コード例 #1
0
    def on_forward_button_clicked(self, widget):
        dport = self._get_selected_opt_from_combobox('data')
        cport = self._get_selected_opt_from_combobox('control')
        speed = int(self._get_selected_opt_from_combobox('speed'))

        if cport == _("No control port"):
            cport = None

        software = self.view['software_checkbutton'].get_active()
        hardware = self.view['hardware_checkbutton'].get_active()

        title = _('Connecting to device...')
        apb = dialogs.ActivityProgressBar(title, self, True)

        def get_remote_plugin_eb(failure):
            failure.trap(SerialException)
            apb.close()

            port = cport and cport or dport
            message = _('Exception received connecting to %s') % port
            details = _("""
The following error was received while trying to establish a connection:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)

        from vmc.common.hardware import HardwareRegistry
        hw = HardwareRegistry()

        d = hw.get_plugin_for_remote_dev(speed, dport, cport)
        d.addCallback(self._im_done, apb)
        d.addErrback(get_remote_plugin_eb)
コード例 #2
0
def open_import_csv_dialog(path=None):
    """Opens a filechooser dialog to import a csv file"""
    title = _("Import contacts from...")
    chooser_dialog = gtk.FileChooserDialog(
        title,
        buttons=(gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL, gtk.STOCK_OPEN,
                 gtk.RESPONSE_OK))

    chooser_dialog.set_default_response(gtk.RESPONSE_OK)

    filter_ = gtk.FileFilter()
    filter_.set_name(_("Csv files"))
    filter_.add_mime_type("text/xml")
    filter_.add_pattern("*csv")
    chooser_dialog.add_filter(filter_)
    filter_ = gtk.FileFilter()
    filter_.set_name(_("All files"))
    filter_.add_pattern("*")
    chooser_dialog.add_filter(filter_)

    if path:
        chooser_dialog.set_filename(os.path.abspath(path))
    if chooser_dialog.run() == gtk.RESPONSE_OK:
        resp = chooser_dialog.get_filename()
    else:
        resp = None

    chooser_dialog.destroy()
    return resp
コード例 #3
0
        def get_selected_device_eb(failure):
            failure.trap(SerialException)
            message = _('Device setup not completed')
            details = _("""
An unknown error occur when setting up the device:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
コード例 #4
0
def get_about_dialog():
    """Returns an AboutDialog with all the necessary info"""
    
    _MAX_WIDTH = 20
    wrapped_name = fill(consts.APP_LONG_NAME, _MAX_WIDTH)
    
    abt = gtk.AboutDialog()
    
    # attach an icon
    icon = abt.render_icon(gtk.STOCK_ABOUT, gtk.ICON_SIZE_MENU)
    abt.set_icon(icon)
    
    filepath = os.path.join(consts.IMAGES_DIR, 'VF_logo.png')
    logo = gtk.gdk.pixbuf_new_from_file(filepath)
    
    
    abt.set_logo(logo)
    gtk.about_dialog_set_url_hook(lambda abt, url: url_show(url))
    gtk.about_dialog_set_email_hook(lambda d, e: url_show("mailto:%s" % e))
    
    if gtk.pygtk_version >= (2, 11, 0):
        abt.set_program_name(wrapped_name)
    else:
        abt.set_name(wrapped_name)
    
    abt.set_version(consts.APP_VERSION)
    abt.set_copyright(_('Vodafone Spain S.A.'))
    abt.set_authors(consts.APP_AUTHORS)
    abt.set_documenters(consts.APP_DOCUMENTERS)
    abt.set_artists(consts.APP_ARTISTS)
    abt.set_website(consts.APP_URL)
    
    # XXX: pango here? I tried w/o success
    abt.set_website_label('http://forge.vodafonebetavine.net/..')
    
    trans_credits = _('translated to $LANG by $translater')
    # only enable them when necessary
    if trans_credits != 'translated to $LANG by $translater':
        abt.set_translator_credits(trans_credits)
    
    _license = """
Vodafone Mobile Connect Card driver for Linux
Copyright (C) 2006-2007 Vodafone España S.A.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA"""
    abt.set_license(_license)
    
    return abt
コード例 #5
0
 def get_imsi_cb(imsi):
     # we will setup the combobox options here
     items = []
     
     network = net_manager.get_network_by_id(imsi[:5])
     if not network:
         # we dont know anything about this network operator, we will
         # just show 'Unknown' in the combobox, giving no options to
         # the user
         items.append(SMSCItem(_("Unknown")))
     else:
         if network.smsc:
             # we know the network and we have its SMSC
             if smsc != network.smsc:
                 # as the SMSC is different that the stored one,
                 # we are gonna append "Custom" too
                 items.append(SMSCItem(_("Custom")))
                 items.append(SMSCItem(network.get_full_name(),
                                   network.smsc, active=False))
             else:
                 items.append(SMSCItem(network.get_full_name(),
                                   network.smsc))
         else:
             # we dont know the SMSC of this network
             items.append(SMSCItem(_("Unknown")))
     
