def main():
cc = CMsg()
# hail to the chief
cc.info("RFIDLE V%s - RFID Exploitation Framework\n" % (VERSION, ))
cc.info("(c) 2010 - Christian Eichelmann\n\n")
# create new proxmark instance
prox = Proxmark()
# open proxmark device
try:
endpoints = prox.open_proxmark()
except DeviceError as e:
cc.err(e.value + "\n")
sys.exit(e.error)
else:
cc.ok("Connected to Proxmark3 at [0x%x/0x%x]\n" %
(endpoints[0], endpoints[1]))
#prox.hf14a_reader()
prox.tune()
def main():
cc = CMsg()
# hail to the chief
cc.info("RFIDLE V%s - RFID Exploitation Framework\n" % (VERSION, ))
cc.info("(c) 2010 - Christian Eichelmann\n\n")
# create new proxmark instance
prox = Proxmark()
# open proxmark device
try:
endpoints = prox.open_proxmark()
except DeviceError as e:
cc.err(e.value + "\n")
sys.exit(e.error)
else:
cc.ok("Connected to Proxmark3 at [0x%x/0x%x]\n" % (endpoints[0], endpoints[1]))
#prox.hf14a_reader()
prox.tune()
def __init__(self):
self.dev = None
self.ep_in = None
self.ep_out = None
self.iface = None
self.cc = CMsg()
class Proxmark:
"""
proxmark: main class to communicate with the proxmark (currently old firmware version)
"""
def __init__(self):
self.dev = None
self.ep_in = None
self.ep_out = None
self.iface = None
self.cc = CMsg()
def dump_data(self, data):
self.cc.output("")
for i in range(1, len(data) + 1):
if i % 8:
print "0x%02x" % ord(data[i - 1]),
else:
print "0x%02x" % ord(data[i - 1])
if i < len(data):
self.cc.output("")
def send_data(self, usbcmd):
""" sending UsbCommand structured data to proxmark """
cmdstr = usbcmd.get_str_data()
return self.dev.write(self.ep_out.bEndpointAddress, cmdstr,
self.iface.bInterfaceNumber, 1000)
def read_once(self):
""" read UsbCommand structured data from proxmark """
try:
usbcmd = UsbCommand()
data = self.dev.read(self.ep_in.bEndpointAddress,
USB_DATA_BLOCK_SIZE,
self.iface.bInterfaceNumber, 500)
usbcmd.set_str_data(data)
return usbcmd
except usb.core.USBError:
return None
def read_loop(self, waitforcmd=None):
""" read thread """
while True:
data = self.read_once()
if data:
# print debug string
if data.cmd == CMD_DEBUG_PRINT_STRING:
if data.ext1 > 70 or data.ext1 < 0:
data.ext1 = 0
dbg = data.data[:data.ext1]
self.cc.output(dbg + "\n")
# print debug integers
if data.cmd == CMD_DEBUG_PRINT_INTEGERS:
self.cc.output("%08x, %08x, %08x\n" %
(data.ext1, data.ext2, data.ext3))
