def attach_disk_test():
"""
Attach-disk testcase.
1.Attch a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:return: Command status and output.
"""
try:
source_file = open(test_disk_source, 'wb')
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0))
source_file.close()
virsh.attach_disk(vm_name, test_disk_source, front_dev, debug=True)
vm_ref = vm_name
result_source = virsh.domblkinfo(vm_ref, test_disk_source,
ignore_status=True, debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref, front_dev,
ignore_status=True, debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
virsh.detach_disk(vm_name, front_dev, debug=True)
return status_target, output_target, status_source, output_source
except (error.CmdError, IOError):
return 1, "", 1, ""
def attach_disk_test():
"""
Attach-disk testcase.
1.Attch a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:return: Command status and output.
"""
try:
with open(test_disk_source, 'wb') as source_file:
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0).encode())
virsh.attach_disk(vm_name, test_disk_source, front_dev, debug=True)
vm_ref = vm_name
result_source = virsh.domblkinfo(vm_ref, test_disk_source,
ignore_status=True, debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref, front_dev,
ignore_status=True, debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
virsh.detach_disk(vm_name, front_dev, debug=True)
return status_target, output_target, status_source, output_source
except (process.CmdError, IOError):
return 1, "", 1, ""
def attach_disk_test(test_disk_source, front_dev):
"""
Attach-disk testcase.
1.Attach a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:param: test_disk_source disk source file path.
:param: front_dev front end device name.
:return: Command status and output.
"""
try:
disk_source = test_disk_source
front_device = front_dev
with open(disk_source, 'wb') as source_file:
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0).encode())
out = virsh.attach_disk(vm_name,
disk_source,
front_device,
debug=True)
utils_misc.wait_for(
lambda: (out.stdout == "Disk attached successfully"), 10)
vm_ref = vm_name
if "--all" in extra:
disk_source = ""
vm_ref = "%s %s" % (vm_name, extra)
result_source = virsh.domblkinfo(vm_ref,
disk_source,
ignore_status=True,
debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
if "--all" in extra:
front_device = ""
result_target = virsh.domblkinfo(vm_ref,
front_device,
ignore_status=True,
debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
front_device = front_dev
virsh.detach_disk(vm_name, front_device, debug=True)
return status_target, output_target, status_source, output_source
except (process.CmdError, IOError):
return 1, "", 1, ""
def execute_statistics_command(params):
"""
Execute statistics command
:param params: dict, used to setup the connection
"""
vm_name = params.get("migrate_main_vm")
disk_type = params.get("disk_type")
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disks = vmxml.get_disk_all_by_expr('type==%s' % disk_type, 'device==disk')
logging.debug("disks: %s", disks)
debug_kargs = {'ignore_status': False, 'debug': True}
for disk in list(disks.values()):
disk_source = disk.find('source').get('dev')
disk_target = disk.find('target').get('dev')
logging.debug("disk_source: %s", disk_source)
logging.debug("disk_target: %s", disk_target)
virsh.domblkstat(vm_name, disk_target, "", **debug_kargs)
virsh.domblkinfo(vm_name, disk_source, **debug_kargs)
virsh.domstats(vm_name, **debug_kargs)
virsh.dommemstat(vm_name, **debug_kargs)
def check_slice_hot_operate(vm, params, test):
"""
Check hot operation on disk with slice attribute
:param vm: one object representing VM
:param params: wrapped parameters in dictionary format
:param test: test assert object
"""
device_target = params.get("target_dev")
try:
session = vm.wait_for_login()
_, output = session.cmd_status_output(
"dd if=/dev/zero of=/dev/%s bs=10M count=1" % device_target)
LOG.info("Fill contents in VM:\n%s", output)
session.close()
except Exception as e:
LOG.error(str(e))
session.close()
domstats_raw_output = virsh.domstats(vm.name,
"--block",
ignore_status=False,
debug=True).stdout_text.strip()
domstats_dict = translate_raw_output_into_dict(domstats_raw_output)
domblkinfo_raw_output = virsh.domblkinfo(vm.name,
device_target,
ignore_status=False,
debug=True).stdout_text.strip()
domblkinfo_dict = translate_raw_output_into_dict(domblkinfo_raw_output,
default_delimiter=":")
# Verify allocation, capacity, and physical are the same from domstats and domblkinfo
for key in ['Allocation', 'Capacity', 'Physical']:
if domstats_dict["block.1.%s" % key.lower()] != domblkinfo_dict[key]:
test.fail("The domstats value: %s is not equal to domblkinfo: %s" %
(domstats_dict["block.1.%s" % key.lower()],
domblkinfo_dict[key]))
def run(test, params, env):
"""
Test command: virsh domblkinfo.
