dec = xxtea.xxbtea(data, -2,
"AABBCCDDEE0123456789AABBCCDDEEFF")
self.send(dec, "outbox")
if not self.anyReady():
self.pause()
yield 1
self.send(self.recv("control"), "signal")
class echoer(Axon.Component.component):
def main(self):
count = 0
while 1:
while self.dataReady("inbox"):
data = self.recv("inbox")
print data, "count:", count
count = count + 1
self.pause()
yield 1
if __name__ == "__main__":
pipeline(
RateControlledFileReader("../AM/KPIFramework/SelfishTriangle.jpg",
readmode="bytes",
rate=100000,
chunksize=8),
Encryptor("12345678901234567890123456789012"),
Decryptor("12345678901234567890123456789012"),
SimpleFileWriter("SelfishTriangle-dec.jpg")).run()
if __name__ == "__main__":
from Kamaelia.Chassis.Pipeline import Pipeline
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.UI.Pygame.VideoOverlay import VideoOverlay
from Kamaelia.Audio.PyMedia.Output import Output
from Kamaelia.Chassis.Carousel import Carousel
from Kamaelia.Chassis.Graphline import Graphline
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.File.Writing import SimpleFileWriter
print "Reading in WAV file, parsing it, then writing it out as test.wav ..."
Graphline(
READ=RateControlledFileReader(
"/usr/share/sounds/alsa/Front_Center.wav",
readmode="bytes",
rate=1000000),
PARSE=WAVParser(),
ENC=Carousel(lambda meta: WAVWriter(**meta)),
WRITE=SimpleFileWriter("test.wav"),
linkages={
("READ", "outbox"): ("PARSE", "inbox"),
("PARSE", "outbox"): ("ENC", "inbox"),
("PARSE", "all_meta"): ("ENC", "next"),
("ENC", "outbox"): ("WRITE", "inbox"),
("READ", "signal"): ("PARSE", "control"),
("PARSE", "signal"): ("ENC", "control"),
("ENC", "signal"): ("WRITE", "control"),
},
).run()
print
sys.exit(1)
channelsConfFile = sys.argv[1]
channelName = sys.argv[2].upper().strip()
outFileName = sys.argv[3]
def chooseChannelName((name, params, ids)):
if name == channelName:
return (name, params, ids)
else:
return None
Pipeline(
RateControlledFileReader(channelsConfFile,
readmode="lines",
rate=1000,
chunksize=1),
ParseChannelsConf(),
PureTransformer(chooseChannelName),
Graphline(Router=TwoWaySplitter(),
DVBReceiver=Carousel(
lambda (_, (freq, params), __): Tuner(freq, params)),
PidReq=PureTransformer(lambda (n, (f, p), pids): (
"ADD", [pids["audio_pid"], pids["video_pid"]])),
linkages={
("", "inbox"): ("Router", "inbox"),
("Router", "outbox"): ("DVBReceiver", "next"),
("Router", "outbox2"): ("PidReq", "inbox"),
("PidReq", "outbox"): ("DVBReceiver", "inbox"),
("DVBReceiver", "outbox"): ("", "outbox"),
}),
from Kamaelia.Internet.TCPClient import TCPClient
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.Audio.Codec.PyMedia.Decoder import Decoder
from Kamaelia.Audio.PyMedia.Resample import Resample
import sys
try:
if "--help" in sys.argv:
sys.stderr.write("Usage:\n ./MP3Player filename host port\n\n")
sys.exit(0)
filename = sys.argv[1]
rhost = sys.argv[2]
rport = int(sys.argv[3])
except:
sys.stderr.write("Usage:\n ./MP3Player filename host port\n\n")
sys.exit(1)
# rhost = "127.0.0.1"
# rport=1500
Pipeline(
RateControlledFileReader(filename, readmode="bytes", rate=160*1024/8,chunksize=1024),
Decoder("mp3"),
Resample(sample_rate=44100, channels=2,
to_sample_rate=8000, to_channels=1),
SpeexEncode(3),
Entuple(prefix=["SOUND"],postfix=[]),
tokenlists_to_lines(),
TCPClient(host=rhost,port=rport),
).run()
from Kamaelia.File.Writing import SimpleFileWriter
TS_FILE = "/home/matteh/dvb/2008-05-16 11.27.13 MUX1_EIT_TOT_TDT.ts"
# def AddInVersion():
# def transf(x):
# x["version"] = 0
# return x
# return PureTransformer(transf)
print "run a diff over the two output files to compare the results"
splitter=PlugSplitter()
Pipeline(
RateControlledFileReader(TS_FILE, readmode="bytes", rate=1000*1000, chunksize=188),
DVB_SoftDemuxer( {0x12:["outbox"]} ),
ReassemblePSITables(),
ParseEventInformationTable_Subset( \
actual_presentFollowing = True,
other_presentFollowing = True,
actual_schedule = True,
other_schedule = True,
),
splitter
).activate()
Plug(splitter, Pipeline(
PrettifyEventInformationTable(),
SimpleFileWriter("original_eit_parsed.text"),
)).activate()
# (1) Kamaelia Contributors are listed in the AUTHORS file and at
# http://www.kamaelia.org/AUTHORS - please extend this file,
# not this notice.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -------------------------------------------------------------------------
from Audio.PyMedia.Output import Output
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.Chassis.Pipeline import Pipeline
Pipeline(
RateControlledFileReader("/home/matteh/music/Radiohead - Creep.wav",
readmode="bytes",
rate=44100 * 2 * 2,
chunksize=1024),
Output(sample_rate=44100, channels=2, format="S16_LE"),
).run()
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
from Kamaelia.Chassis.Pipeline import Pipeline
from Kamaelia.Internet.Multicast_transceiver import Multicast_transceiver
from Kamaelia.Protocol.SimpleReliableMulticast import SRM_Sender
from Kamaelia.Protocol.Packetise import MaxSizePacketiser
from Kamaelia.File.Reading import RateControlledFileReader
path = "/home/jlei/Kamaelia/files/finite.mp3"
ip = "224.0.0.1"
Pipeline(
RateControlledFileReader(path, readmode="bytes", rate=128000 / 8),
SRM_Sender(),
MaxSizePacketiser(),
Multicast_transceiver("0.0.0.0", 0, ip, 1600),
).run()
#This comment added is useless.
