image,
# if there are then make smaller cutout
if True in (np.isnan(data_array)):
if s < (2 / 60.):
print "No hope left for this source "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
elif s == (2 / 60.):
print "Nan in the cutout image AGAIN ", head['OBJECT'], ' i = ', i
try:
return find_orientationNN(i,
fitsim,
ra,
dec,
nn_ra,
nn_dec,
nn_dist,
maj,
s=(2 * radius + 2) / 40. / 60.,
plot=plot,
head=head,
hdulist=hdulist)
except RuntimeError:
print "No hope left for this source, "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
else:
print "NaN in the cutout image: ", head['OBJECT'], ' i = ', i
try:
return find_orientationNN(i,
fitsim,
ra,
dec,
nn_ra,
nn_dec,
nn_dist,
maj,
s=(2 * radius + 4) / 40. / 60.,
plot=plot,
head=head,
hdulist=hdulist)
except RuntimeError:
print "No hope left for this source, "
return i, 0.0, 100.5, 100.5, 'no_hope', 100.5, 100.5
# find the cutoff value, dependent on the distance, should think about whether i want to use Maj
cutoff = 2 * np.arctan(
(maj / 60.) / nn_dist) * 180 / np.pi # convert rad to deg
# find the max orientation of the flux along a line and '80% flux error'
(max_angle, err_orientations, min_orientation, max_orientation,
classification, positions) = flux_along_line(data_array, radius, cutoff,
hdulist)
# then find the amount of maxima and the lobe_ratio
position_angle, lobe_ratio, lobe1, lobe2, indx_extrema = find_lobes(
data_array, positions, max_angle, hdulist)
# to make sure the lobes aren't switched
if (min_orientation < 90 and max_orientation > 90):
max_orientation -= 180
elif (min_orientation > 90 and max_orientation < 90):
min_orientation -= 180
original_position_angle = position_angle
try:
lobe1_min, lobe2_min = find_lobes(data_array, positions,
min_orientation, hdulist)[2:4]
error = lobe1 - lobe1_min
except ValueError:
print 'tja1'
try:
lobe1_min, lobe2_min = find_lobes(data_array, positions,
max_orientation, hdulist)[2:4]
error = lobe1 - lobe1_min
except ValueError:
print 'tja2'
xcenter, ycenter = positions['xcenter'], positions['ycenter']
x0, y0 = positions['x0'], positions['y0']
x1, y1 = positions['x1'], positions['y1']
num = 1000
if plot:
# the plot of the rotated source and the flux along the line
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0), max_angle)
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1), max_angle)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
zi = map_coordinates(data_array,
np.vstack((y_rot, x_rot)),
prefilter=True)
fig, axes = plt.subplots(nrows=2, figsize=(12, 12))
from astropy.wcs import WCS
from astropy.io import fits
hdu = fits.open(postfits)[0]
wcs = WCS(hdu.header)
ax1 = plt.subplot(211, projection=wcs)
ax1.imshow(hdu.data, origin='lower')
print('Removing temporary ./temp.fits file')
os.system('rm ./temp.fits')
ax2 = plt.subplot(212)
ax2.imshow(data_array, origin='lower')
ax1.plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'r-', alpha=0.3)
ax2.plot(zi)
# rotate line on the left side of the center with min angle
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0),
min_orientation)
# rotate line on the right side of the center with min angle
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1),
min_orientation)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
ax1.plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'b-', alpha=0.3)
# rotate line on the left side of the center with max angle
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0),
max_orientation)
# rotate line on the right side of the center with max angle
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1),
max_orientation)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
ax1.plot([x0_rot, x1_rot], [y0_rot, y1_rot], 'b-', alpha=0.3)
ax1.set_xlabel('pixels')
ax1.set_ylabel('pixels')
ax2.set_ylabel('Flux (arbitrary units)')
ax2.set_xlabel('points')
plt.suptitle('Field: ' + head['OBJECT'] + ' | Source ' + str(i) +
'\n extrema: ' + str(indx_extrema) +
' | nn_dist: %.3f' % nn_dist +
'\n lobe ratio: %.3f' % lobe_ratio +
' | Position Angle: %.3f' % position_angle +
' Err orientation: %.1f' % len(err_orientations))
# plt.savefig('./'+head['OBJECT']+'src_'+str(i)+'.png')
plt.show()
plt.clf()
plt.close()
return i, max_angle, len(err_orientations), len(
indx_extrema[0]), classification, lobe_ratio, position_angle, error
def flux_along_line(data_array, radius, cutoff, hdulist):
"""
Find the Position angle with the flux along a line method (Better: Gaussian fit.)
