コード例 #1
0
def test_peerkey_pairwise_mismatch(dev, apdev):
    """RSN TKIP+CCMP AP and PeerKey between two STAs using different ciphers"""
    skip_with_fips(dev[0])
    ssid = "test-peerkey"
    passphrase = "12345678"
    params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
    params['peerkey'] = "1"
    params['rsn_pairwise'] = "TKIP CCMP"
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
                   pairwise="CCMP")
    dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
                   pairwise="TKIP")
    hwsim_utils.test_connectivity_sta(dev[0], dev[1])

    dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
    time.sleep(0.5)
    dev[1].request("STKSTART " + dev[0].p2p_interface_addr())
    time.sleep(0.5)
コード例 #2
0
ファイル: test_ap_pmf.py プロジェクト: AlejandroAbad/hostap
def test_ap_pmf_optional_2akm(dev, apdev):
    """WPA2-PSK AP with PMF optional (2 AKMs)"""
    ssid = "test-pmf-optional-2akm"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK WPA-PSK-SHA256";
    params["ieee80211w"] = "1";
    hostapd.add_ap(apdev[0]['ifname'], params)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
    dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[1].ifname, apdev[0]['ifname'])
    wt.require_ap_pmf_optional(apdev[0]['bssid'])
    wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
    wt.require_sta_key_mgmt(apdev[0]['bssid'], dev[0].p2p_interface_addr(),
                            "PSK-SHA256")
    wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
    wt.require_sta_key_mgmt(apdev[0]['bssid'], dev[1].p2p_interface_addr(),
                            "PSK-SHA256")
コード例 #3
0
ファイル: test_ap_pmf.py プロジェクト: AlejandroAbad/hostap
def test_ap_pmf_assoc_comeback(dev, apdev):
    """WPA2-PSK AP with PMF association comeback"""
    ssid = "assoc-comeback"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
    params["ieee80211w"] = "2";
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hapd.set("ext_mgmt_frame_handling", "1")
    dev[0].request("DISCONNECT")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"])
    if ev is None:
        raise Exception("Timeout on disconnection")
    hapd.set("ext_mgmt_frame_handling", "0")
    dev[0].request("REASSOCIATE")
    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
    if ev is None:
        raise Exception("Timeout on re-connection")
    if wt.get_sta_counter("assocresp_comeback", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("AP did not use association comeback request")
コード例 #4
0
def check_group_mgmt_cipher(dev, ap, cipher):
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    if cipher not in dev.get_capability("group_mgmt"):
        raise HwsimSkip("Cipher %s not supported" % cipher)
    params = { "ssid": "test-wpa2-psk-pmf",
               "wpa_passphrase": "12345678",
               "wpa": "2",
               "ieee80211w": "2",
               "wpa_key_mgmt": "WPA-PSK-SHA256",
               "rsn_pairwise": "CCMP",
               "group_mgmt_cipher": cipher }
    hapd = hostapd.add_ap(ap['ifname'], params)
    dev.connect("test-wpa2-psk-pmf", psk="12345678", ieee80211w="2",
                key_mgmt="WPA-PSK-SHA256",
                pairwise="CCMP", group="CCMP", scan_freq="2412")
    hwsim_utils.test_connectivity(dev, hapd)
    hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff")
    dev.wait_disconnected()
    if wt.get_bss_counter('valid_bip_mmie', ap['bssid']) < 1:
        raise Exception("No valid BIP MMIE seen")
    if wt.get_bss_counter('bip_deauth', ap['bssid']) < 1:
        raise Exception("No valid BIP deauth seen")

    if cipher == "AES-128-CMAC":
        group_mgmt = "BIP"
    else:
        group_mgmt = cipher
    res =  wt.info_bss('group_mgmt', ap['bssid']).strip()
    if res != group_mgmt:
        raise Exception("Unexpected group mgmt cipher: " + res)
コード例 #5
0
ファイル: test_ap_pmf.py プロジェクト: AlejandroAbad/hostap
def test_ap_pmf_required(dev, apdev):
    """WPA2-PSK AP with PMF required"""
    ssid = "test-pmf-required"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
    params["ieee80211w"] = "2";
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
    key_mgmt = hapd.get_config()['key_mgmt']
    if key_mgmt.split(' ')[0] != "WPA-PSK-SHA256":
        raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
    dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[1].ifname, apdev[0]['ifname'])
    hapd = hostapd.Hostapd(apdev[0]['ifname'])
    hapd.request("SA_QUERY " + dev[0].p2p_interface_addr())
    hapd.request("SA_QUERY " + dev[1].p2p_interface_addr())
    wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
    wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
    wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[1].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
コード例 #6
0
ファイル: test_ap_pmf.py プロジェクト: greearb/hostap-ct
def test_ocv_sa_query(dev, apdev):
    """Test SA Query with OCV"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["ocv"] = "1"
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception as e:
        if "Failed to set hostapd parameter ocv" in str(e):
            raise HwsimSkip("OCV not supported")
        raise
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    # Test that client can handle SA Query with OCI element
    if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
        raise Exception("SA_QUERY failed")
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].own_addr()) < 1:
        raise Exception("STA did not reply to SA Query")

