def doGetPaymentAccount(cid, pid):
'''Perform Retrieve Payment Account from the vault
Input:
cid - customer id
pid - payment id
Output:
nothing
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object - this transaction doesn't require a Request Object
# 2. Send the transaction
try:
response = wpTransact("GetPaymentAccount", "", cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = PaymentAccountResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doGetPaymentAccount failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Get Payment Account transaction successful. CustomerId: " + str(rp.vaultPaymentMethod.customerId) + " Card: " + rp.vaultPaymentMethod.card.maskedNumber
print msg
log.info(msg)
return
def doGetCustomer(cid):
'''Perform Retrieve Customer in the vault
Input:
cid - customer id
Output:
nothing
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object - there transaction doesn't require a Request Object
# 2. Send the transaction
try:
response = wpTransact("GetCustomer", "", cid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = CustomerResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doGetCustomer failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Get Customer transaction successful. CustomerId: " + str(rp.customerId) + " Name: " + rp.vaultCustomer.firstName + " " + rp.vaultCustomer.lastName
print msg
log.info(msg)
return
def doGetTransaction(tid):
'''Get a transaction based on transaction id
Input:
tid - transaction id
Output:
none
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object - none required for this operation
# 2. Send the transaction
try:
response = wpTransact("GetTransaction", "", tid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = TransactionReportingResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = "GetTransaction failed. Result: , " + str(
rp.result) + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
cardNumber = rp.transactions[0].cardNumber
cardType = rp.transactions[0].creditCardType
amount = str(rp.transactions[0].transactionData.amount)
msg = "Get Transaction successful. (" + cardType + " " + cardNumber + " $" + amount + ")"
print msg
log.info(msg)
return
def doCreateCustomer():
'''Perform Create Customer in the vault
Input:
nothing
Output:
CustomerId
Raises:
Exceptions raised by wpTransact()
'''
test.random() # get a random test data set
# 1. Fill in the Request Object
address = Address()
address.line1 = test.getAddress()
address.city = test.getCity()
address.state = test.getState()
address.zip = test.getZip()
address.country = test.getCountry()
address.company = test.getCompany()
address.phone = test.getPhone()
udf1 = UserDefinedField()
udf2 = UserDefinedField()
n = datetime.now()
udf1.udfName = 'udf1'
udf1.value = n.strftime('%d-%b-%y')
udf2.udfName = 'udf2'
udf2.value = n.strftime('%I:%M %p')
cr = CustomerRequest()
cr.firstName = test.getFirstName()
cr.lastName = test.getLastName()
cr.phoneNumber = test.getPhone()
cr.emailAddress = test.getEmail()
cr.company = test.getCompany()
cr.notes = "Joe Kleinwaechter entered this from his python app. Need to delete it."
cr.attachAddress(address)
cr.attachUserDefinedField(udf1)
cr.attachUserDefinedField(udf2)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("CreateCustomer", cr.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = CustomerResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doCreateCustomer failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Create Customer transaction successful. CustomerId: " + str(rp.customerId)
print msg
log.info(msg)
return rp.customerId
def doCreateCustomerAndPayment():
'''Perform Create Customer in the vault
Input:
nothing
Output:
CustomerId
Raises:
Exceptions raised by wpTransact()
'''
test.random() # get a random test data set
# 1. Fill in the Request Object
address = Address()
address.line1 = test.getAddress()
address.city = test.getCity()
address.state = test.getState()
address.zip = test.getZip()
address.country = test.getCountry()
address.company = test.getCompany()
address.phone = test.getPhone()
card = Card()
card.number = test.getCardPAN()
card.cvv = test.getCVV()
card.expirationDate = test.getExpirationDate()
cr = CustomerAndPaymentRequest()
cr.firstName = test.getFirstName()
cr.lastName = test.getLastName()
cr.phoneNumber = test.getPhone()
cr.emailAddress = test.getEmail()
cr.company = test.getCompany()
cr.notes = "Joe Kleinwaechter entered this from his python app. Need to delete it."
