def OnFileOpen(self, event):
""" File Open Button Press """
# File Filter definition
fileTypesString = _("Text files (*.txt)|*.txt")
# If no config file is defined (ie using default colors) ...
if self.configFile == '':
# ... use the video path and no filename
lastPath = TransanaGlobal.configData.videoPath
filename = ''
# if a config file is defined ...
else:
# ... split it into path and filename
(lastPath, filename) = os.path.split(self.configFile)
# Create a File Open dialog.
fdlg = wx.FileDialog(self, _('Select Color Definition file'), lastPath, filename, fileTypesString,
wx.FD_OPEN | wx.FD_FILE_MUST_EXIST)
# Show the dialog and get user response. If OK ...
if fdlg.ShowModal() == wx.ID_OK:
# Remember the file name locally (not globally yet)
self.configFile = fdlg.GetPath()
# Load the colors from the file
self.colors = TransanaGlobal.getColorDefs(self.configFile)
# If the File Load failed, the file name will have been cleared. Check this!
if TransanaGlobal.configData.colorConfigFilename == '':
self.configFile = ''
# Update the file name label on screen
self.lblFileName.SetLabel(self.configFile)
# Populate the dialog's color list
self.PopulateList()
# Destroy the File Dialog
fdlg.Destroy()
def OnOK(self, event):
""" OK Button Press """
# Save the current values if OK is pressed
self.OnFileSave(event)
# If there was no SAVE because there is no file name, we still want to update the colors. (Normally,
# this happens within FileSave.)
if self.configFile == '':
# Initialize the local internal color list
self.colors = []
# Iterate through the color defs in the dialog's list item
for item in range(self.colorList.GetItemCount()):
# Get the color name from column 0
colorName = self.colorList.GetItem(item, 0).GetText()
# Add the color definition to the local internal color list
self.colors.append((colorName, (int(self.colorList.GetItem(item, 2).GetText()), int(self.colorList.GetItem(item, 3).GetText()), int(self.colorList.GetItem(item, 4).GetText()))))
# Update the colors for all of Transana
TransanaGlobal.transana_graphicsColorList = self.colors
# Update all of the color-related data values needed to make use of the color scheme
(TransanaGlobal.transana_colorNameList, TransanaGlobal.transana_colorLookup, TransanaGlobal.keywordMapColourSet) = \
TransanaGlobal.SetColorVariables()
# Save the config filename in the configuration structure
TransanaGlobal.configData.colorConfigFilename = self.configFile
# indicate that we are closing the form
self.closing = True
# Allow the form's OK event to fire to close the form
event.Skip()
def __init__(self, parent, default_text=""):
"""Initialize an NoteEditor object."""
# Determine the screen size
rect = wx.Display(TransanaGlobal.configData.primaryScreen
).GetClientArea() # wx.ClientDisplayRect()
# We'll make our default window 60% of the size of the screen
self.width = rect[2] * .60
self.height = rect[3] * .60
# Initialize a Dialog object to form our basic window
wx.Dialog.__init__(
self, parent, -1, _("Note"), wx.DefaultPosition,
wx.Size(self.width, self.height),
wx.CAPTION | wx.CLOSE_BOX | wx.SYSTEM_MENU | wx.RESIZE_BORDER)
# Specify the minimium size of this window.
self.SetMinSize((400, 220))
# Add a Note Editor Panel to the dialog
self.pnl = _NotePanel(self, default_text)
# Create a Sizer for the Dialog
dlgSizer = wx.BoxSizer(wx.HORIZONTAL)
# Place the Panel on the Sizer, making it expandable in all directions
dlgSizer.Add(self.pnl, 1, wx.EXPAND | wx.ALL, 2)
# Set the Sizer to the Dialog
self.SetSizer(dlgSizer)
# Center the Dialog on the screen
TransanaGlobal.CenterOnPrimary(self)
def __init__(self, parent, numRecords = 0):
""" Create a Dialog Box to process the Database Conversion.
Parameters: parent Parent Window
numRecords The number of records that will be updated """
# Remember the total number of records passed in, or obtain that number if needed
if numRecords == 0:
self.numRecords = DBInterface.CountItemsWithoutPlainText()
else:
self.numRecords = numRecords
# Create a Dialog Box
wx.Dialog.__init__(self, parent, -1, _("Plain Text Conversion"), size=(600, 350))
# Add the Main Sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Add a gauge based on the number of records to be handled
self.gauge = wx.Gauge(self, -1, numRecords)
mainSizer.Add(self.gauge, 0, wx.EXPAND | wx.LEFT | wx.TOP | wx.RIGHT, 5)
# Add a TextCtrl to provide user information
self.txtCtrl = wx.TextCtrl(self, -1, "", style=wx.TE_LEFT | wx.TE_MULTILINE)
mainSizer.Add(self.txtCtrl, 1, wx.EXPAND | wx.ALL, 5)
# Add a hidden RichTextCrtl used for the conversion process
self.richTextCtrl = TranscriptEditor_RTC.TranscriptEditor(self)
self.richTextCtrl.SetReadOnly(True)
self.richTextCtrl.Enable(False)
# The user doesn't need to see this.
self.richTextCtrl.Show(False)
# Even though we add it to the sizer, it won't show up because of the Show(False).
mainSizer.Add(self.richTextCtrl, 1, wx.EXPAND | wx.ALL, 5)
# Finalize the Dialog layout
self.SetSizer(mainSizer)
self.SetAutoLayout(True)
self.Layout()
# Center the Dialog on the Screen
TransanaGlobal.CenterOnPrimary(self)
def OnFileOpen(self, event):
""" File Open Button Press """
# File Filter definition
fileTypesString = _("Text files (*.txt)|*.txt")
# If no config file is defined (ie using default colors) ...
if self.configFile == '':
# ... use the video path and no filename
lastPath = TransanaGlobal.configData.videoPath
filename = ''
# if a config file is defined ...
else:
# ... split it into path and filename
(lastPath, filename) = os.path.split(self.configFile)
# Create a File Open dialog.
fdlg = wx.FileDialog(self, _('Select Color Definition file'), lastPath, filename, fileTypesString,
wx.FD_OPEN | wx.FD_FILE_MUST_EXIST)
# Show the dialog and get user response. If OK ...
if fdlg.ShowModal() == wx.ID_OK:
# Remember the file name locally (not globally yet)
self.configFile = fdlg.GetPath()
# Load the colors from the file
self.colors = TransanaGlobal.getColorDefs(self.configFile)
# If the File Load failed, the file name will have been cleared. Check this!
if TransanaGlobal.configData.colorConfigFilename == '':
self.configFile = ''
# Update the file name label on screen
self.lblFileName.SetLabel(self.configFile)
# Populate the dialog's color list
self.PopulateList()
# Destroy the File Dialog
fdlg.Destroy()
def __init__(self, parent, title, msg):
# Create a dialog
wx.Dialog.__init__(self, parent, -1, title, size=(350, 150), style=wx.CAPTION | wx.STAY_ON_TOP)
# Add sizers
box = wx.BoxSizer(wx.VERTICAL)
box2 = wx.BoxSizer(wx.HORIZONTAL)
# Add an Info graphic
bitmap = wx.EmptyBitmap(32, 32)
bitmap = wx.ArtProvider_GetBitmap(wx.ART_INFORMATION, wx.ART_MESSAGE_BOX, (32, 32))
graphic = wx.StaticBitmap(self, -1, bitmap)
box2.Add(graphic, 0, wx.EXPAND | wx.ALIGN_CENTER | wx.ALL, 10)
# Add the message
message = wx.StaticText(self, -1, msg)
box2.Add(message, 0, wx.EXPAND | wx.ALIGN_CENTER | wx.ALIGN_CENTER_VERTICAL | wx.ALL, 10)
box.Add(box2, 0, wx.EXPAND)
# Handle layout
self.SetAutoLayout(True)
self.SetSizer(box)
self.Fit()
self.Layout()
# self.CentreOnScreen()
TransanaGlobal.CenterOnPrimary(self)
# Display the Dialog
self.Show()
# Make sure the screen gets fully drawn before continuing. (Needed for SAVE)
try:
wx.Yield()
except:
pass
def __init__(self, parent, msg, dlgTitle=_("Transana Information")):
# This should be easy, right? Just use the OS MessageDialog like so:
# wx.MessageDialog.__init__(self, parent, msg, _("Transana Information"), \
# wx.OK | wx.CENTRE | wx.ICON_INFORMATION)
# That's all there is to it, right?
#
# Yeah, right. Unfortunately, on Windows, this dialog isn't TRULY modal. It's modal to the parent window
# it's called from, but you can still select one of the other Transana Windows and do stuff. This message
# can even get hidden behind other windows, and cause all kinds of problems. According to Robin Dunn,
# writing my own class to do this is the only solution. Here goes.
# Create a wxDialog
wx.Dialog.__init__(self,
parent,
-1,
dlgTitle,
size=(350, 150),
style=wx.CAPTION | wx.CLOSE_BOX | wx.STAY_ON_TOP)
# Create Vertical and Horizontal Sizers
box = wx.BoxSizer(wx.VERTICAL)
box2 = wx.BoxSizer(wx.HORIZONTAL)
# Display the Information graphic in the dialog box
graphic = wx.StaticBitmap(
self, -1, TransanaImages.ArtProv_INFORMATION.GetBitmap())
# Add the graphic to the Sizers
box2.Add(graphic, 0, wx.EXPAND | wx.ALIGN_CENTER | wx.ALL, 10)
# Display the error message in the dialog box
message = wx.StaticText(self, -1, msg)
# Add the information message to the Sizers
box2.Add(
message, 0,
wx.EXPAND | wx.ALIGN_CENTER | wx.ALIGN_CENTER_VERTICAL | wx.ALL,
10)
box.Add(box2, 0, wx.EXPAND)
# Add an OK button
btnOK = wx.Button(self, wx.ID_OK, _("OK"))
# Add the OK button to the Sizers
box.Add(btnOK, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Make the OK button the default
self.SetDefaultItem(btnOK)
# Turn on Auto Layout
self.SetAutoLayout(True)
# Set the form sizer
self.SetSizer(box)
# Set the form size
self.Fit()
# Perform the Layout
self.Layout()
# Center the dialog on the screen
# self.CentreOnScreen()
# That's not working. Let's try this ...
TransanaGlobal.CenterOnPrimary(self)
def __init__(self,parent,id,title):
wx.SetDefaultPyEncoding('utf8')
self.presLan_en = gettext.translation('Transana', 'locale', languages=['en'])
self.presLan_en.install()
lang = wx.LANGUAGE_ENGLISH
self.locale = wx.Locale(lang)
self.locale.AddCatalog("Transana")
# Define the Configuration Data
TransanaGlobal.configData = ConfigData.ConfigData()
# Create the global transana graphics colors, once the ConfigData object exists.
TransanaGlobal.transana_graphicsColorList = TransanaGlobal.getColorDefs(TransanaGlobal.configData.colorConfigFilename)
# Set essential global color manipulation data structures once the ConfigData object exists.
(TransanaGlobal.transana_colorNameList, TransanaGlobal.transana_colorLookup, TransanaGlobal.keywordMapColourSet) = TransanaGlobal.SetColorVariables()
TransanaGlobal.configData.videoPath = 'C:\\Users\\DavidWoods\\Videos'
TransanaGlobal.menuWindow = MenuWindow.MenuWindow(None, -1, title)
self.ControlObject = ControlObjectClass.ControlObject()
self.ControlObject.Register(Menu = TransanaGlobal.menuWindow)
TransanaGlobal.menuWindow.Register(ControlObject = self.ControlObject)
wx.Frame.__init__(self,parent,-1, title, size = (800,600), style=wx.DEFAULT_FRAME_STYLE|wx.NO_FULL_REPAINT_ON_RESIZE)
self.testsRun = 0
self.testsSuccessful = 0
self.testsFailed = 0
mainSizer = wx.BoxSizer(wx.VERTICAL)
self.txtCtrl = wx.TextCtrl(self, -1, "Unit Test: SSL\n\n", style=wx.TE_LEFT | wx.TE_MULTILINE)
self.txtCtrl.AppendText("Transana Version: %s\nsingleUserVersion: %s\n" % (TransanaConstants.versionNumber, TransanaConstants.singleUserVersion))
mainSizer.Add(self.txtCtrl, 1, wx.EXPAND | wx.ALL, 5)
self.SetSizer(mainSizer)
self.SetAutoLayout(True)
self.Layout()
self.CenterOnScreen()
# Status Bar
self.CreateStatusBar()
self.SetStatusText("")
self.Show(True)
try:
self.RunTests()
except:
print
print
print sys.exc_info()[0]
print sys.exc_info()[1]
traceback.print_exc(file=sys.stdout)
if TransanaConstants.DBInstalled in ['MySQLdb-embedded']:
DBInterface.EndSingleUserDatabase()
TransanaGlobal.menuWindow.Destroy()
def CallDisplay(self):
""" Call the parent method (passed in during initialization) that populates the report """
# Get the paper size from the TranscriptPrintoutClass
(paperWidth, paperHeight) = TranscriptPrintoutClass.GetPaperSize()
# Get the current height of the report window
height = self.GetSize()[1]
# Turn off the size hints, so we can resize the window
self.SetSizeHints(-1, -1, -1, -1)
# We need to adjust the size of the display slightly depending on platform.
if '__WXMAC__' in wx.PlatformInfo:
# GetPaperSize() is based on PRINTER, not SCREEN resolution. We need to adjust this on the mac, changing from 72 DPI to 96 DPI
paperWidth = int(paperWidth * 4 / 3)
# Adjust the page size for the right margin and scroll bar
sizeAdjust = 48
# Set the size of the report so that it matches the width of the paper being used (plus the
# line number area and the scroll bar)
self.SetSize(
(paperWidth + self.reportText.lineNumberWidth + sizeAdjust,
height))
# Set Size Hints, so the report can't be resized. (This may not be practical for large paper on small monitors.)
self.SetSizeHints(self.GetSize()[0], int(self.GetSize()[1] * 0.8),
self.GetSize()[0], -1)
# Center on the screen
TransanaGlobal.CenterOnPrimary(self)
# CallDisplay() ALWAYS makes the report Read Only, so change the EDIT button state to NO EDIT ...
self.toolBar.ToggleTool(T_FILE_EDIT, False)
# ... and make the report read-only.
self.reportText.SetReadOnly(True)
# Disable the Font items
self.toolBar.EnableTool(T_FILE_FONT, False)
# The Menu does not exist on the Mac ...
if not '__WXMAC__' in wx.PlatformInfo:
# ... but if we're not on the Mac, disable it!
self.menuFile.Enable(M_FILE_FONT, False)
# Clear the Report
self.reportText.ClearDoc()
# If a Display Method has been defined ...
if self.displayMethod != None:
# ... call it.
self.displayMethod(self.reportText)
# Move the cursor to the beginning of the report
self.reportText.GotoPos(0)
# Bring the Report to the top so it will definitely be visible
self.Raise()
def __init__(self, parent, id, title, quote_object, mergeList=None):
# If no Merge List is passed in ...
if mergeList == None:
# ... use the default Quote Properties Dialog size passed in from the config object. (This does NOT get saved.)
size = TransanaGlobal.configData.quotePropertiesSize
# ... we can enable Quote Change Propagation
propagateEnabled = True
HelpContext = 'Quote Properties'
# If we DO have a merge list ...
else:
# ... increase the size of the dialog to allow for the list of mergeable quotes.
size = (TransanaGlobal.configData.quotePropertiesSize[0],
TransanaGlobal.configData.quotePropertiesSize[1] + 130)
# ... and Quote Change Propagation should be disabled
propagateEnabled = False
HelpContext = 'Quote Merge'
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style. Signal that Propogation is included.
Dialogs.GenForm.__init__(self,
parent,
id,
title,
size=size,
style=wx.DEFAULT_DIALOG_STYLE
| wx.RESIZE_BORDER,
propagateEnabled=propagateEnabled,
useSizers=True,
HelpContext=HelpContext)
if mergeList == None:
# Define the minimum size for this dialog as the initial size
minWidth = 750
minHeight = 570
else:
# Define the minimum size for this dialog as the initial size
minWidth = 750
minHeight = 650
# Remember the Parent Window
self.parent = parent
# Remember the original Quote Object passed in
self.obj = quote_object
# Add a placeholder to the quote object for the merge quote number
self.obj.mergeNumber = 0
# Remember the merge list, if one is passed in
self.mergeList = mergeList
# Initialize the merge item as unselected
self.mergeItemIndex = -1
# if Keywords that server as Keyword Examples are removed, we will need to remember them.
# Then, when OK is pressed, the Keyword Example references in the Database Tree can be removed.
# We can't remove them immediately in case the whole Quote Properties Edit process is cancelled.
self.keywordExamplesToDelete = []
# Initialize a variable to hold merged keyword examples.
self.mergedKeywordExamples = []
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# If we're merging Quotes ...
if self.mergeList != None:
# ... display a label for the Merge Quotes ...
lblMergeQuote = wx.StaticText(self.panel, -1, _("Quote to Merge"))
mainSizer.Add(lblMergeQuote, 0)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 3))
# Create a HORIZONTAL sizer for the merge information
mergeSizer = wx.BoxSizer(wx.HORIZONTAL)
# ... display a ListCtrl for the Merge Quotes ...
self.mergeQuotes = wx.ListCtrl(self.panel,
-1,
size=(300, 100),
style=wx.LC_REPORT
| wx.LC_SINGLE_SEL)
# Add the element to the sizer
mergeSizer.Add(self.mergeQuotes, 1, wx.EXPAND)
# ... bind the Item Selected event for the List Control ...
self.mergeQuotes.Bind(wx.EVT_LIST_ITEM_SELECTED,
self.OnItemSelected)
# ... define the columns for the Merge Quotes ...
self.mergeQuotes.InsertColumn(0, _('Quote Name'))
self.mergeQuotes.InsertColumn(1, _('Collection'))
self.mergeQuotes.InsertColumn(2, _('Start Character'))
self.mergeQuotes.InsertColumn(3, _('End Character'))
self.mergeQuotes.SetColumnWidth(0, 244)
self.mergeQuotes.SetColumnWidth(1, 244)
# ... and populate the Merge Quotes list from the mergeList data
for (QuoteNum, QuoteID, DocumentNum, CollectNum, CollectID,
StartChar, EndChar) in self.mergeList:
index = self.mergeQuotes.InsertStringItem(sys.maxint, QuoteID)
self.mergeQuotes.SetStringItem(index, 1, CollectID)
self.mergeQuotes.SetStringItem(index, 2, u"%s" % StartChar)
self.mergeQuotes.SetStringItem(index, 3, u"%s" % EndChar)
# Add the row sizer to the main vertical sizer
mainSizer.Add(mergeSizer, 3, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Quote ID
self.id_edit = self.new_edit_box(_("Quote ID"),
v1,
self.obj.id,
maxLen=100)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Collection ID
collection_edit = self.new_edit_box(_("Collection ID"), v2,
self.obj.GetNodeString(False))
# Add the element to the sizer
r1Sizer.Add(v2, 2, wx.EXPAND)
collection_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# If the source document is known ...
if self.obj.source_document_num > 0:
try:
tmpSrcDoc = Document.Document(num=self.obj.source_document_num)
srcDocID = tmpSrcDoc.id
tmpLibrary = Library.Library(tmpSrcDoc.library_num)
libraryID = tmpLibrary.id
except TransanaExceptions.RecordNotFoundError:
srcDocID = ''
libraryID = ''
self.obj.source_document_id = 0
except:
print
print sys.exc_info()[0]
print sys.exc_info()[1]
self.obj.source_document_id = 0
srcDocID = ''
libraryID = ''
else:
srcDocID = ''
libraryID = ''
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Library ID
library_edit = self.new_edit_box(_("Library ID"), v3, libraryID)
# Add the element to the sizer
r2Sizer.Add(v3, 1, wx.EXPAND)
library_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Document ID
document_edit = self.new_edit_box(_("Document ID"), v4, srcDocID)
# Add the element to the sizer
r2Sizer.Add(v4, 1, wx.EXPAND)
document_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r4Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Quote Start Character
self.quote_start_edit = self.new_edit_box(_("Quote Start Character"),
v5,
unicode(self.obj.start_char))
# Add the element to the sizer
r4Sizer.Add(v5, 1, wx.EXPAND)
# For merging, we need to remember the merged value of Quote Start Char
self.start_char = self.obj.start_char
self.quote_start_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r4Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Quote End Character
self.quote_end_edit = self.new_edit_box(_("Quote End Character"), v6,
unicode(self.obj.end_char))
# Add the element to the sizer
r4Sizer.Add(v6, 1, wx.EXPAND)
# For merging, we need to remember the merged value of Quote End Char
self.end_char = self.obj.end_char
self.quote_end_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r4Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Quote Length
self.quote_length_edit = self.new_edit_box(
_("Quote Length"), v7,
unicode(self.obj.end_char - self.obj.start_char))
# Add the element to the sizer
r4Sizer.Add(v7, 1, wx.EXPAND)
self.quote_length_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r4Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Comment
comment_edit = self.new_edit_box(_("Comment"),
v8,
self.obj.comment,
maxLen=255)
# Add the element to the sizer
r5Sizer.Add(v8, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
txt = wx.StaticText(self.panel, -1, _("Quote Text"))
mainSizer.Add(txt, 0, wx.BOTTOM, 3)
self.text_edit = TranscriptEditor_RTC.TranscriptEditor(self.panel)
self.text_edit.load_transcript(self.obj)
self.text_edit.SetReadOnly(False)
self.text_edit.Enable(True)
mainSizer.Add(self.text_edit, 6, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r7Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Keyword Group [label]
txt = wx.StaticText(self.panel, -1, _("Keyword Group"))
v9.Add(txt, 0, wx.BOTTOM, 3)
# Keyword Group [list box]
# Create an empty Keyword Group List for now. We'll populate it later (for layout reasons)
self.kw_groups = []
self.kw_group_lb = wx.ListBox(self.panel, -1, choices=self.kw_groups)
v9.Add(self.kw_group_lb, 1, wx.EXPAND)
# Add the element to the sizer
r7Sizer.Add(v9, 1, wx.EXPAND)
# Create an empty Keyword List for now. We'll populate it later (for layout reasons)
self.kw_list = []
wx.EVT_LISTBOX(self, self.kw_group_lb.GetId(), self.OnGroupSelect)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v10 = wx.BoxSizer(wx.VERTICAL)
# Keyword [label]
txt = wx.StaticText(self.panel, -1, _("Keyword"))
v10.Add(txt, 0, wx.BOTTOM, 3)
# Keyword [list box]
self.kw_lb = wx.ListBox(self.panel,
-1,
choices=self.kw_list,
style=wx.LB_EXTENDED)
v10.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX_DCLICK(self, self.kw_lb.GetId(), self.OnAddKW)
# Add the element to the sizer
r7Sizer.Add(v10, 1, wx.EXPAND)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v11 = wx.BoxSizer(wx.VERTICAL)
# Keyword transfer buttons
add_kw = wx.Button(self.panel, wx.ID_FILE2, ">>", wx.DefaultPosition)
v11.Add(add_kw, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self, wx.ID_FILE2, self.OnAddKW)
rm_kw = wx.Button(self.panel, wx.ID_FILE3, "<<", wx.DefaultPosition)
v11.Add(rm_kw, 0, wx.EXPAND | wx.TOP, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnRemoveKW)
kwm = wx.BitmapButton(self.panel, wx.ID_FILE4,
TransanaImages.KWManage.GetBitmap())
v11.Add(kwm, 0, wx.EXPAND | wx.TOP, 10)
kwm.SetToolTipString(_("Keyword Management"))
wx.EVT_BUTTON(self, wx.ID_FILE4, self.OnKWManage)
# Add the element to the sizer
r7Sizer.Add(v11, 0)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v12 = wx.BoxSizer(wx.VERTICAL)
# Quote Keywords [label]
txt = wx.StaticText(self.panel, -1, _("Quote Keywords"))
v12.Add(txt, 0, wx.BOTTOM, 3)
# Quote Keywords [list box]
# Create an empty ListBox. We'll populate it later for layout reasons.
self.ekw_lb = wx.ListBox(self.panel, -1, style=wx.LB_EXTENDED)
v12.Add(self.ekw_lb, 1, wx.EXPAND)
self.ekw_lb.Bind(wx.EVT_KEY_DOWN, self.OnKeywordKeyDown)
# Add the element to the sizer
r7Sizer.Add(v12, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r7Sizer, 8, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# Because of the way Quotes are created (with Drag&Drop / Cut&Paste functions), we have to trap the missing
