def configure(self):
mlog = logging.getLogger('ZdcRawChannelGetter.py::configure:')
mlog.info('entering')
from AthenaCommon.DetFlags import DetFlags
if not DetFlags.detdescr.ZDC_on():
mlog.info("not DetFlags.detdescr.Zdc_on : Quit.")
return False
if not DetFlags.makeRIO.ZDC_on():
mlog.info("not DetFlags.makeRIO.Zdc_on : Quit.")
return False
try:
from ZdcRec.ZdcRecConf import ZdcRec
self._zdcRecHandle = ZdcRec()
except Exception:
import traceback
mlog.error("could not get handle to ZdcRec")
mlog.error(traceback.format_exc())
return False
# output to ESD:
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addManyTypesStreamESD(self.output())
# output to AOD:
objKeyStore.addManyTypesStreamAOD(self.output())
# add to topsequence
mlog.info("now adding to topSequence")
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
topSequence += self.zdcRecHandle()
return True
def configure(self):
# from AthenaServices.AthenaServicesConf import AthenaOutputStream
# from AthenaCommon.AppMgr import ServiceMgr
# from AthenaCommon.AlgSequence import AlgSequence
# topSequence = AlgSequence()
# ### the following was gotten from the LVL1TriggerGetter not sure if needed when not simulation
# if not (TriggerFlags.fakeLVL1() or TriggerFlags.doLVL1()):
# DetFlags.readRIOPool.LVL1_setOn()
# # ***Temp : needed to enable required combination of thresholds
# # mu4,mu6,mu10,mu11,mu20,mu40
# # Will be replaced by config. from Lvl1ConfigSvc
# if hasattr(ServiceMgr,'RPCcablingSimSvc'):
# ServiceMgr.RPCcablingSimSvc.HackFor1031 = True
if jobproperties.Global.InputFormat() == 'bytestream':
theApp.Dlls += ["TrigT1Calo"]
include("TrigT1CaloByteStream/ReadLVL1CaloBS_jobOptions.py")
# ###
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
if recAlgs.doTrigger():
if (rec.doESD() or rec.doAOD()) and (not(rec.readAOD() or \
rec.readESD())):
if jobproperties.Global.InputFormat() == 'bytestream':
# Decode ROIB::RoIBResult from ByteStream
from TrigT1ResultByteStream.TrigT1ResultByteStreamConfig import L1ByteStreamDecodersRecExSetup
L1ByteStreamDecodersRecExSetup()
from AnalysisTriggerAlgs.AnalysisTriggerAlgsConfig import \
RoIBResultToAOD
topSequence += RoIBResultToAOD("RoIBResultToxAOD")
pass
pass
from TrigEDMConfig.TriggerEDM import getLvl1ESDList
objKeyStore.addManyTypesStreamESD(getLvl1ESDList())
from TrigEDMConfig.TriggerEDM import getLvl1AODList
objKeyStore.addManyTypesStreamAOD(getLvl1AODList())
return True
def configure(self):
log = logging.getLogger("HLTTriggerResultGetter.py")
from RecExConfig.ObjKeyStore import objKeyStore
# set EDMDecodingVersion
EDMDecodingVersion()
# Set AODFULL for data unless it was set explicitly already
if TriggerFlags.AODEDMSet.isDefault() and globalflags.DataSource(
) == 'data':
TriggerFlags.AODEDMSet = 'AODFULL'
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
log.info("BS unpacking (TF.readBS): %d", TriggerFlags.readBS())
if TriggerFlags.readBS():
if TriggerFlags.EDMDecodingVersion() <= 2:
bs = ByteStreamUnpackGetterRun2() # noqa: F841
else:
bs = ByteStreamUnpackGetter() # noqa: F841
xAODContainers = {}
# if not recAlgs.doTrigger(): #only convert when running on old data
if TriggerFlags.EDMDecodingVersion() == 1:
xaodcnvrt = xAODConversionGetter()
xAODContainers = xaodcnvrt.xaodlist
if recAlgs.doTrigger() or TriggerFlags.doTriggerConfigOnly():
if TriggerFlags.EDMDecodingVersion() <= 2:
tdt = TrigDecisionGetterRun2() # noqa: F841
else:
tdt = TrigDecisionGetter() # noqa: F841
# Temporary hack to add Run-3 navigation to ESD and AOD
if (rec.doESD()
or rec.doAOD()) and TriggerFlags.EDMDecodingVersion() == 3:
# The hack with wildcards is needed for BS->ESD because we don't know the exact keys
# of HLT navigation containers before unpacking them from the BS event.
objKeyStore._store['streamESD'].allowWildCard(True)
objKeyStore._store['streamAOD'].allowWildCard(True)
objKeyStore.addManyTypesStreamESD([
'xAOD::TrigCompositeContainer#HLTNav*',
'xAOD::TrigCompositeAuxContainer#HLTNav*'
])
objKeyStore.addManyTypesStreamAOD([
'xAOD::TrigCompositeContainer#HLTNav*',
'xAOD::TrigCompositeAuxContainer#HLTNav*'
])
# TrigJetRec additions
if rec.doWriteESD():
objKeyStore.addStreamESD("JetKeyDescriptor", "JetKeyMap")
objKeyStore.addStreamESD("JetMomentMap", "TrigJetRecMomentMap")
if rec.doWriteAOD():
objKeyStore.addStreamAOD("JetKeyDescriptor", "JetKeyMap")
objKeyStore.addStreamAOD("JetMomentMap", "TrigJetRecMomentMap")
# ID truth
if not rec.readESD() and (not rec.readAOD()) and TriggerFlags.doID() \
and rec.doTruth():
try:
from TrigInDetTruthAlgs.TrigInDetTruthAlgsConfig import \
TrigIDTruthMaker
topSequence += TrigIDTruthMaker()
except Exception:
log.warning("Couldn't set up the trigger ID truth maker")
pass
if rec.doESD() or rec.doAOD():
from TrigEDMConfig.TriggerEDM import getTrigIDTruthList
objKeyStore.addManyTypesStreamESD(
getTrigIDTruthList(TriggerFlags.ESDEDMSet()))
objKeyStore.addManyTypesStreamAOD(
getTrigIDTruthList(TriggerFlags.AODEDMSet()))
if (rec.doESD() or rec.doAOD()) and TriggerFlags.writeL1TopoValData():
objKeyStore.addManyTypesStreamESD([
'xAOD::TrigCompositeContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValData',
'xAOD::TrigCompositeAuxContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValDataAux.'
])
objKeyStore.addManyTypesStreamAOD([
'xAOD::TrigCompositeContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValData',
'xAOD::TrigCompositeAuxContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValDataAux.'
])
log.debug(
"HLT_xAOD__TrigCompositeContainer_L1TopoValData(Aux.) for L1Topo validation added to the data."
)
if rec.doAOD() or rec.doWriteAOD():
# schedule the RoiDescriptorStore conversion
# log.warning( "HLTTriggerResultGetter - setting up RoiWriter" )
roiWriter = RoiWriter()
# Add fictional input to ensure data dependency in AthenaMT
roiWriter.ExtraInputs += [("TrigBSExtractionOutput",
"StoreGateSvc+TrigBSExtractionOutput")]
topSequence += roiWriter
# write out the RoiDescriptorStores
from TrigEDMConfig.TriggerEDMRun2 import TriggerRoiList
objKeyStore.addManyTypesStreamAOD(TriggerRoiList)
#Are we adding operational info objects in ESD?
added = self._AddOPIToESD()
if added:
log.debug(
"Operational Info object HLT_EXPRESS_OPI_HLT with extra information about express stream prescaling added to the data."
)
# ESD objects definitions
_TriggerESDList = {}
from TrigEDMConfig.TriggerEDM import getTriggerEDMList
# we have to store xAOD containers in the root file, NOT AOD,
# if the xAOD container list is not empty
if (xAODContainers):
_TriggerESDList.update(xAODContainers)
else:
_TriggerESDList.update(
getTriggerEDMList(TriggerFlags.ESDEDMSet(),
TriggerFlags.EDMDecodingVersion()))
log.info(
"ESD content set according to the ESDEDMSet flag: %s and EDM version %d",
TriggerFlags.ESDEDMSet(), TriggerFlags.EDMDecodingVersion())
# AOD objects choice
_TriggerAODList = {}
#from TrigEDMConfig.TriggerEDM import getAODList
_TriggerAODList.update(
getTriggerEDMList(TriggerFlags.AODEDMSet(),
TriggerFlags.EDMDecodingVersion()))
log.info(
"AOD content set according to the AODEDMSet flag: %s and EDM version %d",
TriggerFlags.AODEDMSet(), TriggerFlags.EDMDecodingVersion())
log.debug("ESD EDM list: %s", _TriggerESDList)
log.debug("AOD EDM list: %s", _TriggerAODList)
# Highlight what is in AOD list but not in ESD list, as this can cause
# the "different number of entries in branch" problem, when it is in the
# AOD list but the empty container per event is not created
# Just compares keys of dicts, which are the class names, not their string keys in StoreGate
not_in = [
element for element in _TriggerAODList
if element not in _TriggerESDList
]
if (len(not_in) > 0):
log.warning("In AOD list but not in ESD list: ")
log.warning(not_in)
else:
log.info("AOD list is subset of ESD list - good.")
