def __init__(self, lsysargv, sysargv):
self.dcol = 1
self.on = 1
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = xfl.fl_bgn_form(xfl.FL_UP_BOX, 400, 400)
pobj1 = xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 320, 20, 40, 30, \
"Exit")
xfl.fl_set_object_callback(pobj1, self.done, 0)
pobj2 = xfl.fl_add_free(xfl.FL_CONTINUOUS_FREE, 40, 80, 320, 280, \
"", self.handle_free1)
xfl.fl_end_form()
depth = xfl.fl_get_visual_depth()
if depth < 4: # Can't do it if less than 4 bit deep...
print("This Demo requires a depth of at least 4 bits\n")
xfl.fl_finish()
sys.exit(1)
elif depth > 7: # ...but too large a depth also won't do
depth = 7
self.cole = (1 << depth) - 1
if self.cole > 64:
self.cole = 64
pobj2.contents.u_ldata = col = xfl.FL_FREE_COL1
self.cole += col
for i in range(col, self.cole + 1):
j = 255 * (i - col) / (self.cole - col)
xfl.fl_mapcolor(i, j, j, j)
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_NOBORDER, \
"Free Object")
xfl.fl_do_forms()
def main(lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
xfl.fl_set_resource(xfl.FLOKLabel, "Go")
if xfl.fl_show_question("Do you want bold font ?", 1):
xfl.fl_set_goodies_font(xfl.FL_BOLD_STYLE, xfl.FL_NORMAL_SIZE)
xfl.fl_show_messages("This is a test program for the goodies of the "
"xforms library")
xfl.fl_add_timeout(5000, timeout_remove_alert, 0)
xfl.fl_show_alert("Alert", "Alert form can be used to inform", \
" about recoverable errors", 0)
if xfl.fl_show_question("Do you want to quit?", 0):
sys.exit(0)
s = xfl.fl_show_input("Enter a string:", "")
if not s:
s = ""
str1 = s
xfl.fl_show_message("You typed:", "", str1)
choice = xfl.fl_show_choices("Pick a choice", 3, "One", "Two", \
"Three", 2)
if choice == 1:
xfl.fl_show_message("You typed: One", "", "")
elif choice == 2:
xfl.fl_show_message("You typed: Two", "", "")
elif choice == 3:
xfl.fl_show_message("You typed: Three", "", "")
else:
xfl.fl_show_message("An error occured!", "", "")
s = xfl.fl_show_input("Enter another string:", str1)
if not s:
s = "<Cancel>"
str2 = s
xfl.fl_show_message("You typed:", "", str2)
xfl.fl_show_messages("Good Bye")
xfl.fl_finish()
return 0
def __init__(self, lsysargv, sysarg):
xfl.fl_initialize(lsysargv, sysarg, "FormDemo", None, 0)
self.pform = xfl.fl_bgn_form(xfl.FL_UP_BOX, 300, 300)
self.psl = xfl.fl_add_slider(xfl.FL_VERT_SLIDER, 40, 40, 60, 220, "X")
xfl.fl_set_slider_value(self.psl, 0.5)
xfl.fl_set_object_callback(self.psl, self.slider_callback, 0)
self.pbut1 = xfl.fl_add_lightbutton(xfl.FL_PUSH_BUTTON, 140, 220, \
120, 40, "0.0")
xfl.fl_set_object_callback(self.pbut1, self.but1_callback, 0)
self.pbut2 = xfl.fl_add_lightbutton(xfl.FL_PUSH_BUTTON, 140, 160, \
120, 40, "0.5")
xfl.fl_set_button(self.pbut2, 1)
xfl.fl_set_object_callback(self.pbut2, self.but2_callback, 0)
self.pbut3 = xfl.fl_add_lightbutton(xfl.FL_PUSH_BUTTON, 140, 100, \