# ID error here. Therefore, we need to override the EVT_BUTTON for the OK Button.
# Since we don't have an object for the OK Button, we use FindWindowById to find it based on its ID.
self.Bind(wx.EVT_BUTTON, self.OnOK, self.FindWindowById(wx.ID_OK))
# We also need to intercept the Cancel button.
self.Bind(wx.EVT_BUTTON, self.OnCancel,
self.FindWindowById(wx.ID_CANCEL))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Determine which monitor to use and get its size and position
if TransanaGlobal.configData.primaryScreen < wx.Display.GetCount():
primaryScreen = TransanaGlobal.configData.primaryScreen
else:
primaryScreen = 0
rect = wx.Display(primaryScreen).GetClientArea()
# Reset the form's size to be at least the specified minimum width
self.SetSize(
wx.Size(max(minWidth, width), min(max(minHeight, height),
rect[3])))
# Define the minimum size for this dialog as the current size
self.SetSizeHints(max(minWidth, width),
min(max(minHeight, height), rect[3]))
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# We need to set some minimum sizes so the sizers will work right
self.kw_group_lb.SetSizeHints(minW=50, minH=20)
self.kw_lb.SetSizeHints(minW=50, minH=20)
self.ekw_lb.SetSizeHints(minW=50, minH=20)
# We populate the Keyword Groups, Keywords, and Clip Keywords lists AFTER we determine the Form Size.
# Long Keywords in the list were making the form too big!
self.kw_groups = DBInterface.list_of_keyword_groups()
for keywordGroup in self.kw_groups:
self.kw_group_lb.Append(keywordGroup)
# Populate the Keywords ListBox
# Load the parent Collection in order to determine the default Keyword Group
tempCollection = Collection.Collection(self.obj.collection_num)
# Select the Collection Default Keyword Group in the Keyword Group list
if (tempCollection.keyword_group !=
'') and (self.kw_group_lb.FindString(
tempCollection.keyword_group) != wx.NOT_FOUND):
self.kw_group_lb.SetStringSelection(tempCollection.keyword_group)
# If no Default Keyword Group is defined, select the first item in the list
else:
# but only if there IS a first item.
if len(self.kw_groups) > 0:
self.kw_group_lb.SetSelection(0)
# If there's a selected keyword group ...
if self.kw_group_lb.GetSelection() != wx.NOT_FOUND:
# populate the Keywords list
self.kw_list = \
DBInterface.list_of_keywords_by_group(self.kw_group_lb.GetStringSelection())
else:
# If not, create a blank one
self.kw_list = []
for keyword in self.kw_list:
self.kw_lb.Append(keyword)
# Populate the Quote Keywords ListBox
# If the quote object has keywords ...
for quoteKeyword in self.obj.keyword_list:
# ... add them to the keyword list
self.ekw_lb.Append(quoteKeyword.keywordPair)
# Set initial focus to the Quote ID
self.id_edit.SetFocus()
def __init__(self, parent, id, title, ep_object):
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(self, parent, id, title, (550,435), style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext='Episode Properties')
# Remember the Parent Window
self.parent = parent
self.obj = ep_object
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Episode ID
self.id_edit = self.new_edit_box(_("Episode ID"), v1, self.obj.id, maxLen=100)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Library ID layout
series_edit = self.new_edit_box(_("Library ID"), v2, self.obj.series_id)
# Add the element to the sizer
r2Sizer.Add(v2, 2, wx.EXPAND)
series_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r2Sizer.Add((10, 0))
# Dialogs.GenForm does not provide a Masked text control, so the Date
# Field is handled differently than other fields.
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Date [label]
date_lbl = wx.StaticText(self.panel, -1, _("Date (MM/DD/YYYY)"))
v3.Add(date_lbl, 0, wx.BOTTOM, 3)
# Date
# Use the Masked Text Control (Requires wxPython 2.4.2.4 or later)
# TODO: Make Date autoformat localizable
self.dt_edit = wx.lib.masked.TextCtrl(self.panel, -1, '', autoformat='USDATEMMDDYYYY/')
v3.Add(self.dt_edit, 0, wx.EXPAND)
# If a Date is know, load it into the control
if (self.obj.tape_date != None) and (self.obj.tape_date != '') and (self.obj.tape_date != '01/01/0'):
self.dt_edit.SetValue(self.obj.tape_date)
# Add the element to the sizer
r2Sizer.Add(v3, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Length
self.len_edit = self.new_edit_box(_("Length"), v4, self.obj.tape_length_str())
# Add the element to the sizer
r2Sizer.Add(v4, 1, wx.EXPAND)
self.len_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Media Filename(s) [label]
txt = wx.StaticText(self.panel, -1, _("Media Filename(s)"))
mainSizer.Add(txt, 0, wx.BOTTOM, 3)
# Create a HORIZONTAL sizer for the next row
r3Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Media Filename(s)
# If the media filename path is not empty, we should normalize the path specification
if self.obj.media_filename == '':
filePath = self.obj.media_filename
else:
filePath = os.path.normpath(self.obj.media_filename)
# Initialize the list of media filenames with the first one.
self.filenames = [filePath]
# For each additional Media file ...
for vid in self.obj.additional_media_files:
# ... add it to the filename list
self.filenames.append(vid['filename'])
self.fname_lb = wx.ListBox(self.panel, -1, wx.DefaultPosition, wx.Size(180, 60), self.filenames)
# Add the element to the sizer
r3Sizer.Add(self.fname_lb, 5, wx.EXPAND)
self.fname_lb.SetDropTarget(ListBoxFileDropTarget(self.fname_lb))
# Add a horizontal spacer to the row sizer
r3Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Add File button layout
addFile = wx.Button(self.panel, wx.ID_FILE1, _("Add File"), wx.DefaultPosition)
v4.Add(addFile, 0, wx.EXPAND | wx.BOTTOM, 3)
wx.EVT_BUTTON(self, wx.ID_FILE1, self.OnBrowse)
# Remove File button layout
removeFile = wx.Button(self.panel, -1, _("Remove File"), wx.DefaultPosition)
v4.Add(removeFile, 0, wx.EXPAND | wx.BOTTOM, 3)
wx.EVT_BUTTON(self, removeFile.GetId(), self.OnRemoveFile)
if TransanaConstants.proVersion:
# SynchronizeFiles button layout
synchronize = wx.Button(self.panel, -1, _("Synchronize"), wx.DefaultPosition)
v4.Add(synchronize, 0, wx.EXPAND)
synchronize.Bind(wx.EVT_BUTTON, self.OnSynchronize)
# Add the element to the sizer
r3Sizer.Add(v4, 1, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
r3Sizer.Add((2, 0))
# Add the row sizer to the main vertical sizer
mainSizer.Add(r3Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r4Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Comment
comment_edit = self.new_edit_box(_("Comment"), v5, self.obj.comment, maxLen=255)
# Add the element to the sizer
r4Sizer.Add(v5, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r4Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Keyword Group [label]
txt = wx.StaticText(self.panel, -1, _("Keyword Group"))
v6.Add(txt, 0, wx.BOTTOM, 3)
# Keyword Group [list box]
kw_groups_id = wx.NewId()
# Create an empty Keyword Group List for now. We'll populate it later (for layout reasons)
self.kw_groups = []
self.kw_group_lb = wx.ListBox(self.panel, kw_groups_id, wx.DefaultPosition, wx.DefaultSize, self.kw_groups)
v6.Add(self.kw_group_lb, 1, wx.EXPAND)
# Add the element to the sizer
r5Sizer.Add(v6, 1, wx.EXPAND)
self.kw_list = []
wx.EVT_LISTBOX(self, kw_groups_id, self.OnGroupSelect)
# Add a horizontal spacer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Keyword [label]
txt = wx.StaticText(self.panel, -1, _("Keyword"))
v7.Add(txt, 0, wx.BOTTOM, 3)
# Keyword [list box]
self.kw_lb = wx.ListBox(self.panel, -1, wx.DefaultPosition, wx.DefaultSize, self.kw_list, style=wx.LB_EXTENDED)
v7.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX_DCLICK(self, self.kw_lb.GetId(), self.OnAddKW)
# Add the element to the sizer
r5Sizer.Add(v7, 1, wx.EXPAND)
# Add a horizontal spacer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Keyword transfer buttons
add_kw = wx.Button(self.panel, wx.ID_FILE2, ">>", wx.DefaultPosition)
v8.Add(add_kw, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self.panel, wx.ID_FILE2, self.OnAddKW)
rm_kw = wx.Button(self.panel, wx.ID_FILE3, "<<", wx.DefaultPosition)
v8.Add(rm_kw, 0, wx.EXPAND | wx.TOP, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnRemoveKW)
kwm = wx.BitmapButton(self.panel, wx.ID_FILE4, TransanaImages.KWManage.GetBitmap())
v8.Add(kwm, 0, wx.EXPAND | wx.TOP, 10)
# Add a spacer to increase the height of the Keywords section
v8.Add((0, 60))
kwm.SetToolTipString(_("Keyword Management"))
wx.EVT_BUTTON(self, wx.ID_FILE4, self.OnKWManage)
# Add the element to the sizer
r5Sizer.Add(v8, 0)
# Add a horizontal spacer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Episode Keywords [label]
txt = wx.StaticText(self.panel, -1, _("Episode Keywords"))
v9.Add(txt, 0, wx.BOTTOM, 3)
# Episode Keywords [list box]
# Create an empty ListBox
self.ekw_lb = wx.ListBox(self.panel, -1, wx.DefaultPosition, wx.DefaultSize, style=wx.LB_EXTENDED)
v9.Add(self.ekw_lb, 1, wx.EXPAND)
self.ekw_lb.Bind(wx.EVT_KEY_DOWN, self.OnKeywordKeyDown)
# Add the element to the sizer
r5Sizer.Add(v9, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 5, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Core Data button layout
CoreData = wx.Button(self.panel, -1, _("Core Data"))
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
btnSizer.Add((2, 0))
btnSizer.Add(CoreData, 0)
wx.EVT_BUTTON(self, CoreData.GetId(), self.OnCoreDataClick)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(550, width), max(435, height)))
# Define the minimum size for this dialog as the current size
self.SetSizeHints(max(550, width), max(435, height))
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# We need to set some minimum sizes so the sizers will work right
self.kw_group_lb.SetSizeHints(minW = 50, minH = 20)
self.kw_lb.SetSizeHints(minW = 50, minH = 20)
self.ekw_lb.SetSizeHints(minW = 50, minH = 20)
# We populate the Keyword Groups, Keywords, and Clip Keywords lists AFTER we determine the Form Size.
# Long Keywords in the list were making the form too big!
self.kw_groups = DBInterface.list_of_keyword_groups()
for keywordGroup in self.kw_groups:
self.kw_group_lb.Append(keywordGroup)
# Load the parent Library in order to determine the default Keyword Group
tempLibrary = Library.Library(self.obj.series_id)
# Select the Library Default Keyword Group in the Keyword Group list
if (tempLibrary.keyword_group != '') and (self.kw_group_lb.FindString(tempLibrary.keyword_group) != wx.NOT_FOUND):
self.kw_group_lb.SetStringSelection(tempLibrary.keyword_group)
# If no Default Keyword Group is defined, select the first item in the list
else:
# but only if there IS a first item in the list.
if len(self.kw_groups) > 0:
self.kw_group_lb.SetSelection(0)
if self.kw_group_lb.GetSelection() != wx.NOT_FOUND:
self.kw_list = \
DBInterface.list_of_keywords_by_group(self.kw_group_lb.GetStringSelection())
else:
self.kw_list = []
for keyword in self.kw_list:
self.kw_lb.Append(keyword)
# Populate the ListBox
for episodeKeyword in self.obj.keyword_list:
self.ekw_lb.Append(episodeKeyword.keywordPair)
self.id_edit.SetFocus()
def OnKeyUp(self, event):
""" OnKeyUp event captures the release of keys so they can be processed """
# If ALT and SHIFT are pressed ...
if event.AltDown() and event.ShiftDown():
# ... get the key that was pressed
key = event.GetKeyCode()
# If F11 is pressed, show COMPONENT VERSION information
if (key == wx.WXK_F11) or (key in [ord('S'), ord('s')]):
# Import Python's ctypes, Transana's DBInterface, Python's sys modules, and numpy
import Crypto, ctypes, DBInterface, docx, numpy, paramiko, pyparsing, sys
if sys.platform == 'win32':
sysplat = 'Windows'
sysver = platform.win32_ver()[0]
elif sys.platform == 'darwin':
sysplat = 'Mac OS X'
sysver = platform.mac_ver()[0]
else:
sysplat = sys.platform
sysver = platform.version()
str = 'Platform: %s %s' % (sysplat, sysver)
# Build a string that contains the version information for crucial programming components
str += '\n\nTransana %s uses the following tools:\n\n' % (
TransanaConstants.versionNumber)
if (platform.architecture()[0] == '32bit') or (sys.maxint
== 2**31 - 1):
arc = '32-bit'
elif platform.architecture()[0] == '64bit':
arc = '64-bit'
else:
arc = 'Unknown architecture'
str = '%sPython: %s (%s)\n' % (str, sys.version[:6].strip(),
arc)
if 'unicode' in wx.PlatformInfo:
str2 = 'unicode'
else:
str2 = 'ansi'
str = '%swxPython: %s - %s\n' % (str, wx.VERSION_STRING, str2)
if TransanaConstants.DBInstalled in [
'MySQLdb-embedded', 'MySQLdb-server'
]:
import MySQLdb
str = '%sMySQL for Python: %s\n' % (str,
MySQLdb.__version__)
elif TransanaConstants.DBInstalled in ['PyMySQL']:
import pymysql
str = '%sPyMySQL: %s\n' % (str, pymysql.version_info)
elif TransanaConstants.DBInstalled in ['sqlite3']:
import sqlite3
str = '%ssqlite: %s\n' % (str, sqlite3.version)
else:
str = '%sUnknown Database: Unknown Version\n' % (str, )
if DBInterface._dbref != None:
# Get a Database Cursor
dbCursor = DBInterface._dbref.cursor()
if TransanaConstants.DBInstalled in [
'MySQLdb-embedded', 'MySQLdb-server', 'PyMySQL'
]:
# Query the Database about what Database Names have been defined
dbCursor.execute('SELECT VERSION()')
vs = dbCursor.fetchall()
for v in vs:
str = "%sMySQL: %s\n" % (str, v[0])
str = "%sctypes: %s\n" % (str, ctypes.__version__)
str = "%sCrypto: %s\n" % (str, Crypto.__version__)
str = "%sparamiko: %s\n" % (str, paramiko.__version__)
str = "%snumpy: %s\n" % (str, numpy.__version__)
str = "%spython-docx: %s\n" % (str, docx.__version__)
str = "%slxml: %s\n" % (str, '3.6.0')
str = "%spyparsing: %s\n" % (str, pyparsing.__version__)
str = "%swordcloud: %s\n" % (str, '1.2.1')
str = "%sEncoding: %s\n" % (str, TransanaGlobal.encoding)
str = "%sLanguage: %s\n" % (
str, TransanaGlobal.configData.language)
# Replace the Description text with the version information text
self.description.SetLabel(str)
query = "SELECT COUNT(SeriesNum) FROM Series2"
dbCursor.execute(query)
seriesCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(DocumentNum) FROM Documents2"
dbCursor.execute(query)
documentCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(EpisodeNum) FROM Episodes2"
dbCursor.execute(query)
episodeCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(CoreDataNum) FROM CoreData2"
dbCursor.execute(query)
coreDataCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(TranscriptNum) FROM Transcripts2 WHERE ClipNum = 0"
dbCursor.execute(query)
transcriptCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(CollectNum) FROM Collections2"
dbCursor.execute(query)
collectionCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(quoteNum) FROM Quotes2"
dbCursor.execute(query)
quoteCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(clipNum) FROM Clips2"
dbCursor.execute(query)
clipCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(TranscriptNum) FROM Transcripts2 WHERE ClipNum <> 0"
dbCursor.execute(query)
clipTranscriptCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(SnapshotNum) FROM Snapshots2"
dbCursor.execute(query)
snapshotCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(NoteNum) FROM Notes2"
dbCursor.execute(query)
noteCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(Keyword) FROM Keywords2"
dbCursor.execute(query)
keywordCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(Keyword) FROM ClipKeywords2"
dbCursor.execute(query)
clipKeywordCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(Keyword) FROM SnapshotKeywords2"
dbCursor.execute(query)
snapshotKeywordCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(Keyword) FROM SnapshotKeywordStyles2"
dbCursor.execute(query)
snapshotKeywordStylesCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(AddVidNum) FROM AdditionalVids2"
dbCursor.execute(query)
addVidCount = dbCursor.fetchall()[0][0]
query = "SELECT COUNT(ConfigName) FROM Filters2"
dbCursor.execute(query)
filterCount = dbCursor.fetchall()[0][0]
tmpStr = """Data Records:
Libraries: %s
Documents: %s
Episodes: %s
Episode Transcripts: %s
Collections: %s
Quotes: %s
Clips: %s
Clip Transcripts: %s
Snapshots: %s
Notes: %s
Keywords: %s
Quote/Clip Keywords: %s
Snapshot Keywords: %s
Snapshot Keyword Styles: %s
Additional Videos: %s
Filters: %s
Core Data: %s\n """
data = (seriesCount, documentCount, episodeCount,
transcriptCount, collectionCount, quoteCount,
clipCount, clipTranscriptCount, snapshotCount,
noteCount, keywordCount, clipKeywordCount,
snapshotKeywordCount, snapshotKeywordStylesCount,
addVidCount, filterCount, coreDataCount)
# Eliminate the Credits text
self.credits.SetLabel(tmpStr % data)
self.translations.SetLabel('')
self.ffmpeg.SetLabel('')
# If F12 is pressed ...
elif (key == wx.WXK_F12) or (key in [ord('H'), ord('h')]):
# Replace the Version information text with the original description text
self.description.SetLabel(self.description_str)
# Replace the blank credits text with the original credits text
self.credits.SetLabel(self.credits_str)
self.translations.SetLabel(self.translations_str)
self.ffmpeg.SetLabel(self.ffmpeg_str)
# Fit the window to the altered controls
self.Fit()
TransanaGlobal.CenterOnPrimary(self)
# If ALT and SHIFT aren't both pressed ...
else:
# ... then we don't do anything
pass
def __init__(self,
parent,
errmsg,
dlgCaption=_("Transana Error"),
includeSkipCheck=False):
# This should be easy, right? Just use the OS MessageDialog like so:
# wx.MessageDialog.__init__(self, parent, errmsg, _("Transana Error"), wx.OK | wx.CENTRE | wx.ICON_ERROR)
# That's all there is to it, right?
#
# Yeah, right. Unfortunately, on Windows, this dialog isn't TRULY modal. It's modal to the parent window
# it's called from, but you can still select one of the other Transana Windows and do stuff. This message
# can even get hidden behind other windows, and cause all kinds of problems. According to Robin Dunn,
# writing my own class to do this is the only solution. Here goes.
# Remember if we're supposed to include the checkbox to skip additional messages
self.includeSkipCheck = includeSkipCheck
# Create a Dialog box
wx.Dialog.__init__(self,
parent,
-1,
dlgCaption,
size=(350, 150),
style=wx.CAPTION | wx.CLOSE_BOX | wx.STAY_ON_TOP)
# Set "Window Variant" to small only for Mac to make fonts match better
if "__WXMAC__" in wx.PlatformInfo:
self.SetWindowVariant(wx.WINDOW_VARIANT_SMALL)
# Create Vertical and Horizontal Sizers
box = wx.BoxSizer(wx.VERTICAL)
box2 = wx.BoxSizer(wx.HORIZONTAL)
# Display the Error graphic in the dialog box
graphic = wx.StaticBitmap(self, -1,
TransanaImages.ArtProv_ERROR.GetBitmap())
# Add the graphic to the Sizers
box2.Add(graphic, 0, wx.EXPAND | wx.ALIGN_CENTER | wx.ALL, 10)
# Display the error message in the dialog box
message = wx.StaticText(self, -1, errmsg)
# Add the error message to the Sizers
box2.Add(
message, 0,
wx.EXPAND | wx.ALIGN_CENTER | wx.ALIGN_CENTER_VERTICAL | wx.ALL,
10)
box.Add(box2, 0, wx.EXPAND)
# If we should add the "Skip Further messages" checkbox ...
if self.includeSkipCheck:
# ... then add the checkbox to the dialog
self.skipCheck = wx.CheckBox(self, -1,
_('Do not show this message again'))
# ... and add the checkbox to the Sizers
box.Add(self.skipCheck, 0, wx.ALIGN_CENTER | wx.ALL, 10)
# Add an OK button
btnOK = wx.Button(self, wx.ID_OK, _("OK"))
# Add the OK button to the Sizers
box.Add(btnOK, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Make the OK button the default
self.SetDefaultItem(btnOK)
# Turn on Auto Layout
self.SetAutoLayout(True)
# Set the form sizer
self.SetSizer(box)
# Set the form size
self.Fit()
# Perform the Layout
self.Layout()
# Center the dialog on the screen
# self.CentreOnScreen()
# That's not working. Let's try this ...
TransanaGlobal.CenterOnPrimary(self)
def __init__(self, parent, id, title, note_object):
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(self, parent, id, title, size=(400, 260), style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext='Notes') # 'Notes' is the Help Context for Notes. There is no entry for Note Properties at this time
self.obj = note_object
seriesID = ''
episodeID = ''
transcriptID = ''
collectionID = ''
clipID = ''
snapshotID = ''
documentID = ''
quoteID = ''
if (self.obj.series_num != 0) and (self.obj.series_num != None):
tempLibrary = Library.Library(self.obj.series_num)
seriesID = tempLibrary.id
elif (self.obj.episode_num != 0) and (self.obj.episode_num != None):
tempEpisode = Episode.Episode(self.obj.episode_num)
episodeID = tempEpisode.id
tempLibrary = Library.Library(tempEpisode.series_num)
seriesID = tempLibrary.id
elif (self.obj.transcript_num != 0) and (self.obj.transcript_num != None):
# To save time here, we can skip loading the actual transcript text, which can take time once we start dealing with images!
