def test():
sim = Simulation()
# Geometry and Model Equations
sim.geomy = 'periodic'
sim.stepper = Step.AB3
sim.method = 'Spectral'
sim.dynamics = 'Linear'
sim.flux_method = Flux.spectral_sw
# Specify paramters
sim.Ly = 4000e3
sim.Ny = 256
sim.f0 = 0.
sim.Hs = [100.]
sim.rho = [1025.]
sim.end_time = sim.Ly/(np.sqrt(sim.Hs[0]*sim.g))
# Plotting parameters
sim.animate = 'None'
sim.output = False
sim.diagnose = False
# Initialize the grid and zero solutions
sim.initialize()
for ii in range(sim.Nz):
sim.soln.h[:,:,ii] = sim.Hs[ii]
# Gaussian initial conditions
x0 = 1.*sim.Lx/2.
W = 200.e3
amp = 1.
sim.soln.h[:,:,0] += amp*np.exp(-(sim.Y)**2/(W**2))
IC = sim.soln.h[:,:,0].copy()
sim.run()
# Compare final state to initial conditions
# error_h is normalized using the triangle inequality
error_h = np.linalg.norm(IC - sim.soln.h[:,:,0])/(np.linalg.norm(IC) + np.linalg.norm(sim.soln.h[:,:,0]))
error_v = np.linalg.norm(sim.soln.v[:,:,0])
assert (error_h < 1e-6) and (error_v < 5e-5)
def test():
sim = Simulation() # Create a simulation object
# Geometry and Model Equations
sim.geomx = 'walls'
sim.geomy = 'walls'
sim.stepper = Step.AB3
sim.method = 'Spectral'
sim.dynamics = 'Nonlinear'
sim.flux_method = Flux.spectral_sw
# Specify paramters
sim.Lx = 4000e3
sim.Ly = 4000e3
sim.Nx = 128
sim.Ny = 128
sim.Nz = 1
sim.g = 9.81
sim.f0 = 1.e-4
sim.beta = 0e-11
sim.cfl = 0.1
sim.Hs = [100.]
sim.rho = [1025.]
sim.end_time = 5. * minute
sim.animate = 'None'
sim.output = False
sim.diagnose = False
# Initialize the grid and zero solutions
sim.initialize()
for ii in range(sim.Nz): # Set mean depths
sim.soln.h[:, :, ii] = sim.Hs[ii]
# Gaussian initial conditions
W = 200.e3 # Width
amp = 1. # Amplitude
sim.soln.h[:, :, 0] += amp * np.exp(-(sim.X / W)**2 - (sim.Y / W)**2)
# Run the simulation
sim.run()
def test():
sim = Simulation() # Create a simulation object
# Geometry and Model Equations
sim.geomx = 'periodic'
sim.geomy = 'periodic'
sim.stepper = Step.AB3
sim.method = 'Spectral'
sim.dynamics = 'Nonlinear'
sim.flux_method = Flux.spectral_sw
# Specify paramters
sim.Lx = 4000e3
sim.Ly = 4000e3
sim.Nx = 128
sim.Ny = 128
sim.Nz = 1
sim.g = 9.81
sim.f0 = 1.e-4
sim.beta = 0e-11
sim.cfl = 0.1
sim.Hs = [100.]
sim.rho = [1025.]
sim.end_time = 5.*minute
sim.animate = 'None'
sim.output = False
sim.diagnose = False
# Initialize the grid and zero solutions
sim.initialize()
for ii in range(sim.Nz): # Set mean depths
sim.soln.h[:,:,ii] = sim.Hs[ii]
# Gaussian initial conditions
W = 200.e3 # Width
amp = 1. # Amplitude
sim.soln.h[:,:,0] += amp*np.exp(-(sim.X/W)**2 - (sim.Y/W)**2)
# Run the simulation
sim.run()
def test():
sim = Simulation()
# Geometry and Model Equations
sim.geomy = 'periodic'
sim.stepper = Step.AB2
sim.method = 'Spectral'
sim.dynamics = 'Nonlinear'
sim.flux_method = Flux.spectral_sw
# Specify paramters
sim.Ly = 4000e3
sim.Ny = 128
sim.cfl = 0.5
sim.Hs = [100.]
sim.rho = [1025.]
sim.end_time = 5. * minute
# Plotting parameters
sim.animate = 'None'
sim.output = False
sim.diagnose = False
# Initialize the grid and zero solutions
sim.initialize()
for ii in range(sim.Nz):
sim.soln.h[:, :, ii] = sim.Hs[ii]
# Gaussian initial conditions
x0 = 1. * sim.Lx / 2.
