def HighFlowSingleInletTwoCompartmentGadoxetateAnd3DSPGRModel(
xData2DArray, Ve, Kbh, Khe):
try:
exceptionHandler.modelFunctionInfoLogger()
funcName = 'HighFlowSingleInletTwoCompartmentGadoxetateAnd3DSPGRMode'
t = xData2DArray[:, 0]
signalAIF = xData2DArray[:, 1]
# SPGR model parameters
TR = 3.78 / 1000 # Repetition time of dynamic SPGR sequence in seconds
dt = 16 #temporal resolution in sec
t0 = 5 * dt # Duration of baseline scans
FA = 15 #degrees
r1 = 5.9 # Hz/mM
R10a = 1 / 1.500 # Hz
R10t = 1 / 0.800 # Hz
# Precontrast signal
Sa_baseline = np.mean(signalAIF[0:int(t0 / t[1]) - 1])
# Convert to concentrations
R1a = [
Parallel(n_jobs=4)(delayed(fsolve)(spgr3d_func,
x0=0,
args=(FA, TR, R10a, Sa_baseline,
signalAIF[p]))
for p in np.arange(0, len(t)))
]
R1a = np.squeeze(R1a)
concAIF = (R1a - R10a) / r1
c_if = concAIF
Th = (1 - Ve) / Kbh
ce = c_if
ct = Ve * ce + Khe * Th * tools.expconv(Th, t, ce, funcName)
# Convert to signal
St_rel = tools.spgr3d_func_inv(r1, FA, TR, R10t, ct)
return (
St_rel
) #Returns tissue signal relative to the baseline St/St_baseline
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def HighFlowDualInletTwoCompartmentGadoxetateModel(xData2DArray, Fa: float,
Ve: float, Kbh: float,
Khe: float, dummyVariable):
"""This function contains the algorithm for calculating how concentration varies with time
using the High Flow Dual Inlet Two Compartment Gadoxetate Model model.
Input Parameters
----------------
xData2DArray - time and AIF concentration 1D arrays stacked into one 2D array.
Vp - Plasma Volume Fraction (decimal fraction).
Khe - Hepatocyte Uptake Rate (mL/min/mL)
Kbh - 'Biliary Efflux Rate (mL/min/mL)'
Returns
-------
modelConcs - list of calculated concentrations at each of the
time points in array 'time'.
"""
try:
# Logging and exception handling function.
exceptionHandler.modelFunctionInfoLogger()
# In order to use scipy.optimize.curve_fit, time and concentration must be
# combined into one function input parameter, a 2D array, then separated into individual
# 1 D arrays
times = xData2DArray[:, 0]
AIFconcentrations = xData2DArray[:, 1]
VIFconcentrations = xData2DArray[:, 2]
# Calculate Venous Flow Factor, fVFF
fVFF = 1 - Fa
Th = (1 - Ve) / Kbh
# Determine an overall concentration
combinedConcentration = Fa * AIFconcentrations + fVFF * VIFconcentrations
modelConcs = []
modelConcs = (Ve*combinedConcentration + \
Khe*Th*tools.expconv(Th, times, combinedConcentration, 'HighFlowDualInletTwoCompartmentGadoxetateModel'))
return (modelConcs)
# Exception handling and logging code.
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def modelFunctionName(xData2DArray, param1, param2, param3, param4, param5,
constantsString):
try:
exceptionHandler.modelFunctionInfoLogger()
# Unpack SPGR model constants from
# a string representation of a dictionary
# of constants and their values
constantsDict = eval(constantsString)
const1, const2 = \
constantsDict['const1'], constantsDict['const2']
#model logic goes here
#return(Array of concentrations/signals)
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def TRISTAN_Rat_Model_v2_0_7T(xData2DArray, Kbh, Khe,
constantsString):
"""This function contains the algorithm for calculating
how the MR signal from a 3D scan varies with time using the
TRISTAN Rat Model v2.0 at 7T
Input Parameters
----------------
xData2DArray - time (sec) and spleen signal 1D arrays
stacked into one 2D array.
Khe - Hepatocyte Uptake Rate (mL/min/mL)
Kbh - Biliary Efflux Rate (mL/min/mL)
constantsString - String representation of a dictionary
of constant name:value pairs used to convert concentrations
predicted by this model to MR signal values.
