class TadoConnector:
"""An object to store the Tado data."""
def __init__(self, hass, username, password):
"""Initialize Tado Connector."""
self.hass = hass
self._username = username
self._password = password
self.tado = None
self.zones = None
self.devices = None
self.data = {
"zone": {},
"device": {},
}
def setup(self):
"""Connect to Tado and fetch the zones."""
try:
self.tado = Tado(self._username, self._password)
except (RuntimeError, urllib.error.HTTPError) as exc:
_LOGGER.error("Unable to connect: %s", exc)
return False
self.tado.setDebugging(True)
# Load zones and devices
self.zones = self.tado.getZones()
self.devices = self.tado.getMe()["homes"]
return True
@Throttle(MIN_TIME_BETWEEN_UPDATES)
def update(self):
"""Update the registered zones."""
for zone in self.zones:
self.update_sensor("zone", zone["id"])
for device in self.devices:
self.update_sensor("device", device["id"])
def update_sensor(self, sensor_type, sensor):
"""Update the internal data from Tado."""
_LOGGER.debug("Updating %s %s", sensor_type, sensor)
try:
if sensor_type == "zone":
data = self.tado.getState(sensor)
elif sensor_type == "device":
data = self.tado.getDevices()[0]
else:
_LOGGER.debug("Unknown sensor: %s", sensor_type)
return
except RuntimeError:
_LOGGER.error(
"Unable to connect to Tado while updating %s %s", sensor_type, sensor,
)
return
self.data[sensor_type][sensor] = data
_LOGGER.debug("Dispatching update to %s %s: %s", sensor_type, sensor, data)
dispatcher_send(
self.hass, SIGNAL_TADO_UPDATE_RECEIVED.format(sensor_type, sensor)
)
def get_capabilities(self, zone_id):
"""Return the capabilities of the devices."""
return self.tado.getCapabilities(zone_id)
def reset_zone_overlay(self, zone_id):
"""Reset the zone back to the default operation."""
self.tado.resetZoneOverlay(zone_id)
self.update_sensor("zone", zone_id)
def set_zone_overlay(
self,
zone_id,
overlay_mode,
temperature=None,
duration=None,
device_type="HEATING",
mode=None,
):
"""Set a zone overlay."""
_LOGGER.debug(
"Set overlay for zone %s: mode=%s, temp=%s, duration=%s, type=%s, mode=%s",
zone_id,
overlay_mode,
temperature,
duration,
device_type,
mode,
)
try:
self.tado.setZoneOverlay(
zone_id, overlay_mode, temperature, duration, device_type, "ON", mode
)
except urllib.error.HTTPError as exc:
_LOGGER.error("Could not set zone overlay: %s", exc.read())
self.update_sensor("zone", zone_id)
def set_zone_off(self, zone_id, overlay_mode, device_type="HEATING"):
"""Set a zone to off."""
try:
self.tado.setZoneOverlay(
zone_id, overlay_mode, None, None, device_type, "OFF"
)
except urllib.error.HTTPError as exc:
_LOGGER.error("Could not set zone overlay: %s", exc.read())
self.update_sensor("zone", zone_id)
class TadoConnector:
"""An object to store the Tado data."""
def __init__(self, opp, username, password, fallback):
"""Initialize Tado Connector."""
self.opp = opp
self._username = username
self._password = password
self._fallback = fallback
self.home_id = None
self.home_name = None
self.tado = None
self.zones = None
self.devices = None
self.data = {
"device": {},
"weather": {},
"zone": {},
}
@property
def fallback(self):
"""Return fallback flag to Smart Schedule."""
return self._fallback
def setup(self):
"""Connect to Tado and fetch the zones."""
self.tado = Tado(self._username, self._password)
self.tado.setDebugging(True)
# Load zones and devices
self.zones = self.tado.getZones()
self.devices = self.tado.getDevices()
tado_home = self.tado.getMe()["homes"][0]
self.home_id = tado_home["id"]
self.home_name = tado_home["name"]
@Throttle(MIN_TIME_BETWEEN_UPDATES)
def update(self):
"""Update the registered zones."""
for device in self.devices:
self.update_sensor("device", device["shortSerialNo"])
for zone in self.zones:
self.update_sensor("zone", zone["id"])
self.data["weather"] = self.tado.getWeather()
dispatcher_send(
self.opp,
SIGNAL_TADO_UPDATE_RECEIVED.format(self.home_id, "weather", "data"),
)
def update_sensor(self, sensor_type, sensor):
"""Update the internal data from Tado."""
_LOGGER.debug("Updating %s %s", sensor_type, sensor)
try:
if sensor_type == "device":
data = self.tado.getDeviceInfo(sensor)
if (
INSIDE_TEMPERATURE_MEASUREMENT
in data["characteristics"]["capabilities"]
):
data[TEMP_OFFSET] = self.tado.getDeviceInfo(sensor, TEMP_OFFSET)
elif sensor_type == "zone":
data = self.tado.getZoneState(sensor)
else:
_LOGGER.debug("Unknown sensor: %s", sensor_type)
return
except RuntimeError:
_LOGGER.error(
"Unable to connect to Tado while updating %s %s",
sensor_type,
sensor,
)
return
self.data[sensor_type][sensor] = data
_LOGGER.debug(
"Dispatching update to %s %s %s: %s",
self.home_id,
sensor_type,
sensor,
data,
)
dispatcher_send(
self.opp,
SIGNAL_TADO_UPDATE_RECEIVED.format(self.home_id, sensor_type, sensor),
)
def get_capabilities(self, zone_id):
"""Return the capabilities of the devices."""
return self.tado.getCapabilities(zone_id)
def reset_zone_overlay(self, zone_id):
"""Reset the zone back to the default operation."""
self.tado.resetZoneOverlay(zone_id)
self.update_sensor("zone", zone_id)
def set_presence(
self,
presence=PRESET_HOME,
):
"""Set the presence to home or away."""
if presence == PRESET_AWAY:
self.tado.setAway()
elif presence == PRESET_HOME:
self.tado.setHome()
def set_zone_overlay(
self,
zone_id=None,
overlay_mode=None,
temperature=None,
duration=None,
device_type="HEATING",
mode=None,
fan_speed=None,
swing=None,
):
"""Set a zone overlay."""
