def makeReinforcement(
s_cover,
helical_rebar_t_offset,
helical_rebar_b_offset,
pitch,
dia_of_helical_rebar,
main_rebars_t_offset,
main_rebars_b_offset,
dia_of_main_rebars,
number_angle_check,
number_angle_value,
structure=None,
facename=None,
):
"""makeReinforcement(SideCover, TopOffsetOfHelicalRebars,
BottomOffsetOfHelicalRebars, Pitch, DiameterOfHelicalRebar,
TopOffsetOfMainRebars, BottomOffsetOfMainRebars, DiameterOfMainRebars,
NumberAngleCheck, NumberAngleValue, Structure, Facename):
Adds the helical and straight rebars to the selected structural column
object.
"""
if not structure and not facename:
if FreeCAD.GuiUp:
selected_obj = FreeCADGui.Selection.getSelectionEx()[0]
structure = selected_obj.Object
facename = selected_obj.SubElementNames[0]
else:
FreeCAD.Console.PrintError(
"Error: Pass structure and facename arguments")
return
FacePRM = getParametersOfFace(structure, facename, sketch=False)
if not FacePRM:
FreeCAD.Console.PrintError(
"Cannot identified shape or from which base object"
"sturctural element is derived\n")
return
helical_rebar = makeHelicalRebar(
s_cover,
helical_rebar_b_offset,
dia_of_helical_rebar,
helical_rebar_t_offset,
pitch,
structure,
facename,
)
main_rebars_s_cover = s_cover + dia_of_helical_rebar
main_rebars_list = makeStraightRebars(
main_rebars_s_cover,
main_rebars_t_offset,
main_rebars_b_offset,
dia_of_main_rebars,
number_angle_check,
number_angle_value,
structure,
facename,
)
CircularColumnReinforcementRebarGroup = (
_CircularColumnReinforcementRebarGroup())
if FreeCAD.GuiUp:
_ViewProviderCircularColumnReinforcementRebarGroup(
CircularColumnReinforcementRebarGroup.Object.ViewObject)
CircularColumnReinforcementRebarGroup.addHelicalRebars(helical_rebar)
CircularColumnReinforcementRebarGroup.addMainRebars(main_rebars_list)
properties_values = []
properties_values.append(("TopOffset", main_rebars_t_offset))
properties_values.append(("BottomOffset", main_rebars_b_offset))
properties_values.append(("Diameter", dia_of_main_rebars))
properties_values.append(("NumberAngleCheck", number_angle_check))
if number_angle_check:
properties_values.append(("Number", number_angle_value))
properties_values.append(("Angle", 360.00 / number_angle_value))
else:
properties_values.append(
("Number", math.ceil(360 / number_angle_value)))
properties_values.append(("Angle", number_angle_value))
setGroupPropertiesValues(
properties_values,
CircularColumnReinforcementRebarGroup.main_rebars_group,
)
FreeCAD.ActiveDocument.recompute()
return CircularColumnReinforcementRebarGroup
def makeSingleTieFourRebars(
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
offset_of_tie,
bent_angle,
extension_factor,
dia_of_tie,
number_spacing_check,
number_spacing_value,
dia_of_rebars,
t_offset_of_rebars,
b_offset_of_rebars,
rebar_type="StraightRebar",
hook_orientation="Top Inside",
hook_extend_along="x-axis",
l_rebar_rounding=None,
hook_extension=None,
structure=None,
facename=None,
):
"""makeSingleTieFourRebars(LeftCoverOfTie, RightCoverOfTie, TopCoverOfTie,
BottomCoverOfTie, OffsetofTie, BentAngle, ExtensionFactor, DiameterOfTie,
NumberSpacingCheck, NumberSpacingValue, DiameterOfRebars, TopOffsetOfRebars,
BottomOffsetOfRebars, RebarType, LShapeHookOrientation, HookExtendAlong,
LShapeRebarRounding, LShapeHookLength, Structure, Facename):
Adds the Single Tie Four Rebars reinforcement to the selected structural
column object.
It takes two different inputs for rebar_type i.e. 'StraightRebar',
'LShapeRebar'.
It takes eight different orientations input for L-shaped hooks i.e. 'Top
Inside', 'Top Outside', 'Bottom Inside', 'Bottom Outside', 'Top Left',
'Top Right', 'Bottom Left', 'Bottom Right'.
It takes two different inputs for hook_extend_along i.e. 'x-axis', 'y-axis'.
