def __init__(self, parent):
super(decideToUpdateSigma, self).__init__(parent, _('Firmware Updater'))
self._port = 'AUTO'
self._baudrate = 250000
if self._port == 'AUTO':
print 'entramos en port auto despues de baudrate'
programmer = stk500v2.Stk500v2()
print 'antes',self._port
if not programmer.isConnected():
print 'not connected'
for self._port in machineCom.serialList(False):
try:
print 'despues',self._port
programmer.connect(self._port)
print 'lo que devuelve', programmer.isConnected()
print self._baudrate
profile.putMachineSetting('serial_port_auto', self._port)
print 'hemos llegado despues del port'
print self._port
#wx.MessageBox('esto es lo que tenemoss',self._port)
programmer.close()
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=1)
print self._serial
profile.putMachineSetting('self_serial', self._serial)
self._state = 'Online'
print 'bueno', self._state
break
except ispBase.IspError as (e):
self._state = 'Offline'
pass
programmer.close()
if self._port not in machineCom.serialList(False):
self._state = 'Offline'
print 'malo',self._state
if self._state == 'Offline':
self.AddText(_('Please connect your printer to the computer.\n\n'
'In case you already had it connected and it was not detected,\n'
'please disconnect and connect again.\n\n'
'Once you have done this, you may press Connect && Upgrade to\n'
'continue with the process.\n\n'
'(Note: this may take a minute)\n'))
connectButton = self.AddButton('Connect && Upgrade')
connectButton.Bind(wx.EVT_BUTTON, self.OnWantToConnect)
self.AddSeperator()
if self._state == 'Online':
self.AddText(_('We have detected a printer, please press Upgrade to continue\n'
'with the process.\n\n'
'(Note: this may take a minute)\n'))
upgradeButton = self.AddButton('Upgrade')
upgradeButton.Bind(wx.EVT_BUTTON, self.OnWantToUpgrade)
self.AddSeperator()
def OnRun(self):
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, "Connecting to machine...")
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
for self.port in machineCom.serialList():
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if programmer.isConnected():
wx.CallAfter(self.updateLabel, "Uploading firmware...")
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, "Done!\nInstalled firmware: %s" % (os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, "Failed to write firmware.\n" + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.MessageBox('Failed to find machine for firmware upgrade\nIs your machine connected to the PC?', 'Firmware update', wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
def OnRun(self):
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(self.updateLabel, _("Please connect the printer to your\ncomputer with a USB cable and power it on."))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
programmer.close()
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
programmer.close()
if not self:
#Window destroyed
return
self.cancelButton.Disable()
self.okButton.SetLabel(_('Ok'))
if not programmer.isConnected():
self.show_connect_dialog = True
wx.CallAfter(self.Close)
return
if self._machine_type == 'ultimaker':
if programmer.hasChecksumFunction():
wx.CallAfter(self.updateLabel, _("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UMO firmware on an UM2 or UMO+?"))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
if self._machine_type == 'ultimaker_plus' or self._machine_type == 'ultimaker2':
if not programmer.hasChecksumFunction():
wx.CallAfter(self.updateLabel, _("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UM2 or UMO+ firmware on an UMO?"))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
self.success = True
wx.CallAfter(self.updateLabel, _("Done!"))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, _("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def OnCustomFirmware(self, e):
dlg=wx.FileDialog(self, "Open firmware to upload", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
if dlg.ShowModal() == wx.ID_OK:
filename = dlg.GetPath()
if not(os.path.exists(filename)):
return
#For some reason my Ubuntu 10.10 crashes here.
