def draw(self):
"""
Render interpreter display buffer to the game screen.
:return: None.
:rtype: None
"""
if self.cpu.frame_ready:
for index, value in enumerate(reversed(self.display.ravel())):
r = index * 3
g = r + 1
b = r + 2
pixel_color = self._pixel_color(value)
self.temp_display[r] = pixel_color
self.temp_display[g] = pixel_color
self.temp_display[b] = pixel_color
glClearColor(0, 0, 0, 1)
glClear(GL_COLOR_BUFFER_BIT)
glDrawPixels(*(self.display_width, self.display_height), GL_RGB, GL_UNSIGNED_BYTE, self.temp_display)
# Update display.
pygame.display.flip()
self.cpu.frame_ready = False
def drawText(position, textString):
font = pygame.font.Font(None, 64)
textSurface = font.render(textString, True, (255, 255, 255, 255))
textData = pygame.image.tostring(textSurface, "RGBA", True)
glRasterPos3d(*position)
glDrawPixels(textSurface.get_width(), textSurface.get_height(), GL_RGBA,
GL_UNSIGNED_BYTE, textData)
def draw_conf_corner_bg_image(self, pos = None): #bruce 070626 (pos argument is just for development & debugging)
"""
Redraw the previously grabbed conf_corner_bg_image,
in the same place from which it was grabbed,
or in the specified place (lower left corner of pos, in OpenGL window coords).
Note: this modifies the OpenGL raster position.
"""
if not self._conf_corner_bg_image_data:
print "self._conf_corner_bg_image_data not yet assigned"
else:
subwidth, subheight, width, height, gl_format, gl_type, image = self._conf_corner_bg_image_data
if width != self.width or height != self.height:
# I don't know if this can ever happen; if it can, caller might need
# to detect this itself and do a full redraw.
# (Or we might make this method return a boolean to indicate it.)
print "can't draw self._conf_corner_bg_image_data -- glpane got resized" ###
else:
if pos is None:
pos = (width - subwidth, height - subheight)
x, y = pos
self._set_raster_pos(x, y)
glDisable(GL_DEPTH_TEST) # otherwise it can be obscured by prior drawing into depth buffer
# Note: doing more disables would speed up glDrawPixels,
# but that doesn't matter unless we do it many times per frame.
glDrawPixels(subwidth, subheight, gl_format, gl_type, image)
glEnable(GL_DEPTH_TEST)
pass
return
def draw_conf_corner_bg_image(
self,
pos=None
): #bruce 070626 (pos argument is just for development & debugging)
"""
Redraw the previously grabbed conf_corner_bg_image,
in the same place from which it was grabbed,
or in the specified place (lower left corner of pos, in OpenGL window coords).
Note: this modifies the OpenGL raster position.
"""
if not self._conf_corner_bg_image_data:
print "self._conf_corner_bg_image_data not yet assigned"
else:
subwidth, subheight, width, height, gl_format, gl_type, image = self._conf_corner_bg_image_data
if width != self.width or height != self.height:
# I don't know if this can ever happen; if it can, caller might need
# to detect this itself and do a full redraw.
# (Or we might make this method return a boolean to indicate it.)
print "can't draw self._conf_corner_bg_image_data -- glpane got resized" ###
else:
if pos is None:
pos = (width - subwidth, height - subheight)
x, y = pos
self._set_raster_pos(x, y)
glDisable(
GL_DEPTH_TEST
) # otherwise it can be obscured by prior drawing into depth buffer
# Note: doing more disables would speed up glDrawPixels,
# but that doesn't matter unless we do it many times per frame.
glDrawPixels(subwidth, subheight, gl_format, gl_type, image)
glEnable(GL_DEPTH_TEST)
pass
return
def draw_gui(self):
logo = self.logo
logo_bytes = self.logo_bytes
menubar_height = logo.size[1] + 4
width = glutGet(GLUT_WINDOW_WIDTH)
height = glutGet(GLUT_WINDOW_HEIGHT)
glMatrixMode(GL_PROJECTION)
glPushMatrix()
glLoadIdentity()
glOrtho(0.0, width, height, 0.0, -1.0, 10.0)
glMatrixMode(GL_MODELVIEW)
glLoadIdentity()
#glDisable(GL_CULL_FACE)
glShadeModel(GL_SMOOTH)
glClear(GL_DEPTH_BUFFER_BIT)
# Top bar
#glBegin(GL_QUADS)
#glColor3f(0.14, 0.49, 0.87)
#glVertex2f(0, 0)
#glVertex2f(width - logo.size[0] - 10, 0)
#glVertex2f(width - logo.size[0] - 10, menubar_height)
#glVertex2f(0, menubar_height)
#glEnd()
try:
self.draw_colour_legend()
except TypeError:
pass
glPushMatrix()
glLoadIdentity()
glRasterPos(4, logo.size[1] + 4)
glDrawPixels(logo.size[0], logo.size[1], GL_RGB, GL_UNSIGNED_BYTE, logo_bytes)
glPopMatrix()
glMatrixMode(GL_PROJECTION)
glPopMatrix()
glMatrixMode(GL_MODELVIEW)
self.colourist.now_text()
#draw_text_2d("{0}ns".format(int(self.min_hit_time)), width - 80, 20)
#draw_text_2d("{0}ns".format(int(self.max_hit_time)), width - 80, height - menubar_height - 10)
#draw_text_2d("{0}ns".format(int((self.min_hit_time + self.max_hit_time) / 2)), width - 80, int(height/2))
if self.show_help:
self.display_help()
if self.show_info:
self.display_info()
def main(path=None):
glutInit(sys.argv)
if sys.platform == 'darwin':
if not path:
path = dialog()
if not path:
sys.exit(0)
glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE)
glutInitWindowPosition(0, 0)
glutInitWindowSize(730, 650)
win = glutCreateWindow(b'MIDI Player')
(width, height, img) = read_image('mixer.ppm')
glPixelStorei(GL_UNPACK_ALIGNMENT, 1)