tempTranscript = Transcript.Transcript(self.obj.transcript_num, skipText=True)
transcriptID = tempTranscript.id
tempEpisode = Episode.Episode(tempTranscript.episode_num)
episodeID = tempEpisode.id
tempLibrary = Library.Library(tempEpisode.series_num)
seriesID = tempLibrary.id
elif (self.obj.collection_num != 0) and (self.obj.collection_num != None):
tempCollection = Collection.Collection(self.obj.collection_num)
collectionID = tempCollection.GetNodeString()
elif (self.obj.clip_num != 0) and (self.obj.clip_num != None):
# We can skip loading the Clip Transcript to save load time
tempClip = Clip.Clip(self.obj.clip_num, skipText=True)
clipID = tempClip.id
tempCollection = Collection.Collection(tempClip.collection_num)
collectionID = tempCollection.GetNodeString()
elif (self.obj.snapshot_num != 0) and (self.obj.snapshot_num != None):
tempSnapshot = Snapshot.Snapshot(self.obj.snapshot_num)
snapshotID = tempSnapshot.id
tempCollection = Collection.Collection(tempSnapshot.collection_num)
collectionID = tempCollection.GetNodeString()
elif (self.obj.document_num != 0) and (self.obj.document_num != None):
tempDocument = Document.Document(self.obj.document_num)
documentID = tempDocument.id
tempLibrary = Library.Library(tempDocument.library_num)
seriesID = tempLibrary.id
elif (self.obj.quote_num != 0) and (self.obj.quote_num != None):
tempQuote = Quote.Quote(num=self.obj.quote_num, skipText=True)
quoteID = tempQuote.id
tempCollection = Collection.Collection(tempQuote.collection_num)
collectionID = tempCollection.GetNodeString()
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Note ID
id_edit = self.new_edit_box(_("Note ID"), v1, self.obj.id, maxLen=100)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Library ID
seriesID_edit = self.new_edit_box(_("Library ID"), v2, seriesID)
# Add the element to the row sizer
r2Sizer.Add(v2, 1, wx.EXPAND)
seriesID_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r3Sizer = wx.BoxSizer(wx.HORIZONTAL)
if TransanaConstants.proVersion:
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Document ID
documentID_edit = self.new_edit_box(_("Document ID"), v9, documentID)
# Add the element to the row sizer
r3Sizer.Add(v9, 1, wx.EXPAND)
documentID_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r3Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Episode ID
episodeID_edit = self.new_edit_box(_("Episode ID"), v3, episodeID)
# Add the element to the row sizer
r3Sizer.Add(v3, 1, wx.EXPAND)
episodeID_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r3Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Transcript ID
transcriptID_edit = self.new_edit_box(_("Transcript ID"), v4, transcriptID)
# Add the element to the row sizer
r3Sizer.Add(v4, 1, wx.EXPAND)
transcriptID_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r3Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Collection ID
collectionID_edit = self.new_edit_box(_("Collection ID"), v5, collectionID)
# Add the element to the row sizer
r5Sizer.Add(v5, 2, wx.EXPAND)
collectionID_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r6Sizer = wx.BoxSizer(wx.HORIZONTAL)
if TransanaConstants.proVersion:
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Quote ID
quoteID_edit = self.new_edit_box(_("Quote ID"), v7, quoteID)
# Add the element to the row sizer
r6Sizer.Add(v7, 1, wx.EXPAND)
quoteID_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r6Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Clip ID
clipID_edit = self.new_edit_box(_("Clip ID"), v6, clipID)
# Add the element to the row sizer
r6Sizer.Add(v6, 1, wx.EXPAND)
clipID_edit.Enable(False)
if TransanaConstants.proVersion:
# Add a horizontal spacer to the row sizer
r6Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Snapshot ID
snapshotID_edit = self.new_edit_box(_("Snapshot ID"), v8, snapshotID)
# Add the element to the row sizer
r6Sizer.Add(v8, 1, wx.EXPAND)
snapshotID_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r6Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r8Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Comment layout
noteTaker_edit = self.new_edit_box(_("Note Taker"), v8, self.obj.author, maxLen=100)
# Add the element to the row sizer
r8Sizer.Add(v8, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r8Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(400, width), height))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(400, width), height, -1, height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# Set focus to the Note ID
id_edit.SetFocus()
def __init__(self, title, data, dataLabels, size=(800, 700)):
""" Create a BarChart.
title Title for the BarChart
data List of data values for the BarChart
dataLabels Matching list of data labels for the BarChart
This module sizes the bitmap for a printed page by default. """
def barXPos(x):
""" Calculate the horizontal center for each bar in pixels """
# numBars, barChartLeft, and barChartWidth are constants in the calling routine
# Calculate the width of each bar
barWidth = barChartWidth / numBars
# Calculate the position of each bar
barXPos = (float(x) /
numBars) * barChartWidth + barWidth / 2 + barChartLeft
# Return the bar center position
return barXPos
def barHeight(x):
""" Calculate the height of each bar in pixels """
# data and barChartHeight are constants in the calling routine
# Determine the size of the largest bar
barMax = max(data)
# Calculate the height of the bar value passed in
barHeight = float(x) / barMax * barChartHeight
# We return 95% of the height value to give the bar chart some white space at the top.
return int(barHeight * 0.95)
def verticalAxisValues(maxVal):
""" Given the maximum value of the axis, determine what values should appear as axis labels.
This method implements the 2-5-10 rule. """
# Initialize a list of values to return
values = []
# Let's normalize the data as part of assigning axis labels
# Initilaize the increment between axis label values
increment = 1
# Initialize the conversion factor for axis labels, used in handling large values
convertFactor = 1
# While our maxValue is over 100 ...
while maxVal > 100:
# ... reduce the maximum value by a factor of 10 ...
maxVal /= 10
# ... and increase our conversion factor by a factor of 10.
convertFactor *= 10
# If our normalized max value is over 50 ...
if maxVal > 50:
# ... increments of 10 will give us between 5 and 10 labels
increment = 10
# If our normalized max value is between 20 and 50 ...
elif maxVal > 20:
# ... increments of 5 will give us between 4 and 10 labels
increment = 5
# If our normalized max value is between 8 and 20 ...
elif maxVal > 8:
# ... increments of 2 will give us between 4 and 10 labels
increment = 2
# If our normalized max value is 8 or less ...
else:
# ... increments of 1 will five us between 1 and 8 labels.
increment = 1
# for values between 0 and our max value (plus 1 to include the mac value if a multiple of 10) space by increment ...
for x in range(0, maxVal + 1, increment):
# ... add the incremental value multiplied by the conversion factor to our list of axis labels
values.append(x * convertFactor)
# Return the list of axis labels
return values
# Get the Graphic Dimensions
(imgWidth, imgHeight) = size
# Create an empty bitmap
self.bitmap = wx.EmptyBitmap(imgWidth, imgHeight)
# Get the Device Context for that bitmap
self.dc = wx.BufferedDC(None, self.bitmap)
# The length of data is the number of bars we need
numBars = len(data)
# Determine the longest bar label
# Define the label font size
axisLabelFontSize = 11
# Define a Font for axis labels
font = wx.Font(axisLabelFontSize, wx.FONTFAMILY_DEFAULT, wx.NORMAL,
wx.NORMAL, False)
# Set the Font for the DC
self.dc.SetFont(font)
# Initize the max width variable
maxWidth = 0
# For each bar label ...
for x in range(numBars):
# ... determine the size of the label
(txtWidth, txtHeight) = self.dc.GetTextExtent(dataLabels[x])
# See if it's bigger than previous labels
maxWidth = max(txtWidth, maxWidth)
# Give a left margin of 70 pixels for the vertical axis labels
barChartLeft = 70
# The width of the bar chart will be the image width less the left margin and 25 pixels for right margin
barChartWidth = imgWidth - barChartLeft - 25
# Give a top margin of 50 pixels to have room for the chart title
if title != '':
barChartTop = 50
# or 20 pixels if there is no title
else:
barChartTop = 20
# Reserve almost HALF the image for bar labels. (Transana uses LONG labels!)
barChartHeight = max(imgHeight / 2,
imgHeight - maxWidth - barChartTop - 30)
# Initialize a colorIndex to track what color to assign each bar
colorIndx = 0
# Define the colors to be used in the BarChart
# If we're running stand-alone ...
if __name__ == '__main__':
# ... use generic colors
colors = [
'#FF0000', '#00FF00', '#0000FF', '#666600', '#FF00FF',
'#00FFFF', '#440000', '#004400', '#000044'
]
# There are no defined Colors for Keywords when running stand-alone
colorsForKeywords = {}
# If we're running inside Transana ...
else:
# ... import Transana's Global Values ...
import TransanaGlobal
# ... and use Transana's defined color scheme
colorList = TransanaGlobal.getColorDefs(
TransanaGlobal.configData.colorConfigFilename)[:-1]
# Initialize the Colors list
colors = []
# Populate the colors list from Transana's defined colors
for colorName, colorDef in colorList:
colors.append(colorDef)
# Get the color definitions for all keywords in Transana with defined colors
colorsForKeywords = DBInterface.dict_of_keyword_colors()
# Define a white brush as the DC Background
self.dc.SetBackground(wx.Brush((255, 255, 255)))
# Clear the Image (uses the Brush)
self.dc.Clear()
# Draw a border around the whole bitmap
# Set the DC Pen
self.dc.SetPen(wx.Pen((0, 0, 0), 2, wx.SOLID))
# Draw an outline around the whole graphic
self.dc.DrawRectangle(1, 1, imgWidth - 1, imgHeight - 1)
# Place the Title on the DC
# Define a Font
font = wx.Font(18, wx.FONTFAMILY_DEFAULT, wx.NORMAL, wx.NORMAL, False)
# Set the Font for the DC
self.dc.SetFont(font)
# Set the Text Foreground Color to Black
self.dc.SetTextForeground(wx.Colour(0, 0, 0))
# Determine the size of the title text
(titleWidth, titleHeight) = self.dc.GetTextExtent(title)
# Add the Title to the Memory DC (and therefore the bitmap)
self.dc.DrawText(title, imgWidth / 2 - titleWidth / 2, 10)
# Define a Font for axis labels
font = wx.Font(axisLabelFontSize, wx.FONTFAMILY_DEFAULT, wx.NORMAL,
wx.NORMAL, False)
# Set the Font for the DC
self.dc.SetFont(font)
# Draw Axes
# Draw an outline around the Bar Chart area with just a little extra width so it looks better
self.dc.DrawRectangle(barChartLeft - 3, barChartTop, barChartWidth + 6,
barChartHeight)
# Get the values that should be used for the vertical axis labels
axisValues = verticalAxisValues(max(data))
# For each axis label ...
for x in axisValues:
# ... draw a pip at the value
self.dc.DrawLine(barChartLeft - 8,
barChartTop + barChartHeight - barHeight(x) - 1,
barChartLeft - 3,
barChartTop + barChartHeight - barHeight(x) - 1)
# Convert the axis value to right-justified text
axisLbl = "%10d" % x
# Determine the size of the axis label
(txtWidth, txtHeight) = self.dc.GetTextExtent(axisLbl)
# Add the text to the drawing at just the right position
self.dc.DrawText(
axisLbl, barChartLeft - txtWidth - 13,
barChartTop + barChartHeight - barHeight(x) - txtHeight / 2)
# For each bar in the bar chart ...
for x in range(numBars):
# ... draw the pips for the bar labels
self.dc.DrawLine(barXPos(x), barChartTop + barChartHeight,
barXPos(x), barChartTop + barChartHeight + 3)
# If there's a color defined for the Keyword ...
if dataLabels[x] in colorsForKeywords.keys():
# ... use that color
color = colorsForKeywords[dataLabels[x]]['colorDef']
# If there's no color defined ...
else:
# ... use the next color from the color list
color = colors[colorIndx]
# Increment or reset the color index
if colorIndx >= len(colors) - 1:
colorIndx = 0
else:
colorIndx += 1
# Label the bars
# Set the Text Foreground Color
self.dc.SetTextForeground(color)
# Get the size of the bar label
(txtWidth, txtHeight) = self.dc.GetTextExtent(dataLabels[x])
# Add the bar label to the bar chart
self.dc.DrawRotatedText(dataLabels[x],
barXPos(x) + (txtHeight / 2),
barChartTop + barChartHeight + 10, 270)
# Calculate bar width as 80% of the width a bar would be with no whitespace between bars
barWidth = float(barChartWidth) / numBars * 0.8
# Set the Brush color to the color to be used for the bar
self.dc.SetBrush(wx.Brush(color))
# Draw the actual bar. 3 extra points compensates for the line thickness.
self.dc.DrawRectangle(
barXPos(x) - barWidth / 2 + 1,
barChartTop + barChartHeight - barHeight(data[x]) - 3,
barWidth,
barHeight(data[x]) + 3)
def __init__(self, parent, id, title, coll_object):
self.width = 400
self.height = 210
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(self, parent, id, title, (self.width, self.height), style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext='Collection Properties')
self.obj = coll_object
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Collection ID
id_edit = self.new_edit_box(_("Collection ID"), v1, self.obj.id, maxLen=100)
# Add the element to the row sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Owner
owner_edit = self.new_edit_box(_("Owner"), v2, self.obj.owner, maxLen=100)
# Add the element to the row sizer
r1Sizer.Add(v2, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Comment
comment_edit = self.new_edit_box(_("Comment"), v3, self.obj.comment, maxLen=255)
# Add the element to the row sizer
r2Sizer.Add(v3, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r3Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Default KW Group
self.kw_groups = DBInterface.list_of_keyword_groups()
self.kwg_choice = self.new_choice_box(_("Default Keyword Group"), v4, [""] + self.kw_groups, 0)
# Add the element to the row sizer
r3Sizer.Add(v4, 1, wx.EXPAND)
if (self.obj.keyword_group) and (self.kwg_choice.FindString(self.obj.keyword_group) != wx.NOT_FOUND):
self.kwg_choice.SetStringSelection(self.obj.keyword_group)
else:
self.kwg_choice.SetSelection(0)
if self.obj.parent <> 0:
# Add a horizontal spacer to the row sizer
r3Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Parent Collection Name
coll_parent_edit = self.new_edit_box(_("Parent Collection"), v5, self.obj.parentName)
# Add the element to the row sizer
r3Sizer.Add(v5, 1, wx.EXPAND)
coll_parent_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r3Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(self.width, width), height))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(self.width, width), height, -1, height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# Set focus to Series ID
id_edit.SetFocus()
def OnInit(self):
""" Initialize the application """
# If we have a Workshop Version, see if the version is still valid, report to the user and exit if not.
# NOTE: This code just provides a user message and clean exit. Transana will still be disabled if this
# code is removed. (This code is user-accessible on OS X!)
if TransanaConstants.workshopVersion:
import datetime
t1 = TransanaConstants.startdate
t2 = TransanaConstants.expirationdate
t3 = time.localtime()
t4 = datetime.datetime(t3[0], t3[1], t3[2], t3[3], t3[4])
if (t1 > t4) or (t2 < t4):
dlg = Dialogs.ErrorDialog(None, "This copy of Transana is no longer valid.")
dlg.ShowModal()
dlg.Destroy
return False
# In wxPython, you used to be able to initialize the ConfigData object in the TransanaGlobal module, even though the
# wx.App() hadn't been initialized yet. Moving from wxPython 2.8.1 to wxPython 2.8.9, this stopped being true
# at least on the Mac. Therefore, we moved creation of the ConfigData object to here in the code.
# However, there are MANY references to ConfigData being in the TransanaGlobal module, so that's where we'll keep it.
TransanaGlobal.configData = ConfigData.ConfigData()
# If we are running from a BUILD instead of source code ...
if hasattr(sys, "frozen"): # or ('wxMac' in wx.PlatformInfo):
# See if the Default Profile Path exists. If not ...
if not os.path.exists(TransanaGlobal.configData.GetDefaultProfilePath()):
# ... then create it (recursively).
os.makedirs(TransanaGlobal.configData.GetDefaultProfilePath())
# Build the path for the error log
path = os.path.join(TransanaGlobal.configData.GetDefaultProfilePath(), "Transana_Error.log")
# redirect output to the error log
self.RedirectStdio(filename=path)
# Put a startup indicator in the Error Log
print "Transana started:", time.asctime()
# If no Language is defined ...
if TransanaGlobal.configData.language == "":
# ... then we know this is the first startup for this user profile. Remember that!
firstStartup = True
# If language is known ...
else:
# ... then it's NOT first time startup.
firstStartup = False
# Now that we've loaded the Configuration Data, we can see if we need to alter the default encoding
# If we're on Windows, single-user, using Russian, use KOI8r encoding instead of Latin-1,
# Chinese uses big5, Japanese uses cp932, and Korean uses cp949
## if ('wxMSW' in wx.PlatformInfo) and (TransanaConstants.singleUserVersion):
## if (TransanaGlobal.configData.language == 'ru'):
## TransanaGlobal.encoding = 'koi8_r'
## elif (TransanaGlobal.configData.language == 'zh'):
## TransanaGlobal.encoding = TransanaConstants.chineseEncoding
## elif (TransanaGlobal.configData.language == 'el'):
## TransanaGlobal.encoding = 'iso8859_7'
## elif (TransanaGlobal.configData.language == 'ja'):
## TransanaGlobal.encoding = 'cp932'
## elif (TransanaGlobal.configData.language == 'ko'):
## TransanaGlobal.encoding = 'cp949'
# Use UTF-8 Encoding throughout Transana to allow maximum internationalization
if ("unicode" in wx.PlatformInfo) and (wx.VERSION_STRING >= "2.6"):
wx.SetDefaultPyEncoding("utf_8")
# On OS/X, change the working directory to the directory the script is
# running from, this is necessary for running from a bundle.
if "__WXMAC__" in wx.PlatformInfo:
if TransanaGlobal.programDir != "":
os.chdir(TransanaGlobal.programDir)
import MenuWindow # import Menu Window Object
sys.excepthook = transana_excepthook # Define the system exception handler
# First, determine the program name that should be displayed, single or multi-user
if TransanaConstants.singleUserVersion:
if TransanaConstants.proVersion:
programTitle = _("Transana - Professional")
else:
programTitle = _("Transana - Standard")
else:
programTitle = _("Transana - Multiuser")
# Ammend the program title for the Demo version if appropriate
if TransanaConstants.demoVersion:
programTitle += _(" - Demonstration")
# Create the Menu Window
TransanaGlobal.menuWindow = MenuWindow.MenuWindow(None, -1, programTitle)
# Create the global transana graphics colors, once the ConfigData object exists.
TransanaGlobal.transana_graphicsColorList = TransanaGlobal.getColorDefs(
TransanaGlobal.configData.colorConfigFilename
)
# Set essential global color manipulation data structures once the ConfigData object exists.
(
TransanaGlobal.transana_colorNameList,
TransanaGlobal.transana_colorLookup,
TransanaGlobal.keywordMapColourSet,
) = TransanaGlobal.SetColorVariables()
# Add the RTF modules to the Python module search path. This allows
# us to import from a directory other than the standard search paths
# and the current directory/subdirectories.
sys.path.append("rtf")
# Load the Splash Screen graphic
bitmap = TransanaImages.splash.GetBitmap()
# We need to draw the Version Number onto the Splash Screen Graphic.
# First, create a Memory DC
memoryDC = wx.MemoryDC()
# Select the bitmap into the Memory DC
memoryDC.SelectObject(bitmap)
# Build the Version label
if TransanaConstants.singleUserVersion:
if TransanaConstants.labVersion:
versionLbl = _("Computer Lab Version")
elif TransanaConstants.demoVersion:
versionLbl = _("Demonstration Version")
elif TransanaConstants.workshopVersion:
versionLbl = _("Workshop Version")
else:
if TransanaConstants.proVersion:
versionLbl = _("Professional Version")
else:
versionLbl = _("Standard Version")
else:
versionLbl = _("Multi-user Version")
versionLbl += " %s"
# Determine the size of the version text
(verWidth, verHeight) = memoryDC.GetTextExtent(versionLbl % TransanaConstants.versionNumber)
# Add the Version Number text to the Memory DC (and therefore the bitmap)
memoryDC.DrawText(versionLbl % TransanaConstants.versionNumber, 370 - verWidth, 156)
# Clear the bitmap from the Memory DC, thus freeing it to be displayed!
memoryDC.SelectObject(wx.EmptyBitmap(10, 10))
# If the Splash Screen Graphic exists, display the Splash Screen for 4 seconds.
# If not, raise an exception.
if bitmap:
# Mac requires a different style, as "STAY_ON_TOP" adds a header to the Splash Screen
if "__WXMAC__" in wx.PlatformInfo:
splashStyle = wx.SIMPLE_BORDER
else:
splashStyle = wx.SIMPLE_BORDER | wx.STAY_ON_TOP
# If we have a Right-To-Left language ...
if TransanaGlobal.configData.LayoutDirection == wx.Layout_RightToLeft:
# ... we need to reverse the image direcion
bitmap = bitmap.ConvertToImage().Mirror().ConvertToBitmap()
splashPosition = wx.DefaultPosition
## This doesn't work. I have not been able to put the Splash Screen anywhere but on the Center of
## Monitor 0 (with wx.SPASH_CENTER_ON_SCREEN) or the upper left corner of Monitor 0 (without it). Bummer.
## # Get the Size and Position for the PRIMARY screen
## (x1, y1, w1, h1) = wx.Display(TransanaGlobal.configData.primaryScreen).GetClientArea()
## (x2, y2) = bitmap.GetSize()
##
## splashPosition = (int(float(w1) / 2.0) + x1 - int(float(x2) / 2.0),
## int(float(h1) / 2.0) + y1 - int(float(y2) / 2.0))
##
## print "Splash Screen Position:"
## print TransanaGlobal.configData.primaryScreen
## print x1, y1, w1, h1
## print x2, y2
## print splashPosition
## print
# Create the SplashScreen object
splash = wx.SplashScreen(
bitmap,
wx.SPLASH_CENTER_ON_SCREEN | wx.SPLASH_TIMEOUT,
4000,
None,
-1,
splashPosition,
wx.DefaultSize,
splashStyle,
)
else:
raise ImageLoadError, _("Unable to load Transana's splash screen image. Installation error?")
wx.Yield()
if DEBUG:
print "Number of Monitors:", wx.Display.GetCount()
for x in range(wx.Display.GetCount()):
print " ", x, wx.Display(x).IsPrimary(), wx.Display(x).GetGeometry(), wx.Display(x).GetClientArea()
print
import DataWindow # import Data Window Object
import VideoWindow # import Video Window Object
# import Transcript Window Object
if TransanaConstants.USESRTC:
import TranscriptionUI_RTC as TranscriptionUI
else:
import TranscriptionUI
import VisualizationWindow # import Visualization Window Object
import exceptions # import exception handler (Python)
# if we're running the multi-user version of Transana ...
if not TransanaConstants.singleUserVersion:
# ... import the Transana ChatWindow module
import ChatWindow
# Initialize all main application Window Objects
# If we're running the Lab version OR we're on the Mac ...
if TransanaConstants.labVersion or ("wxMac" in wx.PlatformInfo):
# ... then pausing for 4 seconds delays the appearance of the Lab initial configuration dialog
# or the Mac version login / database dialog until the Splash screen closes.
time.sleep(4)
# If we are running the Lab version ...
if TransanaConstants.labVersion:
# ... we want an initial configuration screen. Start by importing Transana's Option Settings dialog
import OptionsSettings
# Initialize all paths to BLANK for the lab version
TransanaGlobal.configData.videoPath = ""
TransanaGlobal.configData.visualizationPath = ""
TransanaGlobal.configData.databaseDir = ""
# Create the config dialog for the Lab initial configuration
options = OptionsSettings.OptionsSettings(TransanaGlobal.menuWindow, lab=True)
options.Destroy()
wx.Yield()
# If the databaseDir is blank, user pressed CANCEL ...
if TransanaGlobal.configData.databaseDir == "":
# ... and we should quit immediately, signalling failure
return False
# initialze a variable indicating database connection to False (assume the worst.)
connectionEstablished = False
# Let's trap the situation where the database folder is not available.
try:
# Start MySQL if using the embedded version
if TransanaConstants.singleUserVersion:
DBInterface.InitializeSingleUserDatabase()
# If we get here, we've been successful! (NOTE that MU merely changes our default from False to True!)
connectionEstablished = True
except:
if DEBUG:
import traceback
print sys.exc_info()[0], sys.exc_info()[1]
traceback.print_exc(file=sys.stdout)
msg = _(
'Transana is unable to access any Database at "%s".\nPlease check to see if this path is available.'
