def test_unpacking_passive_address(self):
"""Test if passive group addresses are properly unpacked."""
xknx = XKNX()
remote_value_1 = RemoteValue(xknx, group_address=["1/2/3", "1/1/1"])
assert remote_value_1.group_address == GroupAddress("1/2/3")
assert remote_value_1.group_address_state is None
assert remote_value_1.passive_group_addresses == [
GroupAddress("1/1/1")
]
assert remote_value_1.has_group_address(GroupAddress("1/2/3"))
assert remote_value_1.has_group_address(GroupAddress("1/1/1"))
remote_value_2 = RemoteValue(xknx,
group_address_state=["1/2/3", "1/1/1"])
assert remote_value_2.group_address is None
assert remote_value_2.group_address_state == GroupAddress("1/2/3")
assert remote_value_2.passive_group_addresses == [
GroupAddress("1/1/1")
]
assert remote_value_2.has_group_address(GroupAddress("1/2/3"))
assert remote_value_2.has_group_address(GroupAddress("1/1/1"))
remote_value_3 = RemoteValue(
xknx,
group_address=["1/2/3", "1/1/1", "1/1/10"],
group_address_state=["2/3/4", "2/2/2", "2/2/20"],
)
assert remote_value_3.group_address == GroupAddress("1/2/3")
assert remote_value_3.group_address_state == GroupAddress("2/3/4")
assert remote_value_3.passive_group_addresses == [
GroupAddress("1/1/1"),
GroupAddress("1/1/10"),
GroupAddress("2/2/2"),
GroupAddress("2/2/20"),
]
assert remote_value_3.has_group_address(GroupAddress("1/2/3"))
assert remote_value_3.has_group_address(GroupAddress("1/1/1"))
assert remote_value_3.has_group_address(GroupAddress("1/1/10"))
assert remote_value_3.has_group_address(GroupAddress("2/3/4"))
assert remote_value_3.has_group_address(GroupAddress("2/2/2"))
assert remote_value_3.has_group_address(GroupAddress("2/2/20"))
assert not remote_value_3.has_group_address(GroupAddress("0/0/0"))
def test_has_group_address(self):
"""Test has_group_address."""
xknx = XKNX()
scene = Scene(xknx, "TestScene", group_address="1/2/1", scene_number=23)
assert scene.has_group_address(GroupAddress("1/2/1"))
assert not scene.has_group_address(GroupAddress("2/2/2"))
def test_has_group_address(self):
"""Test has_group_address."""
xknx = XKNX(loop=self.loop)
switch = Switch(xknx, "TestOutlet", group_address="1/2/3")
self.assertTrue(switch.has_group_address(GroupAddress("1/2/3")))
self.assertFalse(switch.has_group_address(GroupAddress("2/2/2")))
def test_array_sensor_loop(self):
"""Test sensor and expose_sensor with different values."""