rbo = c_uint(int(glGenRenderbuffersEXT(1)))
glBindRenderbufferEXT(GL_RENDERBUFFER_EXT, rbo)
glRenderbufferStorageEXT(GL_RENDERBUFFER_EXT, GL_RGB, width, height)
fbo = c_uint(int(glGenFramebuffersEXT(1)))
glBindFramebufferEXT(GL_READ_FRAMEBUFFER_EXT, fbo)
glFramebufferRenderbufferEXT(GL_READ_FRAMEBUFFER_EXT,
GL_COLOR_ATTACHMENT0_EXT,
GL_RENDERBUFFER_EXT, rbo)
glBindFramebufferEXT(GL_DRAW_FRAMEBUFFER_EXT, fbo)
glClear(GL_COLOR_BUFFER_BIT)
glDrawPixels(width, height, GL_RGB, GL_UNSIGNED_BYTE, img)
glBindFramebufferEXT(GL_DRAW_FRAMEBUFFER_EXT, 0)
player = Player(win, path, width, height)
glutDisplayFunc(player.display_func)
glutKeyboardFunc(player.keyboard_func)
glutMouseFunc(player.mouse_func)
glutMotionFunc(player.motion_func)
glutIdleFunc(player.process_events)
submenus = []
for instrument in range(128):
if instrument % 8 == 0:
submenus.append([families[instrument // 8],
glutCreateMenu(player.change_instrument)])
glutAddMenuEntry(instruments[instrument].encode('ascii'), instrument)
glutCreateMenu(player.change_instrument)
for family, submenu in submenus:
glutAddSubMenu(family.encode('ascii'), submenu)
glutAttachMenu(GLUT_RIGHT_BUTTON)
glutMainLoop()
def release(self):
# Restore viewport
if self.push_viewport:
glPopAttrib()
# Copy current buffer into fbo texture
set_texture(self.texture, target=GL_TEXTURE_2D)
glReadBuffer(GL_BACK)
glCopyTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, 0, 0, self.size[0], self.size[1])
# Restore old buffer
w = pymt.getWindow()
glDrawPixels(w.width, w.height, GL_RGBA, GL_UNSIGNED_BYTE, self.pixels)
glPopAttrib()
super(SoftwareFbo, self).release()
def release(self):
# Restore viewport
if self.push_viewport:
glPopAttrib()
# Copy current buffer into fbo texture
set_texture(self.texture, target=GL_TEXTURE_2D)
glReadBuffer(GL_BACK)
glCopyTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, 0, 0, self.size[0], self.size[1])
# Restore old buffer
w = pymt.getWindow()
glDrawPixels(w.width, w.height, GL_RGBA, GL_UNSIGNED_BYTE, self.pixels)
glPopAttrib()
super(SoftwareFbo, self).release()
def paintGL(self):
if self.opengl_data is None:
glClear(GL.GL_COLOR_BUFFER_BIT)
else:
if self.opengl_resize and self.opengl_keep_aspect:
x_scale = self.width() / float(self.opengl_width)
y_scale = self.height() / float(self.opengl_height)
scale = min(x_scale, y_scale)
if x_scale > y_scale:
glRasterPos2f(-self.opengl_width * scale / self.width(), -1)
else:
glRasterPos2f(-1, -self.opengl_height * scale / self.height())
else:
glRasterPos2f(-1, -1)
glDrawPixels(self.opengl_width, self.opengl_height, self.opengl_format, self.opengl_dtype, self.opengl_data)
def draw_gui(self):
menubar_height = logo.size[1] + 4
width = glutGet(GLUT_WINDOW_WIDTH)
height = glutGet(GLUT_WINDOW_HEIGHT)
glMatrixMode(GL_PROJECTION)
glPushMatrix()
glLoadIdentity()
glOrtho(0.0, width, height, 0.0, -1.0, 10.0)
glMatrixMode(GL_MODELVIEW)
glLoadIdentity()
glDisable(GL_CULL_FACE)
glClear(GL_DEPTH_BUFFER_BIT)
glBegin(GL_QUADS)
glColor3f(0.14, 0.49, 0.87)
glVertex2f(0, 0)
glVertex2f(width - logo.size[0] - 10, 0)
glVertex2f(width - logo.size[0] - 10, menubar_height)
glVertex2f(0, menubar_height)
glEnd()
glPushMatrix()
glLoadIdentity()
glRasterPos(width - logo.size[0] - 4, logo.size[1] + 2)
glDrawPixels(logo.size[0], logo.size[1], GL_RGB, GL_UNSIGNED_BYTE, logo_bytes)
glPopMatrix()
glMatrixMode(GL_PROJECTION)
glPopMatrix()
glMatrixMode(GL_MODELVIEW)
glColor3f(1.0, 1.0, 1.0)
draw_text_2d("FPS: {0:.1f}\nTime: {1:.0f} ns"
.format(self.clock.fps, self.clock.time),
10, 30)
if self.show_help:
self.display_help()
if self.show_info:
self.display_info()
def draw_gui(self):
logo = self.logo
logo_bytes = self.logo_bytes
width = glutGet(GLUT_WINDOW_WIDTH)
height = glutGet(GLUT_WINDOW_HEIGHT)
glMatrixMode(GL_PROJECTION)
glPushMatrix()
glLoadIdentity()
glOrtho(0.0, width, height, 0.0, -1.0, 10.0)
glMatrixMode(GL_MODELVIEW)
glLoadIdentity()
glShadeModel(GL_SMOOTH)
glClear(GL_DEPTH_BUFFER_BIT)
try:
self.draw_colour_legend()
except TypeError:
pass
glPushMatrix()
glLoadIdentity()
glRasterPos(4, logo.size[1] + 4)
glDrawPixels(logo.size[0], logo.size[1], GL_RGB, GL_UNSIGNED_BYTE,
logo_bytes)
glPopMatrix()
glMatrixMode(GL_PROJECTION)
glPopMatrix()
glMatrixMode(GL_MODELVIEW)
self.colourist.now_text()
if self.show_help:
self.display_help()
if self.show_info:
self.display_info()
def _gldraw(self):
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)
buf = np.asarray(self._screenbuffer)[::-1, :]
glDrawPixels(COLS, ROWS, GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, buf)
glFlush()
def _gldraw(self):
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)
buf = np.asarray(self.renderer._screenbuffer)[::-1, :]
glDrawPixels(COLS, ROWS, GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, buf)
glFlush()
def _draw_saved_bg_image(self):
"""
"""
print "_draw_saved_bg_image", self._print_data()
sys.stdout.flush()
assert self._cached_bg_color_image is not None
w = _trim(self.width)
h = _trim(self.height)
glDisable(GL_DEPTH_TEST) # probably a speedup
glDisable(GL_LIGHTING)
glDisable(GL_TEXTURE_2D) # probably already the NE1 default (if so, doesn't matter here)
