def configureExtrapolator(egammaExtrapolator):
# this turns off dynamic calculation of eloss in calorimeters
egammaExtrapolator.DoCaloDynamic = False
# all left to MaterialEffects/EnergyLossUpdators
from TrkExTools.TrkExToolsConf import (Trk__MaterialEffectsUpdator as
MaterialEffectsUpdator)
egammaMaterialEffectsUpdator = MaterialEffectsUpdator(
name='egammaMaterialEffectsUpdator')
egammaNoElossMaterialEffectsUpdator = MaterialEffectsUpdator(
name='egammaNoElossMaterialEffectsUpdator')
egammaNoElossMaterialEffectsUpdator.EnergyLoss = False
MyUpdators = []
MyUpdators += [egammaMaterialEffectsUpdator]
MyUpdators += [egammaNoElossMaterialEffectsUpdator]
MySubUpdators = []
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for Global
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for ID
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for BeamPipe
MySubUpdators += [egammaNoElossMaterialEffectsUpdator.name()] # for Calo
# for muon spectrometer
MySubUpdators += [egammaNoElossMaterialEffectsUpdator.name()]
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for cavern
# egamma RungeKutta Propagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import (
Trk__RungeKuttaPropagator as RkPropagator)
egammaRungeKuttaPropagator = RkPropagator(
name='egammaRungeKuttaPropagator')
# egamma STEP_Propagator with no material effects
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import (
Trk__STEP_Propagator as STEP_Propagator)
egammaNoMatSTEP_Propagator = STEP_Propagator(
name='egammaNoMatSTEP_Propagator')
egammaNoMatSTEP_Propagator.MaterialEffects = False
myPropagators = []
myPropagators += [egammaRungeKuttaPropagator]
myPropagators += [egammaNoMatSTEP_Propagator]
MySubPropagators = []
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for Global
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for ID
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for BeamPipe
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for Calo
MySubPropagators += [egammaNoMatSTEP_Propagator.name()] # for MS
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for cavern
egammaExtrapolator.MaterialEffectsUpdators = MyUpdators
egammaExtrapolator.SubMEUpdators = MySubUpdators
egammaExtrapolator.Propagators = myPropagators
egammaExtrapolator.SubPropagators = MySubPropagators
# egamma STEP with no eloss for calo intersections
egammaExtrapolator.STEP_Propagator = egammaNoMatSTEP_Propagator
def getGSFTrackFitter():
egRotCreator = TrackingCommon.getInDetRotCreator(name='egRotCreator',
private=True)
TrackingCommon.createAndAddCondAlg(
TrackingCommon.getRIO_OnTrackErrorScalingCondAlg,
'RIO_OnTrackErrorScalingCondAlg')
# get Rk propagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import (
Trk__RungeKuttaPropagator as Propagator)
egTrkPropagator = Propagator(name='egTrkPropagator')
egTrkPropagator.AccuracyParameter = 0.0001
# Setup the Navigator (default)
from TrkDetDescrSvc.AtlasTrackingGeometrySvc import (
AtlasTrackingGeometrySvc)
from TrkExTools.TrkExToolsConf import Trk__Navigator
egTrkNavigator = Trk__Navigator(
name='egTrkNavigator', TrackingGeometrySvc=AtlasTrackingGeometrySvc)
# Set up the GSF
from TrkGaussianSumFilter.TrkGaussianSumFilterConf import (
Trk__GsfMaterialMixtureConvolution)
GsfMaterialUpdator = Trk__GsfMaterialMixtureConvolution(
name='GsfMaterialUpdator', MaximumNumberOfComponents=12)
from TrkGaussianSumFilter.TrkGaussianSumFilterConf import (
Trk__GsfExtrapolator)
GsfExtrapolator = Trk__GsfExtrapolator(
name='GsfExtrapolator',
Propagators=[egTrkPropagator],
SearchLevelClosestParameters=10,
StickyConfiguration=True,
Navigator=egTrkNavigator,