Returns
-------
St_rel - list of calculated MR signals at each of the
time points in array 'time'.
"""
try:
exceptionHandler.modelFunctionInfoLogger()
t = xData2DArray[:,0]
Ss = xData2DArray[:,1]
TR = 0.0058
baseline = 4
FA = 20
r1p = 6.4
r1h = 7.6
R10_s = 0.7458
R10_l = 1.3203
ve_s = 0.314
ve_l = 0.230
# Convert to concentrations
# n_jobs set to 1 to turn off parallel processing
# because parallel processing caused a segmentation
# fault in the compiled version of this application.
# This is not a problem in the uncompiled script
R1_s = [Parallel(n_jobs=1)(delayed(fsolve)
(tools.spgr3d_func, x0=0,
args = (FA, TR, R10_s, baseline, Ss[p]))
for p in np.arange(0,len(t)))]
R1_s = np.squeeze(R1_s)
DR1_s = R1_s - R10_s
Th = (1-ve_l)/(Kbh/60)
DR1_l = (ve_l/ve_s)*DR1_s + (r1h/r1p)*((Khe/60)/ve_s)*Th*tools.expconv(Th,t,DR1_s,'TRISTAN_Rat_Model_v2_0_4_7T')
# Convert to signal
c = np.cos(FA*np.pi/180)
R1_l = R10_l + DR1_l
E1 = np.exp(-TR*R1_l)
Sl = (1-E1)/(1-c*E1)
return(Sl) #Returns tissue signal relative to the baseline St/St_baseline
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def HighFlowSingleInletGadoxetate3DSPGR_Rat(xData2DArray, Ve, Kbh, Khe,
constantsString):
"""This function contains the algorithm for calculating
how the MR signal from a 3D scan varies with time using the
High Flow Single Inlet Two Compartment Gadoxetate Model model.
Input Parameters
----------------
xData2DArray - time and AIF concentration 1D arrays
stacked into one 2D array.
Ve - Plasma Volume Fraction (decimal fraction).
Khe - Hepatocyte Uptake Rate (mL/min/mL)
Kbh - Biliary Efflux Rate (mL/min/mL)
constantsString - String representation of a dictionary
of constant name:value pairs used to convert concentrations
predicted by this model to MR signal values.
Returns
-------
St_rel - list of calculated MR signals at each of the
time points in array 'time'.
"""
try:
exceptionHandler.modelFunctionInfoLogger()
t = xData2DArray[:, 0]
Sa = xData2DArray[:, 1]
# Unpack SPGR model constants from
# a string representation of a dictionary
# of constants and their values
constantsDict = eval(constantsString)
TR, baseline, FA, r1, R10a, R10t = \
float(constantsDict['TR']), \
int(constantsDict['baseline']),\
float(constantsDict['FA']), float(constantsDict['r1']), \
float(constantsDict['R10a']), float(constantsDict['R10t'])
# Convert to concentrations
# n_jobs set to 1 to turn off parallel processing
# because parallel processing caused a segmentation
# fault in the compiled version of this application.
# This is not a problem in the uncompiled script
R1a = [
Parallel(n_jobs=1)(delayed(fsolve)(
tools.spgr3d_func, x0=0, args=(FA, TR, R10a, baseline, Sa[p]))
for p in np.arange(0, len(t)))
]
R1a = np.squeeze(R1a)
ca = (R1a - R10a) / r1
# Correct for spleen Ve
ve_spleen = 0.43
ce = ca / ve_spleen
Th = (1 - Ve) / Kbh
ct = Ve * ce + Khe * Th * tools.expconv(
Th, t, ce, 'HighFlowSingleInletGadoxetate3DSPGR_Rat')
# Convert to signal
St_rel = tools.spgr3d_func_inv(r1, FA, TR, R10t, ct)
return (
St_rel
) #Returns tissue signal relative to the baseline St/St_baseline
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def DualInputTwoCompartmentFiltrationModel(xData2DArray, Fa: float, Ve: float,
Fp: float, Kbh: float, Khe: float,
dummyVariable):
"""This function contains the algorithm for calculating how concentration varies with time
using the Dual Input Two Compartment Filtration Model model.
Input Parameters
----------------
xData2DArray - time and AIF concentration 1D arrays stacked into one 2D array.
Vp - Plasma Volume Fraction (decimal fraction).
