def qqiswap(sample, measure=0, delay=20 * ns, zpa=None, name='iswap', des=''):
"""
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
prep_Nqbit(qubits)
q = qubits[measure]
q_ref = qubits[0]
if zpa is None:
zpa = q['zpa']
# set some parameters name;
axes = [(delay, 'delay'), (zpa, 'zpa')]
deps = deps_Nqbitpopu(nq=2, qLevel=2)
# create dataset
dataset = sweeps.prepDataset(sample, name, axes, deps, kw={})
def runSweeper(devices, para_list):
delay, zpa = para_list
start = 0.
q.xy = XYnothing(q)
addXYgate(q, start, np.pi, 0.)
start += q['piLen']['s'] + 50e-9
q.z = waveforms.square(amp=zpa,
start=start,
length=q.piLen[s] + 100e-9)
start += 100e-9
start += q['qa_start_delay'][s]
for _q in qubits:
_q.r = readoutPulse(_q)
_q['experiment_length'] = start
_q['do_readout'] = True
set_qubitsDC(qubits, q_ref['experiment_length'])
data = runQ(qubits, devices)
prob = tunneling(qubits, data, level=2)
clear_waveforms(qubits)
return prob
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
return
def Nqubit_state(sample,
reps=10,
measure=[0, 1],
states=[0, 0],
name='Nqubit_state',
des=''):
sample, qubits, Qubits = loadQubits(sample, write_access=True)
reps = np.arange(reps)
prep_Nqbit(qubits)
axes = [(reps, 'reps')]
labels = gene_binary(len(measure), 2)
states_str = functools.reduce(lambda x, y: str(x) + str(y), states)
def get_dep(x):
return ('', 'measure ' + str(x), '')
deps = list(map(get_dep, labels))
q_ref = qubits[0]
kw = {}
kw['states'] = states
dataset = sweeps.prepDataset(sample, name + des, axes, deps, kw=kw)
def runSweeper(devices, para_list):
start = 0.
for i, _qb in enumerate(qubits):
_qb.xy = XYnothing(_qb)
addXYgate(_qb, start, np.pi * states[i], 0.)
start += max(map(lambda q: q['piLen']['s'], qubits)) + 50e-9
for _q in qubits:
_q.r = readoutPulse(_q)
_q['experiment_length'] = start
_q['do_readout'] = True
set_qubitsDC(qubits, q_ref['experiment_length'])
data = runQ(qubits, devices)
prob = tunneling(qubits, data, level=2)
clear_waveforms(qubits)
return prob
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
return
def testing_runQ(sample,
measure=0,
stats=1024,
freq=6.0 * GHz,
delay=0 * ns,
power=-30.0 * dBm,
sb_freq=None,
name='virtual testing',
des='',
back=False):
""" testing runQubits looping
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
## set some parameters name;
axes = [(freq, 'freq'), (power, 'power'), (delay, 'delay')]
deps = [('Amp', '', 'a.u.'), ('Phase', '', 'rad'), ('I', '', ''),
('Q', '', '')]
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample, name + des, axes, deps, kw=kw)
# dataset_create(dataset)
def runSweeper(devices, para_list):
freq, power, delay = para_list
q.power_r = 10**(power / 20 - 0.5)
data = runDummy([q], devices)
time.sleep(0.01)
for _d_ in data:
amp = np.mean(
np.abs(_d_)) / q.power_r ## unit: dB; only relative strength;
phase = np.mean(np.angle(_d_))
Iv = np.mean(np.real(_d_))
Qv = np.mean(np.imag(_d_))
result = [amp, phase, Iv, Qv]
return result
axes_scans = checkAbort(gridSweep(axes), prefix=[1], func=stop_device)
result_list = RunAllDummy(runSweeper, axes_scans, dataset)
if back:
return result_list
def ramsey(sample,
measure=0,
stats=1024,
delay=ar[0:10:0.4, us],
repetition=1,
df=0 * MHz,
fringeFreq=10 * MHz,
PHASE=0,
name='ramsey',
des='',
back=False):
""" sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
q.sb_freq = (q['f10'] - q['xy_mw_fc'])[Hz]
for qb in qubits:
qb['awgs_pulse_len'] += np.max(delay)
# set some parameters name;
axes = [(repetition, 'repetition'), (delay, 'delay'), (df, 'df'),
(fringeFreq, 'fringeFreq'), (PHASE, 'PHASE')]
deps = [('Amplitude', 's21 for', 'a.u.'), ('Phase', 's21 for', 'rad'),
('I', '', ''), ('Q', '', ''), ('prob |1>', '', '')]
kw = {'stats': stats, 'fringeFreq': fringeFreq}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
q_copy = q.copy()
def runSweeper(devices, para_list):
repetition, delay, df, fringeFreq, PHASE = para_list
# set device parameter
q['xy_mw_fc'] = q_copy['xy_mw_fc'] + df * Hz
# ----- begin waveform ----- ###
start = 0
q.z = waveforms.square(amp=q.zpa[V],
start=start,
length=delay + 2 * q.piLen[s] + 100e-9)
start += 50e-9
q.xy = XYnothing(q)
addXYgate(q, start, theta=np.pi / 2., phi=0.)
