def __init__(self,
runway,
aircraft,
arrivalAirport,
descentGlideSlopeDegrees=3.0):
'''
arrival Airport provides the field elevation above sea level in meters
'''
self.className = self.__class__.__name__
Graph.__init__(self)
assert isinstance(descentGlideSlopeDegrees, float)
self.descentGlideSlopeDegrees = descentGlideSlopeDegrees
# sanity check
assert isinstance(arrivalAirport, Airport)
self.arrivalAirport = arrivalAirport
''' sanity check RunWay '''
assert isinstance(runway, RunWay)
self.runway = runway
assert isinstance(aircraft, BadaAircraft)
self.aircraft = aircraft
fieldElevationAboveSeaLevelMeters = arrivalAirport.getFieldElevationAboveSeaLevelMeters(
)
print(self.className +
': airport field Elevation Above Sea Level= {0:.2f} meters'.
format(fieldElevationAboveSeaLevelMeters))
strName = arrivalAirport.getName(
) + '-' + 'RunWay' + '-' + self.runway.getName()
self.runWayEndPoint = WayPoint(
Name=strName,
LatitudeDegrees=runway.getLatitudeDegrees(),
LongitudeDegrees=runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters=fieldElevationAboveSeaLevelMeters)
''' touch down is provided from BADA Ground Movement Landing Length '''
landingDistanceMeters = self.aircraft.groundMovement.getLandingLengthMeters(
)
#print self.className + ': {0} aircraft landing length: {1:.2F} meters'.format(self.aircraft.ICAOcode, landingDistanceMeters)
runWayOrientationDegrees = self.runway.getTrueHeadingDegrees()
''' if orientation is 270 degrees from runway end point then ... touch down bearing is 360-270=90 bearing from end point '''
self.runWayTouchDownPoint = self.runWayEndPoint.getWayPointAtDistanceBearing(
Name='runway-touch-down',
DistanceMeters=landingDistanceMeters,
BearingDegrees=runWayOrientationDegrees)
''' elevation of touch down point = field elevation'''
self.runWayTouchDownPoint.setAltitudeMeanSeaLevelMeters(
fieldElevationAboveSeaLevelMeters)
strMsg = "{0} - distance from RunWay - TouchDown to RunWay - End= {1:.2f} meters".format(
self.className,
self.runWayTouchDownPoint.getDistanceMetersTo(self.runWayEndPoint))
print(strMsg)
self.bearingDegrees = self.runWayTouchDownPoint.getBearingDegreesTo(
self.runWayEndPoint)
print(self.className +
": bearing from touch-down to runway end= {0:.2f} degrees".
format(self.bearingDegrees))
def read(self):
assert len(self.FilePath) > 0
self.book = open_workbook(self.FilePath)
''' assert there is only one sheet '''
sheet = self.book.sheet_by_name('WayPoints')
for row in range(sheet.nrows):
rowValues = sheet.row_values(row,
start_colx=0,
end_colx=sheet.ncols)
# Print the values of the row formatted to 10 characters wide
if row == 0:
self.ColumnNames = {}
index = 0
for column in rowValues:
if column not in fieldNames:
print(
self.className +
': ERROR - expected way-points column name= {0} not in field names'
.format(column))
return False
else:
self.ColumnNames[column] = index
index += 1
else:
WayPointName = str(rowValues[0]).strip().upper()
if not (WayPointName in self.WayPointsDict.keys()):
wayPointDict = {}
for column in self.ColumnNames:
if column == 'Latitude' or column == 'Longitude':
''' replace degree character '''
strLatLong = (
rowValues[self.ColumnNames[column]]).strip()
if '°' in strLatLong:
strLatLong = (strLatLong).replace('°', '-')
#strLatLong = strLatLong.encode('ascii', 'ignore')
strLatLong = str(strLatLong).strip().replace(
"'", '-').replace(' ', '').replace('"', '')
#print 'lat-long= '+ strLatLong
wayPointDict[
column] = convertDegreeMinuteSecondToDecimal(
strLatLong)
else:
wayPointDict[column] = str(
rowValues[self.ColumnNames[column]]).strip()
''' create a way point '''
wayPoint = WayPoint(wayPointDict['WayPoint'],
wayPointDict['Latitude'],
wayPointDict['Longitude'])
self.WayPointsDict[WayPointName] = wayPoint
else:
print(
"duplicates found in Way Points database - way Point= {0}"
.format(WayPointName))
return True
def computeTouchDownWayPoint(self):
''' get landing length in meters '''
landingLengthMeters = self.aircraft.getLandingLengthMeters()
''' run-way orientation '''
runwayTrueHeadingDegrees = self.runway.getTrueHeadingDegrees()
''' run-way end point '''
strRunWayEndPointName = self.airport.getName() + '-' + 'Rwy'+'-'+self.runway.getName()
runWayEndPoint = WayPoint (Name = strRunWayEndPointName,
LatitudeDegrees = self.runway.getLatitudeDegrees(),
LongitudeDegrees = self.runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters =self.airport.getFieldElevationAboveSeaLevelMeters())
strTouchDownWayPointName = self.airport.getName() + '-' + 'Rwy'+'-' + self.runway.getName() + '-' + 'touch-down'
touchDownWayPoint = runWayEndPoint.getWayPointAtDistanceBearing(Name = strTouchDownWayPointName,
DistanceMeters = landingLengthMeters,
BearingDegrees = runwayTrueHeadingDegrees)
touchDownWayPoint.setAltitudeMeanSeaLevelMeters(self.airport.getFieldElevationAboveSeaLevelMeters())
return touchDownWayPoint
def __init__(self,
runway,
aircraft,
arrivalAirport ,
descentGlideSlopeDegrees = 3.0):
'''
arrival Airport provides the field elevation above sea level in meters
'''
self.className = self.__class__.__name__
Graph.__init__(self)