)
if not TransanaConstants.labVersion:
msg += "\n" + _("Would you like to restore the default Database path?")
if ("unicode" in wx.PlatformInfo) and isinstance(msg, str):
msg = unicode(msg, "utf8")
msg = msg % TransanaGlobal.configData.databaseDir
if TransanaConstants.labVersion:
dlg = Dialogs.ErrorDialog(None, msg)
dlg.ShowModal()
dlg.Destroy()
return False
# If we're on the Single-user version for Windows ...
if TransanaConstants.singleUserVersion:
# ... determine the file name for the data conversion information pickle file
fs = os.path.join(TransanaGlobal.configData.databaseDir, "260_300_Convert.pkl")
# If there is data in mid-conversion ...
if os.path.exists(fs):
# ... get the conversion data from the Pickle File
f = file(fs, "r")
# exportedDBs is a dictionary containing the Transana-XML file name and the encoding of each DB to be imported
self.exportedDBs = pickle.load(f)
# Close the pickle file
f.close()
# Prompt the user about importing the converted data
prompt = unicode(
_(
"Transana has detected one or more databases ready for conversion.\nDo you want to convert those databases now?"
),
"utf8",
)
tmpDlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow, prompt, _("Database Conversion"))
result = tmpDlg.LocalShowModal()
tmpDlg.Destroy()
# If the user wants to do the conversion now ...
if result == wx.ID_YES:
# ... import Transana's XML Import code
import XMLImport
# Before we go further, let's make sure none of the conversion files have ALREADY been imported!
# The 2.42 to 2.50 Data Conversion Utility shouldn't allow this, but it doesn't hurt to check.
# Iterate through the conversion data
for key in self.exportedDBs:
# Determine the file path for the converted database
newDBPath = os.path.join(TransanaGlobal.configData.databaseDir, key + ".db")
# If the converted database ALREADY EXISTS ...
if os.path.exists(newDBPath):
# ... create an error message
prompt = unicode(
_('Database "%s" already exists.\nDatabase "%s" cannot be converted at this time.'),
"utf8",
)
# ... display an error message
tmpDlg = Dialogs.ErrorDialog(None, prompt % (key, key))
tmpDlg.ShowModal()
tmpDlg.Destroy()
# If the converted database does NOT exist ...
else:
if "wxMac" in wx.PlatformInfo:
prompt = _(
'Converting "%s"\nThis process may take a long time, depending on how much data this database contains.\nWe cannot provide progress feedback on OS X. Please be patient.'
)
progWarn = Dialogs.PopupDialog(None, _("Converting Databases"), prompt % key)
# Create the Import Database, passing the database name so the user won't be prompted for one.
DBInterface.establish_db_exists(dbToOpen=key, usePrompt=False)
# Import the database.
# First, create an Import Database dialog, but don't SHOW it.
temp = XMLImport.XMLImport(
TransanaGlobal.menuWindow,
-1,
_("Transana XML Import"),
importData=self.exportedDBs[key],
)
# ... Import the requested data!
temp.Import()
# Close the Import Database dialog
temp.Close()
if "wxMac" in wx.PlatformInfo:
progWarn.Destroy()
progWarn = None
# Close the database that was just imported
DBInterface.close_db()
# Clear the current database name from the Config data
TransanaGlobal.configData.database = ""
# If we do NOT have a localhost key (which Lab version does not!) ...
if not TransanaGlobal.configData.databaseList.has_key("localhost"):
# ... let's create one so we can pass the converted database name!
TransanaGlobal.configData.databaseList["localhost"] = {}
TransanaGlobal.configData.databaseList["localhost"]["dbList"] = []
# Update the database name
TransanaGlobal.configData.database = key
# Add the new (converted) database name to the database list
TransanaGlobal.configData.databaseList["localhost"]["dbList"].append(key.encode("utf8"))
# Start exception handling
try:
# If we're NOT in the lab version of Transana ...
if not TransanaConstants.labVersion:
# This is harder than it should be because of a combination of encoding and case-changing issues.
# Let's iterate through the Version 2.5 "paths by database" config data
for key2 in TransanaGlobal.configData.pathsByDB2.keys():
# If we have a LOCAL database with a matching key to the database being imported ...
if (
(key2[0] == "")
and (key2[1] == "localhost")
and (key2[2].decode("utf8").lower() == key)
):
# Add the unconverted database's PATH values to the CONVERTED database's configuration!
TransanaGlobal.configData.pathsByDB[
("", "localhost", key.encode("utf8"))
] = {
"visualizationPath": TransanaGlobal.configData.pathsByDB2[key2][
"visualizationPath"
],
"videoPath": TransanaGlobal.configData.pathsByDB2[key2]["videoPath"],
}
# ... and we can stop looking
break
# Save the altered configuration data
TransanaGlobal.configData.SaveConfiguration()
# The Computer Lab version sometimes throws a KeyError
except exceptions.KeyError:
# If this comes up, we can ignore it.
pass
# Delete the Import File Information
os.remove(fs)
if DEBUG:
print "Done importing Files"
# We can only continue if we initialized the database OR are running MU.
if connectionEstablished:
# If a new database login fails three times, we need to close the program.
# Initialize a counter to track that.
logonCount = 1
# Flag if Logon succeeds
loggedOn = False
# Keep trying for three tries or until successful
while (logonCount <= 3) and (not loggedOn):
logonCount += 1
# Confirm the existence of the DB Tables, creating them if needed.
# This method also calls the Username and Password Dialog if needed.
# NOTE: The Menu Window must be created first to server as a parent for the Username and Password Dialog
# called up by DBInterface.
if DBInterface.establish_db_exists():
if DEBUG:
print "Creating Data Window",
# Create the Data Window
# Data Window creation causes Username and Password Dialog to be displayed,
# so it should be created before the Video Window
self.dataWindow = DataWindow.DataWindow(TransanaGlobal.menuWindow)
if DEBUG:
print self.dataWindow.GetSize()
print "Creating Video Window",
# Create the Video Window
self.videoWindow = VideoWindow.VideoWindow(TransanaGlobal.menuWindow)
# Create the Transcript Window. If on the Mac, include the Close button.
if DEBUG:
print self.videoWindow.GetSize()
print "Creating Transcript Window",
self.transcriptWindow = TranscriptionUI.TranscriptionUI(
TransanaGlobal.menuWindow, includeClose=("wxMac" in wx.PlatformInfo)
)
if DEBUG:
print self.transcriptWindow.dlg.GetSize()
print "Creating Visualization Window",
# Create the Visualization Window
self.visualizationWindow = VisualizationWindow.VisualizationWindow(TransanaGlobal.menuWindow)
if DEBUG:
print self.visualizationWindow.GetSize()
print "Creating Control Object"
# Create the Control Object and register all objects to be controlled with it
self.ControlObject = ControlObject()
self.ControlObject.Register(
Menu=TransanaGlobal.menuWindow,
Video=self.videoWindow,
Transcript=self.transcriptWindow,
Data=self.dataWindow,
Visualization=self.visualizationWindow,
)
# Set the active transcript
self.ControlObject.activeTranscript = 0
# Register the ControlObject with all other objects to be controlled
TransanaGlobal.menuWindow.Register(ControlObject=self.ControlObject)
self.dataWindow.Register(ControlObject=self.ControlObject)
self.videoWindow.Register(ControlObject=self.ControlObject)
self.transcriptWindow.Register(ControlObject=self.ControlObject)
self.visualizationWindow.Register(ControlObject=self.ControlObject)
# Set the Application Top Window to the Menu Window (wxPython)
self.SetTopWindow(TransanaGlobal.menuWindow)
TransanaGlobal.resizingAll = True
if DEBUG:
print
print "Before Showing Windows:"
print " menu:\t\t", TransanaGlobal.menuWindow.GetRect()
print " visual:\t", self.visualizationWindow.GetRect()
print " video:\t", self.videoWindow.GetRect()
print " trans:\t", self.transcriptWindow.dlg.GetRect()
print " data:\t\t", self.dataWindow.GetRect()
print
print "Heights:", self.transcriptWindow.dlg.GetRect()[1] + self.transcriptWindow.dlg.GetRect()[
3
], self.dataWindow.GetRect()[1] + self.dataWindow.GetRect()[3]
print
if (
self.transcriptWindow.dlg.GetRect()[1] + self.transcriptWindow.dlg.GetRect()[3]
> self.dataWindow.GetRect()[1] + self.dataWindow.GetRect()[3]
):
self.dataWindow.SetRect(
(
self.dataWindow.GetRect()[0],
self.dataWindow.GetRect()[1],
self.dataWindow.GetRect()[2],
self.dataWindow.GetRect()[3]
+ (
self.transcriptWindow.dlg.GetRect()[1]
+ self.transcriptWindow.dlg.GetRect()[3]
- (self.dataWindow.GetRect()[1] + self.dataWindow.GetRect()[3])
),
)
)
print "DataWindow Height Adjusted!"
print " data:\t\t", self.dataWindow.GetRect()
print
# Show all Windows.
TransanaGlobal.menuWindow.Show(True)
if DEBUG:
print "Showing Windows:"
print " menu:", TransanaGlobal.menuWindow.GetRect()
self.visualizationWindow.Show()
if DEBUG:
print " visualization:", self.visualizationWindow.GetRect()
self.videoWindow.Show()
if DEBUG:
print " video:", self.videoWindow.GetRect(), self.transcriptWindow.dlg.GetRect()
self.transcriptWindow.Show()
if DEBUG:
print " transcript:", self.transcriptWindow.dlg.GetRect(), self.dataWindow.GetRect()
self.dataWindow.Show()
if DEBUG:
print " data:", self.dataWindow.GetRect(), self.visualizationWindow.GetRect()
# Get the size and position of the Visualization Window
(x, y, w, h) = self.visualizationWindow.GetRect()
if DEBUG:
print
print "Call 3", "Visualization", w + x
# Adjust the positions of all other windows to match the Visualization Window's initial position
self.ControlObject.UpdateWindowPositions("Visualization", w + x, YUpper=h + y)
TransanaGlobal.resizingAll = False
loggedOn = True
# If logon fails, inform user and offer to try again twice.
elif logonCount <= 3:
# Check to see if we have an SSL failure caused by insufficient data
if (
(not TransanaConstants.singleUserVersion)
and TransanaGlobal.configData.ssl
and (
TransanaGlobal.configData.sslClientCert == ""
or TransanaGlobal.configData.sslClientKey == ""
)
):
# If so, inform the user
prompt = _(
"The information on the SSL tab is required to establish an SSL connection to the database.\nWould you like to try again?"
)
# Otherwise ...
else:
# ... give a generic message about logon failure.
prompt = _("Transana was unable to connect to the database.\nWould you like to try again?")
dlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow, prompt, _("Transana Database Connection"))
# If the user does not want to try again, set the counter to 4, which will cause the program to exit
if dlg.LocalShowModal() == wx.ID_NO:
logonCount = 4
# Clean up the Dialog Box
dlg.Destroy()
# If we successfully logged in ...
if loggedOn:
# ... save the configuration data that got us in
TransanaGlobal.configData.SaveConfiguration()
# if we're running the multi-user version of Transana and successfully connected to a database ...
if not TransanaConstants.singleUserVersion and loggedOn:
if DEBUG:
print "Need to connect to MessageServer"
# ... connect to the Message Server Here
TransanaGlobal.socketConnection = ChatWindow.ConnectToMessageServer()
# If the connections fails ...
if TransanaGlobal.socketConnection == None:
# ... signal that Transana should NOT start up!
loggedOn = False
else:
# If Transana MU sits idle too long (30 - 60 minutes), people would sometimes get a
# "Connection to Database Lost" error message even though MySQL was set to maintain the
# connection for 8 hours. To try to address this, we will set up a Timer that will run
# a simple query every 10 minutes to maintain the connection to the database.
# Create the Connection Timer
TransanaGlobal.connectionTimer = wx.Timer(self)
# Bind the timer to its event
self.Bind(wx.EVT_TIMER, self.OnTimer)
# Tell the timer to fire every 10 minutes.
# NOTE: If changing this value, it also needs to be changed in the ControlObjectClass.GetNewDatabase() method.
TransanaGlobal.connectionTimer.Start(600000)
if DEBUG:
print "MessageServer connected!"
# Check if the Database and Message Server are both using SSL and select the appropriate graphic
self.dataWindow.UpdateSSLStatus(TransanaGlobal.configData.ssl and TransanaGlobal.chatIsSSL)
# if this is the first time this user profile has used Transana ...
if firstStartup and loggedOn:
# ... create a prompt about looking at the Tutorial
prompt = _(
"If this is your first time using Transana, the Transana Tutorial can help you learn how to use the program."
)
prompt += "\n\n" + _("Would you like to see the Transana Tutorial now?")
# Display the Tutorial prompt in a Yes / No dialog
tmpDlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow, prompt)
# If the user says Yes ...
if tmpDlg.LocalShowModal() == wx.ID_YES:
# ... start the Tutorial
self.ControlObject.Help("Welcome to the Transana Tutorial")
if DEBUG:
print
print "Final Windows:"
print " menu:\t\t", TransanaGlobal.menuWindow.GetRect()
print " visual:\t", self.visualizationWindow.GetRect()
print " video:\t", self.videoWindow.GetRect()
print " trans:\t", self.transcriptWindow.dlg.GetRect()
print " data:\t\t", self.dataWindow.GetRect()
print
else:
loggedOn = False
dlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow, msg, _("Transana Database Connection"))
if dlg.LocalShowModal() == wx.ID_YES:
TransanaGlobal.configData.databaseDir = os.path.join(
TransanaGlobal.configData.GetDefaultProfilePath(), "databases"
)
TransanaGlobal.configData.SaveConfiguration()
# Clean up the Dialog Box
dlg.Destroy()
return loggedOn
def __init__(self,
parent,
msg,
header=_("Transana Confirmation"),
noDefault=False,
useOkCancel=False,
yesToAll=False,
includeEncoding=False):
""" QuestionDialog Parameters:
parent Parent Window
msg Message to display
header Dialog box header, "Transana Confirmation" by default
noDefault Set the No or Cancel button as the default, instead of Yes or OK
useOkCancel Use OK / Cancel as the button labels rather than Yes / No
yesToAll Include the "Yes to All" option
includeEncoding Include Encoding selection for upgrading the single-user Windows database for 2.50 """
# This should be easy, right? Just use the OS MessageDialog like so:
# wx.MessageDialog.__init__(self, parent, msg, _("Transana Information"), \
# wx.OK | wx.CENTRE | wx.ICON_INFORMATION)
# That's all there is to it, right?
#
# Yeah, right. Unfortunately, on Windows, the MessageDialog isn't TRULY modal. It's modal to the parent window
# it's called from, but you can still select one of the other Transana Windows and do stuff. This message
# can even get hidden behind other windows, and cause all kinds of problems. According to Robin Dunn,
# writing my own class to do this is the only solution.
# Set the default result to indicate failure
self.result = -1
# Remember the noDefault setting
self.noDefault = noDefault
# Remember if Encoding is included
self.includeEncoding = includeEncoding
# Define the default Window style
dlgStyle = wx.CAPTION | wx.CLOSE_BOX | wx.STAY_ON_TOP
# Create a small dialog box
wx.Dialog.__init__(self,
parent,
-1,
header,
size=(350, 150),
style=dlgStyle)
# Create a main vertical sizer
box = wx.BoxSizer(wx.VERTICAL)
# Create a horizontal sizer for the first row
box2 = wx.BoxSizer(wx.HORIZONTAL)
# Create a horizontal sizer for the buttons
boxButtons = wx.BoxSizer(wx.HORIZONTAL)
# Create an empty bitmap for the question mark graphic
bitmap = wx.EmptyBitmap(32, 32)
# Create a bitmap screen object for the graphic
graphic = wx.StaticBitmap(self, -1,
TransanaImages.ArtProv_QUESTION.GetBitmap())
# Add the graphic to the first row horizontal sizer
box2.Add(graphic, 0, wx.EXPAND | wx.ALIGN_CENTER | wx.ALL, 10)
# Create a text screen object for the dialog text
message = wx.StaticText(self, -1, msg)
# Add it to the first row sizer
box2.Add(
message, 0,
wx.EXPAND | wx.ALIGN_CENTER | wx.ALIGN_CENTER_VERTICAL | wx.ALL,
10)
# Add the first row to the main sizer
box.Add(box2, 0, wx.EXPAND)
# Determine the appropriate text and ID values for the buttons.
# if useOkCancel is True ...
if useOkCancel:
# ... set the buttons to OK and Cancel
btnYesText = _("OK")
btnYesID = wx.ID_OK
btnNoText = _("Cancel")
btnNoID = wx.ID_CANCEL
# If useOkCancel is False (the default) ...
else:
# ... set the buttons to Yes and No
btnYesText = _("&Yes")
btnYesID = wx.ID_YES
btnNoText = _("&No")
btnNoID = wx.ID_NO
# Create the first button, which is Yes or OK
btnYes = wx.Button(self, btnYesID, btnYesText)
# Bind the button event to its method
btnYes.Bind(wx.EVT_BUTTON, self.OnButton)
# If the "Yes to All" option is enabled
if yesToAll:
# ... create a YesToAll ID
self.YESTOALLID = wx.NewId()
# Create a Yes To All button
self.btnYesToAll = wx.Button(self, self.YESTOALLID,
_("Yes to All"))
# Bind the button handler for the Yes To All button
self.btnYesToAll.Bind(wx.EVT_BUTTON, self.OnButton)
# Create the second button, which is No or Cancel
self.btnNo = wx.Button(self, btnNoID, btnNoText)
# Bind the button event to its method
self.btnNo.Bind(wx.EVT_BUTTON, self.OnButton)
# Add an expandable spacer to the button sizer
boxButtons.Add((20, 1), 1)
# If we're on the Mac, we want No/Cancel then Yes/OK
if "__WXMAC__" in wx.PlatformInfo:
# Add No first
boxButtons.Add(self.btnNo, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# If the "Yes to All" option is enabled
if yesToAll:
# Add No first
boxButtons.Add(self.btnYesToAll, 0,
wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# Then add Yes
boxButtons.Add(btnYes, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# If we're not on the Mac, we want Yes/OK then No/Cancel
else:
# Add Yes first
boxButtons.Add(btnYes, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# If the "Yes to All" option is enabled
if yesToAll:
# Add No first
boxButtons.Add(self.btnYesToAll, 0,
wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# Then add No
boxButtons.Add(self.btnNo, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a final expandable spacer
boxButtons.Add((20, 1), 1)
# Add the button bar to the main sizer
box.Add(boxButtons, 0, wx.ALIGN_CENTER | wx.EXPAND)
# If we're supposed to include the Encoding prompt ...
if includeEncoding:
# Create a horizontal sizer for the first row
box3 = wx.BoxSizer(wx.HORIZONTAL)
# Define the options for the Encoding choice box
choices = [
'',
_('Most languages from single-user Transana 2.1 - 2.42 on Windows'
),
_('Chinese from single-user Transana 2.1 - 2.42 on Windows'),
_('Russian from single-user Transana 2.1 - 2.42 on Windows'),
_('Eastern European data from single-user Transana 2.1 - 2.42 on Windows'
),
_('Greek data from single-user Transana 2.1 - 2.42 on Windows'
),
_('Japanese data from single-user Transana 2.1 - 2.42 on Windows'
),
_("All languages from OS X or MU database files")
]
# Use a dictionary to define the encodings that go with each of the Encoding options
self.encodingOptions = {
'':
None,
_('Most languages from single-user Transana 2.1 - 2.42 on Windows'):
'latin1',
_('Chinese from single-user Transana 2.1 - 2.42 on Windows'):
'gbk',
_('Russian from single-user Transana 2.1 - 2.42 on Windows'):
'koi8_r',
_('Eastern European data from single-user Transana 2.1 - 2.42 on Windows'):
'iso8859_2',
_('Greek data from single-user Transana 2.1 - 2.42 on Windows'):
'iso8859_7',
_('Japanese data from single-user Transana 2.1 - 2.42 on Windows'):
'cp932',
_("All languages from OS X or MU database files"):
'utf8'
}
# Create a Choice Box where the user can select an import encoding, based on information about how the
# Transana-XML file in question was created. This adds it to the Vertical Sizer created above.
chLbl = wx.StaticText(self, -1, _('Language Option used:'))
box3.Add(chLbl, 0, wx.LEFT | wx.TOP | wx.BOTTOM, 10)
self.chImportEncoding = wx.Choice(self, -1, choices=choices)
self.chImportEncoding.SetSelection(0)
box3.Add(
self.chImportEncoding, 1, wx.EXPAND | wx.ALIGN_CENTER
| wx.ALIGN_CENTER_VERTICAL | wx.ALL, 10)
box.Add(box3, 0, wx.EXPAND)
# Turn AutoLayout On
self.SetAutoLayout(True)
# Set the form's main sizer
self.SetSizer(box)
# Fit the form
self.Fit()
# Lay the form out
self.Layout()
# Center the form on screen
# self.CentreOnScreen()
# That's not working. Let's try this ...
TransanaGlobal.CenterOnPrimary(self)
def __init__(self, parent, id, title, obj, keywords):
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(
self,
parent,
id,
title,
size=TransanaGlobal.configData.keywordListEditSize,
style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers=True,
HelpContext='Edit Keywords')
# Remember the parent Window
self.parent = parent
self.obj = obj
# if Keywords that server as Keyword Examples are removed, we will need to remember them.
# Then, when OK is pressed, the Keyword Example references in the Database Tree can be removed.
# We can't remove them immediately in case the whole Clip Properties Edit process is cancelled.
self.keywordExamplesToDelete = []
# COPY the keyword list, rather than just pointing to it, so that the list on this form will
# be independent of the original list. That way, pressing CANCEL does not cause the list to
# be changed anyway, though it means that if OK is pressed, you must copy the list to update
# it in the calling routine.
self.keywords = []
for kws in keywords:
self.keywords.append(kws)
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Keyword Group [label]
txt = wx.StaticText(self.panel, -1, _("Keyword Group"))
v1.Add(txt, 0, wx.BOTTOM, 3)
# Keyword Group layout [list box]
# Create an empty Keyword Group List for now. We'll populate it later (for layout reasons)
self.kw_groups = []
self.kw_group_lb = wx.ListBox(self.panel, 101, wx.DefaultPosition,
wx.DefaultSize, self.kw_groups)
v1.Add(self.kw_group_lb, 1, wx.EXPAND)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
self.kw_list = []
wx.EVT_LISTBOX(self, 101, self.OnGroupSelect)
# Add a horizontal spacer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Keyword [label]
txt = wx.StaticText(self.panel, -1, _("Keyword"))
v2.Add(txt, 0, wx.BOTTOM, 3)
# Keyword [list box]
self.kw_lb = wx.ListBox(self.panel,
-1,
wx.DefaultPosition,
wx.DefaultSize,
self.kw_list,
style=wx.LB_EXTENDED)
v2.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX_DCLICK(self, self.kw_lb.GetId(), self.OnAddKW)
# Add the element to the sizer
r1Sizer.Add(v2, 1, wx.EXPAND)
# Add a horizontal spacer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Keyword transfer buttons
add_kw = wx.Button(self.panel, wx.ID_FILE2, ">>", wx.DefaultPosition)
v3.Add(add_kw, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self, wx.ID_FILE2, self.OnAddKW)
rm_kw = wx.Button(self.panel, wx.ID_FILE3, "<<", wx.DefaultPosition)
v3.Add(rm_kw, 0, wx.EXPAND | wx.TOP, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnRemoveKW)
kwm = wx.BitmapButton(self.panel, wx.ID_FILE4,
TransanaImages.KWManage.GetBitmap())
v3.Add(kwm, 0, wx.EXPAND | wx.TOP, 10)
# Add a spacer to increase the height of the Keywords section
v3.Add((0, 60))
kwm.SetToolTipString(_("Keyword Management"))
wx.EVT_BUTTON(self, wx.ID_FILE4, self.OnKWManage)
# Add the element to the sizer
r1Sizer.Add(v3, 0)
# Add a horizontal spacer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Keywords [label]
txt = wx.StaticText(self.panel, -1, _("Keywords"))
v4.Add(txt, 0, wx.BOTTOM, 3)
# Keywords [list box]
# Create an empty ListBox
self.ekw_lb = wx.ListBox(self.panel,
-1,
wx.DefaultPosition,
wx.DefaultSize,
style=wx.LB_EXTENDED)
v4.Add(self.ekw_lb, 1, wx.EXPAND)
self.ekw_lb.Bind(wx.EVT_KEY_DOWN, self.OnKeywordKeyDown)
# Add the element to the sizer
r1Sizer.Add(v4, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 1, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(600, width), max(385, height)))
# Define the minimum size for this dialog as the current size
self.SetSizeHints(max(600, width), max(385, height))
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# We need to set some minimum sizes so the sizers will work right
self.kw_group_lb.SetSizeHints(minW=50, minH=20)
self.kw_lb.SetSizeHints(minW=50, minH=20)
self.ekw_lb.SetSizeHints(minW=50, minH=20)
# We need to capture the OK and Cancel button clicks locally. We'll use FindWindowByID to locate the correct widgets.
self.Bind(wx.EVT_BUTTON, self.OnOK, self.FindWindowById(wx.ID_OK))
self.Bind(wx.EVT_BUTTON, self.OnCancel,
self.FindWindowById(wx.ID_CANCEL))