test_cases = [
('absolute_temperature', DPTArray((
0x44,
0xD7,
0xD2,
0x8B,
)), 1726.5795),
('acceleration', DPTArray((
0x45,
0x94,
0xD8,
0x5D,
)), 4763.0454),
('acceleration_angular', DPTArray((
0x45,
0xEA,
0x62,
0x34,
)), 7500.2754),
('activation_energy', DPTArray((
0x46,
0x0,
0x3E,
0xEE,
)), 8207.7324),
('active_energy', DPTArray((
0x26,
0x37,
0x49,
0x7F,
)), 641157503),
('active_energy_kwh', DPTArray((
0x37,
0x5,
0x5,
0xEA,
)), 923076074),
('activity', DPTArray((
0x45,
0x76,
0x0,
0xA3,
)), 3936.0398),
('amplitude', DPTArray((
0x45,
0x9A,
0xED,
0x8,
)), 4957.6289),
('angle', DPTArray((0xE4, )), 322),
('angle_deg', DPTArray((
0x44,
0x5C,
0x20,
0x2B,
)), 880.5026),
('angle_rad', DPTArray((
0x44,
0x36,
0x75,
0x1,
)), 729.8282),
('angular_frequency', DPTArray((
0x43,
0xBC,
0x20,
0x8D,
)), 376.2543),
('angular_momentum', DPTArray((
0xC2,
0x75,
0xB7,
0xB5,
)), -61.4294),
('angular_velocity', DPTArray((
0xC4,
0xD9,
0x10,
0xB3,
)), -1736.5219),
('apparant_energy', DPTArray((
0xD3,
0xBD,
0x1E,
0xA5,
)), -742580571),
('apparant_energy_kvah', DPTArray((
0x49,
0x40,
0xC9,
0x9,
)), 1228982537),
('area', DPTArray((
0x45,
0x63,
0x1E,
0xCD,
)), 3633.9250),
('brightness', DPTArray((
0xC3,
0x56,
)), 50006),
('capacitance', DPTArray((
0x45,
0xC9,
0x1D,
0x9D,
)), 6435.7017),
('charge_density_surface', DPTArray((
0x45,
0xDB,
0x66,
0x99,
)), 7020.8247),
('charge_density_volume', DPTArray((
0xC4,
0x8C,
0x33,
0xD7,
)), -1121.6200),
('color_temperature', DPTArray((
0x6C,
0x95,
)), 27797),
('common_temperature', DPTArray((
0x45,
0xD9,
0xC6,
0x3F,
)), 6968.7808),
('compressibility', DPTArray((
0x45,
0x89,
0x94,
0xAB,
)), 4402.5835),
('conductance', DPTArray((
0x45,
0xA6,
0x28,
0xF9,
)), 5317.1216),
('counter_pulses', DPTArray((0x9D, )), -99),
('current', DPTArray((
0xCA,
0xCC,
)), 51916),
('delta_time_hrs', DPTArray((
0x47,
0x80,
)), 18304),
('delta_time_min', DPTArray((
0xB9,
0x7B,
)), -18053),
('delta_time_ms', DPTArray((
0x58,
0x77,
)), 22647),
('delta_time_sec', DPTArray((
0xA3,
0x6A,
)), -23702),
('density', DPTArray((
0x44,
0xA5,
0xCB,
0x27,
)), 1326.3485),
('electrical_conductivity', DPTArray((
0xC4,
0xC6,
0xF5,
0x6E,
)), -1591.6697),
('electric_charge', DPTArray((
0x46,
0x14,
0xF6,
0xA0,
)), 9533.6562),
('electric_current', DPTArray((
0x45,
0xAD,
0x45,
0x90,
)), 5544.6953),
('electric_current_density', DPTArray((
0x45,
0x7C,
0x57,
0xF6,
)), 4037.4976),
('electric_dipole_moment', DPTArray((
0x45,
0x58,
0xF1,
0x73,
)), 3471.0906),
('electric_displacement', DPTArray((
0xC5,
0x34,
0x8B,
0x0,
)), -2888.6875),
('electric_field_strength', DPTArray((
0xC6,
0x17,
0x1C,
0x39,
)), -9671.0557),
('electric_flux', DPTArray((
0x45,
0x8F,
0x6C,
0xFD,
)), 4589.6235),
('electric_flux_density', DPTArray((
0xC6,
0x0,
0x50,
0xA8,
)), -8212.1641),
('electric_polarization', DPTArray((
0x45,
0xF8,
0x89,
0xC6,
)), 7953.2217),
('electric_potential', DPTArray((
0xC6,
0x18,
0xA4,
0xAF,
)), -9769.1709),
('electric_potential_difference', DPTArray((
0xC6,
0xF,
0x1D,
0x6,
)), -9159.2559),
('electromagnetic_moment', DPTArray((
0x45,
0x82,
0x48,
0xAE,
)), 4169.0850),
('electromotive_force', DPTArray((
0x45,
0xBC,
0xEF,
0xEB,
)), 6045.9897),
('energy', DPTArray((
0x45,
0x4B,
0xB3,
0xF8,
)), 3259.2480),
('enthalpy', DPTArray((
0x76,
0xDD,