Position angle is defined as the angle between the brightest lobes.
Arguments:
data_array -- The Numpy array that contains the source
radius -- The radius of the line in pixel units.
cutoff -- The cutoff value for a 'Large' or 'Small' error.
hdulist -- Necessary to get the coordinates
Returns:
position_angle -- The position angle
err_orientations -- The angles that produce 80% of the flux
classification -- 'Large' or 'Small' error
max_angle -- The orientation that produces the maximal flux (assumes source
is symmetric...)
lobe_ratio -- Flux ratio between the lobes.
"""
# Parse the WCS keywords in the primary HDU
wcs = pw.WCS(hdulist[0].header)
#the center of the image is at the halfway point -1 for using array-index
xcenter = np.shape(data_array)[0] / 2 - 1 # pixel coordinates
ycenter = np.shape(data_array)[1] / 2 - 1 # pixel coordinates
# define the start and end points of the line with 'num' points and radius = radius
x0, y0 = xcenter - radius, ycenter
x1, y1 = xcenter + radius, ycenter
num = 1000
# the final orientation will be max_angle
max_angle = 0
max_value = 0
# flux values for 0 to 179 degrees of rotation (which is also convenietly their index)
all_values = []
for angle in range(0, 180):
# rotate line on the left side of the center
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0), angle)
# rotate line on the right side of the center
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1), angle)
# the rotated line
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
# extract the values along the line,
zi = map_coordinates(data_array,
np.vstack((y_rot, x_rot)),
prefilter=True)
# calc the mean flux
meanie = np.sum(zi)
if meanie > max_value:
max_value = meanie
max_angle = angle
all_values.append(meanie)
# calculate all orientiations for which the average flux lies within
# 80 per cent of the peak average flux
err_orientations = np.where(all_values > (0.8 * max_value))[0]
all_cutoff_values = np.asarray(all_values)[err_orientations]
minima = np.argsort(all_cutoff_values)
minimum1 = minima[0]
minimum2 = minima[1]
# Orientation can vary between the two flux minima.
min_orientation = err_orientations[minimum1]
max_orientation = err_orientations[minimum2]
if len(err_orientations) > cutoff:
classification = 'Large err'
else:
classification = 'Small err'
positions = dict()
positions['xcenter'], positions['ycenter'] = xcenter, ycenter
positions['x0'], positions['y0'] = x0, y0
positions['x1'], positions['y1'] = x1, y1
return (max_angle, err_orientations, min_orientation, max_orientation,
classification, positions)
def find_lobes(data_array, positions, angle, hdulist, num=1000):
# then find the amount of maxima and the lobe_ratio
xcenter, ycenter = positions['xcenter'], positions['ycenter']
x0, y0 = positions['x0'], positions['y0']
x1, y1 = positions['x1'], positions['y1']
# rotate line on the left side of the center
x0_rot, y0_rot = rotate_point((xcenter, ycenter), (x0, y0), angle)
# rotate line on the right side of the center
x1_rot, y1_rot = rotate_point((xcenter, ycenter), (x1, y1), angle)
x_rot, y_rot = np.linspace(x0_rot, x1_rot,
num), np.linspace(y0_rot, y1_rot, num)
zi = map_coordinates(data_array, np.vstack((y_rot, x_rot)), prefilter=True)
# find the local maxima in the flux along the line
indx_extrema = argrelextrema(zi, np.greater)
if zi[0] > zi[1]:
# then there is a maximum (outside of the line range) , namely the first point
new_indx_extrema = (np.append(indx_extrema, 0), )
del indx_extrema
indx_extrema = new_indx_extrema
del new_indx_extrema