assert isinstance(descentGlideSlopeDegrees, float)
self.descentGlideSlopeDegrees = descentGlideSlopeDegrees
# sanity check
assert isinstance(arrivalAirport, Airport)
self.arrivalAirport = arrivalAirport
''' sanity check RunWay '''
assert isinstance(runway, RunWay)
self.runway = runway
assert isinstance(aircraft, BadaAircraft)
self.aircraft = aircraft
fieldElevationAboveSeaLevelMeters = arrivalAirport.getFieldElevationAboveSeaLevelMeters()
print self.className + ': airport field Elevation Above Sea Level= {0:.2f} meters'.format(fieldElevationAboveSeaLevelMeters)
strName = arrivalAirport.getName() + '-' + 'RunWay'+'-'+self.runway.getName()
self.runWayEndPoint = WayPoint (Name=strName,
LatitudeDegrees=runway.getLatitudeDegrees(),
LongitudeDegrees=runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters=fieldElevationAboveSeaLevelMeters)
''' touch down is provided from BADA Ground Movement Landing Length '''
landingDistanceMeters = self.aircraft.groundMovement.getLandingLengthMeters()
#print self.className + ': {0} aircraft landing length: {1:.2F} meters'.format(self.aircraft.ICAOcode, landingDistanceMeters)
runWayOrientationDegrees = self.runway.getTrueHeadingDegrees()
''' if orientation is 270 degrees from runway end point then ... touch down bearing is 360-270=90 bearing from end point '''
self.runWayTouchDownPoint = self.runWayEndPoint.getWayPointAtDistanceBearing(Name='runway-touch-down',
DistanceMeters=landingDistanceMeters,
BearingDegrees=runWayOrientationDegrees )
''' elevation of touch down point = field elevation'''
self.runWayTouchDownPoint.setAltitudeMeanSeaLevelMeters(fieldElevationAboveSeaLevelMeters)
strMsg = self.className + ": distance from RunWay - TouchDown to RunWay - End= "
strMsg += str(self.runWayTouchDownPoint.getDistanceMetersTo(self.runWayEndPoint)) + " meters"
print strMsg
self.bearingDegrees = self.runWayTouchDownPoint.getBearingDegreesTo(self.runWayEndPoint)
print self.className + ": bearing from touch-down to runway end= {0:.2f} degrees".format(self.bearingDegrees)
def read(self):
workbook = xlrd.open_workbook(self.FilePath)
worksheet = workbook.sheet_by_index(0)
self.rows = []
for i, row in enumerate(range(worksheet.nrows)):
r = []
for j, col in enumerate(range(worksheet.ncols)):
r.append(worksheet.cell_value(i, j))
if (i == 0):
self.headers = r
else:
self.rows.append(r)
self.geoPoints.append(WayPoint(r[1], r[2], r[3]))
print("{0} - read {1} rows".format(self.className, len(self.rows)))
print(self.headers) # Print column headings
print(self.rows[0]) # Print first data row sample
return (len(self.rows) > 0)
class DescentGlideSlope(Graph):
'''
the glide slope starts 5 Nautical miles ahead of the touch-down point
'''
className = ''
descentGlideSlopeDegrees = 0.0
runWayTouchDownPoint= None
runWayEndPoint = None
runway = None
aircraft = None
arrivalAirport = None
def __init__(self,
runway,
aircraft,
arrivalAirport ,
descentGlideSlopeDegrees = 3.0):
'''
arrival Airport provides the field elevation above sea level in meters
'''
self.className = self.__class__.__name__
Graph.__init__(self)
assert isinstance(descentGlideSlopeDegrees, float)
self.descentGlideSlopeDegrees = descentGlideSlopeDegrees
# sanity check
assert isinstance(arrivalAirport, Airport)
self.arrivalAirport = arrivalAirport
''' sanity check RunWay '''
assert isinstance(runway, RunWay)
self.runway = runway
assert isinstance(aircraft, BadaAircraft)
self.aircraft = aircraft
fieldElevationAboveSeaLevelMeters = arrivalAirport.getFieldElevationAboveSeaLevelMeters()
print self.className + ': airport field Elevation Above Sea Level= {0:.2f} meters'.format(fieldElevationAboveSeaLevelMeters)
strName = arrivalAirport.getName() + '-' + 'RunWay'+'-'+self.runway.getName()
self.runWayEndPoint = WayPoint (Name=strName,
LatitudeDegrees=runway.getLatitudeDegrees(),
LongitudeDegrees=runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters=fieldElevationAboveSeaLevelMeters)
''' touch down is provided from BADA Ground Movement Landing Length '''
landingDistanceMeters = self.aircraft.groundMovement.getLandingLengthMeters()
#print self.className + ': {0} aircraft landing length: {1:.2F} meters'.format(self.aircraft.ICAOcode, landingDistanceMeters)
runWayOrientationDegrees = self.runway.getTrueHeadingDegrees()
''' if orientation is 270 degrees from runway end point then ... touch down bearing is 360-270=90 bearing from end point '''
self.runWayTouchDownPoint = self.runWayEndPoint.getWayPointAtDistanceBearing(Name='runway-touch-down',
DistanceMeters=landingDistanceMeters,
BearingDegrees=runWayOrientationDegrees )
''' elevation of touch down point = field elevation'''
self.runWayTouchDownPoint.setAltitudeMeanSeaLevelMeters(fieldElevationAboveSeaLevelMeters)
strMsg = self.className + ": distance from RunWay - TouchDown to RunWay - End= "
strMsg += str(self.runWayTouchDownPoint.getDistanceMetersTo(self.runWayEndPoint)) + " meters"
print strMsg
self.bearingDegrees = self.runWayTouchDownPoint.getBearingDegreesTo(self.runWayEndPoint)
print self.className + ": bearing from touch-down to runway end= {0:.2f} degrees".format(self.bearingDegrees)
def buildGlideSlope(self,