)), 287866.88),
('flow_rate_m3h', DPTArray((
0x99,
0xEA,
0xC0,
0x55,
)), -1712668587),
('force', DPTArray((
0x45,
0x9E,
0x2C,
0xE1,
)), 5061.6099),
('frequency', DPTArray((
0x45,
0xC2,
0x3C,
0x44,
)), 6215.5332),
('heatcapacity', DPTArray((
0xC5,
0xB3,
0x56,
0x7E,
)), -5738.8115),
('heatflowrate', DPTArray((
0x44,
0xEC,
0x80,
0x7A,
)), 1892.0149),
('heat_quantity', DPTArray((
0xC5,
0xA6,
0xB6,
0xD5,
)), -5334.8540),
('humidity', DPTArray((
0x7E,
0xE1,
)), 577044.48),
('impedance', DPTArray((
0x45,
0xDD,
0x79,
0x6D,
)), 7087.1782),
('illuminance', DPTArray((
0x7C,
0x5E,
)), 366346.24),
('kelvin_per_percent', DPTArray((
0xFA,
0xBD,
)), -441384.96),
('length', DPTArray((
0xC5,
0x9D,
0xAE,
0xC5,
)), -5045.8462),
('length_mm', DPTArray((
0x56,
0xB9,
)), 22201),
('light_quantity', DPTArray((
0x45,
0x4A,
0xF5,
0x68,
)), 3247.3379),
('long_delta_timesec', DPTArray((
0x45,
0xB2,
0x17,
0x54,
)), 1169299284),
('luminance', DPTArray((
0x45,
0x18,
0xD9,
0x76,
)), 2445.5913),
('luminous_flux', DPTArray((
0x45,
0xBD,
0x16,
0x9,
)), 6050.7544),
('luminous_intensity', DPTArray((
0x46,
0xB,
0xBE,
0x7E,
)), 8943.6230),
('magnetic_field_strength', DPTArray((
0x44,
0x15,
0xF1,
0xAD,
)), 599.7762),
('magnetic_flux', DPTArray((
0xC5,
0xCB,
0x3C,
0x98,
)), -6503.5742),
('magnetic_flux_density', DPTArray((
0x45,
0xB6,
0xBD,
0x42,
)), 5847.6572),
('magnetic_moment', DPTArray((
0xC3,
0x8E,
0x7F,
0x73,
)), -284.9957),
('magnetic_polarization', DPTArray((
0x45,
0x8C,
0xFA,
0xCB,
)), 4511.3491),
('magnetization', DPTArray((
0x45,
0xF7,
0x9D,
0xA2,
)), 7923.7041),
('magnetomotive_force', DPTArray((
0xC6,
0x4,
0xC2,
0xDA,
)), -8496.7129),
('mass', DPTArray((
0x45,
0x8F,
0x70,
0xA4,
)), 4590.0801),
('mass_flux', DPTArray((
0xC6,
0x7,
0x34,
0xFF,
)), -8653.2490),
('mol', DPTArray((
0xC4,
0xA0,
0xF4,
0x68,
)), -1287.6377),
('momentum', DPTArray((
0xC5,
0x27,
0xAA,
0x5B,
)), -2682.6472),
('percent', DPTArray((0xE3, )), 89),
('percentU8', DPTArray((0x6B, )), 107),
('percentV8', DPTArray((0x20, )), 32),
('percentV16', DPTArray((
0x8A,
0x2F,
)), -30161),
('phaseanglerad', DPTArray((
0x45,
0x54,
0xAC,
0x2E,
)), 3402.7612),
('phaseangledeg', DPTArray((
0xC5,
0x25,
0x13,
0x38,
)), -2641.2012),
('power', DPTArray((
0x45,
0xCB,
0xE2,
0x5C,
)), 6524.2949),
('power_2byte', DPTArray((
0x6D,
0x91,
)), 116736.00),
('power_density', DPTArray((
0x65,
0x3E,
)), 54968.32),
('powerfactor', DPTArray((
0xC5,
0x35,
0x28,
0x21,
)), -2898.5081),
('ppm', DPTArray((0xF3, 0xC8)), -176947.20),
('pressure', DPTArray((
0xC5,
0xE6,
0xE6,
0x63,
)), -7388.7983),
('pressure_2byte', DPTArray((
0x7C,
0xF4,
)), 415498.24),
('pulse', DPTArray((0xFC, )), 252),
('rain_amount', DPTArray((0xF0, 0x1)), -335380.48),
('reactance', DPTArray((
0x45,
0xB0,
0x50,
0x91,
)), 5642.0708),
('reactive_energy', DPTArray((
0x1A,
0x49,
0x6D,
0xA7,
)), 441019815),
('reactive_energy_kvarh', DPTArray((
0xCC,
0x62,
0x5,
0x31,
)), -865991375),
('resistance', DPTArray((
0xC5,
0xFC,
0x5F,
0xC2,
)), -8075.9697),
('resistivity', DPTArray((
0xC5,
0x57,
0x76,
0xC3,
)), -3447.4226),
('rotation_angle', DPTArray((
0x2D,
0xDC,
)), 11740),
('scene_number', DPTArray((0x1, )), 2),
('self_inductance', DPTArray((
0xC4,
0xA1,
0xB0,
0x6,
)), -1293.5007),
('solid_angle', DPTArray((
0xC5,
0xC6,
0xE5,
0x47,
