def print_label(self):
z = zebra(zebra().getqueues()[0])
if self.packing < 2:
packing_title = "Quantity"
packing_text = "{} item in a box"
else:
packing_title = "Packaging Units"
packing_text = "{} of {}"
for i in range(1, self.packing + 1):
#print(packing_title, packing_text.format(i, self.packing))
pc = '^FT195,325^ARB,28,40^FH\^FD{0}^FS\n^FT246,325^AUB,28,40^FH\^FD{1}^FS'.format(
packing_title, packing_text.format(i, self.packing))
lbl = self.__make_label() + pc + '^XZ'
print(lbl)
z.output(lbl)
def send_epl_data(self, cr, uid, ids, context=None):
z = zebra()
printer = self.get_default_label_printer(cr, uid, ids, context=context)
conf_obj = self.pool.get('qz.config')
conf_id = conf_obj.search(cr, uid,
[('qz_printer.system_name', '=', printer)])
z.setqueue(printer)
if conf_id:
for x in conf_obj.browse(cr, uid, conf_id):
thermal = x.qz_direct_thermal
h = x.qz_label_height
gap = x.qz_label_gap
height = [h, gap]
width = x.qz_label_width
z.setup(direct_thermal=thermal,
label_height=height,
label_width=width)
epl = self.prepare_epl_data(cr, uid, ids, context=context)
partial_pick_obj = self.pool.get('stock.partial.line')
line_ids = context.get('line_id', []) or []
partial_ids = partial_pick_obj.search(cr, uid,
[('wizard_id', '=', ids),
('id', '=', line_ids)])
partial = partial_pick_obj.browse(cr,
uid,
partial_ids,
context=context)
for line in partial:
num_cop = int(line.quantity)
for n in range(0, num_cop):
z.output(epl)
## sleep between labels, if not, printer die ;)
sleep(1.3)
return True
def print_oneline_zebra():
PIDtoprint = e2.get()
txttoprint = "printonelinzebrafunction"
print(txttoprint)
txttoprint = gettxttoprint(txttoprint, PIDtoprint)
print(txttoprint)
n_printer = v.get()
printer_name = printer_names[n_printer]
# test to see if it knowns the right printer.
print("Using %s" % printer_name)
print(txttoprint)
print(PIDtoprint)
#Set up the printer and go!
z = zebra()
z.setqueue(printer_name)
label = """
N
B50,25,0,1,2,6,34,B,"%s"
A200,60,0,2,1,1,N,"EA PID"
A50,3,0,2,1,1,N,"%s"
P1
""" % (PIDtoprint, txttoprint)
#End of EPL commands to print PID tag
z.setqueue(printer_name)
z.output(label)
print("Print Complete")
return
def send_epl_data(self, cr, uid, ids, context=None):
z = zebra()
queue = self.get_queue(cr, uid, context=context)
z.setqueue(queue)
conf_obj = self.pool.get('qz.config')
conf_id = conf_obj.search(cr, uid, [('qz_default', '=', 1)])
if conf_id:
for x in conf_obj.browse(cr, uid, conf_id):
thermal = x.qz_direct_thermal
h = x.qz_label_height
gap = x.qz_label_gap
height = [h, gap]
width = x.qz_label_width
z.setup(direct_thermal=thermal, label_height=height, label_width=width)
epl = self.prepare_epl_data(cr, uid, ids, context=context)
partial_pick_obj = self.pool.get('stock.partial.picking.line')
line_ids = context.get('line_id', []) or []
partial_ids = partial_pick_obj.search(cr, uid, [('wizard_id', '=', ids), ('id', '=', line_ids)])
partial = partial_pick_obj.browse(cr, uid, partial_ids, context=context)
for line in partial:
num_cop = int(line.quantity)
for n in range(0, num_cop):
z.output(epl)
## sleep between labels, if not, printer die ;)
sleep(1.3)
return True
def send_epl_data(self, cr, uid, ids, context=None):
z = zebra()
printer = self.get_default_label_printer(cr, uid, ids, context=context)
conf_obj = self.pool.get('qz.config')
conf_id = conf_obj.search(cr, uid,