1.Prepare test environment.
2.Get vm's driver.
3.According to driver perform virsh domblkinfo operation.
4.Recover test environment.
5.Confirm the test result.
"""
def attach_disk_test(test_disk_source, front_dev):
"""
Attach-disk testcase.
1.Attch a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:param: test_disk_source disk source file path.
:param: front_dev front end device name.
:return: Command status and output.
"""
try:
disk_source = test_disk_source
front_device = front_dev
with open(disk_source, 'wb') as source_file:
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0).encode())
virsh.attach_disk(vm_name, disk_source, front_device, debug=True)
vm_ref = vm_name
if "--all" in extra:
disk_source = ""
vm_ref = "%s %s" % (vm_name, extra)
result_source = virsh.domblkinfo(vm_ref,
disk_source,
ignore_status=True,
debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
if "--all" in extra:
front_device = ""
result_target = virsh.domblkinfo(vm_ref,
front_device,
ignore_status=True,
debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
front_device = front_dev
virsh.detach_disk(vm_name, front_device, debug=True)
return status_target, output_target, status_source, output_source
except (process.CmdError, IOError):
return 1, "", 1, ""
def check_disk_info():
"""
Ckeck virsh domblkinfo output.
"""
if driver == "qemu" and output_source.strip() != output_target.strip():
test.fail("Command domblkinfo target/source"
" got different information!")
if output_source != "":
lines = output_source.splitlines()
if "--human" in extra and not any(
re.findall(r'GiB|MiB', lines[0], re.IGNORECASE)):
test.fail("Command domblkinfo human output is wrong")
if "--all" in extra:
blocklist = vm_xml.VMXML.get_disk_blk(vm_name)
if not all(
re.findall(r''.join(block), output_source,
re.IGNORECASE) for block in blocklist):
test.fail("Command domblkinfo --all output is wrong")
return
if disk_size_check:
capacity_cols = lines[0].split(":")
if "--human" in extra:
size = float(capacity_cols[1].strip().split(" ")[0])
else:
size = int(capacity_cols[1].strip())
if disk_size != size:
test.fail("Command domblkinfo output is wrong! "
"'%d' != '%d'" % (disk_size, size))
else:
test.fail("Command domblkinfo has no output!")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Get all parameters from configuration.
vm_ref = params.get("domblkinfo_vm_ref")
device = params.get("domblkinfo_device", "yes")
front_dev = params.get("domblkinfo_front_dev", "vdd")
extra = params.get("domblkinfo_extra", "")
status_error = params.get("status_error", "no")
test_attach_disk = os.path.join(test.virtdir, "tmp.img")
domid = vm.get_id()
domuuid = vm.get_uuid()
driver = virsh.driver()
blklist = vm_xml.VMXML.get_disk_blk(vm_name)
sourcelist = vm_xml.VMXML.get_disk_source(vm_name)
test_disk_target = blklist[0]
test_disk_source = sourcelist[0].find('source').get('file')
test_disk_format = sourcelist[0].find('driver').get('type')
disk_size_check = False
if test_disk_format == "raw":
disk_size_check = True
if device == "no":
test_disk_target = ""
test_disk_source = ""
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
elif vm_ref == "uuid":
vm_ref = domuuid
if any(re.findall(
r'--all|--human', extra,
re.IGNORECASE)) and not libvirt_version.version_compare(4, 5, 0):
test.cancel(
"--all and --human options are supported until libvirt 4.5.0 version"
)
if vm_ref == "test_attach_disk":
test_disk_source = test_attach_disk
disk_size_check = True
(status_target, output_target, status_source,
output_source) = attach_disk_test(test_disk_source, front_dev)
else:
result_source = virsh.domblkinfo(vm_ref,
test_disk_source,
ignore_status=True,
debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref,
test_disk_target,
ignore_status=True,
debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "xen doesn't support domblkinfo target!"