    # Test that AP can handle SA Query with OCI element
    if "OK" not in dev[0].request("UNPROT_DEAUTH"):
        raise Exception("Triggering SA Query from the STA failed")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
    if ev is not None:
        raise Exception("SA Query from the STA failed")
コード例 #7
0
ファイル: test_ap_ciphers.py プロジェクト: janetuk/mech_eap
def test_ap_wpa2_delayed_m1_m3_zero_tk(dev, apdev):
    """Delayed M1+M3 retransmission and zero TK"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    hwsim_utils.test_connectivity(dev[0], hapd)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M1 " + addr):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M3 " + addr):
        raise Exception("RESEND_M3 failed")

    if "OK" not in hapd.request("SET_KEY 3 %s %d %d %s %s" % (addr, 0, 1, 6*"00", 16*"00")):
        raise Exception("SET_KEY failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1, broadcast=False,
                                  success_expected=False)
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected()
コード例 #8
0
ファイル: test_ap_pmf.py プロジェクト: greearb/hostap-ct
def test_ocv_sa_query_csa(dev, apdev):
    """Test SA Query with OCV after channel switch"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["ocv"] = "1"
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception as e:
        if "Failed to set hostapd parameter ocv" in str(e):
            raise HwsimSkip("OCV not supported")
        raise
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    hapd.request("CHAN_SWITCH 5 2437")
    time.sleep(1)
    if wt.get_sta_counter("valid_saqueryreq_tx", apdev[0]['bssid'],
                          dev[0].own_addr()) < 1:
        raise Exception("STA did not start SA Query after channel switch")
コード例 #9
0
ファイル: test_ap_pmf.py プロジェクト: aelarabawy/hostap
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
    """WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
    ssid = "deauth-attack"
    addr = dev[0].p2p_dev_addr()
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="use_monitor=1")
    id = wpas.add_network()
    wpas.set_network(id, "mode", "2")
    wpas.set_network_quoted(id, "ssid", ssid)
    wpas.set_network(id, "proto", "WPA2")
    wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
    wpas.set_network(id, "ieee80211w", "2")
    wpas.set_network_quoted(id, "psk", "12345678")
    wpas.set_network(id, "pairwise", "CCMP")
    wpas.set_network(id, "group", "CCMP")
    wpas.set_network(id, "frequency", "2412")
    wpas.connect_network(id)
    bssid = wpas.p2p_dev_addr()

    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    for i in range(0, 10):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req < 1:
        raise Exception("STA did not send SA Query")
    if num_resp < 1:
        raise Exception("AP did not reply to SA Query")
    if num_req > 1:
        raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)

    time.sleep(10)
    for i in range(0, 5):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req != 2 or num_resp != 2:
        raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))
コード例 #10
0
ファイル: test_p2p_autogo.py プロジェクト: gxk/hostap
def test_autogo_tdls(dev):
    """P2P autonomous GO and two clients using TDLS"""
    go = dev[0]
    logger.info("Start autonomous GO with fixed parameters " + go.ifname)
    id = go.add_network()
    go.set_network_quoted(id, "ssid", "DIRECT-tdls")
    go.set_network_quoted(id, "psk", "12345678")
    go.set_network(id, "mode", "3")
    go.set_network(id, "disabled", "2")
    res = go.p2p_start_go(persistent=id, freq="2462")
    logger.debug("res: " + str(res))
    Wlantest.setup(go, True)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    connect_cli(go, dev[1], social=True, freq=2462)
    connect_cli(go, dev[2], social=True, freq=2462)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    bssid = dev[0].p2p_interface_addr()
    addr1 = dev[1].p2p_interface_addr()
    addr2 = dev[2].p2p_interface_addr()
    dev[1].tdls_setup(addr2)
    time.sleep(1)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr1, addr2)
    if conf == 0:
        raise Exception("No TDLS Setup Confirm (success) seen")
    dl = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2)
    if dl == 0:
        raise Exception("No valid frames through direct link")
    wt.tdls_clear(bssid, addr1, addr2)
    dev[1].tdls_teardown(addr2)
    time.sleep(1)
    teardown = wt.get_tdls_counter("teardown", bssid, addr1, addr2)
    if teardown == 0:
        raise Exception("No TDLS Setup Teardown seen")
    wt.tdls_clear(bssid, addr1, addr2)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    ap_path = wt.get_tdls_counter("valid_ap_path", bssid, addr1, addr2)
    if ap_path == 0:
        raise Exception("No valid frames via AP path")
    direct_link = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2)
    if direct_link > 0:
        raise Exception("Unexpected frames through direct link")
    idirect_link = wt.get_tdls_counter("invalid_direct_link", bssid, addr1,
                                       addr2)
    if idirect_link > 0:
        raise Exception("Unexpected frames through direct link (invalid)")
    dev[2].remove_group()
    dev[1].remove_group()
    dev[0].remove_group()
コード例 #11
0
ファイル: test_ap_ciphers.py プロジェクト: janetuk/mech_eap
def run_ap_wpa2_delayed_m1_m3_retransmission(dev, apdev,
                                             change_m1_anonce=False):
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    phy = dev[0].get_driver_status_field("phyname")
    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    for i in range(5):
        hwsim_utils.test_connectivity(dev[0], hapd)

    time.sleep(0.1)
    before_tk = get_rx_spec(phy, gtk=False).splitlines()
    before_gtk = get_rx_spec(phy, gtk=True).splitlines()
    addr = dev[0].own_addr()
    if change_m1_anonce:
        if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
            raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M1 " + addr):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M3 " + addr):
        raise Exception("RESEND_M3 failed")
    time.sleep(0.1)
    after_tk = get_rx_spec(phy, gtk=False).splitlines()
    after_gtk = get_rx_spec(phy, gtk=True).splitlines()

    if "OK" not in hapd.request("RESET_PN " + addr):
        raise Exception("RESET_PN failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1,
                                  success_expected=False)
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected()

    for i in range(len(before_tk)):
        b = int(before_tk[i], 16)
        a = int(after_tk[i], 16)
        if a < b:
            raise Exception("TK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))