deltaTimeSeconds,
elapsedTimeSeconds,
initialWayPoint,
flownDistanceMeters,
distanceStillToFlyMeters,
distanceToLastFixMeters):
''' sanity checks '''
assert isinstance(initialWayPoint, WayPoint)
'''====================================================='''
''' hopefully in approach or landing configuration dh/dt such as dh/ds between 3 and 5 degrees '''
'''====================================================='''
''' descent stops when altitude Mean Sea Level meters <= airport field MSL meters '''
fieldElevationAboveSeaLevelMeters = self.arrivalAirport.getFieldElevationAboveSeaLevelMeters()
''' initial conditions '''
index = 0
aircraftAltitudeMeanSeaLevelMeters = self.aircraft.getCurrentAltitudeSeaLevelMeters()
endOfSimulation = False
newIntermediatePoint = None
while ( (endOfSimulation == False) and
(aircraftAltitudeMeanSeaLevelMeters >= fieldElevationAboveSeaLevelMeters) and
not( self.aircraft.isArrivalGroundRun()) ):
''' initial way point '''
if index == 0:
intermediateWayPoint = initialWayPoint
''' correct bearing to each touch down '''
self.bearingDegrees = intermediateWayPoint.getBearingDegreesTo(self.runWayTouchDownPoint)
#print self.className + ': bearing to touch down= {0:.2f} degrees'.format(self.bearingDegrees)
''' aircraft fly '''
endOfSimulation, deltaDistanceMeters , aircraftAltitudeMeanSeaLevelMeters = self.aircraft.fly(
elapsedTimeSeconds = elapsedTimeSeconds,
deltaTimeSeconds = deltaTimeSeconds ,
distanceStillToFlyMeters = distanceStillToFlyMeters,
currentPosition = intermediateWayPoint,
distanceToLastFixMeters = distanceToLastFixMeters)
flownDistanceMeters += deltaDistanceMeters
distanceStillToFlyMeters -= deltaDistanceMeters
distanceToLastFixMeters -= deltaDistanceMeters
''' update aircraft state vector '''
elapsedTimeSeconds += deltaTimeSeconds
Name = ''
''' only the first and the last point has a name '''
if index == 0:
Name = 'slope-pt-{0}-{1:.2f}-Nm'.format(index, flownDistanceMeters*Meter2NauticalMiles)
newIntermediatePoint = intermediateWayPoint.getWayPointAtDistanceBearing( Name = Name,
DistanceMeters = deltaDistanceMeters,
BearingDegrees = self.bearingDegrees)
''' set altitude '''
if isinstance(newIntermediatePoint, WayPoint):
newIntermediatePoint.setAltitudeMeanSeaLevelMeters(aircraftAltitudeMeanSeaLevelMeters)
newIntermediatePoint.setElapsedTimeSeconds(elapsedTimeSeconds)
''' append the new point to the list '''
self.addVertex(newIntermediatePoint)
''' replace the intermediate point '''
intermediateWayPoint = newIntermediatePoint
index += 1
''' set the name of the last point '''
Name = 'slope-pt-{0}-{1:.2f}-Nm'.format(index, flownDistanceMeters*Meter2NauticalMiles)
if not(newIntermediatePoint is None):
newIntermediatePoint.setName(Name = Name)
def buildSimulatedGlideSlope(self, descentGlideSlopeSizeNautics):
'''====================================================='''
''' build the three degrees glide slope '''
''' the slope is built backwards and then it is reversed
''======================================================'''
#print self.className + ' ======= simulated glide slope ========='
glideSlopeLengthMeters = descentGlideSlopeSizeNautics * NauticalMiles2Meters
print self.className + ': glide slope Length= ' + str(glideSlopeLengthMeters), ' meters'
bearingDegrees = self.runway.getTrueHeadingDegrees()
print self.className + ': glide slope orientation= ' + str(bearingDegrees) + ' degrees'
fieldElevationAboveSeaLevelMeters = self.arrivalAirport.getFieldElevationAboveSeaLevelMeters()
''' internal list that will be reversed '''
intermediateGlideSlopeRoute = []
'''=============================='''
index = 0
initialIndex = index
elapsedTimeSeconds = 0.0
'''=================================================================='''
''' glide slope to intercept the landing ILS beam '''
'''=================================================================='''
''' glide slope is split into 100 parts '''
distanceMeters = 0.0
while (distanceMeters < glideSlopeLengthMeters) :
distanceMeters += glideSlopeLengthMeters/NumberOfSlopeParts
#print 'index= ', index
if index == initialIndex:
''' first point is the run way touch down '''
intermediatePoint = self.runWayTouchDownPoint
#intermediatePoint.dump()
''' glide slope angle needs to be positive here : because slope is built backwards from run-way threshold '''
altitudeMeters = math.tan(math.radians(abs(self.descentGlideSlopeDegrees))) * distanceMeters
name = 'glide-slope-pt-{0}-{1}-meters'.format(index, distanceMeters)
''' distance between each slope point is slope length divided by number of parts '''
newIntermediatePoint = intermediatePoint.getWayPointAtDistanceBearing(Name=name,
DistanceMeters=glideSlopeLengthMeters/NumberOfSlopeParts,
BearingDegrees=bearingDegrees)
''' set altitude '''
if isinstance(newIntermediatePoint, WayPoint):
''' need to add altitude above ground to field elevation '''
altitudeMeters += fieldElevationAboveSeaLevelMeters
newIntermediatePoint.setAltitudeMeanSeaLevelMeters(altitudeMeters)
elapsedTimeSeconds += 0.1
newIntermediatePoint.setElapsedTimeSeconds(elapsedTimeSeconds = elapsedTimeSeconds)
