def __init__(self, cursor):
threading.Thread.__init__(self)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(17, 0)
self.cursor = cursor
self.start()
self.shot = False
def setup_servo():
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(18,2) # hardware pwm only works on GPIO port 18
wiringpi.pwmSetMode(0)
wiringpi.pwmSetClock(375)
wiringpi.pwmSetRange(1024)
wiringpi.pwmWrite(18,0)
def initPorts(): # # define constants # INPUT = 0 OUTPUT = 1 PUD_UP = 2 # # use Broadcom GPIO pin scheme # gpio.wiringPiSetupGpio() # comparator output is PGOOD - needs pull-up # gpio.pinMode(PGOOD,INPUT) gpio.pullUpDnControl(PGOOD,PUD_UP) # # gpio.pinMode(CSb,OUTPUT) gpio.pinMode(UDb,OUTPUT) # # cs* -> 1 to deselect; USb is don't care # gpio.digitalWrite(CSb,1) return
def main():
global lcd
global inactivity_timer
global motion_sensor
global distance_sensor
global lcd
global buzzer
global led
global last_pullup_time
global pullup_count_alltime
global pullups_to_go
global storage
wiringpi.wiringPiSetupGpio()
init_storage()
inactivity_timer = InactivityTimer(wakeup, shutdown, config.SHUTDOWN_DELAY)
motion_sensor = MotionSensor(wiringpi, config.MOTION, inactivity_timer.trigger)
distance_sensor = DistanceSensor(wiringpi, config.SONIC_ECHO, config.SONIC_TRIG)
lcd = Display(config.LCD_RS, config.LCD_E, config.LCD_D4, config.LCD_D5, config.LCD_D6, config.LCD_D7, config.LCD_K)
buzzer = Buzzer(wiringpi, config.BUZZER)
led = Led(wiringpi, config.LED_PIN)
distance_resetted = True
shutdown()
while True:
if inactivity_timer.is_active():
distance = distance_sensor.measure()
distance_str = "{:13.2f}".format(distance)
if config.DEBUG:
print(distance_str + " cm")
# if wiringpi.millis() % 5 == 0:
# lcd.message(0, 0, distance_str + " cm")
# only count a pullup if:
# - distance is smaller than 5cm
# - distance was resetted (athlete moved more than 20 cm away from sensor)
# - last pullup was done more than 1 second ago
if 0 < distance < config.COUNT_DISTANCE and distance_resetted and wiringpi.millis() > (last_pullup_time + config.RESET_TIME):
buzzer.beep(5000)
distance_resetted = False
cnt = count_pullup()
lcd.clear()
lcd.message(0, 0, "Pullups: " + str(cnt).rjust(5))
lcd.message(0, 1, "2do2day: " + str(pullups_to_go).rjust(5))
elif distance > config.RESET_DISTANCE:
distance_resetted = True
delay_milli(100)
inactivity_timer.loop()
motion_sensor.sense()
if config.DEBUG and inactivity_timer.is_active() == 1:
print("shutting down in " + inactivity_timer.get_seconds_till_shutdown() + " seconds")
def __init__(self):
led.wiringPiSetupGpio()
led.pinMode(18, 2) # sets GPIO 24 to output
#self.pwmLed=pwmLed
#self.ledPin=18
self.pwmThread=threading.Thread(target=self.fade)
def initQTI(self,wiring=True):
#pin = pinNum
if wiring == True:
wp.wiringPiSetup()
wp.wiringPiSetupGpio()
wp.wiringPiSetupPhys()
else:
GPIO.setmode(GPIO.BOARD)
def setup():
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(25,1) #red light
wiringpi.digitalWrite(25,0) #red is off
wiringpi.pinMode(24,1) #green light
wiringpi.digitalWrite(24,0) #green is off
flash(2)
def Main():
print 'AR600 signal configuration tool.\nPlease follow instructions on screen.'
print 'To cancel, kill this process via Ctrl+Z. Lazy I know :D'
wiringpi.wiringPiSetupGpio()
signals = [PWMSignal(5, 'Thro', True, 'right stick, horizontal', 'left', 'right'),
PWMSignal(6, 'Aile', False, 'left stick, vertical', 'up', 'down'),
PWMSignal(19, 'Elev', True, 'right stick, vertical', 'up', 'down'),
PWMSignal(26, 'Rudo', True, 'left stick, horizontal', 'left,', 'right'),
PWMSignal(21, 'Gear', False, 'trainer binary switch', '0 (away from you)', '1 (towards you)'),
PWMSignal(20, 'Aux1', False, 'left trigger switch', 'towards you', 'default position (away from you)')]
for signal in signals:
print '-> Now configuring ' + signal.name
print 'Please move ' + signal.descr + ', maximally ' + signal.descrMax + \
', hold for 2 seconds and hit Ctrl+C.'
