def _apply_fixed_delay(cm, *args, **kwargs):
"""Internal method to implement `FixedDelay` `ChannelModel` wrapper."""
assert isinstance(cm, ChannelModel)
assert hasattr(cm, '__subclass__')
assert hasattr(cm, '__fixed_delay__')
subclass = cm.__subclass__
delay = cm.__fixed_delay__
r = subclass.apply(cm, *args, **kwargs)
if ANNO.supports(r, 'cm-delay'):
r.delanno('cm-delay')
if ANNO.supported(r) and (delay>0):
r.setanno('cm-delay', delay)
return r
def strcollision(p):
"""Get string representation of 'cif-collision' list from packet `p`."""
coll = None
if ANNO.supports(p, 'cif-collision'):
coll = []
for c in p.getanno('cif-collision'):
try:
s = c.traceid
assert ANNO.supported(c), "s = %s, coll = %s"%(s, coll)
except:
s = c
assert not ANNO.supported(c), "s = %s, coll = %s"%(s, coll)
coll.append(s)
return coll
def CAPTURE(self, fsm, p):
"""Simulate capture process for a Packet `p`."""
self.log("CAPSTART", p)
errmsg = "[CHANNELIF]: Cannot capture packet that doesn't support ANNO!"
assert ANNO.supported(p), errmsg
duration = const.EPSILON
self.rxbuffer.append(p) # add to rxbuffer
if self.intransmit: self.drop("all") # drop all packet in rxbuffer
# mark/use other annotations
self.set_recvanno(p)
if p.hasanno('cif-duration'): duration = p.getanno('cif-duration')
assert not(duration<const.EPSILON), \
"[CHANNELIF]: Invlaid duration in CAPTURE! (t=%s)"%(duration)
# resume operation
self.log("rxdata.sig", p)
self.rxdata.signal(p) # signal rxdata
yield hold, fsm, duration # simulate duration
if self.intransmit: self.drop("all") # drop all packet in rxbuffer
self.rxbuffer.remove(p) # remove from rxbuffer
# drop or forward to upper layer
if p.hasanno('cif-drp') and p.getanno('cif-drp'):
self.log_drop( p, halfduplex="%s"%(self.halfduplex) )
self.cleananno(p)
else:
pargs = {'cif-duration':time2usec(duration) }
self.log_recv(p, **pargs)
yield self.TXU.send(fsm, [p])
# signal rxdone
self.log("rxdone.sig", p)
self.rxdone.signal(p)
yield fsm.stop()
assert False, "stop failed!"
def calcrxwaveform(self, p, bandwidth=None):
"""Pre-compute receive waveform and set 'dot11n-rxwaveform'.
Use 'dot11n-channel' and 'dot11n-txwaveform' annotations to pre-compute
the received waveform (modulo intereference and noise).
"""
if bandwidth is None: bandwidth = DOT11N_BANDWIDTH
# check for annotations
for a in ['rxpower', 'dot11n-txwaveform', 'dot11n-channel']:
errmsg = "[DOT11N_DSP]: cannot find '%s' annotation!"%(a)
assert ANNO.supports(p,a), errmsg
A = db2linear(p.getanno('rxpower'))
H = p.getanno('dot11n-channel')
x = p.getanno('dot11n-txwaveform')
# check that channel dimensions match Ntx
nrx = H.rows()
ntx, hcols = x.rows(), H.cols()
assert (hcols == ntx), "[DOT11N]: Got channel with invalid dimensions!"
z = sqrt(A)*H.conv(x)
# apply local frequency offset (and doppler) if annotations are found
cfo = 0
if p.hasanno('tx-cfo') and p.hasanno('rx-cfo'):
cfo += p.getanno('tx-cfo') - p.getanno('rx-cfo')
if p.hasanno('doppler'):
cfo += p.getanno('doppler')
z.apply_offset(cfo, bandwidth)
# set rxwaveform annotation
p.setanno('dot11n-rxwaveform', z)
return p
def delrxwaveform(self, p):
"""Remove waveform annotations from packet `p`."""
wanno = ['dot11n-txwaveform', 'dot11n-rxwaveform', \
'dot11n-rxnoise', 'dot11n-rxadded', 'dot11n-channel']
for a in [w for w in wanno if ANNO.supports(p,w)]:
if p.hasanno(a): p.delanno(a)
return p
def SEND(self, fsm):
"""SEND state; simulate encoding and send process.