# We populate the Keyword Groups, Keywords, and Clip Keywords lists AFTER we determine the Form Size.
# Long Keywords in the list were making the form too big!
# Obtain the list of Keyword Groups
self.kw_groups = DBInterface.list_of_keyword_groups()
for keywordGroup in self.kw_groups:
self.kw_group_lb.Append(keywordGroup)
if self.kw_group_lb.GetCount() > 0:
self.kw_group_lb.EnsureVisible(0)
# Get the Parent Object, so we can know the Default Keyword Group
if isinstance(self.obj, Episode.Episode):
objParent = Library.Library(self.obj.series_num)
elif isinstance(self.obj, Document.Document):
objParent = Library.Library(self.obj.library_num)
elif isinstance(self.obj, Clip.Clip) or isinstance(
self.obj, Snapshot.Snapshot) or isinstance(
self.obj, Quote.Quote):
objParent = Collection.Collection(self.obj.collection_num)
if len(self.kw_groups) > 0:
# Set the Keyword Group to the Default keyword Group
if self.kw_group_lb.FindString(
objParent.keyword_group) != wx.NOT_FOUND:
self.kw_group_lb.SetStringSelection(objParent.keyword_group)
else:
self.kw_group_lb.SetSelection(0)
# Obtain the list of Keywords for the intial Keyword Group
self.kw_list = DBInterface.list_of_keywords_by_group(
self.kw_group_lb.GetStringSelection())
else:
self.kw_list = []
for keyword in self.kw_list:
self.kw_lb.Append(keyword)
if self.kw_lb.GetCount() > 0:
self.kw_lb.EnsureVisible(0)
# Populate the ListBox
for clipKeyword in self.keywords:
self.ekw_lb.Append(clipKeyword.keywordPair)
if self.ekw_lb.GetCount() > 0:
self.ekw_lb.EnsureVisible(0)
self.kw_group_lb.SetFocus()
def __init__(self, parent, kw_groups):
# ALSO SEE Keyword._set_keywordGroup(). The same errors are caught there.
# Let's get a copy of kw_groups that's all upper case
self.kw_groups_upper = []
for kwg in kw_groups:
self.kw_groups_upper.append(kwg.upper())
# Define the default Window style
dlgStyle = wx.CAPTION | wx.CLOSE_BOX | wx.STAY_ON_TOP | wx.DIALOG_NO_PARENT
# Create a small dialog box
wx.Dialog.__init__(self,
parent,
-1,
_("Add Keyword Group"),
size=(350, 145),
style=dlgStyle)
# Create a main vertical sizer
box = wx.BoxSizer(wx.VERTICAL)
# Create a horizontal sizer for the buttons
boxButtons = wx.BoxSizer(wx.HORIZONTAL)
# Create a text screen object for the dialog text
message = wx.StaticText(self, -1, _("New Keyword Group:"))
# Add the first row to the main sizer
box.Add(message, 0, wx.EXPAND | wx.ALL, 10)
# Create a TextCtrl for the Keyword Group name
self.kwGroup = wx.TextCtrl(self, -1, "")
box.Add(self.kwGroup, 1, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM,
10)
# Do error-checking in the EVT_TEXT event
self.kwGroup.Bind(wx.EVT_TEXT, self.OnText)
# Create the first button, which is OK
btnOK = wx.Button(self, wx.ID_OK, _("OK"))
# Set as the Default to handle ENTER keypress
btnOK.SetDefault()
# Bind the button event to its method
btnOK.Bind(wx.EVT_BUTTON, self.OnButton)
# Create the second button, which is Cancel
btnCancel = wx.Button(self, wx.ID_CANCEL, _("Cancel"))
# Add an expandable spacer to the button sizer
boxButtons.Add((20, 1), 1)
# If we're on the Mac, we want Cancel then OK
if "__WXMAC__" in wx.PlatformInfo:
# Add No first
boxButtons.Add(btnCancel, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# Then add Yes
boxButtons.Add(btnOK, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# If we're not on the Mac, we want OK then Cancel
else:
# Add Yes first
boxButtons.Add(btnOK, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a spacer
boxButtons.Add((20, 1))
# Then add No
boxButtons.Add(btnCancel, 0, wx.ALIGN_CENTER | wx.BOTTOM, 10)
# Add a final expandable spacer
boxButtons.Add((20, 1), 1)
# Add the button bar to the main sizer
box.Add(boxButtons, 0, wx.ALIGN_RIGHT | wx.EXPAND)
# Turn AutoLayout On
self.SetAutoLayout(True)
# Set the form's main sizer
self.SetSizer(box)
# Fit the form
self.Fit()
# Lay the form out
self.Layout()
# Center the form on screen
# self.CentreOnScreen()
# That's not working. Let's try this ...
TransanaGlobal.CenterOnPrimary(self)
def __init__(self,
parent,
id,
libraryNum=0,
documentNum=0,
episodeNum=0,
collectionNum=0):
# Remember the Library, Document, Episode or Collection that triggered creation of this report
self.libraryNum = libraryNum
self.documentNum = documentNum
self.episodeNum = episodeNum
self.collectionNum = collectionNum
# Create a form to get the name of the file to receive the data
# Define the form title
title = _("Transana Analytic Data Export")
# Create the form itself
Dialogs.GenForm.__init__(self,
parent,
id,
title, (550, 150),
style=wx.DEFAULT_DIALOG_STYLE
| wx.RESIZE_BORDER,
useSizers=True,
HelpContext='Analytic Data Export')
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Header Message
prompt = _('Please create a Transana Analytic Data File for export.')
exportText = wx.StaticText(self.panel, -1, prompt)
# Add the export message to the dialog box
r1Sizer.Add(exportText, 0)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Export Filename
self.exportFile = self.new_edit_box(_("Export Filename"), v1, '')
self.exportFile.SetDropTarget(EditBoxFileDropTarget(self.exportFile))
# Add the element sizer to the row sizer
r2Sizer.Add(v1, 1, wx.EXPAND)
# Add a spacer to the row sizer
r2Sizer.Add((10, 0))
# Browse button
browse = wx.Button(self.panel, wx.ID_FILE1, _("Browse"),
wx.DefaultPosition)
wx.EVT_BUTTON(self, wx.ID_FILE1, self.OnBrowse)
# Add the element to the row sizer
r2Sizer.Add(browse, 0, wx.ALIGN_BOTTOM)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
r2Sizer.Add((2, 0))
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(550, width), max(100, height)))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(550, width), max(100, height), -1,
max(100, height))
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# Set focus to the Export File Name field
self.exportFile.SetFocus()
def __init__(self, parent, id, title, coredata_object):
""" Initialize the Core Data Properties form """
# Set the Size of the Form
self.width = 550
self.height = 510
# Create the Base Form, based on GenForm in the Transana Dialogs module
Dialogs.GenForm.__init__(self, parent, id, title, size=(self.width, self.height), style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext='Core Data Properties')
# Preserve the initial Core Data Object sent in from the calling routine
self.obj = coredata_object
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Media File Name
# NOTE: The otherwise unused Comment Field is used to contain the full Media File Name.
media_filename_edit = self.new_edit_box(_("Media File Name"), v1, self.obj.comment)
# Add the element to the row sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Media File Name Field is not editable
media_filename_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Title
title_edit = self.new_edit_box(_("Title"), v2, self.obj.title, maxLen=255)
# Add the element to the row sizer
r2Sizer.Add(v2, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r3Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Creator
creator_edit = self.new_edit_box(_("Creator"), v3, self.obj.creator, maxLen=255)
# Add the element to the row sizer
r3Sizer.Add(v3, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r3Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Subject
subject_edit = self.new_edit_box(_("Subject"), v4, self.obj.subject, maxLen=255)
# Add the element to the row sizer
r3Sizer.Add(v4, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r3Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r4Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Description
self.description_edit = self.new_edit_box(_("Description"), v5, self.obj.description, style=wx.TE_MULTILINE, maxLen=255)
# Add the element to the row sizer
r4Sizer.Add(v5, 1, wx.EXPAND)
# Add a spacer to enforce the height of the Description item
r4Sizer.Add((0, 80))
# Add the row sizer to the main vertical sizer
mainSizer.Add(r4Sizer, 5, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Publisher
publisher_edit = self.new_edit_box(_("Publisher"), v6, self.obj.publisher, maxLen=255)
# Add the element to the row sizer
r5Sizer.Add(v6, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Contributor
contributor_edit = self.new_edit_box(_("Contributor"), v7, self.obj.contributor, maxLen=255)
# Add the element to the row sizer
r5Sizer.Add(v7, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r6Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Dialogs.GenForm does not provide a Masked text control, so the Date
# Field is handled differently than other fields.
# Date [label]
date_lbl = wx.StaticText(self.panel, -1, _("Date (MM/DD/YYYY)"))
# Add the element to the vertical sizer
v8.Add(date_lbl, 0, wx.BOTTOM, 3)
# Date layout
# Use the Masked Text Control (Requires wxPython 2.4.2.4 or later)
# TODO: Make Date autoformat localizable
self.date_edit = wx.lib.masked.TextCtrl(self.panel, -1, '', autoformat='USDATEMMDDYYYY/')
# Add the element to the vertical sizer
v8.Add(self.date_edit, 1, wx.EXPAND)
# If a Date is know, load it into the control
if (self.obj.dc_date != '') and (self.obj.dc_date != '01/01/0'):
self.date_edit.SetValue(self.obj.dc_date)
# Add the element to the row sizer
r6Sizer.Add(v8, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r6Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Type
# Define legal options for the Combo Box
options = ['', _('Image'), _('Sound')]
self.type_combo = self.new_combo_box(_("Media Type"), v9, options, self.obj.dc_type)
# Add the element to the row sizer
r6Sizer.Add(v9, 1, wx.EXPAND)
# Define a Combo Box Event. When different Types are selected, different Format options should be displayed.
wx.EVT_COMBOBOX(self, self.type_combo.GetId(), self.OnTypeChoice)
# Add a horizontal spacer to the row sizer
r6Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v10 = wx.BoxSizer(wx.VERTICAL)
# Format
# The Format Combo Box has different options depending on the value of Type
if self.obj.dc_type == unicode(_('Image'), 'utf8'):
options = imageOptions
elif self.obj.dc_type == unicode(_('Sound'), 'utf8'):
options = soundOptions
else:
options = allOptions
self.format_combo = self.new_combo_box(_("Format"), v10, options, self.obj.format)
# Add the element to the row sizer
r6Sizer.Add(v10, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r6Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r7Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v11 = wx.BoxSizer(wx.VERTICAL)
# Identifier
identifier_edit = self.new_edit_box(_("Identifier"), v11, self.obj.id)
# Add the element to the row sizer
r7Sizer.Add(v11, 1, wx.EXPAND)
# Identifier is not editable
identifier_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v12 = wx.BoxSizer(wx.VERTICAL)
# Source
source_edit = self.new_edit_box(_("Source"), v12, self.obj.source, maxLen=255)
# Add the element to the row sizer
r7Sizer.Add(v12, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r7Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r8Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v13 = wx.BoxSizer(wx.VERTICAL)
# Language
language_edit = self.new_edit_box(_("Language"), v13, self.obj.language, maxLen=25)
# Add the element to the row sizer
r8Sizer.Add(v13, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r8Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v14 = wx.BoxSizer(wx.VERTICAL)
# Relation
relation_edit = self.new_edit_box(_("Relation"), v14, self.obj.relation, maxLen=255)
# Add the element to the row sizer
r8Sizer.Add(v14, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r8Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the first row
r9Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v15 = wx.BoxSizer(wx.VERTICAL)
# Coverage
coverage_edit = self.new_edit_box(_("Coverage"), v15, self.obj.coverage, maxLen=255)
# Add the element to the row sizer
r9Sizer.Add(v15, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r9Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v16 = wx.BoxSizer(wx.VERTICAL)
# Rights
rights_edit = self.new_edit_box(_("Rights"), v16, self.obj.rights, maxLen=255)
# Add the element to the row sizer
r9Sizer.Add(v16, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r9Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(self.width, width), height))
# Define the minimum size for this dialog as the current size
self.SetSizeHints(max(self.width, width), height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# Set focus to Title
title_edit.SetFocus()
def OnInit(self):
""" Initialize the application """
# If we have a Workshop Version, see if the version is still valid, report to the user and exit if not.
# NOTE: This code just provides a user message and clean exit. Transana will still be disabled if this
# code is removed. (This code is user-accessible on OS X!)
if TransanaConstants.workshopVersion:
import datetime
t1 = TransanaConstants.startdate
t2 = TransanaConstants.expirationdate
t3 = time.localtime()
t4 = datetime.datetime(t3[0], t3[1], t3[2], t3[3], t3[4])
if (t1 > t4) or (t2 < t4):
dlg = Dialogs.ErrorDialog(
None, "This copy of Transana is no longer valid.")
dlg.ShowModal()
dlg.Destroy
return False
# In wxPython, you used to be able to initialize the ConfigData object in the TransanaGlobal module, even though the
# wx.App() hadn't been initialized yet. Moving from wxPython 2.8.1 to wxPython 2.8.9, this stopped being true
# at least on the Mac. Therefore, we moved creation of the ConfigData object to here in the code.
# However, there are MANY references to ConfigData being in the TransanaGlobal module, so that's where we'll keep it.
TransanaGlobal.configData = ConfigData.ConfigData()
# If we are running from a BUILD instead of source code ...
if hasattr(sys, "frozen"): # or ('wxMac' in wx.PlatformInfo):
# See if the Default Profile Path exists. If not ...
if not os.path.exists(
TransanaGlobal.configData.GetDefaultProfilePath()):
# ... then create it (recursively).
os.makedirs(TransanaGlobal.configData.GetDefaultProfilePath())
# Build the path for the error log
path = os.path.join(
TransanaGlobal.configData.GetDefaultProfilePath(),
'Transana_Error.log')
# redirect output to the error log
self.RedirectStdio(filename=path)
# Put a startup indicator in the Error Log
print "Transana started:", time.asctime()
# If no Language is defined ...
if TransanaGlobal.configData.language == '':
# ... then we know this is the first startup for this user profile. Remember that!
firstStartup = True
# If language is known ...
else:
# ... then it's NOT first time startup.
firstStartup = False
# Now that we've loaded the Configuration Data, we can see if we need to alter the default encoding
# If we're on Windows, single-user, using Russian, use KOI8r encoding instead of Latin-1,
# Chinese uses big5, Japanese uses cp932, and Korean uses cp949
## if ('wxMSW' in wx.PlatformInfo) and (TransanaConstants.singleUserVersion):
## if (TransanaGlobal.configData.language == 'ru'):
## TransanaGlobal.encoding = 'koi8_r'
## elif (TransanaGlobal.configData.language == 'zh'):
## TransanaGlobal.encoding = TransanaConstants.chineseEncoding
## elif (TransanaGlobal.configData.language == 'el'):
## TransanaGlobal.encoding = 'iso8859_7'
## elif (TransanaGlobal.configData.language == 'ja'):
## TransanaGlobal.encoding = 'cp932'
## elif (TransanaGlobal.configData.language == 'ko'):
## TransanaGlobal.encoding = 'cp949'
# Use UTF-8 Encoding throughout Transana to allow maximum internationalization
if ('unicode' in wx.PlatformInfo) and (wx.VERSION_STRING >= '2.6'):
wx.SetDefaultPyEncoding('utf_8')
# On OS/X, change the working directory to the directory the script is
# running from, this is necessary for running from a bundle.
if "__WXMAC__" in wx.PlatformInfo:
if TransanaGlobal.programDir != '':
os.chdir(TransanaGlobal.programDir)
import MenuWindow # import Menu Window Object
sys.excepthook = transana_excepthook # Define the system exception handler
# First, determine the program name that should be displayed, single or multi-user
if TransanaConstants.singleUserVersion:
if TransanaConstants.proVersion:
programTitle = _("Transana - Professional")
else:
programTitle = _("Transana - Standard")
else:
programTitle = _("Transana - Multiuser")
# Ammend the program title for the Demo version if appropriate
if TransanaConstants.demoVersion:
programTitle += _(" - Demonstration")
# Create the Menu Window
TransanaGlobal.menuWindow = MenuWindow.MenuWindow(
None, -1, programTitle)
# Create the global transana graphics colors, once the ConfigData object exists.
TransanaGlobal.transana_graphicsColorList = TransanaGlobal.getColorDefs(
TransanaGlobal.configData.colorConfigFilename)
# Set essential global color manipulation data structures once the ConfigData object exists.
(TransanaGlobal.transana_colorNameList,
TransanaGlobal.transana_colorLookup,
TransanaGlobal.keywordMapColourSet
) = TransanaGlobal.SetColorVariables()
# Add the RTF modules to the Python module search path. This allows
# us to import from a directory other than the standard search paths
# and the current directory/subdirectories.
sys.path.append("rtf")
# Load the Splash Screen graphic
bitmap = TransanaImages.splash.GetBitmap()
# We need to draw the Version Number onto the Splash Screen Graphic.
# First, create a Memory DC
memoryDC = wx.MemoryDC()
# Select the bitmap into the Memory DC
memoryDC.SelectObject(bitmap)
# Build the Version label
if TransanaConstants.singleUserVersion:
if TransanaConstants.labVersion:
versionLbl = _("Computer Lab Version")
elif TransanaConstants.demoVersion:
versionLbl = _("Demonstration Version")
elif TransanaConstants.workshopVersion:
versionLbl = _("Workshop Version")
else:
if TransanaConstants.proVersion:
versionLbl = _("Professional Version")
else:
versionLbl = _("Standard Version")
else:
versionLbl = _("Multi-user Version")
versionLbl += " %s"
# Determine the size of the version text
(verWidth, verHeight) = memoryDC.GetTextExtent(
versionLbl % TransanaConstants.versionNumber)
# Add the Version Number text to the Memory DC (and therefore the bitmap)
memoryDC.DrawText(versionLbl % TransanaConstants.versionNumber,
370 - verWidth, 156)
# Clear the bitmap from the Memory DC, thus freeing it to be displayed!
memoryDC.SelectObject(wx.EmptyBitmap(10, 10))
# If the Splash Screen Graphic exists, display the Splash Screen for 4 seconds.
# If not, raise an exception.
if bitmap:
# Mac requires a different style, as "STAY_ON_TOP" adds a header to the Splash Screen
if "__WXMAC__" in wx.PlatformInfo:
splashStyle = wx.SIMPLE_BORDER
else:
splashStyle = wx.SIMPLE_BORDER | wx.STAY_ON_TOP
# If we have a Right-To-Left language ...
if TransanaGlobal.configData.LayoutDirection == wx.Layout_RightToLeft:
# ... we need to reverse the image direcion
bitmap = bitmap.ConvertToImage().Mirror().ConvertToBitmap()
splashPosition = wx.DefaultPosition
## This doesn't work. I have not been able to put the Splash Screen anywhere but on the Center of
## Monitor 0 (with wx.SPASH_CENTER_ON_SCREEN) or the upper left corner of Monitor 0 (without it). Bummer.
## # Get the Size and Position for the PRIMARY screen
## (x1, y1, w1, h1) = wx.Display(TransanaGlobal.configData.primaryScreen).GetClientArea()
## (x2, y2) = bitmap.GetSize()
##
## splashPosition = (int(float(w1) / 2.0) + x1 - int(float(x2) / 2.0),
## int(float(h1) / 2.0) + y1 - int(float(y2) / 2.0))
##
## print "Splash Screen Position:"
## print TransanaGlobal.configData.primaryScreen
## print x1, y1, w1, h1
## print x2, y2
## print splashPosition
## print
# Create the SplashScreen object
splash = wx.SplashScreen(
bitmap, wx.SPLASH_CENTER_ON_SCREEN | wx.SPLASH_TIMEOUT, 4000,
None, -1, splashPosition, wx.DefaultSize, splashStyle)
else:
raise ImageLoadError, \
_("Unable to load Transana's splash screen image. Installation error?")
wx.Yield()
if DEBUG:
print "Number of Monitors:", wx.Display.GetCount()
for x in range(wx.Display.GetCount()):
print " ", x, wx.Display(x).IsPrimary(), wx.Display(
x).GetGeometry(), wx.Display(x).GetClientArea()
print
import DataWindow # import Data Window Object
import VideoWindow # import Video Window Object
# import Transcript Window Object
if TransanaConstants.USESRTC:
import TranscriptionUI_RTC as TranscriptionUI
else:
import TranscriptionUI
import VisualizationWindow # import Visualization Window Object
import exceptions # import exception handler (Python)
# if we're running the multi-user version of Transana ...
if not TransanaConstants.singleUserVersion:
# ... import the Transana ChatWindow module
import ChatWindow
# Initialize all main application Window Objects
# If we're running the Lab version OR we're on the Mac ...
if TransanaConstants.labVersion or ('wxMac' in wx.PlatformInfo):
# ... then pausing for 4 seconds delays the appearance of the Lab initial configuration dialog
# or the Mac version login / database dialog until the Splash screen closes.
time.sleep(4)
# If we are running the Lab version ...
if TransanaConstants.labVersion:
# ... we want an initial configuration screen. Start by importing Transana's Option Settings dialog
import OptionsSettings
# Initialize all paths to BLANK for the lab version
TransanaGlobal.configData.videoPath = ''
TransanaGlobal.configData.visualizationPath = ''
TransanaGlobal.configData.databaseDir = ''
# Create the config dialog for the Lab initial configuration
options = OptionsSettings.OptionsSettings(
TransanaGlobal.menuWindow, lab=True)
options.Destroy()
wx.Yield()
# If the databaseDir is blank, user pressed CANCEL ...
if (TransanaGlobal.configData.databaseDir == ''):
# ... and we should quit immediately, signalling failure
return False
# initialze a variable indicating database connection to False (assume the worst.)
connectionEstablished = False
# Let's trap the situation where the database folder is not available.
try:
# Start MySQL if using the embedded version
if TransanaConstants.singleUserVersion:
DBInterface.InitializeSingleUserDatabase()
# If we get here, we've been successful! (NOTE that MU merely changes our default from False to True!)
connectionEstablished = True
except:
if DEBUG:
import traceback
print sys.exc_info()[0], sys.exc_info()[1]
traceback.print_exc(file=sys.stdout)
msg = _(
'Transana is unable to access any Database at "%s".\nPlease check to see if this path is available.'