if zi[len(zi) - 1] > zi[len(zi) - 2]:
# then there is a maximum (outside of the line range), namely the last point
new_indx_extrema = (np.append(indx_extrema, len(zi) - 1), )
del indx_extrema
indx_extrema = new_indx_extrema
del new_indx_extrema
amount_of_maxima = len(indx_extrema[0])
# calculate the flux ratio of the lobes
lobe_ratio_bool = False
lobe_ratio = 0.0 # in case there is only 1 maximum
position_angle = 1000.0 # in case there is only 1 maximum
wcs = pw.WCS(hdulist[0].header)
if amount_of_maxima > 1:
if amount_of_maxima == 2:
lobe_ratio = (zi[indx_extrema][0] / zi[indx_extrema][1])
# calculate the position angle
lobe1 = np.array(
[[x_rot[indx_extrema][0], y_rot[indx_extrema][0], 0, 0]])
lobe2 = np.array(
[[x_rot[indx_extrema][1], y_rot[indx_extrema][1], 0, 0]])
lobe1 = wcs.wcs_pix2sky(lobe1, 1)
lobe2 = wcs.wcs_pix2sky(lobe2, 1)
position_angle = PositionAngle(lobe1[0][0], lobe1[0][1],
lobe2[0][0], lobe2[0][1])
if position_angle < 0:
position_angle += 180.
else:
# more maxima, so the lobe_ratio is defined as the ratio between the brightest lobes
indx_maximum_extrema = np.flip(
np.argsort(zi[indx_extrema]),
0)[:2] #argsort sorts ascending so flip makes it descending
indx_maximum_extrema = indx_extrema[0][indx_maximum_extrema]
lobe_ratio = (zi[indx_maximum_extrema[0]] /
zi[indx_maximum_extrema][1])
#find the RA and DEC of the two brightest lobes
lobe1 = np.array([[
x_rot[indx_maximum_extrema][0], y_rot[indx_maximum_extrema][0],
0, 0
]])
lobe2 = np.array([[
x_rot[indx_maximum_extrema][1], y_rot[indx_maximum_extrema][1],
0, 0
]])
lobe1 = wcs.wcs_pix2sky(lobe1, 1)
lobe2 = wcs.wcs_pix2sky(lobe2, 1)
# then calculate the position angle
position_angle = PositionAngle(lobe1[0][0], lobe1[0][1],
lobe2[0][0], lobe2[0][1])
if position_angle < 0:
position_angle += 180.
else:
raise ValueError("This function only works on sources with >1 maximum")
lobe1 = lobe1[0][:2]
lobe2 = lobe2[0][:2]
return position_angle, lobe_ratio, lobe1, lobe2, indx_extrema
def move_backward(self, game_map: Map, distance: float):
vector = utils.rotate_point((0, distance), self.angle)
self.x += vector[0]
self.y += vector[1]
self.resolve_collisions(game_map)
def main():
args = parser.parse_args()
env_name = args.env_name
input_file = args.input_file
checkpoint_file = args.resume
test_only = args.test_only
seed = args.seed
no_gpu = args.no_gpu
dir_name = args.dir_name
visualize = args.visualize
n_test_steps = args.n_test_steps
log_perf_file = args.log_perf_file
min_distance = args.min_distance
max_distance = args.max_distance
threshold = args.threshold
y_range = args.y_range
n_training_samples = args.n_training_samples
start_index = args.start_index
exp_name = args.exp_name
batch_size = args.batch_size
learning_rate = args.learning_rate
n_epochs = args.n_epochs
# Specific to Humanoid - Pybullet
if visualize and env_name == 'HumanoidBulletEnv-v0':
spec = gym.envs.registry.env_specs[env_name]
class_ = gym.envs.registration.load(spec._entry_point)
env = class_(**{**spec._kwargs}, **{'render': True})
else:
env = gym.make(env_name)
set_global_seed(seed)
env.seed(seed)
input_shape = env.observation_space.shape[0] + 3
output_shape = env.action_space.shape[0]
net = Policy(input_shape, output_shape)
if not no_gpu:
net = net.cuda()
optimizer = Adam(net.parameters(), lr=learning_rate)
criterion = nn.MSELoss()
epochs = 0
if checkpoint_file:
epochs, net, optimizer = load_checkpoint(checkpoint_file, net,
optimizer)
if not checkpoint_file and test_only:
print('ERROR: You have not entered a checkpoint file.')