cr.primary = True
cr.attachAddress(address)
cr.attachCard(card)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("CreateCustomerAndPayment", cr.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = CustomerAndPaymentResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doCreateCustomerAndPayment failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Create Customer and Payment transaction successful. CustomerId: " + str(rp.vaultCustomer.customerId) + " PaymentId: " + str(rp.vaultCustomer.primaryPaymentMethodId)
print msg
log.info(msg)
return rp.vaultCustomer.customerId
def batchOperation(retrieve=False, bId=0):
'''
This function is the common logic for the three batch calls. No need to call this function directly
Input: retrieve = True if this is a get operation
bId = 0 if retrieveing current batch, otherwise it is the batch id
Output:
batchId = batchid returned
Raises:
WpBadResponse
others raised from transact())
'''
# 1. Fill in the Request Object
cb = BatchRequest()
log.debug("batchOperation retrieve: %s, bid: %s Request: %s", retrieve,
str(bId), pformat(cb.serialize(), indent=1))
# Do the approporate transaction based on arguments
if retrieve is False: # close the currently open batch
op = "CloseBatch"
else:
if bId: # Retrieve a Closed Batch using its batch id
op = "GetBatchById"
else: # get the currently open batch
op = "GetBatch"
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact(op, cb.serialize(), bId)
except:
raise # pass upward
# 3. Deserialize the result into a Response Object
rp = BatchResponseParameters(response)
if (rp.responseCode != 1):
errMsg = op + " failed. Batch id: " + str(
rp.batchId
) + "Result: + " + rp.result + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
# Print out transactions in the batch specified
msg = op + " transactions: {"
for i in rp.transactions:
msg += str(i.transactionId) + " "
msg += "}"
print msg
log.info(msg)
msg = op + " transaction successful. BatchId: " + rp.batchId
print msg
log.info(msg)
return rp.batchId
def doUpdateTransaction(tid):
'''Update details on a previous transaction
Input:
tid - transaction id
Output:
none
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
# For this exercise we'll attach some level 2 data to the transaction
'''
l2 = LevelTwoData()
now = datetime.datetime.now()
l2.orderDate = now.strftime('%d/%b/%y')
l2.purchaseOrder = "PO325425"
l2.dutyAmount = 1.15
l2.freightAmount = 2.30
l2.retailLaneNumber = 69
l2.taxAmount = 0.05
l2.status = "EXEMPT"
'''
ut = UpdateTransactionRequest()
ut.referenceTransactionId = tid
ut.email = "*****@*****.**"
ut.emailReceipt = True
'''ut.attachLevelTwoData(l2)'''
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateTransaction", ut.serialize(), tid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = TransactionReportingResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = "UpdateTransaction failed. Result: , " + rp.result + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
# return the transaction id and amount
msg = "Update transaction successful. TransactionId = " + str(
rp.transaction.transactionId) + " IP Address: " + str(rp.ipAddress)
print msg
log.info(msg)
return
def doSearchTransactions():
'''Search a transaction based on supplied criteria
Input:
none
Output:
none
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
st = SearchTransactionsRequest()
# Seach to last 30 days.
stop = datetime.date.today()
oneMonth = datetime.timedelta(days=30)
start = stop - oneMonth
st.startDate = str(start.month) + "/" + str(start.day) + "/" + str(
start.year)
st.endDate = str(stop.month) + "/" + str(stop.day) + "/" + str(stop.year)
log.info("Seach range: %s - %s", st.startDate, st.endDate)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("SearchTransactions", st.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
rp = TransactionReportingResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = "SearchTransactions failed. Result: , " + rp.result + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
# return the transaction id and amount
msg = "Search tansactions successful."