This state performs the following tasks:
1. Get packet from 'RXU' port.
2. Call `encode()` to generate waveform for outgoing packet.
3. Mark 'cif-duration' annotation with value returned by `duration()`.
4. Simulate `txproctime` for outgoing packet.
5. Send outgoing waveform to 'TXD'.
6. Simulate `duration` of waveform.
"""
while fsm.active():
yield self.RXU.recv(fsm, 1)
assert fsm.acquired(self.RXU) and (
len(fsm.got) == 1
), "[DOT11APHY]: Error receiving from RXU port in SEND()!"
p = fsm.got[0]
# simulate encoding and Tx processing time
w = self.encode(p)
duration = self.duration(p)
if ANNO.supported(w):
w.setanno("cif-duration", duration)
yield hold, fsm, self.txproctime(p)
# send waveform and simulate duration
self.log_send(w, duration=time2usec(duration))
yield self.TXD.send(fsm, [w])
assert fsm.stored(self.TXD), "[DOT11APHY]: Error sending to TXD in SEND!"
yield hold, fsm, duration
return
def RECV(self, fsm):
"""RECV state; monitor traffic from lower layer.
This state receives packets on `Port` 'RXD'. It then uses `ptype` to
determine which packet handler should process the new data packet, and
spawns a new thread to run the handler.
:note: Currently, IPv4 is the only protocol type supported. Non-IPv4
packets are passed to `ERRRECV` for handling.
"""
# error messages
rxderror = "[ROUTING]: Error occurred while receiving " + \
"traffic from RXD port!"
pkterror = "[ROUTING]: Invalid packet from lower layer!"
# get packet from lower layer
yield self.RXD.recv(fsm, 1)
assert fsm.acquired(self.RXD) and (len(fsm.got)==1), rxderror
p = fsm.got[0]
if isinstance(p, Reference): p = p._deref
assert ANNO.supported(p), pkterror
# use appropriate recv function based on ptype
if (self.ptype == const.ARP_PTYPE_IP):
f = FSM.launch(self.IPRECV, p) # IP ptype
else:
f = FSM.launch(self.ERRRECV, p) # unknown ptype
# continue in RECV
yield fsm.goto(self.RECV)
def framedetect(self, p, thresh=None):
"""Apply packet detection model for detecting training sequence; based
on signal-to-interference-and-noise ratio (SINR).
:param p: `Dot11A` packet being received.
:param thresh: Packet detection SINR threshold (in dB)
[default=`DOT11A_FDTHRESHOLD`].
:return: Boolean flag; if true, packet detection was successful.
This method checks to make sure `p` is a `Dot11A` packet, and that the
received SINR is greater than the receiver detection threshold `thresh`.
This method will also mark the 'dot11a-detect' annotation to indicate
the success (or failure) of the frame detection.
**Overload this method to change how frame detection works.**
:note: If `p` is not a `Dot11A` packet, this method will set the
'dot11a-detect' annotation to false and return false.
"""
if not isinstance(p, Dot11A):
if ANNO.supported(p):
p.setanno("dot11a-detect", False)
return False
# check SINR
if thresh is None:
thresh = DOT11A_FDTHRESHOLD
sinr = self.sinr(p)
detect = True
if sinr < thresh:
detect = False
# mark annotations
p.setanno("dot11a-detect", detect)
return detect
def SEND(self, fsm):
"""Manage downstream (or outgoing traffic."""
yield self.RXU.recv(fsm, 1)
assert fsm.acquired(self.RXU) and (len(fsm.got)==1), \
"[CHANNELIF]: SEND() error occurred during recv() from RXU!"
# get packet and set annotations
p, duration = fsm.got[0], 0
errmsg = "[CHANNELIF]: Cannot send packet that does not support ANNO!"
assert ANNO.supported(p), errmsg
self.set_sendanno(p)
if p.hasanno('cif-duration'): duration = p.getanno('cif-duration')
# min-time is const.EPSILON
if duration<const.EPSILON: duration = const.EPSILON
p.setanno('cif-duration', duration)
self.log_send(p)
# send and simulate duration
self.__ifstate = CHANNELIF_TX # start TX
self.drop("all") # drop all packet in rxbuffer
self.txdata.signal(p)
yield self.TXD.send(fsm, [p])
yield hold, fsm, duration # simulate duration
self.drop("all") # drop all packet in rxbuffer
self.__ifstate = CHANNELIF_RX # resume RX
self.txdone.signal(p)
# continue in SEND
yield fsm.goto(self.SEND)
def log_recv(self, p, *args, **kwargs):
"""Updated to print `RAI` parameters."""
if ANNO.supported(p):
if p.haslayer(RAI):
kwargs['rai-rate'] = p[RAI].rate
kwargs['rai-length'] = p[RAI].length
if p.hasanno('phy-rate'):
kwargs['phy-rate'] = p.getanno('phy-rate')
DCF.log_recv(self, p, *args, **kwargs)
def sinr_heap(self, p, force=True):
"""Calculate signal-to-interference-and noise ratio (SINR) for each
partition created by `interval_heap()`.
