コード例 #1
0
ファイル: ScrPartitionManual.py プロジェクト: Tayyib/uludag
    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)

        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)

        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)
コード例 #2
0
    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)
        
        # initialize all storage devices
        if not yali.storage.init_devices():
            raise GUIException, _("Can't find a storage device!")

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)
        
        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)


        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)
コード例 #3
0
class Widget(QWidget, ScreenWidget):

    help = _(
        """
<font size="+2">Partitioning your hard disk</font>

<font size="+1">
<p>
Pardus can be installed on a variety of hardware. You can install Pardus
on an empty disk or hard disk partition. <b>An installation will automatically
destroy the previously saved information on selected partitions. </b>
</p>
<p>
In order to use Pardus, you must create one Linux filesystem (for the 
system files), which is mandatory and a swap space 
(for improved performance), which is optional. This swap space 
is used whenever system needs more memory, but the system lacks it.
We advise you to allocate at least 4 GBs of hard disk area and 
swap space (between 500 MB - 2 GB, according to your needs) for 
convenience. A Linux partition size less than 3.5 GB is not allowed.
You may also optionally use another disk partition for storing 
user files.
</p>
<p>
You need to format a Linux partition, if it's used for the first time.
You can enable \'Use available free space\' option, if the hard disk's 
remaining space is to be used automatically.
</p>
<p>
The partition table shows the device, size, partition type and
filesystem information. If the partition will be formatted during
Pardus installation stage, then the corresponding \'Format\' 
column will be enabled.
</p>
<p>
Please refer to Pardus Installing and Using Guide for more information
about disk partitioning.
</p>
</font>
"""
    )

    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)

        self.connect(self.partlist, PYSIGNAL("signalCreate"), self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"), self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"), self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"), self.slotResizePart)

        self.connect(self.partedit, PYSIGNAL("signalApplied"), self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"), self.slotCanceled)

    def shown(self):
        from os.path import basename

        ctx.debugger.log("%s loaded" % basename(__file__))
        ctx.screens.disableNext()

        self.partlist.update()

    ##
    # do the work and run requested actions on partitions.
    def execute(self):

        # show confirmation dialog
        w = WarningWidget(self)
        self.dialog = WarningDialog(w, self)
        if not self.dialog.exec_loop():
            # disabled by weaver.
            ctx.screens.enablePrev()

            self.partlist.update()
            return False

        # show information window...
        info_window = InformationWindow(self, _("Please wait while formatting!"))

        # commit events
        self.partlist.devices_commit()

        # inform user...
        self.partlist.showPartitionRequests(formatting=True)
        # process events and show partitioning information!
        ctx.screens.processEvents()

        ##
        # check swap partition, if not present use swap file
        rt = request.mountRequestType
        pt = parttype.swap
        swap_part_req = ctx.partrequests.searchPartTypeAndReqType(pt, rt)

        if not swap_part_req:
            # No swap partition defined using swap as file in root
            # partition
            rt = request.mountRequestType
            pt = parttype.root
            root_part_req = ctx.partrequests.searchPartTypeAndReqType(pt, rt)
            ctx.partrequests.append(request.SwapFileRequest(root_part_req.partition(), root_part_req.partitionType()))

        # apply all partition requests
        ctx.partrequests.applyAll()

        # close window
        info_window.close(True)
        return True

    def slotCreatePart(self, parent, d):
        self.partedit.setState(createState, d)
        self.dialog = Dialog(_("Create Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotDeletePart(self, parent, d):
        self.partedit.setState(deleteState, d)
        self.dialog = Dialog(_("Delete Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotEditPart(self, parent, d):
        self.partedit.setState(editState, d)
        self.dialog = Dialog(_("Edit Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotResizePart(self, parent, d):
        self.partedit.setState(resizeState, d)
        self.dialog = Dialog(_("Resize Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotApplied(self):
        self.dialog.done(0)
        self.partlist.update()

    def slotCanceled(self):
        self.dialog.reject()
コード例 #4
0
ファイル: ScrPartitionManual.py プロジェクト: Tayyib/uludag
class Widget(QWidget, ScreenWidget):

    help = _('''
<font size="+2">Partitioning your hard disk</font>

<font size="+1">
<p>
Pardus can be installed on a variety of hardware. You can install Pardus
on an empty disk or hard disk partition. <b>An installation will automatically
destroy the previously saved information on selected partitions. </b>
</p>
<p>
In order to use Pardus, you must create one Linux filesystem (for the 
system files), which is mandatory and a swap space 
(for improved performance), which is optional. This swap space 
is used whenever system needs more memory, but the system lacks it.
We advise you to allocate at least 4 GBs of hard disk area and 
swap space (between 500 MB - 2 GB, according to your needs) for 
convenience. A Linux partition size less than 3.5 GB is not allowed.
You may also optionally use another disk partition for storing 
user files.
</p>
<p>
You need to format a Linux partition, if it's used for the first time.
You can enable \'Use available free space\' option, if the hard disk's 
remaining space is to be used automatically.
</p>
<p>
The partition table shows the device, size, partition type and
filesystem information. If the partition will be formatted during
Pardus installation stage, then the corresponding \'Format\' 
column will be enabled.
</p>
<p>
Please refer to Pardus Installing and Using Guide for more information
about disk partitioning.
</p>
</font>
''')