     self.view.populate_smsc_combobox(items)
コード例 #6
0
def get_uptime_string(uptime):
    """Returns a uptime(1)'s like output from a uptime expressed in seconds"""
    time_dict = get_time_dict(uptime)
    try:
        hour = "%d" % time_dict['hour']
    except KeyError:
        hour = "0"

    try:
        minute = "%d" % time_dict['minute']
        if time_dict['minute'] < 10:
            minute = '0' + minute
    except KeyError:
        minute = '00'

    msg = "%s:%s" % (hour, minute)
    try:
        day = time_dict['day']
        if day > 1:
            resp = _("%(day)d days, %(msg)s") % {'day': day, 'msg': msg}
        else:
            resp = _("%(day)d day, %(msg)s") % {'day': day, 'msg': msg}

    except KeyError:
        resp = msg

    return resp
コード例 #7
0
def get_uptime_string(uptime):
    """Returns a uptime(1)'s like output from a uptime expressed in seconds"""
    time_dict = get_time_dict(uptime)
    try:
        hour = "%d" % time_dict['hour']
    except KeyError:
        hour = "0"
    
    try:
        minute = "%d" % time_dict['minute']
        if time_dict['minute'] < 10:
            minute = '0' + minute
    except KeyError:
        minute = '00'
    
    msg = "%s:%s" % (hour, minute)
    try:
        day = time_dict['day']
        if day > 1:
            resp = _("%(day)d days, %(msg)s") % {'day': day, 'msg' : msg}
        else:
            resp = _("%(day)d day, %(msg)s") % {'day': day, 'msg' : msg}
        
    except KeyError:
        resp = msg
    
    return resp
コード例 #8
0
        def get_imsi_cb(imsi):
            # we will setup the combobox options here
            items = []

            network = net_manager.get_network_by_id(imsi)
            if not network:
                # we dont know anything about this network operator, we will
                # just show 'Unknown' in the combobox, giving no options to
                # the user
                items.append(SMSCItem(_("Unknown")))
            else:
                if network.smsc:
                    # we know the network and we have its SMSC
                    if smsc != network.smsc:
                        # as the SMSC is different that the stored one,
                        # we are gonna append "Custom" too
                        items.append(SMSCItem(_("Custom")))
                        items.append(
                            SMSCItem(network.get_full_name(),
                                     network.smsc,
                                     active=False))
                    else:
                        items.append(
                            SMSCItem(network.get_full_name(), network.smsc))
                else:
                    # we dont know the SMSC of this network
                    items.append(SMSCItem(_("Unknown")))

            self.view.populate_smsc_combobox(items)
コード例 #9
0
        def get_selected_device_eb(failure):
            failure.trap(SerialException)
            message = _('Device setup not completed')
            details = _("""
An unknown error occur when setting up the device:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
コード例 #10
0
    def show_icon_cb(self, checkbutton):
        if checkbutton.get_active():
            if not tray_available():
                # block the handler so the set_active method doesnt
                # executes this callback again
                checkbutton.handler_block(self._hid2)
                checkbutton.set_active(False)
                # restore handler
                checkbutton.handler_unblock(self._hid2)
                message = _("Missing dependency")
                details = _("""
To use this feature you need either pygtk >= 2.10 or the egg.trayicon module
""")
                dialogs.open_warning_dialog(message, details)
                return True
            else:
                # attach and show systray icon
                self.parent_ctrl._setup_trayicon(ignoreconf=True)
                # if there's an available tray, enable this chkbtn
                close_win_chkbtn = self.view['close_window_checkbutton']
                close_win_chkbtn.set_sensitive(True)

        else:
            # detach icon from systray
            self.parent_ctrl._detach_trayicon()
            # close_window_checkbutton depends on this checkbutton
            # being active, thats why we set insensitive the chkbtn
            self.view['close_window_checkbutton'].set_sensitive(False)
            self.view['close_window_checkbutton'].set_active(False)
コード例 #11
0
    def on_forward_button_clicked(self, widget):
        dport = self._get_selected_opt_from_combobox('data')
        cport = self._get_selected_opt_from_combobox('control')
        speed = int(self._get_selected_opt_from_combobox('speed'))
        
        if cport == _("No control port"):
            cport = None
        
        software = self.view['software_checkbutton'].get_active()
        hardware = self.view['hardware_checkbutton'].get_active()
        
        title = _('Connecting to device...')
        apb = dialogs.ActivityProgressBar(title, self, True)
        
        def get_remote_plugin_eb(failure):
            failure.trap(SerialException)
            apb.close()
            
            port = cport and cport or dport
            message = _('Exception received connecting to %s') % port
            details = _("""
The following error was received while trying to establish a connection:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
        
        from vmc.common.hardware import HardwareRegistry
        hw = HardwareRegistry()
        