# wait for special cmd code from proxmark?
if waitforcmd:
if data.cmd == waitforcmd:
return data
else:
return data
def hf14a_reader(self):
""" act like a iso14443a card reader """
### act like a reader ###
self.cc.info("reading iso14443a rfid data...\n")
usbcmd = UsbCommand()
usbcmd.cmd = CMD_READER_ISO_14443a
usbcmd.ext1 = ISO14A_CONNECT
self.__send_data__(usbcmd)
data = self.read_loop(CMD_DEBUG_PRINT_STRING)
if data.data[0] == 0x0:
self.cc.err("iso14443a card select failed\n")
return
### hexdump the card samples ###
self.cc.info("retrieving card data...\n")
usbcmd = UsbCommand()
usbcmd.cmd = CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K
self.send_data(usbcmd)
data = self.read_thread(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K)
self.dump_data(data.data)
self.ok("MiFare UID: %s\n" % (hexlify(data.data[41:45], )))
def tune(self):
""" antenna tuning """
usbcmd = UsbCommand()
usbcmd.cmd = CMD_MEASURE_ANTENNA_TUNING
self.send_data(usbcmd)
data = self.read_loop(CMD_MEASURED_ANTENNA_TUNING)
# process results
vLf125 = data.ext1 & 0xffff
vLf134 = data.ext1 >> 16
vHf = data.ext2 & 0xffff
peakf = data.ext3 & 0xffff
peakv = data.ext3 >> 16
# print result
self.cc.ok("LF antenna: %5.2f V @ 125.00 kHz\n" % (vLf125 / 1000.0))
self.cc.ok("LF antenna: %5.2f V @ 134.00 kHz\n" % (vLf134 / 1000.0))
self.cc.ok("LF optimal: %5.2f V @%9.2f kHz\n" %
((peakv / 1000.0), (12000.0 / (peakf + 1))))
self.cc.ok("HF antenna: %5.2f V @ 13.56 MHz\n" % (vHf / 1000.0))
# print warnings/errors
if peakv < 2000:
self.cc.err("Your LF antenna is unusable.\n")
elif peakv < 10000:
self.cc.warn("Your LF antenna is marginal.\n")
if vHf < 2000:
self.cc.err("Your HF antenna is unusable.\n")
elif vHf < 5000:
self.cc.warn("Your HF antenna is marginal.\n")
def open_proxmark(self):
""" open proxmark3 device and get read/write endpoints """
# check for connected proxmark
self.dev = usb.core.find(idVendor=0x9ac4, idProduct=0x4b8f)
if not self.dev:
raise DeviceError('Proxmark not Found', ERR_NOT_FOUND)
# get configuration and interface
self.cfg = self.dev.get_active_configuration()
self.iface = self.cfg[(0, 0)]
# get reading and writing endoint
self.ep_out = usb.util.find_descriptor(
self.dev.get_interface_altsetting(),
custom_match=lambda e: usb.util.endpoint_direction(
e.bEndpointAddress) == usb.util.ENDPOINT_OUT)
self.ep_in = usb.util.find_descriptor(
self.dev.get_interface_altsetting(),
custom_match=lambda e: usb.util.endpoint_direction(
e.bEndpointAddress) == usb.util.ENDPOINT_IN)
if not self.ep_in or not self.ep_out:
raise DeviceError("Unable to get read/write endpoints",
ERR_NO_ENDPOINT)
# try to detach kernel driver
if self.dev.is_kernel_driver_active(self.iface.bInterfaceNumber):
self.dev.detach_kernel_driver(self.iface.bInterfaceNumber)
# set configuration
self.dev.set_configuration(self.cfg)
# set alternate setting
self.dev.set_interface_altsetting(self.iface)
return (self.ep_out.bEndpointAddress, self.ep_in.bEndpointAddress)
def __init__(self):
self.dev = None
self.ep_in = None
self.ep_out = None
self.iface = None
self.cc = CMsg()
class Proxmark:
"""
proxmark: main class to communicate with the proxmark (currently old firmware version)
"""
def __init__(self):
self.dev = None
self.ep_in = None
self.ep_out = None
self.iface = None
self.cc = CMsg()
def dump_data(self, data):
self.cc.output("")
for i in range(1, len(data)+1):
if i % 8:
print "0x%02x" % ord(data[i-1]),
else:
print "0x%02x" % ord(data[i-1])
if i < len(data):
self.cc.output("")
def send_data(self, usbcmd):
""" sending UsbCommand structured data to proxmark """
cmdstr = usbcmd.get_str_data()
return self.dev.write(self.ep_out.bEndpointAddress, cmdstr, self.iface.bInterfaceNumber, 1000)
def read_once(self):
""" read UsbCommand structured data from proxmark """
try:
usbcmd = UsbCommand()
data = self.dev.read(self.ep_in.bEndpointAddress, USB_DATA_BLOCK_SIZE, self.iface.bInterfaceNumber, 500)
usbcmd.set_str_data(data)
return usbcmd
except usb.core.USBError:
return None
def read_loop(self, waitforcmd = None):
""" read thread """
while True:
data = self.read_once()
if data:
# print debug string
if data.cmd == CMD_DEBUG_PRINT_STRING:
if data.ext1 > 70 or data.ext1 < 0:
data.ext1 = 0
dbg = data.data[:data.ext1]
self.cc.output(dbg + "\n")
# print debug integers
if data.cmd == CMD_DEBUG_PRINT_INTEGERS:
self.cc.output("%08x, %08x, %08x\n" % (data.ext1, data.ext2, data.ext3))
