def CheckField(val, name):
index = val.find(name)
if index > -1:
val = val.replace(name, "")
val = vs.Str2Num(val)
if val <= 0:
val = 1
val = vs.Num2Str(2, val)
if index > -1:
val = val + name
return val
def SetupDialog():
for i in range(1,6):
vs.AddChoice(Constants.dialogId,kLeaf,vs.GetPluginString(4000+i),i-1)
vs.AddChoice(Constants.dialogId,kLedgeType,vs.GetPluginString(4006),0)
vs.AddChoice(Constants.dialogId,kLedgeType,vs.GetPluginString(4007),1)
vs.AddChoice(Constants.dialogId,kLedgeMaterial,vs.GetPluginString(4008),0)
vs.AddChoice(Constants.dialogId,kLedgeMaterial,vs.GetPluginString(4009),1)
vs.AddChoice(Constants.dialogId,kLedgeMaterial,vs.GetPluginString(4010),2)
fraction, display, format, upi, name, squareName = vs.GetUnits()
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'IDLabel')
vs.SetEditInteger(Constants.dialogId, kIDLabel, vs.Str2Num(value))
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'Width')
inches = 0
if(format == 2 or format == 3):
index = value.find("'")
if index > -1:
splitVal = value.split("'")
inches += vs.Str2Num(splitVal[0])*12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
value = vs.Str2Num(str)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name,"")
value = vs.Str2Num(value)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name, "")
inches = vs.Str2Num(value)
vs.SetEditReal(Constants.dialogId,kWidth,kEditRealDim,inches)
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'Height')
inches = 0
if(format == 2 or format == 3):
index = value.find("'")
if index > -1:
splitVal = value.split("'")
inches += vs.Str2Num(splitVal[0])*12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
value = vs.Str2Num(str)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name,"")
value = vs.Str2Num(value)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name, "")
inches = vs.Str2Num(value)
vs.SetEditReal(Constants.dialogId,kHeight,kEditRealDim,inches)
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'ElvInWall')
inches = 0
if(format == 2 or format == 3):
index = value.find("'")
if index > -1:
splitVal = value.split("'")
inches += vs.Str2Num(splitVal[0])*12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
value = vs.Str2Num(str)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name,"")
value = vs.Str2Num(value)
inches += value
else:
index = value.find(name)
if index > -1:
value = value.replace(name, "")
inches = vs.Str2Num(value)
vs.SetEditReal(Constants.dialogId,kElevationInWall,kEditRealDim,inches)
#######################################################
value = vs.GetRField(Constants.h, kPluginName, 'OpenTheWindow')
vs.SetBooleanItem(Constants.dialogId, kOpenTheWindow ,value =='True')
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'OpeningAngle')
newNumber = vs.Str2Num(value)
vs.SetEditReal(Constants.dialogId, kOpeningAngle, kEditRealAng,newNumber)
#######################################################
leafType = vs.GetRField(Constants.h,kPluginName,'Leaf')
if leafType == 'None':
vs.SelectChoice(Constants.dialogId, kLeaf, 0, True)
elif leafType == '1(no glass)':
vs.SelectChoice(Constants.dialogId, kLeaf, 1, True)
elif leafType == '1(glass)':
vs.SelectChoice(Constants.dialogId, kLeaf, 2, True)
elif leafType == '2(no glass)':
vs.SelectChoice(Constants.dialogId, kLeaf, 3, True)
else:
vs.SelectChoice(Constants.dialogId, kLeaf, 4, True)
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'HasCurts')
vs.SetBooleanItem(Constants.dialogId, kHasCurtains, value =='True')
#######################################################
ledgeType = vs.GetRField(Constants.h,kPluginName,'LedgeType')
if ledgeType == 'Attach to wall':
vs.SelectChoice(Constants.dialogId,kLedgeType,0,True)
else:
vs.SelectChoice(Constants.dialogId,kLedgeType,1,True)
#######################################################
ledgeMaterial = vs.GetRField(Constants.h,kPluginName,'LedgeMaterial')
if ledgeMaterial == 'Wood':
vs.SelectChoice(Constants.dialogId,kLedgeMaterial,0,True)
elif ledgeMaterial == 'Plastic':