return
if not test_only:
if not os.path.isfile(input_file):
raise FileNotFoundError(errno.ENOENT, os.strerror(errno.ENOENT),
input_file)
training_file = open(input_file, 'rb')
old_states = []
norms = []
goals = []
actions = []
n_samples = -1
while n_samples - start_index < n_training_samples:
try:
old_s, old_g, new_s, new_g, action = pickle.load(training_file)
n_samples += 1
if n_samples < start_index:
continue
old_states.append(np.squeeze(np.array(old_s)))
norms.append(
find_norm(np.squeeze(np.array(new_g) - np.array(old_g))))
goals.append(
preprocess_goal(
np.squeeze(np.array(new_g) - np.array(old_g))))
actions.append(np.squeeze(np.array(action)))
except (EOFError, ValueError):
break
old_states = np.array(old_states)
norms = np.array(norms)
goals = np.array(goals)
actions = np.array(actions)
normalization_factors = {
'state': [old_states.mean(axis=0),
old_states.std(axis=0)],
'distance_per_step': [norms.mean(axis=0),
norms.std(axis=0)]
}
n_file = open(env_name + '_normalization_factors.pkl', 'wb')
pickle.dump(normalization_factors, n_file)
n_file.close()
old_states = normalize(old_states,
env_name + '_normalization_factors.pkl',
'state')
# Summary writer for tensorboardX
writer = {}
writer['writer'] = SummaryWriter()
# Split data into training and validation
indices = np.arange(old_states.shape[0])
shuffle(indices)
val_data = np.concatenate(
(old_states[indices[:int(old_states.shape[0] / 5)]],
goals[indices[:int(old_states.shape[0] / 5)]]),
axis=1)
val_labels = actions[indices[:int(old_states.shape[0] / 5)]]
training_data = np.concatenate(
(old_states[indices[int(old_states.shape[0] / 5):]],
goals[indices[int(old_states.shape[0] / 5):]]),
axis=1)
training_labels = actions[indices[int(old_states.shape[0] / 5):]]
del old_states, norms, goals, actions, indices
checkpoint_dir = os.path.join(env_name, 'naive_gcp_checkpoints')
if dir_name:
checkpoint_dir = os.path.join(checkpoint_dir, dir_name)
prepare_dir(checkpoint_dir)
for e in range(epochs, n_epochs):
ep_loss = []
# Train network
for i in range(int(len(training_data) / batch_size) + 1):
inp = training_data[batch_size * i:batch_size * (i + 1)]
out = net(
convert_to_variable(inp, grad=False, gpu=(not no_gpu)))
target = training_labels[batch_size * i:batch_size * (i + 1)]
target = convert_to_variable(np.array(target),
grad=False,
gpu=(not no_gpu))
loss = criterion(out, target)
optimizer.zero_grad()
ep_loss.append(loss.item())
loss.backward()
optimizer.step()
# Validation
val_loss = []
for i in range(int(len(val_data) / batch_size) + 1):
inp = val_data[batch_size * i:batch_size * (i + 1)]
out = net(
convert_to_variable(inp, grad=False, gpu=(not no_gpu)))
target = val_labels[batch_size * i:batch_size * (i + 1)]
target = convert_to_variable(np.array(target),
grad=False,
gpu=(not no_gpu))
loss = criterion(out, target)
val_loss.append(loss.item())
writer['iter'] = e + 1
writer['writer'].add_scalar('data/val_loss',
np.array(val_loss).mean(), e + 1)
writer['writer'].add_scalar('data/training_loss',
np.array(ep_loss).mean(), e + 1)
save_checkpoint(
{
'epochs': (e + 1),
'state_dict': net.state_dict(),
'optimizer': optimizer.state_dict()
},
filename=os.path.join(checkpoint_dir,
str(e + 1) + '.pth.tar'))
print('Epoch:', e + 1)
print('Training loss:', np.array(ep_loss).mean())
print('Val loss:', np.array(val_loss).mean())
print('')