GsfMaterialConvolution=GsfMaterialUpdator,
SurfaceBasedMaterialEffects=False)
from TrkGaussianSumFilter.TrkGaussianSumFilterConf import (
Trk__GaussianSumFitter)
GSFTrackFitter = Trk__GaussianSumFitter(
name='GSFTrackFitter',
ToolForExtrapolation=GsfExtrapolator,
ReintegrateOutliers=True,
MakePerigee=True,
RefitOnMeasurementBase=True,
DoHitSorting=True,
ToolForROTCreation=egRotCreator)
# --- end of fitter loading
return GSFTrackFitter
def TMEF_MuonCombinedPropagator(name='TMEF_MuonCombinedPropagator', **kwargs):
kwargs.setdefault('AccuracyParameter', 0.000001)
kwargs.setdefault('IncludeBgradients', True)
kwargs.setdefault('MaxStraightLineStep', 0.001)
kwargs.setdefault('MaxHelixStep', 0.001)
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator
return Trk__RungeKuttaPropagator(name, **kwargs)
def __init__(self, name = 'ConfiguredTrigL2_Extrapolator') :
Trk__Extrapolator.__init__(self, name)
from AthenaCommon.AppMgr import ToolSvc
from TrkDetDescrSvc.AtlasTrackingGeometrySvc import AtlasTrackingGeometrySvc
from IOVDbSvc.CondDB import conddb
if not (conddb.folderRequested( "/Indet/TrkErrorScaling" ) or conddb.folderRequested( "/Indet/Onl/TrkErrorScaling" )):
conddb.addFolderSplitOnline("INDET", "/Indet/Onl/TrkErrorScaling", "/Indet/TrkErrorScaling" )
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator
TrigL2_StepPropagator = Trk__STEP_Propagator(name = 'TrigL2_StepPropagator')
ToolSvc += TrigL2_StepPropagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator
TrigL2_RKPropagator = Trk__RungeKuttaPropagator(name = 'TrigL2_RKPropagator')
ToolSvc += TrigL2_RKPropagator
from InDetTrigRecExample.InDetTrigFlags import InDetTrigFlags
if InDetTrigFlags.propagatorType() is "STEP":
TrigL2_Propagator = TrigL2_StepPropagator
else:
TrigL2_Propagator = TrigL2_RKPropagator
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
AtlasTrackingGeometrySvc = svcMgr.AtlasTrackingGeometrySvc
from TrkExTools.TrkExToolsConf import Trk__Navigator
TrigL2_Navigator = Trk__Navigator(name = 'TrigL2_Navigator',TrackingGeometrySvc = AtlasTrackingGeometrySvc)
ToolSvc += TrigL2_Navigator
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator
TrigL2_MaterialUpdator = Trk__MaterialEffectsUpdator(name = "TrigL2_MaterialEffectsUpdator")
ToolSvc += TrigL2_MaterialUpdator
TrigL2_SubPropagators = []
TrigL2_SubUpdators = []
TrigL2_SubPropagators += [ TrigL2_Propagator.name() ]
TrigL2_SubUpdators += [ TrigL2_MaterialUpdator.name() ]
TrigL2_SubPropagators += [ TrigL2_Propagator.name() ]
TrigL2_SubUpdators += [ TrigL2_MaterialUpdator.name() ]
TrigL2_SubPropagators += [ TrigL2_StepPropagator.name() ]
TrigL2_SubUpdators += [ TrigL2_MaterialUpdator.name() ]
self.Propagators = [ TrigL2_RKPropagator, TrigL2_StepPropagator]
self.MaterialEffectsUpdators = [ TrigL2_MaterialUpdator ]
self.Navigator = TrigL2_Navigator
self.SubPropagators = TrigL2_SubPropagators
self.SubMEUpdators = TrigL2_SubUpdators
#
#
# Extrapolator to be used for tracking inside egamma i.e GSF , conversions
# Set up AtlasExtrapolator
if not hasattr(ToolSvc, 'AtlasExtrapolator'):
from TrkExTools.AtlasExtrapolator import AtlasExtrapolator
ToolSvc += AtlasExtrapolator()
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
AtlasTrackingGeometrySvc = svcMgr.AtlasTrackingGeometrySvc
# get propagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator
#
egTrkPropagator = Propagator(name='egTrkPropagator')
egTrkPropagator.AccuracyParameter = 0.0001
ToolSvc += egTrkPropagator
#
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as StepPropagator
egTrkStepPropagator = StepPropagator(name='egTrkStepPropagator')