        d = hw.get_plugin_for_remote_dev(speed, dport, cport)
        d.addCallback(self._im_done, apb)
        d.addErrback(get_remote_plugin_eb)
コード例 #12
0
        def show_icon_cb(checkbutton):
            if checkbutton.get_active():
                if not tray_available():
                    # block the handler so the set_active method doesnt
                    # executes this callback again
                    checkbutton.handler_block(self._hid2)
                    checkbutton.set_active(False)
                    # restore handler
                    checkbutton.handler_unblock(self._hid2)
                    message = _("Missing dependency")
                    details = _("""
To use this feature you need either pygtk >= 2.10 or the egg.trayicon module
""")
                    dialogs.open_warning_dialog(message, details)
                    return True
                else:
                    # attach and show systray icon
                    self.parent_ctrl._setup_trayicon(ignoreconf=True)
                    # if there's an available tray, enable this chkbtn
                    close_win_chkbtn = self.view['close_window_checkbutton']
                    close_win_chkbtn.set_sensitive(True)
            
            else:
                # detach icon from systray
                self.parent_ctrl._detach_trayicon()
                # close_window_checkbutton depends on this checkbutton
                # being active, thats why we set insensitive the chkbtn
                self.view['close_window_checkbutton'].set_sensitive(False)
                self.view['close_window_checkbutton'].set_active(False)
コード例 #13
0
    def on_ok_button_clicked(self, widget):
        settings = self.get_profile_settings()
        
        if not settings:
            # preferred connection or auth not specified
            return
        
        if settings['staticdns']:
            if not self.dns1_entry.isvalid() or not self.dns2_entry.isvalid():
                # DNS must be valid
                return
        
        if not settings['profile_name'] or settings['profile_name'] == '':
            self.view['profile_name_entry'].grab_focus()
            return
        
        if self.is_profile_name_insane():
            message = _('Invalid characters in profile name')
            details = _("""
The following characters are not allowed in a profile name:
%s""") % ' '.join(INVALID_CHARS)
            dialogs.open_warning_dialog(message, details)
            return
        
        prof_manager = get_profile_manager(self.model.get_device())
        prof_manager.edit_profile(self.profile, settings)
        
        # now hide
        self.hide_ourselves()
コード例 #14
0
def open_import_csv_dialog(path=None):
    """Opens a filechooser dialog to import a csv file"""
    title = _("Import contacts from...")
    chooser_dialog = gtk.FileChooserDialog(title,
                    buttons = (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL,
                               gtk.STOCK_OPEN, gtk.RESPONSE_OK))
    
    chooser_dialog.set_default_response(gtk.RESPONSE_OK)
    
    filter_ = gtk.FileFilter()
    filter_.set_name(_("Csv files"))
    filter_.add_mime_type("text/xml")
    filter_.add_pattern("*csv")
    chooser_dialog.add_filter(filter_)
    filter_ = gtk.FileFilter()
    filter_.set_name(_("All files"))
    filter_.add_pattern("*")
    chooser_dialog.add_filter(filter_)
    
    if path:
        chooser_dialog.set_filename(os.path.abspath(path))
    if chooser_dialog.run() == gtk.RESPONSE_OK:
        resp = chooser_dialog.get_filename()
    else:
        resp = None

    chooser_dialog.destroy()
    return resp
コード例 #15
0
    def settings_valid(self,settings):
        class Problem(Exception):
            def __init__(self,detail):
                self.detail = detail
            def __str__(self):
                return repr(self.detail)

        try:
            if not settings:
                raise Problem("Profile settings are Null")

            if settings['staticdns']:
                if self.dns1_entry.get_text() == '' and self.dns2_entry.get_text() == '':
                    raise Problem("If static DNS is enabled, you must define at least one address")

                if not self.dns1_entry.isvalid() and not self.dns1_entry.get_text() == '':
                    raise Problem("Primary DNS address is invalid")

                if not self.dns2_entry.isvalid() and not self.dns2_entry.get_text() == '':
                    raise Problem("Secondary DNS address is invalid")

            if settings['apn'] == '':
                raise Problem("You must specify an APN")

            if not settings['profile_name'] or settings['profile_name'] == '':
                self.view['profile_name_entry'].grab_focus()
                raise Problem("profile name is invalid")
        
            if self.is_profile_name_insane():
                raise Problem(_("""The following characters are not allowed in a profile name: %s""") % ' '.join(INVALID_CHARS))

        except Problem, (instance): 
                message = _('Invalid value in profile')
                dialogs.open_warning_dialog(message, instance.detail)
                return False
コード例 #16
0
def save_standard_file(path=None):
    """Opens a filechooser dialog to choose where to save a file"""
    title = _("Save as ...")
    chooser_dialog = gtk.FileChooserDialog(
        title,
        action=gtk.FILE_CHOOSER_ACTION_SAVE,
        buttons=(gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL, gtk.STOCK_SAVE,
                 gtk.RESPONSE_OK))

    chooser_dialog.set_default_response(gtk.RESPONSE_OK)

    filter_ = gtk.FileFilter()
    filter_.set_name(_("All files"))
    filter_.add_pattern("*")
    chooser_dialog.add_filter(filter_)

    if path:
        chooser_dialog.set_filename(path)
    if chooser_dialog.run() == gtk.RESPONSE_OK:
        resp = chooser_dialog.get_filename()
        if os.path.isfile(resp):
            # requests to confirm overwrite:
            overwrite = open_confirm_action_dialog(
                _("Overwrite"),
                _('Overwrite "%s"?') % os.path.basename(resp),
                _("""A file with this name already exists.
If you choose to overwrite this file, the contents will be lost."""))
            if not overwrite:
                resp = None
    else:
        resp = None