[('qz_printer.system_name', '=', printer)])
z.setqueue(printer)
if conf_id:
for x in conf_obj.browse(cr, uid, conf_id):
thermal = x.qz_direct_thermal
h = x.qz_label_height
gap = x.qz_label_gap
height = [h, gap]
width = x.qz_label_width
z.setup(direct_thermal=thermal,
label_height=height,
label_width=width)
epl = self.prepare_epl_data(cr, uid, ids, context=context)
for data in self.browse(cr, uid, ids, context=context):
num_cop = data.copies
splited = epl.split('____')
for label in splited:
for n in range(0, num_cop):
z.output(label)
## sleep between labels, if not, printer die ;)
sleep(1.2)
return True
def print_zebra(self,
member_id,
name_str="Member Name",
member_type_str="Member_type",
dry_run=False):
printer = zebra()
z_design = """CT~~CD,~CC^~CT~
^XA~TA000~JSN^LT0^MNW^MTD^PON^PMN^LH0,0^JMA^PR6,6~SD15^JUS^LRN^CI0^XZ
^XA
^MMT
^PW406
^LL0203
^LS0
^BY3,3,54^FT20,0^BCN,,N,N
^FD>;""" + str(member_id) + """^FS
^FT8,147^A0N,100,60^FH\^FD""" + name_str[0:14] + """^FS
^FT140,187^A0N,28,28^FH\^FD""" + member_type_str[0:12] + """^FS
^PQ1,0,1,Y^XZ
"""
if dry_run:
print('Printer queues found:', printer.getqueues())
print("ZPL Doc: ")
print(z_design)
else:
testing = printer.getqueues()
printer.setqueue(config.zebra_printer_name)
printer.setup(direct_thermal=True,
label_height=(203, 32),
label_width=406) # 2" x 1" direct thermal label
printer.output(z_design)
def printerRefresh_cb(self):
self.printers_list.delete(0, self.printers_list.size())
z = zebra()
printers = z.getqueues()
del z
for port in range(len(printers)):
self.printers_list.insert(Tkinter.END, printers[port])
def send_epl_data(self, cr, uid, ids, context=None):
z = zebra()
printer = self.get_default_label_printer(cr, uid, ids, context=context)
conf_obj = self.pool.get('qz.config')
conf_id = conf_obj.search(cr, uid, [('qz_printer.system_name', '=', printer)])
z.setqueue(printer)
if conf_id:
for x in conf_obj.browse(cr, uid, conf_id):
thermal = x.qz_direct_thermal
h = x.qz_label_height
gap = x.qz_label_gap
height = [h, gap]
width = x.qz_label_width
z.setup(direct_thermal=thermal, label_height=height, label_width=width)
epl = self.prepare_epl_data(cr, uid, ids, context=context)
for data in self.browse(cr, uid, ids, context=context):
num_cop = data.copies
splited = epl.split('____')
for label in splited:
for n in range(0, num_cop):
z.output(label)
## sleep between labels, if not, printer die ;)
sleep(1.4)
return True
def __init__(self):
self.builder = Gtk.Builder()
self.builder.add_from_file("Glade_Print_Counter.glade")
self.window = self.builder.get_object("PrinterWindow")
closeBtn = self.builder.get_object("CloseBtn")
printBtn = self.builder.get_object("PrintBtn")
printNumBtn = self.builder.get_object("PrintNumBtn")
self.pauseBtn = self.builder.get_object("PauseBtn")
self.pauseFlag = False#if this flag set to true, then printing will be paused
closeBtn.connect("clicked", self.quit)
self.pauseBtn.connect("clicked", self.pause)
#closeBtn.connect("clicked", self.debug_quit)#for debug
self.window.connect("destroy", self.quit)
if zebraFound == True:
printNumBtn.connect("clicked", self.print_number)
self.z = zebra('Zebra-Technologies-ZTC-GK420d')
if(type(self.z) is zebra):
printBtn.connect("clicked", self.printing_process)
else:
print("Printer wasn't detected! Output will be in terminal.\n")
printBtn.connect("clicked", self.virtual_print)
else:
printBtn.connect("clicked", self.virtual_print)#for debug or emulation mode
#Restoring "Printed" last value
printed_entry = self.builder.get_object("Printed")
try:#opening file with "Printed" last value
printedFile = open("./printed.txt", 'r')
printed = int(printedFile.read())
printedFile.close()
printed_entry.set_text(str(printed))
except:
print("printed.txt not found! New one will be created!\n")
self.window.show_all()
def print_lab(label,printer): label = label z = zebra([]) p = z.getqueues() #print p #This will return a list of printers installed on your computer. z.setqueue(printer) #Set the default printer to your new ZPL printer z.output(label) #Have fun sending data to your printer.It's as easy as it can get. :)
def __init__(self, Body=" ", Printer="Zebra", Copies=1, Direct=True, **kwargs):
self.z=zebra()
for q in self.z.getqueues():
if re.search(Printer, q):
print(q)
self.z.setqueue(q)
#Label absolute 0 offset
LabelOffsetXY=[10,20]
Prefix="^XA~TA000~JSN^LT0^MNW^MT{}^LH{},{}^PON^PMN^XZ".format(("T", "D")[Direct],
LabelOffsetXY[0], LabelOffsetXY[1])
LblTxt="{}^XA{}^PQ{}^XZ".format(Prefix, Template(Body).safe_substitute(kwargs), Copies)
l=LblTxt
def printlabel(device, deviceid, imei, amount):
i = 1
while i <= int(amount):
printFile = open("Template.txt", "r")
printer = zebra(device)
lines = printFile.readlines()
lineStr = "".join(lines)
lineStr = lineStr.replace("{DEVICEID}", deviceid).replace("{IMEI}", imei).replace("{FIRMWARE}", getFirmware()).replace("{PACKAGE}", getPackage())
printer.output(lineStr)
time.sleep(2)
i += 1
printFile.close()
def gen_zpl(sender, receiver, dt, code):
zpl = "^XA^PR12^LRY^MD30^PW440^LL400^PON^CFd0,50,15^FO0,20^FB440,2,0,C^FD" + str(
receiver)
zpl += "^FS^CFd0,30,18^FO5,85^FDSender:^FS^CF00,70,30^FO5,120^FB440,1,0,L^FD" + str(
sender)
zpl += "^FS^CF00,30,30^FO0,190^FB440,1,0,C^FD" + str(dt).split('.')[0]
zpl += "^FS^FO100,210^BQN,2,9^FDQA," + str(code)
zpl += "^FS^PQ1^XZ"
print(zpl)
#sendip('10.17.204.201',zpl)
z = zebra("Zebra ZP 500 (EPL)")
z.output(zpl)
def detect_printer():
""" Basic automated check to see if a printer is connected or not.
This code has been tested on a Windows machine and a Raspberry Pi
(Ubuntu).
"""
z = zebra()
# Identify which operating system is being used and find the printer
printer_present = False
system_name = os.name
if system_name == "nt":
print("Running on Windows...", end=" ")
from infi.devicemanager import DeviceManager
import win32print
# Identify if a Zebra printer is connected and available
printer_queues = []
for (a, b, name,
d) in win32print.EnumPrinters(win32print.PRINTER_ENUM_LOCAL):
printer_queues.append(name)
dm = DeviceManager()
devices = dm.all_devices
for dev in devices:
if 'ZDesigner' in dev.description:
if dev.children[0].friendly_name in printer_queues:
print("found printer: {}".format(
dev.children[0].friendly_name))
z.setqueue(dev.children[0].friendly_name)
printer_present = True
break
elif system_name == "posix":
print("Running on Raspberry Pi... configure printer setting:")
try:
printers = [
device for device in z.getqueues() if 'GK420' in device
]
print("")
for i, printer in enumerate(printers):
print(" {}: {}".format(i, printer))
z.setqueue(printers[PI_PRINTER_SELECTION])
print("Connected to: {}".format(printers[PI_PRINTER_SELECTION]))
printer_present = True
except:
print("Check that 'PI_PRINTER_SELECTION' is correctly configured.")