120, 40, "1.0")
xfl.fl_set_object_callback(self.pbut3, self.but3_callback, 0)
self.pbut = xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 140, 40, \
120, 40, "Exit")
xfl.fl_set_object_callback(self.pbut, self.but_callback, 0)
xfl.fl_end_form()
xfl.fl_show_form(self.pform, xfl.FL_PLACE_CENTER, xfl.FL_NOBORDER, \
"slRadio")
while xfl.fl_do_forms():
pass
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
self.gd = []
for u in range(0, 9+1):
self.gd.append(FD_grav_data()) #FD_grav_data()*9
self.gr = [xfl.FL_NorthWest, xfl.FL_North, xfl.FL_NorthEast, \
xfl.FL_West, xfl.FL_NoGravity, xfl.FL_East, \
xfl.FL_SouthWest, xfl.FL_South, xfl.FL_SouthEast]
self.w = 500
self.h = 400
self.bw = 200
self.bh = 200
#grav = FD_gravity()
#help_ = FD_help()
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.help_ = self.create_form_help()
self.grav = self.create_form_gravity(self.help_.help_)
xfl.fl_set_app_mainform(self.grav.grav)
for i in range (0, 9):
self.gd[i].box = self.grav.box
self.gd[i].grav = self.gr[i]
self.gd[i].rx = self.grav.rx
self.gd[i].ry = self.grav.ry
xfl.fl_show_form(self.grav.grav, \
xfl.FL_PLACE_CENTER | xfl.FL_FREE_SIZE, xfl.FL_FULLBORDER, \
"Gravity Demo")
xfl.fl_do_forms()
# xfl.fl_hide_form(self.grav.grav)
# xfl.fl_free_form(self.grav.grav)
# if (self.help_->is_shown )
# xfl.fl_hide_form(self.help_.help_)
# xfl.fl_free_form(self.help_.help_)
xfl.fl_finish()
sys.exit(0)
def main(lsysargv, sysargv):
sc = 1.0
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
ui = create_form_form()
strng = "%.2f" % sc
xfl.fl_set_input(ui.pscaleobj, strng)
xfl.fl_show_form(ui.pform, xfl.FL_PLACE_CENTER | xfl.FL_FREE_SIZE, xfl.FL_FULLBORDER, "Scaling")
while True:
oldsc = sc
pobj = xfl.fl_do_forms()
if xfl.fl_is_same_object(pobj, ui.pexitobj):
sys.exit(0)
elif xfl.fl_is_same_object(pobj, ui.psmallerobj):
sc = sc * 0.8
elif xfl.fl_is_same_object(pobj, ui.plargerobj):
sc = sc / 0.8
elif xfl.fl_is_same_object(pobj, ui.pscaleobj):
sc = float(xfl.fl_get_input(ui.pscaleobj))
if sc < 0.50:
sc = 0.50
elif sc > 3:
sc = 3
if sc != oldsc:
xfl.fl_scale_form(ui.pform, sc / oldsc, sc / oldsc)
xfl.fl_redraw_form(ui.pform) # to avoid garbage on screen
strng = "%.2f" % sc
xfl.fl_set_input(ui.pscaleobj, strng)
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
fd_twheelform = self.create_form_twheelform()
# show the first form
xfl.fl_show_form(fd_twheelform, xfl.FL_PLACE_CENTERFREE, \
xfl.FL_FULLBORDER, "twheelform")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_set_border_width(-3)
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.ui = self.create_form_fontsform()
xfl.fl_scale_form(self.ui.pfontsform, 1.1, 1.2)
xfl.fl_set_object_dblbuffer(self.ui.ptextobj, 1)
xfl.fl_set_object_bw(self.ui.ptextobj, 5)
nfnt = xfl.fl_enumerate_fonts(self.addit, 1)