self.port in machineCom.serialList(True)
firmwareInstall.InstallFirmware(filename)
def OnRun(self):
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(self.updateLabel, _("Please connect the printer to\nyour computer with the USB cable."))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
programmer.close()
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
programmer.close()
if not programmer.isConnected():
wx.MessageBox(_("Failed to find machine for firmware upgrade\nIs your machine connected to the PC?"),
_("Firmware update"), wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
return
if self._default_firmware:
if self._machine_type == 'BCN3DSigma':
if programmer.hasChecksumFunction():
wx.CallAfter(self.updateLabel, _("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UMO firmware on an UM2 or UMO+?"))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
if self._machine_type == 'ultimaker' or self._machine_type == 'ultimaker2':
if not programmer.hasChecksumFunction():
wx.CallAfter(self.updateLabel, _("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UM2 or UMO+ firmware on an UMO?"))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, _("Done!\nInstalled firmware: %s") % (os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.showError, e)
programmer.close()
wx.CallAfter(self.okButton.Enable)
def getAvailableConnections(self):
if profile.getMachineSetting('serial_port') == 'AUTO':
serialList = machineCom.serialList(True)
else:
serialList = [profile.getMachineSetting('serial_port')]
for port in serialList:
if port not in self._connectionMap:
self._connectionMap[port] = serialConnection(port)
for key in self._connectionMap.keys():
if key not in serialList and not self._connectionMap[key].isActiveConnectionOpen():
self._connectionMap.pop(key)
return self._connectionMap.values()
def OnWantToConnect(self,e):
self._port = 'AUTO'
self._baudrate = 250000
if self._port == 'AUTO':
print 'entramos en port auto despues de baudrate'
programmer = stk500v2.Stk500v2()
print 'antes', self._port
if not programmer.isConnected():
print 'not connected'
for self._port in machineCom.serialList(False):
try:
print 'despues', self._port
programmer.connect(self._port)
print 'lo que devuelve', programmer.isConnected()
print self._baudrate
profile.putMachineSetting('serial_port_auto', self._port)
print 'hemos llegado despues del port'
print self._port
programmer.close()
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=1)
print self._serial
profile.putMachineSetting('self_serial', self._serial)
self._state = 'Online'
print 'bueno', self._state
break
except ispBase.IspError as (e):
self._state = 'Offline'
pass
programmer.close()
if self._port not in machineCom.serialList(False):
self._state = 'Offline'
print 'malo', self._state
if self._state == 'Online':
self._serial.close()
self.readFirstLine()
self.getFirmwareHardware()
def OnRun(self):
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == "AUTO":
wx.CallAfter(self.updateLabel, _("Please connect the printer to\nyour computer with the USB cable."))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
time.sleep(1)
if not self:
# Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if not programmer.isConnected():
wx.MessageBox(
_("Failed to find machine for firmware upgrade\nIs your machine connected to the PC?"),
_("Firmware update"),
wx.OK | wx.ICON_ERROR,
)
wx.CallAfter(self.Close)
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, _("Done!\nInstalled firmware: %s") % (os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, _("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def _monitor(self):
programmer = stk500v2.Stk500v2()
if self._port == 'AUTO':
while not programmer.isConnected():
for self._port in machineCom.serialList(False):
try:
programmer.connect(self._port)
if programmer.isConnected():
return self._serial
except ispBase.IspError:
programmer.close()
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self._port)
except ispBase.IspError:
programmer.close()
def OnInstall(self):
wx.CallAfter(self.okButton.Disable)
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(self.updateLabel, _("Please connect the printer to your\ncomputer with a USB cable and power it on."))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if not programmer.isConnected():
wx.CallAfter(self.updateLabel, _("Failed to connect to programmer.\n"))
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, _("Done!\nInstalled firmware: %s") % (os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, _("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def OnInstall(self):
wx.CallAfter(self.okButton.Disable)
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(self.updateLabel, _("Please connect the printer to\nyour computer with the USB cable."))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if not programmer.isConnected():
wx.CallAfter(self.updateLabel, _("Failed to connect to programmer.\n"))
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, _("Done!\nInstalled firmware: %s") % (os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, _("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def OnRun(self):
wx.CallAfter(self.updateLabel, "Reading firmware...")
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, "Connecting to machine...")
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if programmer.isConnected():
wx.CallAfter(self.updateLabel, "Uploading firmware...")
try:
programmer.programChip(hexFile)
wx.CallAfter(
self.updateLabel, "Done!\nInstalled firmware: %s" %
(os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel,
"Failed to write firmware.\n" + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.MessageBox(
'Failed to find machine for firmware upgrade\nIs your machine connected to the PC?',
'Firmware update', wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
def OnRun(self):
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(
self.updateLabel,
_("Please connect the printer to\nyour computer with the USB cable."