vs.SelectChoice(Constants.dialogId,kLedgeMaterial,1,True)
else:
vs.SelectChoice(Constants.dialogId,kLedgeMaterial,2,True)
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'DrawTheCurts')
vs.SetBooleanItem(Constants.dialogId,kDrawTheCurts,value == 'True')
#######################################################
colorIndex = vs.GetRField(Constants.h, kPluginName, '__CustomColor')
vs.SetColorChoice(Constants.dialogId,kCurtsColor,vs.Str2Num(colorIndex))
#######################################################
value = vs.GetRField(Constants.h,kPluginName,'Pieces')
newNumber = vs.Str2Num(value)
vs.SetEditInteger(Constants.dialogId, kPieces, newNumber)
#######################################################
opacityText = vs.GetRField(Constants.h,kPluginName,'Opacity')
vs.SetControlData(Constants.dialogId,kOpacitySlider,vs.Str2Num(opacityText))
#######################################################
text = vs.GetPluginString(3054)
text += ' ('
text += opacityText
text +='%): '
vs.SetItemText(Constants.dialogId,kOpacityText,text)
#######################################################
hasCurtain = vs.GetBooleanItem(Constants.dialogId,kHasCurtains)
drawTheCurtain = vs.GetBooleanItem(Constants.dialogId,kDrawTheCurts)
index = vs.GetSelectedChoiceIndex(Constants.dialogId, kLeaf, 0)
hasLeaf = not(index == 0)
EnableItems(hasLeaf, vs.GetBooleanItem(Constants.dialogId,kOpenTheWindow), hasCurtain, drawTheCurtain)
vs.SetSliderLiveUpdate(Constants.dialogId, kOpacitySlider, True)
def Reset():
width = vs.PWidth
height = vs.PHeight
elevation = vs.PElvInWall
angle = vs.POpeningAngle
leafType = vs.GetRField(gObjHandle, gObjName, 'Leaf')
isOpened = vs.GetRField(gObjHandle, gObjName, 'OpenTheWindow')
wallType = vs.GetTypeN(gWallHandle)
if (wallType == 68 or wallType == 89):
thickness = vs.WallWidth(gWallHandle)
else:
upi = vs.GetPrefReal(152) / 25.4
thickness = 100 * upi
if isOpened == "False":
angle = 0
frameObj = frame.Frame(width, height, thickness, elevation, leafType,
angle)
frameObj.Draw()
#draw curtain#######################
if vs.PHasCurts:
objLedge = Ledge.LedgeObj(height / 20, height / 40, width,
height + elevation, vs.PLedgeMaterial,
vs.PLedgeType, thickness)
objLedge.DrawLedge()
hObject = vs.LNewObj()
if objLedge.getMaterial() == "Wood":
#if self.__fMaterial == LedgeMaterial.Wood:
vs.SetFillBack(hObject, Constants.kColorIndexWood)
elif objLedge.getMaterial() == "Metal":
#elif self.__fMaterial == LedgeMaterial.Metal:
vs.SetFillBack(hObject, Constants.kColorIndexMetal)
else:
vs.SetFillBack(hObject, Constants.kColorIndexPlastic)
curtainPieces = int(
vs.Str2Num(vs.GetRField(gObjHandle, gObjName, "Pieces")))
curtainStartZ = elevation + thickness / 2
curtainStartY = thickness / 2 - objLedge.getLedgeShaftWidth(
) * 1.5 + objLedge.getLedgeWidth()
curtainHeight = objLedge.getLedgeHeight(
) - objLedge.getLedgeShaftHeight()
curtainWidth = width * Ledge.kLedgeOutWindow
curtainCurvesWidth = 2
if curtainCurvesWidth > objLedge.getLedgeShaftWidth():
curtainCurvesWidth = objLedge.getLedgeShaftWidth()
curtainOpacity = int(
vs.Str2Num(vs.GetRField(gObjHandle, gObjName, 'Opacity')))
distanceBetweenCurtainPieces = 30
curtainCurveStep = 30
curtainColor = vs.Str2Num(
vs.GetRField(gObjHandle, gObjName, '__CustomColor'))
# distanceBetweenCurtainPieces, curtainCurveStep and curtainCurveWidth are not neccessary to add in the creation of the object
curtain = Curtain(Vector(0, -curtainStartY,
curtainStartZ), curtainWidth, curtainHeight,
curtainColor, curtainPieces, curtainOpacity,
distanceBetweenCurtainPieces, curtainCurveStep,
curtainCurvesWidth)
if vs.PDrawTheCurts:
curtain.DrawCurtain()
def CheckValues():
#We check the values each time the user enters new data in the OIP
global winWidth
fraction, display, format, upi, name, squareName = vs.GetUnits()
col = vs.GetRField(gObjHandle, gObjName, 'CurtsColor')
if col == 'White':
vs.SetRField(gObjHandle, gObjName, '__CustomColor', 256)
elif col == 'Black':
vs.SetRField(gObjHandle, gObjName, '__CustomColor', 257)
elif col == 'Custom Color' and vs.P__PrevCustomColor != 0:
vs.SetRField(gObjHandle, gObjName, '__CustomColor',
vs.P__PrevCustomColor)
####################################
val = vs.GetRField(gObjHandle, gObjName, 'IDLabel')
val = vs.Str2Num(val)
if val < 0:
val = 0
vs.SetRField(gObjHandle, gObjName, 'IDLabel', vs.Num2Str(0, val))
################################################
val = vs.GetRField(gObjHandle, gObjName, 'Width')
if (format == 2 or format == 3):
inches = 0
index = val.find("'")
if index > -1:
splitVal = val.split("'")
inches += vs.Str2Num(splitVal[0]) * 12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
val = vs.Str2Num(str)
inches += val
else:
index = val.find(name)
if index > -1:
val = val.replace(name, "")
val = vs.Str2Num(val)
inches += val
if inches < 0:
inches = 1
val = vs.Num2Str(2, inches)
val = val + name
else:
val = CheckField(val, name)
vs.SetRField(gObjHandle, gObjName, 'Width', val)
val = val.replace(name, "")
val = vs.Str2Num(val)
winWidth = val
################################################
val = vs.GetRField(gObjHandle, gObjName, 'Height')
if (format == 2 or format == 3):
inches = 0
index = val.find("'")
if index > -1:
splitVal = val.split("'")
inches += vs.Str2Num(splitVal[0]) * 12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
val = vs.Str2Num(str)
inches += val
else:
index = val.find(name)
if index > -1:
val = val.replace(name, "")
val = vs.Str2Num(val)
inches += val
if inches < 0:
inches = 1
val = vs.Num2Str(2, inches)
val = val + name
else:
val = CheckField(val, name)
vs.SetRField(gObjHandle, gObjName, 'Height', val)
################################################
val = vs.GetRField(gObjHandle, gObjName, 'ElvInWall')
if (format == 2 or format == 3):
inches = 0
index = val.find("'")
if index > -1:
splitVal = val.split("'")
inches += vs.Str2Num(splitVal[0]) * 12.0
str = splitVal[1]
index = str.find(name)
if index > -1:
str = str.replace(name, "")
val = vs.Str2Num(str)
inches += val
else:
index = val.find(name)
if index > -1:
val = val.replace(name, "")
val = vs.Str2Num(val)
inches += val
if inches < 0:
inches = 1
val = vs.Num2Str(2, inches)
val = val + name
else:
val = CheckField(val, name)
vs.SetRField(gObjHandle, gObjName, 'ElvInWall', val)
##########################################################
val = vs.GetRField(gObjHandle, gObjName, 'OpeningAngle')
val = vs.Str2Num(val)
if val < 0:
val = 0
elif val > 90:
val = 90
vs.SetRField(gObjHandle, gObjName, 'OpeningAngle', vs.Num2Str(2, val))
################################################
#In inches: maxPieces = winWidth(in inches) // (floor division) Max width of a pice
inchesPerUnit = 1 / upi
winWidth = inchesPerUnit * winWidth
maxPieces = winWidth // Constants.kMaxWidthOfPieceInInches
val = vs.GetRField(gObjHandle, gObjName, 'Pieces')
val = vs.Str2Num(val)
if val > maxPieces:
val = maxPieces
vs.SetRField(gObjHandle, gObjName, 'Pieces', vs.Num2Str(0, val))
##############################################################
val = vs.GetRField(gObjHandle, gObjName, 'Opacity')
val = vs.Str2Num(val)
if val > 100:
val = 100
elif val < 0:
val = 0
vs.SetRField(gObjHandle, gObjName, 'Opacity', vs.Num2Str(0, val))
width = vs.PWidth
height = vs.PHeight
upi = vs.GetPrefReal(152) / 25.4
wallType = vs.GetTypeN(gWallHandle)
if (wallType == 68 or wallType == 89):
thickness = vs.WallWidth(gWallHandle)
else:
thickness = 100 * upi
leafType = vs.GetRField(gObjHandle, gObjName, 'Leaf')
if (leafType == 'None'):
twoWings = False
elif (leafType == '1(no glass)'):
twoWings = False
elif (leafType == '1(glass)'):
twoWings = False
elif (leafType == '2(no glass)'):
twoWings = True
elif (leafType == '2(glass)'):
twoWings = True
if (width / 3 <= thickness and twoWings == True):
width = 3 * thickness + 10 * upi
vs.SetRField(gObjHandle, gObjName, 'Width', width)
if (thickness >= height / 2):
height = 2 * thickness + 10 * upi
vs.SetRField(gObjHandle, gObjName, 'Height', height)
if (thickness >= width / 2):
width = thickness * 2 + 10 * upi
vs.SetRField(gObjHandle, gObjName, 'Width', width)
def __to_int(value: str) -> int:
return int(vs.Str2Num(value))