# Note: doing more disables might well speed up glDrawPixels;
# don't know whether that matters.
color_image = self._cached_bg_color_image
depth_image = self._cached_bg_depth_image
# draw the color image part (review: does this also modify the depth buffer?)
self._set_raster_pos(0, 0)
if 0 and 'kluge - draw depth as color':
glDrawPixels(w, h, GL_RED, _GL_TYPE_FOR_DEPTH, depth_image)
else:
glDrawPixels(w, h, _GL_FORMAT_FOR_COLOR, GL_UNSIGNED_BYTE, color_image)
# draw the depth image part; ###BUG: this seems to replace all colors with blue... fixed below
self._set_raster_pos(0, 0) # adding this makes the all-gray bug slightly less bad
glClear(GL_DEPTH_BUFFER_BIT) # should not matter, but see whether it does #####
glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE) # don't draw color pixels -
# fixes bug where this glDrawPixels replaced all colors with blue
# (reference doc for glDrawPixels explains why - it makes fragments
# using current color and depths from image, draws them normally)
print "depth_image[0][0] being written now:", depth_image[0][0] #####
## depth_image[0][0] being written now: 0.0632854178548
## glDrawPixels(w, h, GL_DEPTH_COMPONENT, _GL_TYPE_FOR_DEPTH, depth_image)
# see if this works any better -- not sure which type to try:
# types listed at http://pyopengl.sourceforge.net/documentation/ref/gl/drawpixels.html
## print glDrawPixels.__class__ ####
glDrawPixelsf(GL_DEPTH_COMPONENT, depth_image) ## if it was PIL, could say .tostring("raw","R",0,-1))######
glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE)
if 1:####
from OpenGL.GL import glFlush
glFlush()######
self._set_raster_pos(0, 0) # precaution (untested)
if 1: # confirm if possible
print "readback of depth at 0,0:", glReadPixels( 0, 0, 1, 1, GL_DEPTH_COMPONENT, _GL_TYPE_FOR_DEPTH )[0][0] ######
## BUG: readback of depth at 0,0: 1.0
## import Numeric
## print "min depth:" , Numeric.minimum( glReadPixels( 0, 0, w, h, GL_DEPTH_COMPONENT, _GL_TYPE_FOR_DEPTH ) ) #### 6 args required
## ## ValueError: invalid number of arguments
print
glEnable(GL_LIGHTING)
glEnable(GL_DEPTH_TEST)
# (but leave GL_TEXTURE_2D disabled)
return
def do_glselect_if_wanted(self): # bruce 070919 split this out
"""
Do the glRenderMode(GL_SELECT) drawing, and/or the glname-color
drawing for shader primitives, used to guess which object
might be under the mouse, for one drawing frame,
if desired for this frame. Report results by storing candidate
mouseover objects in self.glselect_dict.
The depth buffer is initially clear, and must be clear
when we're done as well.
@note: does not do related individual object depth/stencil
buffer drawing -- caller must do that on some or all
of the objects we store into self.glselect_dict.
"""
if self.glselect_wanted: # note: this will be reset below.
###@@@ WARNING: The original code for this, here in GLPane, has been duplicated and slightly modified
# in at least three other places (search for glRenderMode to find them). This is bad; common code
# should be used. Furthermore, I suspect it's sometimes needlessly called more than once per frame;
# that should be fixed too. [bruce 060721 comment]
wX, wY, self.targetdepth = self.glselect_wanted # wX, wY is the point to do the hit-test at
# targetdepth is the depth buffer value to look for at that point, during ordinary drawing phase
# (could also be used to set up clipping planes to further restrict hit-test, but this isn't yet done)
# (Warning: targetdepth could in theory be out of date, if more events come between bareMotion
# and the one caused by its gl_update, whose paintGL is what's running now, and if those events
# move what's drawn. Maybe that could happen with mousewheel events or (someday) with keypresses
# having a graphical effect. Ideally we'd count intentional redraws, and disable this picking in that case.)
self.wX, self.wY = wX, wY
self.glselect_wanted = 0
pwSize = 1 # Pick window size. Russ 081128: Was 3.
# Bruce: Replace 3, 3 with 1, 1? 5, 5? not sure whether this will
# matter... in principle should have no effect except speed.
# Russ: For glname rendering, 1x1 is better because it doesn't
# have window boundary issues. We get the coords of a single
# pixel in the window for the mouse position.
# bruce 050615 for use by nodes which want to set up their own projection matrix.
self.current_glselect = (wX, wY, pwSize, pwSize)
self._setup_projection(glselect=self.current_glselect) # option makes it use gluPickMatrix
# Russ 081209: Added.
debugPicking = debug_pref("GLPane: debug mouseover picking?", Choice_boolean_False, prefs_key=True)
if self.enabled_shaders():
# TODO: optimization: find an appropriate place to call
# _compute_frustum_planes. [bruce 090105 comment]
# Russ 081122: There seems to be no way to access the GL name
# stack in shaders. Instead, for mouseover, draw shader
# primitives with glnames as colors in glRenderMode(GL_RENDER),
# then read back the pixel color (glname) and depth value.
# Temporarily replace the full-size viewport with a little one
# at the mouse location, matching the pick matrix location.
# Otherwise, we will draw a closeup of that area into the whole
# window, rather than a few pixels. (This wasn't needed when we
# only used GL_SELECT rendering mode here, because that doesn't
# modify the frame buffer -- it just returns hits by graphics
# primitives when they are inside the clipping boundaries.)
#
# (Don't set the viewport *before* _setup_projection(), since
# that method needs to read the current whole-window viewport
# to set up glselect. See explanation in its docstring.)
savedViewport = glGetIntegerv(GL_VIEWPORT)
glViewport(wX, wY, pwSize, pwSize) # Same as current_glselect.