disk_size = 0
if os.path.exists(test_disk_source):
disk_size = os.path.getsize(test_disk_source)
# Recover enviremont
if os.path.exists(test_attach_disk):
os.remove(test_attach_disk)
# Check status_error
if status_error == "yes":
if status_target == 0 or status_source == 0:
test.fail("Run successfully with wrong command!")
elif status_error == "no":
if status_target != 0 or status_source != 0:
test.fail("Run failed with right command")
# Check source information.
check_disk_info()
else:
test.fail("The status_error must be 'yes' or 'no'!")
def run_virsh_domblkinfo(test, params, env):
"""
Test command: virsh domblkinfo.
1.Prepare test environment.
2.Get vm's driver.
3.According to driver perform virsh domblkinfo operation.
4.Recover test environment.
5.Confirm the test result.
"""
def attach_disk_test():
"""
Attach-disk testcase.
1.Attch a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:return: Command status and output.
"""
try:
source_file = open(test_disk_source, 'wb')
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0))
source_file.close()
virsh.attach_disk(vm_name, test_disk_source, front_dev, debug=True)
vm_ref = vm_name
result_source = virsh.domblkinfo(vm_ref,
test_disk_source,
ignore_status=True,
debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref,
front_dev,
ignore_status=True,
debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
virsh.detach_disk(vm_name, front_dev, debug=True)
return status_target, output_target, status_source, output_source
except (error.CmdError, IOError):
return 1, "", 1, ""
def check_disk_info():
"""
Ckeck virsh domblkinfo output.
"""
if driver == "qemu" and output_source.strip() != output_target.strip():
raise error.TestFail("Command domblkinfo target/source"
" got different information!")
if output_source != "":
lines = output_source.splitlines()
capacity_cols = lines[0].split(":")
size = int(capacity_cols[1].strip())
if disk_size != size and disk_size_check:
raise error.TestFail("Command domblkinfo output is wrong! "
"'%d' != '%d'" % (disk_size, size))
else:
raise error.TestFail("Command domblkinfo has no output!")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Get all parameters from configuration.
vm_ref = params.get("domblkinfo_vm_ref")
device = params.get("domblkinfo_device", "yes")
front_dev = params.get("domblkinfo_front_dev", "vdd")
extra = params.get("domblkinfo_extra", "")
status_error = params.get("status_error", "no")
test_attach_disk = os.path.join(test.virtdir, "tmp.img")
domid = vm.get_id()
domuuid = vm.get_uuid()
driver = virsh.driver()
blklist = vm_xml.VMXML.get_disk_blk(vm_name)
sourcelist = vm_xml.VMXML.get_disk_source(vm_name)
test_disk_target = blklist[0]
test_disk_source = sourcelist[0].find('source').get('file')
test_disk_format = sourcelist[0].find('driver').get('type')
disk_size_check = False
if test_disk_format == "raw":
disk_size_check = True
if device == "no":
test_disk_target = ""
test_disk_source = ""
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
elif vm_ref == "uuid":
vm_ref = domuuid
if vm_ref == "test_attach_disk":
test_disk_source = test_attach_disk
disk_size_check = True
(status_target, output_target, status_source,
output_source) = attach_disk_test()
else:
result_source = virsh.domblkinfo(vm_ref,
test_disk_source,
ignore_status=True,
debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref,
test_disk_target,
ignore_status=True,
debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "xen doesn't support domblkinfo target!"