:param p: Packet to inspect.
:param force: If true, recalculate interval heap, else use existing
annotation if it exists.
:return: SINR heap.
SINR heap has looks like this:
[(t0, t1, sinr0), (t1, t2, sinr1), ... ]
Note: This method uses the 'rxpower' and 'noisepower' annotations.
"""
# check packet
errmsg = "[CHANNELIF]: sinr_heap() cannot process non-Packet!"
assert ANNO.supported(p), errmsg
for a in ['rxpower', 'noisepower']:
errmsg = "[CHANNELIF]: sinr_heap() cannot find '%s' annotation!"%(a)
assert ANNO.supports(p, a), errmsg
# get parameters
rxpower = p.getanno('rxpower') # in dBm
noisepower = p.getanno('noisepower') # in dBm
npow = db2linear(noisepower)
# get interval heap
if p.hasanno('cif-iheap') and not force:
iheap = p.getanno('cif-iheap')
else:
iheap = self.interval_heap(p)
# start creating sinr heap
sinrheap = []
#print "%s: SINR heap for %s @ %.8f"%(self.traceid, p.traceid, now())
for ta,tb,coll in iheap:
ipow = 0
for c in coll:
errmsg = "[CHANNELIF]: sinr_heap() cannot find 'rxpower' " + \
"annotation in collision list!"
assert ANNO.supports(c, 'rxpower'), errmsg
ipow += db2linear(c.getanno('rxpower') )
sinr = rxpower - linear2db(ipow + npow)
sinrheap.append((ta,tb,sinr) )
#print " --> (%.8f, %.8f): %.3f dB, coll = %s"%(ta,tb, sinr, [c.traceid for c in coll])
return sinrheap
def cleananno(self, p):
"""Remove unwanted annotations from packet `p`.
Removes any annotations that could cause cyclic references.
"""
if ANNO.supports(p, 'cif-collision'):
coll = strcollision(p)
p.delanno('cif-collision')
p.setanno('cif-collision', coll, priv=True)
return p
def cleananno(self, p):
"""Clean up annotations before passing to upper layers."""
assert ANNO.supported(p), "[PHY]: ANNO not supported!"
# replace/remove unwanted annotations
if p.hasanno('cif-collision'):
coll = strcollision(p)
assert (coll is not None)
p.delanno('cif-collision')
p.setanno('cif-collision', coll, priv=True)
return p
def DECODE(self, fsm, pkt):
"""DECODE state; monitor `radio` and manage packet decoding."""
r = self.radio
assert isinstance(r, Radio), "[DOT11A]: Cannot find radio in DECODE!"
assert self.isbusy, "[DOT11A]: Carrier sense *not* busy in DECODE!"
while fsm.active():
# monitor events and RXD port
yield self.RXD.recv(fsm, 1, renege=(r.rxdata, r.rxdone, r.txdata, r.txdone, self.detect))
# receive pkt -> apply error model and forward to upper layers
if fsm.acquired(self.RXD):
assert len(fsm.got) == 1, (
"[DOT11A]: Received unexpected " + "number of packets from 'RXD' port in DECODE state!"
)
p = fsm.got[0]
if p is pkt:
payload = self.decode(p)
if payload:
self.log_recv(p)
self.cleananno(p) # replace/remove unwanted annotations
p.remove_payload()
yield self.TXU.send(fsm, [payload])
yield hold, fsm, const.EPSILON # pause before resuming
pkt = None
# rxdone received before RXD -> interface dropped packet?
if r.rxdone in fsm.eventsFired:
p = r.rxdone.signalparam
if p is pkt:
qlen = self.RXD.length
drop = ANNO.supports(p, "cif-drp") and p.getanno("cif-drp")
errmsg = "[DOT11A]: Unexpected rxdone received in DECODE!"
assert (qlen == 0) and drop, errmsg
self.log_drop(p, drop="interface dropped packet")
pkt = None
# rxdata -> drop new packets
if r.rxdata in fsm.eventsFired:
p = r.rxdata.signalparam
assert p is not pkt, "[DOT11A]: Unexpected rxdata for pkt in DECODE!"