''' append the new point to the list '''
intermediateGlideSlopeRoute.append(newIntermediatePoint)
''' replace the intermediate point '''
intermediatePoint = newIntermediatePoint
index += 1
'''============================================================='''
''' reverse the order of the temporary list and build the graph '''
'''============================================================='''
for point in reversed(intermediateGlideSlopeRoute):
self.addVertex(point)
simulatedGlideSlopeLengthMeters = newIntermediatePoint.getDistanceMetersTo(self.runWayTouchDownPoint)
print self.className + ': distance from last way point to touch-down: {0:.2f} nautics'.format(simulatedGlideSlopeLengthMeters * Meter2NauticalMiles)
class DescentGlideSlope(Graph):
'''
the glide slope starts 5 Nautical miles ahead of the touch-down point
'''
className = ''
descentGlideSlopeDegrees = 0.0
runWayTouchDownPoint = None
runWayEndPoint = None
runway = None
aircraft = None
arrivalAirport = None
def __init__(self,
runway,
aircraft,
arrivalAirport,
descentGlideSlopeDegrees=3.0):
'''
arrival Airport provides the field elevation above sea level in meters
'''
self.className = self.__class__.__name__
Graph.__init__(self)
assert isinstance(descentGlideSlopeDegrees, float)
self.descentGlideSlopeDegrees = descentGlideSlopeDegrees
# sanity check
assert isinstance(arrivalAirport, Airport)
self.arrivalAirport = arrivalAirport
''' sanity check RunWay '''
assert isinstance(runway, RunWay)
self.runway = runway
assert isinstance(aircraft, BadaAircraft)
self.aircraft = aircraft
fieldElevationAboveSeaLevelMeters = arrivalAirport.getFieldElevationAboveSeaLevelMeters(
)
print self.className + ': airport field Elevation Above Sea Level= {0:.2f} meters'.format(
fieldElevationAboveSeaLevelMeters)
strName = arrivalAirport.getName(
) + '-' + 'RunWay' + '-' + self.runway.getName()
self.runWayEndPoint = WayPoint(
Name=strName,
LatitudeDegrees=runway.getLatitudeDegrees(),
LongitudeDegrees=runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters=fieldElevationAboveSeaLevelMeters)
''' touch down is provided from BADA Ground Movement Landing Length '''
landingDistanceMeters = self.aircraft.groundMovement.getLandingLengthMeters(
)
#print self.className + ': {0} aircraft landing length: {1:.2F} meters'.format(self.aircraft.ICAOcode, landingDistanceMeters)
runWayOrientationDegrees = self.runway.getTrueHeadingDegrees()
''' if orientation is 270 degrees from runway end point then ... touch down bearing is 360-270=90 bearing from end point '''
self.runWayTouchDownPoint = self.runWayEndPoint.getWayPointAtDistanceBearing(
Name='runway-touch-down',
DistanceMeters=landingDistanceMeters,
BearingDegrees=runWayOrientationDegrees)
''' elevation of touch down point = field elevation'''
self.runWayTouchDownPoint.setAltitudeMeanSeaLevelMeters(
fieldElevationAboveSeaLevelMeters)
strMsg = self.className + ": distance from RunWay - TouchDown to RunWay - End= "
strMsg += str(
self.runWayTouchDownPoint.getDistanceMetersTo(
self.runWayEndPoint)) + " meters"
print strMsg
self.bearingDegrees = self.runWayTouchDownPoint.getBearingDegreesTo(
self.runWayEndPoint)
print self.className + ": bearing from touch-down to runway end= {0:.2f} degrees".format(
self.bearingDegrees)
def buildGlideSlope(self, deltaTimeSeconds, elapsedTimeSeconds,
initialWayPoint, flownDistanceMeters,
distanceStillToFlyMeters, distanceToLastFixMeters):
''' sanity checks '''
assert isinstance(initialWayPoint, WayPoint)
'''====================================================='''
''' hopefully in approach or landing configuration dh/dt such as dh/ds between 3 and 5 degrees '''
'''====================================================='''
''' descent stops when altitude Mean Sea Level meters <= airport field MSL meters '''
fieldElevationAboveSeaLevelMeters = self.arrivalAirport.getFieldElevationAboveSeaLevelMeters(
)
''' initial conditions '''
index = 0
aircraftAltitudeMeanSeaLevelMeters = self.aircraft.getCurrentAltitudeSeaLevelMeters(
)
endOfSimulation = False
newIntermediatePoint = None
while ((endOfSimulation == False)
and (aircraftAltitudeMeanSeaLevelMeters >=
fieldElevationAboveSeaLevelMeters)
and not (self.aircraft.isArrivalGroundRun())):
''' initial way point '''
if index == 0:
intermediateWayPoint = initialWayPoint
''' correct bearing to each touch down '''
self.bearingDegrees = intermediateWayPoint.getBearingDegreesTo(
self.runWayTouchDownPoint)
#print self.className + ': bearing to touch down= {0:.2f} degrees'.format(self.bearingDegrees)
''' aircraft fly '''
endOfSimulation, deltaDistanceMeters, aircraftAltitudeMeanSeaLevelMeters = self.aircraft.fly(
elapsedTimeSeconds=elapsedTimeSeconds,
deltaTimeSeconds=deltaTimeSeconds,
distanceStillToFlyMeters=distanceStillToFlyMeters,
currentPosition=intermediateWayPoint,
distanceToLastFixMeters=distanceToLastFixMeters)
flownDistanceMeters += deltaDistanceMeters
distanceStillToFlyMeters -= deltaDistanceMeters
distanceToLastFixMeters -= deltaDistanceMeters
''' update aircraft state vector '''
elapsedTimeSeconds += deltaTimeSeconds
Name = ''
''' only the first and the last point has a name '''
