def __init__(self):
super(mainWindow,
self).__init__(None, title='Cura - ' + version.getVersion())
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
# TODO: wxWidgets 2.9.4 has a bug when NSView does not register for dragged types when wx drop target is set. It was fixed in 2.9.5
if sys.platform.startswith('darwin'):
try:
import objc
nswindow = objc.objc_object(
c_void_p=self.MacGetTopLevelWindowRef())
view = nswindow.contentView()
view.registerForDraggedTypes_([u'NSFilenamesPboardType'])
except:
pass
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="Cura",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [
wx.NewId() for line in xrange(10)
]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [
wx.NewId() for line in xrange(10)
]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Reload platform\tF5"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.reloadScene(e), i)
i = self.fileMenu.Append(-1, _("Clear platform"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnPrintButton(1), i)
i = self.fileMenu.Append(-1, _("Save GCode..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showEngineLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Open Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Reset Profile to default"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"),
modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnModelMRU,
id=self.ID_MRU_MODEL1,
id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"),
profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnProfileMRU,
id=self.ID_MRU_PROFILE1,
id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, '&' + _("File"))
toolsMenu = wx.Menu()
#i = toolsMenu.Append(-1, 'Batch run...')
#self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
#self.normalModeOnlyItems.append(i)
if minecraftImport.hasMinecraft():
i = toolsMenu.Append(-1, _("Minecraft map import..."))
self.Bind(wx.EVT_MENU, self.OnMinecraftImport, i)
if version.isDevVersion():
i = toolsMenu.Append(-1, _("PID Debugger..."))
self.Bind(wx.EVT_MENU, self.OnPIDDebugger, i)
i = toolsMenu.Append(-1, _("Copy profile to clipboard"))
self.Bind(wx.EVT_MENU, self.onCopyProfileClipboard, i)
toolsMenu.AppendSeparator()
self.allAtOnceItem = toolsMenu.Append(-1,
_("Print all at once"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.allAtOnceItem)
self.oneAtATime = toolsMenu.Append(-1,
_("Print one at a time"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.oneAtATime)
if profile.getPreference('oneAtATime') == 'True':
self.oneAtATime.Check(True)
else:
self.allAtOnceItem.Check(True)
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
expertMenu = wx.Menu()
i = expertMenu.Append(-1,
_("Switch to quickprint..."),
kind=wx.ITEM_RADIO)
self.switchToQuickprintMenuItem = i
self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
i = expertMenu.Append(-1,
_("Switch to full settings..."),
kind=wx.ITEM_RADIO)
self.switchToNormalMenuItem = i
self.Bind(wx.EVT_MENU, self.OnNormalSwitch, i)
expertMenu.AppendSeparator()
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
expertMenu.AppendSeparator()
i = expertMenu.Append(-1, _("Run first run wizard..."))
self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
self.bedLevelWizardMenuItem = expertMenu.Append(
-1, _("Run bed leveling wizard..."))
self.Bind(wx.EVT_MENU, self.OnBedLevelWizard,
self.bedLevelWizardMenuItem)
self.headOffsetWizardMenuItem = expertMenu.Append(
-1, _("Run head offset wizard..."))
self.Bind(wx.EVT_MENU, self.OnHeadOffsetWizard,
self.headOffsetWizardMenuItem)
self.menubar.Append(expertMenu, _("Expert"))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(wx.EVT_MENU,
lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(
wx.EVT_MENU,
lambda e: webbrowser.open('https://github.com/daid/Cura/issues'),
i)
i = helpMenu.Append(-1, _("Check for update..."))
self.Bind(wx.EVT_MENU, self.OnCheckForUpdate, i)
if profile.getPreference('use_youmagine') == 'True':
i = helpMenu.Append(-1, _("Open YouMagine website..."))