xfl.fl_select_browser_line(self.ui.pfontobj, 1)
xfl.fl_addto_browser(self.ui.psizeobj, "8 (tiny)")
xfl.fl_addto_browser(self.ui.psizeobj, "10 (small)")
xfl.fl_addto_browser(self.ui.psizeobj, "11 (scaled)")
xfl.fl_addto_browser(self.ui.psizeobj, "12 (normal)")
xfl.fl_addto_browser(self.ui.psizeobj, "13 (scaled)")
xfl.fl_addto_browser(self.ui.psizeobj, "14 (medium)")
xfl.fl_addto_browser(self.ui.psizeobj, "18 (large)")
xfl.fl_addto_browser(self.ui.psizeobj, "24 (Huge)")
xfl.fl_addto_browser(self.ui.psizeobj, "30 (scaled)")
xfl.fl_select_browser_line(self.ui.psizeobj, 2)
xfl.fl_set_object_lstyle(self.ui.ptextobj, xfl.FL_NORMAL_STYLE)
xfl.fl_call_object_callback(self.ui.pfontobj)
xfl.fl_call_object_callback(self.ui.psizeobj)
xfl.fl_show_form(self.ui.pfontsform, xfl.FL_PLACE_CENTER, \
xfl.FL_TRANSIENT, "Fonts")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_set_border_width(-2)
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = xfl.fl_bgn_form(xfl.FL_UP_BOX, 350, 250)
pobj = xfl.fl_add_pixmap(xfl.FL_NORMAL_PIXMAP, 60, 70, 100, 100, "")
xfl.fl_set_object_boxtype(pobj, xfl.FL_DOWN_BOX)
xfl.fl_set_pixmap_file(pobj, "porsche.xpm")
ppos = xfl.fl_add_positioner(xfl.FL_OVERLAY_POSITIONER, 60, 70, \
100, 100, "")
xfl.fl_set_positioner_xbounds(ppos, 0, 1)
xfl.fl_set_positioner_ybounds(ppos, 0, 1)
xfl.fl_set_object_callback(ppos, self.positioner_cb, 0)
self.pxval = xfl.fl_add_box(xfl.FL_DOWN_BOX, 230, 40, 100, 30, "")
xfl.fl_set_object_color(self.pxval, xfl.FL_COL1, xfl.FL_COL1)
self.pyval = xfl.fl_add_box(xfl.FL_DOWN_BOX, 230, 90, 100, 30, "")
xfl.fl_set_object_color(self.pyval, xfl.FL_COL1, xfl.FL_COL1)
xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 230, 200, 100, 30, \
"Exit")
xfl.fl_end_form()
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_TRANSIENT, \
"XOR Positioner")
self.positioner_cb(ppos, 0)
xfl.fl_do_forms()
xfl.fl_hide_form(pform)
xfl.fl_finish()
sys.exit(0)
def main(lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = create_form_form()
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_FULLBORDER, \
"IconTest")
xfl.fl_do_forms()
return 0
def __init__(self, lsysargv, sysargv):
self.mess = ["slider returned", "counter returned", \
"input 1 returned", "input 2 returned"]
xfl.fl_set_border_width(-2)
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fd_form0 = self.create_form_form0()
# fill-in form initialization code
self.set_when(0)
xfl.fl_set_object_dblbuffer(self.fd_form0.br, 1)
pitem1st = xfl.fl_add_select_items(self.fd_form0.when, "RETURN_NONE")
xfl.fl_popup_entry_set_value(pitem1st, xfl.FL_RETURN_NONE)
pitem2nd = xfl.fl_insert_select_items(self.fd_form0.when, pitem1st, \
"RETURN_CHANGED")
xfl.fl_popup_entry_set_value(pitem2nd, xfl.FL_RETURN_CHANGED)
pitem3rd = xfl.fl_insert_select_items(self.fd_form0.when, pitem2nd, \
"RETURN_END")