# wait for special cmd code from proxmark?
if waitforcmd:
if data.cmd == waitforcmd:
return data
else:
return data
def hf14a_reader(self):
""" act like a iso14443a card reader """
### act like a reader ###
self.cc.info("reading iso14443a rfid data...\n")
usbcmd = UsbCommand()
usbcmd.cmd = CMD_READER_ISO_14443a
usbcmd.ext1 = ISO14A_CONNECT
self.__send_data__(usbcmd)
data = self.read_loop(CMD_DEBUG_PRINT_STRING)
if data.data[0] == 0x0:
self.cc.err("iso14443a card select failed\n")
return
### hexdump the card samples ###
self.cc.info("retrieving card data...\n")
usbcmd = UsbCommand()
usbcmd.cmd = CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K
self.send_data(usbcmd)
data = self.read_thread(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K)
self.dump_data(data.data)
self.ok("MiFare UID: %s\n" % (hexlify(data.data[41:45], )))
def tune(self):
""" antenna tuning """
usbcmd = UsbCommand()
usbcmd.cmd = CMD_MEASURE_ANTENNA_TUNING
self.send_data(usbcmd)
data = self.read_loop(CMD_MEASURED_ANTENNA_TUNING)
# process results
vLf125 = data.ext1 & 0xffff
vLf134 = data.ext1 >> 16
vHf = data.ext2 & 0xffff
peakf = data.ext3 & 0xffff
peakv = data.ext3 >> 16
# print result
self.cc.ok("LF antenna: %5.2f V @ 125.00 kHz\n" % (vLf125 / 1000.0))
self.cc.ok("LF antenna: %5.2f V @ 134.00 kHz\n" % (vLf134 / 1000.0))
self.cc.ok("LF optimal: %5.2f V @%9.2f kHz\n" % ((peakv / 1000.0), (12000.0 / (peakf + 1)) ))
self.cc.ok("HF antenna: %5.2f V @ 13.56 MHz\n"% (vHf / 1000.0))
# print warnings/errors
if peakv < 2000:
self.cc.err("Your LF antenna is unusable.\n")
elif peakv < 10000:
self.cc.warn("Your LF antenna is marginal.\n")
if vHf < 2000:
self.cc.err("Your HF antenna is unusable.\n")
elif vHf < 5000:
self.cc.warn("Your HF antenna is marginal.\n")
def open_proxmark(self):
""" open proxmark3 device and get read/write endpoints """
# check for connected proxmark
self.dev = usb.core.find(idVendor=0x9ac4, idProduct=0x4b8f)
if not self.dev:
raise DeviceError('Proxmark not Found', ERR_NOT_FOUND)
# get configuration and interface
self.cfg = self.dev.get_active_configuration()
self.iface = self.cfg[(0, 0)]
# get reading and writing endoint
self.ep_out = usb.util.find_descriptor(self.dev.get_interface_altsetting(), custom_match=lambda e: usb.util.endpoint_direction(e.bEndpointAddress) == usb.util.ENDPOINT_OUT)
self.ep_in = usb.util.find_descriptor(self.dev.get_interface_altsetting(), custom_match=lambda e: usb.util.endpoint_direction(e.bEndpointAddress) == usb.util.ENDPOINT_IN)
if not self.ep_in or not self.ep_out:
raise DeviceError("Unable to get read/write endpoints", ERR_NO_ENDPOINT)
# try to detach kernel driver
if self.dev.is_kernel_driver_active(self.iface.bInterfaceNumber):
self.dev.detach_kernel_driver(self.iface.bInterfaceNumber)
# set configuration
self.dev.set_configuration(self.cfg)
# set alternate setting
self.dev.set_interface_altsetting(self.iface)
return (self.ep_out.bEndpointAddress, self.ep_in.bEndpointAddress)