    for i in range(len(before_gtk)):
        b = int(before_gtk[i], 16)
        a = int(after_gtk[i], 16)
        if a < b:
            raise Exception("GTK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))
コード例 #12
0
ファイル: test_ap_pmf.py プロジェクト: PavanKulk/codebase
def test_ap_pmf_sta_sa_query(dev, apdev):
    """WPA2-PSK AP with station using SA Query"""
    ssid = "assoc-comeback"
    addr = dev[0].own_addr()
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="use_monitor=1")
    id = wpas.add_network()
    wpas.set_network(id, "mode", "2")
    wpas.set_network_quoted(id, "ssid", ssid)
    wpas.set_network(id, "proto", "WPA2")
    wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
    wpas.set_network(id, "ieee80211w", "2")
    wpas.set_network_quoted(id, "psk", "12345678")
    wpas.set_network(id, "pairwise", "CCMP")
    wpas.set_network(id, "group", "CCMP")
    wpas.set_network(id, "frequency", "2412")
    wpas.connect_network(id)
    bssid = wpas.own_addr()
    wpas.dump_monitor()

    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    wpas.dump_monitor()
    wpas.request("DEAUTHENTICATE " + addr + " test=0")
    wpas.dump_monitor()
    wpas.request("DISASSOCIATE " + addr + " test=0")
    wpas.dump_monitor()
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")

    wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
    wpas.dump_monitor()
    wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    wpas.dump_monitor()
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    if wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr) < 1:
        raise Exception("STA did not send SA Query")
    if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) < 1:
        raise Exception("AP did not reply to SA Query")
    wpas.dump_monitor()
コード例 #13
0
ファイル: test_ap_pmf.py プロジェクト: NS-K/hostapd
def _test_ap_pmf_toggle(dev, apdev):
    ssid = "test-pmf-optional"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK";
    params["ieee80211w"] = "1";
    params["assoc_sa_query_max_timeout"] = "1"
    params["assoc_sa_query_retry_timeout"] = "1"
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
    bssid = apdev[0]['bssid']
    addr = dev[0].own_addr()
    dev[0].request("SET reassoc_same_bss_optim 1")
    id = dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                        key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                        scan_freq="2412")
    wt.require_ap_pmf_optional(bssid)
    wt.require_sta_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' not in sta['flags']:
        raise Exception("MFP flag not present for STA")

    dev[0].set_network(id, "ieee80211w", "0")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected()
    wt.require_sta_no_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' in sta['flags']:
        raise Exception("MFP flag unexpectedly present for STA")
    cmd = subprocess.Popen(['iw', 'dev', apdev[0]['ifname'], 'station', 'get',
                            addr], stdout=subprocess.PIPE)
    (data,err) = cmd.communicate()
    if "yes" in [l for l in data.splitlines() if "MFP" in l][0]:
        raise Exception("Kernel STA entry had MFP enabled")

    dev[0].set_network(id, "ieee80211w", "1")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected()
    wt.require_sta_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' not in sta['flags']:
        raise Exception("MFP flag not present for STA")
    cmd = subprocess.Popen(['iw', 'dev', apdev[0]['ifname'], 'station', 'get',
                            addr], stdout=subprocess.PIPE)
    (data,err) = cmd.communicate()
    if "yes" not in [l for l in data.splitlines() if "MFP" in l][0]:
        raise Exception("Kernel STA entry did not have MFP enabled")
def test_ap_pmf_negative(dev, apdev):
    """WPA2-PSK AP without PMF (negative test)"""
    ssid = "test-pmf-negative"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    hostapd.add_ap(apdev[0]['ifname'], params)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2")
    hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
    try:
        dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                       key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2")
        hwsim_utils.test_connectivity(dev[1].ifname, apdev[0]['ifname'])
        raise Exception("PMF required STA connected to no PMF AP")
    except Exception, e:
        logger.debug("Ignore expected exception: " + str(e))
コード例 #15
0
ファイル: test_wnm.py プロジェクト: aelarabawy/hostap
def test_wnm_sleep_mode_rsn_pmf(dev, apdev):
    """WNM Sleep Mode - RSN with PMF"""
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
    params["ieee80211w"] = "2";
    params["time_advertisement"] = "2"
    params["time_zone"] = "EST5"
    params["wnm_sleep_mode"] = "1"
    params["bss_transition"] = "1"
    hostapd.add_ap(apdev[0]['ifname'], params)
    hapd = hostapd.Hostapd(apdev[0]['ifname'])

    dev[0].connect("test-wnm-rsn", psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK-SHA256", proto="WPA2", scan_freq="2412")
    check_wnm_sleep_mode_enter_exit(hapd, dev[0])
コード例 #16
0
ファイル: test_ap_pmf.py プロジェクト: aelarabawy/hostap
def test_ap_pmf_required_sha1(dev, apdev):
    """WPA2-PSK AP with PMF required with SHA1 AKM"""
    ssid = "test-pmf-required-sha1"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK";
    params["ieee80211w"] = "2";
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
    key_mgmt = hapd.get_config()['key_mgmt']
    if key_mgmt.split(' ')[0] != "WPA-PSK":
        raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
    dev[0].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
    if "[WPA2-PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
        raise Exception("Scan results missing RSN element info")
    hwsim_utils.test_connectivity(dev[0], hapd)
コード例 #17
0
ファイル: test_ap_pmf.py プロジェクト: NS-K/hostapd
def test_ap_pmf_assoc_comeback2(dev, apdev):
    """WPA2-PSK AP with PMF association comeback (using DROP_SA)"""
    ssid = "assoc-comeback"
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK";
    params["ieee80211w"] = "1";
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
    dev[0].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
    if "OK" not in dev[0].request("DROP_SA"):
        raise Exception("DROP_SA failed")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected(timeout=10, error="Timeout on re-connection")
    if wt.get_sta_counter("reassocresp_comeback", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("AP did not use reassociation comeback request")
コード例 #18
0
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
    """WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
    ssid = "deauth-attack"
    addr = dev[0].own_addr()

    wpas = start_wpas_ap(ssid)
    bssid = wpas.own_addr()