Fp - Total Plasma Inflow (mL/min/mL)
Khe - Hepatocyte Uptake Rate (mL/min/mL)
Kbh - 'Biliary Efflux Rate (mL/min/mL)'
Returns
-------
modelConcs - list of calculated concentrations at each of the
time points in array 'time'.
"""
try:
# Logging and exception handling function.
exceptionHandler.modelFunctionInfoLogger()
# Used by logging in tools.expconv mathematical operation
# function
funcName = 'DualInputTwoCompartmentFiltrationModel'
# Start of model logic.
# In order to use lmfit curve_fit, time and concentration must be
# combined into one function input parameter, a 2D array,
# then separated into individual 1 D arrays
times = xData2DArray[:, 0]
AIFconcentrations = xData2DArray[:, 1]
VIFconcentrations = xData2DArray[:, 2]
# Calculate Venous Flow Factor, fVFF
fVFF = 1 - Fa
# Determine an overall concentration
combinedConcentration = Fp * (Fa * AIFconcentrations +
fVFF * VIFconcentrations)
# Calculate Intracellular transit time, Th
Th = (1 - Ve) / Kbh
Te = Ve / (Fp + Khe)
alpha = np.sqrt(((1 / Te + 1 / Th) / 2)**2 - 1 / (Te * Th))
beta = (1 / Th - 1 / Te) / 2
gamma = (1 / Th + 1 / Te) / 2
Tc1 = 1 / (gamma - alpha)
Tc2 = 1 / (gamma + alpha)
modelConcs = []
ce = (1/(2*Ve))*( (1+beta/alpha)*Tc1*tools.expconv(Tc1, times, combinedConcentration, funcName + '- 1') + \
(1-beta/alpha)*Tc2*tools.expconv(Tc2, times, combinedConcentration, funcName + '- 2'))
modelConcs = Ve * ce + Khe * Th * tools.expconv(
Th, times, ce, funcName + '- 3')
return (modelConcs)
# Exception handling and logging code.
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def DualInletTwoCompartmentGadoxetateAnd3DSPGRModel(xData2DArray, Fa, Ve, Fp,
Kbh, Khe, constantsString):
try:
exceptionHandler.modelFunctionInfoLogger()
funcName = 'DualInletTwoCompartmentGadoxetateAnd3DSPGRModel'
t = xData2DArray[:, 0]
signalAIF = xData2DArray[:, 1]
signalVIF = xData2DArray[:, 2]
fv = 1 - Fa
# Unpack SPGR model constants from
# a string representation of a dictionary
# of constants and their values
constantsDict = eval(constantsString)
TR, dt, t0, FA, r1, R10a, R10v, R10t = \
constantsDict['TR'], constantsDict['dt'], \
constantsDict['t0'],\
constantsDict['FA'], constantsDict['r1'], \
constantsDict['R10a'], constantsDict['R10v'], \
constantsDict['R10t']
# Precontrast signal
Sa_baseline = np.mean(signalAIF[0:int(t0 / t[1]) - 1])
Sv_baseline = np.mean(signalVIF[0:int(t0 / t[1]) - 1])
# Convert to concentrations
R1a = [
Parallel(n_jobs=4)(delayed(fsolve)(spgr3d_func,
x0=0,
args=(FA, TR, R10a, Sa_baseline,
signalAIF[p]))
for p in np.arange(0, len(t)))
]
R1v = [
Parallel(n_jobs=4)(delayed(fsolve)(spgr3d_func,
x0=0,
args=(FA, TR, R10v, Sv_baseline,
signalVIF[p]))
for p in np.arange(0, len(t)))
]
R1a = np.squeeze(R1a)
R1v = np.squeeze(R1v)
concAIF = (R1a - R10a) / r1
concVIF = (R1v - R10v) / r1
c_if = Fp * (Fa * concAIF + fv * concVIF)
Th = (1 - Ve) / Kbh
Te = Ve / (Fp + Khe)
alpha = np.sqrt(((1 / Te + 1 / Th) / 2)**2 - 1 / (Te * Th))
beta = (1 / Th - 1 / Te) / 2
gamma = (1 / Th + 1 / Te) / 2