    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)

        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)

        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)


    def shown(self):
        from os.path import basename
        ctx.debugger.log("%s loaded" % basename(__file__))
        ctx.screens.disableNext()
        self.partlist.update()

    ##
    # do the work and run requested actions on partitions.
    def execute(self):
        ctx.debugger.log("Manual Partitioning selected...")
        ctx.screens.processEvents()
        return True

    def slotCreatePart(self, parent, d):
        self.partedit.setState(createState, d)
        self.dialog = Dialog(_("Create Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotDeletePart(self, parent, d):
        self.partedit.setState(deleteState, d)
        self.dialog = Dialog(_("Delete Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotEditPart(self, parent, d):
        self.partedit.setState(editState, d)
        self.dialog = Dialog(_("Edit Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotResizePart(self, parent, d):
        self.partedit.setState(resizeState, d)
        self.dialog = Dialog(_("Resize Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotApplied(self):
        self.dialog.done(0)
        self.partlist.update()

    def slotCanceled(self):
        self.dialog.reject()
コード例 #5
0
class Widget(QWidget, ScreenWidget):

    help = _('''
<font size="+2">Partitioning your hard disk</font>

<font size="+1">
<p>
Pardus can be installed on a variety of hardware. You can install Pardus
on an empty disk or hard disk partition. <b>An installation will automatically
destroy the previously saved information on selected partitions. </b>
</p>
<p>
In order to use Pardus, you must create one Linux filesystem (for the 
system files), which is mandatory and a swap space 
(for improved performance), which is optional. 
We advise you to allocate at least 4 GBs of hard disk area and 
swap space (between 500 MB - 2 GB, according to your needs) for 
convenience. A Linux partition size less than 2.5 GB is not allowed.
You may also optionally use another disk partition for storing 
user files.
</p>
<p>
You need to format a Linux partition, if it's used for the first time.
You can enable \'Use available free space\' option, if the hard disk's 
remaining space is to be used automatically.
</p>
<p>
The partition table shows the device, size, partition type and
filesystem information. If the partition will be formatted during
Pardus installation stage, then the corresponding \'Format\' 
column will be enabled.
</p>
<p>
Please refer to Pardus Installing and Using Guide for more information
about disk partitioning.
</p>
</font>
''')


    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)
        
        # initialize all storage devices
        if not yali.storage.init_devices():
            raise GUIException, _("Can't find a storage device!")

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)
        
        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)


        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)


    def shown(self):
        ctx.screens.enablePrev()

        self.partlist.update()

    ##
    # do the work and run requested actions on partitions.
    def execute(self):

        # show confirmation dialog
        w = WarningWidget(self)
        self.dialog = WarningDialog(w, self)
        if not self.dialog.exec_loop():
            return False


        # commit events
        self.partlist.devices_commit()

        # inform user...
        self.partlist.showPartitionRequests(formatting=True)
        # process events and show partitioning information!
        ctx.screens.processEvents()
        ctx.screens.processEvents()
        
        
        ##
        # check swap partition, if not present use swap file
        rt = request.mountRequestType
        pt = parttype.swap
        found_swap_part = [x for x in ctx.partrequests.searchPartTypeAndReqType(pt, rt)]
        # this should give (at most) one result
        # cause we are storing one request for a partitionType()
        assert(len(found_swap_part) <= 1)


        if not found_swap_part:
            print "no swap partition defined using swap as file..."
            # find root partition
            rt = request.mountRequestType
            pt = parttype.root
            for r in ctx.partrequests.searchPartTypeAndReqType(pt, rt):
                ctx.partrequests.append(
                    request.SwapFileRequest(r.partition(), r.partitionType()))

        # apply all partition requests
        ctx.partrequests.applyAll()

        return True


    def slotCreatePart(self, parent, d):
        self.partedit.setState(createState, d)
        self.dialog = Dialog(_("Create Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotDeletePart(self, parent, d):
        self.partedit.setState(deleteState, d)
        self.dialog = Dialog(_("Delete Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotEditPart(self, parent, d):
        self.partedit.setState(editState, d)
        self.dialog = Dialog(_("Edit Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotResizePart(self, parent, d):
        self.partedit.setState(resizeState, d)
        self.dialog = Dialog(_("Resize Partition"), self.partedit, self)
        self.dialog.exec_loop()


    def slotApplied(self):
        self.dialog.done(0)
        self.partlist.update()

    def slotCanceled(self):
        self.dialog.reject()
コード例 #6
0
class Widget(QWidget, ScreenWidget):

    help = _('''
<font size="+2">Partitioning your hard disk</font>

<font size="+1">
<p>
Pardus can be installed on a variety of hardware. You can install Pardus
on an empty disk or hard disk partition. <b>An installation will automatically
destroy the previously saved information on selected partitions. </b>
</p>
<p>
In order to use Pardus, you must create one Linux filesystem (for the 
basic files and folders) and a swap space (for improved performance). 
We advise you to allocate at least 4 GBs of hard disk area and 
swap space (between 500 MB - 2 GB, according to your needs) for 
convenience. A Linux partition size less than 2.5 GB is not allowed.
</p>
<p>
Please refer to Pardus Installing and Using Guide for more information
about disk partitioning.
</p>
</font>
''')