    Wlantest.setup(wpas)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    for i in range(0, 10):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req < 1:
        raise Exception("STA did not send SA Query")
    if num_resp < 1:
        raise Exception("AP did not reply to SA Query")
    if num_req > 1:
        raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)

    time.sleep(10)
    for i in range(0, 5):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req != 2 or num_resp != 2:
        raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))
コード例 #19
0
ファイル: test_peerkey.py プロジェクト: gxk/hostap
def test_peerkey_sniffer_check(dev, apdev, params):
    """RSN AP and PeerKey between two STAs with sniffer check"""
    ssid = "test-peerkey"
    passphrase = "12345678"
    hparams = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
    hparams['peerkey'] = "1"
    hapd = hostapd.add_ap(apdev[0], hparams)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    hwsim_utils.test_connectivity_sta(dev[0], dev[1])

    dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
    time.sleep(1)
    # NOTE: Actual use of the direct link (DLS) is not supported in
    # mac80211_hwsim, so this operation fails at setting the keys after
    # successfully completed 4-way handshake. This test case does allow the
    # key negotiation part to be tested for coverage, though. Use sniffer to
    # verify that all the SMK and STK handshake messages were transmitted.

    bssid = hapd.own_addr()
    addr0 = dev[0].own_addr()
    addr1 = dev[1].own_addr()

    # Wireshark renamed the EAPOL-Key key_info field, so need to try both the
    # new and the old name to work with both versions.
    try_other = False
    try:
        out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
                         "eapol.type == 3",
                         display=["wlan.sa", "wlan.da",
                                  "wlan_rsna_eapol.keydes.key_info"])
    except Exception, e:
        if "Unknown tshark field" in str(e):
            try_other = True
            pass
        else:
            raise
コード例 #20
0
ファイル: test_ap_ciphers.py プロジェクト: janetuk/mech_eap
def test_ap_wpa2_plaintext_group_m1(dev, apdev):
    """Plaintext group M1"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    time.sleep(0.1)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr + " plaintext"):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.2)
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.1)
コード例 #21
0
ファイル: test_ap_ciphers.py プロジェクト: janetuk/mech_eap
def run_ap_cipher_replay_protection_sta(dev, apdev, cipher, gtk=False):
    params = { "ssid": "test-wpa2-psk",
               "wpa_passphrase": "12345678",
               "wpa": "2",
               "wpa_key_mgmt": "WPA-PSK",
               "rsn_pairwise": cipher }
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    phy = dev[0].get_driver_status_field("phyname")
    dev[0].connect("test-wpa2-psk", psk="12345678",
                   pairwise=cipher, group=cipher, scan_freq="2412")

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, gtk)
        if replays != 0:
            raise Exception("Unexpected replay reported (1)")

    for i in range(5):
        hwsim_utils.test_connectivity(dev[0], hapd)

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, gtk)
        if replays != 0:
            raise Exception("Unexpected replay reported (2)")

    addr = "ff:ff:ff:ff:ff:ff" if gtk else dev[0].own_addr()
    if "OK" not in hapd.request("RESET_PN " + addr):
        raise Exception("RESET_PN failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1,
                                  success_expected=False)

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, gtk)
        if replays < 1:
            raise Exception("Replays not reported")
コード例 #22
0
ファイル: test_ap_pmf.py プロジェクト: gxk/hostap
def test_ap_pmf_required(dev, apdev):
    """WPA2-PSK AP with PMF required"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    key_mgmt = hapd.get_config()['key_mgmt']
    if key_mgmt.split(' ')[0] != "WPA-PSK-SHA256":
        raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    if "[WPA2-PSK-SHA256-CCMP]" not in dev[0].request("SCAN_RESULTS"):
        raise Exception("Scan results missing RSN element info")
    hwsim_utils.test_connectivity(dev[0], hapd)
    dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[1], hapd)
    if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
        raise Exception("SA_QUERY failed")
    if "OK" not in hapd.request("SA_QUERY " + dev[1].own_addr()):
        raise Exception("SA_QUERY failed")
    if "FAIL" not in hapd.request("SA_QUERY foo"):
        raise Exception("Invalid SA_QUERY accepted")
    wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
    wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
    wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[1].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
コード例 #23
0
ファイル: test_ap_ciphers.py プロジェクト: janetuk/mech_eap
def test_ap_wpa2_plaintext_m1_m3_pmf(dev, apdev):
    """Plaintext M1/M3 during PTK rekey (PMF)"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk", psk="12345678", ieee80211w="2",
                   scan_freq="2412")

    time.sleep(0.1)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_M1 " + addr + " plaintext"):
        raise Exception("RESEND_M1 failed")
    time.sleep(0.1)
    if "OK" not in hapd.request("RESEND_M3 " + addr + " plaintext"):
        raise Exception("RESEND_M3 failed")
    time.sleep(0.1)
コード例 #24
0
def test_ap_pmf_sta_sa_query(dev, apdev):
    """WPA2-PSK AP with station using SA Query"""
    ssid = "assoc-comeback"
    addr = dev[0].own_addr()

    wpas = start_wpas_ap(ssid)
    bssid = wpas.own_addr()