))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
programmer.close()
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
programmer.close()
if not programmer.isConnected():
wx.MessageBox(
_("Failed to find machine for firmware upgrade\nIs your machine connected to the PC?"
), _("Firmware update"), wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
return
if self._machine_type == 'ultimaker':
if programmer.hasChecksumFunction():
wx.CallAfter(
self.updateLabel,
_("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UMO firmware on an UM2 or UMO+?"
))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
if self._machine_type == 'ultimaker_plus' or self._machine_type == 'ultimaker2':
if not programmer.hasChecksumFunction():
wx.CallAfter(
self.updateLabel,
_("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UM2 or UMO+ firmware on an UMO?"
))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
wx.CallAfter(
self.updateLabel,
_("Done!\nInstalled firmware: %s") %
(os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel,
_("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def OnRun(self):
wx.CallAfter(self.updateLabel, _("Reading firmware..."))
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, _("Connecting to machine..."))
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
wx.CallAfter(
self.updateLabel,
_("Please connect the printer to your\ncomputer with a USB cable and power it on."
))
while not programmer.isConnected():
for self.port in machineCom.serialList(True):
try:
programmer.connect(self.port)
break
except ispBase.IspError:
programmer.close()
time.sleep(1)
if not self:
#Window destroyed
return
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
programmer.close()
if not self:
#Window destroyed
return
self.cancelButton.Disable()
self.okButton.SetLabel(_('Ok'))
if not programmer.isConnected():
self.show_connect_dialog = True
wx.CallAfter(self.Close)
return
if self._machine_type == 'ultimaker':
if programmer.hasChecksumFunction():
wx.CallAfter(
self.updateLabel,
_("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UMO firmware on an UM2 or UMO+?"
))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
if self._machine_type == 'ultimaker_plus' or self._machine_type == 'ultimaker2':
if not programmer.hasChecksumFunction():
wx.CallAfter(
self.updateLabel,
_("Failed to install firmware:\nThis firmware is not compatible with this machine.\nTrying to install UM2 or UMO+ firmware on an UMO?"
))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.CallAfter(self.updateLabel, _("Uploading firmware..."))
try:
programmer.programChip(hexFile)
self.success = True
wx.CallAfter(self.updateLabel, _("Done!"))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel,
_("Failed to write firmware.\n") + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
def __init__(self, parent):
super(machineSettingsDialog, self).__init__(None,
title="Machine settings")
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
extruderCount = int(profile.getMachineSetting('extruder_amount'))
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'relative_extrusion', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right,
'extruder_head_size_height',
index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i + 1))
configBase.SettingRow(left,
'extruder_offset_x%d' % (i),
index=idx)
configBase.SettingRow(left,
'extruder_offset_y%d' % (i),
index=idx)
configBase.TitleRow(right, _("Communication settings"))
configBase.SettingRow(right,
'serial_port',
['AUTO'] + machineCom.serialList(),
index=idx)
configBase.SettingRow(right,
'serial_baud', ['AUTO'] +
map(str, machineCom.baudrateList()),
index=idx)
self.nb.AddPage(
main,
profile.getMachineSetting('machine_name', idx).title())
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, 'Ok')
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, 'Add new machine')
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, 'Remove machine')
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
def __init__(self, parent):
super(machineSettingsDialog,
self).__init__(parent, title=_("Machine settings"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
printer_type = profile.getMachineSetting('machine_type', idx)
extruderCount = int(
profile.getMachineSetting('extruder_amount', idx))
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
if not printer_type.startswith(
'lulzbot_TAZ_6'
): #Disabled for TAZ 6, use LCD controller instead
