def _GenSources(self):
Logger.Debug(2, "Generate %s ..." % DT.TAB_SOURCES)
#
# Get all SourceFiles
#
SourceObj = self.Parser.InfSourcesSection.Sources
DataList = SourceObj.keys()
#
# Go through each arch
#
SourceList = []
for Key in DataList:
SourceData = SourceObj[Key]
for Item in SourceData:
SourceFile = Item.GetSourceFileName()
Family = Item.GetFamily()
FeatureFlag = Item.GetFeatureFlagExp()
SupArchList = ConvertArchList(Item.GetSupArchList())
SupArchList.sort()
Source = SourceFileObject()
Source.SetSourceFile(SourceFile)
Source.SetFamily(Family)
Source.SetFeatureFlag(FeatureFlag)
Source.SetSupArchList(SupArchList)
SourceList.append(Source)
self.SetSourceFileList(self.GetSourceFileList() + SourceList)
def _GenSources(self):
Logger.Debug(2, "Generate %s ..." % DT.TAB_SOURCES)
#
# Get all SourceFiles
#
SourceObj = self.Parser.InfSourcesSection.Sources
DataList = SourceObj.keys()
#
# Go through each arch
#
SourceList = []
for Key in DataList:
SourceData = SourceObj[Key]
for Item in SourceData:
SourceFile = Item.GetSourceFileName()
Family = Item.GetFamily()
FeatureFlag = Item.GetFeatureFlagExp()
SupArchList = ConvertArchList(Item.GetSupArchList())
SupArchList.sort()
Source = SourceFileObject()
Source.SetSourceFile(SourceFile)
Source.SetFamily(Family)
Source.SetFeatureFlag(FeatureFlag)
Source.SetSupArchList(SupArchList)
SourceList.append(Source)
self.SetSourceFileList(self.GetSourceFileList() + SourceList)
def GenBinaryData(BinaryData, BinaryObj, BinariesDict, AsBuildIns,
BinaryFileObjectList, SupArchList, BinaryModule):
if BinaryModule:
pass
OriSupArchList = SupArchList
for Item in BinaryData:
ItemObj = BinaryObj[Item][0][0]
if ItemObj.GetType(
) not in DT.BINARY_FILE_TYPE_UI_LIST + DT.BINARY_FILE_TYPE_VER_LIST:
TagName = ItemObj.GetTagName()
Family = ItemObj.GetFamily()
else:
TagName = ''
Family = ''
FFE = ItemObj.GetFeatureFlagExp()
#
# If have architecturie specified, then use the specified architecturie;
# If the section tag does not have an architecture modifier or the modifier is "common" (case in-sensitive),
# and the VALID_ARCHITECTURES comment exists, the list from the VALID_ARCHITECTURES comment
# can be used for the attribute.
# If both not have VALID_ARCHITECTURE comment and no architecturie specified, then keep it empty.
#
SupArchList = ConvertArchList(ItemObj.GetSupArchList())
SupArchList.sort()
if len(SupArchList) == 1 and SupArchList[0] == 'COMMON':
if not (len(OriSupArchList) == 1 or OriSupArchList[0] == 'COMMON'):
SupArchList = OriSupArchList
else:
SupArchList = ['COMMON']
FileNameObj = CommonObject.FileNameObject()
FileNameObj.SetFileType(ItemObj.GetType())
FileNameObj.SetFilename(ItemObj.GetFileName())
FileNameObj.SetFeatureFlag(FFE)
FileNameObj.SetSupArchList(SupArchList)
FileNameList = [FileNameObj]
BinaryFile = BinaryFileObject()
BinaryFile.SetFileNameList(FileNameList)
BinaryFile.SetAsBuiltList(AsBuildIns)
BinaryFileObjectList.append(BinaryFile)
SupArchStr = ' '.join(SupArchList)
Key = (ItemObj.GetFileName(), ItemObj.GetType(), FFE, SupArchStr)
ValueItem = (ItemObj.GetTarget(), Family, TagName, '')
if Key in BinariesDict:
ValueList = BinariesDict[Key]
ValueList.append(ValueItem)
BinariesDict[Key] = ValueList
else:
BinariesDict[Key] = [ValueItem]
return BinariesDict, AsBuildIns, BinaryFileObjectList
def GenBinaryData(BinaryData, BinaryObj, BinariesDict, AsBuildIns, BinaryFileObjectList, SupArchList, BinaryModule):
if BinaryModule:
pass
OriSupArchList = SupArchList
for Item in BinaryData:
ItemObj = BinaryObj[Item][0][0]
if ItemObj.GetType() not in DT.BINARY_FILE_TYPE_UI_LIST + DT.BINARY_FILE_TYPE_VER_LIST:
TagName = ItemObj.GetTagName()
Family = ItemObj.GetFamily()
else:
TagName = ''
Family = ''
FFE = ItemObj.GetFeatureFlagExp()