self.log_drop(p, drop="ignore rxdata in DECODE")
# detect -> drop detected packets
if self.detect in fsm.eventsFired:
p = r.rxdata.signalparam
assert p is not pkt, "[DOT11A]: Unexpected detect for pkt in DECODE!"
self.log_drop(p, drop="ignore detect in DECODE", decode=pkt.traceid)
# ignore otherwise
ignore = r.txdata in fsm.eventsFired
ignore = ignore or (r.txdone in fsm.eventsFired)
if ignore:
pass
# check if DECODE is done
if pkt is None:
yield fsm.goto(self.LISTEN)
return
def LISTEN(self, fsm, cif, rxport):
"""Listen to traffic sent by `ChannelInterface` on `rxport`."""
assert (self.hasport(rxport) is not None), \
"[CHANNEL]: Cannot listen on invalid Port!"
# get data from rxport
yield rxport.recv(fsm, 1)
assert fsm.acquired(rxport) and (len(fsm.got)==1), \
"[CHANNEL]: Error occurred during LISTEN on %s!"%(rxport)
# forward on all outgoing edge
p, u = fsm.got[0], cif
neighbors = [str(c.traceid) for c in self.graph.neighbors(u) ]
errmsg = "[CHANNEL]: Cannot forward non-Packet!"
assert isinstance(p, Packet), errmsg
for v in self.graph[u]:
cmodel = self.graph[u][v]['model']
errmsg = "[CHANNEL]: Cannot find corresponding TX Port!"
assert (self.hasport((v, "TX") ) is not None)
# if channel model for link is not active -> ignore packet
if not cmodel.active: continue
# filter packets using channel model
drop = self.apply_filter(cmodel, p, u, v)
if drop:
self.log("drp",p,drop=drop,src=u.traceid,dst=v.traceid)
continue # continue with next link
# copy and mark annotations
c, txport = p.copy(), self.getport((v, "TX") )
c.setanno('cif-src', u, ref=True)
c.setanno('cif-dst', v, ref=True)
# apply channel model
propdelay = None
r = self.apply_model(cmodel, c, u, v)
if cmodel.verbose>CHANNEL_VERBOSE:
cmodel.log_forward(c, src=u.traceid, dst=v.traceid)
if ANNO.supports(r, 'cm-delay'):
propdelay = r.getanno('cm-delay')
# forward to destination
if (r is None):
self.log("drp",c,action="dropped by %s"%(cmodel.traceid) )
elif (propdelay>0):
# apply propagation delay
f = FSM()
f.goto(self.FORWARD, txport, [r])
f.start(delay=propdelay)
else:
# send immediately (no delay)
yield txport.send(fsm, [r])
if self.verbose>CHANNEL_VERBOSE:
self.log("fwd", p, dest="%s"%(neighbors) )
# continue in LISTEN
yield fsm.goto(self.LISTEN, cif, rxport)
def set_recvanno(self, p):
"""Overloaded to modify noisepower with noise figure.
:return: Modified packet `p`.
This method adds the `DOT11A_NOISEFIGURE` to the noisepower specified by
`Radio`.
"""
r = Radio.set_recvanno(self, p)
if ANNO.supports(r, "noisepower"):
noisepower = r.getanno("noisepower")
noisepower += DOT11A_NOISEFIGURE
r.setanno("noisepower", noisepower)
return r
def LISTEN(self, fsm):
"""LISTEN state; monitor `radio` and manage packet detection."""
r = self.radio
assert isinstance(r, Radio), "[DOT11A]: Cannot find radio in LISTEN!"
while fsm.active():
# check rxenergy -> set csbusy?
rxenergy = r.rxenergy()
rxhigh = r.inreceive and (r.rxenergy() > DOT11A_CSTHRESHOLD)
if rxhigh:
self.set_csbusy(rxenergy="high, %.2f dBm" % (rxenergy), rxbuffer=[x.traceid for x in r.rxbuffer])
else:
self.set_csidle(rxenergy="%.2f dBm" % (rxenergy))
# monitor events and RXD port
yield self.RXD.recv(fsm, 1, renege=(r.rxdata, r.rxdone, r.txdata, r.txdone, self.detect))
# RXD -> ignore incoming packets in LISTEN
if fsm.acquired(self.RXD):
assert len(fsm.got) == 1, (
"[DOT11A]: Received unexpected " + "number of packets from 'RXD' port in LISTEN state!"