try:
while True:
signal.Update()
except KeyboardInterrupt:
signal.SetMax()
print 'Set: ' + str(signal.maxVal)
print 'Please move ' + signal.descr + ', maximally ' + signal.descrMin + \
', hold for 2 seconds and hit Ctrl+C.'
try:
while True:
signal.Update()
except KeyboardInterrupt:
signal.SetMin()
print 'Set: ' + str(signal.minVal)
if not signal.input.hasNeutral:
continue
print 'Please move ' + signal.descr + ', to neutral position, hold for 2 seconds and hit Ctrl+C.'
try:
while True:
signal.Update()
except KeyboardInterrupt:
signal.SetNeu()
print 'Set: ' + str(signal.neuVal)
f = open("radio.cfg", "w")
for signal in signals:
tuple = (signal.name, str(signal.maxVal), str(signal.minVal), str(signal.neuVal))
f.write(",".join(tuple))
f.write("\n")
f.close()
print 'Configuration data saved to radio.cfg'
def Init():
global on, timeOfLastChange
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(27, 1)
wiringpi.pullUpDnControl(27, 1)
wiringpi.digitalWrite(27, 1) # switch on LEDs
on = True
timeOfLastChange = time.time()
procComms.PrintLog('Switched on LEDs.')
def __init__(self):
wiringpi2.wiringPiSetupGpio()
self.SPEAKER = 18
self.MODE_PWM = 2
wiringpi2.pinMode(self.SPEAKER, self.MODE_PWM)
wiringpi2.pwmSetMode(wiringpi2.GPIO.PWM_MODE_MS)
wiringpi2.pwmWrite(self.SPEAKER, 0)
def __init__(self, base0 = 27, base90 = 73):
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(18,2)
wiringpi.pwmSetMode(0)
wiringpi.pwmSetClock(400)
wiringpi.pwmSetRange(1024)
wiringpi.pwmWrite(18, 0)
self.base0 = base0
self.base90 = base90
self.setAngle(90)
def __init__(self, forward, backward):
self.forward = forward
self.backward = backward
self.status = 0
wiringpi2.wiringPiSetupGpio()
wiringpi2.pinMode(forward, 1) # sets GPIO forward to output
wiringpi2.pinMode(backward, 1)
wiringpi2.softPwmCreate(forward, 0, 100)
wiringpi2.softPwmCreate(backward, 0, 100)
def __init__(self,in1,in2,in3):
self.in1 = in1
self.in2 = in2
self.in3 = in3
GPIO.setmode(GPIO.BCM)
GPIO.setup(self.in1,GPIO.OUT)
GPIO.setup(self.in2,GPIO.OUT)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(self.in3, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(375)
wiringpi.pwmWrite(self.in3,0)
def __init__(self, name, pinToWatch, triggerOnHigh = True, debounceTimeInSeconds = 0): self._watchPin = pinToWatch self._dataLock = Lock() self._name = name self._triggerOnHigh = triggerOnHigh self._debounceTimedelta = timedelta(seconds=debounceTimeInSeconds) wiringpi.wiringPiSetupGpio() wiringpi.piHiPri(99) wiringpi.wiringPiISR(self._watchPin, wiringpi.GPIO.INT_EDGE_BOTH, DoorbellSensor.gpioCallback, self) if bool(wiringpi.digitalRead(self._watchPin)) == self._triggerOnHigh: self._timeLastTriggered = datetime.today()
def init():
#Initialize wiringpi interface
wiringpi.wiringPiSetupGpio()
# Enter all known sensors into array
sensors.append(Sensor(CENTER_TRIG, CENTER_ECHO, 0))
#sensors.append(Sensor(CENTER_TRIG, RIGHT_SENSE_ECHO, 1))
#sensors.append(Sensor(CENTER_TRIG, LEFT_SENSE_ECHO, -1))
wiringpi.digitalWrite(OUTPUT_ENABLED, HIGH)
for sensor in sensors:
wiringpi.pinMode(sensor.trigger, OUTPUT)
wiringpi.pinMode(sensor.echo, OUTPUT)
def __init__(self):
self.thrd_sleep_duration = 0.2 # sec
self.light_pin = 18
self.started = False
self.exit_flag = threading.Event()
self.brightness = 0.0 # 0.0 to 1.0