    Wlantest.setup(wpas)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    wpas.dump_monitor()
    wpas.request("DEAUTHENTICATE " + addr + " test=0")
    wpas.dump_monitor()
    wpas.request("DISASSOCIATE " + addr + " test=0")
    wpas.dump_monitor()
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")

    wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
    wpas.dump_monitor()
    wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    wpas.dump_monitor()
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    if wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr) < 1:
        raise Exception("STA did not send SA Query")
    if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) < 1:
        raise Exception("AP did not reply to SA Query")
    wpas.dump_monitor()
コード例 #25
0
ファイル: test_ap_pmf.py プロジェクト: swathiramya/hostapd
def test_ap_pmf_assoc_comeback2(dev, apdev):
    """WPA2-PSK AP with PMF association comeback (using DROP_SA)"""
    ssid = "assoc-comeback"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK"
    params["ieee80211w"] = "1"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="2",
                   key_mgmt="WPA-PSK",
                   proto="WPA2",
                   scan_freq="2412")
    if "OK" not in dev[0].request("DROP_SA"):
        raise Exception("DROP_SA failed")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected(timeout=10, error="Timeout on re-connection")
    if wt.get_sta_counter("reassocresp_comeback", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("AP did not use reassociation comeback request")
コード例 #26
0
ファイル: test_ap_pmf.py プロジェクト: ptxuliang/QCA_Tool
def test_ap_pmf_ap_dropping_sa(dev, apdev):
    """WPA2-PSK PMF AP dropping SA"""
    ssid = "pmf"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)
    bssid = hapd.own_addr()
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="2",
                   key_mgmt="WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")
    addr0 = dev[0].own_addr()
    dev[0].dump_monitor()
    hapd.wait_sta()
    # Drop SA and association at the AP locally without notifying the STA. This
    # results in the STA getting unprotected Deauthentication frames when trying
    # to transmit the next Class 3 frame.
    if "OK" not in hapd.request("DEAUTHENTICATE " + addr0 + " tx=0"):
        raise Exception("DEAUTHENTICATE command failed")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception(
            "Unexpected disconnection event after DEAUTHENTICATE tx=0: " + ev)
    dev[0].request("DATA_TEST_CONFIG 1")
    dev[0].request("DATA_TEST_TX " + bssid + " " + addr0)
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
    dev[0].request("DATA_TEST_CONFIG 0")
    if ev is None or "locally_generated=1" not in ev:
        raise Exception("Locally generated disconnection not reported")
コード例 #27
0
ファイル: test_ap_pmf.py プロジェクト: ptxuliang/QCA_Tool
def run_ap_pmf_valid(dev, apdev, disassociate, broadcast):
    ssid = "pmf"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)
    bssid = hapd.own_addr()
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="2",
                   key_mgmt="WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")
    addr0 = dev[0].own_addr()
    dev[0].dump_monitor()
    hapd.wait_sta()
    cmd = "DISASSOCIATE " if disassociate else "DEAUTHENTICATE "
    cmd += "ff:ff:ff:ff:ff:ff" if broadcast else addr0
    cmd += " test=1"
    if "OK" not in hapd.request(cmd):
        raise Exception("hostapd command failed")
    sta = hapd.get_sta(addr0)
    if not sta:
        raise Exception("STA entry lost")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
    if ev is None:
        raise Exception("Disconnection not reported")
    if "locally_generated=1" in ev:
        raise Exception("Unexpected locally generated disconnection")

    # Wait for SA Query procedure to fail and association comeback to succeed
    dev[0].wait_connected()
コード例 #28
0
def run_ap_wpa2_delayed_group_m1_retransmission(dev, apdev):
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    phy = dev[0].get_driver_status_field("phyname")
    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    for i in range(5):
        hwsim_utils.test_connectivity(dev[0], hapd)

    time.sleep(0.1)
    before = get_rx_spec(phy, gtk=True).splitlines()
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.1)
    after = get_rx_spec(phy, gtk=True).splitlines()

    if "OK" not in hapd.request("RESET_PN " + addr):
        raise Exception("RESET_PN failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1,
                                  success_expected=False)
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected()

    for i in range(len(before)):
        b = int(before[i], 16)
        a = int(after[i], 16)
        if a < b:
            raise Exception("RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))
コード例 #29
0
ファイル: test_ap_ciphers.py プロジェクト: blogic/hostapd-1
def check_group_mgmt_cipher(dev, ap, cipher, sta_req_cipher=None):
    if cipher not in dev.get_capability("group_mgmt"):
        raise HwsimSkip("Cipher %s not supported" % cipher)
    params = {"ssid": "test-wpa2-psk-pmf",
              "wpa_passphrase": "12345678",
              "wpa": "2",
              "ieee80211w": "2",
              "wpa_key_mgmt": "WPA-PSK-SHA256",
              "rsn_pairwise": "CCMP",
              "group_mgmt_cipher": cipher}
    hapd = hostapd.add_ap(ap, params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev.connect("test-wpa2-psk-pmf", psk="12345678", ieee80211w="2",
                key_mgmt="WPA-PSK-SHA256", group_mgmt=sta_req_cipher,
                pairwise="CCMP", group="CCMP", scan_freq="2412")
    hapd.wait_sta()
    hwsim_utils.test_connectivity(dev, hapd)
    hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff")
    dev.wait_disconnected()
    if wt.get_bss_counter('valid_bip_mmie', ap['bssid']) < 1:
        raise Exception("No valid BIP MMIE seen")
    if wt.get_bss_counter('bip_deauth', ap['bssid']) < 1:
        raise Exception("No valid BIP deauth seen")