)
p = fsm.got[0]
self.log_drop(p, drop="not detected in LISTEN")
# rxdata -> start DETECT thread
if r.rxdata in fsm.eventsFired:
p = r.rxdata.signalparam
fname = "detect(%s)" % (p._id)
### XXX ####
f = FSM()
# f = self.newchild(fname, FSM, tracename=fname.upper() )
f.goto(self.DETECT, p)
f.start()
# detect -> set csbusy -> goto DECODE
if self.detect in fsm.eventsFired:
p = self.detect.signalparam
rxenergy = "%.2f dBm" % (r.rxenergy())
sinr = "%.2f dB" % (self.sinr(p))
self.set_csbusy(p, detect=True, rxenergy=rxenergy)
danno = "dot11a-detect"
errmsg = "[DOT11A]: Cannot find 'dot11a-detect' " + "annotation in detected packet!"
assert ANNO.supports(p, danno) and p.getanno(danno), errmsg
# yield hold, fsm, 0
self.log("detect", p, rxenergy=rxenergy, sinr=sinr, rxbuffer=[x.traceid for x in r.rxbuffer])
yield fsm.goto(self.DECODE, p)
# ignore otherwise
ignore = r.txdata in fsm.eventsFired
ignore = ignore or (r.txdone in fsm.eventsFired)
ignore = ignore or (r.rxdone in fsm.eventsFired)
if ignore:
pass
return
def rxenergy(self):
"""Calculate total receive energy of packets in `rxbuffer`.
:return: Receive power (in dBm), or -Inf if nothing is in `rxbuffer`.
This method uses the 'rxpower' annotation of packets in `rxbuffer` to
determine the total receive power. Any packets that do not support this
annotation will not contribute to the total power calculated.
"""
tot = 0 # sum total in milliwatts
for p in self.rxbuffer:
if ANNO.supports(p, 'rxpower'):
prx = p.getanno('rxpower') # rxpower in dBm
tot += db2linear(prx)
tot_dbm = linear2db(tot)
return tot_dbm
def set_recvanno(self, p, src, dst):
"""Set relevant annotations for received data to upper layer.
:param p: Packet to modify.
:param src: Network address of source.
:param dst: Network address of destination.
:return: Modified packet.
This method sets the 'net-src' and 'net-dst' annotations.
"""
errmsg = "[ROUTING]: Got non-Packet data from upper layer()!"
assert ANNO.supported(p), errmsg
# set address annotations
p.setanno('net-src', src)
p.setanno('net-dst', dst)
return p
def calcper_data(self, p, **kwargs):
"""Calculate probability of error for data decoding.
:param p: Packet being decoded.
:param kwargs: Additional keywords arguments passed to `sinr_heap()`
(or `sinr()`).
:return: PER for decoding packet payload.
This method sets the 'dot11a-sinr' and 'dot11a-per' annotations. The
operation of this method depends on `DOT11A_USE_PIECEWISE_PER`.
"""
for a in ["cif-rxts", "cif-duration"]:
errmsg = "[DOT11APHY]: calcper_data() cannot find " + "'%s' annotation!" % (a)
assert ANNO.supports(p, a), errmsg
# verify header parameters
plen = len(p.payload)
rate, length = p.rate, p.length
assert 0 <= rate < len(DOT11A_DATARATE), "[DOT11A]: Invalid rate option (%s)!" % (rate)
assert p.length == plen, "[DOT11A]: Header length reported " + "does not equal payload length; %s!=%s" % (
p.length,
plen,
)
# calculate PER using appropriate method
if DOT11A_USE_PIECEWISE_PER:
sinrheap = self.sinr_heap(p, **kwargs)
t1 = p.getanno("cif-rxts") + p.getanno("cif-duration")
t0 = t1 - self.calcnofdm(plen, rate) * DOT11A_TSYM
xheap = [(max(ta, t0), min(tb, t1), sinr) for (ta, tb, sinr) in sinrheap if (ta < t1) and (tb > t0)]
errmsg = "[DOT11APHY]: Unable to find valid data from SINR heap!"
assert len(xheap) > 0, errmsg
# calculate piecewise PER and average SINR
psuccess, stot = 1.0, 0.0
for ta, tb, sinr in xheap:
alpha = (tb - ta) / (t1 - t0)
dlen = plen * alpha
stot += db2linear(sinr) * alpha
psuccess *= 1.0 - self.calcper(dlen, rate, sinr)
per = 1.0 - psuccess
sinr = linear2db(stot)
else:
# configure modulation and coding to calculate PER
sinr, plen = self.sinr(p, **kwargs), length
per = self.calcper(plen, rate, sinr)
# set annotations and return PER
p.setanno("dot11a-sinr", sinr)
p.setanno("dot11a-per", per)
return per
def set_sendanno(self, p, src, dst):
"""Set relevant annotations for outgoing packet.