self.ctrl_events = []
if not TEST_MODE:
IO.wiringPiSetupGpio()
IO.pinMode(self.light_pin, IO.GPIO.PWM_OUTPUT)
IO.pwmSetClock(1920)
IO.pwmSetRange(100)
def __init__(self):
wiringpi.wiringPiSetupGpio()
# Set pin states
wiringpi.pinMode(enable_led_a, 1)
wiringpi.pinMode(enable_led_b, 1)
wiringpi.pinMode(sensor, 0)
wiringpi.pinMode(enable_motor_a, 1)
wiringpi.pinMode(enable_motor_b, 1)
wiringpi.digitalWrite(enable_led_a, 0)
wiringpi.digitalWrite(enable_led_b, 0)
wiringpi.digitalWrite(enable_motor_a, 0)
wiringpi.digitalWrite(enable_motor_b, 0)
def setup(self, data, clock, latch):
self.dataPin = data
self.clockPin = clock
self.latchPin = latch
wiringpi2.wiringPiSetupGpio()
wiringpi2.pinMode(self.latchPin,1)
wiringpi2.pinMode(self.dataPin,0)
wiringpi2.pinMode(self.clockPin,1)
## wiringpi2.digitalWrite(self.dataPin,0)
wiringpi2.digitalWrite(self.clockPin,0)
wiringpi2.digitalWrite(self.latchPin,1)
def init(): GPIO.setmode(GPIO.BCM) wiringpi.wiringPiSetupGpio() wiringpi.pinMode(LEFT_MOTOR_PWM, 2) wiringpi.pinMode(RIGHT_MOTOR_PWM, 2) wiringpi.pwmSetMode(0) wiringpi.pwmSetClock(CLK_DIVISOR) wiringpi.pwmSetRange(MAX_SPEED) wiringpi.pwmWrite(LEFT_MOTOR_PWM, 0) wiringpi.pwmWrite(RIGHT_MOTOR_PWM, 0) GPIO.setup(LEFT_MOTOR_A, GPIO.OUT) GPIO.setup(LEFT_MOTOR_B, GPIO.OUT) GPIO.setup(RIGHT_MOTOR_A, GPIO.OUT) GPIO.setup(RIGHT_MOTOR_B, GPIO.OUT)
def __init__(self, name, pinToWatch, triggerOnHigh = True): self._watchPin = pinToWatch self._dataLock = Lock() self._name = name self._triggerOnHigh = triggerOnHigh wiringpi.wiringPiSetupGpio() wiringpi.piHiPri(99) wiringpi.wiringPiISR(self._watchPin, wiringpi.GPIO.INT_EDGE_BOTH, Sensor.gpioCallback, self) if bool(wiringpi.digitalRead(self._watchPin)) == self._triggerOnHigh: self._lastStatus = True else: self._lastStatus = False self._triggerEnded = datetime.today()
def manageGpio(value, numOutput): #config gpios with wiringpi2 library wiringpi2.wiringPiSetupGpio() wiringpi2.pinMode(23, 1) wiringpi2.pinMode(24, 1) if value == '\x05' and numOutput == 'P1': wiringpi2.digitalWrite(23,1) wiringpi2.digitalWrite(24,0) elif value == '\x05' and numOutput == 'P2': wiringpi2.digitalWrite(23,0) wiringpi2.digitalWrite(24,1) else: wiringpi2.digitalWrite(23,0) wiringpi2.digitalWrite(24,0)
def setupIO():
# Initialisation des entrées sorties sur le GrovePi #
grovepi.pinMode(relay_pin,"OUTPUT")
grovepi.pinMode(RGB_pin,"OUTPUT")
grovepi.pinMode(PIR_pin, "INPUT")
grovepi.chainableRgbLed_init(RGB_pin,8)
# On génère un PWM hardware de fréquence 50Hz #
# La largeur de l'impulsion est entre 0,8 et 2ms #
wiringPi.wiringPiSetupGpio()
wiringPi.pinMode(PWM_GPIO, 2)
wiringPi.pwmSetMode(0)
wiringPi.pwmSetClock(384)
wiringPi.pwmSetRange(1024)
wiringPi.pwmWrite(PWM_GPIO,75)
def __init__(self):
wiringPi.wiringPiSetupGpio()
for i in PINS:
wiringPi.pinMode(i, 0)
wiringPi.pinMode(CLOCK, 1)
wiringPi.pinMode(ACK, 1)
self.time0 = time.time()
self.time1 = time.time()-self.time0
self.time2 = time.time()-self.time0
self.bits = [0 for i in range(0,10)]
self.words = [self.bits[:] for i in range(0,10)]
wiringPi.digitalWrite(ACK, 1)
time.sleep(CLKSPD)
def io_init():
global io_initialized
if io_initialized:
return
wiringpi2.wiringPiSetupGpio()
wiringpi2.pinMode(12, wiringpi2.GPIO.PWM_OUTPUT)
wiringpi2.pinMode(13, wiringpi2.GPIO.PWM_OUTPUT)
