def tearDown(self):
if d.orientation != self.initial_orientation:
d.orientation = self.initial_orientation
d.freeze_rotation(False)
if self.is_call_active2:
dut_manager.activate_phone(self.phone2)
self.assertTrue(Dialer.end_call(),
'Failed to end call in cleanup.')
self.is_call_active2 = False
if self.is_call_active3:
dut_manager.activate_phone(self.phone3)
self.assertTrue(Dialer.end_call(),
'Failed to end call in cleanup.')
self.is_call_active3 = False
if self.is_call_waiting_disabled:
dut_manager.activate_phone(self.phone1)
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(),
'Dialer failed to launch.')
self.assertTrue(
Dialer.enable_call_waiting(),
'Failed to activate call waiting using menu (cleanup).')
self.is_call_waiting_disabled = False
for phone in [self.phone1, self.phone2, self.phone3]:
LOG.info('Cleaning up for %s.' % phone)
dut_manager.activate_phone(phone)
UiAutomatorUtils.close_all_tasks()
StatusBar.open_notifications()
StatusBar.clear_notifications()
d.press.home()
def test_back_to_back_voice_call_hold_unhold(self):
""" ST_TELEPHONY_SS_CH_005 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number),
'Failed to initiate call.')
self.is_call_active = True
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active.')
self.assertTrue(Dialer.is_call_active(), 'Call is inactive.')
LOG.info('Put call hold/unhold 100 times.')
for i in xrange(100):
LOG.info('Iteration #%s' % i)
LOG.info('Put call on hold.')
self.assertTrue(Dialer.hold_call(), 'Failed to put call on hold.')
LOG.info('Check that call is on hold.')
self.assertTrue(Dialer.is_call_on_hold(), 'Call is not on hold.')
LOG.info('Resume call.')
self.assertTrue(Dialer.resume_call(), 'Failed to resume call.')
LOG.info('Check that call is not on hold anymore.')
self.assertFalse(Dialer.is_call_on_hold(),
'Call is still on hold.')
LOG.info('End call.')
self.assertTrue(Dialer.end_call(), 'Failed to end call.')
self.is_call_active = False
def test_call_wait_third_call_management(self):
""" ST_TELEPHONY_SS_CW_009 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Activate call waiting using menu.')
self.assertTrue(Dialer.enable_call_waiting(),
'Failed to activate call waiting using menu.')
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number))
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Accept incoming call from %s.' % self.phone3_number)
self.assertTrue(
Dialer.answer_incoming_call(self.phone3_number),
'Failed to accept incoming call from %s' % self.phone3_number)
LOG.info('Check that call with %s is active.' % self.phone3_number)
self.assertTrue(Dialer.is_call_active(self.phone3_number),
'Call with %s is inactive.' % self.phone3_number)
LOG.info('Check that call with %s is on hold.' % self.phone2_number)
self.assertTrue(Dialer.is_call_on_hold(self.phone2_number),
'Call with %s is not on hold.' % self.phone2_number)
LOG.info('Activate %s' % self.phone4)
dut_manager.activate_phone(self.phone4)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone4, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active4 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
# Dismissing will redirect to voice mail
LOG.info('Dismiss incoming call from %s.' % self.phone4_number)
self.assertTrue(
Dialer.dismiss_incoming_call(self.phone4_number),
'Failed to dismiss incoming call from %s' % self.phone4_number)
LOG.info('Check that call with %s is active.' % self.phone3_number)
self.assertTrue(Dialer.is_call_active(self.phone3_number),
'Call with %s is inactive.' % self.phone3_number)
LOG.info('Check that call with %s is on hold.' % self.phone2_number)
self.assertTrue(Dialer.is_call_on_hold(self.phone2_number),
'Call with %s is not on hold.' % self.phone2_number)
LOG.info('Activate %s' % self.phone4)
dut_manager.activate_phone(self.phone4)
# If voice mail is active, call is redirected to it
# Otherwise line will be busy
LOG.info(
'Check if call is active with %s (redirected to voice mail).' %
self.phone1_number)
if Dialer.is_call_active(self.phone1_number):
LOG.info('Call was redirected to voice mail.')
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
else:
LOG.info('Line was busy.')
self.is_call_active4 = False
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info(
'A message is sent to PHONE1 (missed calls). Will close the notifications.'
)
StatusBar.open_notifications()
self.assertTrue(StatusBar.close_notifications(),
'Failed to close notification.')