)), -6364.6597),
('sound_intensity', DPTArray((
0xC4,
0xF2,
0x56,
0xE6,
)), -1938.7156),
('speed', DPTArray((
0xC5,
0xCD,
0x1C,
0x6A,
)), -6563.5518),
('stress', DPTArray((
0x45,
0xDC,
0xA8,
0xF2,
)), 7061.1182),
('surface_tension', DPTArray((
0x46,
0xB,
0xAC,
0x11,
)), 8939.0166),
('string',
DPTArray((
0x4B,
0x4E,
0x58,
0x20,
0x69,
0x73,
0x20,
0x4F,
0x4B,
0x0,
0x0,
0x0,
0x0,
0x0,
)), "KNX is OK"),
('temperature', DPTArray((
0x77,
0x88,
)), 315883.52),
('temperature_a', DPTArray((
0xF1,
0xDB,
)), -257720.32),
('temperature_difference', DPTArray((
0xC6,
0xC,
0x50,
0xBC,
)), -8980.1836),
('temperature_difference_2byte', DPTArray((
0xA9,
0xF4,
)), -495.36),
('temperature_f', DPTArray((
0x67,
0xA9,
)), 80322.56),
('thermal_capacity', DPTArray((
0x45,
0x83,
0xEA,
0xB3,
)), 4221.3374),
('thermal_conductivity', DPTArray((
0xC5,
0x9C,
0x4D,
0x22,
)), -5001.6416),
('thermoelectric_power', DPTArray((
0x41,
0xCF,
0x9E,
0x4F,
)), 25.9523),
('time_1', DPTArray((
0x5E,
0x1E,
)), 32071.68),
('time_2', DPTArray((
0xFB,
0x29,
)), -405995.52),
('time_period_100msec', DPTArray((
0x6A,
0x35,
)), 27189),
('time_period_10msec', DPTArray((
0x32,
0x3,
)), 12803),
('time_period_hrs', DPTArray((
0x29,
0xDE,
)), 10718),
('time_period_min', DPTArray((
0x0,
0x54,
)), 84),
('time_period_msec', DPTArray((
0x93,
0xC7,
)), 37831),
('time_period_sec', DPTArray((
0xE0,
0xF5,
)), 57589),
('time_seconds', DPTArray((
0x45,
0xEC,
0x91,
0x7C,
)), 7570.1855),
('torque', DPTArray((
0xC5,
0x9,
0x23,
0x5F,
)), -2194.2107),
('voltage', DPTArray((
0x6D,
0xBF,
)), 120504.32),
('volume', DPTArray((
0x46,
0x16,
0x98,
0x43,
)), 9638.0654),
('volume_flow', DPTArray((
0x7C,
0xF5,
)), 415825.92),
('volume_flux', DPTArray((
0xC5,
0x4,
0x2D,
0x72,
)), -2114.8403),
('weight', DPTArray((
0x45,
0x20,
0x10,
0xE8,
)), 2561.0566),
('work', DPTArray((
0x45,
0x64,
0x5D,
0xBE,
)), 3653.8589),
('wind_speed_ms', DPTArray((
0x7D,
0x98,
)), 469237.76),
('wind_speed_kmh', DPTArray((0x7F, 0x55)), 615055.36),
# # Generic DPT Without Min/Max and Unit.
('DPT-5', DPTArray((0x1F)), 31),
('1byte_unsigned', DPTArray((0x08)), 8),
('DPT-7', DPTArray((0xD4, 0x31)), 54321),
('2byte_unsigned', DPTArray((0x30, 0x39)), 12345),
('DPT-8', DPTArray((0x80, 0x44)), -32700),
('2byte_signed', DPTArray((0x00, 0x01)), 1),
('DPT-9', DPTArray((0x2E, 0xA9)), 545.6),
('DPT-12', DPTArray((0x07, 0x5B, 0xCD, 0x15)), 123456789),
('4byte_unsigned', DPTArray((0x00, 0x00, 0x00, 0x00)), 0),
('DPT-13', DPTArray((0x02, 0xE5, 0x5E, 0xF7)), 48586487),
('4byte_signed', DPTArray((0xFD, 0x1A, 0xA1, 0x09)), -48586487),
('DPT-14', DPTArray((0x47, 0xC0, 0xF7, 0x20)), 98798.25),
('4byte_float', DPTArray((0xC2, 0x09, 0xEE, 0xCC)), -34.4832)
]
for value_type, test_payload, test_value in test_cases:
with self.subTest(value_type=value_type):
xknx = XKNX(loop=self.loop)
sensor = Sensor(xknx,
'TestSensor_%s' % value_type,
group_address_state='1/1/1',
value_type=value_type)
expose = ExposeSensor(xknx,
'TestExpose_%s' % value_type,
group_address='2/2/2',
value_type=value_type)
incoming_telegram = Telegram(
GroupAddress('1/1/1'),
TelegramType.GROUP_WRITE,
direction=TelegramDirection.INCOMING,
payload=test_payload)
self.loop.run_until_complete(
asyncio.Task(sensor.process(incoming_telegram)))
incoming_value = sensor.resolve_state()