start += delay + q.piLen['s']
addXYgate(q,
start,
theta=np.pi / 2.,
phi=PHASE + fringeFreq * delay * 2. * np.pi)
start += q.piLen[s] + 50e-9
start += 100e-9 + q['qa_start_delay'][s]
q['experiment_length'] = start
set_qubitsDC(qubits, q['experiment_length'])
q['do_readout'] = True
q.r = readoutPulse(q)
# start to run experiment
data = runQ(qubits, devices)
# analyze data and return
_d_ = data[0]
# unit: dB; only relative strength;
amp = np.abs(np.mean(_d_)) / q.power_r
phase = np.angle(np.mean(_d_))
Iv = np.mean(np.real(_d_))
Qv = np.mean(np.imag(_d_))
prob = tunneling([q], [_d_], level=2)
# multiply channel should unfold to a list for return result
result = [amp, phase, Iv, Qv, prob[1]]
clear_waveforms(qubits)
return result
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
def T1_visibility(sample,
measure=0,
stats=1024,
delay=0.8 * us,
zpa=None,
bias=None,
name='T1_visibility',
des='',
back=False):
""" sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
for qb in qubits:
qb.channels = dict(qb['channels'])
if bias is None:
bias = q['bias']
if zpa is None:
zpa = q['zpa']
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
q.sb_freq = (q['f10'] - q['xy_mw_fc'])[Hz]
for qb in qubits:
qb['awgs_pulse_len'] += np.max(delay) # add max length of hd waveforms
# set some parameters name;
axes = [(bias, 'bias'), (zpa, 'zpa'), (delay, 'delay')]
deps = [('Amplitude', '1', 'a.u.'), ('Phase', '1', 'rad'),
('prob with pi pulse', '|1>', ''), ('Amplitude', '0', 'a.u.'),
('Phase', '0', 'rad'), ('prob without pi pulse', '|1>', '')]
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
bias, zpa, delay = para_list
# ## set device parameter
# ----- with pi pulse ----- ###
start = 0
q['bias'] = bias
q.z = waveforms.square(amp=zpa,
start=start,
length=delay + q.piLen[s] + 100e-9)
start += 10e-9
q.xy = XYnothing(q)
addXYgate(q, start, np.pi, 0.)