def _addSlimming(stream, edm):
from TrigNavTools.TrigNavToolsConfig import navigationThinningSvc
edmlist = list(y.split('-')[0] for x in edm.values()
for y in x) #flatten names
svc = navigationThinningSvc({
'name': 'HLTNav_%s' % stream,
'mode': 'cleanup',
'result': 'HLTResult_HLT',
'features': edmlist
})
from OutputStreamAthenaPool.CreateOutputStreams import registerTrigNavThinningSvc
registerTrigNavThinningSvc(stream, svc)
log.info("Configured slimming of HLT for %s", stream)
print(svc) # noqa: ATL901
del edmlist
if TriggerFlags.doNavigationSlimming() and rec.readRDO(
) and rec.doWriteAOD():
_addSlimming('StreamAOD',
_TriggerESDList) #Use ESD item list also for AOD!
log.info("configured navigation slimming for AOD output")
if TriggerFlags.doNavigationSlimming() and rec.readRDO(
) and rec.doWriteESD():
_addSlimming('StreamESD', _TriggerESDList)
log.info("configured navigation slimming for ESD output")
objKeyStore.addManyTypesStreamESD(_TriggerESDList)
objKeyStore.addManyTypesStreamAOD(_TriggerAODList)
return True
def configure(self):
mlog = logging.getLogger('TauCoreBuilder.py::configure:')
mlog.info('entering')
from RecExConfig.RecFlags import rec
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addManyTypesStreamESD(self._output)
objKeyStore.addManyTypesStreamAOD(self._output)
objKeyStore.addManyTypesTransient(self._output)
import tauRec.TauAlgorithmsHolder as taualgs
from tauRec.tauRecFlags import tauFlags
#switch off TJVA if jet reco don't use tracks.
from JetRec.JetRecFlags import jetFlags
if not tauFlags.isStandalone() and not jetFlags.useTracks():
self.do_TJVA = False # switch off TJVA
tools = []
try:
tools.append(taualgs.getJetSeedBuilder())
# run vertex finder only in case vertexing is available. This check can also be done in TauAlgorithmsHolder instead doing it here.
from InDetRecExample.InDetJobProperties import InDetFlags
from tauRec.tauRecFlags import jobproperties
doMVATrackClassification = jobproperties.tauRecFlags.tauRecMVATrackClassification(
)
doRNNTrackClassification = jobproperties.tauRecFlags.tauRecRNNTrackClassification(
)
if tauFlags.isStandalone() or InDetFlags.doVertexFinding():
tools.append(
taualgs.getTauVertexFinder(doUseTJVA=self.do_TJVA))
tools.append(taualgs.getTauAxis())
tools.append(
taualgs.getTauTrackFinder(
removeDuplicateTracks=(not doMVATrackClassification)))
if doMVATrackClassification:
tools.append(taualgs.getTauTrackClassifier())
if not doMVATrackClassification and doRNNTrackClassification:
tools.append(taualgs.getTauTrackRNNClassifier())
if jobproperties.Beam.beamType() != "cosmics":
tools.append(
taualgs.getEnergyCalibrationLC(correctEnergy=True,
correctAxis=False,
postfix='_onlyEnergy'))
tools.append(taualgs.getCellVariables())
tools.append(taualgs.getElectronVetoVars())
tools.append(taualgs.getTauShotFinder())
if self.doPi0Clus:
tools.append(taualgs.getPi0ClusterFinder())
from tauRec.tauRecFlags import tauFlags
tools += tauFlags.tauRecToolsDevToolList()
except Exception:
mlog.error("could not append tools to TauBuilder")
traceback.print_exc()
return False
# run first part of Tau Builder
TauRecConfigured.WrapTauRecToolExecHandle(self, tool=tools)
return True
_TriggerESDList = {}
_TriggerAODList = {}
from TrigEDMConfig.TriggerEDM import getTriggerEDMList
_TriggerAODList.update(
getTriggerEDMList(TriggerFlags.AODEDMSet(),
TriggerFlags.EDMDecodingVersion()))
_TriggerESDList.update(
getTriggerEDMList(TriggerFlags.ESDEDMSet(),
TriggerFlags.EDMDecodingVersion()))
from TrigEDMConfig.TriggerEDM import getLvl1ESDList
