def AssembleIO():
    #--------------------------------------------------------------
    # Reduce the event loop spam a bit
    #--------------------------------------------------------------
    if os.path.exists("%s/athfile-cache.ascii.gz" % (os.getcwd())):
        print "Old athfile-cache found. Will delete it otherwise athena just freaks out. This little boy"
        os.system("rm %s/athfile-cache.ascii.gz" % (os.getcwd()))
    from GaudiSvc.GaudiSvcConf import THistSvc
    from AthenaCommon.JobProperties import jobproperties
    import AthenaPoolCnvSvc.ReadAthenaPool
    from AthenaCommon.AthenaCommonFlags import athenaCommonFlags as acf
    from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
    from AthenaCommon.AppMgr import ServiceMgr
    from RecExConfig import AutoConfiguration
    from PathResolver import PathResolver
    from XAMPPbase.Utils import ReadListFromFile
    ServiceMgr += AthenaEventLoopMgr(EventPrintoutInterval=5000)

    ServiceMgr += THistSvc()
    OutFileName = "AnalysisOutput.root" if not "outFile" in globals(
    ) else outFile
    ServiceMgr.THistSvc.Output += [
        "XAMPP DATAFILE='{}' OPT='RECREATE'".format(OutFileName)
    ]
    ROOTFiles = []

    if "inputFile" in globals():
        print "Use the following %s as input" % (inputFile)
        ROOTFiles = []
        ResolvedInFile = PathResolver.FindCalibFile(inputFile)
        ReolvedInDir = PathResolver.FindCalibDirectory(inputFile)
        if os.path.isfile(ResolvedInFile):
            if IsTextFile(ResolvedInFile):
                ROOTFiles = ReadListFromFile(ResolvedInFile)
            else:
                ROOTFiles.append(ResolvedInFile)

        elif os.path.isdir(ReolvedInDir):
            for DirEnt in os.listdir(ReolvedInDir):
                if DirEnt.endswith(".root"):
                    ROOTFiles.append(DirEnt)
        else:
            raise RuntimeError("Invalid input " + inputFile)
        if len(ROOTFiles) == 0:
            raise RuntimeError("No ROOT files could be loaded as input")
        ServiceMgr.EventSelector.InputCollections = ROOTFiles
        acf.FilesInput = ROOTFiles

    if len(ROOTFiles) > 0: AutoConfiguration.ConfigureSimulationOrRealData()
    if "nevents" in globals():
        print "Only run on %i events" % (int(nevents))
        theApp.EvtMax = int(nevents)
    if "nskip" in globals():
        print "Skip the first %i events" % (int(nskip))
        ServiceMgr.EventSelector.SkipEvents = int(nksip)
    if isData(): print "INFO: We're running over data today"
    elif isAF2():
        print "INFO: Please fasten your seatbelt the journey will be on Atlas fast "
예제 #2
0
def AssembleIO(stream="TRIGGERSFTESTER"):
    #--------------------------------------------------------------
    # Reduce the event loop spam a bit
    #--------------------------------------------------------------
    if os.path.exists("%s/athfile-cache.ascii.gz" % (os.getcwd())):
        print(
            "INFO: Old athfile-cache found. Will delete it otherwise athena just freaks out. This little boy"
        )
        os.system("rm %s/athfile-cache.ascii.gz" % (os.getcwd()))
    from GaudiSvc.GaudiSvcConf import THistSvc
    from AthenaCommon.JobProperties import jobproperties
    import AthenaPoolCnvSvc.ReadAthenaPool
    from AthenaCommon.AthenaCommonFlags import athenaCommonFlags as acf
    from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
    from AthenaCommon.AppMgr import ServiceMgr
    from PathResolver import PathResolver
    ServiceMgr += AthenaEventLoopMgr(EventPrintoutInterval=5000)

    ServiceMgr += THistSvc()
    OutFileName = "SFTest.root" if not "outFile" in globals() else outFile
    ServiceMgr.THistSvc.Output += [
        "%s DATAFILE='%s' OPT='RECREATE'" % (stream, OutFileName)
    ]
    ROOTFiles = []

    if "inputFile" in globals():
        print("Use the following %s as input" % (inputFile))
        ROOTFiles = []
        ResolvedInFile = PathResolver.FindCalibFile(inputFile)
        ReolvedInDir = PathResolver.FindCalibDirectory(inputFile)
        if os.path.isfile(ResolvedInFile):
            print("INFO: Found file %s" % (inputFile))
            ROOTFiles.append(ResolvedInFile)