start += q.piLen['s'] + delay
start += q['qa_start_delay']['s']
q['experiment_length'] = start
set_qubitsDC(qubits, q['experiment_length'])
q['do_readout'] = True
q.r = readoutPulse(q)
# start to run experiment
data1 = runQ(qubits, devices)
# analyze data and return
_d_ = data1[0]
# unit: dB; only relative strength;
amp1 = np.mean(np.abs(_d_)) / q.power_r
phase1 = np.mean(np.angle(_d_))
prob1 = tunneling([q], [_d_], level=2)
# ----- without pi pulse ----- ###
q.xy = XYnothing(q)
# start to run experiment
data0 = runQ(qubits, devices)
_d_ = data0[0]
# analyze data and return
amp0 = np.abs(np.mean(_d_)) / q.power_r
phase0 = np.angle(np.mean(_d_))
prob0 = tunneling([q], [_d_], level=2)
# multiply channel should unfold to a list for return result
result = [amp1, phase1, prob1[1], amp0, phase0, prob0[1]]
clear_waveforms(qubits)
return result
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
def measureFidelity(sample,
rep=10,
measure=0,
stats=1024,
update=True,
analyze=False,
name='measureFidelity',
des='',
back=True):
reps = np.arange(rep)
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
Qb = Qubits[measure]
q.channels = dict(q['channels'])
for qb in qubits:
qb.demod_freq = qb['readout_freq'][Hz] - qb['readout_mw_fc'][Hz]
q.sb_freq = (q['f10'] - q['xy_mw_fc'])[Hz]
# set some parameters name;
axes = [(reps, 'reps')]
def deps_text(idxs):
return ('measure |%d>, prepare (|%d>)' % (idxs[0], idxs[1]), '', '')
deps = list(map(deps_text, itertools.product([0, 1], [0, 1])))
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
# with pi pulse --> |1> ##
reps = para_list
start = 0
q.z = waveforms.square(amp=q.zpa[V],
start=start,
length=q.piLen[s] + 100e-9)
start += 50e-9
q.xy = XYnothing(q)
addXYgate(q, start, np.pi, 0.)
start += q['piLen']['s'] + 50e-9
start += 100e-9
start += q['qa_start_delay'][s]
for _q in qubits:
_q.r = readoutPulse(_q)
_q['experiment_length'] = start
_q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
result = []
# start to run experiment
data1 = runQ(qubits, devices)[measure]
# no pi pulse --> |0> ##
q.xy = XYnothing(q)
addXYgate(q, start, 0., 0.)
# start to run experiment
data0 = runQ(qubits, devices)[measure]
prob0 = tunneling([q], [data0], level=2)
prob1 = tunneling([q], [data1], level=2)
clear_waveforms(qubits)
return [prob0[0], prob1[0], prob0[1], prob1[1]]
axes_scans = gridSweep(axes)
results = RunAllExp(runSweeper, axes_scans, dataset)
if update:
Qb['MatRead'] = np.mean(results, 0)[1:].reshape(2, 2)
if back:
return results
def IQraw210(sample,
measure=0,
stats=1024,
update=False,
analyze=False,
reps=1,
name='IQ raw210',
des='',
back=True):
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
Qb = Qubits[measure]
for qb in qubits:
qb.power_r = power2amp(qb['readout_amp']['dBm'])
qb.demod_freq = qb['readout_freq'][Hz] - qb['readout_mw_fc'][Hz]
q['stats'] = stats
# set some parameters name;
axes = [(reps, 'reps')]
deps = []
for i in range(3):
deps += [('Is', str(i), ''), ('Qs', str(i), '')]
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def get_IQ(data):
Is = np.real(data[0])
Qs = np.imag(data[0])
return [Is, Qs]
def runSweeper(devices, para_list):
reps = para_list[0]
# |1>
start = 0
q.z = waveforms.square(amp=q.zpa[V],
start=start,
length=q.piLen[s] + q.piLen21[s])
q['xy'] = XYnothing(q)
addXYgate(q, start, theta=np.pi, phi=0.)
start += q.piLen[s] + q.piLen21[s]
start += q['qa_start_delay'][s]
for _qb in qubits:
_qb['experiment_length'] = start
q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
q.r = readoutPulse(q)
# start to run experiment
data1 = runQ(qubits, devices)
# state 2
start = 0
q.z = waveforms.square(amp=q.zpa['V'],
start=start,
length=q.piLen['s'] + q.piLen21['s'])
q['xy'] = XYnothing(q)
addXYgate(q, start, theta=np.pi, phi=0.)