self.Bind(wx.EVT_MENU,
lambda e: webbrowser.open('https://www.youmagine.com/'),
i)
i = helpMenu.Append(-1, _("About Cura..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self,
style=wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
##Gui components##
self.simpleSettingsPanel = simpleMode.simpleModePanel(
self.leftPane, lambda: self.scene.sceneUpdated())
self.normalSettingsPanel = normalSettingsPanel(
self.leftPane, lambda: self.scene.sceneUpdated())
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.simpleSettingsPanel, 1)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(
self.normalSettingsPanel.GetBackgroundColour())
self.simpleSettingsPanel.Show(False)
self.normalSettingsPanel.Show(False)
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth() / 2,
wx.Display().GetClientArea().GetHeight() / 2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx, posy))
if width > 0 and height > 0:
self.SetSize((width, height))
self.normalSashPos = int(
profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane,
self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint(
(self.GetPositionTuple()[0] + self.GetSizeTuple()[1],
self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800, 600))
self.Centre()
self.updateSliceMode()
self.scene.SetFocus()
def __init__(self):
super(mainWindow, self).__init__(None,
title='Cura-BCN3D-' +
version.getVersion() + '-beta2')
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
# TODO: wxWidgets 2.9.4 has a bug when NSView does not register for dragged types when wx drop target is set. It was fixed in 2.9.5
if sys.platform.startswith('darwin'):
try:
import objc
nswindow = objc.objc_object(
c_void_p=self.MacGetTopLevelWindowRef())
view = nswindow.contentView()
view.registerForDraggedTypes_([u'NSFilenamesPboardType'])
except:
pass
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="Cura",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [
wx.NewId() for line in xrange(10)
]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [
wx.NewId() for line in xrange(10)
]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
#Now we create the different menu options, the first one is the options displayed by the 'File' button
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Load Draudi file...\tCTRL+D"))
self.Bind(wx.EVT_MENU, self.OnLoadDraudiModel, i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Reload platform\tF5"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.reloadScene(e), i)
i = self.fileMenu.Append(-1, _("Clear platform\tCTRL+Q"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnPrintButton(1), i)
i = self.fileMenu.Append(-1, _("Save GCode...\tCTRL+G"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showEngineLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Open Profile...\tCTRL+C"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnLoadConfigurations(), i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
if version.isDevVersion():
i = self.fileMenu.Append(-1, "Save difference from default...")
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveDifferences, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"),
modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnModelMRU,
id=self.ID_MRU_MODEL1,
id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"),
profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnProfileMRU,
id=self.ID_MRU_PROFILE1,
id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
#Here we set the name of the menubar, which in this case is 'File'
self.menubar.Append(self.fileMenu, '&' + _("File"))
#The next menu option is 'Tools'
toolsMenu = wx.Menu()
#At BCN3D we do not recommend printing one at a time and we have set a message to come up
#in case a user does choose that option.
self.allAtOnceItem = toolsMenu.Append(-1,
_("Print all at once"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.allAtOnceItem)
self.oneAtATime = toolsMenu.Append(-1,
_("Print one at a time"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.oneAtATime)
if profile.getPreference('oneAtATime') == 'True':
self.oneAtATime.Check(True)
else:
self.allAtOnceItem.Check(True)
#We name this menu option
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
#we switch between panels
expertMenu = wx.Menu()
i = expertMenu.Append(-1,
_("Switch to quickprint..."),
kind=wx.ITEM_RADIO)
self.switchToQuickprintMenuItem = i
self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
i = expertMenu.Append(-1,
_("Switch to full settings..."),
kind=wx.ITEM_RADIO)
self.switchToNormalMenuItem = i
self.Bind(wx.EVT_MENU, self.OnNormalSwitch, i)
expertMenu.AppendSeparator()
#Open a series of settings that you are not normally able to see
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
expertMenu.AppendSeparator()
self.bedLevelWizardMenuItem = expertMenu.Append(
-1, _("Run bed leveling wizard..."))
self.Bind(wx.EVT_MENU, self.OnBedLevelWizard,
self.bedLevelWizardMenuItem)
self.headOffsetWizardMenuItem = expertMenu.Append(
-1, _("Run head offset wizard..."))
self.Bind(wx.EVT_MENU, self.OnHeadOffsetWizard,
self.headOffsetWizardMenuItem)
#give the menu bar a name, in this case 'Expert'
self.menubar.Append(expertMenu, _("Expert"))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(
wx.EVT_MENU, lambda e: webbrowser.open(
'http://www.bcn3dtechnologies.com/es/forum'), i)
if sys.platform.startswith('win'):
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(
wx.EVT_MENU, lambda e: webbrowser.open(
'https://github.com/BCN3D/BCN3D-Cura-Windows/issues'), i)
elif sys.platform.startswith('darwin'):
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(
wx.EVT_MENU, lambda e: webbrowser.open(
'https://github.com/BCN3D/BCN3D-Cura-Mac/issues'), i)
i = helpMenu.Append(-1, _("Check for update..."))