xfl.fl_popup_entry_set_value(pitem3rd, xfl.FL_RETURN_END)
pitem4th = xfl.fl_insert_select_items(self.fd_form0.when, pitem3rd, \
"RETURN_END_CHANGED")
xfl.fl_popup_entry_set_value(pitem4th, xfl.FL_RETURN_END_CHANGED)
pitem5th = xfl.fl_insert_select_items(self.fd_form0.when, pitem4th, \
"RETURN_ALWAYS")
xfl.fl_popup_entry_set_value(pitem5th, xfl.FL_RETURN_ALWAYS)
# show the first form
xfl.fl_show_form(self.fd_form0.form0, xfl.FL_PLACE_CENTER, \
xfl.FL_FULLBORDER, "form0")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
self.pabox = [None] * 4
self.set = [0] * 4
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = self.create_form()
self.add_items_to_menu1()
xfl.fl_popup_entry_set_state(xfl.fl_get_nmenu_item_by_value( \
self.pmenu1, 0), xfl.FL_POPUP_CHECKED)
self.set[0] = 0
xfl.fl_set_object_color(self.pabox[0], xfl.FL_RED + self.set[0], \
xfl.FL_BLACK)
self.add_items_to_menu2()
xfl.fl_popup_entry_set_state(xfl.fl_get_nmenu_item_by_value( \
self.pmenu2, 1), xfl.FL_POPUP_CHECKED)
self.set[1] = 1
xfl.fl_set_object_color(self.pabox[1], xfl.FL_RED + self.set[1], \
xfl.FL_BLACK)
self.add_items_to_menu3()
xfl.fl_popup_entry_set_state(xfl.fl_get_nmenu_item_by_value( \
self.pmenu3, 2), xfl.FL_POPUP_CHECKED)
self.set[2] = 2
xfl.fl_set_object_color(self.pabox[2], xfl.FL_RED + self.set[2], \
xfl.FL_BLACK)
self.add_items_to_menu4()
xfl.fl_popup_entry_set_state(xfl.fl_get_nmenu_item_by_value( \
self.pmenu4, 3), xfl.FL_POPUP_CHECKED)
self.set[3] = 3
xfl.fl_set_object_color(self.pabox[3], xfl.FL_RED + self.set[3], \
xfl.FL_BLACK)
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_TRANSIENT, "Nmenu")
xfl.fl_do_forms()
xfl.fl_hide_form(pform)
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
self.rgbdb = [{'r':0, 'g':0, 'b':0}] * MAX_RGB
self.pcl = None
self.pdbobj = None
self.prescol = None
self.pcolbr = None
self.prs = None
self.pgs = None
self.pbs = None
self.dbname = ""
if os.path.exists(rgbfile):
self.dbname = rgbfile
elif os.path.exists(rgbfile_2):
self.dbname = rgbfile_2
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.create_form_cl()
if self.load_browser(self.dbname):
xfl.fl_set_object_label(self.pdbobj, self.dbname)
else:
xfl.fl_set_object_label(self.pdbobj, "None")
xfl.fl_set_form_minsize(self.pcl, self.pcl.contents.w , \
self.pcl.contents.h)
xfl.fl_set_form_maxsize(self.pcl, 2 * self.pcl.contents.w , \
2 * self.pcl.contents.h)
xfl.fl_show_form(self.pcl, xfl.FL_PLACE_FREE, xfl.FL_TRANSIENT, \
"RGB Browser")
xfl.fl_do_forms()
sys.exit(0)
def main(lsysarg, sysargv):
xfl.fl_initialize(lsysarg, sysargv, "FormDemo", None, 0)
pform = xfl.fl_bgn_form(xfl.FL_UP_BOX, 300, 300)
psl = xfl.fl_add_slider(xfl.FL_VERT_SLIDER, 40, 40, 60, 220, "X")
psl.contents.radio = 1
pbut1 = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 140, 220, \
120, 40, "0.0")
pbut2 = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 140, 160, \