printer_present = False
return z
def printerConnect_cb(self):
index = self.printers_list.curselection()
if index:
printer = self.printers_list.get(index)
self.logger.info("Connecting: " + printer)
try:
self.ZebraPrinter = zebra()
except:
self.logger.warn("Error has occurred")
else:
self.ZebraPrinter.setqueue(printer)
self.printerConnect_btn.config(state="disable")
self.printerDisconnect_btn.config(state="normal")
else:
self.logger.warn("Wrong printer selected")
def TestPrinter(self):
index = self.printers_list.curselection()
if index:
printer = self.printers_list.get(index)
self.logger.info("Connecting: " + printer)
try:
from zebra import zebra
z = zebra()
z.setqueue(printer)
except:
self.logger.warn("Error has occurred")
else:
self.logger.info("Printing label test: Hello World")
z.output(CreateLabel("0"))
else:
self.logger.warn("Wrong printer selected")
def __init__(self, queue=1):
self.zebra=zebra()
self.lblText=''
try:
self.zebra.setqueue(self.zebra.getqueues()[queue])
except:
logging.debug('Queue {} not found!'.format(queue))
sys.exit(1)
try:
fl='{}/{}'.format(os.path.dirname(os.path.abspath(sys.argv[0])),LBL_FILE)
with open(fl) as f:
self.lblText=f.read()
logging.debug('Reading from {}'.format(fl))
except:
logging.debug('Error reading from {}. Using defaults'.format(LBL_FILE))
self.lblText='''
^XA
#label darkness 0-30
~SD10
#label offset width,height
^LH20,10^MTT
^FO0,0
^AS
^FDEGL^FS
^FO0,35
^AQ
^FD$hostName ^FS
^FO30,150
^AS
^FD$barCode^FS
^FO0,65
^GB200,2,2
^FS
^BY2,3,105
^FT20,150
^BCN,80,N,N
^FD>;$barCode^FS
^PQ$numCopies
^XZ
'''
self.lblSave()
def _SendToPrinter(self, epl_code):
from zebra import zebra
zebra = zebra(self._printer_name)
zebra.output(epl_code)
def lblPrint(self, barCode="12345678", numCopies=1):
t=Template(self.lblText)
#print(self.__cleanBc(barCode))
lblStr=t.substitute(hostName=socket.gethostname(), barCode=self.__cleanBc(barCode), numCopies=numCopies)
self.zebra.output(lblStr)
def __cleanBc(self, barCode):
b=[]
for s in barCode:
if 32 <= ord(s) <=127:
b += s
return("".join(b))
if __name__ == '__main__':
z=zebra()
zQueues=z.getqueues()
q=0
i=0
if(len(zQueues))==1:
z.setqueue(zQueues[0])
logging.debug('Printer: {}'.format(zQueues[0]))
else:
for q in zQueues:
i+=1
print('{}. {}'.format(i,q))
try:
q=input('Select printer ({}):'.format(i))
except:
q=i
if not 0 <= q-1 <= i-1:
#!/usr/bin/env python
import sys
import csv
from zebra import zebra
z = zebra('Zebra')
z.setqueue('Zebra_Technologies_ZTC_ZT410-203dpi_ZPL')
z.setup(direct_thermal=None, label_height=(100, 24), label_width=(500))
data = []
with open(sys.argv[2]) as csvfile:
file = csv.reader(csvfile)
for row in file:
data.append(row)
for i in range(len(data)):
label = """^XA
^LH0,0 ^FO1,20^BY%s
^BCN,30,Y,N,N
^FD%s^FS
^XZ""" % (sys.argv[1], data[i][0])
z.output(label)
def __init__(self, top=None):
self.printer_object = zebra()
'''This class configures and populates the toplevel window.
top is the toplevel containing window.'''