)
if not TransanaConstants.labVersion:
msg += '\n' + _(
'Would you like to restore the default Database path?')
if ('unicode' in wx.PlatformInfo) and isinstance(msg, str):
msg = unicode(msg, 'utf8')
msg = msg % TransanaGlobal.configData.databaseDir
if TransanaConstants.labVersion:
dlg = Dialogs.ErrorDialog(None, msg)
dlg.ShowModal()
dlg.Destroy()
return False
# If we're on the Single-user version for Windows ...
if TransanaConstants.singleUserVersion:
# ... determine the file name for the data conversion information pickle file
fs = os.path.join(TransanaGlobal.configData.databaseDir,
'260_300_Convert.pkl')
# If there is data in mid-conversion ...
if os.path.exists(fs):
# ... get the conversion data from the Pickle File
f = file(fs, 'r')
# exportedDBs is a dictionary containing the Transana-XML file name and the encoding of each DB to be imported
self.exportedDBs = pickle.load(f)
# Close the pickle file
f.close()
# Prompt the user about importing the converted data
prompt = unicode(
_("Transana has detected one or more databases ready for conversion.\nDo you want to convert those databases now?"
), 'utf8')
tmpDlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow,
prompt,
_("Database Conversion"))
result = tmpDlg.LocalShowModal()
tmpDlg.Destroy()
# If the user wants to do the conversion now ...
if result == wx.ID_YES:
# ... import Transana's XML Import code
import XMLImport
# Before we go further, let's make sure none of the conversion files have ALREADY been imported!
# The 2.42 to 2.50 Data Conversion Utility shouldn't allow this, but it doesn't hurt to check.
# Iterate through the conversion data
for key in self.exportedDBs:
# Determine the file path for the converted database
newDBPath = os.path.join(
TransanaGlobal.configData.databaseDir, key + '.db')
# If the converted database ALREADY EXISTS ...
if os.path.exists(newDBPath):
# ... create an error message
prompt = unicode(
_('Database "%s" already exists.\nDatabase "%s" cannot be converted at this time.'
), 'utf8')
# ... display an error message
tmpDlg = Dialogs.ErrorDialog(
None, prompt % (key, key))
tmpDlg.ShowModal()
tmpDlg.Destroy()
# If the converted database does NOT exist ...
else:
if 'wxMac' in wx.PlatformInfo:
prompt = _(
'Converting "%s"\nThis process may take a long time, depending on how much data this database contains.\nWe cannot provide progress feedback on OS X. Please be patient.'
)
progWarn = Dialogs.PopupDialog(
None, _("Converting Databases"),
prompt % key)
# Create the Import Database, passing the database name so the user won't be prompted for one.
DBInterface.establish_db_exists(dbToOpen=key,
usePrompt=False)
# Import the database.
# First, create an Import Database dialog, but don't SHOW it.
temp = XMLImport.XMLImport(
TransanaGlobal.menuWindow,
-1,
_('Transana XML Import'),
importData=self.exportedDBs[key])
# ... Import the requested data!
temp.Import()
# Close the Import Database dialog
temp.Close()
if 'wxMac' in wx.PlatformInfo:
progWarn.Destroy()
progWarn = None
# Close the database that was just imported
DBInterface.close_db()
# Clear the current database name from the Config data
TransanaGlobal.configData.database = ''
# If we do NOT have a localhost key (which Lab version does not!) ...
if not TransanaGlobal.configData.databaseList.has_key(
'localhost'):
# ... let's create one so we can pass the converted database name!
TransanaGlobal.configData.databaseList[
'localhost'] = {}
TransanaGlobal.configData.databaseList[
'localhost']['dbList'] = []
# Update the database name
TransanaGlobal.configData.database = key
# Add the new (converted) database name to the database list
TransanaGlobal.configData.databaseList[
'localhost']['dbList'].append(
key.encode('utf8'))
# Start exception handling
try:
# If we're NOT in the lab version of Transana ...
if not TransanaConstants.labVersion:
# This is harder than it should be because of a combination of encoding and case-changing issues.
# Let's iterate through the Version 2.5 "paths by database" config data
for key2 in TransanaGlobal.configData.pathsByDB2.keys(
):
# If we have a LOCAL database with a matching key to the database being imported ...
if (key2[0] == '') and (
key2[1] == 'localhost'
) and (key2[2].decode('utf8').lower()
== key):
# Add the unconverted database's PATH values to the CONVERTED database's configuration!
TransanaGlobal.configData.pathsByDB[('', 'localhost', key.encode('utf8'))] = \
{'visualizationPath' : TransanaGlobal.configData.pathsByDB2[key2]['visualizationPath'],
'videoPath' : TransanaGlobal.configData.pathsByDB2[key2]['videoPath']}
# ... and we can stop looking
break
# Save the altered configuration data
TransanaGlobal.configData.SaveConfiguration()
# The Computer Lab version sometimes throws a KeyError
except exceptions.KeyError:
# If this comes up, we can ignore it.
pass
# Delete the Import File Information
os.remove(fs)
if DEBUG:
print "Done importing Files"
# We can only continue if we initialized the database OR are running MU.
if connectionEstablished:
# If a new database login fails three times, we need to close the program.
# Initialize a counter to track that.
logonCount = 1
# Flag if Logon succeeds
loggedOn = False
# Keep trying for three tries or until successful
while (logonCount <= 3) and (not loggedOn):
logonCount += 1
# Confirm the existence of the DB Tables, creating them if needed.
# This method also calls the Username and Password Dialog if needed.
# NOTE: The Menu Window must be created first to server as a parent for the Username and Password Dialog
# called up by DBInterface.
if DBInterface.establish_db_exists():
if DEBUG:
print "Creating Data Window",
# Create the Data Window
# Data Window creation causes Username and Password Dialog to be displayed,
# so it should be created before the Video Window
self.dataWindow = DataWindow.DataWindow(
TransanaGlobal.menuWindow)
if DEBUG:
print self.dataWindow.GetSize()
print "Creating Video Window",
# Create the Video Window
self.videoWindow = VideoWindow.VideoWindow(
TransanaGlobal.menuWindow)
# Create the Transcript Window. If on the Mac, include the Close button.
if DEBUG:
print self.videoWindow.GetSize()
print "Creating Transcript Window",
self.transcriptWindow = TranscriptionUI.TranscriptionUI(
TransanaGlobal.menuWindow,
includeClose=('wxMac' in wx.PlatformInfo))
if DEBUG:
print self.transcriptWindow.dlg.GetSize()
print "Creating Visualization Window",
# Create the Visualization Window
self.visualizationWindow = VisualizationWindow.VisualizationWindow(
TransanaGlobal.menuWindow)
if DEBUG:
print self.visualizationWindow.GetSize()
print "Creating Control Object"
# Create the Control Object and register all objects to be controlled with it
self.ControlObject = ControlObject()
self.ControlObject.Register(
Menu=TransanaGlobal.menuWindow,
Video=self.videoWindow,
Transcript=self.transcriptWindow,
Data=self.dataWindow,
Visualization=self.visualizationWindow)
# Set the active transcript
self.ControlObject.activeTranscript = 0
# Register the ControlObject with all other objects to be controlled
TransanaGlobal.menuWindow.Register(
ControlObject=self.ControlObject)
self.dataWindow.Register(ControlObject=self.ControlObject)
self.videoWindow.Register(ControlObject=self.ControlObject)
self.transcriptWindow.Register(
ControlObject=self.ControlObject)
self.visualizationWindow.Register(
ControlObject=self.ControlObject)
# Set the Application Top Window to the Menu Window (wxPython)
self.SetTopWindow(TransanaGlobal.menuWindow)
TransanaGlobal.resizingAll = True
if DEBUG:
print
print "Before Showing Windows:"
print " menu:\t\t", TransanaGlobal.menuWindow.GetRect(
)
print " visual:\t", self.visualizationWindow.GetRect()
print " video:\t", self.videoWindow.GetRect()
print " trans:\t", self.transcriptWindow.dlg.GetRect()
print " data:\t\t", self.dataWindow.GetRect()
print
print 'Heights:', self.transcriptWindow.dlg.GetRect(
)[1] + self.transcriptWindow.dlg.GetRect(
)[3], self.dataWindow.GetRect(
)[1] + self.dataWindow.GetRect()[3]
print
if self.transcriptWindow.dlg.GetRect(
)[1] + self.transcriptWindow.dlg.GetRect(
)[3] > self.dataWindow.GetRect(
)[1] + self.dataWindow.GetRect()[3]:
self.dataWindow.SetRect((self.dataWindow.GetRect()[0],
self.dataWindow.GetRect()[1],
self.dataWindow.GetRect()[2],
self.dataWindow.GetRect()[3] + \
(self.transcriptWindow.dlg.GetRect()[1] + self.transcriptWindow.dlg.GetRect()[3] - (self.dataWindow.GetRect()[1] + self.dataWindow.GetRect()[3]))))
print "DataWindow Height Adjusted!"
print " data:\t\t", self.dataWindow.GetRect()
print
# Show all Windows.
TransanaGlobal.menuWindow.Show(True)
if DEBUG:
print "Showing Windows:"
print " menu:", TransanaGlobal.menuWindow.GetRect()
self.visualizationWindow.Show()
if DEBUG:
print " visualization:", self.visualizationWindow.GetRect(
)
self.videoWindow.Show()
if DEBUG:
print " video:", self.videoWindow.GetRect(
), self.transcriptWindow.dlg.GetRect()
self.transcriptWindow.Show()
if DEBUG:
print " transcript:", self.transcriptWindow.dlg.GetRect(
), self.dataWindow.GetRect()
self.dataWindow.Show()
if DEBUG:
print " data:", self.dataWindow.GetRect(
), self.visualizationWindow.GetRect()
# Get the size and position of the Visualization Window
(x, y, w, h) = self.visualizationWindow.GetRect()
if DEBUG:
print
print "Call 3", 'Visualization', w + x
# Adjust the positions of all other windows to match the Visualization Window's initial position
self.ControlObject.UpdateWindowPositions('Visualization',
w + x + 1,
YUpper=h + y + 1)
TransanaGlobal.resizingAll = False
loggedOn = True
# If logon fails, inform user and offer to try again twice.
elif logonCount <= 3:
# Check to see if we have an SSL failure caused by insufficient data
if (not TransanaConstants.singleUserVersion) and TransanaGlobal.configData.ssl and \
(TransanaGlobal.configData.sslClientCert == '' or TransanaGlobal.configData.sslClientKey == ''):
# If so, inform the user
prompt = _(
"The information on the SSL tab is required to establish an SSL connection to the database.\nWould you like to try again?"
)
# Otherwise ...
else:
# ... give a generic message about logon failure.
prompt = _(
'Transana was unable to connect to the database.\nWould you like to try again?'
)
dlg = Dialogs.QuestionDialog(
TransanaGlobal.menuWindow, prompt,
_('Transana Database Connection'))
# If the user does not want to try again, set the counter to 4, which will cause the program to exit
if dlg.LocalShowModal() == wx.ID_NO:
logonCount = 4
# Clean up the Dialog Box
dlg.Destroy()
# If we successfully logged in ...
if loggedOn:
# ... save the configuration data that got us in
TransanaGlobal.configData.SaveConfiguration()
# if we're running the multi-user version of Transana and successfully connected to a database ...
if not TransanaConstants.singleUserVersion and loggedOn:
if DEBUG:
print "Need to connect to MessageServer"
# ... connect to the Message Server Here
TransanaGlobal.socketConnection = ChatWindow.ConnectToMessageServer(
)
# If the connections fails ...
if TransanaGlobal.socketConnection == None:
# ... signal that Transana should NOT start up!
loggedOn = False
else:
# If Transana MU sits idle too long (30 - 60 minutes), people would sometimes get a
# "Connection to Database Lost" error message even though MySQL was set to maintain the
# connection for 8 hours. To try to address this, we will set up a Timer that will run
# a simple query every 10 minutes to maintain the connection to the database.
# Create the Connection Timer
TransanaGlobal.connectionTimer = wx.Timer(self)
# Bind the timer to its event
self.Bind(wx.EVT_TIMER, self.OnTimer)
# Tell the timer to fire every 10 minutes.
# NOTE: If changing this value, it also needs to be changed in the ControlObjectClass.GetNewDatabase() method.
TransanaGlobal.connectionTimer.Start(600000)
if DEBUG:
print "MessageServer connected!"
# Check if the Database and Message Server are both using SSL and select the appropriate graphic
self.dataWindow.UpdateSSLStatus(TransanaGlobal.configData.ssl
and TransanaGlobal.chatIsSSL)
# if this is the first time this user profile has used Transana ...
if firstStartup and loggedOn:
# ... create a prompt about looking at the Tutorial
prompt = _(
'If this is your first time using Transana, the Transana Tutorial can help you learn how to use the program.'
)
prompt += '\n\n' + _(
'Would you like to see the Transana Tutorial now?')
# Display the Tutorial prompt in a Yes / No dialog
tmpDlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow,
prompt)
# If the user says Yes ...
if tmpDlg.LocalShowModal() == wx.ID_YES:
# ... start the Tutorial
self.ControlObject.Help('Welcome to the Transana Tutorial')
if DEBUG:
print
print "Final Windows:"
print " menu:\t\t", TransanaGlobal.menuWindow.GetRect()
print " visual:\t", self.visualizationWindow.GetRect()
print " video:\t", self.videoWindow.GetRect()
print " trans:\t", self.transcriptWindow.dlg.GetRect()
print " data:\t\t", self.dataWindow.GetRect()
print
else:
loggedOn = False
dlg = Dialogs.QuestionDialog(TransanaGlobal.menuWindow, msg,
_('Transana Database Connection'))
if dlg.LocalShowModal() == wx.ID_YES:
TransanaGlobal.configData.databaseDir = os.path.join(
TransanaGlobal.configData.GetDefaultProfilePath(),
'databases')
TransanaGlobal.configData.SaveConfiguration()
# Clean up the Dialog Box
dlg.Destroy()
return loggedOn
def __init__(self, parent, id, title, document_object):
""" Create the Transcript Properties form """
self.parent = parent
self.width = 500
self.height = 260
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(self,
parent,
id,
title,
size=(self.width, self.height),
style=wx.DEFAULT_DIALOG_STYLE
| wx.RESIZE_BORDER,
useSizers=True,
HelpContext='Document Properties')
# Define the form's main object
self.obj = document_object
# if a Library has been passed in ...
if self.obj.library_num > 0:
# ... get the Library's data
library = Library.Library(self.obj.library_num)
# If no Library has been passed in (ILLEGAL??) ...
else:
# ... create an empty Library
library = Library.Library()
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Add the Transcript ID element
self.id_edit = self.new_edit_box(_("Document ID"),
v1,
self.obj.id,
maxLen=100)
# Add the element to the sizer
mainSizer.Add(v1, 1, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Add the Library ID element
library_id_edit = self.new_edit_box(_("Library ID"), v2, library.id)
# Add the element to the main sizer
mainSizer.Add(v2, 1, wx.EXPAND)
# Disable Library ID
library_id_edit.Enable(False)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# If the Document has already been defined, we can skip this!
if self.obj.number == 0:
# Create a HORIZONTAL sizer for the next row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Add the Import File element
self.rtfname_edit = self.new_edit_box(
_("DOCX/RTF/XML/TXT File to import (optional)"), v3, '')
# Make this text box a File Drop Target
self.rtfname_edit.SetDropTarget(
EditBoxFileDropTarget(self.rtfname_edit))
# Add the element to the row sizer
r1Sizer.Add(v3, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r1Sizer.Add((10, 0))
# Add the Browse Button
browse = wx.Button(self.panel, -1, _("Browse"))
# Add the Browse Method to the Browse Button
wx.EVT_BUTTON(self, browse.GetId(), self.OnBrowseClick)
# Add the element to the sizer
r1Sizer.Add(browse, 0, wx.ALIGN_BOTTOM)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
r1Sizer.Add((2, 0))
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
else:
# Create a HORIZONTAL sizer for the next row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Add the Import File element
self.rtfname_edit = self.new_edit_box(_("Imported File"), v3,
self.obj.imported_file)
# Disable this field
self.rtfname_edit.Enable(False)
# Add the element to the row sizer
r1Sizer.Add(v3, 4, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r1Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v35 = wx.BoxSizer(wx.VERTICAL)
# If the import date is a datetime object ...
if isinstance(self.obj.import_date, datetime.datetime):
# ... get its YYYY-MM-DD representation
dtStr = self.obj.import_date.strftime('%Y-%m-%d')
# if the import date is None ...
elif self.obj.import_date is None:
# ... leave this field blank
dtStr = ''
# Otherwise ...
else:
# Use whatever the import date value is
dtStr = self.obj.import_date
# If no file was imported ...
if self.obj.imported_file == '':
# ... the date is the Document Creation Date
prompt = _("Creation Date")
# If a file was imported ...
else:
# ... the date is the Document Import Date
prompt = _("Import Date")
# Add the Import Date element
self.import_date = self.new_edit_box(prompt, v35, dtStr)
# Disable this field
self.import_date.Enable(False)
# Add the element to the row sizer
r1Sizer.Add(v35, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Add the Author element
author_edit = self.new_edit_box(_("Author"),
v4,
self.obj.author,
maxLen=100)
# Add the element to the main sizer
mainSizer.Add(v4, 1, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Add the Comment element
comment_edit = self.new_edit_box(_("Comment"),
v5,
self.obj.comment,
maxLen=255)
# Add the element to the main sizer
mainSizer.Add(v5, 1, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Keyword Group [label]
txt = wx.StaticText(self.panel, -1, _("Keyword Group"))
v6.Add(txt, 0, wx.BOTTOM, 3)
# Keyword Group [list box]
kw_groups_id = wx.NewId()
# Create an empty Keyword Group List for now. We'll populate it later (for layout reasons)
self.kw_groups = []
self.kw_group_lb = wx.ListBox(self.panel, kw_groups_id,
wx.DefaultPosition, wx.DefaultSize,
self.kw_groups)
v6.Add(self.kw_group_lb, 1, wx.EXPAND)
# Add the element to the sizer
r2Sizer.Add(v6, 1, wx.EXPAND)
self.kw_list = []
wx.EVT_LISTBOX(self, kw_groups_id, self.OnGroupSelect)
# Add a horizontal spacer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Keyword [label]
txt = wx.StaticText(self.panel, -1, _("Keyword"))
v7.Add(txt, 0, wx.BOTTOM, 3)
# Keyword [list box]
self.kw_lb = wx.ListBox(self.panel,
-1,
wx.DefaultPosition,
wx.DefaultSize,
self.kw_list,
style=wx.LB_EXTENDED)
v7.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX_DCLICK(self, self.kw_lb.GetId(), self.OnAddKW)
# Add the element to the sizer
r2Sizer.Add(v7, 1, wx.EXPAND)
# Add a horizontal spacer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Keyword transfer buttons
add_kw = wx.Button(self.panel, wx.ID_FILE2, ">>", wx.DefaultPosition)
v8.Add(add_kw, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self, wx.ID_FILE2, self.OnAddKW)
rm_kw = wx.Button(self.panel, wx.ID_FILE3, "<<", wx.DefaultPosition)
v8.Add(rm_kw, 0, wx.EXPAND | wx.TOP, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnRemoveKW)
kwm = wx.BitmapButton(self.panel, wx.ID_FILE4,
TransanaImages.KWManage.GetBitmap())
v8.Add(kwm, 0, wx.EXPAND | wx.TOP, 10)
# Add a spacer to increase the height of the Keywords section
v8.Add((0, 60))
kwm.SetToolTipString(_("Keyword Management"))
wx.EVT_BUTTON(self, wx.ID_FILE4, self.OnKWManage)
# Add the element to the sizer
r2Sizer.Add(v8, 0)
# Add a horizontal spacer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Episode Keywords [label]
txt = wx.StaticText(self.panel, -1, _("Document Keywords"))
v9.Add(txt, 0, wx.BOTTOM, 3)
# Episode Keywords [list box]
# Create an empty ListBox
self.ekw_lb = wx.ListBox(self.panel,
-1,
wx.DefaultPosition,
wx.DefaultSize,
style=wx.LB_EXTENDED)
v9.Add(self.ekw_lb, 1, wx.EXPAND)
self.ekw_lb.Bind(wx.EVT_KEY_DOWN, self.OnKeywordKeyDown)
# Add the element to the sizer
r2Sizer.Add(v9, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 5, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the Form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(self.width, width), height))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(self.width, width), height, -1, height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# We need to set some minimum sizes so the sizers will work right
self.kw_group_lb.SetSizeHints(minW=50, minH=20)
self.kw_lb.SetSizeHints(minW=50, minH=20)
self.ekw_lb.SetSizeHints(minW=50, minH=20)
# We populate the Keyword Groups, Keywords, and Clip Keywords lists AFTER we determine the Form Size.
# Long Keywords in the list were making the form too big!
self.kw_groups = DBInterface.list_of_keyword_groups()
for keywordGroup in self.kw_groups:
self.kw_group_lb.Append(keywordGroup)
# Select the Library Default Keyword Group in the Keyword Group list
if (library.keyword_group != '') and (self.kw_group_lb.FindString(
library.keyword_group) != wx.NOT_FOUND):
self.kw_group_lb.SetStringSelection(library.keyword_group)
# If no Default Keyword Group is defined, select the first item in the list
else:
# but only if there IS a first item in the list.
if len(self.kw_groups) > 0:
self.kw_group_lb.SetSelection(0)
if self.kw_group_lb.GetSelection() != wx.NOT_FOUND:
self.kw_list = \
DBInterface.list_of_keywords_by_group(self.kw_group_lb.GetStringSelection())
else:
self.kw_list = []
for keyword in self.kw_list:
self.kw_lb.Append(keyword)
# Populate the ListBox
for documentKeyword in self.obj.keyword_list:
self.ekw_lb.Append(documentKeyword.keywordPair)