configBase.SettingRow(left, 'extruder_z_offset', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_PLA',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_PLA', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_ABS',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_ABS', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_HIPS',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_HIPS', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_PETT',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_PETT', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_Nylon',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_Nylon', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_Other',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_Other', index=idx)
if printer_type.startswith('lulzbot_'):
configBase.TitleRow(right, _("Tool Head"))
row = configBase.ToolHeadRow(right, 'toolhead', index=idx)
row.button.Bind(wx.EVT_BUTTON, self.OnChangeToolheadButton)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right,
'extruder_head_size_height',
index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i + 1))
configBase.SettingRow(left,
'extruder_offset_x%d' % (i),
index=idx)
configBase.SettingRow(left,
'extruder_offset_y%d' % (i),
index=idx)
configBase.TitleRow(right, _("Communication settings"))
serial_list = ['AUTO'] + machineCom.serialList()
serial_list_labels = serial_list[:]
if profile.getMachineSetting('serial_port') not in serial_list:
serial_list.append(profile.getMachineSetting('serial_port'))
serial_list_labels.append(
profile.getMachineSetting('serial_port') +
_(" (Currently unavailable)"))
configBase.SettingRow(right,
'serial_port',
serial_list,
serial_list_labels,
index=idx)
configBase.SettingRow(right,
'serial_baud', ['AUTO'] +
map(str, machineCom.baudrateList()),
index=idx)
machine_name = profile.getMachineName(idx)
machine_title = machine_name.title()
machine_title = machine_title.replace('Taz', 'TAZ')
machine_title = machine_title.replace('Lulzbot', 'LulzBot')
self.nb.AddPage(main, machine_title)
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _('Ok'))
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, _('Add new machine'))
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, _('Remove machine'))
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
self.renButton = wx.Button(self.buttonPanel, -1,
_('Change machine name'))
self.renButton.Bind(wx.EVT_BUTTON, self.OnRenameMachine)
self.buttonPanel.GetSizer().Add(self.renButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
def __init__(self, parent):
super(machineSettingsDialog, self).__init__(None, title="Machine settings")
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
extruderCount = int(profile.getMachineSetting('extruder_amount'))
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_height', index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i+1))
configBase.SettingRow(left, 'extruder_offset_x%d' % (i), index=idx)
configBase.SettingRow(left, 'extruder_offset_y%d' % (i), index=idx)
configBase.TitleRow(right, _("Communication settings"))
configBase.SettingRow(right, 'serial_port', ['AUTO'] + machineCom.serialList(), index=idx)
configBase.SettingRow(right, 'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()), index=idx)
self.nb.AddPage(main, profile.getMachineSetting('machine_name', idx).title())
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, 'Ok')
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, 'Add new machine')
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, 'Remove machine')
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
def __init__(self, parent):
super(preferencesDialog, self).__init__(None,
title="Preferences",
style=wx.DEFAULT_DIALOG_STYLE)
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.oldExtruderAmount = int(profile.getPreference('extruder_amount'))
self.panel = configBase.configPanelBase(self)
left, right, main = self.panel.CreateConfigPanel(self)
configBase.TitleRow(left, 'Machine settings')
c = configBase.SettingRow(left,
'Steps per E',
'steps_per_e',
'0',
'Amount of steps per mm filament extrusion',
type='preference')
validators.validFloat(c, 0.1)
c = configBase.SettingRow(left,
'Maximum width (mm)',
'machine_width',
'205',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Maximum depth (mm)',
'machine_depth',
'205',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Maximum height (mm)',