_bgcolor = '#d9d9d9' # X11 color: 'gray85'
_fgcolor = '#000000' # X11 color: 'black'
_compcolor = '#d9d9d9' # X11 color: 'gray85'
_ana1color = '#d9d9d9' # X11 color: 'gray85'
_ana2color = '#d9d9d9' # X11 color: 'gray85'
font10 = "-family {Helvetica Neue} -size 13 -weight bold -slant " \
"roman -underline 0 -overstrike 0"
font11 = "-family {Helvetica Neue} -size 7 -weight normal " \
"-slant roman -underline 0 -overstrike 0"
top.geometry("600x400+343+138")
top.title("Mercury Badges")
top.configure(background="#F8F7FA")
top.configure(highlightbackground="#d9d9d9")
top.configure(highlightcolor="black")
self.PrinterSelectionCanvas = tk.Canvas(top)
self.PrinterSelectionCanvas.place(
relx=0.008,
rely=0.013,
relheight=0.975,
relwidth=0.983,
)
self.PrinterSelectionCanvas.configure(background="#F8F7FA")
self.PrinterSelectionCanvas.configure(highlightbackground="#d9d9d9")
self.PrinterSelectionCanvas.configure(highlightcolor="black")
self.PrinterSelectionCanvas.configure(insertbackground="black")
self.PrinterSelectionCanvas.configure(selectbackground="#c4c4c4")
self.PrinterSelectionCanvas.configure(selectforeground="black")
self.PrinterSelectionCanvas.configure(width=283)
self.log_label = tk.Text(self.PrinterSelectionCanvas)
self.wl = WidgetLogger(self.log_label)
self.log_label.place(
relx=0.034,
rely=0.564,
height=144,
width=415,
)
self.log_label.configure(background="#ffffff")
self.log_label.configure(foreground="#000000")
self.log_label.configure(highlightbackground="#d9d9d9")
self.log_label.configure(highlightcolor="black")
self.log_label.configure(state=tk.DISABLED)
self.printer_radio_buttons = []
self.populate_radio_buttons()
self.choose_printer_label = tk.Label(self.PrinterSelectionCanvas)
self.choose_printer_label.place(
relx=0.068,
rely=0.077,
height=24,
width=122,
)
self.choose_printer_label.configure(activebackground="#f9f9f9")
self.choose_printer_label.configure(activeforeground="black")
self.choose_printer_label.configure(background="#F8F7FA")
self.choose_printer_label.configure(foreground="#000000")
self.choose_printer_label.configure(highlightbackground="#d9d9d9")
self.choose_printer_label.configure(highlightcolor="black")
self.choose_printer_label.configure(text='''Choose a printer:''')
self.disclaimer_label = tk.Label(self.PrinterSelectionCanvas)
self.disclaimer_label.place(
relx=0.042,
rely=0.949,
height=7,
width=221,
)
self.disclaimer_label.configure(activebackground="#f9f9f9")
self.disclaimer_label.configure(activeforeground="black")
self.disclaimer_label.configure(background="#F8F7FA")
self.disclaimer_label.configure(font=font11)
self.disclaimer_label.configure(foreground="#000000")
self.disclaimer_label.configure(highlightbackground="#d9d9d9")
self.disclaimer_label.configure(highlightcolor="black")
self.disclaimer_label.configure(
text='''Disclaimer: This app was designed\
to support only Zebra printers.''')