start += q.piLen['s']
addXYgate(q,
start,
theta=np.pi,
phi=0.,
piAmp='piAmp21',
fq='f21',
piLen='piLen21')
start += q.piLen21['s']
start += q['qa_start_delay'][s]
data2 = runQ(qubits, devices)
# state 0
q.xy = [waveforms.square(amp=0), waveforms.square(amp=0)]
data0 = runQ(qubits, devices)
result = []
for data in [data0, data1, data2]:
result += get_IQ(data)
clear_waveforms(qubits)
return result
collect, raw = True, True
axes_scans = gridSweep(axes)
results = RunAllExp(runSweeper, axes_scans, dataset, collect, raw)
data = np.asarray(results[0])
if update:
adjuster.IQ_center_multilevel(qubit=Qb, data=data)
return data
def IQraw(sample,
measure=0,
stats=16384,
update=False,
analyze=False,
reps=1,
name='IQ raw',
des='',
back=True):
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
Qb = Qubits[measure]
q.channels = dict(q['channels'])
q['stats'] = stats
for qb in qubits:
qb.power_r = power2amp(qb['readout_amp']['dBm'])
qb.demod_freq = qb['readout_freq'][Hz] - qb['readout_mw_fc'][Hz]
# set some parameters name;
axes = [(reps, 'reps')]
deps = [('Is', '|0>', ''), ('Qs', '|0>', ''), ('Is', '|1>', ''),
('Qs', '|1>', '')]
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
reps = para_list[0]
# with pi pulse --> |1> ##
start = 0
q.z = waveforms.square(amp=q.zpa[V],
start=start,
length=q.piLen[s] + 100e-9)
start += 50e-9
q['xy'] = XYnothing(q)
addXYgate(q, start, theta=np.pi, phi=0.)
start += q.piLen[s] + 50e-9
start += 100e-9
start += q['qa_start_delay'][s]
for _q in qubits:
_q.r = readoutPulse(_q)
_q['experiment_length'] = start
_q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
# start to run experiment
data1 = runQ(qubits, devices)[measure]
q['xy'] = XYnothing(q)
data0 = runQ(qubits, devices)[measure]
Is0 = np.real(data0)
Qs0 = np.imag(data0)
Is1 = np.real(data1)
Qs1 = np.imag(data1)
result = [Is0, Qs0, Is1, Qs1]
clear_waveforms(qubits)
return result
collect, raw = True, True
axes_scans = gridSweep(axes)
results = RunAllExp(runSweeper, axes_scans, dataset, collect, raw)
data = np.asarray(results[0])
# print(data)
if update:
dataProcess._updateIQraw2(data=data,
Qb=Qb,
dv=None,
update=update,
analyze=analyze)
return data
def rabihigh21(sample,
measure=0,
stats=1024,
piamp21=None,
piLen21=None,
df=0 * MHz,
zpa=None,
name='rabihigh21',
des='',
back=False):
"""
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
q.channels = dict(q['channels'])
q_copy = q.copy()
if zpa is None:
zpa = q['zpa']
if piamp21 is None:
piamp21 = q['piAmp21']
if piLen21 is None:
piLen21 = q['piLen21']
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
# set some parameters name;
axes = [(zpa, 'zpa'), (df, 'df'), (piamp21, 'piamp21'),
(piLen21, 'piLen21')]
deps = dependents_1q()[:-1]
deps_pro = [('pro', str(i), '') for i in range(3)]
deps.extend(deps_pro)
kw = {'stats': stats}
for qb in qubits:
qb['awgs_pulse_len'] += q['piLen'] + q['piLen21']
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
zpa, df, piamp21, piLen21 = para_list
q['piAmp21'] = piamp21
q['piLen21'] = Value(piLen21, 's')
q['f21'] = q_copy['f21'] + Value(df, 'Hz')
start = 0.
q.z = waveforms.square(amp=zpa,
start=start,
length=q.piLen['s'] + q.piLen21['s'])
q['xy'] = XYnothing(q)
addXYgate(q, start, theta=np.pi, phi=0.)