"""
if not structure and not facename:
if FreeCAD.GuiUp:
selected_obj = FreeCADGui.Selection.getSelectionEx()[0]
structure = selected_obj.Object
facename = selected_obj.SubElementNames[0]
else:
showWarning("Error: Pass structure and facename arguments")
return None
# Calculate common parameters for Straight/LShaped rebars
t_cover = t_offset_of_rebars
b_cover = b_offset_of_rebars
rebar_number_spacing_check = True
rebar_number_spacing_value = 2
# Create Straight Rebars
if rebar_type == "StraightRebar":
hook_extend_along == "x-axis"
facename_for_rebars = getFacenameforRebar(
hook_extend_along, facename, structure
)
f_cover = b_cover_of_tie + dia_of_tie
r_cover = r_cover_of_tie + dia_of_tie
l_cover = l_cover_of_tie + dia_of_tie
orientation = "Vertical"
list_coverAlong = ["Right Side", "Left Side"]
rl_cover = [r_cover, l_cover]
main_rebars = []
for i, coverAlong in enumerate(list_coverAlong):
main_rebars.append(
makeStraightRebar(
f_cover,
(coverAlong, rl_cover[i]),
t_cover,
b_cover,
dia_of_rebars,
rebar_number_spacing_check,
rebar_number_spacing_value,
orientation,
structure,
facename_for_rebars,
)
)
main_rebars[i].OffsetEnd = (
t_cover_of_tie + dia_of_tie + dia_of_rebars / 2
)
# Create L-Shaped Rebars
elif rebar_type == "LShapeRebar":
facename_for_rebars = getFacenameforRebar(
hook_extend_along, facename, structure
)
FacePRM = getParametersOfFace(structure, facename_for_rebars)
face_length = FacePRM[0][0]
if hook_extend_along == "x-axis":
f_cover = b_cover_of_tie + dia_of_tie
else:
f_cover = r_cover_of_tie + dia_of_tie
# Implement hook extension values from here:
# https://archive.org/details/gov.in.is.sp.16.1980/page/n207
if not hook_extension:
hook_extension = 4 * dia_of_rebars
if not l_rebar_rounding:
l_rebar_rounding = (
float(dia_of_tie) / 2 + dia_of_rebars / 2
) / dia_of_tie
l_rebar_orientation_cover = getLRebarOrientationLeftRightCover(
hook_orientation,
hook_extension,
hook_extend_along,
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
dia_of_tie,
dia_of_rebars,
l_rebar_rounding,
face_length,
)
list_orientation = l_rebar_orientation_cover["list_orientation"]
l_cover = l_rebar_orientation_cover["l_cover"]
r_cover = l_rebar_orientation_cover["r_cover"]
t_cover = t_offset_of_rebars
b_cover = b_offset_of_rebars
main_rebars = []
for i, orientation in enumerate(list_orientation):
main_rebars.append(
makeLShapeRebar(
f_cover,
b_cover,
l_cover[i],
r_cover[i],
dia_of_rebars,
t_cover,
l_rebar_rounding,
rebar_number_spacing_check,
rebar_number_spacing_value,
orientation,
structure,
facename_for_rebars,
)
)
if hook_extend_along == "x-axis":
main_rebars[i].OffsetEnd = (
t_cover_of_tie + dia_of_tie + dia_of_rebars / 2
)
else:
main_rebars[i].OffsetEnd = (
l_cover_of_tie + dia_of_tie + dia_of_rebars / 2
)
# Calculate parameters for Tie
rounding = (float(dia_of_tie) / 2 + dia_of_rebars / 2) / dia_of_tie
f_cover = offset_of_tie
# Create Tie
ties = makeStirrup(
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
f_cover,
bent_angle,
extension_factor,
dia_of_tie,
rounding,
number_spacing_check,
number_spacing_value,
structure,
facename,
)
# Create SingleTieFourRebars group object
SingleTieFourRebars = _SingleTieFourRebars()
if FreeCAD.GuiUp:
_ViewProviderRebarGroup(SingleTieFourRebars.Object.ViewObject)
# Add created tie and rebars to SingleTieFourRebars group
SingleTieFourRebars.addTies(ties)
SingleTieFourRebars.addMainRebars(main_rebars)
# Set properties values for ties in Ties group object
properties_values = []
properties_values.append(("TiesConfiguration", "SingleTie"))
properties_values.append(("LeftCover", l_cover_of_tie))
properties_values.append(("RightCover", r_cover_of_tie))
properties_values.append(("TopCover", t_cover_of_tie))
properties_values.append(("BottomCover", b_cover_of_tie))
setGroupPropertiesValues(properties_values, SingleTieFourRebars.ties_group)
# Set properties values for rebars in MainRebars group object
properties_values = []
properties_values.append(("RebarType", rebar_type))
properties_values.append(("TopOffset", t_offset_of_rebars))
properties_values.append(("BottomOffset", b_offset_of_rebars))
properties_values.append(("HookOrientation", hook_orientation))
properties_values.append(("HookExtendAlong", hook_extend_along))
if not hook_extension:
hook_extension = "0.00 mm"
properties_values.append(("HookExtension", hook_extension))
setGroupPropertiesValues(
properties_values, SingleTieFourRebars.main_rebars_group
)
FreeCAD.ActiveDocument.recompute()
return SingleTieFourRebars