self.start_button = tk.Button(
self.PrinterSelectionCanvas,
command=self.configure_printer,
)
self.start_button.place(
relx=0.746,
rely=0.233,
height=22,
width=125,
)
self.start_button.configure(activebackground="#d9d9d9")
self.start_button.configure(activeforeground="#000000")
self.start_button.configure(background="#d9d9d9")
self.start_button.configure(foreground="#000000")
self.start_button.configure(highlightbackground="#d9d9d9")
self.start_button.configure(highlightcolor="black")
self.start_button.configure(relief='raised')
self.start_button.configure(text='''Connect printer''')
self.printer_id_label = tk.Label(self.PrinterSelectionCanvas)
self.printer_id_label.place(
relx=0.797,
rely=0.077,
height=24,
width=71,
)
self.printer_id_label.configure(activebackground="#f9f9f9")
self.printer_id_label.configure(activeforeground="black")
self.printer_id_label.configure(background="#F8F7FA")
self.printer_id_label.configure(foreground="#000000")
self.printer_id_label.configure(highlightbackground="#d9d9d9")
self.printer_id_label.configure(highlightcolor="black")
self.printer_id_label.configure(text='''Printer ID''')
self.printer_id = tk.Text(self.PrinterSelectionCanvas)
self.printer_id.place(
relx=0.746,
rely=0.128,
relheight=0.056,
relwidth=0.212,
)
self.printer_id.configure(background="white")
self.printer_id.configure(font="TkTextFont")
self.printer_id.configure(foreground="black")
self.printer_id.configure(highlightbackground="#d9d9d9")
self.printer_id.configure(highlightcolor="black")
self.printer_id.configure(insertbackground="black")
self.printer_id.configure(selectbackground="#c4c4c4")
self.printer_id.configure(selectforeground="black")
self.printer_id.configure(width=108)
self.printer_id.configure(wrap='word')
self.restore_connection_details()
self.static_status_label = tk.Label(self.PrinterSelectionCanvas)
self.static_status_label.place(
relx=0.811,
rely=0.31,
height=30,
width=52,
)
self.static_status_label.configure(activebackground="#f9f9f9")
self.static_status_label.configure(activeforeground="black")
self.static_status_label.configure(background="#F8F7FA")
self.static_status_label.configure(font=font10)
self.static_status_label.configure(foreground="#000000")
self.static_status_label.configure(highlightbackground="#d9d9d9")
self.static_status_label.configure(highlightcolor="black")
self.static_status_label.configure(text='''Status''')
self.status_label = tk.Label(self.PrinterSelectionCanvas)
self.status_label.place(relx=0.775, rely=0.362, height=24, width=97)
self.status_label.configure(activebackground="#f9f9f9")
self.status_label.configure(activeforeground="black")
self.status_label.configure(background="#F8F7FA")
self.status_label.configure(foreground="#000000")
self.status_label.configure(highlightbackground="#d9d9d9")
self.status_label.configure(highlightcolor="black")
self.status_label.configure(text='''Disconnected''')
self.refresh_printer_button = tk.Button(self.PrinterSelectionCanvas)
self.refresh_printer_button.place(
relx=0.110,
rely=0.154,
height=22,
width=80,
)
self.refresh_printer_button.configure(activebackground="#F8F7FA")
self.refresh_printer_button.configure(activeforeground="#F8F7FA")
self.refresh_printer_button.configure(background="#F8F7FA")
self.refresh_printer_button.configure(foreground="#000000")
self.refresh_printer_button.configure(highlightbackground="#d9d9d9")
self.refresh_printer_button.configure(highlightcolor="black")
self.refresh_printer_button.configure(text='''Refresh''')