'machine_height',
'200',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Extruder count',
'extruder_amount', ['1', '2', '3', '4'],
'Amount of extruders in your machine.',
type='preference')
c = configBase.SettingRow(
left,
'Heated bed',
'has_heated_bed',
False,
'If you have an heated bed, this enabled heated bed settings',
type='preference')
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, 'Extruder %d' % (i + 1))
c = configBase.SettingRow(
left,
'Offset X',
'extruder_offset_x%d' % (i),
'0.0',
'The offset of your secondary extruder compared to the primary.',
type='preference')
validators.validFloat(c)
c = configBase.SettingRow(
left,
'Offset Y',
'extruder_offset_y%d' % (i),
'0.0',
'The offset of your secondary extruder compared to the primary.',
type='preference')
validators.validFloat(c)
configBase.TitleRow(left, 'Colours')
c = configBase.SettingRow(left,
'Model colour',
'model_colour',
wx.Colour(0, 0, 0),
'',
type='preference')
for i in xrange(1, self.oldExtruderAmount):
c = configBase.SettingRow(left,
'Model colour (%d)' % (i + 1),
'model_colour%d' % (i + 1),
wx.Colour(0, 0, 0),
'',
type='preference')
configBase.TitleRow(right, 'Filament settings')
c = configBase.SettingRow(
right,
'Density (kg/m3)',
'filament_density',
'1300',
'Weight of the filament per m3. Around 1300 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print.',
type='preference')
validators.validFloat(c, 500.0, 3000.0)
c = configBase.SettingRow(
right,
'Cost (price/kg)',
'filament_cost_kg',
'0',
'Cost of your filament per kg, to estimate the cost of the final print.',
type='preference')
validators.validFloat(c, 0.0)
c = configBase.SettingRow(
right,
'Cost (price/m)',
'filament_cost_meter',
'0',
'Cost of your filament per meter, to estimate the cost of the final print.',
type='preference')
validators.validFloat(c, 0.0)
configBase.TitleRow(right, 'Communication settings')
c = configBase.SettingRow(
right,
'Serial port',
'serial_port', ['AUTO'] + machineCom.serialList(),
'Serial port to use for communication with the printer',
type='preference')
c = configBase.SettingRow(
right,
'Baudrate',
'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()),
'Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600',
type='preference')
configBase.TitleRow(right, 'Slicer settings')
#c = configBase.SettingRow(right, 'Slicer selection', 'slicer', ['Cura (Skeinforge based)', 'Slic3r'], 'Which slicer to use to slice objects. Usually the Cura engine produces the best results. But Slic3r is developing fast and is faster with slicing.', type = 'preference')
c = configBase.SettingRow(
right,
'Save profile on slice',
'save_profile',
False,
'When slicing save the profile as [stl_file]_profile.ini next to the model.',
type='preference')
configBase.TitleRow(right, 'SD Card settings')
if len(profile.getSDcardDrives()) > 1:
c = configBase.SettingRow(
right,
'SD card drive',
'sdpath',
profile.getSDcardDrives(),
'Location of your SD card, when using the copy to SD feature.',
type='preference')
else:
c = configBase.SettingRow(
right,
'SD card path',
'sdpath',
'',
'Location of your SD card, when using the copy to SD feature.',
type='preference')
c = configBase.SettingRow(
right,
'Copy to SD with 8.3 names',
'sdshortnames',
False,
'Save the gcode files in short filenames, so they are properly shown on the UltiController',
type='preference')
configBase.TitleRow(right, 'Cura settings')
c = configBase.SettingRow(
right,
'Check for updates',
'check_for_updates',
True,
'Check for newer versions of Cura on startup',
type='preference')
c = configBase.SettingRow(right,
'Prompt for filename',
'filename_prompt',
False,
'Prompt for a filename when saving files',
type='preference')
c = configBase.SettingRow(
right,
'Prompt on overwrite file',
'file_overwrite_prompt',
False,
'Prompt for overwrite when output file already exits',
type='preference')
self.okButton = wx.Button(right, -1, 'Ok')
right.GetSizer().Add(self.okButton, (right.GetSizer().GetRows(), 0),
flag=wx.BOTTOM,
border=5)
self.okButton.Bind(wx.EVT_BUTTON, self.OnClose)
self.MakeModal(True)
main.Fit()
self.Fit()
def __init__(self, parent):
super(preferencesDialog, self).__init__(None, title=language.getText("Preferences"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.oldExtruderAmount = int(profile.getPreference('extruder_amount'))
self.panel = configBase.configPanelBase(self)
left, right, main = self.panel.CreateConfigPanel(self)