start += q['piLen']['s']
start += 50e-9
addXYgate(q,
start,
theta=np.pi,
phi=0.,
piAmp='piAmp21',
fq='f21',
piLen='piLen21')
start += q['piLen21']['s']
start += 100e-9
start += q['qa_start_delay']['s']
q['experiment_length'] = start
q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
q.r = readoutPulse(q)
data = runQ([q], devices)
_d_ = data[0]
amp = np.abs(np.mean(_d_)) / q.power_r
phase = np.angle(np.mean(_d_))
Iv = np.mean(np.real(_d_))
Qv = np.mean(np.imag(_d_))
prob = tunneling([q], [_d_], level=3)
# multiply channel should unfold to a list for return result
result = [amp, phase, Iv, Qv, prob[0], prob[1], prob[2]]
clear_waveforms(qubits)
return result
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
return
def rabihigh(sample,
measure=0,
stats=1024,
piamp=None,
piLen=None,
df=0 * MHz,
bias=None,
zpa=None,
name='rabihigh',
des='',
back=False):
"""
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
if bias is None:
bias = q['bias']
if zpa is None:
zpa = q['zpa']
if piamp is None:
piamp = q['piAmp']
if piLen is None:
piLen = q['piLen']
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
q.sb_freq = (q['f10'] - q['xy_mw_fc'])[Hz]
# set some parameters name;
axes = [(bias, 'bias'), (zpa, 'zpa'), (df, 'df'), (piamp, 'piamp'),
(piLen, 'piLen')]
deps = dependents_1q()
kw = {'stats': stats}
for qb in qubits:
qb['awgs_pulse_len'] += np.max(piLen) # add max length of hd waveforms
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
q_copy = q.copy()
def runSweeper(devices, para_list):
bias, zpa, df, piamp, piLen = para_list
# since we only have one uwave source
for _qb in qubits:
_qb['xy_mw_fc'] = q_copy['xy_mw_fc'] + df * Hz
start = 0
q.z = waveforms.square(amp=zpa, start=start, length=piLen + 100e-9)
start += 50e-9
q.xy = [
waveforms.cosine(amp=piamp,
freq=q.sb_freq,
start=start,
length=piLen),
waveforms.sine(amp=piamp,
freq=q.sb_freq,
start=start,
length=piLen)
]
start += piLen + 50e-9
q['bias'] = bias * V
# additional readout gap, avoid hdawgs fall affect
start += 100e-9
# align qa & hd start
start += q['qa_start_delay']['s']
q['experiment_length'] = start
q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
q.r = readoutPulse(q)
data = runQ(qubits, devices)[0]
clear_waveforms(qubits)
return processData_1q(data, q)
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
def spectroscopy(sample,
measure=0,
stats=1024,
freq=None,
specLen=1 * us,
specAmp=0.05,
sb_freq=None,
bias=None,
zpa=None,
name='spectroscopy',
des='',
back=False):
"""
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
q.stats = stats
if freq is None:
freq = q['f10']
if bias is None:
bias = q['bias']
if zpa is None:
zpa = q['zpa']
if sb_freq is None:
sb_freq = (q['f10'] - q['xy_mw_fc'])
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = (q['readout_freq'] - q['readout_mw_fc'])[Hz]
# set some parameters name;
axes = [(freq, 'freq'), (specAmp, 'specAmp'), (specLen, 'specLen'),
(bias, 'bias'), (zpa, 'zpa')]
deps = dependents_1q()
kw = {'stats': stats, 'sb_freq': sb_freq}
for qb in qubits:
# add max length of hd waveforms
qb['awgs_pulse_len'] += np.max(specLen)
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
freq, specAmp, specLen, bias, zpa = para_list
q['xy_mw_fc'] = freq * Hz - sb_freq
start = 0
q.z = waveforms.square(amp=zpa, start=start, length=specLen + 100e-9)
start += 50e-9
q.xy = [
waveforms.cosine(amp=specAmp,
freq=sb_freq['Hz'],
start=start,
length=specLen),
waveforms.sine(amp=specAmp,
freq=sb_freq['Hz'],
start=start,
length=specLen)
]
start += specLen + 50e-9