self.refresh_printer_button.configure(
command=self.refresh_radio_buttons, )
self.test_printer_button = tk.Button(self.PrinterSelectionCanvas)
self.test_printer_button.place(
relx=0.093,
rely=0.22,
height=22,
width=100,
)
self.test_printer_button.configure(activebackground="#F8F7FA")
self.test_printer_button.configure(activeforeground="#F8F7FA")
self.test_printer_button.configure(background="#F8F7FA")
self.test_printer_button.configure(foreground="#000000")
self.test_printer_button.configure(highlightbackground="#d9d9d9")
self.test_printer_button.configure(highlightcolor="black")
self.test_printer_button.configure(text='''Test Printer''')
self.test_printer_button.configure(command=self.test_printer)
import sys
import glob
import serial
from zebra import zebra
import datetime
# seriall = serial.Serial("/dev/cu.UC-232AC1", baudrate=115200)
barcodeprinter = zebra("Barcode3")
labeltoprint = """
^XA
^MD30
^FO400,50^BY3^B3,N,50,N,N^FD41000523^FS
^FO400,120^A0,30,40^FDDevice ID 41000523^FS
^FO400,165^BY2^B3,N,50,N,N^FD013796001346517^FS
^FO400,245^A0,30,40^FDIMEI 013796001346517^FS
^FO400,300^A0,24,26^FDEngenX, LLC^FS
^FO400,325^A0,24,26^FD(812) 759-6900^FS
^FO760,300^A0,24,26^FDF/W:
20.2.2.56^FS
^FO760,325^A0,24,26^FDPKG: 2-D8^FS
^PQ1
^XZ"""
barcodeprinter.output(labeltoprint)
# if seriall.isOpen():
# seriall.close()
def initialize(self):
log_frame = Tkinter.Frame(self)
interface_frame = Tkinter.Frame(self)
printers_frame = Tkinter.Frame(self)
log_frame.pack(side="right", fill="both", expand=True)
interface_frame.pack(side="left", fill="x")
printers_frame.pack(side="right", fill="x")
comport_frame = Tkinter.Frame(interface_frame)
center_frame = Tkinter.Frame(interface_frame)
comport_frame.pack(side="top", )
center_frame.pack(side="bottom", fill="y")
printList_frame = Tkinter.Frame(printers_frame)
printBtns_frame = Tkinter.Frame(printers_frame)
printList_frame.pack(side="top")
printBtns_frame.pack(side="bottom")
#Logger
import ScrolledText
terminal = ScrolledText.ScrolledText(log_frame,
state='disabled',
height=1)
terminal.pack(side="left", fill="both", expand=True)
# Create textLogger
self.logger = TextRedirector(terminal)
#Comport Interface
list_frame = Tkinter.Frame(comport_frame)
btns_frame = Tkinter.Frame(comport_frame)
list_frame.pack(side="top", fill="both", expand=True)
btns_frame.pack(side="bottom")
#Listbox that lists serial comport available
self.comport_list = Tkinter.Listbox(list_frame, height=3)
self.comport_list.pack(side="left", expand=True)
comports = serial_ports()
for comport in range(len(comports)):
self.comport_list.insert(Tkinter.END, comports[comport])
comport_scrollBar = Tkinter.Scrollbar(list_frame,
orient=Tkinter.VERTICAL)
comport_scrollBar.pack(side="right", fill="y", expand=True)
comport_scrollBar.configure(command=self.comport_list.yview)
self.comport_list.configure(yscrollcommand=comport_scrollBar.set)
self.Refresh_Btn = Tkinter.Button(btns_frame,
text=u"Refresh",
command=self.Refresh_Btn,
width=15)
self.Refresh_Btn.pack()
self.Connect_Btn = Tkinter.Button(btns_frame,
text=u"Connect",
command=self.Connect,
width=15)
self.Connect_Btn.pack()
self.Disconnect_Btn = Tkinter.Button(btns_frame,
text=u"Disconnect",
command=self.Disconect,
width=15,
state='disable')
self.Disconnect_Btn.pack()
self.Clear_Btn = Tkinter.Button(btns_frame,
text=u"Clear log",
command=self.Clear,
width=15)
self.Clear_Btn.pack()
#Creation of IMEI entry,
self.CartonNo_label = Tkinter.Label(center_frame, text="Carton No.")