wiringpi2.pwmSetMode(wiringpi2.GPIO.PWM_MODE_MS)
wiringpi2.pwmSetRange(MAX_SPEED)
wiringpi2.pwmSetClock(2)
wiringpi2.pinMode(5, wiringpi2.GPIO.OUTPUT)
wiringpi2.pinMode(6, wiringpi2.GPIO.OUTPUT)
io_initialized = True
def listener():
rospy.init_node('listener', anonymous=True)
rospy.Subscriber("chatter", String, callback)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(pin,2)
wiringpi.pwmSetMode(0)
wiringpi.pwmSetClock(400)
wiringpi.pwmSetRange(1024)
wiringpi.pwmWrite(pin,0)
wiringpi.pinMode(pin_dir[0],1)
wiringpi.pinMode(pin_dir[1],1)
# spin() simply keeps python from exiting until this node is stopped
rospy.spin()
def main():
if DEBUG == 1:
if not wiringpi2_module:
print 'wirinpi2 not installed!'
# Inizializza log
flog = ET.parse(CFGFILENAME).find("log[@file]").attrib['file']
# Lettura del tipo file di log (D per giornaliero, M per mensile)
logtype = ET.parse(CFGFILENAME).find("log[@type]").attrib['type']
# Istanzia log
logobj = Log(flog,logtype)
# Controlla la presenza della connessione ad internet.
if not internet_alive():
# Internet non disponibile!
cnt = 1
tcheck = 60
while cnt < 3:
# Calcolo tempo intervallo tentativi
tcheck = tcheck * cnt
logobj.write('Rilevato problema con connessione internet. Prossimo tentativo tra ' + str(tcheck/60) + ' minuto/i...')
if DEBUG == 1:
print 'Rilevato problema con connessione internet. Prossimo tentativo tra ' + str(tcheck/60) + ' minuto/i...'
# Attendi...
time.sleep(tcheck)
# Incrementa contatore tentativi
cnt = cnt + 1
if DEBUG == 1:
print cnt
if not internet_alive():
# Dopo il terzo tentativo riavvia il router.
if cnt == 3:
# Inizializza pin GPIO come output
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(GPIO_ROUTER_ADDR, 1)
# Riavvia il router
wiringpi.digitalWrite(GPIO_ROUTER_ADDR, 1) # OFF
time.sleep(5)
wiringpi.digitalWrite(GPIO_ROUTER_ADDR, 0) # ON
logobj.write('Router riavviato. Arrivederci :)')
if DEBUG == 1:
print 'Router riavviato. Arrivederci :)'
else:
# Internet OK
logobj.write('Internet OK. Arrivederci :)')
if DEBUG == 1:
print 'Internet OK. Arrivederci :)'
break
def main():
OUTPUT = 2
PWM_PIN = 18
SLEEP_TIME = 0.03
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(PWM_PIN, OUTPUT)
for i in range(0, 1024, 16):
print(i)
wiringpi.pwmWrite(PWM_PIN, i)
time.sleep(SLEEP_TIME)
for i in range(1024, 0, -16):
print(i)
wiringpi.pwmWrite(PWM_PIN, i)
time.sleep(SLEEP_TIME)
def initialize():
"""Set pins as outputs and start all lights in the off state."""
if _EXPORT_PINS:
logging.info("Running as non root user, disabling pwm mode on "
"all pins")
for pin in xrange(GPIOLEN):
PIN_MODES[pin] = "onoff"
is_pin_pwm[pin] = False
wiringpi.wiringPiSetupSys()
else:
# TODO(mdietz): Configrable pin mode or GPIO mode
#wiringpi.wiringPiSetup()
wiringpi.wiringPiSetupGpio()
enable_device()
set_all_pins_as_outputs()
turn_off_all_lights()
def __init__(self):
wiringpi2.wiringPiSetupGpio()
self.SPEAKER = 18
self.MODE_PWM = 2
self.divisor = (19.2*(10**3))/440
wiringpi2.pinMode(self.SPEAKER, self.MODE_PWM)
wiringpi2.pwmSetMode(wiringpi2.GPIO.PWM_MODE_MS)
screen = curses.initscr()
curses.start_color()
self.window = curses.newwin(10, 80, 5, 5)
curses.init_pair(1, curses.COLOR_RED, curses.COLOR_BLACK)
curses.init_pair(2, curses.COLOR_GREEN, curses.COLOR_BLACK)
def Main():
procComms.PrintLog('Initializing...')