    if cipher == "AES-128-CMAC":
        group_mgmt = "BIP"
    else:
        group_mgmt = cipher
    res = wt.info_bss('group_mgmt', ap['bssid']).strip()
    if res != group_mgmt:
        raise Exception("Unexpected group mgmt cipher: " + res)
コード例 #30
0
def test_ap_pmf_required(dev, apdev):
    """WPA2-PSK AP with PMF required"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
    params["ieee80211w"] = "2";
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    key_mgmt = hapd.get_config()['key_mgmt']
    if key_mgmt.split(' ')[0] != "WPA-PSK-SHA256":
        raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    if "[WPA2-PSK-SHA256-CCMP]" not in dev[0].request("SCAN_RESULTS"):
        raise Exception("Scan results missing RSN element info")
    hwsim_utils.test_connectivity(dev[0], hapd)
    dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[1], hapd)
    hapd.request("SA_QUERY " + dev[0].p2p_interface_addr())
    hapd.request("SA_QUERY " + dev[1].p2p_interface_addr())
    wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
    wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
    wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[1].p2p_interface_addr()) < 1:
        raise Exception("STA did not reply to SA Query")
コード例 #31
0
def test_ap_wpa2_plaintext_group_m1_pmf(dev, apdev):
    """Plaintext group M1 (PMF)"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk",
                   psk="12345678",
                   ieee80211w="2",
                   scan_freq="2412")

    time.sleep(0.1)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr + " plaintext"):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.2)
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.1)
コード例 #32
0
ファイル: test_ap_pmf.py プロジェクト: blogic/hostapd-1
def test_ap_pmf_sta_sa_query_no_response_hostapd(dev, apdev):
    """WPA2-PSK AP with station using SA Query and getting no response (hostapd)"""
    ssid = "assoc-comeback"
    passphrase = "12345678"
    addr = dev[0].own_addr()

    params = hostapd.wpa2_params(ssid=ssid,
                                 passphrase=passphrase,
                                 wpa_key_mgmt="WPA-PSK-SHA256",
                                 ieee80211w="2")
    hapd = hostapd.add_ap(apdev[0], params)
    bssid = hapd.own_addr()

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid,
                   psk=passphrase,
                   ieee80211w="2",
                   key_mgmt="WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")
    hapd.wait_sta()
    hapd.set("ext_mgmt_frame_handling", "1")
    if "OK" not in hapd.request("DEAUTHENTICATE " + addr + " reason=6 test=0") or \
       "OK" not in hapd.request("DISASSOCIATE " + addr + " reason=7 test=0"):
        raise Exception("Failed to send unprotected disconnection messages")
    dev[0].wait_disconnected()
    hapd.set("ext_mgmt_frame_handling", "0")
    if wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr) < 1:
        raise Exception("STA did not send SA Query")
    if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) > 0:
        raise Exception("AP replied to SA Query")
    dev[0].wait_connected()
コード例 #33
0
ファイル: test_ap_pmf.py プロジェクト: ptxuliang/QCA_Tool
def run_ap_pmf_beacon_protection(dev, apdev, cipher):
    ssid = "test-beacon-prot"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["beacon_prot"] = "1"
    params["group_mgmt_cipher"] = cipher
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception as e:
        if "Failed to enable hostapd interface" in str(e):
            raise HwsimSkip("Beacon protection not supported")
        raise

    bssid = hapd.own_addr()

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    # STA with Beacon protection enabled
    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="2",
                   beacon_prot="1",
                   key_mgmt="WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")

    # STA with Beacon protection disabled
    dev[1].connect(ssid,
                   psk="12345678",
                   ieee80211w="2",
                   key_mgmt="WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")

    time.sleep(1)

    sta_key = None
    ap_key = None

    phy = dev[0].get_driver_status_field("phyname")
    keys = "/sys/kernel/debug/ieee80211/%s/keys" % phy
    try:
        for key in os.listdir(keys):
            keydir = os.path.join(keys, key)
            vals = mac80211_read_key(keydir)
            keyidx = int(vals['keyidx'])
            if keyidx == 6 or keyidx == 7:
                sta_key = vals
                break
    except OSError as e:
        raise HwsimSkip("debugfs not supported in mac80211 (STA)")

    phy = hapd.get_driver_status_field("phyname")
    keys = "/sys/kernel/debug/ieee80211/%s/keys" % phy
    try:
        for key in os.listdir(keys):
            keydir = os.path.join(keys, key)
            vals = mac80211_read_key(keydir)
            keyidx = int(vals['keyidx'])
            if keyidx == 6 or keyidx == 7:
                ap_key = vals
                break
    except OSError as e:
        raise HwsimSkip("debugfs not supported in mac80211 (AP)")

    if not sta_key:
        raise Exception("Could not find STA key information from debugfs")
    logger.info("STA key: " + str(sta_key))

    if not ap_key:
        raise Exception("Could not find AP key information from debugfs")
    logger.info("AP key: " + str(ap_key))

    if sta_key['key'] != ap_key['key']:
        raise Exception("AP and STA BIGTK mismatch")

    if sta_key['keyidx'] != ap_key['keyidx']:
        raise Exception("AP and STA BIGTK keyidx mismatch")

    if sta_key['algorithm'] != ap_key['algorithm']:
        raise Exception("AP and STA BIGTK algorithm mismatch")

    replays = int(sta_key['replays'])
    icverrors = int(sta_key['icverrors'])
    if replays > 0 or icverrors > 0:
        raise Exception(
            "STA reported errors: replays=%d icverrors=%d" % replays,
            icverrors)

    rx_spec = int(sta_key['rx_spec'], base=16)
    if rx_spec < 3:
        raise Exception(
            "STA did not update BIGTK receive counter sufficiently")

    tx_spec = int(ap_key['tx_spec'], base=16)
    if tx_spec < 3:
        raise Exception("AP did not update BIGTK BIPN sufficiently")