if isinstance(test_value, float):
self.assertEqual(round(incoming_value, 4), test_value)
else:
self.assertEqual(incoming_value, test_value)
# HA sends strings for new values
stringified_value = str(test_value)
self.loop.run_until_complete(
asyncio.Task(expose.set(stringified_value)))
self.assertEqual(xknx.telegrams.qsize(), 1)
outgoing_telegram = xknx.telegrams.get_nowait()
self.assertEqual(
outgoing_telegram,
Telegram(GroupAddress('2/2/2'),
TelegramType.GROUP_WRITE,
direction=TelegramDirection.OUTGOING,
payload=test_payload))
def test_from_knx_group_address(frame):
"""Test conversion for a cemi with a group address as destination"""
frame.from_knx(get_data(0x29, 0, 0x80, 0, 0, 1, 0, []))
assert frame.dst_addr == GroupAddress(0)
def test_telegram_group_address(frame):
"""Test telegram conversion flags with a group address"""
frame.telegram = Telegram(destination_address=GroupAddress(0))
assert (frame.flags & CEMIFlags.DESTINATION_GROUP_ADDRESS
) == CEMIFlags.DESTINATION_GROUP_ADDRESS
def test_tracker_parser(self):
"""Test parsing tracker options."""
xknx = XKNX()
def _get_only_tracker() -> _StateTracker:
# _workers is unordered so it just works with 1 item
assert len(xknx.state_updater._workers) == 1
_tracker = next(iter(xknx.state_updater._workers.values()))
return _tracker
# INIT
remote_value_init = RemoteValue(
xknx, sync_state="init", group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker().tracker_type == StateTrackerType.INIT
remote_value_init.__del__()
# DEFAULT with int
remote_value_expire = RemoteValue(
xknx, sync_state=2, group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker().tracker_type == StateTrackerType.EXPIRE
assert _get_only_tracker().update_interval == 2 * 60
remote_value_expire.__del__()
# DEFAULT with float
remote_value_expire = RemoteValue(
xknx, sync_state=6.9, group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker().tracker_type == StateTrackerType.EXPIRE
assert _get_only_tracker().update_interval == 6.9 * 60
remote_value_expire.__del__()
# EXPIRE with default time
remote_value_expire = RemoteValue(
xknx,
sync_state="expire",
group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker().tracker_type == StateTrackerType.EXPIRE
assert _get_only_tracker().update_interval == 60 * 60
remote_value_expire.__del__()
# EXPIRE with 30 minutes
remote_value_expire = RemoteValue(
xknx,
sync_state="expire 30",
group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker().tracker_type == StateTrackerType.EXPIRE
assert _get_only_tracker().update_interval == 30 * 60
remote_value_expire.__del__()
# PERIODICALLY with default time
remote_value_every = RemoteValue(
xknx,
sync_state="every",
group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker(
).tracker_type == StateTrackerType.PERIODICALLY
assert _get_only_tracker().update_interval == 60 * 60
remote_value_every.__del__()
# PERIODICALLY 10 * 60 seconds
remote_value_every = RemoteValue(
xknx,
sync_state="every 10",
group_address_state=GroupAddress("1/1/1"))
assert _get_only_tracker(
).tracker_type == StateTrackerType.PERIODICALLY
assert _get_only_tracker().update_interval == 10 * 60
remote_value_every.__del__()
def test_to_knx(self):
"""Test if `GroupAddress.to_knx()` generates valid byte tuples."""