q['bias'] = bias
start += 100e-9
start += q['qa_start_delay']['s']
q['experiment_length'] = start
q['do_readout'] = True
set_qubitsDC(qubits, q['experiment_length'])
q.r = readoutPulse(q)
data = runQ(qubits, devices)[measure]
clear_waveforms(qubits)
return processData_1q(data, q)
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
if back:
return result_list
def s21_scan(sample,
measure=0,
stats=1024,
freq=6.0 * GHz,
delay=0 * ns,
phase=0,
mw_power=None,
bias=None,
power=None,
zpa=0.0,
name='s21_scan',
des=''):
"""
s21 scanning
Args:
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
q.channels = dict(q['channels'])
q.stats = stats
if freq is None:
freq = q['readout_freq']
if bias is None:
bias = q['bias']
if power is None:
power = q['readout_amp']
q.power_r = power2amp(q['readout_amp']['dBm'])
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
if mw_power is None:
mw_power = q['readout_mw_power']
q.awgs_pulse_len += np.max(delay) # add max length of hd waveforms
# set some parameters name;
axes = [(freq, 'freq'), (bias, 'bias'), (zpa, 'zpa'), (power, 'power'),
(mw_power, 'mw_power'), (delay, 'delay'), (phase, 'phase')]
deps = [('Amplitude', 's21 for', 'a.u.'), ('Phase', 's21 for', 'rad'),
('I', '', ''), ('Q', '', '')]
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
measure=measure,
kw=kw)
def runSweeper(devices, para_list):
freq, bias, zpa, power, mw_power, delay, phase = para_list
q['bias'] = Value(bias, 'V')
q['readout_amp'] = power * dBm
q.power_r = power2amp(power)
q['readout_mw_fc'] = (freq - q['demod_freq']) * Hz
start = 0
q.z = waveforms.square(amp=zpa)
q.xy = [waveforms.square(amp=0), waveforms.square(amp=0)]
start += delay
start += 100e-9
start += q['qa_start_delay']['s']
for _qb in qubits:
_qb['experiment_length'] = start
q['do_readout'] = True
q.r = readoutPulse(q)
set_qubitsDC(qubits, q['experiment_length'])
data = runQ([q], devices)
_d_ = data[0]
amp = np.abs(np.mean(_d_)) / q.power_r
phase = np.angle(np.mean(_d_))
Iv = np.real(np.mean(_d_))
Qv = np.imag(np.mean(_d_))
return [amp, phase, Iv, Qv]
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
def Qstate_tomo(sample,
rep=10,
state=[0, 1],
name='tomoTest',
tbuffer=10e-9,
des=''):
sample, qubits, Qubits = loadQubits(sample, write_access=True)
num_q = len(qubits)
prep_Nqbit(qubits)
reps = range(rep)
axes = [(reps, 'reps')]
deps = tomo_deps(num_q)
piLens = list(map(lambda q: q['piLen'], qubits))
kw = {'state': state}
dataset = sweeps.prepDataset(sample, name, axes, deps, kw=kw)
fid_matNq = read_correct_mat(qubits)
def add_tomo_gate(qubits, idx_qst, start):
angles = [0, np.pi / 2, np.pi / 2]
phases = [0, 0, np.pi / 2]
_base3 = number_to_base(idx_qst, 3)
idx_qst_base3 = [0] * (len(qubits) - len(_base3)) + _base3
for i, _qt in enumerate(qubits):
idx_pulse = idx_qst_base3[i]
theta = angles[idx_pulse]
phi = phases[idx_pulse]
addXYgate(_qt, start, theta, phi)
return
def prepare_state(qubits, start):
for i, q in enumerate(qubits):
q['xy'] = XYnothing(q)
if state[i] == 1:
addXYgate(q, start, np.pi, 0.)
else:
addXYgate(q, start, 0., 0.)
return
def read_pulse(qubits, start):
for _q in qubits:
_q.r = readoutPulse(_q)
_q['experiment_length'] = start
_q['do_readout'] = True
set_qubitsDC(qubits, qubits[0]['experiment_length'])
return
def get_prob(data):
prob_raw = tunneling(qubits, data, level=2)
prob = np.asarray(np.dot(fid_matNq, prob_raw))[0]
return prob
def runSweeper(devices, para_list):
reps = para_list
reqs = []
q_ref = qubits[0]
for idx_qst in np.arange(3**len(qubits)):
start = 0.