if index == 0:
Name = 'slope-pt-{0}-{1:.2f}-Nm'.format(
index, flownDistanceMeters * Meter2NauticalMiles)
newIntermediatePoint = intermediateWayPoint.getWayPointAtDistanceBearing(
Name=Name,
DistanceMeters=deltaDistanceMeters,
BearingDegrees=self.bearingDegrees)
''' set altitude '''
if isinstance(newIntermediatePoint, WayPoint):
newIntermediatePoint.setAltitudeMeanSeaLevelMeters(
aircraftAltitudeMeanSeaLevelMeters)
newIntermediatePoint.setElapsedTimeSeconds(elapsedTimeSeconds)
''' append the new point to the list '''
self.addVertex(newIntermediatePoint)
''' replace the intermediate point '''
intermediateWayPoint = newIntermediatePoint
index += 1
''' set the name of the last point '''
Name = 'slope-pt-{0}-{1:.2f}-Nm'.format(
index, flownDistanceMeters * Meter2NauticalMiles)
if not (newIntermediatePoint is None):
newIntermediatePoint.setName(Name=Name)
def buildSimulatedGlideSlope(self, descentGlideSlopeSizeNautics):
'''====================================================='''
''' build the three degrees glide slope '''
''' the slope is built backwards and then it is reversed
''======================================================'''
#print self.className + ' ======= simulated glide slope ========='
glideSlopeLengthMeters = descentGlideSlopeSizeNautics * NauticalMiles2Meters
print self.className + ': glide slope Length= ' + str(
glideSlopeLengthMeters), ' meters'
bearingDegrees = self.runway.getTrueHeadingDegrees()
print self.className + ': glide slope orientation= ' + str(
bearingDegrees) + ' degrees'
fieldElevationAboveSeaLevelMeters = self.arrivalAirport.getFieldElevationAboveSeaLevelMeters(
)
''' internal list that will be reversed '''
intermediateGlideSlopeRoute = []
'''=============================='''
index = 0
initialIndex = index
elapsedTimeSeconds = 0.0
'''=================================================================='''
''' glide slope to intercept the landing ILS beam '''
'''=================================================================='''
''' glide slope is split into 100 parts '''
distanceMeters = 0.0
while (distanceMeters < glideSlopeLengthMeters):
distanceMeters += glideSlopeLengthMeters / NumberOfSlopeParts
#print 'index= ', index
if index == initialIndex:
''' first point is the run way touch down '''
intermediatePoint = self.runWayTouchDownPoint
#intermediatePoint.dump()
''' glide slope angle needs to be positive here : because slope is built backwards from run-way threshold '''
altitudeMeters = math.tan(
math.radians(abs(
self.descentGlideSlopeDegrees))) * distanceMeters
name = 'glide-slope-pt-{0}-{1}-meters'.format(
index, distanceMeters)
''' distance between each slope point is slope length divided by number of parts '''
newIntermediatePoint = intermediatePoint.getWayPointAtDistanceBearing(
Name=name,
DistanceMeters=glideSlopeLengthMeters / NumberOfSlopeParts,
BearingDegrees=bearingDegrees)
''' set altitude '''
if isinstance(newIntermediatePoint, WayPoint):
''' need to add altitude above ground to field elevation '''
altitudeMeters += fieldElevationAboveSeaLevelMeters
newIntermediatePoint.setAltitudeMeanSeaLevelMeters(
altitudeMeters)
elapsedTimeSeconds += 0.1
newIntermediatePoint.setElapsedTimeSeconds(
elapsedTimeSeconds=elapsedTimeSeconds)
''' append the new point to the list '''
intermediateGlideSlopeRoute.append(newIntermediatePoint)
''' replace the intermediate point '''
intermediatePoint = newIntermediatePoint
index += 1
'''============================================================='''
''' reverse the order of the temporary list and build the graph '''
'''============================================================='''
for point in reversed(intermediateGlideSlopeRoute):
self.addVertex(point)
simulatedGlideSlopeLengthMeters = newIntermediatePoint.getDistanceMetersTo(
self.runWayTouchDownPoint)
print self.className + ': distance from last way point to touch-down: {0:.2f} nautics'.format(
simulatedGlideSlopeLengthMeters * Meter2NauticalMiles)
def test_DescentGlideSlope(self):
atmosphere = Atmosphere()
earth = Earth()
print '==================== three degrees Descent Slope Start ==================== ' + time.strftime(
"%c")
acBd = BadaAircraftDatabase()
aircraftICAOcode = 'A320'
if acBd.read():
if (acBd.aircraftExists(aircraftICAOcode)
and acBd.aircraftPerformanceFileExists(aircraftICAOcode)):
print '==================== aircraft found ==================== ' + time.strftime(
"%c")
aircraft = BadaAircraft(
ICAOcode=aircraftICAOcode,
aircraftFullName=acBd.getAircraftFullName(
aircraftICAOcode),
badaPerformanceFilePath=acBd.getAircraftPerformanceFile(
aircraftICAOcode),
atmosphere=atmosphere,
earth=earth)
aircraft.dump()
assert not (aircraft is None)
print '==================== runways database ==================== ' + time.strftime(
"%c")
runWaysDatabase = RunWayDataBase()
assert runWaysDatabase.read()
runway = runWaysDatabase.getFilteredRunWays(airportICAOcode='LFML',
runwayName='')
print runway
print "=========== arrival airport =========== " + time.strftime("%c")
airportsDB = AirportsDatabase()
assert (airportsDB.read())
MarseilleMarignane = airportsDB.getAirportFromICAOCode('LFML')