        elif os.path.isdir(ReolvedInDir):
            for DirEnt in os.listdir(ReolvedInDir):
                if DirEnt.rfind(".root") != -1:
                    if DirEnt.find(ReolvedInDir) != -1:
                        ROOTFiles.append(DirEnt)
                    else:
                        ROOTFiles.append("%s/%s" % (ReolvedInDir, DirEnt))
        else:
            raise RuntimeError("Invalid input " + inputFile)
        if len(ROOTFiles) == 0:
            raise RuntimeError("No ROOT files could be loaded as input")
        ServiceMgr.EventSelector.InputCollections = ROOTFiles
        acf.FilesInput = ROOTFiles

    if "nevents" in globals():
        print("Only run on %i events" % (int(nevents)))
        theApp.EvtMax = int(nevents)
    if "nskip" in globals():
        print("Skip the first %i events" % (int(nskip)))
        ServiceMgr.EventSelector.SkipEvents = int(nksip)
def AssembleIO(access_mode=0):

    athArgs = getAthenaArgs()

    #--------------------------------------------------------------
    # Reduce the event loop spam a bit
    #--------------------------------------------------------------
    from AthenaCommon.Logging import logging
    recoLog = logging.getLogger('XAMPP I/O')
    recoLog.info('****************** STARTING the job *****************')

    if os.path.exists("%s/athfile-cache.ascii.gz" % (os.getcwd())):
        recoLog.info("Old athfile-cache found. Will delete it otherwise athena just freaks out. This little boy.")
        os.system("rm %s/athfile-cache.ascii.gz" % (os.getcwd()))
    from GaudiSvc.GaudiSvcConf import THistSvc
    from AthenaCommon.JobProperties import jobproperties

    import AthenaRootComps.ReadAthenaxAODHybrid
    svcMgr.EventSelector.AccessMode = access_mode
    ###     https://gitlab.cern.ch/atlas/athena/blob/21.2/PhysicsAnalysis/POOLRootAccess/POOLRootAccess/TEvent.h
    ###     Infromation taken from here...
    recoLog.info("Set the access mode to %d. The access mode determines how athena reads out the xAOD." % (access_mode))
    recoLog.info("Thereby the numbering scheme is as follows")
    recoLog.info(
        "  -2 = kTreeAccess (direct access), -1 = kPoolAccess (horrible slow), 0 = kBranchAccess, 1 = kClassAccess(please try in case of problems)."
    )

    from AthenaCommon.AthenaCommonFlags import athenaCommonFlags as acf
    from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
    from AthenaCommon.AppMgr import ServiceMgr
    from ClusterSubmission.Utils import ReadListFromFile, ResolvePath, IsROOTFile
    from XAMPPbase.Utils import IsTextFile
    ServiceMgr += AthenaEventLoopMgr(EventPrintoutInterval=1000000)
    ServiceMgr += THistSvc()

    ServiceMgr.THistSvc.Output += ["XAMPP DATAFILE='{}' OPT='RECREATE'".format(athArgs.outFile)]
    recoLog.info("Will save the job's output to " + athArgs.outFile)

    if isData(): recoLog.info("We're running over data today")
    elif isAF2():
        recoLog.info("Please fasten your seatbelt the journey will be on Atlas fast ")
    else:
        recoLog.info("Fullsimulation. Make sure that you wear your augmented reality glasses")
예제 #4
0
def setupCostExtras(config=''):

    log = logging.getLogger('setupCostExtras')

    from AthenaCommon.AppMgr import theApp
    from AthenaCommon.AppMgr import ServiceMgr as svcMgr

    if not hasattr(svcMgr, "AthenaEventLoopMgr"):
        from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
        svcMgr += AthenaEventLoopMgr()

    svcMgr.AthenaEventLoopMgr.EventPrintoutInterval = 100
    log.info('Set AthenaEventLoopMgr.EventPrintoutInterval = 100')

    if not hasattr(svcMgr, "AtRndmGenSvc"):
        from AthenaServices.AthenaServicesConf import AtRndmGenSvc
        svcMgr += AtRndmGenSvc()

    svcMgr.AtRndmGenSvc.OutputLevel = 4
    log.info('Set AtRndmGenSvc.OutputLevel = 4')

    if not hasattr(svcMgr, "AtRanluxGenSvc"):
        from AthenaServices.AthenaServicesConf import AtRanluxGenSvc
        svcMgr += AtRanluxGenSvc()

    svcMgr.AtRanluxGenSvc.OutputLevel = 4
    log.info('Set AtRanluxGenSvc.OutputLevel = 4')

    if config.count('TIME') > 0:
        log.info('Configure TrigTimerSvc...')
        from TrigTimeAlgs.TrigTimeAlgsConf import TrigTimerSvc

        if not hasattr(svcMgr, 'TrigTimerSvc'):
            svcMgr += TrigTimerSvc()