    chooser_dialog.destroy()
    return resp
コード例 #17
0
    def on_ok_button_clicked(self, widget):
        settings = self.get_profile_settings()

        if not settings:
            # preferred connection or auth not specified
            return

        if settings['staticdns']:
            if not self.dns1_entry.isvalid() or not self.dns2_entry.isvalid():
                # DNS must be valid
                return

        if not settings['profile_name'] or settings['profile_name'] == '':
            self.view['profile_name_entry'].grab_focus()
            return

        if self.is_profile_name_insane():
            message = _('Invalid characters in profile name')
            details = _("""
The following characters are not allowed in a profile name:
%s""") % ' '.join(INVALID_CHARS)
            dialogs.open_warning_dialog(message, details)
            return

        prof_manager = get_profile_manager(self.model.get_device())
        prof_manager.edit_profile(self.profile, settings)

        # now hide
        self.hide_ourselves()
コード例 #18
0
def save_standard_file(path=None):
    """Opens a filechooser dialog to choose where to save a file"""
    title = _("Save as ...")
    chooser_dialog = gtk.FileChooserDialog(title,
                    action=gtk.FILE_CHOOSER_ACTION_SAVE,
                    buttons = (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL,
                               gtk.STOCK_SAVE, gtk.RESPONSE_OK))

    chooser_dialog.set_default_response(gtk.RESPONSE_OK)

    filter_ = gtk.FileFilter()
    filter_.set_name(_("All files"))
    filter_.add_pattern("*")
    chooser_dialog.add_filter(filter_)

    if path:
        chooser_dialog.set_filename(path)
    if chooser_dialog.run() == gtk.RESPONSE_OK:
        resp = chooser_dialog.get_filename()
        if os.path.isfile(resp):
            # requests to confirm overwrite:
            overwrite = open_confirm_action_dialog(_("Overwrite"),
                          _('Overwrite "%s"?') % os.path.basename(resp),
                          _("""A file with this name already exists.
If you choose to overwrite this file, the contents will be lost."""))
            if not overwrite:
                resp = None
    else:
        resp = None

    chooser_dialog.destroy()
    return resp
コード例 #19
0
def get_about_dialog():
    """Returns an AboutDialog with all the necessary info"""

    _MAX_WIDTH = 20
    wrapped_name = fill(consts.APP_LONG_NAME, _MAX_WIDTH)

    abt = gtk.AboutDialog()

    # attach an icon
    icon = abt.render_icon(gtk.STOCK_ABOUT, gtk.ICON_SIZE_MENU)
    abt.set_icon(icon)

    filepath = os.path.join(consts.IMAGES_DIR, 'VF_logo.png')
    logo = gtk.gdk.pixbuf_new_from_file(filepath)

    abt.set_logo(logo)
    gtk.about_dialog_set_url_hook(lambda abt, url: url_show(url))
    gtk.about_dialog_set_email_hook(lambda d, e: url_show("mailto:%s" % e))

    if gtk.pygtk_version >= (2, 11, 0):
        abt.set_program_name(wrapped_name)
    else:
        abt.set_name(wrapped_name)

    abt.set_version(consts.APP_VERSION)
    abt.set_copyright(_('Vodafone Spain S.A.'))
    abt.set_authors(consts.APP_AUTHORS)
    abt.set_documenters(consts.APP_DOCUMENTERS)
    abt.set_artists(consts.APP_ARTISTS)
    abt.set_website(consts.APP_URL)

    # XXX: pango here? I tried w/o success
    abt.set_website_label('http://forge.vodafonebetavine.net/..')

    trans_credits = _('translated to $LANG by $translater')
    # only enable them when necessary
    if trans_credits != 'translated to $LANG by $translater':
        abt.set_translator_credits(trans_credits)

    _license = """
Vodafone Mobile Connect Card driver for Linux
Copyright (C) 2006-2007 Vodafone España S.A.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA"""
    abt.set_license(_license)

    return abt
コード例 #20
0
 def set_no_device_present(self):
     for widget in WIDGETS_TO_HIDE:
         self[widget].set_sensitive(False)
     
     self.set_name(consts.APP_LONG_NAME + ' / ' + _('No device present'))
     
     self['cell_type_label'].set_text(_('N/A'))
     self['network_name_label'].set_text(_('N/A'))
コード例 #21
0
 def set_no_device_present(self):
     for widget in WIDGETS_TO_HIDE:
         self[widget].set_sensitive(False)
     
     self.set_name(consts.APP_LONG_NAME + ' / ' + _('No device present'))
     
     self['cell_type_label'].set_text(_('N/A'))
     self['network_name_label'].set_text(_('N/A'))
コード例 #22
0
        def get_remote_plugin_eb(failure):
            failure.trap(SerialException)
            apb.close()
            
            port = cport and cport or dport
            message = _('Exception received connecting to %s') % port
            details = _("""
The following error was received while trying to establish a connection:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
コード例 #23
0
        def device_serial_eb(failure):
            from PyQt4.QtGui import QMessageBox
            failure.trap(SerialException)
            message = _('Device setup not completed')
            details = _("""
Your device has been detected but it has been impossible to connect to it.