print msg
log.info(msg)
for record in rp.transactions:
msg = " (" + record.creditCardType + " " + record.cardNumber + " $" + str(
record.transactionData.amount)
print msg
return
def doPriorAuthCapture(previousTransaction):
'''Perform a Prior Auth Capture
Input:
tid - Requires a transaction id from previous auth
amt - amount to capture (not to exceed original auth)
Returns:
transactionId that was captured
amount that was authorized
Raises:
WpBadResponse
WpFunctionCallError
other WP exeptions raised from wpTransact()
'''
tid = previousTransaction[0]
amt = previousTransaction[1]
if tid == 0: # invalid transaction id
raise WpInvalidFunctionCallError("doPriorAuthCapture (" + str(tid) + ")")
par = PriorAuthCaptureRequest()
test.random() # use this just to get a different amount each time
par.transactionId = tid
par.amount = amt
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("PriorAuthCapture", par.serialize())
except: # pass the exception up
raise
# 3. Deserialize the result into a Response Object
rp = AuthResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doPriorAuthCapture failed. TransactionId: " + str(par.transactionId) + " Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "PriorAuthCapture transaction successful. TransactionId: " + str(rp.transaction.transactionId) + " (" + "$" + amt + ")"
print msg
log.info(msg)
return [rp.transaction.transactionId, rp.transaction.authorizedAmount]
def doChargeWithToken(cid, token=""):
'''This is a test of the charge with token functionality which seems to be broken
It is assumed the payment method is 1
Input:
cid = customer id
token = optianl token to use instead of card
Output:
Raises:
WpBadResponseError
Exceptions passed from wpTransact()
'''
pvt = PaymentVaultToken()
pvt.customerId = cid
if token == "":
pvt.paymentMethodId = 1
pvt.paymentType = "CREDIT_CARD"
else:
pvt.paymentMethodId = token
ar = AuthorizationRequest()
ar.amount = 10.0
ar.attachPaymentVaultToken(pvt) # attach the vault object
try:
response = wpTransact("Charge", ar.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
rp = AuthResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = "Charge failed. Result: , " + rp.result + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
# return the transaction id and amount
transactionId = rp.transaction.transactionId
msg = "Charge transaction successful. TransactionId:" + str(transactionId) + "(" + test.getFirstName() + " " + test.getLastName() + " $" + str(test.getAmount()) + ")"
print msg
log.info(msg)
return [transactionId, ar.amount]
def doUpdatePaymentAccount(cid, pid):
'''Create a payment instrument and attach to a vault customer
Input:
cid - customer id
pid - payment method id
Output:
nothing
Raises:
Exceptions raised by wpTransact()
'''
test.reread() # reread the last record as I am assuming we are simply modifying the last account created
# 1. Fill in the Request Object
card = Card()
card.number = test.getCardPAN()
card.cvv = '999' # this is the field we will modify for this test case
card.expirationDate = test.getExpirationDate()
va = PaymentAccountRequest()
va.customerId = cid
va.primary = True
va.paymnetMethodId = pid
va.attachCard(card)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdatePaymentAccount", va.serialize(), cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = PaymentAccountResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdatePaymentAccount failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Update Payment Account transaction successful. CustomerId: " + str(rp.vaultPaymentMethod.customerId) + " PaymentId: " + str(rp.vaultPaymentMethod.paymentId)
print msg
log.info(msg)
return
def doCreatePaymentAccount(cid):
'''Create a payment instrument and attach to a vault customer
Input:
cid - customer id
Output:
pid - payment id
Raises:
Exceptions raised by wpTransact()
'''
test.random() # get a random test data set
# 1. Fill in the Request Object
card = Card()
card.number = test.getCardPAN()
card.cvv = test.getCVV()
card.expirationDate = test.getExpirationDate()
va = PaymentAccountRequest()
va.customerId = cid
va.primary = True
va.attachCard(card)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("CreatePaymentAccount", va.serialize(), cid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = PaymentAccountResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doCreatePaymentAccount failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Create Payment Account transaction successful. CustomerId: " + str(rp.vaultPaymentMethod.customerId) + " PaymentId: " + str(rp.vaultPaymentMethod.paymentId)
print msg
log.info(msg)
return rp.vaultPaymentMethod.paymentId
def doGetPaymentPlan(cid, pid):
''' Retrieve an identified payment plan
Input:
cid - customer id (required)
pid - plan id
Output:
planId - the id of the payment plan
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
var = GetPaymentPlanRequest()
var.customerId = cid
var.planId = pid
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("GetPaymentPlan", var.serialize(), cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = GetPaymentPlanResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doGetPaymentPlan failed. Result: " + str(
rp.result) + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Get Payment Plan transaction successful. Type: " + rp.planType + " CustomerId: " + str(
rp.customerId) + " PlanId: " + str(rp.planId)
print msg
log.info(msg)
return rp.planId
def doDeletePaymentAccount(cid, pid):
'''Perform Delete Account from the vault
Input:
cid - customer id
pid - payment id
Output:
nothing
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
# Doc error??
# va = PaymentAccountRequest() # we will resuse this object as we only need a subset
# va.customerId = cid
# va.paymentMethodId = pid
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("DeletePaymentAccount", "", cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = PaymentAccountResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doDeletePaymentAccount failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Delete Payment Account transaction successful. CustomerId: " + cid
print msg
log.info(msg)
return
def doUpdateCustomerAndPayment(cid):
'''Perform Update Customer in the vault
Input:
cid - customer id
Output:
CustomerId
Raises:
Exceptions raised by wpTransact()
'''
test.reread() # get a random test data set
# 1. Fill in the Request Object
address = Address()
address.line1 = test.getAddress()
address.city = test.getCity()
address.state = test.getState()
address.zip = test.getZip()
address.country = test.getCountry()
address.company = test.getCompany()
address.phone = test.getPhone()
udf1 = UserDefinedField()
udf2 = UserDefinedField()
n = datetime.now()
udf1.udfName = 'udf1' # this is the field we will modify for this test case
udf1.value = n.strftime('%d-%b-%y')
udf2.udfName = 'udf2' # this is the field we will modify for this test case
udf2.value = n.strftime('%I:%M %p')
card = Card()
card.number = test.getCardPAN()
card.cvv = '999' # this is the field we will modify for this test case
card.expirationDate = test.getExpirationDate()
cr = CustomerAndPaymentRequest()
cr.customerId = cid
cr.paymentMethodId = 1
cr.firstName = test.getFirstName()
cr.lastName = test.getLastName()
cr.phoneNumber = test.getPhone()
cr.emailAddress = test.getEmail()
cr.company = test.getCompany()
cr.notes = "This record had been modified using unicorn dust."
cr.primary = True
cr.attachAddress(address)
cr.attachCard(card)
cr.attachUserDefinedField(udf1)
cr.attachUserDefinedField(udf2)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateCustomerAndPayment", cr.serialize(), cid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = CustomerAndPaymentResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdateCustomerAndPayment failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Update Customer and Payment transaction successful. CustomerId: " + str(rp.vaultCustomer.customerId) + " PaymentId: " + str(rp.vaultCustomer.primaryPaymentMethodId)
print msg
log.info(msg)
return rp.vaultCustomer.customerId
def doUpdateRecurringPaymentPlan(cid, pid):
'''Perform Update Recurring Payment
Input:
cid - customer id
pid - paymnet plan id
Output:
planId - the id of the payment plan
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
plan = RecurringPaymentPlan()
plan.cycleType = "monthly"
plan.dayOfTheMonth = 1
plan.dayOfTheWeek = 1
plan.month = 6
plan.frequency = 10
plan.amount = 22.95
plan.startDate = '10/1/2017'
plan.endDate = '10/1/2035'
plan.maxRetries = 4
plan.primaryPaymentMethodId = 1
plan.active = False
plan.notes = "More recurring plan updates"
# Let's attach a UDF for fun
udf1 = UserDefinedField()
udf2 = UserDefinedField()
now = datetime.datetime.now()
udf1.udfName = 'udf1'
udf1.value = now.strftime('%d-%b-%y')
udf2.udfName = 'udf2'
udf2.value = now.strftime('%I:%M %p')
plan.attachUserDefinedField(udf1)
plan.attachUserDefinedField(udf2)
rec = RecurringPaymentPlanRequest()
rec.customerId = cid
rec.planId = pid
rec.attachPlan(plan)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateRecurringPaymentPlan", rec.serialize(),
cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = RecurringPaymentPlanResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdateRecurringPayment failed. Result: " + str(
rp.result) + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Update Recurring Payment Plan transaction successful. CustomerId: " + str(
rp.customerId) + " PlanId: " + str(rp.planId)
print msg
log.info(msg)
return rp.planId
def doUpdateVariablePaymentPlan(cid, pid):
'''Perform Update ta Variable Payment Plan
Input:
cid - customer id
pid - payment plan id
Output:
planId - the id of the payment plan
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
plan = VariablePaymentPlan()
plan.planStartDate = " 12/01/2017"
plan.maxRetries = 4
plan.primaryPaymentMethodId = 1
plan.active = True
plan.notes = "More variable plan updates."