        svcMgr.TrigTimerSvc.IncludeName = ".+"
        svcMgr.TrigTimerSvc.ExcludeName = "()"
        svcMgr.TrigTimerSvc.OutputLevel = 4

        log.info('Setup detailed timing:')
        print svcMgr.TrigTimerSvc
예제 #5
0
        "TTREE DATAFILE='" + runArgs.outputNTUP_LARNOISEFile +
        "' OPT='RECREATE'"
    ]

if hasattr(runArgs, "outputNTUP_HECNOISEFile"):
    from LArCafJobs.LArCafJobsConf import LArHECNoise
    topSequence += LArHECNoise('LArHECNoise')
    svcMgr.THistSvc.Output += [
        "HEC DATAFILE='" + runArgs.outputNTUP_HECNOISEFile + "' OPT='RECREATE'"
    ]
    #little hack while autoConfiguration=everything is still not the default...
    if hasattr(runArgs, "inputESDFile") and not hasattr(runArgs, "inputFile"):
        athenaCommonFlags.FilesInput.set_Value_and_Lock(runArgs.inputESDFile)

from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
svcMgr += AthenaEventLoopMgr()
svcMgr.AthenaEventLoopMgr.EventPrintoutInterval = 100

theAuditorSvc = svcMgr.AuditorSvc
theAuditorSvc.Auditors += ["ChronoAuditor"]

#svcMgr.ChronoStatSvc.ChronoDestinationCout = True

svcMgr.ChronoStatSvc.PrintUserTime = True
svcMgr.ChronoStatSvc.PrintSystemTime = True
svcMgr.ChronoStatSvc.PrintEllapsedTime = True
#svcMgr.ChronoStatSvc.NumberOfSkippedEventsForMemStat = 1

#svcMgr.ChronoStatSvc.AsciiStatsOutputFile = "chronoStats.ascii"

#svcMgr.AthenaPoolCnvSvc.UseDetailChronoStat = True
예제 #6
0
def AssembleIO():
    #--------------------------------------------------------------
    # Reduce the event loop spam a bit
    #--------------------------------------------------------------
    from AthenaCommon.Logging import logging
    recoLog = logging.getLogger('MuonAnalysis I/O')
    recoLog.info('****************** STARTING the job *****************')

    if os.path.exists("%s/athfile-cache.ascii.gz" % (os.getcwd())):
        recoLog.info(
            "Old athfile-cache found. Will delete it otherwise athena just freaks out. This little boy."
        )
        os.system("rm %s/athfile-cache.ascii.gz" % (os.getcwd()))
    from GaudiSvc.GaudiSvcConf import THistSvc
    from AthenaCommon.JobProperties import jobproperties
    import AthenaPoolCnvSvc.ReadAthenaPool
    from AthenaCommon.AthenaCommonFlags import athenaCommonFlags as acf
    from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
    from AthenaCommon.AppMgr import ServiceMgr
    from ClusterSubmission.Utils import ReadListFromFile, ResolvePath, IsROOTFile
    from MuonAnalysis.Utils import IsTextFile
    ServiceMgr += AthenaEventLoopMgr(EventPrintoutInterval=1000000)

    ServiceMgr += THistSvc()
    OutFileName = "AnalysisOutput.root" if not "outFile" in globals(
    ) else outFile
    ServiceMgr.THistSvc.Output += [
        "MuonAnalysis DATAFILE='{}' OPT='RECREATE'".format(OutFileName)
    ]
    recoLog.info("Will save the job's output to " + OutFileName)
    ROOTFiles = []

    if "inputFile" in globals():
        recoLog.info("Use the following %s as input" % (inputFile))
        ROOTFiles = []
        ResolvedInFile = ResolvePath(inputFile)

        if inputFile.startswith('root://'):
            ROOTFiles.append(inputFile)

        elif ResolvedInFile and os.path.isfile(ResolvedInFile):
            if IsTextFile(ResolvedInFile):
                ROOTFiles = ReadListFromFile(ResolvedInFile)
            else:
                ROOTFiles.append(ResolvedInFile)

        elif ResolvedInFile and os.path.isdir(ResolvedInFile):
            for DirEnt in os.listdir(ResolvedInFile):
                if IsROOTFile(DirEnt):
                    if DirEnt.find(ResolvedInFile) != -1:
                        ROOTFiles.append(DirEnt)
                    else:
                        ROOTFiles.append("%s/%s" % (ResolvedInFile, DirEnt))
        else:
            raise RuntimeError("Invalid input " + inputFile)
        if len(ROOTFiles) == 0:
            raise RuntimeError("No ROOT files could be loaded as input")
        ServiceMgr.EventSelector.InputCollections = ROOTFiles
        acf.FilesInput = ROOTFiles

    if "nevents" in globals():
        recoLog.info("Only run on %i events" % (int(nevents)))
        theApp.EvtMax = int(nevents)
    if "nskip" in globals():
        recoLog.info("Skip the first %i events" % (int(nskip)))
        ServiceMgr.EventSelector.SkipEvents = int(nskip)
    """if isData(): recoLog.info("We're running over data today")
예제 #7
0
#------------------------------------------------------------------------------
from AthenaCommon.AppMgr import ServiceMgr
import AthenaPoolCnvSvc.ReadAthenaPool