W = 200.e3
amp = 1.
sim.soln.h[:, :, 0] += amp * np.exp(-(sim.Y)**2 / (W**2))
sim.run()
def test():
sim = Simulation()
# Geometry and Model Equations
sim.geomy = 'periodic'
sim.stepper = Step.Euler
sim.method = 'Spectral'
sim.dynamics = 'Nonlinear'
sim.flux_method = Flux.spectral_sw
# Specify paramters
sim.Ly = 4000e3
sim.Ny = 128
sim.cfl = 0.5
sim.Hs = [100.]
sim.rho = [1025.]
sim.end_time = 5.*minute
# Plotting parameters
sim.animate = 'None'
sim.output = False
sim.diagnose = False
# Initialize the grid and zero solutions
sim.initialize()
for ii in range(sim.Nz):
sim.soln.h[:,:,ii] = sim.Hs[ii]
# Gaussian initial conditions
x0 = 1.*sim.Lx/2.
W = 200.e3
amp = 1.
sim.soln.h[:,:,0] += amp*np.exp(-(sim.Y)**2/(W**2))
sim.run()
sim.Ny = 128 # Grid points in y
sim.Nz = 1 # Number of layers
sim.g = 9.81 # Gravity (m/sec^2)
sim.f0 = 1.e-4 # Coriolis (1/sec)
sim.beta = 0e-11 # Coriolis beta parameter (1/m/sec)
sim.cfl = 0.1 # CFL coefficient (m)
sim.Hs = [100.] # Vector of mean layer depths (m)
sim.rho = [1025.] # Vector of layer densities (kg/m^3)
sim.end_time = 2.*24.*hour # End Time (sec)
# Parallel? Only applies to the FFTWs
sim.num_threads = 4
# Plotting parameters
sim.plott = 15.*minute # Period of plots
sim.animate = 'Anim' # 'Save' to create video frames,
# 'Anim' to animate,
# 'None' otherwise
sim.plot_vars = ['h']
#sim.plot_vars = ['vort','div']
#sim.clims = [[-0.015, 0.015],[-0.001, 0.001]]
# Output parameters
sim.output = False # True or False
sim.savet = 1.*hour # Time between saves
# Diagnostics parameters
sim.diagt = 2.*minute # Time for output
sim.diagnose = False # True or False
# Initialize the grid and zero solutions
sim.Nx = 128 # Grid points in x sim.Ny = 128 # Grid points in y sim.Nz = 1 # Number of layers sim.g = 9.81 # Gravity (m/sec^2) sim.f0 = 1.e-4 # Coriolis (1/sec) sim.beta = 0e-10 # Coriolis beta (1/m/sec) sim.Hs = [500.] # Vector of mean layer depths (m) sim.rho = [1025.] # Vector of layer densities (kg/m^3) sim.end_time = 20 * 24. * hour # End Time (sec) # Parallel? Only applies to the FFTWs sim.num_threads = 32 # Plotting parameters sim.plott = 12. * hour # Period of plots sim.animate = 'Save' # 'Save' to create video frames, # 'Anim' to animate, # 'None' otherwise sim.plot_vars = ['vort', 'v', 'u', 'h'] sim.clims = [[-0.8, 0.8], [-0.5, 0.5], [], []] # Output parameters sim.output = True # True or False sim.savet = 10. * day # Time between saves # Diagnostics parameters sim.diagt = 2. * minute # Time for output sim.diagnose = False # True or False # Initialize the grid and zero solutions sim.initialize()