wiringpi.wiringPiSetupGpio()
inputs = []
inputs.append(Input(5, 'Thro', True))
inputs.append(Input(6, 'Aile', False))
inputs.append(Input(19, 'Elev', True))
inputs.append(Input(26, 'Rudo', True))
inputs.append(Input(21, 'Gear', False))
inputs.append(Input(20, 'Aux1', False))
time.sleep(2) # wait for 2 secs for other subprocesses to initialize
while keepRunning:
for input in inputs:
input.Update()
import wiringpi2 as wiringpi
from time import sleep
wiringpi.wiringPiSetupGpio() #setup for BCM mode
wiringpi.pinMode(18, 2) #enable PWM on GPIO18
wiringpi.pwmWrite(18, 0) #set duty cycle to 0 (range is 0-1024)
delay_time = 0.002
try:
while True:
for dc in range(0, 1025):
wiringpi.pwmWrite(18, dc)
sleep(delay_time)
for dc in range(1024, -1, -1):
wiringpi.pwmWrite(18, dc)
sleep(delay_time)
except KeyboardInterrupt:
pass
finally:
wiringpi.pwmWrite(18, 0) #turn off PWM mode
wiringpi.pinMode(18, 0) #reset GPIO18 to input
#!/usr/bin/env python
# -*- coding: utf-8 -*-
import sys
import wiringpi2
import time
# GPIOの指定をGPIO番号に設定する。
if wiringpi2.wiringPiSetupGpio() == -1:
sys.exit(1)
# 使用するGPIOポート
port = 18
# 指定のGPIOの出力方向を決める。
# GPIO.INPUT, GPIO.OUTPUT, GPIO.PWM_OUTPUT, GPIO_CLOCK
wiringpi2.pinMode(port, wiringpi2.GPIO.PWM_OUTPUT)
SLEEP_TIME = 0.01
val = 0
while True:
try:
for pw in range(1024):
wiringpi2.pwmWrite(port, pw)
time.sleep(SLEEP_TIME)
for pw in range(1024 - 1, 0 - 1, -1):
wiringpi2.pwmWrite(port, pw)
time.sleep(SLEEP_TIME)
except KeyboardInterrupt:
break
except:
#!/usr/bin/env python
import rospy
import subprocess
from time import time, sleep, localtime
from sensor_msgs.msg import Imu, Temperature
from wiringpi2 import wiringPiSetupGpio, pinMode, digitalRead, digitalWrite, GPIO
wiringPiSetupGpio()
if rospy.has_param('/topic_ui/clk'):
CLK = rospy.get_param('/topic_ui/clk')
if rospy.has_param('/topic_ui/dio'):
DIO = rospy.get_param('/topic_ui/dio')
"""
A
---
F | | B
-G-
E | | C
---
D
"""
class TM1637:
I2C_COMM1 = 0x40
I2C_COMM2 = 0xC0
I2C_COMM3 = 0x80
except:
ser = None
print "Error opening serial port"
try:
ser.write(cmd)
except:
print "Error sending data to serial port"
try:
ser.close()
except:
print "Error closing port"
ser = None
if __name__ == "__main__":
wiringpi2.wiringPiSetupGpio() # BCM numeration
#motors pins set to output
wiringpi2.pinMode(gpio_enableMotors, 1)
wiringpi2.pinMode(gpio_leftPwm, 1)
wiringpi2.pinMode(gpio_left1, 1)
wiringpi2.pinMode(gpio_left2, 1)
wiringpi2.pinMode(gpio_rightPwm, 1)
wiringpi2.pinMode(gpio_right1, 1)
wiringpi2.pinMode(gpio_right2, 1)
wiringpi2.pinMode(gpio_lights, 1)
stop()
#enabling motor controller
wiringpi2.digitalWrite(gpio_enableMotors, 1)
http_server = tornado.httpserver.HTTPServer(application)
http_server.listen(80)
tornado.ioloop.IOLoop.instance().start()
# pwm_gpio18.py
#
# Feb/20/2017
#
# --------------------------------------------------------------------
import sys
import RPi.GPIO as GPIO
from time import sleep
import wiringpi2 as wiringpi
# --------------------------------------------------------------------
sys.stderr.write("*** 開始 ***\n")
#
PWM0 = 18
PWM1 = 19
wiringpi.wiringPiSetupGpio() # GPIO名で番号を指定する
wiringpi.pinMode(PWM0, wiringpi.GPIO.PWM_OUTPUT) # PWM出力を指定
wiringpi.pinMode(PWM1, wiringpi.GPIO.PWM_OUTPUT) # PWM出力を指定
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS) # 周波数を固定するための設定
wiringpi.pwmSetClock(375) # 50 Hz。18750/(周波数) の計算値に近い整数