configBase.TitleRow(left, language.getText('Machine settings'))
configBase.SettingRow(left, 'steps_per_e')
configBase.SettingRow(left, 'machine_width')
configBase.SettingRow(left, 'machine_depth')
configBase.SettingRow(left, 'machine_height')
configBase.SettingRow(left, 'extruder_amount')
configBase.SettingRow(left, 'has_heated_bed')
configBase.TitleRow(left, language.getText('Printer head size'))
configBase.SettingRow(left, 'extruder_head_size_min_x')
configBase.SettingRow(left, 'extruder_head_size_min_y')
configBase.SettingRow(left, 'extruder_head_size_max_x')
configBase.SettingRow(left, 'extruder_head_size_max_y')
configBase.SettingRow(left, 'extruder_head_size_height')
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, 'Extruder %d' % (i+1))
configBase.SettingRow(left, 'extruder_offset_x%d' % (i))
configBase.SettingRow(left, 'extruder_offset_y%d' % (i))
configBase.TitleRow(right, language.getText('Colours'))
configBase.SettingRow(right, 'model_colour', wx.Colour)
for i in xrange(1, self.oldExtruderAmount):
configBase.SettingRow(right, 'model_colour%d' % (i+1), wx.Colour)
configBase.TitleRow(right, language.getText('Filament settings'))
configBase.SettingRow(right, 'filament_physical_density')
configBase.SettingRow(right, 'filament_cost_kg')
configBase.SettingRow(right, 'filament_cost_meter')
configBase.TitleRow(right, language.getText('Communication settings'))
configBase.SettingRow(right, 'serial_port', ['AUTO'] + machineCom.serialList())
configBase.SettingRow(right, 'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()))
#configBase.TitleRow(right, 'Slicer settings')
#configBase.SettingRow(right, 'save_profile')
#configBase.TitleRow(right, 'SD Card settings')
configBase.TitleRow(right, language.getText('Cura settings'))
configBase.SettingRow(right, 'auto_detect_sd')
configBase.SettingRow(right, 'check_for_updates')
configBase.SettingRow(right, 'submit_slice_information')
self.okButton = wx.Button(right, -1, language.getText('Ok'))
right.GetSizer().Add(self.okButton, (right.GetSizer().GetRows(), 0), flag=wx.BOTTOM, border=5)
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
main.Fit()
self.Fit()
def __init__(self, parent):
super(preferencesDialog, self).__init__(None, title="Preferences", style=wx.DEFAULT_DIALOG_STYLE)
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.oldExtruderAmount = int(profile.getPreference('extruder_amount'))
self.panel = configBase.configPanelBase(self)
left, right, main = self.panel.CreateConfigPanel(self)
configBase.TitleRow(left, 'Machine settings')
c = configBase.SettingRow(left, 'Steps per E', 'steps_per_e', '0', 'Amount of steps per mm filament extrusion', type = 'preference')
validators.validFloat(c, 0.1)
c = configBase.SettingRow(left, 'Maximum width (mm)', 'machine_width', '205', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Maximum depth (mm)', 'machine_depth', '205', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Maximum height (mm)', 'machine_height', '200', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Extruder count', 'extruder_amount', ['1', '2', '3', '4'], 'Amount of extruders in your machine.', type = 'preference')
c = configBase.SettingRow(left, 'Heated bed', 'has_heated_bed', False, 'If you have an heated bed, this enabled heated bed settings', type = 'preference')
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, 'Extruder %d' % (i+1))
c = configBase.SettingRow(left, 'Offset X', 'extruder_offset_x%d' % (i), '0.0', 'The offset of your secondary extruder compared to the primary.', type = 'preference')
validators.validFloat(c)
c = configBase.SettingRow(left, 'Offset Y', 'extruder_offset_y%d' % (i), '0.0', 'The offset of your secondary extruder compared to the primary.', type = 'preference')
validators.validFloat(c)
configBase.TitleRow(left, 'Colours')
c = configBase.SettingRow(left, 'Model colour', 'model_colour', wx.Colour(0,0,0), '', type = 'preference')
for i in xrange(1, self.oldExtruderAmount):
c = configBase.SettingRow(left, 'Model colour (%d)' % (i+1), 'model_colour%d' % (i+1), wx.Colour(0,0,0), '', type = 'preference')
configBase.TitleRow(right, 'Filament settings')
c = configBase.SettingRow(right, 'Density (kg/m3)', 'filament_density', '1300', 'Weight of the filament per m3. Around 1300 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print.', type = 'preference')
validators.validFloat(c, 500.0, 3000.0)