# First, clear the pixel RGBA to zeros and a depth of 1.0 (far),
# so we won't confuse a color with a glname if there are
# no shader primitives drawn over this pixel.
saveDepthFunc = glGetInteger(GL_DEPTH_FUNC)
glDepthFunc(GL_ALWAYS)
glWindowPos3i(wX, wY, 1) # Note the Z coord.
gl_format, gl_type = GL_RGBA, GL_UNSIGNED_BYTE
glDrawPixels(pwSize, pwSize, gl_format, gl_type, (0, 0, 0, 0))
glDepthFunc(saveDepthFunc) # needed, though we'll change it again
# We must be in glRenderMode(GL_RENDER) (as usual) when this is called.
# Note: _setup_projection leaves the matrix mode as GL_PROJECTION.
glMatrixMode(GL_MODELVIEW)
shaders = self.enabled_shaders()
try:
# Set flags so that we will use glnames-as-color mode
# in shaders, and draw only shader primitives.
# (Ideally we would also draw all non-shader primitives
# as some other color, unequal to all glname colors
# (or derived from a fake glname for that purpose),
# in order to obscure shader primitives where appropriate.
# This is intended to be done but is not yet implemented.
# [bruce 090105 addendum])
for shader in shaders:
shader.setPicking(True)
self.set_drawing_phase("glselect_glname_color")
for stereo_image in self.stereo_images_to_draw:
self._enable_stereo(stereo_image)
try:
self._do_graphicsMode_Draw(for_mouseover_highlighting=True)
# note: we can't disable depth writing here,
# since we need it to make sure the correct
# shader object comes out on top, or is
# obscured by a DL object. Instead, we'll
# clear the depth buffer again (at this pixel)
# below. [bruce 090105]
finally:
self._disable_stereo()
except:
print_compact_traceback(
"exception in or around _do_graphicsMode_Draw() during glname_color;"
"drawing ignored; restoring modelview matrix: "
)
# REVIEW: what does "drawing ignored" mean, in that message? [bruce 090105 question]
glMatrixMode(GL_MODELVIEW)
self._setup_modelview() ### REVIEW: correctness of this is unreviewed!
# now it's important to continue, at least enough to restore other gl state
pass
for shader in shaders:
shader.setPicking(False)
self.set_drawing_phase("?")
# Restore the viewport.
glViewport(savedViewport[0], savedViewport[1], savedViewport[2], savedViewport[3])
# Read pixel value from the back buffer and re-assemble glname.
glFinish() # Make sure the drawing has completed.
# REVIEW: is this glFinish needed? [bruce 090105 comment]
rgba = glReadPixels(wX, wY, 1, 1, gl_format, gl_type)[0][0]
pixZ = glReadPixelsf(wX, wY, 1, 1, GL_DEPTH_COMPONENT)[0][0]
# Clear our depth pixel to 1.0 (far), so we won't mess up the
# subsequent call of preDraw_glselect_dict.
# (The following is not the most direct way, but it ought to work.
# Note that we also clear the color pixel, since (being a glname)
# it has no purpose remaining in the color buffer -- either it's
# changed later, or, if not, that's a bug, but we'd rather have
# it black than a random color.) [bruce 090105 bugfix]
glDepthFunc(GL_ALWAYS)
glWindowPos3i(wX, wY, 1) # Note the Z coord.
glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE)
gl_format, gl_type = GL_RGBA, GL_UNSIGNED_BYTE
glDrawPixels(pwSize, pwSize, gl_format, gl_type, (0, 0, 0, 0))
glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE)
glDepthFunc(saveDepthFunc)
# Comes back sign-wrapped, in spite of specifying UNSIGNED_BYTE.
def us(b):
if b < 0:
return 256 + b
return b
bytes = tuple([us(b) for b in rgba])
##glname = (bytes[0] << 24 | bytes[1] << 16 | bytes[2] << 8 | bytes[3])
## Temp fix: Ignore the last byte, which always comes back 255 on Windows.
glname = bytes[0] << 16 | bytes[1] << 8 | bytes[2]
if debugPicking:
print (
"shader mouseover xy %d %d, " % (wX, wY)
+ "rgba bytes (0x%x, 0x%x, 0x%x, 0x%x), " % bytes
+ "Z %f, glname 0x%x" % (pixZ, glname)
)
pass
### XXX This ought to be better-merged with the DL selection below.
if glname:
obj = self.object_for_glselect_name(glname)
if debugPicking:
print "shader mouseover glname=%r, obj=%r." % (glname, obj)
if obj is None:
# REVIEW: does this happen for mouse over a non-shader primitive?
# [bruce 090105 question]
#### Note: this bug is common. Guess: we are still drawing
# ordinary colors for some primitives and/or for the
# background, and they are showing up here and confusing
# us. To help debug this, print the color too. But testing
# shows it's not so simple -- e.g. for rung bonds it happens
# where shader sphere and cylinder overlap, but not on either
# one alone; for strand bonds it also happens on the bonds alone
# (tested in Build DNA, in or not in Insert DNA).
# [bruce 090218]
#
# Update: Since it's so common, I need to turn it off by default.
# Q: is the situation safe?
# A: if a color looks like a real glname by accident,
# we'll get some random candidate object -- perhaps a killed one
# or from a different Part or even a closed assy --
# and try to draw it. That doesn't sound very safe. Unfortunately
# there is no perfect way to filter selobjs for safety, in the
# current still-informal Selobj_API. The best approximation is
# selobj_still_ok, and it should always say yes for the usual kinds,
# so I'll add it as a check in the 'else' clause below.
# [bruce 090311]
if debug_flags.atom_debug:
print "bug: object_for_glselect_name returns None for glname %r (color %r)" % (
glname,
bytes,
)
else:
if self.graphicsMode.selobj_still_ok(obj):
# bruce 090311 added condition, explained above
self.glselect_dict[id(obj)] = obj
else:
# This should be rare but possible. Leave it on briefly and see
# if it's ever common. If possible, gate it by atom_debug before
# the release. [bruce 090311]
print "fyi: glname-color selobj %r rejected since not selobj_still_ok" % obj
pass
pass
pass
if self._use_frustum_culling:
self._compute_frustum_planes()
# piotr 080331 - the frustum planes have to be setup after the
# projection matrix is setup. I'm not sure if there may
# be any side effects - see the comment below about
# possible optimization.
glSelectBuffer(self.SIZE_FOR_glSelectBuffer)
# Note: this allocates a new select buffer,
# and glRenderMode(GL_RENDER) returns it and forgets it,
# so it's required before *each* call of glRenderMode(GL_SELECT) +
# glRenderMode(GL_RENDER), not just once to set the size.
# Ref: http://pyopengl.sourceforge.net/documentation/opengl_diffs.html
# [bruce 080923 comment]
glInitNames()
# REVIEW: should we also set up a clipping plane just behind the
# hit point, as (I think) is done in ThumbView, to reduce the
# number of candidate objects? This might be a significant
# optimization, though I don't think it eliminates the chance
# of having multiple candidates. [bruce 080917 comment]
glRenderMode(GL_SELECT)
glMatrixMode(GL_MODELVIEW)
try:
self.set_drawing_phase("glselect") # bruce 070124
for stereo_image in self.stereo_images_to_draw:
self._enable_stereo(stereo_image)
try:
self._do_graphicsMode_Draw(for_mouseover_highlighting=True)
finally:
self._disable_stereo()
except:
print_compact_traceback(
"exception in or around _do_graphicsMode_Draw() during GL_SELECT; "
"ignored; restoring modelview matrix: "
)
glMatrixMode(GL_MODELVIEW)
self._setup_modelview() ### REVIEW: correctness of this is unreviewed!
# now it's important to continue, at least enough to restore other gl state
self._frustum_planes_available = False # piotr 080331
# just to be safe and not use the frustum planes computed for
# the pick matrix
self.set_drawing_phase("?")
self.current_glselect = False
# REVIEW: On systems with no stencil buffer, I think we'd also need
# to draw selobj here in highlighted form (in case that form is
# bigger than when it's not highlighted), or (easier & faster)
# just always pretend it passes the hit test and add it to
# glselect_dict -- and, make sure to give it "first dibs" for being
# the next selobj. I'll implement some of this now (untested when
# no stencil buffer) but not yet all. [bruce 050612]
selobj = self.selobj
if selobj is not None:
self.glselect_dict[id(selobj)] = selobj
# (review: is the following note correct?)
# note: unneeded, if the func that looks at this dict always
# tries selobj first (except for a kluge near
# "if self.glselect_dict", commented on below)
glFlush()
hit_records = list(glRenderMode(GL_RENDER))
if debugPicking:
print "DLs %d hits" % len(hit_records)
for (near, far, names) in hit_records: # see example code, renderpass.py
## print "hit record: near, far, names:", near, far, names
# e.g. hit record: near, far, names: 1439181696 1453030144 (1638426L,)
# which proves that near/far are too far apart to give actual depth,
# in spite of the 1- or 3-pixel drawing window (presumably they're vertices
# taken from unclipped primitives, not clipped ones).
del near, far
if 1:
# partial workaround for bug 1527. This can be removed once that bug (in drawer.py)
# is properly fixed. This exists in two places -- GLPane.py and modes.py. [bruce 060217]
if names and names[-1] == 0:
print "%d(g) partial workaround for bug 1527: removing 0 from end of namestack:" % env.redraw_counter, names
names = names[:-1]
if names:
# For now, we only use the last element of names,
# though (as of long before 080917) it is often longer:
# - some code pushes the same name twice (directly and
# via ColorSorter) (see 060725 debug print below);
# - chunks push a name even when they draw atoms/bonds
# which push their own names (see 080411 comment below).
#
# Someday: if we ever support "name/subname paths" we'll
# probably let first name interpret the remaining ones.
# In fact, if nodes change projection or viewport for
# their kids, and/or share their kids, they'd need to
# push their own names on the stack, so we'd know how
# to redraw the kids, or which ones are meant when they
# are shared.
if debug_flags.atom_debug and len(names) > 1: # bruce 060725
if len(names) == 2 and names[0] == names[1]:
if not env.seen_before("dual-names bug"): # this happens for Atoms (colorsorter bug??)
print "debug (once-per-session message): why are some glnames duplicated on the namestack?", names
else:
# Note: as of sometime before 080411, this became common --
# I guess that chunks (which recently acquired glselect names)
# are pushing their names even while drawing their atoms and bonds.
# I am not sure if this can cause any problems -- almost surely not
# directly, but maybe the nestedness of highlighted appearances could
# violate some assumptions made by the highlight code... anyway,
# to reduce verbosity I need to not print this when the deeper name
# is that of a chunk, and there are exactly two names. [bruce 080411]
if len(names) == 2 and isinstance(self.object_for_glselect_name(names[0]), self.assy.Chunk):
if not env.seen_before("nested names for Chunk"):
print "debug (once-per-session message): nested glnames for a Chunk: ", names
else:
print "debug fyi: len(names) == %d (names = %r)" % (len(names), names)
obj = self.object_for_glselect_name(names[-1]) # k should always return an obj
if obj is None:
print "bug: object_for_glselect_name returns None for name %r at end of namestack %r" % (
names[-1],
names,
)
else:
self.glselect_dict[id(obj)] = obj
# note: outside of this method, one of these will be
# chosen to be saved as self.selobj and rerendered
# in "highlighted" form
##if 0:
## # this debug print was useful for debugging bug 2945,
## # and when it happens it's usually a bug,
## # but not always:
## # - it's predicted to happen for ChunkDrawer._renderOverlayText
## # - and whenever we're using a whole-chunk display style
## # so we can't leave it in permanently. [bruce 081211]
## if isinstance( obj, self.assy.Chunk ):
## print "\n*** namestack topped with a chunk:", obj
pass
continue # next hit_record
# e maybe we should now sort glselect_dict by "hit priority"
# (for depth-tiebreaking), or at least put selobj first.
# (or this could be done lower down, where it's used.)
# [I think we do this now...]
return # from do_glselect_if_wanted
def _draw_saved_bg_image(self):
"""
"""
print "_draw_saved_bg_image", self._print_data()
sys.stdout.flush()
assert self._cached_bg_color_image is not None
w = _trim(self.width)
h = _trim(self.height)
glDisable(GL_DEPTH_TEST) # probably a speedup
glDisable(GL_LIGHTING)
glDisable(
GL_TEXTURE_2D
) # probably already the NE1 default (if so, doesn't matter here)
# Note: doing more disables might well speed up glDrawPixels;
# don't know whether that matters.
color_image = self._cached_bg_color_image
depth_image = self._cached_bg_depth_image
# draw the color image part (review: does this also modify the depth buffer?)
self._set_raster_pos(0, 0)
if 0 and 'kluge - draw depth as color':
glDrawPixels(w, h, GL_RED, _GL_TYPE_FOR_DEPTH, depth_image)
else:
glDrawPixels(w, h, _GL_FORMAT_FOR_COLOR, GL_UNSIGNED_BYTE,
color_image)
# draw the depth image part; ###BUG: this seems to replace all colors with blue... fixed below
self._set_raster_pos(
0, 0) # adding this makes the all-gray bug slightly less bad
glClear(GL_DEPTH_BUFFER_BIT
) # should not matter, but see whether it does #####
glColorMask(GL_FALSE, GL_FALSE, GL_FALSE,
GL_FALSE) # don't draw color pixels -
# fixes bug where this glDrawPixels replaced all colors with blue
# (reference doc for glDrawPixels explains why - it makes fragments
# using current color and depths from image, draws them normally)
print "depth_image[0][0] being written now:", depth_image[0][0] #####
## depth_image[0][0] being written now: 0.0632854178548
## glDrawPixels(w, h, GL_DEPTH_COMPONENT, _GL_TYPE_FOR_DEPTH, depth_image)
# see if this works any better -- not sure which type to try:
# types listed at http://pyopengl.sourceforge.net/documentation/ref/gl/drawpixels.html
## print glDrawPixels.__class__ ####
glDrawPixelsf(
GL_DEPTH_COMPONENT, depth_image
) ## if it was PIL, could say .tostring("raw","R",0,-1))######
glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE)
if 1: ####
from OpenGL.GL import glFlush
glFlush() ######
self._set_raster_pos(0, 0) # precaution (untested)
if 1: # confirm if possible
print "readback of depth at 0,0:", glReadPixels(
0, 0, 1, 1, GL_DEPTH_COMPONENT,
_GL_TYPE_FOR_DEPTH)[0][0] ######
## BUG: readback of depth at 0,0: 1.0
## import Numeric
## print "min depth:" , Numeric.minimum( glReadPixels( 0, 0, w, h, GL_DEPTH_COMPONENT, _GL_TYPE_FOR_DEPTH ) ) #### 6 args required
## ## ValueError: invalid number of arguments
print
glEnable(GL_LIGHTING)
glEnable(GL_DEPTH_TEST)
# (but leave GL_TEXTURE_2D disabled)
return
def do_glselect_if_wanted(self): #bruce 070919 split this out
"""
Do the glRenderMode(GL_SELECT) drawing, and/or the glname-color
drawing for shader primitives, used to guess which object
might be under the mouse, for one drawing frame,
if desired for this frame. Report results by storing candidate
mouseover objects in self.glselect_dict.
The depth buffer is initially clear, and must be clear
when we're done as well.
@note: does not do related individual object depth/stencil
buffer drawing -- caller must do that on some or all
of the objects we store into self.glselect_dict.
"""
if self.glselect_wanted: # note: this will be reset below.
###@@@ WARNING: The original code for this, here in GLPane, has been duplicated and slightly modified
# in at least three other places (search for glRenderMode to find them). This is bad; common code
# should be used. Furthermore, I suspect it's sometimes needlessly called more than once per frame;
# that should be fixed too. [bruce 060721 comment]
wX, wY, self.targetdepth = self.glselect_wanted # wX, wY is the point to do the hit-test at
# targetdepth is the depth buffer value to look for at that point, during ordinary drawing phase
# (could also be used to set up clipping planes to further restrict hit-test, but this isn't yet done)
# (Warning: targetdepth could in theory be out of date, if more events come between bareMotion
# and the one caused by its gl_update, whose paintGL is what's running now, and if those events
# move what's drawn. Maybe that could happen with mousewheel events or (someday) with keypresses
# having a graphical effect. Ideally we'd count intentional redraws, and disable this picking in that case.)
self.wX, self.wY = wX, wY
self.glselect_wanted = 0
pwSize = 1 # Pick window size. Russ 081128: Was 3.
# Bruce: Replace 3, 3 with 1, 1? 5, 5? not sure whether this will
# matter... in principle should have no effect except speed.
# Russ: For glname rendering, 1x1 is better because it doesn't
# have window boundary issues. We get the coords of a single
# pixel in the window for the mouse position.
#bruce 050615 for use by nodes which want to set up their own projection matrix.
self.current_glselect = (wX, wY, pwSize, pwSize)
self._setup_projection(glselect=self.current_glselect
) # option makes it use gluPickMatrix
# Russ 081209: Added.
debugPicking = debug_pref("GLPane: debug mouseover picking?",
Choice_boolean_False,
prefs_key=True)
if self.enabled_shaders():
# TODO: optimization: find an appropriate place to call
# _compute_frustum_planes. [bruce 090105 comment]
# Russ 081122: There seems to be no way to access the GL name
# stack in shaders. Instead, for mouseover, draw shader
# primitives with glnames as colors in glRenderMode(GL_RENDER),
# then read back the pixel color (glname) and depth value.
# Temporarily replace the full-size viewport with a little one
# at the mouse location, matching the pick matrix location.
# Otherwise, we will draw a closeup of that area into the whole
# window, rather than a few pixels. (This wasn't needed when we
# only used GL_SELECT rendering mode here, because that doesn't
# modify the frame buffer -- it just returns hits by graphics
# primitives when they are inside the clipping boundaries.)
#
# (Don't set the viewport *before* _setup_projection(), since
# that method needs to read the current whole-window viewport
# to set up glselect. See explanation in its docstring.)
savedViewport = glGetIntegerv(GL_VIEWPORT)
glViewport(wX, wY, pwSize, pwSize) # Same as current_glselect.