%s""") % failure.getErrorMessage()
            QMessageBox.warning(None, message, details)  
            _device_select([], self.configure_hardware, self.splash)
コード例 #24
0
        def get_remote_plugin_eb(failure):
            failure.trap(SerialException)
            apb.close()

            port = cport and cport or dport
            message = _('Exception received connecting to %s') % port
            details = _("""
The following error was received while trying to establish a connection:
%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
コード例 #25
0
        def device_serial_eb(failure):
            from vmc.gtk import dialogs
            failure.trap(SerialException)
            message = _('Device setup not completed')
            details = _("""
Your device has been detected but it has been impossible to connect to it.

%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
            _device_select([], self.configure_hardware, self.splash)
コード例 #26
0
        def get_profile_cb(profile):
            if profile:
                message = _('Configuration details found for Operator!')
                details = _(
"""Do you want to load stored settings for %s?""") % profile.get_full_name()
                resp = dialogs.open_confirm_action_dialog(_('Load'),
                                                          message, details)
                if resp:
                    self.load_network_profile(profile)
                    self.propose_profile_name()
コード例 #27
0
        def device_serial_eb(failure):
            from vmc.gtk import dialogs
            failure.trap(SerialException)
            message = _('Device setup not completed')
            details = _("""
Your device has been detected but it has been impossible to connect to it.

%s""") % failure.getErrorMessage()
            dialogs.open_warning_dialog(message, details)
            _device_select([], self.configure_hardware, self.splash)
コード例 #28
0
 def get_profile_cb(profile):
     if profile:
         message = _('Configuration details found for Operator!')
         details = _("""Do you want to load stored settings for %s?"""
                     ) % profile.get_full_name()
         resp = dialogs.open_confirm_action_dialog(
             _('Load'), message, details)
         if resp:
             self.load_network_profile(profile)
             self.propose_profile_name()
コード例 #29
0
        def device_timeout_eb(failure):
            failure.trap(ex.ATTimeout)
            from vmc.gtk import dialogs
            from vmc.common.shutdown import shutdown_core

            message = _('Device not responding')
            details = _("""
Your device took more than 15 seconds to reply to my last command. Unplug it,
plug it again, and try in a moment.""")
            dialogs.open_warning_dialog(message, details)
            shutdown_core(delay=.2)
コード例 #30
0
        def get_sms_list_cb(messages):
            if not messages:
                return

            message_text = self.get_message_text()
            if not message_text:
                resp = dialogs.open_warning_request_cancel_ok(
                    _("Send empty message"),
                    _("Are you sure you want to send an empty message?"))
                if not resp:  # user said no
                    self.view.set_idle_view()
                    return

            # send the sms
            sms_cb_list = []
            sent_list = []
            err_list = []

            def list_cb(resp):
                if self.sms:
                    self.delete_messages_from_db_and_tv([self.sms])

                if sent_list:
                    self.save_messages_to_db(sent_list,
                                             TV_DICT_REV['sent_treeview'])
                if err_list:
                    dialogs.open_warning_dialog(
                        _("Unknown Error"),
                        _("Your message cannot be sent to some of its recipients. Unsent messages have been saved in drafts. Please, check that you have typed the number correctly."
                          ))
                    self.save_messages_to_db(err_list,
                                             TV_DICT_REV['drafts_treeview'])
                self.model.unregister_observer(self)
                self.view.hide()

            def try_to_send(sms):
                def ok(ign):
                    sent_list.append(sms)

                def error(failure):
                    failure.trap(ex.CMSError500, ex.CMSError304)
                    err_list.append(sms)

                d = self.parent_ctrl.model.send_sms(sms)
                d.addCallback(ok)
                d.addErrback(error)
                return d

            for sms in messages:
                d = try_to_send(sms)
                sms_cb_list.append(d)

            dlist = DeferredList(sms_cb_list)
            dlist.addCallback(list_cb)
コード例 #31
0
        def device_timeout_eb(failure):
            failure.trap(ex.ATTimeout)
            from vmc.gtk import dialogs
            from vmc.common.shutdown import shutdown_core

            message = _('Device not responding')
            details = _("""
Your device took more than 15 seconds to reply to my last command. Unplug it,
plug it again, and try in a moment.""")
            dialogs.open_warning_dialog(message, details)
            shutdown_core(delay=.2)
コード例 #32
0
        def device_timeout_eb(failure):
            failure.trap(ex.ATTimeout)
            from PyQt4.QtGui import QMessageBox
            from vmc.common.shutdown import shutdown_core
            
            message = _('Device not responding')
            details = _("""
Your device took more than 15 seconds to reply to my last command. Unplug it,
plug it again, and try in a moment.""")
            QMessageBox.warning(None, message, details)  
            shutdown_core(delay=.2)
コード例 #33
0
        def identify_dev_eb(failure):
            failure.trap(SerialException)
            