120, 40, "0.5")
pbut3 = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 140, 100, \
120, 40, "1.0")
pexitbut = xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 140, 40, \
120, 40, "Exit")
xfl.fl_end_form()
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_NOBORDER, "slRadio")
while True:
pobj = xfl.fl_do_forms()
if xfl.fl_is_same_object(pobj, pbut1):
xfl.fl_set_slider_value(psl, 0.0)
elif xfl.fl_is_same_object(pobj, pbut2):
xfl.fl_set_slider_value(psl, 0.5)
elif xfl.fl_is_same_object(pobj, pbut3):
xfl.fl_set_slider_value(psl, 1.0)
elif xfl.fl_is_same_object(pobj, pexitbut):
break
xfl.fl_finish()
return 0
def __init__(self, lsysargv, sysargv):
self.INTERVAL = 800 # wait this long before show tip
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fd_form0 = self.create_form_form0()
# Fill-in form initialization code
xfl.fl_set_button(self.fd_form0.peek, 1)
xfl.fl_set_button(self.fd_form0.enter, 1)
xfl.fl_set_button(self.fd_form0.leave, 1)
xfl.fl_set_button(self.fd_form0.push, 1)
xfl.fl_set_button(self.fd_form0.release, 1)
xfl.fl_set_object_prehandler(self.fd_form0.butt, \
self.preemptive_handler)
self.set_tip(self.fd_form0.done, "Want to quit ?\nPress me")
self.set_tip(self.fd_form0.peek, "Turn preempting off")
self.set_tip(self.fd_form0.override, "Turn preempting on")
#xfl.fl_set_object_helper(self.fd_form0.done, \
# "Want to quit ?\nPress me")
#xfl.fl_set_object_helper(self.fd_form0.peek, "Turn preempting off")
#xfl.fl_set_object_helper(self.fd_form0.override, \
# "Turn preempting on")
# Show the first form
xfl.fl_show_form(self.fd_form0.form0, xfl.FL_PLACE_CENTER, \
xfl.FL_TRANSIENT, "Preemptive")
while not xfl.fl_is_same_object(xfl.fl_do_forms(), \
self.fd_form0.done):
pass # empty
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = xfl.fl_bgn_form(xfl.FL_UP_BOX, 130, 100)
self.pbr = xfl.fl_add_browser(xfl.FL_NORMAL_BROWSER, 5, 5, 95, 90, \
"")
pbut = xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 105, 5, 20, 8, \
"Exit")
pobj = xfl.fl_add_button(xfl.FL_NORMAL_BUTTON, 105, 75, 20, 8, \
"Load")
xfl.fl_set_object_callback(pobj, self.load_file, 0)
pobj = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 105, 60, 20, 8, \
"Small")
xfl.fl_set_object_callback(pobj, self.set_size, xfl.FL_SMALL_SIZE)
xfl.fl_call_object_callback(pobj)
xfl.fl_set_button(pobj, 1)
pobj = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 105, 50, 20, 8, \
"Normal")
xfl.fl_set_object_callback(pobj, self.set_size, xfl.FL_NORMAL_SIZE)
pobj = xfl.fl_add_lightbutton(xfl.FL_RADIO_BUTTON, 105, 40, 20, 8, \
"Large")
xfl.fl_set_object_callback(pobj, self.set_size, xfl.FL_LARGE_SIZE)
xfl.fl_end_form()
xfl.fl_scale_form(pform, 4.0, 4.0)
xfl.fl_adjust_form_size(pform)
xfl.fl_clear_browser(self.pbr)
xfl.fl_add_browser_line(self.pbr, "LOAD A FILE.")