    valid_bip = wt.get_bss_counter('valid_bip_mmie', bssid)
    invalid_bip = wt.get_bss_counter('invalid_bip_mmie', bssid)
    missing_bip = wt.get_bss_counter('missing_bip_mmie', bssid)
    logger.info("wlantest BIP counters: valid=%d invalid=%d missing=%d" %
                (valid_bip, invalid_bip, missing_bip))
    if valid_bip < 0 or invalid_bip > 0 or missing_bip > 0:
        raise Exception(
            "Unexpected wlantest BIP counters: valid=%d invalid=%d missing=%d"
            % (valid_bip, invalid_bip, missing_bip))
コード例 #34
0
ファイル: test_ap_ciphers.py プロジェクト: cschuber/hostap
def run_ap_cipher_replay_protection_sta(dev, apdev, cipher, keytype=KT_PTK):
    params = {
        "ssid": "test-wpa2-psk",
        "wpa_passphrase": "12345678",
        "wpa": "2",
        "wpa_key_mgmt": "WPA-PSK",
        "rsn_pairwise": cipher
    }
    if keytype == KT_IGTK or keytype == KT_BIGTK:
        params['ieee80211w'] = '2'
    if keytype == KT_BIGTK:
        params['beacon_prot'] = '1'
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    phy = dev[0].get_driver_status_field("phyname")
    dev[0].connect("test-wpa2-psk",
                   psk="12345678",
                   ieee80211w='1',
                   beacon_prot='1',
                   pairwise=cipher,
                   group=cipher,
                   scan_freq="2412")
    hapd.wait_sta()

    if keytype == KT_BIGTK:
        time.sleep(1)

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, keytype)
        if replays != 0:
            raise Exception("Unexpected replay reported (1)")

    for i in range(5):
        hwsim_utils.test_connectivity(dev[0], hapd)

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, keytype)
        if replays != 0:
            raise Exception("Unexpected replay reported (2)")

    if keytype == KT_IGTK:
        hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff test=1")
        ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
        if ev:
            dev[0].wait_connected()

    addr = "ff:ff:ff:ff:ff:ff" if keytype != KT_PTK else dev[0].own_addr()
    cmd = "RESET_PN " + addr
    if keytype == KT_IGTK:
        cmd += " IGTK"
    if keytype == KT_BIGTK:
        cmd += " BIGTK"
    if "OK" not in hapd.request(cmd):
        raise Exception("RESET_PN failed")
    time.sleep(0.1)
    if keytype == KT_IGTK:
        hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff test=1")
        ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    elif keytype == KT_BIGTK:
        time.sleep(1)
    else:
        hwsim_utils.test_connectivity(dev[0],
                                      hapd,
                                      timeout=1,
                                      success_expected=False)

    if cipher != "TKIP":
        replays = get_tk_replay_counter(phy, keytype)
        if replays < 1:
            raise Exception("Replays not reported")
コード例 #35
0
def test_ap_interworking_scan_filtering(dev, apdev):
    """Interworking scan filtering with HESSID and access network type"""
    bssid = apdev[0]['bssid']
    params = hs20_ap_params()
    ssid = "test-hs20-ap1"
    params['ssid'] = ssid
    params['hessid'] = bssid
    hostapd.add_ap(apdev[0]['ifname'], params)

    bssid2 = apdev[1]['bssid']
    params = hs20_ap_params()
    ssid2 = "test-hs20-ap2"
    params['ssid'] = ssid2
    params['hessid'] = bssid2
    params['access_network_type'] = "1"
    del params['venue_group']
    del params['venue_type']
    hostapd.add_ap(apdev[1]['ifname'], params)

    dev[0].hs20_enable()

    wt = Wlantest()
    wt.flush()

    logger.info("Check probe request filtering based on HESSID")

    dev[0].request("SET hessid " + bssid2)
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid, bssid2)

    logger.info("Check probe request filtering based on access network type")

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid 00:00:00:00:00:00")
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid2, bssid)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid 00:00:00:00:00:00")
    dev[0].request("SET access_network_type 1")
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid, bssid2)

    logger.info("Check probe request filtering based on HESSID and ANT")

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid)
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid2, bssid)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid2)
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid, None)
    check_probe_resp(wt, bssid2, None)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid)
    dev[0].request("SET access_network_type 1")
    dev[0].scan(freq="2412")
    time.sleep(0.03)
    check_probe_resp(wt, bssid, None)
    check_probe_resp(wt, bssid2, None)
コード例 #36
0
ファイル: test_ap_pmf.py プロジェクト: SKKU-ESLAB/ant-hostap
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
    """WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
    ssid = "deauth-attack"
    addr = dev[0].own_addr()

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="use_monitor=1")
    id = wpas.add_network()
    wpas.set_network(id, "mode", "2")
    wpas.set_network_quoted(id, "ssid", ssid)
    wpas.set_network(id, "proto", "WPA2")
    wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
    wpas.set_network(id, "ieee80211w", "2")
    wpas.set_network_quoted(id, "psk", "12345678")
    wpas.set_network(id, "pairwise", "CCMP")
    wpas.set_network(id, "group", "CCMP")
    wpas.set_network(id, "frequency", "2412")
    wpas.connect_network(id)
    bssid = wpas.own_addr()