self.Bind(wx.EVT_MENU, self.OnCheckForUpdate, i)
i = helpMenu.Append(-1, _("About Cura..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self,
style=wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
##Gui components##
#We want two different simple modes, one for BCN3D users and the default cura one for other machines
#Currently working on this, will be available soon
#machine_type = profile.getMachineSetting('machine_type')
#if machine_type == 'BCN3DSigma':
# self.simpleSettingsPanel = simpleModeSigma(self.leftPane, self.scene.sceneUpdated)
#else:
#call to the different panels
self.simpleSettingsPanel = simpleMode.simpleModePanel(
self.leftPane, self.scene.sceneUpdated)
self.normalSettingsPanel = normalSettingsPanel(self.leftPane,
self.scene.sceneUpdated)
#Simple panel will be fix while you can change the size for advanced panel
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.simpleSettingsPanel, 1)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(
self.normalSettingsPanel.GetBackgroundColour())
self.simpleSettingsPanel.Show(False)
self.normalSettingsPanel.Show(False)
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth() / 2,
wx.Display().GetClientArea().GetHeight() / 2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
#self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx, posy))
if width > 0 and height > 0:
self.SetSize((width, height))
self.normalSashPos = int(
profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane,
self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint(
(self.GetPositionTuple()[0] + self.GetSizeTuple()[1],
self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800, 600))
self.Centre()
self.updateSliceMode()
self.scene.SetFocus()
self.dialogframe = None
if Publisher is not None:
Publisher().subscribe(self.onPluginUpdate, "pluginupdate")
pluginCount = self.normalSettingsPanel.pluginPanel.GetActivePluginCount(
)
if pluginCount == 1:
self.scene.notification.message(
"Warning: 1 plugin from the previous session is still active.")
if pluginCount > 1:
self.scene.notification.message(
"Warning: %i plugins from the previous session are still active."
% pluginCount)
def __init__(self):
super(mainWindow, self).__init__(None, title='migbot ' )
self.extruderCount = int(profile.getPreference('extruder_amount'))
if profile.getPreference('language') is not None:
language.switchTo(profile.getPreference('language'))
wx.EVT_CLOSE(self, self.OnClose)
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.loadSupportedExtensions()))
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="migbot",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [wx.NewId() for line in xrange(10)]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [wx.NewId() for line in xrange(10)]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, language.getText('Load model file...\tCTRL+L'))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, language.getText('Save model...\tCTRL+S'))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, language.getText('Clear platform'))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, language.getText('Print...\tCTRL+P'))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showPrintWindow(), i)
i = self.fileMenu.Append(-1, language.getText('Save GCode...'))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, language.getText('Show slice engine log...'))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showSliceLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, language.getText('Open Profile...'))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, language.getText('Save Profile...'))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
i = self.fileMenu.Append(-1, language.getText('Load Profile from GCode...'))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, language.getText('Reset Profile to default'))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, language.getText('Preferences...\tCTRL+,'))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, language.getText('Language...'))
self.Bind(wx.EVT_MENU, self.OnLanguage, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), language.getText("&Recent Model Files"), modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnModelMRU, id=self.ID_MRU_MODEL1, id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), language.getText("&Recent Profile Files"), profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnProfileMRU, id=self.ID_MRU_PROFILE1, id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, language.getText('Quit'))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, language.getText('&File'))
toolsMenu = wx.Menu()
i = toolsMenu.Append(-1, language.getText('Switch to quickprint...'))
self.switchToQuickprintMenuItem = i
self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
i = toolsMenu.Append(-1, language.getText('Switch to full settings...'))
self.switchToNormalMenuItem = i
self.Bind(wx.EVT_MENU, self.OnNormalSwitch, i)
toolsMenu.AppendSeparator()
#i = toolsMenu.Append(-1, 'Batch run...')
#self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
#self.normalModeOnlyItems.append(i)
if minecraftImport.hasMinecraft():
i = toolsMenu.Append(-1, language.getText('Minecraft import...'))
self.Bind(wx.EVT_MENU, self.OnMinecraftImport, i)
self.menubar.Append(toolsMenu, language.getText('Tools'))
expertMenu = wx.Menu()
i = expertMenu.Append(-1, language.getText('Open expert settings...'))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
expertMenu.AppendSeparator()
if firmwareInstall.getDefaultFirmware() is not None:
i = expertMenu.Append(-1, language.getText('Install default Marlin firmware'))
self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
i = expertMenu.Append(-1, language.getText('Install custom firmware'))
self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
expertMenu.AppendSeparator()
i = expertMenu.Append(-1, language.getText('Run first run wizard...'))