# PWMのピン番号18とデフォルトのパルス幅をデューティ100%を1024として指定
# ここでは6.75%に対応する69を指定
wiringpi.pwmWrite(PWM0, 69)
wiringpi.pwmWrite(PWM1, 69)
count = 0
try:
while True:
sys.stderr.write("%d\n" % count)
count += 1
wiringpi.pwmWrite(PWM0, 69)
# SPI channle (0 or 1)
SPI_CH = 0
# pin base (above 64)
PIN_BASE=70
# GPIO number
LED_PIN = 25
# threshold
THRESHOLD = 200
# setup
wp.mcp3002Setup (PIN_BASE, SPI_CH)
wp.wiringPiSetupGpio()
wp.pinMode(LED_PIN, wp.GPIO.OUTPUT)
# if a sensor value is over THRESHOLD,
# flash led.
while True:
value = wp.analogRead(PIN_BASE)
print (value)
if value > THRESHOLD:
wp.digitalWrite(LED_PIN, wp.GPIO.HIGH)
time.sleep(0.2)
wp.digitalWrite(LED_PIN, wp.GPIO.LOW)
time.sleep(0.2)
requests.post("http://maker.ifttt.com/trigger/button_pressed/with/key/7nP8omSWbqca3Cdryst5c", json={"value1": "Yes"})
connector = MySQLdb.connect(host="localhost", db="logging", user="******", passwd="choooh1031", charset="utf8")
def initialize():
GPIO.setmode(GPIO.BCM)
GPIO.setup(outpin, GPIO.OUT)
wiringpi.wiringPiSetupGpio()
wiringpi.softToneCreate(outpin)
def set_pwm(self):
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(self.gpio_pin, 2)
wiringpi.pwmSetMode(0)
wiringpi.pwmSetRange(self.range)
wiringpi.pwmWrite(self.gpio_pin, 0)
import wiringpi2 as wiringpi from time import * MUSIC = 18 PWM = 2 wiringpi.wiringPiSetupGpio() wiringpi.pinMode(18, 2) #sets MUSIC to pwm wiringpi.pwmWrite(18, 0) wiringpi.pwmWrite(18, 901) sleep(1) wiringpi.pwmWrite(18, 902) sleep(1) wiringpi.pwmWrite(18, 903) sleep(1) wiringpi.pwmWrite(18, 904) sleep(1) wiringpi.pwmWrite(18, 0)
def __init__(self):
wp.wiringPiSetupGpio()
wp.pinMode(22, 0)
wp.pullUpDnControl(22, 2)
import pygame, time, os, random
import wiringpi2 as io
from copy import deepcopy
pygame.init() # initialise graphics interface
os.environ['SDL_VIDEO_WINDOW_POS'] = 'center'
pygame.display.set_caption("Control Central")
pygame.event.set_allowed(None)
pygame.event.set_allowed([pygame.KEYDOWN, pygame.QUIT, pygame.MOUSEBUTTONDOWN])
screen = pygame.display.set_mode([1050, 480], 0, 32)
textHeight = 22
font = pygame.font.Font(None, textHeight)
random.seed()
try:
io.wiringPiSetupGpio()
except:
print "start IDLE with 'gksudo idle' from command line"
os._exit(1)
plugState = [False for n in range(0, 16)]
groupPins = [17, 17, 17, 17, 27, 27, 27, 27, 23, 23, 23, 23, 10, 10, 10, 10]
channelPins = [4, 18, 22, 24, 4, 18, 22, 24, 4, 18, 22, 24, 4, 18, 22, 24]
A_11Pin = 25
sendPin = 9
plugName = [
"Lounge1", "Lounge2", "Dining Room", "Kitchen", "Bedroom 1", "Bedroom 2",
"Bedroom 3", "Hall 1", "Landing", "Garage", "Porch", "Attic", "TV Lamp",
"Kitchen Lamp", "Hall 2", "Computer Room"
]
plugPicture = pygame.image.load("images/plug.png").convert_alpha()
def automatic():
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(17, 1)
wiringpi.pinMode(27, 1)
wiringpi.pinMode(22, 1)
wiringpi.pinMode(5, 1)
wiringpi.pinMode(6, 1)
input = raw_input("run y/n")
if input == "y":
run = True
wiringpi.digitalWrite(17, 0)
wiringpi.digitalWrite(27, 0)
wiringpi.digitalWrite(22, 0)
wiringpi.digitalWrite(5, 0)
wiringpi.digitalWrite(6, 0)
while (run):
try:
wiringpi.digitalWrite(17, 1)
sleep(0.004)
wiringpi.digitalWrite(27, 1)
sleep(0.004)
wiringpi.digitalWrite(22, 1)
sleep(0.004)
wiringpi.digitalWrite(5, 1)
sleep(0.004)
wiringpi.digitalWrite(6, 1)
print("HIGH")
sleep(0.004)
wiringpi.digitalWrite(17, 0)
sleep(0.004)
wiringpi.digitalWrite(27, 0)