disk_size = 0
if os.path.exists(test_disk_source):
disk_size = os.path.getsize(test_disk_source)
# Recover enviremont
if os.path.exists(test_attach_disk):
os.remove(test_attach_disk)
# Check status_error
if status_error == "yes":
if status_target == 0 or status_source == 0:
raise error.TestFail("Run successfully with wrong command!")
elif status_error == "no":
if status_target != 0 or status_source != 0:
raise error.TestFail("Run failed with right command")
# Check source information.
check_disk_info()
else:
raise error.TestFail("The status_error must be 'yes' or 'no'!")
def run(test, params, env):
"""
Test command: virsh domblklist.
1.Prepare test environment.
2.Run domblklist and check
3.Do attach disk and rerun domblklist with check
4.Clean test environment.
"""
def domblklist_test():
"""
Run domblklist and check result, raise error if check fail.
"""
disk_info_list = []
output_disk_info = {}
output_disk_info_list = []
result = virsh.domblklist(vm_ref,
options,
ignore_status=True,
debug=True)
status = result.exit_status
output = result.stdout.strip()
# Check status_error
if status_error == "yes":
if status == 0:
test.fail("Run successfully with wrong command!")
elif status_error == "no":
if status == 1:
test.fail("Run failed with right command")
# Check disk information.
disk_info = get_disk_info(vm_name, options)
logging.debug("The disk info dict from xml is: %s" % disk_info)
output_list = output.split('\n')
for i in range(2, len(output_list)):
output_disk_info[i - 2] = output_list[i].split()
logging.debug("The disk info dict from command output is: %s" %
output_disk_info)
for (k, v) in list(iteritems(output_disk_info)):
output_disk_info_list.append(v)
if "--details" in options:
for (k, v) in list(iteritems(disk_info)):
disk_info_list.append(v)
else:
for (k, v) in list(iteritems(disk_info)):
disk_info_list.append(v[2:])
disk_info_list.sort()
logging.debug("The disk info list from xml is: %s" %
disk_info_list)
output_disk_info_list.sort()
logging.debug("The disk info list from command output is: %s" %
output_disk_info_list)
if disk_info_list != output_disk_info_list:
test.fail("The output did not match with disk"
" info from xml")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Get all parameters from configuration.
vm_ref = params.get("domblklist_vm_ref")
options = params.get("domblklist_options", "")
info_options = params.get("info_options", "")
status_error = params.get("status_error", "no")
front_dev = params.get("domblkinfo_front_dev", "vdd")
test_attach_disk = os.path.join(test.virtdir, "tmp.img")
domblkinfo = params.get("domblkinfo", "no")
extra = ""
domid = vm.get_id()
domuuid = vm.get_uuid()
vm_state = vm.state()
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = vm_name
elif vm_ref == "uuid":
vm_ref = domuuid
# run domblklist and check
domblklist_test()
# Test domblkinfo function as well
if domblkinfo == "yes":
ret = virsh.domblklist(vm_ref, options, ignore_status=True, debug=True)
target_disks = re.findall(r"[v,s]d[a-z]", ret.stdout)
if info_options == "":
check_list = ["Capacity", "Allocation", "Physical"]
ret2 = virsh.domblkinfo(vm_ref, target_disks[0])
elif info_options == "--human":
check_list = ["Capacity", "Allocation", "Physical", "GiB"]
cmd = "virsh domblkinfo %s %s %s" % (vm_ref, target_disks[0],
info_options)
ret2 = process.run(cmd, shell=True, ignore_status=True)
for check in check_list:
if not re.search(check, results_stdout_52lts(ret2)):
test.fail("Cmd domblkinfo run failed")
if status_error == "no":
try:
# attach disk and check
with open(test_attach_disk, 'wb') as source_file:
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0).encode())
# since bug 1049529, --config will work with detach when
# domain is running, so change it back using --config here
if "--inactive" in options or vm_state == "shut off":
extra = "--config"
virsh.attach_disk(vm_name,
test_attach_disk,
front_dev,
extra,
debug=True)
domblklist_test()
finally:
virsh.detach_disk(vm_name, front_dev, extra, debug=True)
if os.path.exists(test_attach_disk):
os.remove(test_attach_disk)
def run(test, params, env):
"""
Test command: virsh domblkinfo.