# conc = (Ve + Khe(1+Kbh/(vh(1/Tb-1/Th)))exp(-t/Th)-kbhkhe/(vh(1/Tb-1/Th))exp(-t/Tb))*exp(-gamma.t)(cosh(alpha.t)+beta/gamma sinh(alpha.t))*Fp/Ve (Fa concAIF(t)+fv concVIF(t))
# Let ce(t) = exp(-gamma.t)(cosh(alpha.t)+beta/gamma sinh(alpha.t))*c_if(t) then
# conc = (Ve + Khe(1+Kbh/(vh(1/Tb-1/Th)))exp(-t/Th)-kbhkhe/(vh(1/Tb-1/Th))exp(-t/Tb))*ce(t)
Tc1 = 1 / (gamma - alpha)
Tc2 = 1 / (gamma + alpha)
ce = (1 / (2 * Ve)) * (
(1 + beta / alpha) * Tc1 * tools.expconv(Tc1, t, c_if, funcName) +
(1 - beta / alpha) * Tc2 * tools.expconv(Tc2, t, c_if, funcName))
ct = Ve * ce + Khe * Th * tools.expconv(Th, t, ce, funcName)
# Convert to signal
St_rel = tools.spgr3d_func_inv(r1, FA, TR, R10t, ct)
print("Signal from model {} = {}".format(funcName, St_rel))
return (
St_rel
) #Returns tissue signal relative to the baseline St/St_baseline
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
def DualInletTwoCompartmentGadoxetateAnd2DSPGRModel(xData2DArray, Fa, Ve, Fp,
Kbh, Khe):
try:
exceptionHandler.modelFunctionInfoLogger()
funcName = 'DualInletTwoCompartmentGadoxetateAnd2DSPGRModel'
t = xData2DArray[:, 0]
signalAIF = xData2DArray[:, 1]
signalVIF = xData2DArray[:, 2]
fv = 1 - Fa
# Get SPGR model parameters
TR = 3.78 / 1000 # Repetition time of dynamic SPGR sequence in seconds
dt = 16 #temporal resolution in sec
t0 = 5 * dt # Duration of baseline scans
FA = 15 #degrees
r1 = 5.9 # Hz/mM
R10a = 1 / 1.500 # Hz
R10v = 1 / 1.500 # Hz
R10t = 1 / 0.800 # Hz
# Precontrast signal
Sa_baseline = np.mean(signalAIF[0:int(t0 / t[1]) - 1])
Sv_baseline = np.mean(signalVIF[0:int(t0 / t[1]) - 1])
# Convert to concentrations
R1a = [
Parallel(n_jobs=4)(delayed(fsolve)(spgr2d_func,
x0=0,
args=(FA, TR, R10a, Sa_baseline,
signalAIF[p]))
for p in np.arange(0, len(t)))
]
R1v = [
Parallel(n_jobs=4)(delayed(fsolve)(spgr2d_func,
x0=0,
args=(FA, TR, R10v, Sv_baseline,
signalVIF[p]))
for p in np.arange(0, len(t)))
]
R1a = np.squeeze(R1a)
R1v = np.squeeze(R1v)
concAIF = (R1a - R10a) / r1
concVIF = (R1v - R10v) / r1
c_if = Fp * (Fa * concAIF + fv * concVIF)
Th = (1 - Ve) / Kbh
Te = Ve / (Fp + Khe)
alpha = np.sqrt(((1 / Te + 1 / Th) / 2)**2 - 1 / (Te * Th))
beta = (1 / Th - 1 / Te) / 2
gamma = (1 / Th + 1 / Te) / 2
# conc = (Ve + Khe(1+Kbh/(vh(1/Tb-1/Th)))exp(-t/Th)-kbhkhe/(vh(1/Tb-1/Th))exp(-t/Tb))*exp(-gamma.t)(cosh(alpha.t)+beta/gamma sinh(alpha.t))*Fp/Ve (Fa concAIF(t)+fv concVIF(t))
# Let ce(t) = exp(-gamma.t)(cosh(alpha.t)+beta/gamma sinh(alpha.t))*c_if(t) then
# conc = (Ve + Khe(1+Kbh/(vh(1/Tb-1/Th)))exp(-t/Th)-kbhkhe/(vh(1/Tb-1/Th))exp(-t/Tb))*ce(t)
Tc1 = 1 / (gamma - alpha)
Tc2 = 1 / (gamma + alpha)
ce = (1 / (2 * Ve)) * (
(1 + beta / alpha) * Tc1 * tools.expconv(Tc1, t, c_if, funcName) +
(1 - beta / alpha) * Tc2 * tools.expconv(Tc2, t, c_if, funcName))
ct = Ve * ce + Khe * Th * tools.expconv(Th, t, ce, funcName)
# Convert to signal
St_rel = tools.spgr2d_func_inv(r1, FA, TR, R10t, ct)
return (
St_rel
) #Returns tissue signal relative to the baseline St/St_baseline
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)
NewSched_Timer = NewSched_Timer + datetime.timedelta(seconds=int(Play_Interval)) ·
except:
NewSched_Timer = NewSched_Timer + datetime.timedelta(seconds=int(Play_Interval))
#*-----------------FTP取文件模块-----------------------------