self.assertEqual(GroupAddress("0/0").to_knx(), (0x0, 0x0))
self.assertEqual(GroupAddress("31/2047").to_knx(), (0xFF, 0xFF))
async def test_tunnelling(self):
"""Test tunnelling from KNX bus."""
xknx = XKNX()
communication_channel_id = 23
udp_client = UDPClient(xknx, ("192.168.1.1", 0), ("192.168.1.2", 1234))
telegram = Telegram(
destination_address=GroupAddress("1/2/3"),
payload=GroupValueWrite(DPTArray((0x1, 0x2, 0x3))),
)
sequence_counter = 42
src_address = IndividualAddress("2.2.2")
tunnelling = Tunnelling(
xknx,
udp_client,
telegram,
src_address,
sequence_counter,
communication_channel_id,
)
tunnelling.timeout_in_seconds = 0
assert tunnelling.awaited_response_class == TunnellingAck
assert tunnelling.communication_channel_id == communication_channel_id
# Expected KNX/IP-Frame:
tunnelling_request = TunnellingRequest(
xknx,
communication_channel_id=communication_channel_id,
sequence_counter=sequence_counter,
)
tunnelling_request.cemi.telegram = telegram
tunnelling_request.cemi.src_addr = src_address
exp_knxipframe = KNXIPFrame.init_from_body(tunnelling_request)
with patch("xknx.io.UDPClient.send") as mock_udp_send, patch(
"xknx.io.UDPClient.getsockname") as mock_udp_getsockname:
mock_udp_getsockname.return_value = ("192.168.1.3", 4321)
await tunnelling.start()
mock_udp_send.assert_called_with(exp_knxipframe)
# Response KNX/IP-Frame with wrong type
wrong_knxipframe = KNXIPFrame(xknx)
wrong_knxipframe.init(KNXIPServiceType.CONNECTIONSTATE_REQUEST)
with patch("logging.Logger.warning") as mock_warning:
tunnelling.response_rec_callback(wrong_knxipframe, None)
mock_warning.assert_called_with("Could not understand knxipframe")
# Response KNX/IP-Frame with error:
err_knxipframe = KNXIPFrame(xknx)
err_knxipframe.init(KNXIPServiceType.TUNNELLING_ACK)
err_knxipframe.body.status_code = ErrorCode.E_CONNECTION_ID
with patch("logging.Logger.debug") as mock_warning:
tunnelling.response_rec_callback(err_knxipframe, None)
mock_warning.assert_called_with(
"Error: KNX bus responded to request of type '%s' with error in '%s': %s",
type(tunnelling).__name__,
type(err_knxipframe.body).__name__,
ErrorCode.E_CONNECTION_ID,
)
# Correct Response KNX/IP-Frame:
res_knxipframe = KNXIPFrame(xknx)
res_knxipframe.init(KNXIPServiceType.TUNNELLING_ACK)
tunnelling.response_rec_callback(res_knxipframe, None)
assert tunnelling.success
def test_telegram_equal(self):
"""Test equals operator."""
self.assertEqual(
Telegram(GroupAddress('1/2/3'), TelegramType.GROUP_READ),
Telegram(GroupAddress('1/2/3'), TelegramType.GROUP_READ))
def test_to_knx(self):
"""Test if `GroupAddress.to_knx()` generates valid byte tuples."""
self.assertEqual(GroupAddress('0/0').to_knx(), (0x0, 0x0))
self.assertEqual(GroupAddress('31/2047').to_knx(), (0xff, 0xff))
def __init__(self,
xknx,
name,
group_address_operation_mode=None,
group_address_operation_mode_state=None,
group_address_operation_mode_protection=None,
group_address_operation_mode_night=None,
group_address_operation_mode_comfort=None,
group_address_controller_status=None,
group_address_controller_status_state=None,
group_address_controller_mode=None,
group_address_controller_mode_state=None,
operation_modes=None,
device_updated_cb=None):
"""Initialize ClimateMode class."""