from TrigEDMConfig.TriggerEDM import getLvl1AODList
from RecExConfig.ObjKeyStore import objKeyStore
from TrigEDMConfig.TriggerEDM import getTrigIDTruthList
objKeyStore.addManyTypesStreamESD(
getTrigIDTruthList(TriggerFlags.ESDEDMSet()))
objKeyStore.addManyTypesStreamAOD(
getTrigIDTruthList(TriggerFlags.AODEDMSet()))
objKeyStore.addManyTypesStreamESD(getLvl1ESDList())
objKeyStore.addManyTypesStreamAOD(getLvl1AODList())
objKeyStore.addManyTypesStreamESD(_TriggerESDList)
objKeyStore.addManyTypesStreamAOD(_TriggerAODList)
if rec.doFileMetaData():
metadataItems = [
"xAOD::TriggerMenuContainer#TriggerMenu",
"xAOD::TriggerMenuAuxContainer#TriggerMenuAux."
]
objKeyStore.addManyTypesMetaData(metadataItems)
if hasattr(runArgs, "inputRDO_FILTFile"):
rec.readRDO.set_Value_and_Lock(True)
globalflags.InputFormat.set_Value_and_Lock('pool')
athenaCommonFlags.PoolRDOInput.set_Value_and_Lock(
def configure(self):
mlog = logging.getLogger('TauRecRunner.py::configure:')
mlog.info('entering')
from RecExConfig.RecFlags import rec
# xxx ToDo: still needed?
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addManyTypesStreamESD(self._output)
objKeyStore.addManyTypesStreamAOD(self._output)
import tauRec.TauAlgorithmsHolder as taualgs
from tauRec.tauRecFlags import tauFlags
tools = []
try:
### TauRecPi0EflowProcessor ###
# Tools in this section were originally in TauRecPi0EflowProcessor
if self.doPi0Clus: tools.append(taualgs.getPi0ClusterCreator())
###############################
### TauRecVariablesProcessor ###
from InDetRecExample.InDetJobProperties import InDetFlags
# Tools in this section were originally in TauRecVariablesProcessor
if tauFlags.isStandalone() or InDetFlags.doVertexFinding():
tools.append(taualgs.getTauVertexVariables())
tools.append(taualgs.getTauCommonCalcVars())
tools.append(taualgs.getTauSubstructure())
if self.doPi0Clus:
tools.append(taualgs.getPi0ClusterScaler())
tools.append(taualgs.getPi0ScoreCalculator())
# SWITCHED OFF SELECTOR< SINCE NO CHARGED PFOS AVAILABLE ATM
tools.append(taualgs.getPi0Selector())
tools.append(
taualgs.getEnergyCalibrationLC(correctEnergy=False,
correctAxis=True,
postfix='_onlyAxis'))
# PanTau:
if tauFlags.doPanTau():
import PanTauAlgs.JobOptions_Main_PanTau as pantau
tools.append(pantau.getPanTau())
# these tools need pantau info
tools.append(taualgs.getCombinedP4FromRecoTaus())
if jobproperties.Beam.beamType() != "cosmics":
tools.append(taualgs.getMvaTESVariableDecorator())
tools.append(taualgs.getMvaTESEvaluator())
if tauFlags.doRunTauDiscriminant():
tools.append(taualgs.getTauIDVarCalculator())
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauJetBDT1P",
weightsFile="vars2016_pt_gamma_1p_isofix.root",
minNTracks=0,
maxNTracks=1)) #update config?
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauJetBDT3P",
weightsFile="vars2016_pt_gamma_3p_isofix.root",
minNTracks=2,
maxNTracks=1000)) #update config?
tools.append(taualgs.getTauWPDecoratorJetBDT())
tools.append(
taualgs.getTauJetRNNEvaluator(
"TauJetRNN",
NetworkFile1P="rnnid_mc16d_config_1p.json",
NetworkFile3P="rnnid_mc16d_config_3p.json",
OutputVarname="RNNJetScore",
MaxTracks=10,
MaxClusters=6))
tools.append(taualgs.getTauWPDecoratorJetRNN())
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauEleBDT_def",
weightsFile="",
outputVarName="BDTEleScore")) #just inits values
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauEleBDT_bar",
weightsFile="EleBDT1PBar.root",
minNTracks=1,
maxAbsTrackEta=1.37,
outputVarName="BDTEleScore")) #update config?