if int(IsKDMT)==1:
P3 = threading.Thread(target=FTPMudolar,args=(i,MT_IP,FTP_UN,FTP_PW,FTP_FilePath,path_ftp,FTP_FileNameList,))
P3.setDaemon(True)
P3.start()
#FTPMudolar(i,MT_IP,FTP_UN,FTP_PW,FTP_FilePath,path_ftp,FTP_FileNameList)
#*------------------AEC效果自动预判-----------------------*
P1=threading.Thread(target=AECAnalysis,args=(i,RefTestFileList,UpDateDictTestFile,strFileCapAecName,MinidB,AECMod,))
P1.setDaemon(True)
P1.start()
i=i+1
#调试函数
if __name__=='__main__':
path_ref_file = os.getcwd() + "\\test_file\\"
ConfigDict = Get_config("Config.ini")
Sched_Timer = ConfigDict.get('Sched_Timer')
try:
ExceptionHandling.EH_Get_config()
except:
print "请查看日志文件test.log"
sys.exit(1)
timerFun(Sched_Timer)
print "Test over! Please check the test results!"
def Model_Function_Template(xData2DArray, param1, param2, param3, param4,
param5, constantsString):
"""This function contains the algorithm for calculating
how MR signal varies with time.
Input Parameters
----------------
xData2DArray - time and AIF signal
(and VIR signal if dual inlet model) 1D arrays
stacked into one 2D array.
param1 - model parameter.
param2 - model parameter.
param3 - model parameter.
param4 - model parameter.
param5 - model parameter.
constantsString - String representation of a dictionary
of constant name:value pairs used to convert concentrations
predicted by this model to MR signal values.
Returns
-------
St_rel - list of calculated MR signals at each of the
time points in array 'time'.
"""
try:
exceptionHandler.modelFunctionInfoLogger #please leave
times = xData2DArray[:, 0]
signalAIF = xData2DArray[:, 1]
#Uncheck the next line of code if the model is dual inlet
#and there is a VIF
#signalVIF = xData2DArray[:,2]
# Unpack SPGR model constants from
# a string representation of a dictionary
# of constants and their values.
# If constants are added/removed from the Model Library XML
# file, this section must be updated accordingly
constantsDict = eval(constantsString)
TR, baseline, FA, r1, R10a, R10t = \
float(constantsDict['TR']), \
int(constantsDict['baseline']),\
float(constantsDict['FA']), float(constantsDict['r1']), \
float(constantsDict['R10a']), float(constantsDict['R10t'])
# Convert AIF MR signals to concentrations
# n_jobs set to 1 to turn off parallel processing
# because parallel processing caused a segmentation
# fault in the compiled version of this application.
# This is not a problem in the uncompiled script
R1a = [
Parallel(n_jobs=1)(delayed(fsolve)(tools.spgr2d_func,
x0=0,
args=(r1, FA, TR, R10a,
baseline, signalAIF[p]))
for p in np.arange(0, len(times)))
]
R1a = np.squeeze(R1a)
ca = (R1a - R10a) / r1
###########################################
#
# Add code here to calculate concentration, ct
#
##############################################
# Convert to signal
St_rel = tools.spgr2d_func_inv(r1, FA, TR, R10t, ct)
#Return tissue signal relative to the baseline St/St_baseline
return (St_rel)
#please leave the next 4 lines of code
except ZeroDivisionError as zde:
exceptionHandler.handleDivByZeroException(zde)
except Exception as e:
exceptionHandler.handleGeneralException(e)