#
# If have architecturie specified, then use the specified architecturie;
# If the section tag does not have an architecture modifier or the modifier is "common" (case in-sensitive),
# and the VALID_ARCHITECTURES comment exists, the list from the VALID_ARCHITECTURES comment
# can be used for the attribute.
# If both not have VALID_ARCHITECTURE comment and no architecturie specified, then keep it empty.
#
SupArchList = ConvertArchList(ItemObj.GetSupArchList())
SupArchList.sort()
if len(SupArchList) == 1 and SupArchList[0] == 'COMMON':
if not (len(OriSupArchList) == 1 or OriSupArchList[0] == 'COMMON'):
SupArchList = OriSupArchList
else:
SupArchList = ['COMMON']
FileNameObj = CommonObject.FileNameObject()
FileNameObj.SetFileType(ItemObj.GetType())
FileNameObj.SetFilename(ItemObj.GetFileName())
FileNameObj.SetFeatureFlag(FFE)
FileNameObj.SetSupArchList(SupArchList)
FileNameList = [FileNameObj]
BinaryFile = BinaryFileObject()
BinaryFile.SetFileNameList(FileNameList)
BinaryFile.SetAsBuiltList(AsBuildIns)
BinaryFileObjectList.append(BinaryFile)
SupArchStr = ' '.join(SupArchList)
Key = (ItemObj.GetFileName(), ItemObj.GetType(), FFE, SupArchStr)
ValueItem = (ItemObj.GetTarget(), Family, TagName, '')
if Key in BinariesDict:
ValueList = BinariesDict[Key]
ValueList.append(ValueItem)
BinariesDict[Key] = ValueList
else:
BinariesDict[Key] = [ValueItem]
return BinariesDict, AsBuildIns, BinaryFileObjectList
def GenBinaryData(BinaryData, BinaryObj, BinariesDict, AsBuildIns, BinaryFileObjectList, \
SupArchList, BinaryModule, DecObjList=None):
if BinaryModule:
pass
OriSupArchList = SupArchList
for Item in BinaryData:
ItemObj = BinaryObj[Item][0][0]
if ItemObj.GetType() not in DT.BINARY_FILE_TYPE_UI_LIST + DT.BINARY_FILE_TYPE_VER_LIST:
TagName = ItemObj.GetTagName()
Family = ItemObj.GetFamily()
else:
TagName = ''
Family = ''
FFE = ItemObj.GetFeatureFlagExp()
#
# If have architecturie specified, then use the specified architecturie;
# If the section tag does not have an architecture modifier or the modifier is "common" (case in-sensitive),
# and the VALID_ARCHITECTURES comment exists, the list from the VALID_ARCHITECTURES comment
# can be used for the attribute.
# If both not have VALID_ARCHITECTURE comment and no architecturie specified, then keep it empty.
#
SupArchList = ConvertArchList(ItemObj.GetSupArchList())
SupArchList.sort()
if len(SupArchList) == 1 and SupArchList[0] == 'COMMON':
if not (len(OriSupArchList) == 1 or OriSupArchList[0] == 'COMMON'):
SupArchList = OriSupArchList
else:
SupArchList = ['COMMON']
FileNameObj = CommonObject.FileNameObject()
FileNameObj.SetFileType(ItemObj.GetType())
FileNameObj.SetFilename(ItemObj.GetFileName())
FileNameObj.SetFeatureFlag(FFE)
#
# Get GUID value of the GUID CName in the DEC file
#
if ItemObj.GetType() == DT.SUBTYPE_GUID_BINARY_FILE_TYPE:
if not CheckGuidRegFormat(ItemObj.GetGuidValue()):
if not DecObjList:
if DT.TAB_HORIZON_LINE_SPLIT in ItemObj.GetGuidValue() or \
DT.TAB_COMMA_SPLIT in ItemObj.GetGuidValue():
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_DECPARSE_DEFINE_PKGGUID,
ExtraData=ItemObj.GetGuidValue(),
RaiseError=True)
else:
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_UNI_SUBGUID_VALUE_DEFINE_DEC_NOT_FOUND % \
(ItemObj.GetGuidValue()),
RaiseError=True)
else:
for DecObj in DecObjList:
for GuidObj in DecObj.GetGuidList():
if GuidObj.GetCName() == ItemObj.GetGuidValue():
FileNameObj.SetGuidValue(GuidObj.GetGuid())
break
if not FileNameObj.GetGuidValue():
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_DECPARSE_CGUID_NOT_FOUND % \