            from PyQt4.QtGui import QMessageBox
            info = dict(name=device.name, vmc=APP_LONG_NAME)
            message = _('Device setup not completed')
            details = _("""
%(vmc)s cannot connect with the selected device (%(name)s).
""") % info
            QMessageBox.warning(None, message, details)  
            config.set_last_device('')
            self.detect_hardware()
コード例 #34
0
        def identify_dev_eb(failure):
            failure.trap(SerialException)

            from vmc.gtk import dialogs
            info = dict(name=device.name, vmc=APP_LONG_NAME)
            message = _('Device setup not completed')
            details = _("""
%(vmc)s cannot connect with the selected device (%(name)s).
""") % info
            dialogs.open_warning_dialog(message, details)
            config.set_last_device('')
            self.detect_hardware()
コード例 #35
0
    def set_disconnected(self):
        image = gtk.Image()
        image.set_from_file(os.path.join(consts.IMAGES_DIR, 'connect.png'))
        image.show()
        self['connect_button'].set_icon_widget(image)
        self['connect_button'].set_label(_("Connect"))
        self['connect_button'].set_active(False)

        self['upload_alignment'].hide()
        self['download_alignment'].hide()

        self['net_statusbar'].push(1, _('Not connected'))
コード例 #36
0
        def identify_dev_eb(failure):
            failure.trap(SerialException)
            
            from vmc.gtk import dialogs
            info = dict(name=device.name, vmc=APP_LONG_NAME)
            message = _('Device setup not completed')
            details = _("""
%(vmc)s cannot connect with the selected device (%(name)s).
""") % info
            dialogs.open_warning_dialog(message, details)
            config.set_last_device('')
            self.detect_hardware()
コード例 #37
0
    def on_pin_modify_ok_button_clicked(self, widget):
        oldpin = self.view['pin_modify_current_pin_entry'].get_text()
        newpin = self.view['pin_modify_new_pin_entry'].get_text()
        newpin2 = self.view['pin_modify_confirm_pin_entry'].get_text()
        if newpin == newpin2:
            def callback(resp):
                self.hide_widgets()
                self.model.unregister_observer(self)
                self.view.hide()
            
            def bad_passwd_eb(failure):
                failure.trap(ex.CMEErrorIncorrectPassword, ex.ATError)
                title = _("Incorrect PIN")
                details = _("""
<small>The PIN you've just entered is
incorrect. Bear in mind that after
three failed PINs you'll be asked
for the PUK code</small>
""")
                
                notification = show_error_notification(
                            self.view['pin_modify_current_pin_entry'],
                            title, details)
                self.append_widget(notification)
                self.view['pin_modify_current_pin_entry'].grab_focus()
                self.view['pin_modify_current_pin_entry'].select_region(0, -1)
            
            def garbage_passwd_eb(failure):
                failure.trap(ex.InputValueError)
                title = _("Invalid PIN")
                details = _("""
<small>The PIN you've just entered is
invalid. The PIN must be a 4 digit code</small>
""")
                
                notification = show_error_notification(
                            self.view['pin_modify_new_pin_entry'],
                            title, details)
                self.append_widget(notification)
                self.view['pin_modify_new_pin_entry'].select_region(0, -1)
                self.view['pin_modify_confirm_pin_entry'].select_region(0, -1)
                self.view['pin_modify_new_pin_entry'].grab_focus()
                
            d = self.model.change_pin(oldpin, newpin)
            d.addCallback(callback)
            d.addErrback(bad_passwd_eb)
            d.addErrback(garbage_passwd_eb)
        else:
            dialogs.open_warning_dialog(_("Error"),
                                        _("Passwords don't match"))
            self.view['pin_modify_new_pin_entry'].select_region(0, -1)
            self.view['pin_modify_confirm_pin_entry'].select_region(0, -1)
            self.view['pin_modify_new_pin_entry'].grab_focus()
コード例 #38
0
ファイル: pin.py プロジェクト: Croosi/vodafone-mobile-connect
        def pin_req_eb(failure):
            failure.trap(ex.CMEErrorIncorrectPassword, ex.ATError)
            title = _("Incorrect PIN")
            details = _("""
<small>The PIN you've just entered is
incorrect. Bear in mind that after
three failed PINs you'll be asked
for the PUK code</small>
""")
            dialogs.open_warning_dialog(title, details)
            self.view['pin_modify_current_pin_entry'].grab_focus()
            self.view['pin_modify_current_pin_entry'].select_region(0, -1)
コード例 #39
0
 def init_view_columns(self):
     render_text = gtk.CellRendererText()
     col0=gtk.TreeViewColumn(_('Name'))
     col0.pack_start(render_text, expand=True)
     col0.add_attribute(render_text, 'text', 0)
     col1=gtk.TreeViewColumn(_('Country'))
     col1.pack_start(render_text, expand=True)
     col1.add_attribute(render_text, 'text', 1)
     col2=gtk.TreeViewColumn(_('Type'))
     col2.pack_start(render_text, expand=True)
     col2.add_attribute(render_text, 'text', 2)
     self._view.append_column(col0)
     self._view.append_column(col1)
     self._view.append_column(col2)
コード例 #40
0
        def send_pin_incorrect_passwd_eb(failure):
            failure.trap(ex.CMEErrorIncorrectPassword, ex.ATError)
            title = _("Incorrect PIN")
            details = _("""
The PIN you've just entered is
incorrect. Bear in mind that after
three failed PINs you'll be asked
for the PUK code
""")
            notification = \
                show_error_notification(self.view['pin_entry'], title, details)
            self.append_widget(notification)
            self.view['pin_entry'].grab_focus()
            self.view['pin_entry'].select_region(0, -1)
コード例 #41
0
        def get_sms_list_cb(messages):
            if not messages:
                return
        