:param p: Packet to modify.
:param src: Network address of source.
:param dst: Network address of destination.
:return: Modified packet.
This method sets the 'net-src' and 'net-dst' annotations.
"""
errmsg = "[ROUTING]: Got non-Packet data from upper layer()!"
assert ANNO.supported(p), errmsg
# set address annotations
p.setanno('net-src', src)
p.setanno('net-dst', dst)
# set annotations used just for logging
p.setanno('net-root', str(p.traceid))
return p
def decode_header(self, p, checkcrc=False):
"""Waveform-level decoding of header.
:param p: Packet to decode.
:param checkcrc: If true, check header CRC.
Set `checkcrc` to false when using `decode_header()` to just do
detection. By default, the PHY does detection & decoding in the same
functions, so this method is allows for some slight variation in usage.
"""
# check annotations
assert isinstance(p, Dot11N)
for a in ['cif-rxts', 'dot11n-rxadded']:
errmsg = "[DOT11N]: Cannot find '%s' annotation!"%(a)
assert ANNO.supports(p, a), errmsg
errmsg = "[DOT11N]: Packet was not added to input!"
assert p.hasanno('dot11n-rxadded'), errmsg
# get rx input stream
y = self.getrxinput(p)
detect = self.receiver.decode_header(y, checkcrc) # check header crc?
prepad = int(self.MINPAD + DOT11N_TSHORT*DOT11N_BANDWIDTH)
startidx = self.receiver.start_index() - prepad
crcok = detect
# check header parameters
plen = len(p.payload)
# get header parameters from receiver after decoding
rate, length = self.receiver.mcs(), self.receiver.length()
okrate = (0<=rate<len(DOT11N_DATARATE) )
oklen = (length == plen)
okpar = crcok
# calculate start time
tstart = p.getanno('cif-rxts')
tstart += startidx/DOT11N_BANDWIDTH
p.setanno('dot11n-start-index', startidx)
p.setanno('dot11n-cfo', self.receiver.get_cfo() )
# return decoding parameters
if detect: header = "detect success"
else: header = "detect failed"
if checkcrc:
if crcok: header = "success"
else: header = "decoding failed"
param = {'status':header, 'detect':detect, 'crcok':crcok, \
'rate':rate, 'length':length, 'start':tstart}
return param
def SEND(self, fsm):
"""SEND state; monitor traffic from upstream protocol and pass to
routing algorithm.
This state uses the 'net-src' and 'net-dst' annotations to determine the
addresses of the source and destination. If not available, these values
default to the local `address` and `broadcast` address.
This state then uses `ptype` to determine which packet handler should
process the new data packet, and spawns a new thread to run the handler.
:note: Currently, IPv4 is the only protocol type supported. Non-IPv4
packets are passed to `ERRSEND` for handling. Also, this state
will check for loopback addresses and send them back to the upper
layer protocol.
"""
# error messages
rxuerror = "[ROUTING]: Error occurred receiving from RXU port!"
pkterror = "[ROUTING]: Invalid packet from upper layer!"
# get packet to send from upperlayer
yield self.RXU.recv(fsm, 1)
assert fsm.acquired(self.RXU) and (len(fsm.got)==1), rxuerror
p = fsm.got[0]
if isinstance(p, Reference): p = p._deref
assert ANNO.supported(p), pkterror
# process new data packet
addr = self.address
src, dst = addr, self.broadcast
if p.hasanno('net-src'): src = p.getanno('net-src')
if p.hasanno('net-dst'): dst = p.getanno('net-dst')
r = self.set_sendanno(p, src, dst)
# send loopback back to upper layer
if (dst==addr):
self.log_loopback(p, src=src, dst=dst)
yield self.TXU.send(fsm, [p])
yield fsm.goto(self.SEND) # continue in SEND
# otherwise -> use appropriate send function based on ptype
if (self.ptype == const.ARP_PTYPE_IP):
f = FSM.launch(self.IPSEND, r, src, dst) # IP ptype
else:
f = FSM.launch(self.ERRSEND, r, src, dst) # unknown ptype
# continue in SEND
yield fsm.goto(self.SEND)
def decode_data(self, p):
"""Waveform-level decoding of packet payload.