print MarseilleMarignane
print "=========== descent glide slope =========== " + time.strftime(
"%c")
threeDegreesGlideSlope = DescentGlideSlope(
runway=runway,
aircraft=aircraft,
arrivalAirport=MarseilleMarignane)
initialWayPoint = WayPoint(Name='startOfDescentGlideSlope', )
print "=========== DescentGlideSlope build the glide slope =========== " + time.strftime(
"%c")
# threeDegreesGlideSlope.buildGlideSlope(deltaTimeSeconds = 0.1,
# elapsedTimeSeconds = 0.0,
# initialWayPoint = None,
# flownDistanceMeters = 0.0,
# distanceStillToFlyMeters = 100000.0,
# distanceToLastFixMeters = 100000.0)
threeDegreesGlideSlope.buildSimulatedGlideSlope(
descentGlideSlopeSizeNautics=5.0)
print "=========== DescentGlideSlope =========== " + time.strftime(
"%c")
for node in threeDegreesGlideSlope.getVertices():
print node
print "=========== DescentGlideSlope length =========== " + time.strftime(
"%c")
print "get number of vertices= {0}".format(
threeDegreesGlideSlope.getNumberOfVertices())
print "get number of edges= {0}".format(
threeDegreesGlideSlope.getNumberOfEdges())
print 'Glide Slope overall length= {0} meters'.format(
threeDegreesGlideSlope.computeLengthMeters())
threeDegreesGlideSlope.createKmlOutputFile()
threeDegreesGlideSlope.createXlsxOutputFile()
print '==================== three degrees Descent Slope End ==================== ' + time.strftime(
"%c")
def computeGreatCircle(self,
deltaTimeSeconds,
elapsedTimeSeconds,
distanceStillToFlyMeters,
distanceToLastFixMeters):
''' internally modified '''
initialDeltaTimeSeconds = deltaTimeSeconds
'''
build the great circle
'''
distance_radians = 2 * math.asin(math.sqrt(math.pow((math.sin((self.ptlat1_radians-self.ptlat2_radians)/2)),2) + math.cos(self.ptlat1_radians) * math.cos(self.ptlat2_radians)*math.pow((math.sin((self.ptlon1_radians-self.ptlon2_radians)/2)),2)))
''' 6371.009 represents the mean radius of the earth'''
''' shortest path distance'''
distanceMeters = EarthMeanRadiusMeters * distance_radians
#print self.className + ': computeGreatCircle shortest path distance= ' + str(distanceMeters) + ' meters'
''' init the loop index '''
index = 0
elapsedTimeSeconds = elapsedTimeSeconds
#print self.className + ': initial True Air Speed= ' + str(trueAirSpeedMetersSecond) + ' meters/second'
overflownDistanceMeters = 0.0
''' loop over the over-flown distance '''
endOfSimulation = False
while ( (endOfSimulation == False) and (overflownDistanceMeters < distanceMeters)):
''' initialization of the loop '''
if index == 0:
print self.className + ': initial way-point= {0}'.format(self.initialWayPoint)
intermediateWayPoint = self.initialWayPoint
if self.aircraft.isCruiseSpeedReached():
''' speed up the computation => step = 10 seconds '''
deltaTimeSeconds = 10.0
else:
deltaTimeSeconds = initialDeltaTimeSeconds
''' fly => increase in true air speed '''
endOfSimulation, deltaDistanceMeters , altitudeMeanSeaLevelMeters = self.aircraft.fly(
elapsedTimeSeconds = elapsedTimeSeconds,
deltaTimeSeconds = deltaTimeSeconds,
distanceStillToFlyMeters = distanceStillToFlyMeters,
currentPosition = intermediateWayPoint,
distanceToLastFixMeters = distanceToLastFixMeters)
#print self.className + ': True AirSpeed= ' + str(trueAirSpeedMetersSecond) + ' meters/second'
''' cumulated over-flown distance '''
overflownDistanceMeters += deltaDistanceMeters
distanceStillToFlyMeters -= deltaDistanceMeters
distanceToLastFixMeters -= deltaDistanceMeters
fprime = overflownDistanceMeters / distanceMeters
#print self.className + ': altitude= ' + str(altitudeMeanSeaLevelMeters) + ' meters'
''' fprime is expressed as a fraction along the route from point 1 to point 2 '''
A = math.sin((1-fprime)*distance_radians) / math.sin(distance_radians)
B = math.sin(fprime*distance_radians) / math.sin(distance_radians)
x = A * math.cos(self.ptlat1_radians) * math.cos(self.ptlon1_radians) + B * math.cos(self.ptlat2_radians) * math.cos(self.ptlon2_radians)
y = A * math.cos(self.ptlat1_radians) * math.sin(self.ptlon1_radians) + B * math.cos(self.ptlat2_radians) * math.sin(self.ptlon2_radians)
z = A * math.sin(self.ptlat1_radians) + B * math.sin(self.ptlat2_radians)
newLatitudeRadians = math.atan2(z, math.sqrt(math.pow(x,2)+math.pow(y,2)))
newLongitudeRadians = math.atan2(y,x)
newlat_degrees = math.degrees(newLatitudeRadians)
newlon_degrees = math.degrees(newLongitudeRadians)
#name = 'gc-pt-{0}-{1:.2f}-Nm'.format(index, overflownDistanceMeters*Meter2NauticalMiles)
name = ''
''' new way point is built with an altitude '''
newWayPoint = WayPoint(Name = name,
LatitudeDegrees = newlat_degrees,
LongitudeDegrees = newlon_degrees,
AltitudeMeanSeaLevelMeters = altitudeMeanSeaLevelMeters)
''' update new point '''
elapsedTimeSeconds += deltaTimeSeconds
newWayPoint.setElapsedTimeSeconds(elapsedTimeSeconds)
''' build the route '''
self.addVertex(newWayPoint)
''' set new intermediate way-point '''
intermediateWayPoint = newWayPoint
''' increment index needed when adding vertex '''
index += 1
''' rename the final way point '''
intermediateWayPoint.setName(self.finalWayPoint.getName())