            message_text = self.get_message_text()
            if not message_text:
                resp = dialogs.open_warning_request_cancel_ok(
                        _("Send empty message"),
                        _("Are you sure you want to send an empty message?"))
                if not resp: # user said no
                    self.view.set_idle_view()
                    return
            
            # send the sms
            sms_cb_list = []            
            sent_list = []
            err_list = []
            def list_cb(resp):
                if self.sms:
                    self.delete_messages_from_db_and_tv([self.sms])

                if sent_list:
                    self.save_messages_to_db(sent_list, 
                                             TV_DICT_REV['sent_treeview'])
                if err_list:
                    dialogs.open_warning_dialog(
                        _("Unknown Error"),
                        _("Your message cannot be sent to some of its recipients. Unsent messages have been saved in drafts. Please, check that you have typed the number correctly."))
                    self.save_messages_to_db(err_list,
                                             TV_DICT_REV['drafts_treeview'])
                self.model.unregister_observer(self)
                self.view.hide()

            def try_to_send(sms):
                def ok(ign):
                    sent_list.append(sms)
                def error(failure):
                    failure.trap(ex.CMSError500, ex.CMSError304)
                    err_list.append(sms)
                d = self.parent_ctrl.model.send_sms(sms)
                d.addCallback(ok)
                d.addErrback(error)      
                return d         

            for sms in messages:
                d = try_to_send(sms)
                sms_cb_list.append(d)
            
            dlist = DeferredList(sms_cb_list)
            dlist.addCallback(list_cb)
コード例 #42
0
            def list_cb(resp):
                if self.sms:
                    self.delete_messages_from_db_and_tv([self.sms])

                if sent_list:
                    self.save_messages_to_db(sent_list, 
                                             TV_DICT_REV['sent_treeview'])
                if err_list:
                    dialogs.open_warning_dialog(
                        _("Unknown Error"),
                        _("Your message cannot be sent to some of its recipients. Unsent messages have been saved in drafts. Please, check that you have typed the number correctly."))
                    self.save_messages_to_db(err_list,
                                             TV_DICT_REV['drafts_treeview'])
                self.model.unregister_observer(self)
                self.view.hide()
コード例 #43
0
            def garbage_passwd_eb(failure):
                failure.trap(ex.InputValueError)
                title = _("Invalid PIN")
                details = _("""
<small>The PIN you've just entered is
invalid. The PIN must be a 4 digit code</small>
""")
                
                notification = show_error_notification(
                            self.view['pin_modify_new_pin_entry'],
                            title, details)
                self.append_widget(notification)
                self.view['pin_modify_new_pin_entry'].select_region(0, -1)
                self.view['pin_modify_confirm_pin_entry'].select_region(0, -1)
                self.view['pin_modify_new_pin_entry'].grab_focus()
コード例 #44
0
            def list_cb(resp):
                if self.sms:
                    self.delete_messages_from_db_and_tv([self.sms])

                if sent_list:
                    self.save_messages_to_db(sent_list,
                                             TV_DICT_REV['sent_treeview'])
                if err_list:
                    dialogs.open_warning_dialog(
                        _("Unknown Error"),
                        _("Your message cannot be sent to some of its recipients. Unsent messages have been saved in drafts. Please, check that you have typed the number correctly."
                          ))
                    self.save_messages_to_db(err_list,
                                             TV_DICT_REV['drafts_treeview'])
                self.model.unregister_observer(self)
                self.view.hide()
コード例 #45
0
def shutdown_core(signal=None, frame=None, delay=2):
    from vmc.common.config import config
    config.close() # free VMCConfig singleton
    
    from vmc.common.phonebook import get_phonebook
    phonebook = get_phonebook(None)
    try:
        phonebook.close() # free Phonebook singleton
    except AttributeError:
        pass
    
    from vmc.common.messages import get_messages_obj
    messages = get_messages_obj(None)
    try:
        messages.close() # free Messages singleton
    except AttributeError:
        pass
    
    from vmc.common.persistent import net_manager
    try:
        net_manager.close()
    except AttributeError:
        pass
    
    log.msg(_('Shutting down...'))
    reactor.callLater(delay, reactor.stop)
コード例 #46
0
    def _get_usage_for_month(self, dateobj):
        key = (dateobj.year, dateobj.month)
        if not self.month_cache.has_key(key):
            # Current session information
            if self.is_connected() and self.origin_date.month == dateobj.month:
                tracker = self.connsm.tracker
                tracker.get_current_usage().addCallback(
                    self._update_session_stats)

                stats = self.session_stats
                umts = tracker.conn_mode in THREEG_SIGNALS
                transferred = stats[0] + stats[1]
                transferred_3g = umts and transferred or 0
                transferred_gprs = not umts and transferred or 0
            else:
                transferred_3g = 0
                transferred_gprs = 0