yield _
def write_frame(self, frame):
"""\
Generator.
Writes out YUV4MPEG format frame marker and data.
"""
for _ in self.sendoutbox("FRAME\x0a"):
yield _
for component in frame['yuv']:
for _ in self.sendoutbox(component):
yield _
__kamaelia_components__ = ( YUV4MPEGToFrame, FrameToYUV4MPEG, )
if __name__ == "__main__":
from Kamaelia.Chassis.Pipeline import Pipeline
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.UI.Pygame.VideoOverlay import VideoOverlay
Pipeline( RateControlledFileReader("/data/stream.yuv",readmode="bytes",rate=25*(608256+128)),
YUV4MPEGToFrame(),
FrameToYUV4MPEG(),
YUV4MPEGToFrame(),
VideoOverlay(),
).run()
for box in outboxes.keys():
self.postoffice.deregisterlinkage(thelinkage=linkages[box])
self.deleteOutbox(outboxes[box])
del self.actors[actorName]
def exeuntAll(self, includingNarrator=False):
self.send("EXIT ALL...\n", "outbox")
for actor in self.actors.keys():
if includingNarrator or actor != "NARRATOR":
for retval in self.exeunt(actor):
yield retval
if __name__ == "__main__":
from Kamaelia.Util.PipelineComponent import pipeline
from Kamaelia.File.Reading import RateControlledFileReader
from Kamaelia.Util.ConsoleEcho import consoleEchoer
pipeline(
RateControlledFileReader("../CE/twelfthnight.txt",
readmode="lines",
rate=50,
chunksize=1),
demodulation(),
error_correction(),
demultiplexing(),
director("127.0.0.1", "#theglobe"),
consoleEchoer(),
).run()
("", "inbox"): ("splitter", "inbox"),
("", "control"): ("splitter", "control"),
("splitter", "outbox"): ("", "outbox"),
("splitter", "signal"): ("", "signal")
},
**plugs)
#Pipeline( FormattedProfiler(10.0, 1.0),
# ConsoleEchoer(),
# ).activate()
Pipeline(
RateControlledFileReader(TS_FILE,
"bytes",
rate=2500000,
chunksize=188,
allowchunkaggregation=True),
# Tee(
# Pipeline( DVB_SoftDemuxer({0x14 : ["outbox"]}),
# ReassemblePSITables(),
# ParseTimeAndDateTable(),
# PrettifyTimeAndDateTable(),
# ConsoleEchoer(),
# ),
# ),
DVB_SoftDemuxer({0x12: ["outbox"]}),
ReassemblePSITables(),
ParseEventInformationTable_Subset(actual_presentFollowing=True),
PrettifyEventInformationTable(),
ConsoleEchoer()).run()
def rfa_factory(_):
return RateControlledFileReader("junction.ts",
readmode="bytes",
rate=18000000 / 8,
chunksize=2048)
def create_xml_parser(self):
return Pipeline(RateControlledFileReader(self._fileName),
SimpleXMLParser())
edit["right"] = int(attrs["x2"])
edit["bottom"] = int(attrs["y2"])
elif self.ifIs("chars"):
pass
#assert( contains["start","end","left","top","right","bottom"], edit)
yield edit
elif self.ifIs("/element", "EDL"):
return
def ifIs(self, *args):
return self.token[:len(args)] == args
if __name__ == "__main__":
from Kamaelia.Chassis.Pipeline import Pipeline
from Kamaelia.Chassis.Graphline import Graphline
from Kamaelia.Util.Console import ConsoleEchoer
from XMLParser import XMLParser
from Kamaelia.File.Reading import RateControlledFileReader
Pipeline(
RateControlledFileReader("TestEDL.xml", readmode="lines",
rate=1000000),
XMLParser(),
EDLParser(),
ConsoleEchoer(),
).run()