# minutes, seconds = divmod(elapsedTimeSeconds, 60)
# strMsg = ': passing way-point: {0} ... altitude= {1:.2f} feet ... distance= {2:.2f} nautics ... elapsed time= {3:.2f} sec ... elapsed time= {4} min {5} sec'.format(
# self.finalWayPoint.getName(),
# altitudeMeanSeaLevelMeters * Meter2Feet,
# self.computeLengthMeters()* Meter2NauticalMiles,
# elapsedTimeSeconds, int(minutes), int(seconds))
# print self.className + strMsg
print self.className + ': final way-point= {0}'.format(intermediateWayPoint)
return endOfSimulation
def test_waypoint(self):
print("=========== WayPoint start =========== " + time.strftime("%c"))
London = WayPoint('London-Heathrow', 51.5, 0.0)
Orly = WayPoint('Orly', 48.726254, 2.365247)
print("distance from London to Orly= ",
London.getDistanceMetersTo(Orly), " meters")
print("bearing from London to Orly= ", London.getBearingDegreesTo(Orly),
" degrees")
# Zurich = WayPoint('Zurich-Kloten', 47.458215, 8.555424)
Marseille = WayPoint('Marseille-Marignane', 43.438431, 5.214382)
Zurich = WayPoint('Zurich-Kloten', 47.458215, 8.555424)
print("=========== WayPoint resume =========== " + time.strftime("%c"))
print("distance from Marseille to Zurich= ",
Marseille.getDistanceMetersTo(Zurich), " meters")
print("bearing from Zurich to Marseille = ",
Zurich.getBearingDegreesTo(Marseille), " degrees")
distanceMeters = 321584.699454
bearingDegrees = Zurich.getBearingDegreesTo(Marseille)
# bearingDegrees = Marseille.getBearingDegreesTo(Zurich)
Zurich.dump()
Marseille.dump()
TopOfDescent = Zurich.getWayPointAtDistanceBearing('TopOfDescent',
distanceMeters,
bearingDegrees)
TopOfDescent.dump()
print("=========== WayPoint resume =========== " + time.strftime("%c"))
London.dump()
Orly.dump()
bearingDegrees = Orly.getBearingDegreesTo(London)
print("bearing from London to Orly= ", London.getBearingDegreesTo(Orly),
" degrees")
TopOfDescent = Orly.getWayPointAtDistanceBearing('TopOfDescent',
distanceMeters,
bearingDegrees)
TopOfDescent.dump()
def computeGreatCircle(self,
deltaTimeSeconds,
elapsedTimeSeconds,
distanceStillToFlyMeters,
distanceToLastFixMeters):
''' internally modified '''
initialDeltaTimeSeconds = deltaTimeSeconds
'''
build the great circle
'''
distance_radians = 2 * math.asin(math.sqrt(math.pow((math.sin((self.ptlat1_radians-self.ptlat2_radians)/2)),2) + math.cos(self.ptlat1_radians) * math.cos(self.ptlat2_radians)*math.pow((math.sin((self.ptlon1_radians-self.ptlon2_radians)/2)),2)))
''' 6371.009 represents the mean radius of the earth'''
''' shortest path distance'''
distanceMeters = EarthMeanRadiusMeters * distance_radians
#print self.className + ': computeGreatCircle shortest path distance= ' + str(distanceMeters) + ' meters'
''' init the loop index '''
index = 0
elapsedTimeSeconds = elapsedTimeSeconds
#print self.className + ': initial True Air Speed= ' + str(trueAirSpeedMetersSecond) + ' meters/second'
overflownDistanceMeters = 0.0
''' loop over the over-flown distance '''
endOfSimulation = False
while ( (endOfSimulation == False) and (overflownDistanceMeters < distanceMeters)):
''' initialization of the loop '''
if index == 0:
print ( self.className + ': initial way-point= {0}'.format(self.initialWayPoint) )
intermediateWayPoint = self.initialWayPoint
if self.aircraft.isCruiseSpeedReached():
''' speed up the computation => step = 10 seconds '''
deltaTimeSeconds = 10.0
else:
deltaTimeSeconds = initialDeltaTimeSeconds
''' fly => increase in true air speed '''
endOfSimulation, deltaDistanceMeters , altitudeMeanSeaLevelMeters = self.aircraft.fly(
elapsedTimeSeconds = elapsedTimeSeconds,
deltaTimeSeconds = deltaTimeSeconds,
distanceStillToFlyMeters = distanceStillToFlyMeters,
currentPosition = intermediateWayPoint,
distanceToLastFixMeters = distanceToLastFixMeters)
#print self.className + ': True AirSpeed= ' + str(trueAirSpeedMetersSecond) + ' meters/second'
''' cumulated over-flown distance '''
overflownDistanceMeters += deltaDistanceMeters
distanceStillToFlyMeters -= deltaDistanceMeters
distanceToLastFixMeters -= deltaDistanceMeters
fprime = overflownDistanceMeters / distanceMeters
#print self.className + ': altitude= ' + str(altitudeMeanSeaLevelMeters) + ' meters'
''' fprime is expressed as a fraction along the route from point 1 to point 2 '''
A = math.sin((1-fprime)*distance_radians) / math.sin(distance_radians)
B = math.sin(fprime*distance_radians) / math.sin(distance_radians)
x = A * math.cos(self.ptlat1_radians) * math.cos(self.ptlon1_radians) + B * math.cos(self.ptlat2_radians) * math.cos(self.ptlon2_radians)
y = A * math.cos(self.ptlat1_radians) * math.sin(self.ptlon1_radians) + B * math.cos(self.ptlat2_radians) * math.sin(self.ptlon2_radians)
z = A * math.sin(self.ptlat1_radians) + B * math.sin(self.ptlat2_radians)
newLatitudeRadians = math.atan2(z, math.sqrt(math.pow(x,2)+math.pow(y,2)))
newLongitudeRadians = math.atan2(y,x)
newlat_degrees = math.degrees(newLatitudeRadians)
newlon_degrees = math.degrees(newLongitudeRadians)
#name = 'gc-pt-{0}-{1:.2f}-Nm'.format(index, overflownDistanceMeters*Meter2NauticalMiles)
name = ''
''' new way point is built with an altitude '''
newWayPoint = WayPoint(Name = name,