c = configBase.SettingRow(right, 'Cost (price/kg)', 'filament_cost_kg', '0', 'Cost of your filament per kg, to estimate the cost of the final print.', type = 'preference')
validators.validFloat(c, 0.0)
c = configBase.SettingRow(right, 'Cost (price/m)', 'filament_cost_meter', '0', 'Cost of your filament per meter, to estimate the cost of the final print.', type = 'preference')
validators.validFloat(c, 0.0)
configBase.TitleRow(right, 'Communication settings')
c = configBase.SettingRow(right, 'Serial port', 'serial_port', ['AUTO'] + machineCom.serialList(), 'Serial port to use for communication with the printer', type = 'preference')
c = configBase.SettingRow(right, 'Baudrate', 'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()), 'Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600', type = 'preference')
configBase.TitleRow(right, 'Slicer settings')
#c = configBase.SettingRow(right, 'Slicer selection', 'slicer', ['Cura (Skeinforge based)', 'Slic3r'], 'Which slicer to use to slice objects. Usually the Cura engine produces the best results. But Slic3r is developing fast and is faster with slicing.', type = 'preference')
c = configBase.SettingRow(right, 'Save profile on slice', 'save_profile', False, 'When slicing save the profile as [stl_file]_profile.ini next to the model.', type = 'preference')
configBase.TitleRow(right, 'SD Card settings')
if len(profile.getSDcardDrives()) > 1:
c = configBase.SettingRow(right, 'SD card drive', 'sdpath', profile.getSDcardDrives(), 'Location of your SD card, when using the copy to SD feature.', type = 'preference')
else:
c = configBase.SettingRow(right, 'SD card path', 'sdpath', '', 'Location of your SD card, when using the copy to SD feature.', type = 'preference')
c = configBase.SettingRow(right, 'Copy to SD with 8.3 names', 'sdshortnames', False, 'Save the gcode files in short filenames, so they are properly shown on the UltiController', type = 'preference')
configBase.TitleRow(right, 'Cura settings')
c = configBase.SettingRow(right, 'Check for updates', 'check_for_updates', True, 'Check for newer versions of Cura on startup', type = 'preference')
self.okButton = wx.Button(right, -1, 'Ok')
right.GetSizer().Add(self.okButton, (right.GetSizer().GetRows(), 0), flag=wx.BOTTOM, border=5)
self.okButton.Bind(wx.EVT_BUTTON, self.OnClose)
self.MakeModal(True)
main.Fit()
self.Fit()
def __init__(self, parent):
super(machineSettingsDialog, self).__init__(parent, title=_("Machine settings"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
printer_type = profile.getMachineSetting('machine_type', idx)
extruderCount = int(profile.getMachineSetting('extruder_amount', idx))
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
if not printer_type.startswith('lulzbot_TAZ_6'): #Disabled for TAZ 6, use LCD controller instead
configBase.SettingRow(left, 'extruder_z_offset', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
if printer_type.startswith('lulzbot_'):
configBase.TitleRow(right, _("Tool Head"))
row = configBase.ToolHeadRow(right, 'toolhead', index=idx)
row.button.Bind(wx.EVT_BUTTON, self.OnChangeToolheadButton)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_height', index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i+1))
configBase.SettingRow(left, 'extruder_offset_x%d' % (i), index=idx)
configBase.SettingRow(left, 'extruder_offset_y%d' % (i), index=idx)
configBase.TitleRow(right, _("Communication settings"))
serial_list = ['AUTO'] + machineCom.serialList()
serial_list_labels = serial_list[:]
if profile.getMachineSetting('serial_port') not in serial_list:
serial_list.append(profile.getMachineSetting('serial_port'))
serial_list_labels.append(profile.getMachineSetting('serial_port') + _(" (Currently unavailable)"))
configBase.SettingRow(right, 'serial_port', serial_list, serial_list_labels, index=idx)
configBase.SettingRow(right, 'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()), index=idx)
self.nb.AddPage(main, profile.getMachineName(idx))
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _('Ok'))
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, _('Add new machine'))
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, _('Remove machine'))
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
self.renButton = wx.Button(self.buttonPanel, -1, _('Change machine name'))
self.renButton.Bind(wx.EVT_BUTTON, self.OnRenameMachine)
self.buttonPanel.GetSizer().Add(self.renButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