self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
i = expertMenu.Append(-1, language.getText('Run bed leveling wizard...'))
self.Bind(wx.EVT_MENU, self.OnBedLevelWizard, i)
if self.extruderCount > 1:
i = expertMenu.Append(-1, language.getText('Run head offset wizard...'))
self.Bind(wx.EVT_MENU, self.OnHeadOffsetWizard, i)
self.menubar.Append(expertMenu, language.getText('Expert'))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, language.getText('Online documentation...'))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
i = helpMenu.Append(-1, language.getText('Report a problem...'))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
i = helpMenu.Append(-1, language.getText('migbot Documentation...'))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('www.migbot.com'), i)
i = helpMenu.Append(-1, language.getText('Check for update...'))
self.Bind(wx.EVT_MENU, self.OnCheckForUpdate, i)
i = helpMenu.Append(-1, language.getText('About migbot...'))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, language.getText('Help'))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self, style = wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
##Gui components##
self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, lambda : self.scene.sceneUpdated())
self.normalSettingsPanel = normalSettingsPanel(self.leftPane, lambda : self.scene.sceneUpdated())
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.simpleSettingsPanel)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToControls()
self.SetBackgroundColour(self.normalSettingsPanel.GetBackgroundColour())
self.simpleSettingsPanel.Show(False)
self.normalSettingsPanel.Show(False)
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth()/2,wx.Display().GetClientArea().GetHeight()/2))
self.Centre()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx,posy))
if width > 0 and height > 0:
self.SetSize((width,height))
self.normalSashPos = int(profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane, self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint((self.GetPositionTuple()[0] + self.GetSizeTuple()[1], self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800,600))
self.Centre()
self.updateSliceMode()
def __init__(self):
# 软件标题
super(mainWindow, self).__init__(None, title='Tianjin DaGe Technology Co.Ltd')
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
# TODO: wxWidgets 2.9.4 has a bug when NSView does not register for dragged types when wx drop target is set. It was fixed in 2.9.5
if sys.platform.startswith('darwin'):
try:
import objc
nswindow = objc.objc_object(c_void_p=self.MacGetTopLevelWindowRef())
view = nswindow.contentView()
view.registerForDraggedTypes_([u'NSFilenamesPboardType'])
except:
pass
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="Cura",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [wx.NewId() for line in xrange(10)]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [wx.NewId() for line in xrange(10)]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar() # 添加菜单栏
#file的菜单，第一个
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Reload platform\tF5"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.reloadScene(e), i)
i = self.fileMenu.Append(-1, _("Clear platform\tCTRL+D"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator() #分割线
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnPrintButton(1), i)
i = self.fileMenu.Append(-1, _("Save GCode...\tCTRL+G"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showEngineLog(), i)
self.fileMenu.AppendSeparator() #分割线
i = self.fileMenu.Append(-1, _("Open Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
if version.isDevVersion():
i = self.fileMenu.Append(-1, "Save difference from default...")
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveDifferences, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
# self.fileMenu.AppendSeparator()
## Disabled the reset profile option, as it resets to global defaults, not machine defaults.
# i = self.fileMenu.Append(-1, _("Reset Profile to default"))
# self.normalModeOnlyItems.append(i)
# self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator() #分割线
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list 模型历史记录
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"), modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnModelMRU, id=self.ID_MRU_MODEL1, id2=self.ID_MRU_MODEL10)
# Profile MRU list 轮廓历史记录
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"), profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnProfileMRU, id=self.ID_MRU_PROFILE1, id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator() #分割线
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, '&' + _("File"))
# Tools菜单，第二个
toolsMenu = wx.Menu()
#i = toolsMenu.Append(-1, 'Batch run...')
#self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
#self.normalModeOnlyItems.append(i)
# 不懂这两个判断语句的作用
if minecraftImport.hasMinecraft():
i = toolsMenu.Append(-1, _("Minecraft map import..."))
self.Bind(wx.EVT_MENU, self.OnMinecraftImport, i)
if version.isDevVersion():
i = toolsMenu.Append(-1, _("PID Debugger..."))
self.Bind(wx.EVT_MENU, self.OnPIDDebugger, i)
i = toolsMenu.Append(-1, _("Auto Firmware Update..."))