1.Prepare test environment.
2.Get vm's driver.
3.According to driver perform virsh domblkinfo operation.
4.Recover test environment.
5.Confirm the test result.
"""
def attach_disk_test():
"""
Attach-disk testcase.
1.Attch a disk to guest.
2.Perform domblkinfo operation.
3.Detach the disk.
:return: Command status and output.
"""
try:
source_file = open(test_disk_source, 'wb')
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0))
source_file.close()
virsh.attach_disk(vm_name, test_disk_source, front_dev, debug=True)
vm_ref = vm_name
result_source = virsh.domblkinfo(vm_ref, test_disk_source,
ignore_status=True, debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref, front_dev,
ignore_status=True, debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "Xen doesn't support domblkinfo target!"
virsh.detach_disk(vm_name, front_dev, debug=True)
return status_target, output_target, status_source, output_source
except (error.CmdError, IOError):
return 1, "", 1, ""
def check_disk_info():
"""
Ckeck virsh domblkinfo output.
"""
if driver == "qemu" and output_source.strip() != output_target.strip():
raise error.TestFail("Command domblkinfo target/source"
" got different information!")
if output_source != "":
lines = output_source.splitlines()
capacity_cols = lines[0].split(":")
size = int(capacity_cols[1].strip())
if disk_size != size and disk_size_check:
raise error.TestFail("Command domblkinfo output is wrong! "
"'%d' != '%d'" % (disk_size, size))
else:
raise error.TestFail("Command domblkinfo has no output!")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Get all parameters from configuration.
vm_ref = params.get("domblkinfo_vm_ref")
device = params.get("domblkinfo_device", "yes")
front_dev = params.get("domblkinfo_front_dev", "vdd")
extra = params.get("domblkinfo_extra", "")
status_error = params.get("status_error", "no")
test_attach_disk = os.path.join(test.virtdir, "tmp.img")
domid = vm.get_id()
domuuid = vm.get_uuid()
driver = virsh.driver()
blklist = vm_xml.VMXML.get_disk_blk(vm_name)
sourcelist = vm_xml.VMXML.get_disk_source(vm_name)
test_disk_target = blklist[0]
test_disk_source = sourcelist[0].find('source').get('file')
test_disk_format = sourcelist[0].find('driver').get('type')
disk_size_check = False
if test_disk_format == "raw":
disk_size_check = True
if device == "no":
test_disk_target = ""
test_disk_source = ""
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
elif vm_ref == "uuid":
vm_ref = domuuid
if vm_ref == "test_attach_disk":
test_disk_source = test_attach_disk
disk_size_check = True
(status_target, output_target,
status_source, output_source) = attach_disk_test()
else:
result_source = virsh.domblkinfo(vm_ref, test_disk_source,
ignore_status=True, debug=True)
status_source = result_source.exit_status
output_source = result_source.stdout.strip()
if driver == "qemu":
result_target = virsh.domblkinfo(vm_ref, test_disk_target,
ignore_status=True, debug=True)
status_target = result_target.exit_status
output_target = result_target.stdout.strip()
else:
status_target = 0
output_target = "xen doesn't support domblkinfo target!"
disk_size = 0
if os.path.exists(test_disk_source):
disk_size = os.path.getsize(test_disk_source)
# Recover enviremont
if os.path.exists(test_attach_disk):
os.remove(test_attach_disk)
# Check status_error
if status_error == "yes":
if status_target == 0 or status_source == 0:
raise error.TestFail("Run successfully with wrong command!")
elif status_error == "no":
if status_target != 0 or status_source != 0:
raise error.TestFail("Run failed with right command")
# Check source information.
check_disk_info()
else:
raise error.TestFail("The status_error must be 'yes' or 'no'!")
def run(test, params, env):
"""
Test command: virsh domblklist.