sleep(0.004)
wiringpi.digitalWrite(22, 0)
sleep(0.004)
wiringpi.digitalWrite(5, 0)
sleep(0.004)
wiringpi.digitalWrite(6, 0)
print("LOW")
sleep(2)
wiringpi.digitalWrite(17, 1)
sleep(0.004)
wiringpi.digitalWrite(27, 1)
sleep(0.004)
wiringpi.digitalWrite(22, 1)
sleep(0.004)
wiringpi.digitalWrite(5, 1)
sleep(0.004)
wiringpi.digitalWrite(6, 1)
print("HIGH")
sleep(0.004)
wiringpi.digitalWrite(17, 0)
sleep(0.004)
wiringpi.digitalWrite(27, 0)
sleep(0.004)
wiringpi.digitalWrite(22, 0)
sleep(0.004)
wiringpi.digitalWrite(5, 0)
sleep(0.004)
wiringpi.digitalWrite(6, 0)
print("LOW")
except KeyboardInterrupt:
run = False
wiringpi.digitalWrite(17, 0)
wiringpi.digitalWrite(27, 0)
wiringpi.digitalWrite(22, 0)
wiringpi.digitalWrite(5, 0)
wiringpi.digitalWrite(6, 0)
sleep(1)
print("end")
def setUpAllPins(pinConfig):
wiringpi2.wiringPiSetupGpio()
print("Loading GPIO pins...")
for name, pin in pinConfig.items():
setUpPin(name, pin)
def init_wiringPi( self ):
wp.wiringPiSetupGpio()
return
import wiringpi2 #wiringpi2.wiringPiSetup() # For sequential pin numbering, one of these MUST be called before using IO functions #wiringpi2.wiringPiSetupSys() # For /sys/class/gpio with GPIO pin numbering #wiringpi2.wiringPiSetupGpio() # For GPIO pin numbering wiringpi2.wiringPiSetupGpio() # For GPIO pin numbering led_output_port = 1 # MOTOR DRIVER PORTS # enable A of the H-bridge port_motor_left_pwm = 18 # input 1 of the H-bridge port_motor_left_backward = 24 # input 2 of the H-bridge port_motor_left_forward = 23 # enable B of the H-bridge port_motor_right_pwm = 13 # input 3 of the H-bridge port_motor_right_backward = 12 # input 4 of the H-bridge port_motor_right_forward = 25 port_encoder_left_a = 19
def initialize(self):
wiringpi2.wiringPiSetupGpio()
wiringpi2.pinMode(port, wiringpi2.GPIO.INPUT)
def automatic():
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(17, 1)
wiringpi.pinMode(27, 1)
wiringpi.pinMode(22, 1)
wiringpi.pinMode(5, 1)
wiringpi.pinMode(6, 1)
TIMECONSTANT = 0.004
cycles = 10000
input = raw_input("run y/n")
if input == "y":
run = 0
wiringpi.digitalWrite(17, 0)
wiringpi.digitalWrite(27, 0)
wiringpi.digitalWrite(22, 0)
wiringpi.digitalWrite(5, 0)
wiringpi.digitalWrite(6, 0)
print("running {} cycles on all pins".format(cycles))
while (run < cycles):
try:
wiringpi.digitalWrite(17, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(27, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(22, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(5, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(6, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(17, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(27, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(22, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(5, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(6, 0)
print("HIGH")
sleep(2)
wiringpi.digitalWrite(17, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(27, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(22, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(5, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(6, 1)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(17, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(27, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(22, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(5, 0)
sleep(TIMECONSTANT)