self.Bind(wx.EVT_MENU, self.OnAutoFirmwareUpdate, i)
#i = toolsMenu.Append(-1, _("Copy profile to clipboard"))
#self.Bind(wx.EVT_MENU, self.onCopyProfileClipboard,i)
toolsMenu.AppendSeparator() #分割线
self.allAtOnceItem = toolsMenu.Append(-1, _("Print all at once"), kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.allAtOnceItem)
self.oneAtATime = toolsMenu.Append(-1, _("Print one at a time"), kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.oneAtATime)
if profile.getPreference('oneAtATime') == 'True':
self.oneAtATime.Check(True)
else:
self.allAtOnceItem.Check(True)
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
# 机器配置和工具 机器菜单。第三个
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
# Expert菜单 第四个
expertMenu = wx.Menu()
i = expertMenu.Append(-1, _("Switch to quickprint..."), kind=wx.ITEM_RADIO)
self.switchToQuickprintMenuItem = i
self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
i = expertMenu.Append(-1, _("Switch to full settings..."), kind=wx.ITEM_RADIO)
self.switchToNormalMenuItem = i
self.Bind(wx.EVT_MENU, self.OnNormalSwitch, i)
expertMenu.AppendSeparator()
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
expertMenu.AppendSeparator()
self.bedLevelWizardMenuItem = expertMenu.Append(-1, _("Run bed leveling wizard..."))
self.Bind(wx.EVT_MENU, self.OnBedLevelWizard, self.bedLevelWizardMenuItem)
self.headOffsetWizardMenuItem = expertMenu.Append(-1, _("Run head offset wizard..."))
self.Bind(wx.EVT_MENU, self.OnHeadOffsetWizard, self.headOffsetWizardMenuItem)
self.menubar.Append(expertMenu, _("Expert"))
# help菜单 第五个
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
i = helpMenu.Append(-1, _("Check for update..."))
self.Bind(wx.EVT_MENU, self.OnCheckForUpdate, i)
i = helpMenu.Append(-1, _("Open YouMagine website..."))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://www.youmagine.com/'), i)
i = helpMenu.Append(-1, _("About Software..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
##################################以上5个菜单，全部结束###########################
self.splitter = wx.SplitterWindow(self, style = wx.SP_3D | wx.SP_LIVE_UPDATE) # 将界面划分为两个子界面，一个是3D效果的
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
#Preview window
# 第一次调用该模块
# 该函数还有关于OpenGL的知识，需要学习掌握
self.scene = sceneView.SceneView(self.rightPane) # 将右边的界面传到该函数，实现预览功能
##Gui components##
# 第一次调用simpleMode
# 将左边的界面传入，实现相关的功能
self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, self.scene.sceneUpdated) # 调用simpleMode.py的功能
self.normalSettingsPanel = normalSettingsPanel(self.leftPane, self.scene.sceneUpdated)
# BoxSizer
# Google翻译一个框分级机背后的基本想法是，窗口将最多以相当简单的基本几何形状布置，通常在一排或一列或任几个层次结构。
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.simpleSettingsPanel, 1)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Main sizer, to position the preview window, buttons and tab control
# 主要的大小选择器，定位预览窗口，按钮，标签管理
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
# 主要窗口的大小选择器
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(self.normalSettingsPanel.GetBackgroundColour())
self.simpleSettingsPanel.Show(False)
self.normalSettingsPanel.Show(False)
# Set default window size & position
# 设置默认的窗口大小和坐标
self.SetSize((wx.Display().GetClientArea().GetWidth()/2,wx.Display().GetClientArea().GetHeight()/2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
# Timer 设置，用来检查轮廓图是否在剪贴板上
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
#self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
# 从参数选择文件中，还原窗口位置，大小，状态，
try:
if profile.getPreference('window_maximized') == 'True': # 最大
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx,posy)) # 设置x,y坐标
if width > 0 and height > 0:
self.SetSize((width,height)) # 设置宽，高
self.normalSashPos = int(profile.getPreference('window_normal_sash')) # 设置正常
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane, self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint((self.GetPositionTuple()[0] + self.GetSizeTuple()[1], self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800,600))
self.Centre()
self.updateSliceMode()
self.scene.SetFocus()
self.dialogframe = None
if Publisher is not None:
Publisher().subscribe(self.onPluginUpdate, "pluginupdate")
pluginCount = self.normalSettingsPanel.pluginPanel.GetActivePluginCount()
if pluginCount == 1:
self.scene.notification.message("Warning: 1 plugin from the previous session is still active.")
if pluginCount > 1:
self.scene.notification.message("Warning: %i plugins from the previous session are still active." % pluginCount)