:param p: Packet to decode.
:return: Decoded data string.
"""
# check annotations
assert isinstance(p, Dot11N)
for a in ['cif-rxts', 'dot11n-header', 'dot11n-detect', 'dot11n-rxadded']:
errmsg = "[DOT11N]: Cannot find '%s' annotation!"%(a)
assert ANNO.supports(p, a), errmsg
errmsg = "[DOT11N]: Packet was not added to input!"
assert p.hasanno('dot11n-rxadded'), errmsg
errmsg = "[DOT11N]: Packet was not detected!"
assert p.getanno('dot11n-detect'), errmsg
header = p.getanno('dot11n-header')
errmsg = "[DOT11N]: Header decoding failed before decode_data()!"
assert (header=="success"), errmsg
# get parameters to check startidx
Ngi = int(DOT11N_TGI*DOT11N_BANDWIDTH)
prepad = int(self.MINPAD + DOT11N_TSHORT*DOT11N_BANDWIDTH)
startidx = self.receiver.start_index() - prepad
## startidx = -8 # overwrite startidx
## self.receiver.set_start_index(prepad+startidx)
# decode payload -> check if startidx is valid
y = self.getrxinput(p)
data = self.receiver.decode_data(y)
# check if decoding error occurred
# -> do contents of data match and does CRC pass?
crcchk, error = "FAIL", True
if (data == str(p.payload)):
if not CRC32.haserror(data):
crcchk = "OK"
error = False
# hamming distance between decoded data and packet p
hdist = hamming_distance(data, str(p.payload) )
self.log("CRC", p.payload, crcchk=crcchk, error=error, hdist=hdist)
# clean up waveform annotations
self.delrxwaveform(p)
# return decoding parameters
param = {'data':data, 'error':error, 'nerror':hdist}
# return decoded data
return param
def seterror(self, p):
"""Convenience method to set error annotation (or parameters) in `p`.
:return: Modified packet with updated parameters/annotations.
By default, if packet `p` has a `CRC32` layer, this method will set the
'crcerror' field, otherwise this method will set the 'crcerror'
annotation to 1.
**Overload this method as needed.**
"""
hascrc = CRC32.supported(p)
hasanno = ANNO.supported(p)
if hascrc:
p[CRC32].crcerror = 1
elif hasanno:
p.setanno('crcerror', 1)
else:
raise RuntimeError, "[PHY]: seterror() failed to find packet!"
def getrxinput(self, p):
"""Get input to receiver for specified packet.
:param p: Packet to grab from input stream.
Get the samples corresponding to the input for a given packet. This uses
the timestamp annotation 'cif-rxts' and 'cif-duration' annotation to
find the appropriate input samples from `rxinput`.
"""
#self.stdout("%s: called getrxinput() on %s @ %.8f\n"%(self.traceid, p.traceid, now()))
errmsg = "[DOT11N]: in getrxinput(), no input stream found!"
assert (self.rxinput is not None), errmsg
# check annotations
for a in ['cif-rxts', 'cif-duration', 'dot11n-rxadded']:
errmsg = "[DOT11N]: Cannot find '%s' annotation!"%(a)
assert ANNO.supports(p, a), errmsg
assert p.getanno('dot11n-rxadded')
# calculate start/end of waveform
tstart = p.getanno('cif-rxts')
duration = p.getanno('cif-duration')
tend = tstart + duration
# pad returned waveform
minpad = self.MINPAD
tstart -= minpad/DOT11N_BANDWIDTH
tend += minpad/DOT11N_BANDWIDTH
# extract from input stream
rxts, w = self.rxinput
rxend = rxts + w.cols()/DOT11N_BANDWIDTH
errmsg = "[DOT11N]: in getrxinput(), packet starts before input " + \
"stream! tpacket, tbuffer = (%.6f, %.6f)"%(tstart, rxts)
assert (tstart>=rxts), errmsg
# calculare indices
istart = int((tstart-rxts)*DOT11N_BANDWIDTH)
istop = int((tend-rxts)*DOT11N_BANDWIDTH)-1
assert (istart>-1), "[DOT11N]: In getrxinput(), requested " + \
"packet starting before start of input stream!"
assert (istop<=w.cols()), "[DOT11N]: In getrxinput(), requested " + \
"packet beyond end of input stream!"
# get rxinput
y = w.get_cols(istart, istop)
return y
def haserror(self, p, *args, **kwargs):
"""Convenience method to determine if packet `p` has an error.