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauEleBDT_end1",
weightsFile="EleBDT1PEnd1.root",
minNTracks=1,
minAbsTrackEta=1.37,
maxAbsTrackEta=2.0,
outputVarName="BDTEleScore")) #update config?
tools.append(
taualgs.getTauJetBDTEvaluator(
"TauEleBDT_end23",
weightsFile="EleBDT1PEnd23.root",
minNTracks=1,
minAbsTrackEta=2.0,
maxAbsTrackEta=3.0,
outputVarName="BDTEleScore")) #update config?
tools.append(taualgs.getTauWPDecoratorEleBDT())
tools.append(taualgs.getTauDecayModeNNClassifier())
tools.append(taualgs.getTauEleOLRDecorator())
################################
from tauRec.tauRecFlags import tauFlags
tools += tauFlags.tauRecToolsDevToolList()
#self.TauBuilderToolHandle().Tools = tools
except Exception:
mlog.error("could not append tools to TauRunner")
traceback.print_exc()
return False
# run first part of Tau Builder
TauRecRunConfigured.WrapTauRecToolExecHandle(self, tool=tools)
return True
def configure(self):
log = logging.getLogger("HLTTriggerResultGetter.py")
from RecExConfig.ObjKeyStore import objKeyStore
# set EDMDecodingVersion
EDMDecodingVersion()
# Set AODFULL for data unless it was set explicitly already
if TriggerFlags.AODEDMSet.isDefault() and globalflags.DataSource()=='data':
TriggerFlags.AODEDMSet = 'AODFULL'
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
log.info("BS unpacking (TF.readBS): %d" % TriggerFlags.readBS() )
if TriggerFlags.readBS():
bs = ByteStreamUnpackGetter()
xAODContainers = {}
# if not recAlgs.doTrigger(): #only convert when running on old data
if TriggerFlags.EDMDecodingVersion()==1:
xaodcnvrt = xAODConversionGetter()
xAODContainers = xaodcnvrt.xaodlist
if recAlgs.doTrigger() or TriggerFlags.doTriggerConfigOnly():
tdt = TrigDecisionGetter()
# TrigJetRec additions
if rec.doWriteESD():
objKeyStore.addStreamESD("JetKeyDescriptor","JetKeyMap")
objKeyStore.addStreamESD("JetMomentMap","TrigJetRecMomentMap")
if rec.doWriteAOD():
objKeyStore.addStreamAOD("JetKeyDescriptor","JetKeyMap")
objKeyStore.addStreamAOD("JetMomentMap","TrigJetRecMomentMap")
# ID truth
if not rec.readESD() and (not rec.readAOD()) and TriggerFlags.doID() \
and rec.doTruth():
try:
from TrigInDetTruthAlgs.TrigInDetTruthAlgsConfig import \
TrigIDTruthMaker
topSequence += TrigIDTruthMaker()
except Exception:
log.warning( "Couldn't set up the trigger ID truth maker" )
pass
if rec.doESD() or rec.doAOD():
from TrigEDMConfig.TriggerEDM import getTrigIDTruthList
objKeyStore.addManyTypesStreamESD(getTrigIDTruthList(TriggerFlags.ESDEDMSet()))
objKeyStore.addManyTypesStreamAOD(getTrigIDTruthList(TriggerFlags.AODEDMSet()))
if (rec.doESD() or rec.doAOD()) and TriggerFlags.writeL1TopoValData():
objKeyStore.addManyTypesStreamESD(['xAOD::TrigCompositeContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValData',
'xAOD::TrigCompositeAuxContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValDataAux.'])
objKeyStore.addManyTypesStreamAOD(['xAOD::TrigCompositeContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValData',
'xAOD::TrigCompositeAuxContainer#HLT_xAOD__TrigCompositeContainer_L1TopoValDataAux.'])
log.debug("HLT_xAOD__TrigCompositeContainer_L1TopoValData(Aux.) for L1Topo validation added to the data.")
if rec.doAOD() or rec.doWriteAOD():
# schedule the RoiDescriptorStore conversion
# log.warning( "HLTTriggerResultGetter - setting up RoiWriter" )
topSequence += RoiWriter()
# write out the RoiDescriptorStores
from TrigEDMConfig.TriggerEDM import TriggerRoiList
objKeyStore.addManyTypesStreamAOD( TriggerRoiList )
#Are we adding operational info objects in ESD?
added=self._AddOPIToESD()
if added:
log.debug("Operational Info object HLT_EXPRESS_OPI_HLT with extra information about express stream prescaling added to the data.")