    Wlantest.setup(wpas)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")

    for i in range(0, 10):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req < 1:
        raise Exception("STA did not send SA Query")
    if num_resp < 1:
        raise Exception("AP did not reply to SA Query")
    if num_req > 1:
        raise Exception("STA initiated too many SA Query procedures (%d)" %
                        num_req)

    time.sleep(10)
    for i in range(0, 5):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req != 2 or num_resp != 2:
        raise Exception(
            "Unexpected number of SA Query procedures (req=%d resp=%d)" %
            (num_req, num_resp))
コード例 #37
0
ファイル: test_ap_hs20.py プロジェクト: jmalinen/hostap
def test_ap_interworking_scan_filtering(dev, apdev):
    """Interworking scan filtering with HESSID and access network type"""
    bssid = apdev[0]['bssid']
    params = hs20_ap_params()
    ssid = "test-hs20-ap1"
    params['ssid'] = ssid
    params['hessid'] = bssid
    hostapd.add_ap(apdev[0]['ifname'], params)

    bssid2 = apdev[1]['bssid']
    params = hs20_ap_params()
    ssid2 = "test-hs20-ap2"
    params['ssid'] = ssid2
    params['hessid'] = bssid2
    params['access_network_type'] = "1"
    del params['venue_group']
    del params['venue_type']
    hostapd.add_ap(apdev[1]['ifname'], params)

    dev[0].hs20_enable()

    wt = Wlantest()
    wt.flush()

    logger.info("Check probe request filtering based on HESSID")

    dev[0].request("SET hessid " + bssid2)
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid, bssid2)

    logger.info("Check probe request filtering based on access network type")

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid 00:00:00:00:00:00")
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid2, bssid)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid 00:00:00:00:00:00")
    dev[0].request("SET access_network_type 1")
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid, bssid2)

    logger.info("Check probe request filtering based on HESSID and ANT")

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid)
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid2, bssid)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid2)
    dev[0].request("SET access_network_type 14")
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid, None)
    check_probe_resp(wt, bssid2, None)

    wt.clear_bss_counters(bssid)
    wt.clear_bss_counters(bssid2)
    dev[0].request("SET hessid " + bssid)
    dev[0].request("SET access_network_type 1")
    dev[0].scan(freq="2412")
    check_probe_resp(wt, bssid, None)
    check_probe_resp(wt, bssid2, None)
コード例 #38
0
def test_ocv_sa_query(dev, apdev):
    """Test SA Query with OCV"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["ocv"] = "1"
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception, e:
        if "Failed to set hostapd parameter ocv" in str(e):
            raise HwsimSkip("OCV not supported")
        raise
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid,
                   psk="12345678",
                   ieee80211w="1",
                   ocv="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256",
                   proto="WPA2",
                   scan_freq="2412")

    # Test that client can handle SA Query with OCI element
    if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
        raise Exception("SA_QUERY failed")
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].own_addr()) < 1:
コード例 #39
0
ファイル: test_ap_tdls.py プロジェクト: gxk/hostap
def wlantest_setup(hapd):
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    wt.add_wepkey("68656c6c6f")
コード例 #40
0
ファイル: test_ap_tdls.py プロジェクト: dcaratti/hostap-ctest
def wlantest_setup(hapd):
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    wt.add_wepkey("68656c6c6f")
コード例 #41
0
def test_peerkey_sniffer_check(dev, apdev, params):
    """RSN AP and PeerKey between two STAs with sniffer check"""
    ssid = "test-peerkey"
    passphrase = "12345678"
    hparams = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
    hparams['peerkey'] = "1"
    hapd = hostapd.add_ap(apdev[0], hparams)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    hwsim_utils.test_connectivity_sta(dev[0], dev[1])

    dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
    time.sleep(1)
    # NOTE: Actual use of the direct link (DLS) is not supported in
    # mac80211_hwsim, so this operation fails at setting the keys after
    # successfully completed 4-way handshake. This test case does allow the
    # key negotiation part to be tested for coverage, though. Use sniffer to
    # verify that all the SMK and STK handshake messages were transmitted.

    bssid = hapd.own_addr()
    addr0 = dev[0].own_addr()
    addr1 = dev[1].own_addr()

    out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
                     "eapol.type == 3",
                     display=["wlan.sa", "wlan.da", "eapol.keydes.key_info"])

    smk = [ False, False, False, False, False ]
    stk = [ False, False, False, False ]

    for pkt in out.splitlines():
        sa, da, key_info = pkt.split('\t')
        key_info = int(key_info, 16)
        if sa == addr0 and da == bssid and key_info == 0x2b02:
            # Initiator -> AP: MIC+Secure+Request+SMK = SMK 1
            smk[0] = True
        elif sa == bssid and da == addr1 and key_info == 0x2382:
            # AP -> Responder: ACK+MIC+Secure+SMK = SMK 2
            smk[1] = True
        elif sa == addr1 and da == bssid and key_info == 0x2302:
            # Responder -> AP: MIC+Secure+SMK = SMK 3
            smk[2] = True
        elif sa == bssid and da == addr1 and key_info == 0x3342:
            # AP -> Responder: Install+MIC+Secure+EncrKeyData+SMK = SMK 4
            smk[3] = True
        elif sa == bssid and da == addr0 and key_info == 0x3302:
            # AP -> Initiator: MIC+Secure+EncrKeyData+SMK = SMK 5
            smk[4] = True
        elif sa == addr0 and da == addr1 and key_info == 0x008a:
            # Initiator -> Responder: Pairwise+ACK = STK 1
            stk[0] = True
        elif sa == addr1 and da == addr0 and key_info == 0x010a:
            # Responder -> Initiator: Pairwise+MIC = STK 2
            stk[1] = True
        elif sa == addr0 and da == addr1 and key_info == 0x038a:
            # Initiator -> Responder: Pairwise+ACK+MIC+Secure = STK 3
            stk[2] = True
        elif sa == addr1 and da == addr0 and key_info == 0x030a:
            # Responder -> Initiator: Pairwise+MIC+Secure = STK 4
            stk[3] = True

    logger.info("Seen SMK messages: " + str(smk))
    logger.info("Seen STK messages: " + str(stk))
    if False in smk:
        raise Exception("Missing SMK message: " + str(smk))
    if False in stk:
        raise Exception("Missing STK message: " + str(stk))