LatitudeDegrees = newlat_degrees,
LongitudeDegrees = newlon_degrees,
AltitudeMeanSeaLevelMeters = altitudeMeanSeaLevelMeters)
''' update new point '''
elapsedTimeSeconds += deltaTimeSeconds
newWayPoint.setElapsedTimeSeconds(elapsedTimeSeconds)
''' build the route '''
self.addVertex(newWayPoint)
''' set new intermediate way-point '''
intermediateWayPoint = newWayPoint
''' increment index needed when adding vertex '''
index += 1
''' rename the final way point '''
intermediateWayPoint.setName(self.finalWayPoint.getName())
# minutes, seconds = divmod(elapsedTimeSeconds, 60)
# strMsg = ': passing way-point: {0} ... altitude= {1:.2f} feet ... distance= {2:.2f} nautics ... elapsed time= {3:.2f} sec ... elapsed time= {4} min {5} sec'.format(
# self.finalWayPoint.getName(),
# altitudeMeanSeaLevelMeters * Meter2Feet,
# self.computeLengthMeters()* Meter2NauticalMiles,
# elapsedTimeSeconds, int(minutes), int(seconds))
# print self.className + strMsg
print ( self.className + ': final way-point= {0}'.format(intermediateWayPoint) )
return endOfSimulation
def buildDepartureGroundRun(self,
deltaTimeSeconds,
elapsedTimeSeconds,
distanceStillToFlyMeters,
distanceToLastFixMeters):
''' build the departure ground run
'''
''' elapsedTimeSeconds in seconds '''
elapsedTimeSeconds = elapsedTimeSeconds
''' run-way end point '''
strRunWayEndPointName = self.airport.getName() + '-' + 'Rwy'+'-'+self.runway.getName()
runWayEndPoint = WayPoint (Name=strRunWayEndPointName,
LatitudeDegrees=self.runway.getLatitudeDegrees(),
LongitudeDegrees=self.runway.getLongitudeDegrees(),
AltitudeMeanSeaLevelMeters=self.airport.getFieldElevationAboveSeaLevelMeters())
''' run-way true heading '''
runwayTrueHeadingDegrees = self.runway.getTrueHeadingDegrees()
''' call base class Graph to build Climb Ramp core of the route '''
index = 0
self.addVertex(runWayEndPoint)
index += 1
''' departure ground run => initial speed is null '''
trueAirSpeedMetersSecond = 0.1
''' ground run leg distance '''
totalLegDistanceMeters = 0.0
self.aircraft.initStateVector( elapsedTimeSeconds,
trueAirSpeedMetersSecond,
self.airport.getFieldElevationAboveSeaLevelMeters())
'''
Usually, the lift-off speed is designated to be 1.2 * Vstall
at a given weight, an aircraft will rotate and climb, stall or fly at an approach to landing at approx the same CAS.
regardless of the elevation (height above sea level) , even though the true airspeed and ground-speed may differ significantly.
These V speeds are normally published as IAS rather than CAS so they can be read directly from the airspeed indicator.
'''
VStallSpeedCASKnots = self.aircraft.computeStallSpeedCasKnots()
print self.className + ': V stall Calibrated AirSpeed= {0:.2f} knots'.format(VStallSpeedCASKnots)
''' loop until Stall CAS reached '''
endOfSimulation = False
while ((endOfSimulation == False) and
( tas2cas(tas = trueAirSpeedMetersSecond ,
altitude = self.airport.getFieldElevationAboveSeaLevelMeters(),
temp='std',
speed_units = 'm/s',
alt_units = 'm') * MeterPerSecond2Knots ) < (1.2 * VStallSpeedCASKnots)):
''' initial loop index '''
if index == 1:
intermediateWayPoint = runWayEndPoint
''' fly => increase in true air speed '''
''' during ground run => all the energy is used to increase the Kinetic energy => no potential energy increase '''
endOfSimulation, deltaDistanceMeters , altitudeMeters = self.aircraft.fly(
elapsedTimeSeconds = elapsedTimeSeconds,
deltaTimeSeconds = deltaTimeSeconds,
distanceStillToFlyMeters = distanceStillToFlyMeters,
currentPosition = intermediateWayPoint,
distanceToLastFixMeters = distanceToLastFixMeters)
trueAirSpeedMetersSecond = self.aircraft.getCurrentTrueAirSpeedMetersSecond()
assert (((self.airport.getFieldElevationAboveSeaLevelMeters() - 10.0) <= altitudeMeters) and
( altitudeMeters <= (self.airport.getFieldElevationAboveSeaLevelMeters() + 10.0)))
#print self.className + ': delta distance= ' + str(deltaDistanceMeters) + ' meters'
# name of the next point
totalLegDistanceMeters += deltaDistanceMeters
distanceStillToFlyMeters -= deltaDistanceMeters
distanceToLastFixMeters -= deltaDistanceMeters
Name = ''
if index == 1:
Name = 'ground-run-pt-{0}-{1:.2f}-meters'.format(index-1, totalLegDistanceMeters)
#bearingDegrees = math.fmod ( runwayTrueHeadingDegrees + 180.0 , 360.0 )
bearingDegrees = runwayTrueHeadingDegrees
newIntermediateWayPoint = intermediateWayPoint.getWayPointAtDistanceBearing(Name = Name,
DistanceMeters = deltaDistanceMeters,
BearingDegrees = bearingDegrees)
''' during the ground run - altitude = airport field elevation '''
newIntermediateWayPoint.setAltitudeMeanSeaLevelMeters(self.airport.getFieldElevationAboveSeaLevelMeters())
''' update route waypoint '''
elapsedTimeSeconds += deltaTimeSeconds
newIntermediateWayPoint.setElapsedTimeSeconds(elapsedTimeSeconds)
''' insert in the route '''
self.addVertex(newIntermediateWayPoint)
''' copy the intermediate way-point '''
intermediateWayPoint = newIntermediateWayPoint
''' increment the index '''
index += 1
''' rename last point as take-off '''
intermediateWayPoint.setName(Name = 'Take-Off-{0:.2f}-meters'.format(totalLegDistanceMeters))