sim.Ny = 512 # Grid points in y sim.Nz = 1 # Number of layers sim.g = 9.81 # Gravity (m/sec^2) sim.f0 = 1.0e-4 # Coriolis (1/sec) sim.beta = 0e-10 # Coriolis beta parameter (1/m/sec) sim.cfl = 0.15 # CFL coefficient (m) sim.Hs = [100.0] # Vector of mean layer depths (m) sim.rho = [1025.0] # Vector of layer densities (kg/m^3) sim.end_time = 6.0 * 24.0 * hour # End Time (sec) # Parallel? Only applies to the FFTWs sim.num_threads = 4 # Plotting parameters sim.plott = 20.0 * minute # Period of plots sim.animate = "Anim" # 'Save' to create video frames, # 'Anim' to animate, # 'None' otherwise sim.plot_vars = ["vort", "div", "h"] # Specify which variables to plot # sim.plot_vars = ['u','v','h'] # Specify which variables to plot # Specify manual ylimits if desired # An empty list uses default limits sim.ylims = [[-0.01, 0.01], [-2.0, 2.0], [-1.0, 1.0]] # sim.ylims=[[-0.3,0.3],[-0.2,0.2],[-1.0,1.0]] # Output parameters sim.output = False # True or False sim.savet = 1.0 * hour # Time between saves # Diagnostics parameters
# Specify paramters sim.Lx = 200e3 # Domain extent (m) sim.Ly = 200e3 # Domain extent (m) # sim.Nx = 128 # Grid points in x sim.Ny = 128 # Grid points in y sim.Nz = 1 # Number of layers sim.g = 9.81 # Gravity (m/sec^2) sim.f0 = 1.0e-4 # Coriolis (1/sec) sim.beta = 0e-10 # Coriolis beta (1/m/sec) sim.cfl = 0.2 # CFL coefficient (m) sim.Hs = [100.0] # Vector of mean layer depths (m) sim.rho = [1025.0] # Vector of layer densities (kg/m^3) sim.end_time = 14 * 24.0 * hour # End Time (sec) # Initialize the grid and zero solutions sim.animate = "None" sim.diagnose = False sim.output = False sim.initialize() # Define Differentiation Matrix and grid Dy, y = cheb(sim.Ny) y = (y[:, 0] + 1) * sim.Ly / 2 Dy = Dy * (2 / sim.Ly) # Define Basic State: Bickley Jet Ljet = 20e3 # Jet width Umax = 0.5 # Maximum speed amp = Umax * sim.f0 * Ljet / sim.g # Elevation of free-surface in basic state sim.UB = sim.g * amp / (sim.f0 * Ljet) / (np.cosh((y - sim.Ly / 2.0) / Ljet) ** 2)
# Specify paramters sim.Lx = 200e3 # Domain extent (m) sim.Ly = 200e3 # Domain extent (m) #sim.Nx = 128 # Grid points in x sim.Ny = 128 # Grid points in y sim.Nz = 1 # Number of layers sim.g = 9.81 # Gravity (m/sec^2) sim.f0 = 1.e-4 # Coriolis (1/sec) sim.beta = 0e-10 # Coriolis beta (1/m/sec) sim.cfl = 0.2 # CFL coefficient (m) sim.Hs = [100.] # Vector of mean layer depths (m) sim.rho = [1025.] # Vector of layer densities (kg/m^3) sim.end_time = 14 * 24. * hour # End Time (sec) # Initialize the grid and zero solutions sim.animate = 'None' sim.diagnose = False sim.output = False sim.initialize() # Define Differentiation Matrix and grid Dy, y = cheb(sim.Ny) y = (y[:, 0] + 1) * sim.Ly / 2 Dy = Dy * (2 / sim.Ly) # Define Basic State: Bickley Jet Ljet = 20e3 # Jet width Umax = 0.5 # Maximum speed amp = Umax * sim.f0 * Ljet / sim.g # Elevation of free-surface in basic state sim.UB = sim.g * amp / (sim.f0 * Ljet) / (np.cosh((y - sim.Ly / 2.) / Ljet)**2) sim.HB = sim.Hs[0] - amp * np.tanh((y - sim.Ly / 2.) / Ljet)