# This is bad. Sorry.
# Create a hidden RichTextEditCtrl to use for importing data
self.hiddenRTC = RichTextEditCtrl_RTC.RichTextEditCtrl(self)
# This control should NOT be visible
self.hiddenRTC.Show(False)
# Set focus to the Transcript ID
self.id_edit.SetFocus()
def __init__(self, parent):
wx.Dialog.__init__(self,
parent,
-1,
_("sFTP Connection Parameters"),
size=(250, 520),
style=wx.CAPTION | wx.RESIZE_BORDER
| wx.NO_FULL_REPAINT_ON_RESIZE)
self.LoadConfiguration()
# Create a Sizer
box = wx.BoxSizer(wx.VERTICAL)
lblUserName = wx.StaticText(self, -1, _("User Name:"))
box.Add(lblUserName, 0, wx.LEFT, 10)
self.editUserName = wx.TextCtrl(self, -1)
box.Add(self.editUserName, 2,
wx.LEFT | wx.RIGHT | wx.BOTTOM | wx.EXPAND, 10)
lblPassword = wx.StaticText(self, -1, _("Password:"******"sFTP Server:"))
box.Add(lblsFTPServer, 0, wx.LEFT, 10)
self.editsFTPServer = wx.TextCtrl(self, -1, self.sFTPServer)
box.Add(self.editsFTPServer, 2,
wx.LEFT | wx.RIGHT | wx.BOTTOM | wx.EXPAND, 10)
lblsFTPPort = wx.StaticText(self, -1, _("sFTP Port:"))
box.Add(lblsFTPPort, 0, wx.LEFT, 10)
self.editsFTPPort = wx.TextCtrl(self, -1, self.sFTPPort)
box.Add(self.editsFTPPort, 2,
wx.LEFT | wx.RIGHT | wx.BOTTOM | wx.EXPAND, 10)
lblsFTPPublicKeyType = wx.StaticText(self, -1,
_("sFTP Server Public Key Type:"))
box.Add(lblsFTPPublicKeyType, 0, wx.LEFT, 10)
self.choicesFTPPublicKeyType = wx.Choice(
self, -1, choices=[_('None'), 'ssh-rsa', 'ssh-dss'])
self.choicesFTPPublicKeyType.SetStringSelection(self.sFTPPublicKeyType)
self.choicesFTPPublicKeyType.Bind(wx.EVT_CHOICE,
self.OnPublicKeyTypeSelect)
box.Add(self.choicesFTPPublicKeyType, 2,
wx.LEFT | wx.RIGHT | wx.BOTTOM | wx.EXPAND, 10)
lblsFTPPublicKey = wx.StaticText(self, -1,
_("sFTP Server Public Key:"))
box.Add(lblsFTPPublicKey, 0, wx.LEFT, 10)
self.editsFTPPublicKey = wx.TextCtrl(self, -1, self.sFTPPublicKey)
if self.sFTPPublicKeyType.encode('utf8') == _("None"):
self.editsFTPPublicKey.Enable(False)
box.Add(self.editsFTPPublicKey, 2,
wx.LEFT | wx.RIGHT | wx.BOTTOM | wx.EXPAND, 10)
btnBox = wx.BoxSizer(wx.HORIZONTAL)
btnBox.Add((20, 0))
btnConnect = wx.Button(self, wx.ID_OK, _("Connect"))
btnBox.Add(btnConnect, 1, wx.ALIGN_CENTER_HORIZONTAL)
# Make the Connect button the default
self.SetDefaultItem(btnConnect)
btnBox.Add((20, 0))
btnCancel = wx.Button(self, wx.ID_CANCEL, _("Cancel"))
btnBox.Add(btnCancel, 1, wx.ALIGN_CENTER_HORIZONTAL)
btnBox.Add((20, 0))
box.Add(btnBox, 0, wx.ALIGN_CENTER)
box.Add((0, 10))
self.SetSizer(box)
self.Fit()
self.Layout()
self.SetAutoLayout(True)
# Center on the Screen
TransanaGlobal.CenterOnPrimary(self)
# Set Focus
self.editUserName.SetFocus()
def __init__(self, parent, title, fileName, localDir, remoteDir, direction):
""" Set up the Dialog Box and all GUI Widgets. """
# Initialize the last update time
self.lastUpdate = time.time()
# Set up local variables
self.parent = parent
size = (350,200)
# Create the Dialog Box itself, with no minimize/maximize/close buttons
wx.Dialog.__init__(self, parent, -1, title, size = size, style=wx.CAPTION)
# Create a main VERTICAL sizer for the form
mainSizer = wx.BoxSizer(wx.VERTICAL)
# File label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("File: %s"), 'utf8')
else:
prompt = _("File: %s")
self.lblFile = wx.StaticText(self, -1, prompt % fileName, style=wx.ST_NO_AUTORESIZE)
# Add the label to the Main Sizer
mainSizer.Add(self.lblFile, 0, wx.ALL, 10)
# Progress Bar
self.progressBar = wx.Gauge(self, -1, 100, style=wx.GA_HORIZONTAL | wx.GA_SMOOTH)
# Add the element to the Main Sizer
mainSizer.Add(self.progressBar, 1, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Create a Row Sizer
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Bytes Transferred label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("%d bytes of %d transferred"), 'utf8')
else:
prompt = _("%d bytes of %d transferred")
self.lblBytes = wx.StaticText(self, -1, prompt % (100000000, 100000000), style=wx.ST_NO_AUTORESIZE)
# Add the label to the Row Sizer
r1Sizer.Add(self.lblBytes, 5, wx.EXPAND)
# Percent Transferred label
self.lblPercent = wx.StaticText(self, -1, "%5.1d %%" % 1000.1, style=wx.ST_NO_AUTORESIZE | wx.ALIGN_RIGHT)
# Add the Element to the Row Sizer
r1Sizer.Add(self.lblPercent, 1, wx.ALIGN_RIGHT)
# Add the Row Sizer to the Main Sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Create a Row Sizer
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Elapsed Time label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Elapsed Time: %d:%02d:%02d"), 'utf8')
else:
prompt = _("Elapsed Time: %d:%02d:%02d")
self.lblElapsedTime = wx.StaticText(self, -1, prompt % (0, 0, 0), style=wx.ST_NO_AUTORESIZE)
# Add the element to the Row Sizer
r2Sizer.Add(self.lblElapsedTime, 0)
# Add a spacer
r2Sizer.Add((1, 0), 1, wx.EXPAND)
# Remaining Time label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Time Remaining: %d:%02d:%02d"), 'utf8')
else:
prompt = _("Time Remaining: %d:%02d:%02d")
self.lblTimeRemaining = wx.StaticText(self, -1, prompt % (0, 0, 0), style=wx.ST_NO_AUTORESIZE | wx.ALIGN_RIGHT)
# Add the element to the Row Sizer
r2Sizer.Add(self.lblTimeRemaining, 0)
# Add the Row Sizer to the Main Sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Transfer Speed label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Transfer Speed: %d k/sec"), 'utf8')
else:
prompt = _("Transfer Speed: %d k/sec")
self.lblTransferSpeed = wx.StaticText(self, -1, prompt % 0, style=wx.ST_NO_AUTORESIZE)
# Add the element to the Main Sizer
mainSizer.Add(self.lblTransferSpeed, 0, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Cancel Button
self.btnCancel = wx.Button(self, wx.ID_CANCEL, _("Cancel Remaining Files"))
# Add the element to the Main Sizer
mainSizer.Add(self.btnCancel, 0, wx.ALIGN_CENTER | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
wx.EVT_BUTTON(self, wx.ID_CANCEL, self.OnCancel)
# Attach the main sizer to the form
self.SetSizer(mainSizer)
# Turn Auto Layout on
self.SetAutoLayout(True)
# Lay out the form
self.Layout()
# Center on the Screen
TransanaGlobal.CenterOnPrimary(self)
# Show the form
self.Show()
# make sure the loca directory ends with the proper path seperator character
if localDir[-1] != os.sep:
localDir = localDir + os.sep
# Initialize variables used in file transfer
BytesRead = 0
# "cancelled" is intialized to false. If the user cancels the file transfer,
# this variable gets set to true to signal the need to interrupt the transfer.
self.cancelled = False
# Note the starting time of the transfer for progress reporting purposes
self.StartTime = time.time()
# If we are sending files from the sFTP Server to the local File System...
if direction == sFTP_DOWNLOAD:
self.SetTitle(_('Downloading . . .'))
try:
FileResult = parent.sFTPClient.get(string.join([remoteDir, fileName], '/'), os.path.join(localDir, fileName), callback = self.UpdateDisplay)
except IOError:
prompt = unicode(_("Input / Output Error"), 'utf8') + "\n%s\n" + unicode(_('Please press "Refresh".'), 'utf8')
dlg = Dialogs.ErrorDialog(self, prompt % (sys.exc_info()[1]))
dlg.ShowModal()
dlg.Destroy()
# If we are sending data from the local file system to the sFTP Server ...
elif direction == sFTP_UPLOAD:
self.SetTitle(_('Uploading . . .'))
try:
# Detect Strings (instead of Unicode objects) and decode them if needed.
if isinstance(localDir, str):
localDir = localDir.decode(TransanaGlobal.encoding)
if isinstance(remoteDir, str):
remoteDir = remoteDir.decode(TransanaGlobal.encoding)
# Put the file and capture the result
FileResult = parent.sFTPClient.put(os.path.join(localDir, fileName), string.join([remoteDir, fileName], '/'), callback = self.UpdateDisplay)
except IOError:
prompt = unicode(_("Input / Output Error"), 'utf8') + "\n%s\n" + unicode(_('Please press "Refresh".'), 'utf8')
dlg = Dialogs.ErrorDialog(self, prompt % (sys.exc_info()[1]))
dlg.ShowModal()
dlg.Destroy()
def __init__(self, parent, id, title, snapshot_object):
# ... use the default Clip Properties Dialog size passed in from the config object. (This does NOT get saved.)
size = TransanaGlobal.configData.clipPropertiesSize
# Define the Help Context
HelpContext='Snapshot Properties'
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style. Signal that Propogation is included.
Dialogs.GenForm.__init__(self, parent, id, title, size=size, style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext=HelpContext)
# Define the minimum size for this dialog as the initial size
minWidth = 750
minHeight = 570
# Remember the Parent Window
self.parent = parent
# Remember the original Snapshot Object passed in
self.obj = snapshot_object
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Snapshot ID
self.id_edit = self.new_edit_box(_("Snapshot ID"), v1, self.obj.id, maxLen=100)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r1Sizer.Add((10, 0))
# Update the Snapshot's Collection ID based on the Snapshot's Collection Number
self.obj._sync_snapshot()
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Collection ID
collection_edit = self.new_edit_box(_("Collection ID"), v2, self.obj.GetNodeString(False))
# Add the element to the sizer
r1Sizer.Add(v2, 2, wx.EXPAND)
collection_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Image Filename
# If the image filename path is not empty, we should normalize the path specification
if self.obj.image_filename == '':
filePath = self.obj.image_filename
else:
filePath = os.path.normpath(self.obj.image_filename)
self.fname_edit = self.new_edit_box(_("Image Filename"), v3, filePath)
r2Sizer.Add(v3, 5, wx.EXPAND)
r2Sizer.Add((10, 0))
# Browse button layout
btnBrowse = wx.Button(self.panel, wx.ID_FILE1, _("Browse"), wx.DefaultPosition)
r2Sizer.Add(btnBrowse, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self, wx.ID_FILE1, self.OnBrowse)
# Figure out if the Snapshot Button should be displayed
if ((isinstance(self.parent.ControlObject.currentObj, Episode.Episode)) or \
(isinstance(self.parent.ControlObject.currentObj, Clip.Clip))) and \
(len(self.parent.ControlObject.VideoWindow.mediaPlayers) == 1):
# Add a horizontal spacer
r2Sizer.Add((10, 0))
# Snapshot button layout
# Create the Snapshot button
btnSnapshot = wx.BitmapButton(self.panel, -1, TransanaImages.Snapshot.GetBitmap(), size=(48, 24))
# Set the Help String
btnSnapshot.SetToolTipString(_("Capture Snapshot for Coding"))
r2Sizer.Add(btnSnapshot, 0, wx.EXPAND | wx.TOP, 20)
# Bind the Snapshot button to its event handler
btnSnapshot.Bind(wx.EVT_BUTTON, self.OnSnapshot)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r4Sizer = wx.BoxSizer(wx.HORIZONTAL)
self.seriesList = DBInterface.list_of_series()
seriesRecs = ['']
serDefault = 0
for (seriesNum, seriesName) in self.seriesList:
seriesRecs.append(seriesName)
if self.obj.series_num == seriesNum:
serDefault = len(seriesRecs) - 1
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Library ID
self.series_cb = self.new_choice_box(_("Library ID"), v4, seriesRecs, default = serDefault)
# Add the element to the sizer
r4Sizer.Add(v4, 1, wx.EXPAND)
self.series_cb.Bind(wx.EVT_CHOICE, self.OnSeriesChoice)
# Add a horizontal spacer to the row sizer
r4Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Episode ID
self.episode_cb = self.new_choice_box(_("Episode ID"), v5, [''])
# Add the element to the sizer
r4Sizer.Add(v5, 1, wx.EXPAND)
self.episode_cb.Bind(wx.EVT_CHOICE, self.OnEpisodeChoice)
self.episodeList = []
if self.obj.series_id != '':
self.PopulateEpisodeChoiceBasedOnSeries(self.obj.series_id)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r4Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Episode ID
self.transcript_cb = self.new_choice_box(_("Transcript ID"), v6, [''])
# Add the element to the sizer
r5Sizer.Add(v6, 2, wx.EXPAND)
self.transcript_cb.Bind(wx.EVT_CHOICE, self.OnTranscriptChoice)
self.transcriptList = []
if self.obj.episode_id != '':
self.PopulateTranscriptChoiceBasedOnEpisode(self.obj.series_id, self.obj.episode_id)
# Add a horizontal spacer to the row sizer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Episode Time Code. Convert to HH:MM:SS.mm
self.episode_start_edit = self.new_edit_box(_("Episode Position"), v7, Misc.time_in_ms_to_str(self.obj.episode_start))
# Add the element to the sizer
r5Sizer.Add(v7, 1, wx.EXPAND)
if self.episode_cb.GetStringSelection() == '':
self.episode_start_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r5Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v8 = wx.BoxSizer(wx.VERTICAL)
# Episode Duration. Convert to HH:MM:SS.mm
self.episode_duration_edit = self.new_edit_box(_("Duration"), v8, Misc.time_in_ms_to_str(self.obj.episode_duration))
# Add the element to the sizer
r5Sizer.Add(v8, 1, wx.EXPAND)
if self.episode_cb.GetStringSelection() == '':
self.episode_duration_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r6Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v9 = wx.BoxSizer(wx.VERTICAL)
# Comment
comment_edit = self.new_edit_box(_("Comment"), v9, self.obj.comment, maxLen=255)
# Add the element to the sizer
r6Sizer.Add(v9, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r6Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r7Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v10 = wx.BoxSizer(wx.VERTICAL)
# Keyword Group [label]
txt = wx.StaticText(self.panel, -1, _("Keyword Group"))
v10.Add(txt, 0, wx.BOTTOM, 3)
# Keyword Group [list box]
# Create an empty Keyword Group List for now. We'll populate it later (for layout reasons)
self.kw_groups = []
self.kw_group_lb = wx.ListBox(self.panel, -1, choices = self.kw_groups)
v10.Add(self.kw_group_lb, 1, wx.EXPAND)
# Add the element to the sizer
r7Sizer.Add(v10, 1, wx.EXPAND)
# Create an empty Keyword List for now. We'll populate it later (for layout reasons)
self.kw_list = []
wx.EVT_LISTBOX(self, self.kw_group_lb.GetId(), self.OnGroupSelect)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v11 = wx.BoxSizer(wx.VERTICAL)
# Keyword [label]
txt = wx.StaticText(self.panel, -1, _("Keyword"))
v11.Add(txt, 0, wx.BOTTOM, 3)
# Keyword [list box]
self.kw_lb = wx.ListBox(self.panel, -1, choices = self.kw_list, style=wx.LB_EXTENDED)
v11.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX_DCLICK(self, self.kw_lb.GetId(), self.OnAddKW)
# Add the element to the sizer
r7Sizer.Add(v11, 1, wx.EXPAND)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v12 = wx.BoxSizer(wx.VERTICAL)
# Keyword transfer buttons
add_kw = wx.Button(self.panel, wx.ID_FILE2, ">>", wx.DefaultPosition)
v12.Add(add_kw, 0, wx.EXPAND | wx.TOP, 20)
wx.EVT_BUTTON(self, wx.ID_FILE2, self.OnAddKW)
rm_kw = wx.Button(self.panel, wx.ID_FILE3, "<<", wx.DefaultPosition)
v12.Add(rm_kw, 0, wx.EXPAND | wx.TOP, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnRemoveKW)
kwm = wx.BitmapButton(self.panel, wx.ID_FILE4, TransanaImages.KWManage.GetBitmap())
v12.Add(kwm, 0, wx.EXPAND | wx.TOP, 10)
# Add a spacer to increase the height of the Keywords section
v12.Add((0, 60))
kwm.SetToolTipString(_("Keyword Management"))
wx.EVT_BUTTON(self, wx.ID_FILE4, self.OnKWManage)
# Add the element to the sizer
r7Sizer.Add(v12, 0)
# Add a horizontal spacer
r7Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v13 = wx.BoxSizer(wx.VERTICAL)
# Whole Snapshot Keywords [label]
txt = wx.StaticText(self.panel, -1, _("Whole Snapshot Keywords"))
v13.Add(txt, 0, wx.BOTTOM, 3)
# Clip Keywords [list box]
# Create an empty ListBox. We'll populate it later for layout reasons.
self.ekw_lb = wx.ListBox(self.panel, -1, style=wx.LB_EXTENDED)
v13.Add(self.ekw_lb, 1, wx.EXPAND)
self.ekw_lb.Bind(wx.EVT_KEY_DOWN, self.OnKeywordKeyDown)
# Add the element to the sizer
r7Sizer.Add(v13, 2, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r7Sizer, 5, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
## # Because of the way Clips are created (with Drag&Drop / Cut&Paste functions), we have to trap the missing
## # ID error here. Therefore, we need to override the EVT_BUTTON for the OK Button.
## # Since we don't have an object for the OK Button, we use FindWindowById to find it based on its ID.
## self.Bind(wx.EVT_BUTTON, self.OnOK, self.FindWindowById(wx.ID_OK))
## # We also need to intercept the Cancel button.
## self.Bind(wx.EVT_BUTTON, self.OnCancel, self.FindWindowById(wx.ID_CANCEL))
##
## self.Bind(wx.EVT_SIZE, self.OnSize)
##
# Set the main sizer
self.panel.SetSizer(mainSizer)
# Tell the panel to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(minWidth, width), max(minHeight, height)))
# Define the minimum size for this dialog as the current size
self.SetSizeHints(max(minWidth, width), max(minHeight, height))
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# We need to set some minimum sizes so the sizers will work right
self.kw_group_lb.SetSizeHints(minW = 50, minH = 20)
self.kw_lb.SetSizeHints(minW = 50, minH = 20)
self.ekw_lb.SetSizeHints(minW = 50, minH = 20)
# We populate the Keyword Groups, Keywords, and Clip Keywords lists AFTER we determine the Form Size.
# Long Keywords in the list were making the form too big!
self.kw_groups = DBInterface.list_of_keyword_groups()
for keywordGroup in self.kw_groups:
self.kw_group_lb.Append(keywordGroup)
# Populate the Keywords ListBox
# Load the parent Collection in order to determine the default Keyword Group
tempCollection = Collection.Collection(self.obj.collection_num)
# Select the Collection Default Keyword Group in the Keyword Group list
if (tempCollection.keyword_group != '') and (self.kw_group_lb.FindString(tempCollection.keyword_group) != wx.NOT_FOUND):
self.kw_group_lb.SetStringSelection(tempCollection.keyword_group)
# If no Default Keyword Group is defined, select the first item in the list
else:
# but only if there IS a first item.
if len(self.kw_groups) > 0:
self.kw_group_lb.SetSelection(0)
# If there's a selected keyword group ...
if self.kw_group_lb.GetSelection() != wx.NOT_FOUND:
# populate the Keywords list
self.kw_list = \
DBInterface.list_of_keywords_by_group(self.kw_group_lb.GetStringSelection())
else:
# If not, create a blank one
self.kw_list = []
for keyword in self.kw_list:
self.kw_lb.Append(keyword)
# Populate the Snapshot Keywords ListBox
# If the snapshot object has keywords ...
for snapshotKeyword in self.obj.keyword_list:
# ... add them to the keyword list
self.ekw_lb.Append(snapshotKeyword.keywordPair)
# Set initial focus to the Clip ID
self.id_edit.SetFocus()
def __init__(self):
""" Create and display the About Dialog Box """
# Define the initial size
if '__WXMAC__' in wx.PlatformInfo:
width = 400
else:
width = 370
height = 425
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a Dialog Box
wx.Dialog.__init__(self,
None,
-1,
_("About Transana"),
size=(width, height),
style=wx.CAPTION | wx.WANTS_CHARS)
# OS X requires the Small Window Variant to look right
if "__WXMAC__" in wx.PlatformInfo:
self.SetWindowVariant(wx.WINDOW_VARIANT_SMALL)
# Create a label for the Program Title
title = wx.StaticText(self, -1, _("Transana"), style=wx.ALIGN_CENTRE)
# Specify 16pt Bold font
font = wx.Font(16, wx.SWISS, wx.NORMAL, wx.BOLD)
# Apply this font to the Title
title.SetFont(font)
# Add the title to the main sizer
mainSizer.Add(
title, 0,
wx.ALIGN_CENTER | wx.TOP | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the Program Version
# Build the Version label
if TransanaConstants.singleUserVersion:
if TransanaConstants.labVersion:
versionLbl = _("Computer Lab Version")
elif TransanaConstants.demoVersion:
versionLbl = _("Demonstration Version")
elif TransanaConstants.workshopVersion:
versionLbl = _("Workshop Version")
else:
if TransanaConstants.proVersion:
versionLbl = _("Professional Version")
else:
versionLbl = _("Basic Version")
else:
versionLbl = _("Multi-user Version")
versionLbl += " %s"
version = wx.StaticText(self,
-1,
versionLbl % TransanaConstants.versionNumber,
style=wx.ALIGN_CENTRE)
# Specify 10pt Bold font
font = wx.Font(10, wx.SWISS, wx.NORMAL, wx.BOLD)
# Apply the font to the Version Label
version.SetFont(font)
# Add the version to the main sizer
mainSizer.Add(version, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the Program Copyright
str = _("Copyright 2002 - 2017\nSpurgeon Woods LLC")
copyright = wx.StaticText(self, -1, str, style=wx.ALIGN_CENTRE)
# Apply the last specified font (from Program Version) to the copyright label
font = self.GetFont()
copyright.SetFont(font)
# Add the copyright to the main sizer
mainSizer.Add(copyright, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the Program Description, including GNU License information
self.description_str = _(
"Transana is written by David K. Woods, Ph.D.\nOther contributors include: Chris Fassnacht, Jonathan Beavers, \nNate Case, Mark Kim, Rajas Sambhare and David Mandelin"
)
self.description = wx.StaticText(self,
-1,
self.description_str,
style=wx.ALIGN_CENTRE)
# Add the description to the main sizer
mainSizer.Add(self.description, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the Program Authoring Credits
self.credits_str = _(
"Transana is a product of Spurgeon Woods LLC.\nIt is released with no warranty \nunder the GNU General Public License (GPL). \nFor more information, see http://www.gnu.org."
)
self.credits_str += ".\n" + _(
"Methodology consultants: Paul Dempster, Chris Thorn,\nand Nicolas Sheon."
)
self.credits = wx.StaticText(self,
-1,
self.credits_str,
style=wx.ALIGN_CENTRE)
# Add the credits to the main sizer
mainSizer.Add(self.credits, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the Translation Credits
if TransanaGlobal.configData.language == 'en':
str = 'Documentation written by David K. Woods\nwith assistance and editing by Becky Holmes.'
elif TransanaGlobal.configData.language == 'ar':
str = _("Arabic translation provided by\n.")
elif TransanaGlobal.configData.language == 'da':
str = _(
"Danish translation provided by\nChris Kjeldsen, Aalborg University."
)
elif TransanaGlobal.configData.language == 'de':
str = _(
"German translation provided by Tobias Reu, New York University.\n."
)
elif TransanaGlobal.configData.language == 'el':
str = _("Greek translation provided by\n.")
elif TransanaGlobal.configData.language == 'es':
str = _(
"Spanish translation provided by\nNate Case, UW Madison, and Paco Molinero, Barcelone, Spain"
)
elif TransanaGlobal.configData.language == 'fi':
str = _(
"Finnish translation provided by\nMiia Collanus, University of Helsinki, Finland"
)
elif TransanaGlobal.configData.language == 'fr':
str = _(
"French translation provided by\nDr. Margot Kaszap, Ph. D., Universite Laval, Quebec, Canada."
