def on_push_button_clicked(self):
if self.pushButton.isChecked():
try:
host = str(ip_address(self.lineEdit_host.text()))
port = self.lineEdit_port.text()
if not port.isdigit():
raise ValueError
except(ValueError):
self.pushButton.setChecked(False)
self.show_message('Please enter valid numeric IP address and port number.')
return
self.zeromq_listener_10001 = ZMQListener(host, port, '10001')
self.zeromq_listener_10001.moveToThread(self.thread)
self.zeromq_listener_10001.message.connect(self.signal_received_10001)
self.zeromq_listener_10001.err_msg.connect(self.show_message)
self.thread.started.connect(self.zeromq_listener_10001.loop)
self.thread.start()
self.pushButton.setText('Stop')
self.show_message('Connected to server: {}:{}'.format(host, port))
else:
self.zeromq_listener_10001.running = False
self.thread.terminate()
self.pushButton.setText('Start')
self.show_message('Disconnected.')
def __init__(self):
"""
The constructor and initiator.
:return:
"""
# initial setup
super(mainWindow, self).__init__()
self.setupUi(self)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the host address:', QLineEdit.Normal, '140.181.97.133')
# if ok:
# host = str(text)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the port number:', QLineEdit.Normal, '10000')
# if ok:
# port = int(text)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the topic number for Dump-Pressure:', QLineEdit.Normal, '10001')
# if ok:
# topic = str(text)
host = '140.181.97.133'
port = 10000
topic = '10001'
self.thread = QThread()
self.zeromq_listener = ZMQListener(host, port)
self.zeromq_listener.moveToThread(self.thread)
self.thread.started.connect(self.zeromq_listener.loop)
self.gas = Wasserstoff()
# self.gasart_label.setText(self.gas.label)
# Connect signals
self.connect_signals()
QTimer.singleShot(0, self.thread.start)
self.show_message('Connected to server: {}:{}'.format(host, port))
class mainWindow(QMainWindow, Ui_MainWindow):
"""
The main class for the GUI window
"""
def __init__(self):
"""
The constructor and initiator.
:return:
"""
# initial setup
super(mainWindow, self).__init__()
self.setupUi(self)
self.thread = QThread()
self.connected = False
# Connect signals
self.connect_signals()
def on_push_button_clicked(self):
if self.pushButton.isChecked():
try:
host = str(ip_address(self.lineEdit_host.text()))
port = self.lineEdit_port.text()
if not port.isdigit():
raise ValueError
except(ValueError):
self.pushButton.setChecked(False)
self.show_message('Please enter valid numeric IP address and port number.')
return
self.zeromq_listener_10001 = ZMQListener(host, port, '10001')
self.zeromq_listener_10001.moveToThread(self.thread)
self.zeromq_listener_10001.message.connect(self.signal_received_10001)
self.zeromq_listener_10001.err_msg.connect(self.show_message)
self.thread.started.connect(self.zeromq_listener_10001.loop)
self.thread.start()
self.pushButton.setText('Stop')
self.show_message('Connected to server: {}:{}'.format(host, port))
else:
self.zeromq_listener_10001.running = False
self.thread.terminate()
self.pushButton.setText('Start')
self.show_message('Disconnected.')
def connect_signals(self):
"""
Connects signals.