# ESD objects definitions
_TriggerESDList = {}
from TrigEDMConfig.TriggerEDM import getTriggerEDMList
# we have to store xAOD containers in the root file, NOT AOD,
# if the xAOD container list is not empty
if(xAODContainers):
_TriggerESDList.update( xAODContainers )
else:
_TriggerESDList.update( getTriggerEDMList(TriggerFlags.ESDEDMSet(), TriggerFlags.EDMDecodingVersion()) )
log.info("ESD content set according to the ESDEDMSet flag: %s and EDM version %d" % (TriggerFlags.ESDEDMSet() ,TriggerFlags.EDMDecodingVersion()) )
# AOD objects choice
_TriggerAODList = {}
#from TrigEDMConfig.TriggerEDM import getAODList
_TriggerAODList.update( getTriggerEDMList(TriggerFlags.AODEDMSet(), TriggerFlags.EDMDecodingVersion()) )
log.info("AOD content set according to the AODEDMSet flag: %s and EDM version %d" % (TriggerFlags.AODEDMSet(),TriggerFlags.EDMDecodingVersion()) )
log.debug("ESD EDM list: %s", _TriggerESDList)
log.debug("AOD EDM list: %s", _TriggerAODList)
# Highlight what is in AOD list but not in ESD list, as this can cause
# the "different number of entries in branch" problem, when it is in the
# AOD list but the empty container per event is not created
# Just compares keys of dicts, which are the class names, not their string keys in StoreGate
not_in = [ element for element in _TriggerAODList if element not in _TriggerESDList ]
if (len(not_in)>0):
log.warning("In AOD list but not in ESD list: ")
log.warning(not_in)
else:
log.info("AOD list is subset of ESD list - good.")
def _addSlimming(stream, thinningSvc, edm):
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
from TrigNavTools.TrigNavToolsConf import HLT__StreamTrigNavSlimming, HLT__TrigNavigationSlimming
from TrigNavTools.TrigNavToolsConfig import navigationSlimming
edmlist = list(y.split('-')[0] for x in edm.values() for y in x) #flatten names
# from HLT result drop unrecorded features
# slimmerHLT = HLT__StreamTrigNavSlimming('HLTNavSlimmer_%s'%stream)
slimmerHLT = HLT__TrigNavigationSlimming('TrigNavigationSlimmer_%s'%stream)
tHLT = navigationSlimming({'name':'HLTNav_%s'%stream, 'mode':'cleanup',
'ThinningSvc':thinningSvc, 'result':'HLTResult_HLT',
'features':edmlist})
#tHLT.SlimmingTool.OutputLevel=DEBUG
tHLT.ActInPlace=True
slimmerHLT.ThinningTool = tHLT
print slimmerHLT.ThinningTool
topSequence += slimmerHLT
log.info("Configured slimming of HLT")
del edmlist
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
from AthenaServices.Configurables import ThinningSvc, createThinningSvc
_doSlimming = True
if _doSlimming and rec.readRDO() and rec.doWriteAOD():
if not hasattr(svcMgr, 'ThinningSvc'): # if the default is there it is configured for AODs
svcMgr += ThinningSvc(name='ThinningSvc', Streams=['StreamAOD'])
_addSlimming('StreamAOD', svcMgr.ThinningSvc, _TriggerESDList ) #Use ESD item list also for AOD!
log.info("configured navigation slimming for AOD output")
if _doSlimming and rec.readRDO() and rec.doWriteESD(): #rec.doWriteESD() and not rec.readESD():
if not hasattr(svcMgr, 'ESDThinningSvc'):
svcMgr += ThinningSvc(name='ESDThinningSvc', Streams=['StreamESD']) # the default is configured for AODs
_addSlimming('StreamESD', svcMgr.ESDThinningSvc, _TriggerESDList )
log.info("configured navigation slimming for ESD output")
objKeyStore.addManyTypesStreamESD( _TriggerESDList )
objKeyStore.addManyTypesStreamAOD( _TriggerAODList )
return True