#########################################################
#
# Projeto: Minicuros - Utilizando a GPIO da Raspberry Pi
# Autor: Antonio Raian Mendes <*****@*****.**>
# Atividade: 3 - Debouncing digital
#
#########################################################
import RPi_emu.GPIO as GPIO
import time
#define uma variavel com o valor do pino usado
LED = 17
BTN = 18
GPIO.setmode(GPIO.BCM)
GPIO.setup(LED, GPIO.OUT)
GPIO.setup(BTN, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
def myReturn(pin):
print("Evento %s = %s" % (pin, GPIO.input(pin)))
btnValue = GPIO.input(BTN)
GPIO.output(LED, btnValue)
print("Raspberry Pi Button\n")
GPIO.add_event_detect(BTN, GPIO.BOTH, callback=myReturn, bouncetime=400)
try:
time.sleep(500)
def myReturn(pin):
print("Evento %s = %s" % (pin, GPIO.input(pin)))
btnValue = GPIO.input(BTN)
GPIO.output(LED, btnValue)
def __init__(self):
random.seed() #Random numero
self.__address = 0x70
self.__smbus = GPIO.SMBus(0)
GPIO.add_autoreply(self.__address, 2, 5)
GPIO.add_autoreply(self.__address, 3, 1)
def write(self,value):
self.__smbus.write_byte_data(self.__address, 0, value)
GPIO.add_autoreply(self.__address, 1, random.randrange(0, 510, 1)) #Random numero pro registrador 1
return -1
#########################################################
#
# Projeto: Minicuros - Utilizando a GPIO da Raspberry Pi
# Autor: Antonio Raian Mendes <*****@*****.**>
# Atividade: 2 - Acender LED
#
#########################################################
import RPi_emu.GPIO as GPIO
import time
#define uma variavel com o valor do pino usado
LED = 17
#Seta o GPIO para o modo BCM, poderia ser o modo BOARD
GPIO.setmode(GPIO.BCM)
#Identifico o meu pino e digo q ele é de saída
GPIO.setup(LED, GPIO.OUT)
print("Raspberry Pi blink\n")
while 1:
GPIO.output(LED, GPIO.HIGH) #Aciona o pino
time.sleep(1.5) #Espera um segundo e meio
GPIO.output(LED, GPIO.LOW) #Desliga o pino
time.sleep(0.5) #espera meio segundo
def setPins(pins, bits):
for led, bit in zip(pins, bits):
# print('LED BIT', led, bit)
GPIO.output(led, bit)
def cleanUp(leds, counter):
print('Zerou')
counter.clean()
setPins(leds, binario(0))
if __name__ == '__main__':
#define uma variavel com o valor dos pinos usado
LEDS = [17, 27, 22, 10, 9, 11, 5, 6]
BTN_START = 23
BTN_CLEAR = 24
clear()
#Setando o modo de operação
GPIO.setmode(GPIO.BCM)
#inicializando todos os pinos dos leds
for i in LEDS:
GPIO.setup(i, GPIO.OUT, initial=GPIO.LOW)
#Inicializando Botões
GPIO.setup(BTN_START, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(BTN_CLEAR, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
#Cria a instancia de um contador iniciando em 0
counter = Counter(0)
#Cria os detectores de eventos para os pinos de entrada
GPIO.add_event_detect(BTN_START,
GPIO.BOTH,