ToolSvc += egTrkStepPropagator
# Setup the Navigator (default)
from TrkExTools.TrkExToolsConf import Trk__Navigator
egTrkNavigator = Trk__Navigator(name='egTrkNavigator')
ToolSvc += egTrkNavigator
# Setup the MaterialEffectsUpdator
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator
# declare the extrapolator
#
from TrkMagFieldTools.TrkMagFieldToolsConf import Trk__MagneticFieldTool
ElectronTrkMagField = Trk__MagneticFieldTool('ElectronTrkMagField')
ToolSvc += ElectronTrkMagField
#
# set up geometry
#
include('TrkDetDescrSvc/AtlasTrackingGeometrySvc.py')
from __main__ import AtlasTrackingGeometrySvc
#
# get propagator
#
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator
#
ElectronTrkPropagator = Propagator(name='ElectronTrkPropagator')
ElectronTrkPropagator.AccuracyParameter = 0.0001
ToolSvc += ElectronTrkPropagator
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as StepPropagator
ElectronTrkStepPropagator = StepPropagator(name='ElectronTrkStepPropagator')
ToolSvc += ElectronTrkStepPropagator
#
# Setup the Navigator (default, could be removed)
#
from TrkExTools.TrkExToolsConf import Trk__Navigator
ElectronTrkNavigator = Trk__Navigator(
name='ElectronTrkNavigator',
#TrackingGeometrySvc = AtlasTrackingGeometrySvc
)
ToolSvc += ElectronTrkNavigator
) + '.C' ToolSvc += TrackingVolumeDisplayer # PROPAGATOR DEFAULTS -------------------------------------------------------------------------------------- TestEnergyLossUpdator = [] from TrkExTools.TrkExToolsConf import Trk__EnergyLossUpdator AtlasEnergyLossUpdator = Trk__EnergyLossUpdator(name="AtlasEnergyLossUpdator") ToolSvc += AtlasEnergyLossUpdator ToolSvc.AtlasEnergyLossUpdator.DetailedEloss = True TestEnergyLossUpdator += [AtlasEnergyLossUpdator] TestPropagators = [] from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator TestPropagator = Propagator(name='TestPropagator') ToolSvc += TestPropagator TestPropagators += [TestPropagator] from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator TestSTEP_Propagator = STEP_Propagator(name='TestSTEP_Propagator') ToolSvc += TestSTEP_Propagator TestSTEP_Propagator.DetailedEloss = True TestPropagators += [TestSTEP_Propagator] # UPDATOR DEFAULTS ----------------------------------------------------------------------------------------- TestUpdators = []
###############################################################################
if not 'doMEOTP' in dir():
doMEOTP = False
### Setup extrapolator ###
if (doMEOTP):
### Configure Material Effects On Track Provider (usually this is not done) ###
include(
'CaloMaterialEffectsOnTrackProvider/CaloMaterialEffectsOnTrackProvider.py'
)
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator
CaloTrkMuId_MaterialUpdator = Trk__MaterialEffectsUpdator()
ToolSvc += CaloTrkMuId_MaterialUpdator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator
CaloTrkMuId_Propagator = Trk__RungeKuttaPropagator()
ToolSvc += CaloTrkMuId_Propagator
from TrkExTools.AtlasExtrapolator import AtlasExtrapolator
CaloTrkMuIdTools_Extrapolator = AtlasExtrapolator(
name='CaloTrkMuIdTools_Extrapolator')
CaloTrkMuIdTools_Extrapolator.DoCaloDynamic = True
CaloTrkMuIdTools_Extrapolator.Propagators = [CaloTrkMuIdTools_Propagator]
CaloTrkMuIdTools_Extrapolator.MaterialEffectsUpdator = CaloTrkMuIdTools_MaterialUpdator
else:
### Use the public AtlasExtrapolator ###
from TrkExTools.AtlasExtrapolator import AtlasExtrapolator
CaloTrkMuIdTools_Extrapolator = AtlasExtrapolator()
ToolSvc += CaloTrkMuIdTools_Extrapolator
# job option fragment to enable InDetAlignNt for combined testbeam geometry
# in framework of RecExTB
# enables alignment ntuple production for InDetTB_Tracks (produced by
# straightline fitter)
#
theApp.Dlls += ["InDetAlignGenAlgs", "InDetAlignGenTools"]