(ItemObj.GetGuidValue()),
RaiseError=True)
else:
FileNameObj.SetGuidValue(ItemObj.GetGuidValue().strip())
FileNameObj.SetSupArchList(SupArchList)
FileNameList = [FileNameObj]
BinaryFile = BinaryFileObject()
BinaryFile.SetFileNameList(FileNameList)
BinaryFile.SetAsBuiltList(AsBuildIns)
BinaryFileObjectList.append(BinaryFile)
SupArchStr = ' '.join(SupArchList)
Key = (ItemObj.GetFileName(), ItemObj.GetType(), FFE, SupArchStr)
ValueItem = (ItemObj.GetTarget(), Family, TagName, '')
if Key in BinariesDict:
ValueList = BinariesDict[Key]
ValueList.append(ValueItem)
BinariesDict[Key] = ValueList
else:
BinariesDict[Key] = [ValueItem]
return BinariesDict, AsBuildIns, BinaryFileObjectList
def GenBinaryData(BinaryData, BinaryObj, BinariesDict, AsBuildIns, BinaryFileObjectList, \
SupArchList, BinaryModule, DecObjList=None):
if BinaryModule:
pass
OriSupArchList = SupArchList
for Item in BinaryData:
ItemObj = BinaryObj[Item][0][0]
if ItemObj.GetType(
) not in DT.BINARY_FILE_TYPE_UI_LIST + DT.BINARY_FILE_TYPE_VER_LIST:
TagName = ItemObj.GetTagName()
Family = ItemObj.GetFamily()
else:
TagName = ''
Family = ''
FFE = ItemObj.GetFeatureFlagExp()
#
# If have architecturie specified, then use the specified architecturie;
# If the section tag does not have an architecture modifier or the modifier is "common" (case in-sensitive),
# and the VALID_ARCHITECTURES comment exists, the list from the VALID_ARCHITECTURES comment
# can be used for the attribute.
# If both not have VALID_ARCHITECTURE comment and no architecturie specified, then keep it empty.
#
SupArchList = ConvertArchList(ItemObj.GetSupArchList())
SupArchList.sort()
if len(SupArchList) == 1 and SupArchList[0] == 'COMMON':
if not (len(OriSupArchList) == 1 or OriSupArchList[0] == 'COMMON'):
SupArchList = OriSupArchList
else:
SupArchList = ['COMMON']
FileNameObj = CommonObject.FileNameObject()
FileNameObj.SetFileType(ItemObj.GetType())
FileNameObj.SetFilename(ItemObj.GetFileName())
FileNameObj.SetFeatureFlag(FFE)
#
# Get GUID value of the GUID CName in the DEC file
#
if ItemObj.GetType() == DT.SUBTYPE_GUID_BINARY_FILE_TYPE:
if not CheckGuidRegFormat(ItemObj.GetGuidValue()):
if not DecObjList:
if DT.TAB_HORIZON_LINE_SPLIT in ItemObj.GetGuidValue() or \
DT.TAB_COMMA_SPLIT in ItemObj.GetGuidValue():
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_DECPARSE_DEFINE_PKGGUID,
ExtraData=ItemObj.GetGuidValue(),
RaiseError=True)
else:
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_UNI_SUBGUID_VALUE_DEFINE_DEC_NOT_FOUND % \
(ItemObj.GetGuidValue()),
RaiseError=True)
else:
for DecObj in DecObjList:
for GuidObj in DecObj.GetGuidList():
if GuidObj.GetCName() == ItemObj.GetGuidValue():
FileNameObj.SetGuidValue(GuidObj.GetGuid())
break
if not FileNameObj.GetGuidValue():
Logger.Error("\nMkPkg",
FORMAT_INVALID,
ST.ERR_DECPARSE_CGUID_NOT_FOUND % \
(ItemObj.GetGuidValue()),
RaiseError=True)
else:
FileNameObj.SetGuidValue(ItemObj.GetGuidValue().strip())
FileNameObj.SetSupArchList(SupArchList)
FileNameList = [FileNameObj]
BinaryFile = BinaryFileObject()
BinaryFile.SetFileNameList(FileNameList)
BinaryFile.SetAsBuiltList(AsBuildIns)
BinaryFileObjectList.append(BinaryFile)
SupArchStr = ' '.join(SupArchList)
Key = (ItemObj.GetFileName(), ItemObj.GetType(), FFE, SupArchStr)
ValueItem = (ItemObj.GetTarget(), Family, TagName, '')
if Key in BinariesDict:
ValueList = BinariesDict[Key]
ValueList.append(ValueItem)
BinariesDict[Key] = ValueList
else:
BinariesDict[Key] = [ValueItem]
return BinariesDict, AsBuildIns, BinaryFileObjectList