LOG.info('Activate %s' % self.phone4)
dut_manager.activate_phone(self.phone4)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone4, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active4 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Accept incoming call from %s.' % self.phone4_number)
# This will end call with PHONE2 and leave PHONE4 still dialing
self.assertFalse(
Dialer.answer_incoming_call(self.phone4_number),
'Answered incoming call from %s from the first try.' %
self.phone4_number)
self.is_call_active2 = False
# This will actually answer incoming call from PHONE4
self.assertTrue(
Dialer.answer_incoming_call(self.phone4_number),
'Failed to accept incoming call from %s' % self.phone4_number)
LOG.info('Check that call with %s is active.' % self.phone4_number)
self.assertTrue(Dialer.is_call_active(self.phone4_number),
'Call with %s is inactive.' % self.phone4_number)
LOG.info('Check that call with %s is on hold.' % self.phone3_number)
self.assertTrue(Dialer.is_call_on_hold(self.phone3_number),
'Call with %s is not on hold.' % self.phone3_number)
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active3 = False
LOG.info('Activate %s' % self.phone4)
dut_manager.activate_phone(self.phone4)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active4 = False
def test_call_wait_using_code_43(self):
""" ST_TELEPHONY_SS_CW_001 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Activate call waiting using code (%s).' %
self.activate_call_waiting_nr)
self.assertTrue(
Dialer.dial_number(self.activate_call_waiting_nr),
'Failed to activate call waiting using code (%s).' %
self.activate_call_waiting_nr)
LOG.info('Check that USSD popup is open.')
self.assertTrue(Dialer.is_ussd_open(), 'USSD popup not open.')
self.is_ussd_open = True
LOG.info('Get USSD message.')
msg = Dialer.get_ussd_message()
LOG.info('Found msg: %s' % msg)
LOG.info('Close USSD popup.')
self.assertTrue(Dialer.close_ussd(), 'Failed to close ussd popup.')
self.is_ussd_open = False
service_enabled_msg = 'Call waiting\nService was enabled.'
LOG.info(
'Check that USSD msg indicate that service has been activated.')
self.assertEqual(
msg, service_enabled_msg,
'Found "%s" instead of "%s"' % (msg, service_enabled_msg))
LOG.info('Interrogate call waiting using code (%s).' %
self.interrogate_call_waiting_nr)
self.assertTrue(
Dialer.dial_number(self.interrogate_call_waiting_nr),
'Failed to interrogate call waiting using code (%s).' %
self.interrogate_call_waiting_nr)
LOG.info('Check that USSD popup is open.')
self.assertTrue(Dialer.is_ussd_open(), 'USSD popup not open.')
self.is_ussd_open = True
LOG.info('Get USSD message.')
msg = Dialer.get_ussd_message()
LOG.info('Found msg: %s' % msg)
LOG.info('Close USSD popup.')
self.assertTrue(Dialer.close_ussd(), 'Failed to close ussd popup.')
self.is_ussd_open = False
service_interrogate_msg = 'Call waiting\nService was enabled for:\nVoice\nSync'
LOG.info(
'Check that USSD msg indicate that service has been activated.')
self.assertEqual(
msg, service_interrogate_msg,
'Found "%s" instead of "%s"' % (msg, service_interrogate_msg))
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number))
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check that there is an incoming call from %s' %
self.phone3_number)
self.assertTrue(Dialer.check_incoming_call(self.phone3_number),
'No incoming call from %s.' % self.phone3_number)
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active3 = False
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active2 = False
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Deactivate call waiting using code (%s).' %
self.deactivate_call_waiting_nr)
self.assertTrue(
Dialer.dial_number(self.deactivate_call_waiting_nr),
'Failed to deactivate call waiting using code (%s).' %
self.deactivate_call_waiting_nr)
self.is_call_waiting_disabled = True
LOG.info('Check that USSD popup is open.')
self.assertTrue(Dialer.is_ussd_open(), 'USSD popup not open.')
self.is_ussd_open = True
LOG.info('Get USSD message.')
msg = Dialer.get_ussd_message()
LOG.info('Found msg: %s' % msg)
LOG.info('Close USSD popup.')
self.assertTrue(Dialer.close_ussd(), 'Failed to close ussd popup.')
self.is_ussd_open = False
service_disabled_msg = 'Call waiting\nService has been disabled.'
LOG.info(
'Check that USSD msg indicate that service has been disabled.')
self.assertEqual(
msg, service_disabled_msg,
'Found "%s" instead of "%s"' % (msg, service_disabled_msg))
LOG.info('Interrogate call waiting using code (%s).' %
self.interrogate_call_waiting_nr)
self.assertTrue(
Dialer.dial_number(self.interrogate_call_waiting_nr),
'Failed to interrogate call waiting using code (%s).' %
self.interrogate_call_waiting_nr)
LOG.info('Check that USSD popup is open.')
self.assertTrue(Dialer.is_ussd_open(), 'USSD popup not open.')
self.is_ussd_open = True
LOG.info('Get USSD message.')
msg = Dialer.get_ussd_message()
LOG.info('Found msg: %s' % msg)
LOG.info('Close USSD popup.')
self.assertTrue(Dialer.close_ussd(), 'Failed to close ussd popup.')
self.is_ussd_open = False
service_interrogate_msg = service_disabled_msg
LOG.info(
'Check that USSD msg indicate that service has been disabled.')
self.assertEqual(
msg, service_interrogate_msg,
'Found "%s" instead of "%s"' % (msg, service_interrogate_msg))
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number))
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check that there is no incoming call from %s' %
self.phone3_number)
self.assertFalse(Dialer.check_incoming_call(self.phone3_number),
'Found incoming call from %s.' % self.phone3_number)
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
# If voice mail is active, call is redirected to it
# Otherwise line will be busy
LOG.info(
'Check if call is active with %s (redirected to voice mail).' %
self.phone1_number)
if Dialer.is_call_active(self.phone1_number):
LOG.info('Call was redirected to voice mail.')