xfl.fl_show_form(pform, xfl.FL_PLACE_FREE, xfl.FL_FULLBORDER, \
"Browser")
while True:
pobj = xfl.fl_do_forms()
if xfl.fl_is_same_object(pobj, pbut):
break
xfl.fl_hide_form(pform)
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fd_scb = self.create_form_scb()
xfl.fl_show_form(self.fd_scb.scb, xfl.FL_PLACE_CENTERFREE, \
xfl.FL_FULLBORDER, "form0")
xfl.fl_do_forms()
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
pform = self.create_form()
MypopupitemA = \
[{'text' : "First item ADD", 'callback' : self.item1_cb, \
'shortcut' : "F", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}, \
{'text' : "Second item ADD", 'callback' : self.item2_cb, \
'shortcut' : "n", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}]
ppopmenu1 = xfl.fls_make_ptr_flpopupitem(MypopupitemA)
entry12 = xfl.fl_add_nmenu_items2(self.pmenu1, ppopmenu1)
MypopupitemB = \
[{'text' : "Third item INS", 'callback' : self.item3_cb, \
'shortcut' : "r", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}, \
{'text' : "Fourth item INS", 'callback' : self.item4_cb, \
'shortcut' : "h", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}]
ppopmenu2 = xfl.fls_make_ptr_flpopupitem(MypopupitemB)
entry34 = xfl.fl_insert_nmenu_items2(self.pmenu1, None, ppopmenu2)
MypopupitemC = {'text' : "Fifth item ADD", 'callback' : self.item5_cb,
'shortcut' : "f", 'type' : xfl.FL_POPUP_NORMAL,
'state' : xfl.FL_POPUP_NONE}
ppopmenu3 = xfl.fls_make_ptr_flpopupitem(MypopupitemC)
entry5 = xfl.fl_add_nmenu_items2(self.pmenu1, ppopmenu3)
MypopupitemD = \
[{'text' : "Sixth item REPL", 'callback' : self.item6_cb, \
'shortcut' : "S", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}, \
{'text' : "Seventh menu REPL", 'callback' : self.item7_cb, \
'shortcut' : "v", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}]
ppopmenu4 = xfl.fls_make_ptr_flpopupitem(MypopupitemD)
entry67 = xfl.fl_replace_nmenu_items2(self.pmenu1, entry12, ppopmenu4)
MypopupitemE = {'text' : "Exit ADD", 'callback' : self.done_cb, \
'shortcut' : "x", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}
ppopmenu5 = xfl.fls_make_ptr_flpopupitem(MypopupitemE)
entry8 = xfl.fl_add_nmenu_items2(self.pmenu1, ppopmenu5)
MypopupitemF = \
[{'text' : "Ninth item ADD", 'callback' : self.item1_cb, \
'shortcut' : "N", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}, \
{'text' : "Tenth item ADD", 'callback' : self.item2_cb, \
'shortcut' : "T", 'type' : xfl.FL_POPUP_NORMAL, \
'state' : xfl.FL_POPUP_NONE}]
ppopmenu6 = xfl.fls_make_ptr_flpopupitem(MypopupitemF)
entry910 = xfl.fl_add_nmenu_items2(self.pmenu2, ppopmenu6)
MypopupitemG = {'text' : "Eleventh item INS", \
'callback' : self.item3_cb, 'shortcut' : "E", \
'type' : xfl.FL_POPUP_NORMAL, 'state' : xfl.FL_POPUP_NONE}
ppopmenu7 = xfl.fls_make_ptr_flpopupitem(MypopupitemG)
entry910 = xfl.fl_insert_nmenu_items2(self.pmenu2, entry910, \
ppopmenu7)
xfl.fl_show_form(pform, xfl.FL_PLACE_CENTER, xfl.FL_TRANSIENT, \
"Nmenu")
while xfl.fl_do_forms():
pass
def __init__(self, lsysargv, sysargv):
self.pdial = [None] * 3
self.ptext = [None] * 3
xfl.fl_initialize(lsysargv, sysargv, "ColorEditor", 0, 0)
self.makeform()
xfl.fl_show_form(self.pform, xfl.FL_PLACE_MOUSE, xfl.FL_TRANSIENT, "Color Editor")
xfl.fl_do_forms()
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
self.TIME = 5
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.makeforms()
xfl.fl_show_form(self.pform1, xfl.FL_PLACE_CENTER, \
xfl.FL_NOBORDER, "Timer")