sched = ScheduledPayment()
sched.amount = 200.00
sched.paid = False
sched.paymentDate = '12/05/2017'
# Attach a UDF - just because we can
udf1 = UserDefinedField()
udf2 = UserDefinedField()
now = datetime.datetime.now()
udf1.udfName = 'udf1'
udf1.value = now.strftime('%d-%b-%y')
udf2.udfName = 'udf2'
udf2.value = now.strftime('%I:%M %p')
plan.attachUserDefinedField(udf1)
plan.attachUserDefinedField(udf2)
plan.attachScheduledPayment(sched)
var = VariablePaymentPlanRequest()
var.customerId = cid
var.planId = pid
var.attachPlan(plan)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateVariablePaymentPlan", var.serialize(),
cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = VariablePaymentPlanResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdateVariablePayment failed. Result: " + str(
rp.result) + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Variable Payment Plan transaction successful. CustomerId: " + str(
rp.customerId) + " PlanId: " + str(rp.planId)
print msg
log.info(msg)
return rp.planId
def doUpdateInstallmentPaymentPlan(cid, pid):
'''Perform Updte Installment Payment Plan
Input:
cid - customer id (required)
pid - only required if doing an update to an existing plan
Output:
planId - the id of the payment plan
Raises:
Exceptions raised by wpTransact()
'''
# 1. Fill in the Request Object
plan = InstallmentPaymentPlan()
plan.cycleType = 'monthly'
plan.dayOfTheMonth = 1
plan.dayOfTheWeek = 1
plan.frequency = 1
plan.numberOfPayments = 12
plan.installmentAmount = 276.95
plan.remainderAmount = 12.90
plan.balloonPaymentAddedTo = 'FIRST'
plan.remainderPaymentAddedTo = 'LAST'
plan.startDate = '09/01/2017'
plan.endDate = '10/01/2020'
plan.maxRetries = 4
plan.primaryPaymentMethodId = 1
plan.notes = 'This is an installment plan'
plan.active = True
# Attach a user defined field
udf1 = UserDefinedField()
udf2 = UserDefinedField()
now = datetime.datetime.now()
udf1.udfName = 'udf1'
udf1.value = now.strftime('%d-%b-%y')
udf2.udfName = 'udf2'
udf2.value = now.strftime('%I:%M %p')
plan.attachUserDefinedField(udf1)
plan.attachUserDefinedField(udf2)
plan.numberOfPayments = 15
ins = InstallmentPaymentPlanRequest()
ins.customerId = cid
plan.notes = "More installment plan updates"
ins.planId = pid
ins.attachPlan(plan)
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateInstallmentPaymentPlan", ins.serialize(),
cid, pid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = InstallmentPaymentPlanResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdateInstallmentPayment failed. Result: " + str(
rp.result) + " Response Code: " + str(
rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Update Installment Payment Plan transaction successful. CustomerId: " + str(
rp.customerId) + " PlanId: " + str(rp.planId)
print msg
log.info(msg)
return rp.planId
def doManualAuthTransaction(withCapture=False, verifyOnly=False):
'''This allows an auth transaction not using the random test database
Input:
withCapture - True if doing a Charge, False if just an Auth
verifyOnly - True if this is only a verify request, False if not
Output:
if verify - responseCode
else [transaction id, amount]
Raises:
WpBadResponseError
Exceptions passed from wpTransact()
'''
# 1. Fill in the Request Object
# Create the objects being utilized
ar = AuthorizationRequest()
address = Address()
card = Card()
sd = ServiceData()
ei = ExtendedInformation()
address.line1 = "201 17th Street"
address.city = "Atlanta"
address.state = "GA"
address.zip = "30000"
address.country = "USA"
address.company = "Wordplay"
address.phone = "678.587.1836"
card.trackData = "%B4444333322221111^SECURENET^20041015432112345678?;4444333322221111=20041015432112345678?"
#######################################
# % - sentinel code
# B - B type Track 1 data
# 4444333322221111 - pan
# ^SECURENET^ - name (23 chars or less) (^ are field seperators)
# 2004 - expiration date YYMM
# 101 - service code 1=International capable, 0=Normal Rules 1=no restructions
# 5432112345678? - Discretionary data
# ; - Track 2 data
# 4444333322221111 - PAN
# = - seperator
# 2004 - expiration date
# 101 - service code
# 5432112345678 - discretionary data
# ? - sentinal code
#######################################
# card.number = "5500000000000004" # MC
# card.cvv = "111"
# card.expirationDate = "03/20"
sd.gratuityAmount = 1.96
sd.server = "Joey"
ar.amount = 10.39
# Build the object relationships
log.debug("SD: %s\n", pformat(sd.serialize(), indent=1))
ei.attachServiceData(sd)
log.debug("EI: %s\n", pformat(ei.serialize(), indent=1))
ar.attachExtendedInformation(ei)
log.debug("Address: %s\n", pformat(address.serialize(), indent=1))
card.attachAddress(address) # attach the address object
log.debug("Card: %s\n", pformat(card.serialize(), indent=1))
ar.attachCard(card) # attach the card object
if withCapture: # we've overloaded this function as most of the code is the same for Charge, Auth, and verify
operation = "Charge"
else:
if verifyOnly:
operation = "Verify"
else:
operation = "Authorize"
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact(operation, ar.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = AuthResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = operation + " failed. Result: , " + rp.result + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
if verifyOnly:
msg = operation + " transaction successful. (" + test.getFirstName() + " " + test.getLastName() + " $" + str(test.getAmount()) + ")"
print msg
log.info(msg)
return rp.responseCode
else:
# return the transaction id and amount
transactionId = rp.transaction.transactionId
msg = operation + " transaction successful. TransactionId:" + str(transactionId) + "(" + test.getFirstName() + " " + test.getLastName() + " $" + str(test.getAmount()) + ")"
print msg
log.info(msg)
return [transactionId, ar.amount]
def baseAuthTransaction(withCapture=False, verifyOnly=False):
'''Perform the transactions that appear like an auth transaction
Input:
withCapture - True if doing a Charge, False if just an Auth
verifyOnly - True if this is only a verify request, False if not
Output:
if verify - responseCode
else [transaction id, amount]
Raises:
WpBadResponseError
Exceptions passed from wpTransact()
'''
# 1. Fill in the Request Object
# Fill in Address object
address = Address()
test.random()
address.line1 = test.getAddress()
address.city = test.getCity()
address.state = test.getState()
address.zip = test.getZip()
address.country = test.getCountry()
address.company = test.getCompany()
address.phone = test.getPhone()
# Fill in Card object
card = Card()
card.number = test.getCardPAN()
card.cvv = test.getCVV()
card.expirationDate = test.getExpirationDate()
# Fill in AuthorizationRequest object
ar = AuthorizationRequest()
ar.amount = test.getAmount()
# Build the full auth request object by attaching supporting objects
card.attachAddress(address)
ar.attachCard(card)
if withCapture: # we've overloaded this function as most of the code is the same for Charge, Auth, and verify
operation = "Charge"
else:
if verifyOnly:
operation = "Verify"
else:
operation = "Authorize"
# 2. Send the transaction on a serialized Request Object
log.debug("Sending transaction\n")
try:
response = wpTransact(operation, ar.serialize())
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = AuthResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1): # response from Worldpay indicates failure
errMsg = operation + " failed. Result: , " + rp.result + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
if verifyOnly:
msg = operation + " transaction successful. (" + test.getFirstName() + " " + test.getLastName() + " $" + str(test.getAmount()) + ")"
print msg
log.info(msg)
return rp.responseCode
else:
# return the transaction id and amount
transactionId = rp.transaction.transactionId
msg = operation + " transaction successful. TransactionId:" + str(transactionId) + "(" + test.getFirstName() + " " + test.getLastName() + " $" + str(test.getAmount()) + ")"
print msg
log.info(msg)
return [transactionId, ar.amount]
def doUpdateCustomer(cid):
'''Perform Create Customer in the vault
Input:
cid - customer id
Output:
nothing
Raises:
Exceptions raised by wpTransact()
'''
# Note that for test purposes, this is just going to read back in the current test record and fill it in under the assumption that the cid passed was the last one created
test.reread() # get the current test data set
# 1. Fill in the Request Object
address = Address()
address.line1 = test.getAddress()
address.city = test.getCity()
address.state = test.getState()
address.zip = test.getZip()
address.country = test.getCountry()
address.company = test.getCompany()
address.phone = test.getPhone()
udf1 = UserDefinedField()
udf2 = UserDefinedField()
n = datetime.now()
udf1.udfName = 'udf1'
udf1.value = n.strftime('%d-%b-%y')
udf2.udfName = 'udf2'
udf2.value = n.strftime('%I:%M %p')
cr = CustomerRequest()
cr.firstName = test.getFirstName()
cr.lastName = test.getLastName()
cr.phoneNumber = test.getPhone()
cr.emailAddress = test.getEmail()
cr.company = test.getCompany()
cr.attachAddress(address)
cr.attachUserDefinedField(udf1)
cr.attachUserDefinedField(udf2)
n = datetime.now()
cr.notes = "This record updated on " + n.strftime('%d-%b-%y @%I:%M %p')
# 2. Send the transaction on a serialized Request Object
try:
response = wpTransact("UpdateCustomer", cr.serialize(), cid)
except: # pass the exception up. Nothing to do here at the moment
raise
# 3. Deserialize the result into a Response Object
rp = CustomerResponseParameters(response)
log.info(">>>Response>>> \n%s", pformat(rp, indent=1))
if (rp.responseCode != 1):
errMsg = "doUpdateCustomer failed. Result: " + str(rp.result) + " Response Code: " + str(rp.responseCode) + " Message: " + rp.message
raise WpBadResponseError(errMsg)
msg = "Update Customer transaction successful. CustomerId: " + str(rp.customerId)
print msg
log.info(msg)
return