# Now we use the trained net to see how the agent reaches a different
# waypoint from the current one.
success = 0
failure = 0
closest_distances = []
time_to_closest_distances = []
f = open(env_name + '_normalization_factors.pkl', 'rb')
normalization_factors = pickle.load(f)
average_distance = normalization_factors['distance_per_step'][0]
for i in range(n_test_steps):
state = env.reset()
if env_name == 'Ant-v2':
obs = env.unwrapped.get_body_com('torso')
target_obs = [
obs[0] + np.random.uniform(min_distance, max_distance),
obs[1] + np.random.uniform(-y_range, y_range), obs[2]
]
target_obs = rotate_point(target_obs, env.unwrapped.angle)
env.unwrapped.sim.model.body_pos[-1] = target_obs
elif env_name == 'MinitaurBulletEnv-v0':
obs = env.unwrapped.get_minitaur_position()
target_obs = [
obs[0] + np.random.uniform(min_distance, max_distance),
obs[1] + np.random.uniform(-y_range, y_range), obs[2]
]
target_obs = rotate_point(
target_obs, env.unwrapped.get_minitaur_rotation_angle())
env.unwrapped.set_target_position(target_obs)
elif env_name == 'HumanoidBulletEnv-v0':
obs = env.unwrapped.robot.get_robot_position()
target_obs = [
obs[0] + np.random.uniform(min_distance, max_distance),
obs[1] + np.random.uniform(-y_range, y_range), obs[2]
]
target_obs = rotate_point(target_obs, env.unwrapped.robot.yaw)
env.unwrapped.robot.set_target_position(target_obs[0],
target_obs[1])
steps = 0
done = False
closest_d = distance(obs, target_obs)
closest_t = 0
while distance(obs, target_obs) > threshold and not done:
goal = preprocess_goal(target_obs - obs)
state = normalize(np.array(state),
env_name + '_normalization_factors.pkl')
inp = np.concatenate([np.squeeze(state), goal])
inp = convert_to_variable(inp, grad=False, gpu=(not no_gpu))
action = net(inp).cpu().detach().numpy()
state, _, done, _ = env.step(action)
steps += 1
if env_name == 'MinitaurBulletEnv-v0':
obs = env.unwrapped.get_minitaur_position()
elif env_name == 'HumanoidBulletEnv-v0':
obs = env.unwrapped.robot.get_robot_position()
if distance(obs, target_obs) < closest_d:
closest_d = distance(obs, target_obs)
closest_t = steps
if visualize:
env.render()
if distance(obs, target_obs) <= threshold:
success += 1
elif done:
failure += 1
if visualize:
time.sleep(2)
closest_distances.append(closest_d)
time_to_closest_distances.append(closest_t)
print('Successes: %d, Failures: %d, '
'Closest distance: %f, Time to closest distance: %d' %
(success, failure, np.mean(closest_distances),
np.mean(time_to_closest_distances)))
if log_perf_file:
f = open(log_perf_file, 'a+')
f.write(exp_name + ':Seed-' + str(seed) + ',Success-' + str(success) +
',Failure-' + str(failure) + ',Closest_distance-' +
str(closest_distances) + ',Time_to_closest_distance-' +
str(time_to_closest_distances) + '\n')
f.close()