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
else:
LOG.info('Line was busy.')
self.is_call_active3 = False
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active2 = False
def test_call_wait_back_to_back_incoming_call_accepted(self):
""" ST_TELEPHONY_SS_CW_008 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Activate call waiting using menu.')
self.assertTrue(Dialer.enable_call_waiting(),
'Failed to activate call waiting using menu.')
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number))
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
for i in range(5):
LOG.info('Iteration: %s' % i)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(),
'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' %
(self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Accept incoming call from %s.' % self.phone3_number)
self.assertTrue(
Dialer.answer_incoming_call(self.phone3_number),
'Failed to accept incoming call from %s' % self.phone3_number)
LOG.info('Check that call with %s is active.' % self.phone3_number)
self.assertTrue(Dialer.is_call_active(self.phone3_number),
'Call with %s is inactive.' % self.phone3_number)
LOG.info('Check that call with %s is on hold.' %
self.phone2_number)
self.assertTrue(
Dialer.is_call_on_hold(self.phone2_number),
'Call with %s is not on hold.' % self.phone2_number)
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active3 = False
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check that call with %s is still on hold.' %
self.phone2_number)
self.assertTrue(
Dialer.is_call_on_hold(self.phone2_number),
'Call with %s is not on hold.' % self.phone2_number)
LOG.info('Resume call with %s.' % self.phone2_number)
self.assertTrue(Dialer.resume_call(), 'Failed to resume call.')
LOG.info('End call with %s.' % self.phone2_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone2_number)
self.is_call_active2 = False
def test_call_wait_incoming_call_ignored(self):
""" ST_TELEPHONY_SS_CW_004 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Activate call waiting using menu.')
self.assertTrue(Dialer.enable_call_waiting(),
'Failed to activate call waiting using menu.')
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number))
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Dismiss incoming call from %s.' % self.phone3_number)
self.assertTrue(
Dialer.dismiss_incoming_call(self.phone3_number),
'Failed to dismiss incoming call from %s' % self.phone3_number)
LOG.info('Check that there is no indication of incoming call from %s' %
self.phone3_number)
self.assertFalse(
Dialer.check_incoming_call(self.phone3_number),
'Still found indication of incoming call from %s.' %
self.phone3_number)
LOG.info('Check if call is still active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
# If voice mail is active, call is redirected to it
# Otherwise line will be busy
LOG.info(
'Check if call is active with %s (redirected to voice mail).' %
self.phone1_number)
if Dialer.is_call_active(self.phone1_number):
LOG.info('Call was redirected to voice mail.')
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
else:
LOG.info('Line was busy.')
self.is_call_active3 = False
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('End call with %s.' % self.phone1_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone1_number)
self.is_call_active2 = False
def test_resume_call_in_hold_after_releasing_active_call(self):
""" ST_TELEPHONY_SS_CH_002 """
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone1, self.phone2))
self.assertTrue(Dialer.dial_number(self.phone2_number),
'Failed to initiate call.')
LOG.info('Activate %s' % self.phone2)
dut_manager.activate_phone(self.phone2)
LOG.info('Answer incoming call.')
Dialer.answer_call() # I wish I could do an assert here
self.is_call_active2 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Check if call is active with %s.' % self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number),
'Call is inactive.')
LOG.info('Activate %s' % self.phone3)
dut_manager.activate_phone(self.phone3)
LOG.info('Launch Dialer.')
Dialer.launch()
self.assertTrue(Dialer.dialer_launched(), 'Dialer failed to launch.')
LOG.info('Initiate a call from %s to %s.' % (self.phone3, self.phone1))
self.assertTrue(Dialer.dial_number(self.phone1_number),
'Failed to initiate call.')
self.is_call_active3 = True
LOG.info('Activate %s' % self.phone1)
dut_manager.activate_phone(self.phone1)
LOG.info('Answer incoming call from %s.' % self.phone3_number)
self.assertTrue(
Dialer.answer_incoming_call(self.phone3_number),
'Failed to answer incoming call from %s' % self.phone3_number)
LOG.info('Check that call with %s is active.' % self.phone3_number)
self.assertTrue(Dialer.is_call_active(self.phone3_number),
'Call with %s is inactive.' % self.phone3_number)
LOG.info('Check that call with %s is on hold.' % self.phone2_number)
self.assertTrue(Dialer.is_call_on_hold(self.phone2_number),
'Call with %s is not on hold.' % self.phone2_number)
LOG.info('End call with %s.' % self.phone3_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone3_number)
self.is_call_active3 = False
LOG.info('Check that call with %s is unheld and turned active.' %
self.phone2_number)
self.assertTrue(Dialer.is_call_active(self.phone2_number))
LOG.info('End call with %s.' % self.phone2_number)
self.assertTrue(Dialer.end_call(),
'Failed to end call with %s.' % self.phone2_number)
self.is_call_active2 = False