_LOGGER.debug(
"Set overlay for zone %s: overlay_mode=%s, temp=%s, duration=%s, type=%s, mode=%s fan_speed=%s swing=%s",
zone_id,
overlay_mode,
temperature,
duration,
device_type,
mode,
fan_speed,
swing,
)
try:
self.tado.setZoneOverlay(
zone_id,
overlay_mode,
temperature,
duration,
device_type,
"ON",
mode,
fanSpeed=fan_speed,
swing=swing,
)
except RequestException as exc:
_LOGGER.error("Could not set zone overlay: %s", exc)
self.update_sensor("zone", zone_id)
def set_zone_off(self, zone_id, overlay_mode, device_type="HEATING"):
"""Set a zone to off."""
try:
self.tado.setZoneOverlay(
zone_id, overlay_mode, None, None, device_type, "OFF"
)
except RequestException as exc:
_LOGGER.error("Could not set zone overlay: %s", exc)
self.update_sensor("zone", zone_id)
def set_temperature_offset(self, device_id, offset):
"""Set temperature offset of device."""
try:
self.tado.setTempOffset(device_id, offset)
except RequestException as exc:
_LOGGER.error("Could not set temperature offset: %s", exc)
class TadoConnector:
"""An object to store the Tado data."""
def __init__(self, hass, username, password, fallback):
"""Initialize Tado Connector."""
self.hass = hass
self._username = username
self._password = password
self._fallback = fallback
self.device_id = None
self.tado = None
self.zones = None
self.devices = None
self.data = {
"zone": {},
"device": {},
}
@property
def fallback(self):
"""Return fallback flag to Smart Schedule."""
return self._fallback
def setup(self):
"""Connect to Tado and fetch the zones."""
self.tado = Tado(self._username, self._password)
self.tado.setDebugging(True)
# Load zones and devices
self.zones = self.tado.getZones()
self.devices = self.tado.getMe()["homes"]
self.device_id = self.devices[0]["id"]
@Throttle(MIN_TIME_BETWEEN_UPDATES)
def update(self):
"""Update the registered zones."""
for zone in self.zones:
self.update_sensor("zone", zone["id"])
for device in self.devices:
self.update_sensor("device", device["id"])
def update_sensor(self, sensor_type, sensor):
"""Update the internal data from Tado."""
_LOGGER.debug("Updating %s %s", sensor_type, sensor)
try:
if sensor_type == "zone":
data = self.tado.getZoneState(sensor)
elif sensor_type == "device":
devices_data = self.tado.getDevices()
if not devices_data:
_LOGGER.info(
"There are no devices to setup on this tado account")
return
data = devices_data[0]
else:
_LOGGER.debug("Unknown sensor: %s", sensor_type)
return
except RuntimeError:
_LOGGER.error(
"Unable to connect to Tado while updating %s %s",
sensor_type,
sensor,
)
return
self.data[sensor_type][sensor] = data
_LOGGER.debug(
"Dispatching update to %s %s %s: %s",
self.device_id,
sensor_type,
sensor,
data,
)
dispatcher_send(
self.hass,
SIGNAL_TADO_UPDATE_RECEIVED.format(self.device_id, sensor_type,
sensor),
)
def get_capabilities(self, zone_id):
"""Return the capabilities of the devices."""
return self.tado.getCapabilities(zone_id)
def reset_zone_overlay(self, zone_id):
"""Reset the zone back to the default operation."""
self.tado.resetZoneOverlay(zone_id)
self.update_sensor("zone", zone_id)
def set_presence(
self,
presence=PRESET_HOME,
):
"""Set the presence to home or away."""
if presence == PRESET_AWAY:
self.tado.setAway()
elif presence == PRESET_HOME:
self.tado.setHome()
def set_zone_overlay(
self,
zone_id=None,
overlay_mode=None,
temperature=None,
duration=None,
device_type="HEATING",
mode=None,
fan_speed=None,
swing=None,
):
"""Set a zone overlay."""
_LOGGER.debug(
"Set overlay for zone %s: overlay_mode=%s, temp=%s, duration=%s, type=%s, mode=%s fan_speed=%s swing=%s",
zone_id,
overlay_mode,
temperature,
duration,
device_type,
mode,
fan_speed,
swing,
)
try:
self.tado.setZoneOverlay(
zone_id,
overlay_mode,
temperature,
duration,
device_type,
"ON",
mode,
fanSpeed=fan_speed,
swing=swing,
)
except RequestException as exc:
_LOGGER.error("Could not set zone overlay: %s", exc)
self.update_sensor("zone", zone_id)
def set_zone_off(self, zone_id, overlay_mode, device_type="HEATING"):
"""Set a zone to off."""
try:
self.tado.setZoneOverlay(zone_id, overlay_mode, None, None,
device_type, "OFF")
except RequestException as exc:
_LOGGER.error("Could not set zone overlay: %s", exc)
self.update_sensor("zone", zone_id)
def get_me(args):
t = log_in(args.email, args.password)
me = tado_client.getMe(t)
print(me)