:param args: Additional arguments passed to `CRC32.haserror()`.
:param kwargs: Keyword arguments passed to `CRC32.haserror()`.
:return: Boolean; true if error is found; false otherwise.
By default, this method calls `CRC32.haserror()`. If no `CRC32` layer is
found, or no 'crcerror' annotation is found the packet is assumed to be
error-free.
**Overload this method as needed to change this operation.**
:note: This method ignores the CRC when `checkcrc` is set to false.
"""
hascrc = isinstance(p, Packet) and p.haslayer(CRC32)
hasanno = ANNO.supported(p) and p.hasanno('crcerror')
crcerror = (hascrc or hasanno) and CRC32.haserror(p,*args,**kwargs)
if not self.checkcrc:
crcerror = False # assume no error when checkcrc is false
return crcerror
def duration(self, p, *args, **kwargs):
"""Convenience method to get duration of packet `p`.
:return: Duration of packet `p` in seconds.
By default, this method calls `PHY.duration()` on the physical layer
associated with this `MAC` (i.e. `phy`). If `phy` is not a valid `PHY`,
this method will attempt to find and return the 'cif-duration' annotation.
Overload this method as needed.
:note: If duration cannot be determined, this method may raise an
exception.
"""
if isinstance(self.phy, PHY):
return self.phy.duration(p, *args, **kwargs)
elif ANNO.supports(p, 'cif-duration'):
return p.getanno('cif-duration')
else:
raise RuntimeError, "[MAC]: Could not determine duration! " + \
"No valid PHY and 'cif-duration' annotation not found!"
def calcper_header(self, p, **kwargs):
"""Calculate probability of error for header decoding.
:param p: Packet being decoded.
:param kwargs: Additional keywords arguments passed to `sinr_heap()`
(or `sinr()`).
:return: PER for header decoding.
This method sets the 'dot11a-sinr' and 'dot11a-per' annotations. The
operation of this method depends on `DOT11A_USE_PIECEWISE_PER`.
"""
for a in ["cif-rxts"]:
errmsg = "[DOT11APHY]: calcper_header() cannot find " + "'%s' annotation!" % (a)
assert ANNO.supports(p, a), errmsg
# calculate PER using appropriate method
plen = len(p.payload)
if DOT11A_USE_PIECEWISE_PER:
sinrheap = self.sinr_heap(p, **kwargs)
t0 = p.getanno("cif-rxts") + DOT11A_TSHORT + DOT11A_TLONG
t1 = t0 + DOT11A_TSIGNAL
xheap = [(max(ta, t0), min(tb, t1), sinr) for (ta, tb, sinr) in sinrheap if (ta < t1) and (tb > t0)]
errmsg = "[DOT11APHY]: Unable to find valid data from SINR heap!"
assert len(xheap) > 0, errmsg
# calculate piecewise PER and average SINR
psuccess, stot = 1.0, 0.0
for ta, tb, sinr in xheap:
alpha = (tb - ta) / (t1 - t0)
hlen = len(Dot11A()) * alpha
stot += db2linear(sinr) * alpha
psuccess *= 1.0 - self.calcper(hlen, 0, sinr)
per = 1.0 - psuccess
sinr = linear2db(stot)
else:
sinr, hlen = self.sinr(p, **kwargs), len(p) - plen
# configure modulation and coding to calculate PER
per = self.calcper(hlen, 0, sinr)
# set annotations and return PER
p.setanno("dot11a-sinr", sinr)
p.setanno("dot11a-per", per)
return per
def sinr(self, p, **kwargs):
"""Calculate signal-to-interference-and-noise ratio (SINR).
:param p: Packet to compute SINR for.
:param kwargs: Additional keyword arguments passed to `sinr_heap()`.
This method uses the 'rxpower', 'noisepower', and 'cif-collision'
annotations to calculate the SINR of the received packet p.
:note: This method sets the 'phy-sinr' annotation indicating the SINR (in dB).
"""
for a in ["rxpower", "noisepower", "cif-collision"]:
errmsg = "[DOT11APHY]: sinr() cannot find '%s' annotation!" % (a)
assert ANNO.supports(p, a), errmsg
# get SINR heap
sinrheap = self.sinr_heap(p, **kwargs)
minsinr = +inf
# find minimum SINR
for ta, tb, sinr in sinrheap:
if sinr < minsinr:
minsinr = sinr
# set annotations
p.setanno("phy-sinr", minsinr)
return minsinr