xfl.fl_set_timer(self.ptim, self.TIME)
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.create_form_form0()
# fill-in form initialization code
# show the first form
xfl.fl_show_form(self.form0, xfl.FL_PLACE_CENTER, \
xfl.FL_FULLBORDER, "form0")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
self.pfclock = None
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", 0, 0)
self.create_form_clock()
xfl.fl_show_form(self.pfclock, xfl.FL_PLACE_CENTER, \
xfl.FL_TRANSIENT, "clocks")
xfl.fl_do_forms()
xfl.fl_finish()
sys.exit(0)
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.ui = self.create_form_inputform()
xfl.fl_register_raw_callback(self.ui.inputform, xfl.KeyPressMask, \
self.peek_event)
xfl.fl_show_form(self.ui.inputform, xfl.FL_PLACE_CENTER, \
xfl.FL_TRANSIENT, "Input")
xfl.fl_do_forms()
xfl.fl_finish()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.create_form()
xfl.fl_set_button(self.pfirstbut, 1)
xfl.fl_show_form(self.pform, xfl.FL_PLACE_CENTER, xfl.FL_NOBORDER, \
"")
while xfl.fl_do_forms():
pass # empty
sys.exit(0)
def __init__(self, lsysargv, sysargv):
xfl.fl_set_border_width(-2)
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", 0, 0)
self.fd_mainform = self.create_form_mainform()
xfl.fl_set_object_return(self.fd_mainform.folder, xfl.FL_RETURN_NONE)
self.make_folder(self.fd_mainform.folder)
# show the first form
xfl.fl_show_form(self.fd_mainform.mainform, xfl.FL_PLACE_ASPECT, xfl.FL_FULLBORDER, "TabFolder")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fdform0 = self.create_form_form0()
# fill-in form initialization code
self.fdform0.ldata = 2800.0
self.start_timer(self.fdform0.timer, 0)
# show the first form
xfl.fl_show_form(self.fdform0.form0, xfl.FL_PLACE_CENTER, xfl.FL_FULLBORDER, "Timer object precision")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fd_ttt = self.create_form_ttt()
xfl.fl_show_form(self.fd_ttt.ttt, xfl.FL_PLACE_CENTER, \
xfl.FL_TRANSIENT, "PixmapBrowser")
xfl.fl_set_fselector_placement(xfl.FL_PLACE_FREE)
xfl.fl_set_fselector_callback(self.load_file, 0)
xfl.fl_show_fselector("Load a Pixmap file", "", "*.x?m", "")
xfl.fl_do_forms()
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.fd_form = self.create_form_form()
# fill-in form initialization code
self.fd_form.ldata = 800
self.start_timer(self.fd_form.report, 0)
# show the first form
xfl.fl_show_form(self.fd_form.form, xfl.FL_PLACE_CENTER, \
xfl.FL_FULLBORDER, "Timeout precision")
xfl.fl_do_forms()
def __init__(self, lsysarg, sysarg):
self.pabox = [0] * 8
xfl.fl_initialize(lsysarg, sysarg, "FormDemo", None, 0)
self.makeform()
xfl.fl_show_form(self.pform, xfl.FL_PLACE_CENTER, xfl.FL_NOBORDER, \
"Push Buttons")
# xfl.fl_do_forms will return only when Exit is pressed
xfl.fl_do_forms()
xfl.fl_finish()
sys.exit(0)
def __init__(self, lsysargv, sysargv):
xfl.fl_initialize(lsysargv, sysargv, "Button", None, 0)
self.fd_x = self.create_form_x()
xfl.fl_show_form(self.fd_x.x, xfl.FL_PLACE_CENTERFREE, \
xfl.FL_FULLBORDER, "strange button")
xfl.fl_do_forms()
if xfl.fl_form_is_visible(self.fd_x.x):
xfl.fl_hide_form(self.fd_x.x)
xfl.fl_finish()
sys.exit(0)
def __init__(self, lsysargv, sysargv):
xfl.fl_flip_yorigin()
xfl.fl_initialize(lsysargv, sysargv, "FormDemo", None, 0)
self.create_form()
xfl.fl_show_form(self.pform, xfl.FL_PLACE_CENTER | xfl.FL_FREE_SIZE, \
xfl.FL_TRANSIENT, "Select Object Demo")
while True:
pobj = xfl.fl_do_forms()
if xfl.fl_is_same_object(pobj, self.preadyobj):
break