)
elif TransanaGlobal.configData.language == 'he':
str = _("Hebrew translation provided by\n.")
elif TransanaGlobal.configData.language == 'it':
str = _(
"Italian translation provided by\nFabio Malfatti, Centro Ricerche EtnoAntropologiche www.creasiena.it\nPeri Weingrad, University of Michigan & Terenziano Speranza, Rome, Italy\nDorian Soru, Ph. D. e ICLab, www.iclab.eu, Padova, Italia"
)
elif TransanaGlobal.configData.language == 'nl':
str = _("Dutch translation provided by\nFleur van der Houwen.")
elif TransanaGlobal.configData.language in ['nb', 'nn']:
str = _(
"Norwegian translations provided by\nDr. Dan Yngve Jacobsen, Department of Psychology,\nNorwegian University of Science and Technology, Trondheim"
)
elif TransanaGlobal.configData.language == 'pl':
str = _("Polish translation provided by\n.")
elif TransanaGlobal.configData.language == 'pt':
str = _("Portuguese translation provided by\n.")
elif TransanaGlobal.configData.language == 'ru':
str = _("Russian translation provided by\nViktor Ignatjev.")
elif TransanaGlobal.configData.language == 'sv':
str = _(
"Swedish translation provided by\nJohan Gille, Stockholm University, Sweden"
)
elif TransanaGlobal.configData.language == 'zh':
str = _(
"Chinese translation provided by\nZhong Hongquan, Beijin Poweron Technology Co.Ltd.,\nmaintained by Bei Zhang, University of Wisconsin."
)
self.translations_str = str
self.translations = wx.StaticText(self,
-1,
self.translations_str,
style=wx.ALIGN_CENTRE)
# Add the transcription credit to the main sizer
mainSizer.Add(self.translations, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Create a label for the FFmpeg Credits
self.ffmpeg_str = _(
"This software uses libraries from the FFmpeg project\nunder the LGPLv2.1 or GNU-GPL. Transana's copyright\ndoes not extend to the FFmpeg libraries or code.\nPlease see http://www.ffmpeg.com."
)
self.ffmpeg = wx.StaticText(self,
-1,
self.ffmpeg_str,
style=wx.ALIGN_CENTRE)
# Add the FFmpeg Credits to the main sizer
mainSizer.Add(self.ffmpeg, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
## if ('wxMac' in wx.PlatformInfo): # and \
## #(('alpha' in TransanaConstants.versionNumber.lower()) or ('beta' in TransanaConstants.versionNumber.lower())):
## self.tmpInput = wx.TextCtrl(self, -1, "DELETE ME!", pos=(0, 0), size=(1, 1))
## self.tmpInput.Bind(wx.EVT_KEY_UP, self.OnKeyUp)
## self.tmpInput.SetFocus()
# Create an OK button
btnOK = wx.Button(self, wx.ID_OK, _("OK"))
# Add the OK button to the main sizer
mainSizer.Add(btnOK, 0,
wx.ALIGN_CENTER | wx.BOTTOM | wx.LEFT | wx.RIGHT, 12)
# Add the Keyboard Event for the Easter Egg screen
self.Bind(wx.EVT_KEY_UP, self.OnKeyUp)
btnOK.Bind(wx.EVT_KEY_UP, self.OnKeyUp)
# Define the form's Sizer
self.SetSizer(mainSizer)
# Lay out the form
self.SetAutoLayout(True)
self.Layout()
# Fit the form to the contained controls
self.Fit()
# Center on screen
# self.CentreOnScreen()
TransanaGlobal.CenterOnPrimary(self)
# Show the About Dialog Box modally
val = self.ShowModal()
# Destroy the Dialog Box when done with it
self.Destroy()
# Dialog Box Initialization returns "None" as the result (see wxPython documentation)
return None
def __init__(self, parent, defaultKWGroup=None, deleteEnabled=True):
"""Initialize a KWManager object."""
# Remember the value for deleteEnabled
self.deleteEnabled = deleteEnabled
wx.Dialog.__init__(self,
parent,
-1,
_("Keyword Management"),
wx.DefaultPosition,
wx.Size(550, 420),
style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER)
# To look right, the Mac needs the Small Window Variant.
if "__WXMAC__" in wx.PlatformInfo:
self.SetWindowVariant(wx.WINDOW_VARIANT_SMALL)
# Define the minimum size for this dialog as the initial size
self.SetSizeHints(550, 420)
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Keyword Group
txt = wx.StaticText(self, -1, _("Keyword Group"))
mainSizer.Add(txt, 0, wx.LEFT | wx.RIGHT | wx.TOP, 10)
mainSizer.Add((0, 3))
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
self.kw_group = wx.Choice(self, 101, wx.DefaultPosition,
wx.DefaultSize, [])
r1Sizer.Add(self.kw_group, 5, wx.EXPAND)
wx.EVT_CHOICE(self, 101, self.OnGroupSelect)
r1Sizer.Add((10, 0))
# Create a new Keyword Group button
new_kwg = wx.Button(self, wx.ID_FILE1, _("Create a New Keyword Group"))
r1Sizer.Add(new_kwg, 3, wx.EXPAND)
wx.EVT_BUTTON(self, wx.ID_FILE1, self.OnNewKWG)
mainSizer.Add(r1Sizer, 0, wx.EXPAND | wx.LEFT | wx.RIGHT, 10)
mainSizer.Add((0, 10))
# Keywords label+listbox
txt = wx.StaticText(self, -1, _("Keywords"))
mainSizer.Add(txt, 0, wx.LEFT, 10)
# Create a HORIZONTAL sizer for the first row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
v1 = wx.BoxSizer(wx.VERTICAL)
if 'wxMac' in wx.PlatformInfo:
style = wx.LB_SINGLE
else:
style = wx.LB_SINGLE | wx.LB_SORT
self.kw_lb = wx.ListBox(self,
100,
wx.DefaultPosition,
wx.DefaultSize, [],
style=style)
v1.Add(self.kw_lb, 1, wx.EXPAND)
wx.EVT_LISTBOX(self, 100, self.OnKeywordSelect)
wx.EVT_LISTBOX_DCLICK(self, 100, self.OnKeywordDoubleClick)
r2Sizer.Add(v1, 5, wx.EXPAND)
r2Sizer.Add((10, 0))
v2 = wx.BoxSizer(wx.VERTICAL)
# Add Keyword to List button
add_kw = wx.Button(self, wx.ID_FILE2, _("Add Keyword to List"))
v2.Add(add_kw, 0, wx.EXPAND | wx.BOTTOM, 10)
wx.EVT_BUTTON(self, wx.ID_FILE2, self.OnAddKW)
# Edit Keyword button
self.edit_kw = wx.Button(self, -1, _("Edit Keyword"))
v2.Add(self.edit_kw, 0, wx.EXPAND | wx.BOTTOM, 10)
wx.EVT_BUTTON(self, self.edit_kw.GetId(), self.OnEditKW)
self.edit_kw.Enable(False)
# Delete Keyword from List button
self.del_kw = wx.Button(self, wx.ID_FILE3,
_("Delete Keyword from List"))
v2.Add(self.del_kw, 0, wx.EXPAND | wx.BOTTOM, 10)
wx.EVT_BUTTON(self, wx.ID_FILE3, self.OnDelKW)
self.del_kw.Enable(False)
# Definition box
def_txt = wx.StaticText(self, -1, _("Definition"))
v2.Add(def_txt, 0, wx.BOTTOM, 3)
self.definition = wx.TextCtrl(self, -1, '', style=wx.TE_MULTILINE)
v2.Add(self.definition, 1, wx.EXPAND | wx.BOTTOM, 10)
self.definition.Enable(False)
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Dialog Close button
close = wx.Button(self, wx.ID_CLOSE, _("Close"))
btnSizer.Add(close, 1, wx.EXPAND | wx.RIGHT, 10)
close.SetDefault()
wx.EVT_BUTTON(self, wx.ID_CLOSE, self.OnClose)
# We don't want to use wx.ID_HELP here, as that causes the Help buttons to be replaced with little question
# mark buttons on the Mac, which don't look good.
ID_HELP = wx.NewId()
# Dialog Help button
helpBtn = wx.Button(self, ID_HELP, _("Help"))
btnSizer.Add(helpBtn, 1, wx.EXPAND)
wx.EVT_BUTTON(self, ID_HELP, self.OnHelp)
v2.Add(btnSizer, 0, wx.EXPAND)
r2Sizer.Add(v2, 3, wx.EXPAND)
mainSizer.Add(r2Sizer, 1, wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM,
10)
self.SetSizer(mainSizer)
self.SetAutoLayout(True)
self.Layout()
TransanaGlobal.CenterOnPrimary(self)
self.kw_groups = DBInterface.list_of_keyword_groups()
for kwg in self.kw_groups:
self.kw_group.Append(kwg)
if len(self.kw_groups) > 0:
if defaultKWGroup != None:
selPos = self.kw_group.FindString(defaultKWGroup)
else:
selPos = 0
self.kw_group.SetSelection(selPos)
self.kw_list = DBInterface.list_of_keywords_by_group(
self.kw_group.GetString(selPos))
else:
self.kw_list = []
for kw in self.kw_list:
self.kw_lb.Append(kw)
if len(self.kw_list) > 0:
self.kw_lb.SetSelection(0, False)
self.ShowModal()
def __init__(self,parent,id,seriesNum=0, episodeNum=0, collectionNum=0):
# Remember the Library, episode or collection that triggered creation of this export
self.seriesNum = seriesNum
self.episodeNum = episodeNum
self.collectionNum = collectionNum
# Set the encoding for export.
# Use UTF-8 regardless of the current encoding for consistency in the Transana XML files
EXPORT_ENCODING = 'utf8'
# Create a form to get the name of the file to receive the data
# Define the form title
title = _("Transana Selective Data Export")
Dialogs.GenForm.__init__(self, parent, id, title, (550,150), style=wx.DEFAULT_DIALOG_STYLE | wx.RESIZE_BORDER,
useSizers = True, HelpContext='Selective Data Export')
# Create an invisible instance of RichTextEditCtrl. This allows us to
# get away with converting fastsaved documents to RTF behind the scenes.
# Then we can simply pull the RTF data out of this object and write it
# to the desired file.
self.invisibleSTC = RichTextEditCtrl(self)
self.invisibleSTC.Show(False)
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Export Message
# If the XML filename path is not empty, we need to tell the user.
prompt = _('Please create an Transana XML File for export.')
exportText = wx.StaticText(self.panel, -1, prompt)
# Add the export message to the dialog box
r1Sizer.Add(exportText, 0)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Export Filename Layout
self.XMLFile = self.new_edit_box(_("Transana Export XML-Filename"), lay, '')
self.XMLFile.SetDropTarget(EditBoxFileDropTarget(self.XMLFile))
# Add the element sizer to the row sizer
r2Sizer.Add(v1, 1, wx.EXPAND)
# Add a spacer to the row sizer
r2Sizer.Add((10, 0))
# Browse button
browse = wx.Button(self.panel, wx.ID_FILE1, _("Browse"), wx.DefaultPosition)
wx.EVT_BUTTON(self, wx.ID_FILE1, self.OnBrowse)
# Add the element to the row sizer
r2Sizer.Add(browse, 0, wx.ALIGN_BOTTOM)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(550, width), height))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(550, width), height, -1, height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# Set focus to the XML file field
self.XMLFile.SetFocus()
def __init__(self, parent, id, title, transcript_object):
""" Create the Transcript Properties form """
self.width = 500
self.height = 260
# Make the Keyword Edit List resizable by passing wx.RESIZE_BORDER style
Dialogs.GenForm.__init__(self,
parent,
id,
title,
size=(self.width, self.height),
style=wx.DEFAULT_DIALOG_STYLE
| wx.RESIZE_BORDER,
useSizers=True,
HelpContext='Transcript Properties')
# Define the form's main object
self.obj = transcript_object
# Create the form's main VERTICAL sizer
mainSizer = wx.BoxSizer(wx.VERTICAL)
# Create a HORIZONTAL sizer for the first row
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v1 = wx.BoxSizer(wx.VERTICAL)
# Add the Transcript ID element
self.id_edit = self.new_edit_box(_("Transcript ID"),
v1,
self.obj.id,
maxLen=100)
# Add the element to the sizer
r1Sizer.Add(v1, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r1Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v2 = wx.BoxSizer(wx.VERTICAL)
# Add the Library ID element
series_id_edit = self.new_edit_box(_("Library ID"), v2,
self.obj.series_id)
# Add the element to the row sizer
r2Sizer.Add(v2, 1, wx.EXPAND)
# Disable Library ID
series_id_edit.Enable(False)
# Add a horizontal spacer to the row sizer
r2Sizer.Add((10, 0))
# Create a VERTICAL sizer for the next element
v3 = wx.BoxSizer(wx.VERTICAL)
# Add the Episode ID element
episode_id_edit = self.new_edit_box(_("Episode ID"), v3,
self.obj.episode_id)
# Add the element to the row sizer
r2Sizer.Add(v3, 1, wx.EXPAND)
# Disable Episode ID
episode_id_edit.Enable(False)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r2Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r3Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v4 = wx.BoxSizer(wx.VERTICAL)
# Add the Transcriber element
transcriber_edit = self.new_edit_box(_("Transcriber"),
v4,
self.obj.transcriber,
maxLen=100)
# Add the element to the row sizer
r3Sizer.Add(v4, 3, wx.EXPAND | wx.RIGHT, 10)
# Create a VERTICAL sizer for the next element
v7 = wx.BoxSizer(wx.VERTICAL)
# Add the Min Transcript Width element
mintranscriptwidth = self.new_edit_box(
_("Min. Width"), v7, str(self.obj.minTranscriptWidth))
# Add the element to the row sizer
r3Sizer.Add(v7, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r3Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r4Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v5 = wx.BoxSizer(wx.VERTICAL)
# Add the Comment element
comment_edit = self.new_edit_box(_("Comment"),
v5,
self.obj.comment,
maxLen=255)
# Add the element to the row sizer
r4Sizer.Add(v5, 1, wx.EXPAND)
# Add the row sizer to the main vertical sizer
mainSizer.Add(r4Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a HORIZONTAL sizer for the next row
r5Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Create a VERTICAL sizer for the next element
v6 = wx.BoxSizer(wx.VERTICAL)
# Add the Import File element
self.rtfname_edit = self.new_edit_box(
_("DOCX/RTF/XML/TXT File to import (optional)"), v6, '')
# Make this text box a File Drop Target
self.rtfname_edit.SetDropTarget(
EditBoxFileDropTarget(self.rtfname_edit))
# Add the element to the row sizer
r5Sizer.Add(v6, 1, wx.EXPAND)
# Add a horizontal spacer to the row sizer
r5Sizer.Add((10, 0))
# Add the Browse Button
browse = wx.Button(self.panel, -1, _("Browse"))
# Add the Browse Method to the Browse Button
wx.EVT_BUTTON(self, browse.GetId(), self.OnBrowseClick)
# Add the element to the sizer
r5Sizer.Add(browse, 0, wx.ALIGN_BOTTOM)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
r5Sizer.Add((2, 0))
# Add the row sizer to the main vertical sizer
mainSizer.Add(r5Sizer, 0, wx.EXPAND)
# Add a vertical spacer to the main sizer
mainSizer.Add((0, 10))
# Create a sizer for the buttons
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
# Add the buttons
self.create_buttons(sizer=btnSizer)
# Add the button sizer to the main sizer
mainSizer.Add(btnSizer, 0, wx.EXPAND)
# If Mac ...
if 'wxMac' in wx.PlatformInfo:
# ... add a spacer to avoid control clipping
mainSizer.Add((0, 2))
# Set the PANEL's main sizer
self.panel.SetSizer(mainSizer)
# Tell the PANEL to auto-layout
self.panel.SetAutoLayout(True)
# Lay out the Panel
self.panel.Layout()
# Lay out the panel on the form
self.Layout()
# Resize the form to fit the contents
self.Fit()
# Get the new size of the form
(width, height) = self.GetSizeTuple()
# Reset the form's size to be at least the specified minimum width
self.SetSize(wx.Size(max(self.width, width), height))
# Define the minimum size for this dialog as the current size, and define height as unchangeable
self.SetSizeHints(max(self.width, width), height, -1, height)
# Center the form on screen
TransanaGlobal.CenterOnPrimary(self)
# This is bad. Sorry.
# Create a hidden RichTextEditCtrl to use for importing data
self.hiddenRTC = RichTextEditCtrl_RTC.RichTextEditCtrl(self)
# This control should NOT be visible
self.hiddenRTC.Show(False)
# Set focus to the Transcript ID
self.id_edit.SetFocus()
def __init__(self, parent, title, copyFrom, copyTo):
""" Set up the Dialog Box and all GUI Widgets. """
if (os.path.exists(copyFrom)):
# Set up local variables
self.parent = parent
# Initialize Threaded File Copy object and the timer that updates the progress dialog
self.threadedFileCopy = None
self.timer = None
size = (350, 200)
# Create the Dialog Box itself, with no minimize/maximize/close buttons
wx.Dialog.__init__(self,
parent,
-1,
title,
size=size,
style=wx.CAPTION)
# Create a main VERTICAL sizer for the form
mainSizer = wx.BoxSizer(wx.VERTICAL)
# File label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("File: %s"), 'utf8')
else:
prompt = _("File: %s")
# extract the file name...
(dir, fileName) = os.path.split(copyFrom)
self.destFileStr = os.path.join(copyTo, fileName)
self.lblFile = wx.StaticText(self,
-1,
prompt % fileName,
style=wx.ST_NO_AUTORESIZE)
# Add the label to the Main Sizer
mainSizer.Add(self.lblFile, 0, wx.ALL, 10)
# Progress Bar
self.progressBar = wx.Gauge(self,
-1,
100,
style=wx.GA_HORIZONTAL | wx.GA_SMOOTH)
# Add the element to the Main Sizer
mainSizer.Add(self.progressBar, 1,
wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Create a Row Sizer
r1Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Bytes Transferred label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("%d bytes of %d transferred"), 'utf8')
else:
prompt = _("%d bytes of %d transferred")
self.lblBytes = wx.StaticText(self,
-1,
prompt % (100000000, 100000000),
style=wx.ST_NO_AUTORESIZE)
# Add the label to the Row Sizer
r1Sizer.Add(self.lblBytes, 5, wx.EXPAND)
# Percent Transferred label
self.lblPercent = wx.StaticText(self,
-1,
"%5.1d %%" % 1000.1,
style=wx.ST_NO_AUTORESIZE
| wx.ALIGN_RIGHT)
# Add the Element to the Row Sizer
r1Sizer.Add(self.lblPercent, 1, wx.ALIGN_RIGHT)
# Add the Row Sizer to the Main Sizer
mainSizer.Add(r1Sizer, 0,
wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Create a Row Sizer
r2Sizer = wx.BoxSizer(wx.HORIZONTAL)
# Elapsed Time label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Elapsed Time: %d:%02d:%02d"), 'utf8')
else:
prompt = _("Elapsed Time: %d:%02d:%02d")
self.lblElapsedTime = wx.StaticText(self,
-1,
prompt % (0, 0, 0),
style=wx.ST_NO_AUTORESIZE)
# Add the element to the Row Sizer
r2Sizer.Add(self.lblElapsedTime, 0)
# Add a spacer
r2Sizer.Add((1, 0), 1, wx.EXPAND)
# Remaining Time label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Time Remaining: %d:%02d:%02d"), 'utf8')
else:
prompt = _("Time Remaining: %d:%02d:%02d")
self.lblTimeRemaining = wx.StaticText(self,
-1,
prompt % (0, 0, 0),
style=wx.ST_NO_AUTORESIZE
| wx.ALIGN_RIGHT)
# Add the element to the Row Sizer
r2Sizer.Add(self.lblTimeRemaining, 0)
# Add the Row Sizer to the Main Sizer
mainSizer.Add(r2Sizer, 0,
wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Transfer Speed label
if 'unicode' in wx.PlatformInfo:
# Encode with UTF-8 rather than TransanaGlobal.encoding because this is a prompt, not DB Data.
prompt = unicode(_("Transfer Speed: %d k/sec"), 'utf8')
else:
prompt = _("Transfer Speed: %d k/sec")
self.lblTransferSpeed = wx.StaticText(self,
-1,
prompt % 0,
style=wx.ST_NO_AUTORESIZE)
# Add the element to the Main Sizer
mainSizer.Add(self.lblTransferSpeed, 0,
wx.EXPAND | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
# Cancel Button
self.btnCancel = wx.Button(self, wx.ID_CANCEL,
_("Cancel Remaining Files"))
# Add the element to the Main Sizer
mainSizer.Add(self.btnCancel, 0,
wx.ALIGN_CENTER | wx.LEFT | wx.RIGHT | wx.BOTTOM, 10)
wx.EVT_BUTTON(self, wx.ID_CANCEL, self.OnCancel)
# Attach the main sizer to the form
self.SetSizer(mainSizer)
# Turn Auto Layout on
self.SetAutoLayout(True)
# Lay out the form
self.Layout()
# Center on the Screen
TransanaGlobal.CenterOnPrimary(self)
# Initialize variables used in file transfer
BytesRead = 0
# "cancelled" is intialized to false. If the user cancels the file transfer,
# this variable gets set to true to signal the need to interrupt the transfer.
self.cancelled = False
# Note the starting time of the transfer for progress reporting purposes
self.StartTime = time.time()
self.Bind(wx.EVT_TIMER, self.UpdateDisplay)
EVT_THREAD_COMPLETE(self, self.OnFileCopyComplete)
# Create a timer used to update the Progress Dialog
self.timer = wx.Timer(self)
# Start the timer, firing it every half second
self.timer.Start(500)
self.size1 = os.stat(copyFrom)[6]
self.threadedFileCopy = ThreadedFileCopy(self, copyFrom, copyTo)
# Show the form
self.ShowModal()
def __init__(self, parent, id, title):
wx.SetDefaultPyEncoding("utf8")
self.presLan_en = gettext.translation("Transana", "locale", languages=["en"])
self.presLan_en.install()
lang = wx.LANGUAGE_ENGLISH
self.locale = wx.Locale(lang)
self.locale.AddCatalog("Transana")
# Define the Configuration Data
TransanaGlobal.configData = ConfigData.ConfigData()
# Create the global transana graphics colors, once the ConfigData object exists.
TransanaGlobal.transana_graphicsColorList = TransanaGlobal.getColorDefs(
TransanaGlobal.configData.colorConfigFilename
)
# Set essential global color manipulation data structures once the ConfigData object exists.
(
TransanaGlobal.transana_colorNameList,
TransanaGlobal.transana_colorLookup,
TransanaGlobal.keywordMapColourSet,
) = TransanaGlobal.SetColorVariables()
TransanaGlobal.configData.videoPath = "C:\\Users\\DavidWoods\\Videos"
TransanaGlobal.menuWindow = MenuWindow.MenuWindow(None, -1, title)
self.ControlObject = ControlObjectClass.ControlObject()
self.ControlObject.Register(Menu=TransanaGlobal.menuWindow)
TransanaGlobal.menuWindow.Register(ControlObject=self.ControlObject)
wx.Frame.__init__(
self, parent, -1, title, size=(800, 600), style=wx.DEFAULT_FRAME_STYLE | wx.NO_FULL_REPAINT_ON_RESIZE
)
self.testsRun = 0
self.testsSuccessful = 0
self.testsFailed = 0
mainSizer = wx.BoxSizer(wx.VERTICAL)
self.txtCtrl = wx.TextCtrl(self, -1, "Unit Test: SSL\n\n", style=wx.TE_LEFT | wx.TE_MULTILINE)
self.txtCtrl.AppendText(
"Transana Version: %s\nsingleUserVersion: %s\n"
% (TransanaConstants.versionNumber, TransanaConstants.singleUserVersion)
)
mainSizer.Add(self.txtCtrl, 1, wx.EXPAND | wx.ALL, 5)
self.SetSizer(mainSizer)
self.SetAutoLayout(True)
self.Layout()
self.CenterOnScreen()
# Status Bar
self.CreateStatusBar()
self.SetStatusText("")
self.Show(True)
try:
self.RunTests()
except:
print
print
print sys.exc_info()[0]
print sys.exc_info()[1]
traceback.print_exc(file=sys.stdout)
if TransanaConstants.DBInstalled in ["MySQLdb-embedded"]:
DBInterface.EndSingleUserDatabase()
TransanaGlobal.menuWindow.Destroy()