prepare_state(qubits, start)
start += np.max(piLens)['s'] + tbuffer
add_tomo_gate(qubits, idx_qst, start)
start += np.max(piLens)['s'] + tbuffer
start += q_ref['qa_start_delay']['s']
read_pulse(qubits, start)
data = runQ(qubits, devices)
prob = get_prob(data)
reqs.append(prob)
clear_waveforms(qubits)
return np.hstack(reqs)
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
return
def s21_dispersiveShift(sample,
measure=0,
stats=1024,
freq=ar[6.4:6.5:0.02, GHz],
delay=0 * ns,
mw_power=None,
bias=None,
power=None,
sb_freq=None,
name='s21_disperShift',
des='',
back=False):
"""
sample: select experimental parameter from registry;
stats: Number of Samples for one sweep point;
"""
sample, qubits, Qubits = loadQubits(sample, write_access=True)
q = qubits[measure]
q.channels = dict(q['channels'])
if bias is None:
bias = q['bias']
if power is None:
power = q['readout_amp']
if sb_freq is None:
sb_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
if mw_power is None:
mw_power = q['readout_mw_power']
q.awgs_pulse_len += np.max(delay) # add max length of hd waveforms
q.demod_freq = q['readout_freq'][Hz] - q['readout_mw_fc'][Hz]
# set some parameters name;
axes = [(freq, 'freq'), (bias, 'bias'), (power, 'power'),
(sb_freq, 'sb_freq'), (mw_power, 'mw_power'), (delay, 'delay')]
deps = [('Amplitude|0>', 'S11 for %s' % q.__name__, ''),
('Phase|0>', 'S11 for %s' % q.__name__, rad)]
deps.append(('I|0>', '', ''))
deps.append(('Q|0>', '', ''))
deps.append(('Amplitude|1>', 'S11 for %s' % q.__name__, rad))
deps.append(('Phase|1>', 'S11 for %s' % q.__name__, rad))
deps.append(('I|1>', '', ''))
deps.append(('Q|1>', '', ''))
deps.append(('SNR', '', ''))
kw = {'stats': stats}
# create dataset
dataset = sweeps.prepDataset(sample,
name + des,
axes,
deps,
kw=kw,
measure=measure)
def runSweeper(devices, para_list):
freq, bias, power, sb_freq, mw_power, delay = para_list
q['readout_amp'] = power * dBm
q.power_r = power2amp(power)
# set microwave source device
q['readout_mw_fc'] = (freq - q['demod_freq']) * Hz
# write waveforms
# with pi pulse --> |1> ##
q.xy_sb_freq = (q['f10'] - q['xy_mw_fc'])[Hz]
start = 0
q.z = waveforms.square(amp=q.zpa[V],
start=start,
length=q.piLen[s] + 100e-9)
start += 50e-9
q.xy = [
waveforms.cosine(amp=q.piAmp,
freq=q.xy_sb_freq,
start=start,
length=q.piLen[s]),
waveforms.sine(amp=q.piAmp,
freq=q.xy_sb_freq,
start=start,
length=q.piLen[s])
]
start += q.piLen[s] + 50e-9
q['bias'] = bias
start += delay
start += 100e-9
start += q['qa_start_delay'][s]
q['experiment_length'] = start
set_qubitsDC(qubits, q['experiment_length'])
q['do_readout'] = True
q.r = readoutPulse(q)
# start to run experiment
data1 = runQ([q], devices)
# no pi pulse --> |0> ##
q.xy = [waveforms.square(amp=0), waveforms.square(amp=0)]
# start to run experiment
data0 = runQ([q], devices)
# analyze data and return
_d_ = data0[0]
# unit: dB; only relative strength;
amp0 = np.abs(np.mean(_d_)) / q.power_r
phase0 = np.angle(np.mean(_d_))
Iv0 = np.mean(np.real(_d_))
Qv0 = np.mean(np.imag(_d_))
_d_ = data1[0]
# unit: dB; only relative strength;
amp1 = np.abs(np.mean(_d_)) / q.power_r
phase1 = np.angle(np.mean(_d_))
Iv1 = np.mean(np.real(_d_))
Qv1 = np.mean(np.imag(_d_))
# multiply channel should unfold to a list for return result
result = [amp0, phase0, Iv0, Qv0]
result += [amp1, phase1, Iv1, Qv1]
result += [np.abs((Iv1 - Iv0) + 1j * (Qv1 - Qv0))]
clear_waveforms(qubits)
return result
axes_scans = gridSweep(axes)
result_list = RunAllExp(runSweeper, axes_scans, dataset)
if back:
return result_list