wiringpi.digitalWrite(6, 0)
print("LOW")
sleep(TIMECONSTANT)
run = run + 1
except KeyboardInterrupt:
run = cycles
wiringpi.digitalWrite(17, 0)
wiringpi.digitalWrite(27, 0)
wiringpi.digitalWrite(22, 0)
wiringpi.digitalWrite(5, 0)
wiringpi.digitalWrite(6, 0)
sleep(1)
print("User ended premature")
return
def setup():
wiringpi2.wiringPiSetupGpio() # For GPIO pin numbering
CommandeMoteurs(0, 0, tensionBatterie)
#
f = open('GPSdata!_Saiko00.txt', 'w')
f.write("\n")
f.write(str(time.ctime()) + "\n")
check = 0
#
speedPrev = 0
newTrack = 0
goalComponentPrev = 0
listPosition = [LatLon(0, 0)]
#
GPIO.setmode(GPIO.BCM)
GPIO.setup(LED_RED, GPIO.OUT)
GPIO.setup(LED_GREEN, GPIO.OUT)
GPIO.setup(LED_BLUE, GPIO.OUT)
pi.wiringPiSetupGpio()
pi.pinMode(SAIL_SERVO_PIN, 2)
pi.pinMode(RUDDER_SERVO_PIN, 2)
pi.pwmSetMode(0)
pi.pwmSetRange(1024)
pi.pwmSetClock(375)
#
sailValue = (SAIL_FULLCLOSE + SAIL_FULLOPEN) / 2
if (SAIL_FULLCLOSE < 35 or SAIL_FULLOPEN > 55
or SAIL_FULLCLOSE > SAIL_FULLOPEN):
exit()
sailCntl = SailController(sailValue)
#
time.sleep(30)
def __init__(self, player):
"""
Class Initializer
:param player: link to lockable MPD Client object used to communicate with MPD
"""
ui.Scene.__init__(self)
#setup LCD Light (GPIO 18 (PWM) is connected to LCD Backlight
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(18,
wiringpi.PWM_OUTPUT) # pwm only works on GPIO port 18
# prepare signal handler for Ctrl+C and SIGTERM
signal.signal(signal.SIGINT, self.signal_handler)
signal.signal(signal.SIGTERM, self.signal_handler)
# init MPD Player Interface
self.player = player
self.player.link_scene(self)
# init last action timestamp
self.last_action_ts = pygame.time.get_ticks()
# load images
self.img_prev = ui.get_image('rewind-icon_s')
self.img_play = ui.get_image('play-icon_s')
self.img_pause = ui.get_image('pause-icon_s')
self.img_next = ui.get_image('forward-icon_s')
label_height = ui.theme.current.label_height
scrollbar_size = ui.SCROLLBAR_SIZE
# create menu
# create background image
self.showing_splash = True # remember we show splash screen image
self.background = ui.ImageButton(
ui.Rect(0, 16, 320, 215),
ui.get_image('splash', '/home/pi/music/images/'))
self.background.on_clicked.connect(self.button_click)
self.add_child(self.background)
# create label for currently playing song
self.now_playing = ui.Label(ui.Rect(0, 0, 320, label_height), '')
self.add_child(self.now_playing)
# create play control buttons (prev, play/pause, next)
self.buttons_visible = False
self.btn_prev = ui.ImageButton(ui.Rect(20, 88, 64, 64), self.img_prev)
self.btn_prev.on_clicked.connect(self.button_click)
self.btn_prev.hidden = True # initially hidden
self.add_child(self.btn_prev)
self.playicon = True # initially we show the play icon (False means show Pause Icon)
self.btn_play = ui.ImageButton(ui.Rect(120, 88, 64, 64), self.img_play)
self.btn_play.on_clicked.connect(self.button_click)
self.btn_play.hidden = True # initially hidden
self.add_child(self.btn_play)
self.btn_next = ui.ImageButton(ui.Rect(220, 88, 64, 64), self.img_next)
self.btn_next.on_clicked.connect(self.button_click)
self.btn_next.hidden = True # initially hidden
self.add_child(self.btn_next)
# create progress bar
self.progress_view = ui.ProgressView(ui.Rect(0, 231, 320, 9))
self.add_child(self.progress_view)
self.progress_view.hidden = True
self.set_lcd_brightness(self.DIM_BRIGHT) #light LCD