    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)
        
        # initialize all storage devices
        yali.storage.init_devices()

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.partedit.hide()
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)
        
        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)


        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)


    def shown(self):
        ctx.screens.enablePrev()

        self.partlist.update()

    ##
    # do the work and run requested actions on partitions.
    def execute(self):

        # inform user...
        self.partlist.showPartitionRequests(formatting=True)
        # process events and show partitioning information!
        ctx.screens.processEvents()

        
        ##
        # check swap partition, if not present use swap file
        rt = request.mountRequestType
        pt = parttype.swap
        found_swap_part = [x for x in ctx.partrequests.searchPartTypeAndReqType(pt, rt)]
        # this should give (at most) one result
        # cause we are storing one request for a partitionType()
        assert(len(found_swap_part) <= 1)


        if not found_swap_part:
            print "no swap partition defined using swap as file..."
            # find root partition
            for r in ctx.partrequests.searchReqType(request.mountRequestType):
                ctx.partrequests.append(
                    request.SwapFileRequest(r.partition(), r.partitionType()))

        # apply all partition requests
        ctx.partrequests.applyAll()


    def slotCreatePart(self, parent, d):
        self.partedit.setState(createState, d)
        self.dialog = Dialog(_("Create Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotDeletePart(self, parent, d):
        self.partedit.setState(deleteState, d)
        self.dialog = Dialog(_("Delete Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotEditPart(self, parent, d):
        self.partedit.setState(editState, d)
        self.dialog = Dialog(_("Edit Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotResizePart(self, parent, d):
        self.partedit.setState(resizeState, d)
        self.dialog = Dialog(_("Resize Partition"), self.partedit, self)
        self.dialog.exec_loop()


    def slotApplied(self):
        self.dialog.done(0)
        del self.dialog
        self.partlist.update()

    def slotCanceled(self):
        self.dialog.reject()
        del self.dialog
コード例 #7
0
class Widget(QWidget, ScreenWidget):

    help = _('''
<font size="+2">Partitioning your hard disk</font>

<font size="+1">
<p>
Pardus can be installed on a variety of hardware. You can install Pardus
on an empty disk or hard disk partition. <b>An installation will automatically
destroy the previously saved information on selected partitions. </b>
</p>
<p>
In order to use Pardus, you must create one Linux filesystem (for the 
basic files and folders) and a swap space (for improved performance). 
We advise you to allocate at least 4 GBs of hard disk area and 
swap space (between 500 MB - 2 GB, according to your needs) for 
convenience. A Linux partition size less than 2.5 GB is not allowed.
</p>
<p>
Please refer to Pardus Installing and Using Guide for more information
about disk partitioning.
</p>
</font>
''')


    def __init__(self, *args):
        apply(QWidget.__init__, (self,) + args)
        
        # initialize all storage devices
        yali.storage.init_devices()

        self.partlist = PartList(self)
        self.partedit = PartEdit(self)
        self.dialog = None

        vbox = QVBoxLayout(self)
        vbox.addWidget(self.partlist)
        
        self.connect(self.partlist, PYSIGNAL("signalCreate"),
                     self.slotCreatePart)

        self.connect(self.partlist, PYSIGNAL("signalDelete"),
                     self.slotDeletePart)

        self.connect(self.partlist, PYSIGNAL("signalEdit"),
                     self.slotEditPart)

        self.connect(self.partlist, PYSIGNAL("signalResize"),
                     self.slotResizePart)


        self.connect(self.partedit, PYSIGNAL("signalApplied"),
                     self.slotApplied)

        self.connect(self.partedit, PYSIGNAL("signalCanceled"),
                     self.slotCanceled)


    def shown(self):
        ctx.screens.prevEnabled()

        self.partlist.update()

    ##
    # do the work and run requested actions on partitions.
    def execute(self):

        # inform user...
        self.partlist.showPartitionRequests(formatting=True)
        # process events and show partitioning information!
        ctx.screens.processEvents()

        # apply all partition requests
        ctx.partrequests.applyAll()


    def slotCreatePart(self, parent, d):
        self.partedit.setState(createState, d)
        self.dialog = Dialog(_("Create Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotDeletePart(self, parent, d):
        self.partedit.setState(deleteState, d)
        self.dialog = Dialog(_("Delete Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotEditPart(self, parent, d):
        self.partedit.setState(editState, d)
        self.dialog = Dialog(_("Edit Partition"), self.partedit, self)
        self.dialog.exec_loop()

    def slotResizePart(self, parent, d):
        self.partedit.setState(resizeState, d)
        self.dialog = Dialog(_("Resize Partition"), self.partedit, self)
        self.dialog.exec_loop()


    def slotApplied(self):
        self.dialog.done(0)
        del self.dialog
        self.partlist.update()

    def slotCanceled(self):
        self.dialog.reject()
        del self.dialog