            # Historical usage data
            usage = usage_manager.get_usage_for_month(dateobj)
            for item in usage:
                if item.umts:
                    transferred_3g += item.bits_recv + item.bits_sent
                else:
                    transferred_gprs += item.bits_recv + item.bits_sent

            self.month_cache[key] = {
                'month': dateobj.strftime(_("%B, %Y")),
                'transferred_gprs': transferred_gprs,
                'transferred_3g': transferred_3g,
                'transferred_total': transferred_gprs + transferred_3g
            }
        return self.month_cache[key]
コード例 #47
0
        def send_puk_eb(failure):
            failure.trap(ex.CMEErrorIncorrectPassword)
            title = _("Incorrect PUK")
            details = _("""
<small>The PUK you've just entered is
incorrect. Bear in mind that after
three failed PUKs you'll be asked
for the PUK2 code. Your PIN code
should be your last PIN.</small>
""")
            n = show_error_notification(self.view['pin_entry'], title, details)
            self.append_widget(n)
            self.view['pin_entry'].grab_focus()
            self.view['pin_entry'].select_region(0, -1)
            self.view['puk_entry'].grab_focus()
            self.view['puk_entry'].select_region(0, -1)
コード例 #48
0
    def _get_usage_for_month(self, dateobj):
        key = (dateobj.year, dateobj.month)
        if not self.month_cache.has_key(key):
            # Current session information
            if self.is_connected() and self.origin_date.month == dateobj.month:
                tracker = self.connsm.tracker
                tracker.get_current_usage().addCallback(
                                                    self._update_session_stats)
               
                stats = self.session_stats
                umts = tracker.conn_mode in THREEG_SIGNALS
                transferred = stats[0] + stats[1]
                transferred_3g = umts and transferred or 0
                transferred_gprs = not umts and transferred or 0
            else:
                transferred_3g = 0
                transferred_gprs = 0

            # Historical usage data
            usage = usage_manager.get_usage_for_month(dateobj)
            for item in usage:
                if item.umts:
                    transferred_3g += item.bits_recv + item.bits_sent
                else:
                    transferred_gprs += item.bits_recv + item.bits_sent
            
            self.month_cache[key] = {
                'month': dateobj.strftime(_("%B, %Y")),
                'transferred_gprs': transferred_gprs,
                'transferred_3g': transferred_3g,
                'transferred_total': transferred_gprs + transferred_3g
            }
        return self.month_cache[key]
コード例 #49
0
def shutdown_core(signal=None, frame=None, delay=2):
    from vmc.common.config import config
    config.close()  # free VMCConfig singleton

    from vmc.common.phonebook import get_phonebook
    phonebook = get_phonebook(None)
    try:
        phonebook.close()  # free Phonebook singleton
    except AttributeError:
        pass

    from vmc.common.messages import get_messages_obj
    messages = get_messages_obj(None)
    try:
        messages.close()  # free Messages singleton
    except AttributeError:
        pass

    from vmc.common.persistent import net_manager
    try:
        net_manager.close()
    except AttributeError:
        pass

    log.msg(_('Shutting down...'))
    reactor.callLater(delay, reactor.stop)
コード例 #50
0
    def _fill_treeview_with_device(self, device):
        if not device:
            self.view['statusbar1'].push(1, _('Discovery finished!'))
            return

        model = self.view['device_treeview'].get_model()
        model.add_device(device)
        self.disc_queue.get().addCallback(self._fill_treeview_with_device)
コード例 #51
0
        def device_lacks_extractinfo_eb(failure):
            failure.trap(ex.DeviceLacksExtractInfo)
            from vmc.gtk import dialogs
            from vmc.common.shutdown import shutdown_core

            device = failure.value.args[0]
            info = dict(name=device.name, vmc=APP_LONG_NAME)
            message = _('Device setup not completed')
            details = _("""
Your device "%(name)s" is not properly registered with the kernel. %(vmc)s
needs at least two serial ports to communicate with your %(name)s.
The program includes a set of udev rules plus some binaries that make sure
that your device is always recognised properly. If you've installed from
source, then make sure to copy the relevant files in the contrib dir
""") % info
            dialogs.open_warning_dialog(message, details)

            shutdown_core(delay=.2)
コード例 #52
0
def get_device_treeview(device_list, callback, parent_view):
    window = gtk.Window()
    window.set_transient_for(parent_view.get_top_widget())
    window.set_position(gtk.WIN_POS_CENTER_ON_PARENT)
    window.set_title(_('Device List'))
    window.set_size_request(width=400, height=300)
    sw = gtk.ScrolledWindow()
    sw.add(DeviceList(device_list, callback, window))
    window.add(sw)
    window.show_all()