# pylint: disable=too-many-arguments, too-many-locals, too-many-branches, too-many-statements
super().__init__(xknx, name, device_updated_cb)
if isinstance(group_address_operation_mode, (str, int)):
group_address_operation_mode = GroupAddress(
group_address_operation_mode)
if isinstance(group_address_operation_mode_state, (str, int)):
group_address_operation_mode_state = GroupAddress(
group_address_operation_mode_state)
if isinstance(group_address_operation_mode_protection, (str, int)):
group_address_operation_mode_protection = GroupAddress(
group_address_operation_mode_protection)
if isinstance(group_address_operation_mode_night, (str, int)):
group_address_operation_mode_night = GroupAddress(
group_address_operation_mode_night)
if isinstance(group_address_operation_mode_comfort, (str, int)):
group_address_operation_mode_comfort = GroupAddress(
group_address_operation_mode_comfort)
if isinstance(group_address_controller_status, (str, int)):
group_address_controller_status = GroupAddress(
group_address_controller_status)
if isinstance(group_address_controller_status_state, (str, int)):
group_address_controller_status_state = GroupAddress(
group_address_controller_status_state)
if isinstance(group_address_controller_mode, (str, int)):
group_address_controller_mode = GroupAddress(
group_address_controller_mode)
if isinstance(group_address_controller_mode_state, (str, int)):
group_address_controller_mode_state = GroupAddress(
group_address_controller_mode_state)
self.group_address_operation_mode = group_address_operation_mode
self.group_address_operation_mode_state = group_address_operation_mode_state
self.group_address_operation_mode_protection = group_address_operation_mode_protection
self.group_address_operation_mode_night = group_address_operation_mode_night
self.group_address_operation_mode_comfort = group_address_operation_mode_comfort
self.group_address_controller_status = group_address_controller_status
self.group_address_controller_status_state = group_address_controller_status_state
self.group_address_controller_mode = group_address_controller_mode
self.group_address_controller_mode_state = group_address_controller_mode_state
self.operation_mode = HVACOperationMode.STANDBY
self.operation_modes_ = []
if operation_modes is None:
self.operation_modes_ = self.guess_operation_modes()
else:
for mode in operation_modes:
if isinstance(mode, str):
self.operation_modes_.append(HVACOperationMode(mode))
elif isinstance(mode, HVACOperationMode):
self.operation_modes_.append(mode)
self.supports_operation_mode = \
group_address_operation_mode is not None or \
group_address_operation_mode_state is not None or \
group_address_operation_mode_protection is not None or \
group_address_operation_mode_night is not None or \
group_address_operation_mode_comfort is not None or \
group_address_controller_status is not None or \
group_address_controller_status_state is not None or \
group_address_controller_mode is not None or \
group_address_controller_mode_state is not None
def test_address(self):
"""Test string representation of address object."""
address = GroupAddress("1/2/3")
assert repr(address) == 'GroupAddress("1/2/3")'
assert str(address) == "1/2/3"
def test_has_group_address(self):
"""Test sensor has group address."""
xknx = XKNX()
weather = Weather(name="weather", xknx=xknx, group_address_temperature="1/3/4")
self.assertTrue(weather._temperature.has_group_address(GroupAddress("1/3/4")))
self.assertFalse(weather._temperature.has_group_address(GroupAddress("1/2/4")))
def test_has_group_address(self):
"""Test has_group_address."""
xknx = XKNX(loop=self.loop)
switch = Switch(xknx, 'TestOutlet', group_address='1/2/3')
self.assertTrue(switch.has_group_address(GroupAddress('1/2/3')))
self.assertFalse(switch.has_group_address(GroupAddress('2/2/2')))
