def setPause(self, pluginAction, dev):
newValue = pluginAction.props.get(u"pauseRun", False)
m = Magiccolor()
m.connect()
p = Protocol()
p.keyNum=p.MODE_PAUSE
indigo.server.log("%d" % newValue)
if newValue:
p.keyValue=1
else:
p.keyValue=0
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s to %d" % (dev.name, "pause", newValue))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("pauseRun", newValue)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s to %d failed" % (dev.name, "set pause", newValue), isError=True)
def setSpeed(self, pluginAction, dev):
try:
newValue = int(pluginAction.props.get(u"speed", 100))
except ValueError:
# The int() cast above might fail if the user didn't enter a number:
indigo.server.log(u"set speed to device \"%s\" -- invalid value" % (dev.name), isError=True)
return
m = Magiccolor()
m.connect()
p = Protocol()
p.keyNum=p.MODE_SPEED
p.keyValue=newValue
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s to %d" % (dev.name, "set speed", newValue))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("programNumber", newValue)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s to %d failed" % (dev.name, "set speed", newValue), isError=True)
def actionControlDimmerRelay(self, action, dev):
m = Magiccolor()
m.connect()
p = Protocol()
###### TURN ON ######
if action.deviceAction == indigo.kDimmerRelayAction.TurnOn:
# Command hardware module (dev) to turn ON here:
p.keyNum=p.MODE_ON
p.keyValue=p.findProgram("WHITE")
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s" % (dev.name, "on"))
# And then tell the Indigo Server to update the state.
dev.updateStateOnServer("onOffState", True)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s failed" % (dev.name, "on"), isError=True)
###### TURN OFF ######
elif action.deviceAction == indigo.kDimmerRelayAction.TurnOff:
# Command hardware module (dev) to turn OFF here:
p.keyNum=p.MODE_OFF
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" (%s) %s" % (dev.name, dev.address, "off") )
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("onOffState", False)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s failed" % (dev.name, "off"), isError=True)
###### TOGGLE ######
elif action.deviceAction == indigo.kDimmerRelayAction.Toggle:
# Command hardware module (dev) to toggle here:
newOnState = not dev.onState
if newOnState == False:
p.keyNum=p.MODE_OFF
else:
p.keyNum=p.MODE_ON
p.keyValue=p.findProgram("WHITE")
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s" % (dev.name, "toggle"))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("onOffState", newOnState)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s failed" % (dev.name, "toggle"), isError=True)
###### SET BRIGHTNESS ######
elif action.deviceAction == indigo.kDimmerRelayAction.SetBrightness:
# Command hardware module (dev) to set brightness here:
#
# We're kinda lame here. We actually use brightness as a program
# so that the slider works. oh well!
newBrightness = action.actionValue
p.keyNum=p.MODE_ON
p.keyValue=newBrightness
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s to %d" % (dev.name, "set brightness", newBrightness))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("brightnessLevel", newBrightness)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s to %d failed" % (dev.name, "set brightness", newBrightness), isError=True)
###### BRIGHTEN BY ######
elif action.deviceAction == indigo.kDimmerRelayAction.BrightenBy:
# Command hardware module (dev) to do a relative brighten here:
newBrightness = dev.brightness + action.actionValue
p.keyNum=p.MODE_ON
p.keyValue=newBrightness
m.sendMsg(p)
if newBrightness > 100:
newBrightness = 100
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s to %d" % (dev.name, "brighten", newBrightness))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("brightnessLevel", newBrightness)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s to %d failed" % (dev.name, "brighten", newBrightness), isError=True)
###### DIM BY ######
elif action.deviceAction == indigo.kDimmerRelayAction.DimBy:
# Command hardware module (dev) to do a relative dim here:
newBrightness = dev.brightness - action.actionValue
if newBrightness < 0:
newBrightness = 0
p.keyNum=p.MODE_ON
p.keyValue=newBrightness
m.sendMsg(p)
sendSuccess = True # Set to False if it failed.
if sendSuccess:
# If success then log that the command was successfully sent.
indigo.server.log(u"sent \"%s\" %s to %d" % (dev.name, "dim", newBrightness))
# And then tell the Indigo Server to update the state:
dev.updateStateOnServer("brightnessLevel", newBrightness)
else:
# Else log failure but do NOT update state on Indigo Server.
indigo.server.log(u"send \"%s\" %s to %d failed" % (dev.name, "dim", newBrightness), isError=True)