1.Prepare test environment.
2.Run domblklist and check
3.Do attach disk and rerun domblklist with check
4.Clean test environment.
"""
def domblklist_test():
"""
Run domblklist and check result, raise error if check fail.
"""
disk_info_list = []
output_disk_info = {}
output_disk_info_list = []
result = virsh.domblklist(vm_ref, options,
ignore_status=True, debug=True)
status = result.exit_status
output = result.stdout.strip()
# Check status_error
if status_error == "yes":
if status == 0:
test.fail("Run successfully with wrong command!")
elif status_error == "no":
if status == 1:
test.fail("Run failed with right command")
# Check disk information.
disk_info = get_disk_info(vm_name, options)
logging.debug("The disk info dict from xml is: %s" % disk_info)
output_list = output.split('\n')
for i in range(2, len(output_list)):
output_disk_info[i - 2] = output_list[i].split()
logging.debug("The disk info dict from command output is: %s"
% output_disk_info)
for (k, v) in list(iteritems(output_disk_info)):
output_disk_info_list.append(v)
if "--details" in options:
for (k, v) in list(iteritems(disk_info)):
disk_info_list.append(v)
else:
for (k, v) in list(iteritems(disk_info)):
disk_info_list.append(v[2:])
disk_info_list.sort()
logging.debug("The disk info list from xml is: %s" % disk_info_list)
output_disk_info_list.sort()
logging.debug("The disk info list from command output is: %s"
% output_disk_info_list)
if disk_info_list != output_disk_info_list:
test.fail("The output did not match with disk"
" info from xml")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Get all parameters from configuration.
vm_ref = params.get("domblklist_vm_ref")
options = params.get("domblklist_options", "")
info_options = params.get("info_options", "")
status_error = params.get("status_error", "no")
front_dev = params.get("domblkinfo_front_dev", "vdd")
test_attach_disk = os.path.join(test.virtdir, "tmp.img")
domblkinfo = params.get("domblkinfo", "no")
extra = ""
domid = vm.get_id()
domuuid = vm.get_uuid()
vm_state = vm.state()
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = vm_name
elif vm_ref == "uuid":
vm_ref = domuuid
# run domblklist and check
domblklist_test()
# Test domblkinfo function as well
if domblkinfo == "yes":
ret = virsh.domblklist(vm_ref, options,
ignore_status=True, debug=True)
target_disks = re.findall(r"[v,s]d[a-z]", ret.stdout)
if info_options == "":
check_list = ["Capacity", "Allocation", "Physical"]
ret2 = virsh.domblkinfo(vm_ref, target_disks[0])
elif info_options == "--human":
check_list = ["Capacity", "Allocation", "Physical", "GiB"]
cmd = "virsh domblkinfo %s %s %s" % (vm_ref, target_disks[0], info_options)
ret2 = process.run(cmd, shell=True, ignore_status=True)
for check in check_list:
if not re.search(check, results_stdout_52lts(ret2)):
test.fail("Cmd domblkinfo run failed")
if status_error == "no":
try:
# attach disk and check
with open(test_attach_disk, 'wb') as source_file:
source_file.seek((512 * 1024 * 1024) - 1)
source_file.write(str(0).encode())
# since bug 1049529, --config will work with detach when
# domain is running, so change it back using --config here
if "--inactive" in options or vm_state == "shut off":
extra = "--config"
virsh.attach_disk(vm_name, test_attach_disk, front_dev, extra,
debug=True)
domblklist_test()
finally:
virsh.detach_disk(vm_name, front_dev, extra, debug=True)
if os.path.exists(test_attach_disk):
os.remove(test_attach_disk)