self.CartonNo_label.pack()
self.entry = Tkinter.Entry(center_frame)
self.entry.pack()
self.SetCarton_Btn = Tkinter.Button(center_frame,
text=u"Set Carton No",
command=self.SetCartonNo,
width=15)
self.SetCarton_Btn.pack()
if os.path.isfile('nIMEI.bin'):
with open('nIMEI.bin', 'r') as file:
imei = file.read()
else:
with open('nIMEI.bin', 'w') as file:
imei = "35337208000000"
file.write(imei)
self.IMEI_label = Tkinter.Label(center_frame, text="IMEI")
self.IMEI_label.pack()
self.IMEI = Tkinter.StringVar()
self.IMEI.set(imei)
self.IMEIentry = Tkinter.Entry(center_frame, textvariable=self.IMEI)
self.IMEIentry.pack()
self.FetchBtn = Tkinter.Button(center_frame,
text=u"Write IMEI",
command=self.WriteIMEI,
width=15)
self.FetchBtn.pack()
self.ReadBtn = Tkinter.Button(center_frame,
text=u"Read IMEI",
command=self.ReadIMEI,
width=15)
self.ReadBtn.pack()
#Listbox that lists printers available
self.printers_list = Tkinter.Listbox(printList_frame, width=30)
self.printers_list.pack(side="left", expand=True)
z = zebra()
printers = z.getqueues()
del z
for port in range(len(printers)):
self.printers_list.insert(Tkinter.END, printers[port])
printers_scrollBar = Tkinter.Scrollbar(printList_frame,
orient=Tkinter.VERTICAL)
printers_scrollBar.pack(side="right", fill="y", expand=True)
printers_scrollBar.configure(command=self.printers_list.yview)
self.printers_list.configure(yscrollcommand=printers_scrollBar.set)
self.printerRefresh_btn = Tkinter.Button(
printBtns_frame,
text=u"Refresh",
command=self.printerRefresh_cb,
width=15)
self.printerRefresh_btn.pack()
self.printerConnect_btn = Tkinter.Button(
printBtns_frame,
text=u"Connect printer",
command=self.printerConnect_cb,
width=15)
self.printerConnect_btn.pack()
self.printerDisconnect_btn = Tkinter.Button(
printBtns_frame,
text=u"Disconnect printer",
command=self.printerDisconnect_cb,
state="disable",
width=15)
self.printerDisconnect_btn.pack()
self.printerTest_btn = Tkinter.Button(printBtns_frame,
text=u"Test printer",
command=self.TestPrinter,
width=15)
self.printerTest_btn.pack()
self.PrintBtn = Tkinter.Button(
printBtns_frame,
text=u"Print",
command=lambda: self.PrintLabel(self.IMEI.get()),
width=15)
self.PrintBtn.pack()
self.logger.info("IMEI to be written: " + imei)
def _SendToPrinter(self, epl_code):
from zebra import zebra
zebra = zebra(self._printer_name)
zebra.output(epl_code)
from zebra import zebra
from parser_utils import ChassisParser, CPUParser, DriveParser, MacAddressParse, MemoryParser, NetworkParser, ServerParse
from utils import CSVReport, FileWatcher, PrinterTemplate, ThermalPrinter, TEMPLATE
from config import FILE_PATH, LABEL_DIMENSIONS, PRINTER_NAME, REPORT_NAME
specs = ServerParse(FILE_PATH)
mac = MacAddressParse(FILE_PATH, 'SFP')
net = NetworkParser(FILE_PATH)
drive = DriveParser(FILE_PATH)
cpu = CPUParser(FILE_PATH)
mem = MemoryParser(FILE_PATH)
watcher = FileWatcher(FILE_PATH)
report = CSVReport(FILE_PATH, REPORT_NAME, specs)
chassis = ChassisParser(FILE_PATH)
servers = os.listdir(chassis.path)
z = zebra(queue=PRINTER_NAME)
zeb = ThermalPrinter(mac, z)
if __name__ == "__main__":
print(" ________________________")
print(r"// \\")
print(r"|| Script running... ||")
print(r"\\________________________//", '\n')
print('Press: ctrl+c to exit program', '\n')
report.get_po_input()
report.open_report()
watcher.watch(report, zeb)
