def Simulate(this, sim):
from PySimLib.Mat.OutputStream import OutputStream
mdl = sim.GetModel()
this.__EnsureMatlabConnectionIsSetup()
# make sure result folder exists
if (not this._DirExists(mdl.resultDir)):
os.makedirs(mdl.resultDir)
# preparations
cmd = "clear" # clean up workspace
cmd += "cd " + mdl.simDir + ";" # go to sim dir
Simulink.__matlabConnection.run_code(cmd)
# send variables
cmd = ""
for name in mdl.variables:
cmd += name + "=" + str(mdl.variables[name].start) + ";"
Simulink.__matlabConnection.run_code(cmd)
# simulate
cmd = "sim('" + mdl.GetFile() + "'"
if (not (mdl.startTime is None)):
cmd += ", 'StartTime', " + str(mdl.startTime)
if (not (mdl.stopTime is None)):
cmd += ", 'StopTime', " + str(mdl.stopTime)
cmd += ");"
cmd += "logsout.unpack('all');" # make all variables to top levels
cmd += "clear logsout;" # discard simulation results, as we have direct access to vars now
Simulink.__matlabConnection.run_code(cmd)
# get all timeserieses
outMat = Mat()
varList = Simulink.__matlabConnection.get_variable('who')
time = None
for x in varList:
data = Simulink.__matlabConnection.get_variable(x[0][0] + ".Data")
if (not (data is None)):
matrix = outMat.AddMatrix(x[0][0], 1, len(data))
for y in range(0, len(data)):
matrix.SetValue(0, y, data[y][0].item())
tmp = Simulink.__matlabConnection.get_variable(x[0][0] +
".Time")
if ((time is None) or (len(tmp) > len(time))):
time = tmp
# add time
matrix = outMat.AddMatrix('time', 1, len(time))
for y in range(0, len(time)):
matrix.SetValue(0, y, time[y][0].item())
# write mat file
file = open(this.__GetSimResultFilePath(sim), "wb")
stream = OutputStream(file)
outMat.Write(stream)
file.close()
def ReadInit(this, mdl):
this.__CheckIfModelIsCompiled(mdl)
initMat = Mat()
initMat.Load(this.__GetInitFilePath(mdl))
# read parameters
varTypeFilter = {
1, # parameters
}
parameters = this.__ReadVarsFromMat(initMat.GetMatrix("initialName"), initMat.GetMatrix("initialValue"), varTypeFilter)
for name in parameters:
mdl.parameters[name] = parameters[name].start
# read variables
varTypeFilter = {
2, # state variable
6, # auxiliary variable
}
mdl.variables = this.__ReadVarsFromMat(initMat.GetMatrix("initialName"), initMat.GetMatrix("initialValue"), varTypeFilter)
# read experiment values
experiment = initMat.GetMatrix("experiment")
mdl.startTime = experiment.GetValue(0, 0)
mdl.stopTime = experiment.GetValue(0, 1)
mdl.solver = this.__ReverseMapSolver(experiment.GetValue(0, 6))
# sim.solver.stepSize = TODO: ???
mdl.solver.tolerance = experiment.GetValue(0, 4)
def ReadResult(this, sim):
from PySimLib.SimulationResult import SimulationResult
mdl = sim.GetModel()
result = {}
m_res = Mat()
m_res.Load(this.__GetSimResultFilePath(sim))
for key in m_res.GetMatrices():
m = m_res.GetMatrix(key)
data = []
for y in range(0, m.GetNumberOfRows()):
data.append(m.GetValue(0, y))
result[key] = data
this._SetDerivedValuesFromSimulationResults(sim, result)
return SimulationResult(result)
def ReadResult(this, sim):
from PySimLib.Mat.Mat import Mat
from PySimLib.SimulationResult import SimulationResult
mdl = sim.GetModel()
result = {}
m_res = Mat()
m_res.Load(this._GetSimResultFilePath(sim))
# dsres matrices are all transposed-.-
names = m_res.GetMatrix("name")
names.Transpose()
dataInfo = m_res.GetMatrix("dataInfo")
dataInfo.Transpose()
for i in range(0, names.GetNumberOfStrings()):
if(i == 0 and dataInfo.GetValue(0, i) == 0):
dataMatrixIndex = 2 # hm... this is not necessarily the case... we need the biggest abscissa
else:
dataMatrixIndex = dataInfo.GetValue(0, i)
dataMatrix = m_res.GetMatrix("data_" + str(dataMatrixIndex))
k = dataInfo.GetValue(1, i)
col = abs(k) - 1
if(k > 0):
sign = 1
else:
sign = -1
currentVar = []
for j in range(0, dataMatrix.GetNumberOfColumns()):
currentVar.append(sign * dataMatrix.GetValue(j, col))
if(names.GetString(i) == "Time"):
result["time"] = currentVar
else:
result[names.GetString(i)] = currentVar
this._SetDerivedValuesFromSimulationResults(sim, result)
return SimulationResult(result)
import sys
from PySimLib.Mat.Mat import Mat
from PySimLib.Mat.TextMatrix import TextMatrix
space = "\t\t"
mat = Mat()
mat.Load(sys.argv[1])
matrices = mat.GetMatrices()
print(
"Size is either 'Rows x Columns' or, for a Textmatrix, the number of strings"
)
print("Type", space, "Size", space, "Name")
print("----")
for key in matrices:
if (type(matrices[key]) == TextMatrix):
t = "TextMatrix\t"
size = matrices[key].GetNumberOfStrings()
else:
t = "Matrix\t\t"
size = str(matrices[key].GetNumberOfRows()) + "x" + str(
matrices[key].GetNumberOfColumns())
print(t, size, space, key)
def __save_observer(this):
from PySimLib.Mat.Mat import Mat
from PySimLib.Mat.OutputStream import OutputStream
nan = float("NaN")
variables = ["time", "modeID"] + this.observe
lastVariable = variables[len(variables) - 1]
# get for every simulation the maximum number of datapoints
nDataPointsPerSim = []
for p in this.__observer[
"modeID"]: # init all sims with datapoints-length of 1
nDataPointsPerSim.append(1)
for key in variables:
if (key == "modeID"):
continue # unimportant
for i in range(0, len(nDataPointsPerSim)):
if (len(this.__observer[key][i]) > nDataPointsPerSim[i]):
nDataPointsPerSim[i] = len(this.__observer[key][i])
nDataPointsSum = 0
for n in nDataPointsPerSim:
nDataPointsSum += n
# write mat
mat = Mat()
# names matrix
names = mat.AddTextMatrix("names", len(this.__observer))
i = 0
for key in variables:
names.SetString(i, key)
i += 1
# values matrix
values = mat.AddMatrix("values", len(this.__observer), nDataPointsSum)
x = 0
for key in variables:
i = 0
y = 0
if (key == "modeID"): # modeID is special...
for p in this.__observer[key]:
for j in range(0, nDataPointsPerSim[i]):
values.SetValue(x, y, p)
y += 1
i += 1
else:
for points in this.__observer[key]:
for p in points:
values.SetValue(x, y, p)
y += 1
for j in range(len(points), nDataPointsPerSim[i]):
values.SetValue(x, y, nan)
y += 1
i += 1
x += 1
file = open("result" + os.sep + "observer_data.mat", "wb")
stream = OutputStream(file)
mat.Write(stream)
file.close()
# write csv
file = open("result" + os.sep + "observer_data.csv", "w")
# var names
for key in variables:
file.write(key)
if (key != lastVariable):
file.write(";")
file.write("\n")
# var values
y = 0
while (y < nDataPointsSum):
x = 0
for key in variables:
p = values.GetValue(x, y)
x += 1
file.write(str(p))
if (key != lastVariable):
file.write(";")
file.write("\n")
y += 1
file.close()
def __WriteInit(this, sim):
from PySimLib.Mat.OutputStream import OutputStream
from PySimLib.Mat.MatrixTypeEvaluator import TYPE_INT32
mdl = sim.GetModel()
mat = Mat()
mat.Load(this.__GetInitFilePath(mdl))
# set experiment values
experiment = mat.GetMatrix("experiment")
experiment.SetValue(0, 0, sim.startTime)
experiment.SetValue(0, 1, sim.stopTime)
experiment.SetValue(0, 4, sim.solver.tolerance)
experiment.SetValue(0, 6, this.__MapSolver(sim.solver))
# TODO: STEPSIZE
# set variable start values
names = mat.GetMatrix("initialName")
values = mat.GetMatrix("initialValue")
for i in range(0, names.GetNumberOfStrings()):
name = names.GetString(i)
if(name not in sim.variables):
continue
if(sim.variables[name].start is not None):
value = sim.variables[name].start
values.SetValue(1, i, value)
# write output
file = open(this.__GetSimInitFilePath(sim), "wb")
stream = OutputStream(file)
# mat.Write(stream);
# we need to set precision values for the matrices or dymola wont accept the input
settings = mat.GetMatrix("settings")
settings.SetDesiredOutputPrecision(TYPE_INT32)
mat.GetMatrix("initialDescription").SetString(0, "Dymola")
# we need to write the matrices in the exact order or dymola can't read the file
mat.GetMatrix("Aclass").Write("Aclass", stream)
mat.GetMatrix("experiment").Write("experiment", stream)
mat.GetMatrix("method").Write("method", stream)
settings.Write("settings", stream)
mat.GetMatrix("initialName").Write("initialName", stream)
mat.GetMatrix("initialValue").Write("initialValue", stream)
mat.GetMatrix("initialDescription").Write("initialDescription", stream)
file.close()
import sys
from PySimLib.Mat.Mat import Mat
from PySimLib.Mat.TextMatrix import TextMatrix
space = "\t\t"
mat = Mat()
mat.Load(sys.argv[1])
m = mat.GetMatrix(sys.argv[2])
if (type(m) == TextMatrix):
t = 1
print("Type: ", "TextMatrix")
print("Number of strings: ", m.GetNumberOfStrings())
else:
t = 0
print("Type: ", "Matrix")
print("Size ('Rows'x'Columns'): ",
str(m.GetNumberOfRows()) + "x" + str(m.GetNumberOfColumns()))
print("----")
if (t == 1):
for i in range(0, m.GetNumberOfStrings()):
print(m.GetString(i))
else:
for y in range(0, m.GetNumberOfRows()):
line = ""
for x in range(0, m.GetNumberOfColumns()):
line += str(m.GetValue(x, y)) + ", "
print(line)