# First, clear the pixel RGBA to zeros and a depth of 1.0 (far),
# so we won't confuse a color with a glname if there are
# no shader primitives drawn over this pixel.
saveDepthFunc = glGetInteger(GL_DEPTH_FUNC)
glDepthFunc(GL_ALWAYS)
glWindowPos3i(wX, wY, 1) # Note the Z coord.
gl_format, gl_type = GL_RGBA, GL_UNSIGNED_BYTE
glDrawPixels(pwSize, pwSize, gl_format, gl_type, (0, 0, 0, 0))
glDepthFunc(
saveDepthFunc) # needed, though we'll change it again
# We must be in glRenderMode(GL_RENDER) (as usual) when this is called.
# Note: _setup_projection leaves the matrix mode as GL_PROJECTION.
glMatrixMode(GL_MODELVIEW)
shaders = self.enabled_shaders()
try:
# Set flags so that we will use glnames-as-color mode
# in shaders, and draw only shader primitives.
# (Ideally we would also draw all non-shader primitives
# as some other color, unequal to all glname colors
# (or derived from a fake glname for that purpose),
# in order to obscure shader primitives where appropriate.
# This is intended to be done but is not yet implemented.
# [bruce 090105 addendum])
for shader in shaders:
shader.setPicking(True)
self.set_drawing_phase("glselect_glname_color")
for stereo_image in self.stereo_images_to_draw:
self._enable_stereo(stereo_image)
try:
self._do_graphicsMode_Draw(
for_mouseover_highlighting=True)
# note: we can't disable depth writing here,
# since we need it to make sure the correct
# shader object comes out on top, or is
# obscured by a DL object. Instead, we'll
# clear the depth buffer again (at this pixel)
# below. [bruce 090105]
finally:
self._disable_stereo()
except:
print_compact_traceback(
"exception in or around _do_graphicsMode_Draw() during glname_color;"
"drawing ignored; restoring modelview matrix: ")
# REVIEW: what does "drawing ignored" mean, in that message? [bruce 090105 question]
glMatrixMode(GL_MODELVIEW)
self._setup_modelview(
) ### REVIEW: correctness of this is unreviewed!
# now it's important to continue, at least enough to restore other gl state
pass
for shader in shaders:
shader.setPicking(False)
self.set_drawing_phase('?')
# Restore the viewport.
glViewport(savedViewport[0], savedViewport[1],
savedViewport[2], savedViewport[3])
# Read pixel value from the back buffer and re-assemble glname.
glFinish() # Make sure the drawing has completed.
# REVIEW: is this glFinish needed? [bruce 090105 comment]
rgba = glReadPixels(wX, wY, 1, 1, gl_format, gl_type)[0][0]
pixZ = glReadPixelsf(wX, wY, 1, 1, GL_DEPTH_COMPONENT)[0][0]
# Clear our depth pixel to 1.0 (far), so we won't mess up the
# subsequent call of preDraw_glselect_dict.
# (The following is not the most direct way, but it ought to work.
# Note that we also clear the color pixel, since (being a glname)
# it has no purpose remaining in the color buffer -- either it's
# changed later, or, if not, that's a bug, but we'd rather have
# it black than a random color.) [bruce 090105 bugfix]
glDepthFunc(GL_ALWAYS)
glWindowPos3i(wX, wY, 1) # Note the Z coord.
glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE)
gl_format, gl_type = GL_RGBA, GL_UNSIGNED_BYTE
glDrawPixels(pwSize, pwSize, gl_format, gl_type, (0, 0, 0, 0))
glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE)
glDepthFunc(saveDepthFunc)
# Comes back sign-wrapped, in spite of specifying UNSIGNED_BYTE.
def us(b):
if b < 0:
return 256 + b
return b
bytes = tuple([us(b) for b in rgba])
##glname = (bytes[0] << 24 | bytes[1] << 16 | bytes[2] << 8 | bytes[3])
## Temp fix: Ignore the last byte, which always comes back 255 on Windows.
glname = (bytes[0] << 16 | bytes[1] << 8 | bytes[2])
if debugPicking:
print("shader mouseover xy %d %d, " % (wX, wY) +
"rgba bytes (0x%x, 0x%x, 0x%x, 0x%x), " % bytes +
"Z %f, glname 0x%x" % (pixZ, glname))
pass
### XXX This ought to be better-merged with the DL selection below.
if glname:
obj = self.object_for_glselect_name(glname)
if debugPicking:
print "shader mouseover glname=%r, obj=%r." % (glname,
obj)
if obj is None:
# REVIEW: does this happen for mouse over a non-shader primitive?
# [bruce 090105 question]
#### Note: this bug is common. Guess: we are still drawing
# ordinary colors for some primitives and/or for the
# background, and they are showing up here and confusing
# us. To help debug this, print the color too. But testing
# shows it's not so simple -- e.g. for rung bonds it happens
# where shader sphere and cylinder overlap, but not on either
# one alone; for strand bonds it also happens on the bonds alone
# (tested in Build DNA, in or not in Insert DNA).
# [bruce 090218]
#
# Update: Since it's so common, I need to turn it off by default.
# Q: is the situation safe?
# A: if a color looks like a real glname by accident,
# we'll get some random candidate object -- perhaps a killed one
# or from a different Part or even a closed assy --
# and try to draw it. That doesn't sound very safe. Unfortunately
# there is no perfect way to filter selobjs for safety, in the
# current still-informal Selobj_API. The best approximation is
# selobj_still_ok, and it should always say yes for the usual kinds,
# so I'll add it as a check in the 'else' clause below.
# [bruce 090311]
if debug_flags.atom_debug:
print "bug: object_for_glselect_name returns None for glname %r (color %r)" % (
glname, bytes)
else:
if self.graphicsMode.selobj_still_ok(obj):
#bruce 090311 added condition, explained above
self.glselect_dict[id(obj)] = obj
else:
# This should be rare but possible. Leave it on briefly and see
# if it's ever common. If possible, gate it by atom_debug before
# the release. [bruce 090311]
print "fyi: glname-color selobj %r rejected since not selobj_still_ok" % obj
pass
pass
pass
if self._use_frustum_culling:
self._compute_frustum_planes()
# piotr 080331 - the frustum planes have to be setup after the
# projection matrix is setup. I'm not sure if there may
# be any side effects - see the comment below about
# possible optimization.
glSelectBuffer(self.SIZE_FOR_glSelectBuffer)
# Note: this allocates a new select buffer,
# and glRenderMode(GL_RENDER) returns it and forgets it,
# so it's required before *each* call of glRenderMode(GL_SELECT) +
# glRenderMode(GL_RENDER), not just once to set the size.
# Ref: http://pyopengl.sourceforge.net/documentation/opengl_diffs.html
# [bruce 080923 comment]
glInitNames()
# REVIEW: should we also set up a clipping plane just behind the
# hit point, as (I think) is done in ThumbView, to reduce the
# number of candidate objects? This might be a significant
# optimization, though I don't think it eliminates the chance
# of having multiple candidates. [bruce 080917 comment]
glRenderMode(GL_SELECT)
glMatrixMode(GL_MODELVIEW)
try:
self.set_drawing_phase('glselect') #bruce 070124
for stereo_image in self.stereo_images_to_draw:
self._enable_stereo(stereo_image)
try:
self._do_graphicsMode_Draw(
for_mouseover_highlighting=True)
finally:
self._disable_stereo()
except:
print_compact_traceback(
"exception in or around _do_graphicsMode_Draw() during GL_SELECT; "
"ignored; restoring modelview matrix: ")
glMatrixMode(GL_MODELVIEW)
self._setup_modelview(
) ### REVIEW: correctness of this is unreviewed!
# now it's important to continue, at least enough to restore other gl state
self._frustum_planes_available = False # piotr 080331
# just to be safe and not use the frustum planes computed for
# the pick matrix
self.set_drawing_phase('?')
self.current_glselect = False
# REVIEW: On systems with no stencil buffer, I think we'd also need
# to draw selobj here in highlighted form (in case that form is
# bigger than when it's not highlighted), or (easier & faster)
# just always pretend it passes the hit test and add it to
# glselect_dict -- and, make sure to give it "first dibs" for being
# the next selobj. I'll implement some of this now (untested when
# no stencil buffer) but not yet all. [bruce 050612]
selobj = self.selobj
if selobj is not None:
self.glselect_dict[id(selobj)] = selobj
# (review: is the following note correct?)
# note: unneeded, if the func that looks at this dict always
# tries selobj first (except for a kluge near
# "if self.glselect_dict", commented on below)
glFlush()
hit_records = list(glRenderMode(GL_RENDER))
if debugPicking:
print "DLs %d hits" % len(hit_records)
for (near, far,
names) in hit_records: # see example code, renderpass.py
## print "hit record: near, far, names:", near, far, names
# e.g. hit record: near, far, names: 1439181696 1453030144 (1638426L,)
# which proves that near/far are too far apart to give actual depth,
# in spite of the 1- or 3-pixel drawing window (presumably they're vertices
# taken from unclipped primitives, not clipped ones).
del near, far
if 1:
# partial workaround for bug 1527. This can be removed once that bug (in drawer.py)
# is properly fixed. This exists in two places -- GLPane.py and modes.py. [bruce 060217]
if names and names[-1] == 0:
print "%d(g) partial workaround for bug 1527: removing 0 from end of namestack:" % env.redraw_counter, names
names = names[:-1]
if names:
# For now, we only use the last element of names,
# though (as of long before 080917) it is often longer:
# - some code pushes the same name twice (directly and
# via ColorSorter) (see 060725 debug print below);
# - chunks push a name even when they draw atoms/bonds
# which push their own names (see 080411 comment below).
#
# Someday: if we ever support "name/subname paths" we'll
# probably let first name interpret the remaining ones.
# In fact, if nodes change projection or viewport for
# their kids, and/or share their kids, they'd need to
# push their own names on the stack, so we'd know how
# to redraw the kids, or which ones are meant when they
# are shared.
if debug_flags.atom_debug and len(
names) > 1: # bruce 060725
if len(names) == 2 and names[0] == names[1]:
if not env.seen_before(
"dual-names bug"
): # this happens for Atoms (colorsorter bug??)
print "debug (once-per-session message): why are some glnames duplicated on the namestack?", names
else:
# Note: as of sometime before 080411, this became common --
# I guess that chunks (which recently acquired glselect names)
# are pushing their names even while drawing their atoms and bonds.
# I am not sure if this can cause any problems -- almost surely not
# directly, but maybe the nestedness of highlighted appearances could
# violate some assumptions made by the highlight code... anyway,
# to reduce verbosity I need to not print this when the deeper name
# is that of a chunk, and there are exactly two names. [bruce 080411]
if len(names) == 2 and \
isinstance( self.object_for_glselect_name(names[0]), self.assy.Chunk ):
if not env.seen_before(
"nested names for Chunk"):
print "debug (once-per-session message): nested glnames for a Chunk: ", names
else:
print "debug fyi: len(names) == %d (names = %r)" % (
len(names), names)
obj = self.object_for_glselect_name(
names[-1]) #k should always return an obj
if obj is None:
print "bug: object_for_glselect_name returns None for name %r at end of namestack %r" % (
names[-1], names)
else:
self.glselect_dict[id(obj)] = obj
# note: outside of this method, one of these will be
# chosen to be saved as self.selobj and rerendered
# in "highlighted" form
##if 0:
## # this debug print was useful for debugging bug 2945,
## # and when it happens it's usually a bug,
## # but not always:
## # - it's predicted to happen for ChunkDrawer._renderOverlayText
## # - and whenever we're using a whole-chunk display style
## # so we can't leave it in permanently. [bruce 081211]
## if isinstance( obj, self.assy.Chunk ):
## print "\n*** namestack topped with a chunk:", obj
pass
continue # next hit_record
#e maybe we should now sort glselect_dict by "hit priority"
# (for depth-tiebreaking), or at least put selobj first.
# (or this could be done lower down, where it's used.)
# [I think we do this now...]
return # from do_glselect_if_wanted