ServiceMgr.EventSelector.InputCollections = inputFiles
print ServiceMgr.EventSelector.InputCollections

if 'EvtMax' in dir():
    theApp.EvtMax = EvtMax
else:
    theApp.EvtMax = -1

#------------------------------------------------------------------------------
if not hasattr(ServiceMgr, 'AthenaEventLoopMg'):
    from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
    ServiceMgr += AthenaEventLoopMgr(EventPrintoutInterval = 100)

if 'dumpSG' in dir():
    StoreGateSvc = Service('StoreGateSvc')
    StoreGateSvc.Dump = dumpSG

#------------------------------------------------------------------------------
muon_sf  = CfgMgr.CP__MuonTriggerScaleFactors('muonTrigSFs', OutputLevel = INFO)

#muon_sf.filename = "/pc2012-data2/rustem/testarea/AtlasMuon/PhysicsAnalysis/MuonID/MuonIDAnalysis/MuonEfficiencyCorrections/share/muon_trigger_eff_jun30.root"

ToolSvc += muon_sf

#------------------------------------------------------------------------------
def getTestMuon(input_name):
# If not defined the defaults given above are used
for var in loadInDetRec_Options:
    if var in dir():
        loadInDetRec_Options[var] = eval(var)

print "Starting loadInDet_Rec"

#--------------------------------------------------------------
# Import config
#--------------------------------------------------------------
from AthenaCommon.AthenaCommonFlags import athenaCommonFlags
from RecExConfig.RecFlags import rec
from RecExConfig.RecAlgsFlags import recAlgs

from AthenaServices.AthenaServicesConf import AthenaEventLoopMgr
ServiceMgr += AthenaEventLoopMgr()
ServiceMgr.AthenaEventLoopMgr.EventPrintoutInterval = 100

#--------------------------------------------------------------------------------
#Setup jobProperties  - Override Autoconfiguration of the BField. Needed for MC BOFF-
#--------------------------------------------------------------------------------
from AthenaCommon.BeamFlags import jobproperties
from AthenaCommon.BFieldFlags import jobproperties
if not loadInDetRec_Options["realData"] and loadInDetRec_Options[
        "Cosmics"]:  # and not loadInDetRec_Options["BField"] PF: I think this causes the wrong setup in Cosmics MC
    print "INFO::Setting Up Manually for MC Cosmics"
    jobproperties.Beam.numberOfCollisions.set_Value_and_Lock(0.0)
    jobproperties.Beam.beamType.set_Value_and_Lock("cosmics")
    jobproperties.BField.solenoidOn.set_Value_and_Lock(
        loadInDetRec_Options["BField"])
    jobproperties.BField.barrelToroidOn.set_Value_and_Lock(
예제 #9
0
class WasteTimeAlg(PyAlgorithm):
    def execute(self):
        printfunc("waste some time")
        for i in range(200000):
            foo = i * i / (i + 1) / (i + 2)
        return 1


waste = WasteTimeAlg()
import ROOT
ROOT.SetOwnership(waste, 0)

include("AthenaServices/SimplePOSIXTimeKeeperOptions.py")

from AthenaCommon.AlgSequence import AlgSequence
from AthenaCommon.Configurable import ConfigurablePyAlgorithm
top = AlgSequence()
top += ConfigurablePyAlgorithm('WasteTimeAlg')

from AthenaCommon.AppMgr import ServiceMgr
from AthenaServices.AthenaServicesConf import SimplePOSIXTimeKeeperSvc, AthenaEventLoopMgr

ServiceMgr += SimplePOSIXTimeKeeperSvc()
ServiceMgr.SimplePOSIXTimeKeeperSvc.OutputLevel = 1
ServiceMgr.SimplePOSIXTimeKeeperSvc.AllocTime = 6

ServiceMgr += AthenaEventLoopMgr(TimeKeeper="SimplePOSIXTimeKeeperSvc")

#from GaudiSvc.GaudiSvcConf import MessageSvc
#ServiceMgr.MessageSvc.OutputLevel = 2