:return:
"""
# Action about and Action quit will be shown differently in OSX
self.actionAbout.triggered.connect(self.show_about_dialog)
self.actionQuit.triggered.connect(self.shutdown)
self.pushButton.clicked.connect(self.on_push_button_clicked)
def shutdown(self):
self.zeromq_listener_10001.running = False
self.thread.terminate()
self.thread.quit()
self.thread.wait()
QCoreApplication.instance().quit()
def signal_received_10001(self, message):
# get the message and split it
topic, time, stat_bits, value_str = message.split()
current_range = int(stat_bits[-3:], 2)
range_str = RANGE_DIC[current_range]
self.label_time_stamp.setText(time)
self.label_status.setText(stat_bits)
self.label_range.setText(range_str)
# do the calibration
value_float = float(value_str) * CAL_SLOPE + CAL_ITCPT
# convert binary to float value
value = value_float * RAIL_VOLTAGE / ADC_QUANTIZATION
# set to 2 decimal points
value = int(value * 100) / 100
# in case more digits are needed
# self.lcdNumber.setDigitCount(8)
if self.zeromq_listener_10001.running:
self.lcdNumber.display(value)
else:
self.lcdNumber.display(0)
def closeEvent(self, event):
self.zeromq_listener_10001.running = False
self.thread.terminate()
self.thread.quit()
self.thread.wait()
def show_message(self, message):
"""
Implementation of an abstract method:
Show text in status bar
:param message:
:return:
"""
self.statusbar.showMessage(message)
def show_about_dialog(self):
"""
Show about dialog
:return:
"""
about_dialog = QDialog()
about_dialog.ui = Ui_AbooutDialog()
about_dialog.ui.setupUi(about_dialog)
about_dialog.ui.labelVersion.setText('Version: {}'.format(__version__))
about_dialog.exec_()
about_dialog.show()
class mainWindow(QMainWindow, Ui_MainWindow):
"""
The main class for the GUI window
"""
def __init__(self):
"""
The constructor and initiator.
:return:
"""
# initial setup
super(mainWindow, self).__init__()
self.setupUi(self)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the host address:', QLineEdit.Normal, '140.181.97.133')
# if ok:
# host = str(text)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the port number:', QLineEdit.Normal, '10000')
# if ok:
# port = int(text)
# text, ok = QInputDialog.getText(self, 'Settings', 'Enter the topic number for Dump-Pressure:', QLineEdit.Normal, '10001')
# if ok:
# topic = str(text)
host = '140.181.97.133'
port = 10000
topic = '10001'
self.thread = QThread()
self.zeromq_listener = ZMQListener(host, port)
self.zeromq_listener.moveToThread(self.thread)
self.thread.started.connect(self.zeromq_listener.loop)
self.gas = Wasserstoff()
# self.gasart_label.setText(self.gas.label)
# Connect signals
self.connect_signals()
QTimer.singleShot(0, self.thread.start)
self.show_message('Connected to server: {}:{}'.format(host, port))
def connect_signals(self):
"""
Connects signals.
:return:
"""
# Action about and Action quit will be shown differently in OSX
self.actionAbout.triggered.connect(self.show_about_dialog)
self.actionQuit.triggered.connect(QCoreApplication.instance().quit)
self.zeromq_listener.message.connect(self.signal_received)
# combo box
self.comboBox.currentTextChanged.connect(self.schaffe_passendes_gas_objekt)
@staticmethod
def eformat(f, prec, exp_digits):
s = "%.*e" % (prec, f)
mantissa, exp = s.split('e')
# add 1 to digits as 1 is taken by sign +/-
return "%se%+0*d" % (mantissa, exp_digits + 1, int(exp))
def signal_received(self, message):
l = len(message)
l = l - 1
message = message[2:l]
dichte, temperatur = self.gas.rechne_dichte_aus(message)
label_temperatur = 'Düsentemperatur: ' + str(round(temperatur, 2)) + 'K'
self.label_temperatur.setText(label_temperatur)
self.lcdNumber.setDigitCount(8)
self.lcdNumber.display(dichte)
def closeEvent(self, event):
self.zeromq_listener.running = False
self.thread.quit()
self.thread.wait()
def show_message(self, message):
"""
Implementation of an abstract method:
Show text in status bar
:param message:
:return:
"""
self.statusbar.showMessage(message)
def schaffe_passendes_gas_objekt(self, gasart):
if gasart == 'Helium':
self.gas = Helium()
elif gasart == 'Neon':
self.gas = Neon()
elif gasart == 'Argon':
self.gas = Argon()
elif gasart == 'Krypton':
self.gas = Krypton()
elif gasart == 'Xenon':
self.gas = Xenon()
elif gasart == 'Wasserstoff':
self.gas = Wasserstoff()
elif gasart == 'Deuterium':
self.gas = Deuterium()
elif gasart == 'Stickstoff':
self.gas = Stickstoff()
def show_about_dialog(self):
"""
Show about dialog
:return:
"""
about_dialog = QDialog()
about_dialog.ui = Ui_AbooutDialog()
about_dialog.ui.setupUi(about_dialog)
about_dialog.ui.labelVersion.setText('Version: {}'.format(__version__))
about_dialog.exec_()
about_dialog.show()