theApp.TopAlg += ["InDetAlignNt"]
InDetAlignNt = Algorithm("InDetAlignNt")
InDetAlignNt.ReadAl = TRUE
InDetAlignNt.TRT = 1
InDetAlignNt.layout = 11
InDetAlignNt.truth = FALSE
InDetAlignNt.newtrk = True
InDetAlignNt.newtrkcol = "InDetTB_Tracks"
# setup extrapolator/propagator instance
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator
InDetAlignNtPropag = Propagator(name='InDetAlignNtPropag')
ToolSvc += InDetAlignNtPropag
from TrkExTools.TrkExToolsConf import Trk__Extrapolator
InDetAlignNtExtrap = Trk__Extrapolator(
name='InDetAlignNtExtrap',
Propagators=[InDetAlignNtPropag.getType()],
PropagatorInstances=[InDetAlignNtPropag.getName()])
ToolSvc += InDetAlignNtExtrap
InDetAlignNt.Extrapolator = InDetAlignNtExtrap
def __init__(self, name='AtlasExtrapolator'):
# get the correct TrackingGeometry setup
from TrkDetDescrSvc.AtlasTrackingGeometrySvc import AtlasTrackingGeometrySvc
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
AtlasTrackingGeometrySvc = svcMgr.AtlasTrackingGeometrySvc
# import the ToolSvc
from AthenaCommon.AppMgr import ToolSvc
if 'ToolSvc' not in dir():
ToolSvc = ToolSvc()
# PROPAGATOR DEFAULTS --------------------------------------------------------------------------------------
self.AtlasPropagators = []
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as RkPropagator
AtlasRungeKuttaPropagator = RkPropagator(
name='AtlasRungeKuttaPropagator')
ToolSvc += AtlasRungeKuttaPropagator
self.AtlasPropagators += [AtlasRungeKuttaPropagator]
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator
AtlasSTEP_Propagator = STEP_Propagator(name='AtlasSTEP_Propagator')
ToolSvc += AtlasSTEP_Propagator
self.AtlasPropagators += [AtlasSTEP_Propagator]
# UPDATOR DEFAULTS -----------------------------------------------------------------------------------------
self.AtlasUpdators = []
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
AtlasMaterialEffectsUpdator = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdator')
ToolSvc += AtlasMaterialEffectsUpdator
self.AtlasUpdators += [AtlasMaterialEffectsUpdator]
AtlasMaterialEffectsUpdatorLandau = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdatorLandau')
AtlasMaterialEffectsUpdatorLandau.LandauMode = True
ToolSvc += AtlasMaterialEffectsUpdatorLandau
self.AtlasUpdators += [AtlasMaterialEffectsUpdatorLandau]
# the UNIQUE NAVIGATOR ( === UNIQUE GEOMETRY) --------------------------------------------------------------
from TrkExTools.TrkExToolsConf import Trk__Navigator
AtlasNavigator = Trk__Navigator(name='AtlasNavigator')
AtlasNavigator.TrackingGeometrySvc = AtlasTrackingGeometrySvc
ToolSvc += AtlasNavigator
# CONFIGURE PROPAGATORS/UPDATORS ACCORDING TO GEOMETRY SIGNATURE
AtlasSubPropagators = []
AtlasSubUpdators = []
# -------------------- set it depending on the geometry ----------------------------------------------------
# default for Global is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for ID is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for BeamPipe is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for Calo is (STEP,Mat)
AtlasSubPropagators += [AtlasSTEP_Propagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for MS is (STEP,Mat)
AtlasSubPropagators += [AtlasSTEP_Propagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for Cavern is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# ----------------------------------------------------------------------------------------------------------
# call the base class constructor
Trk__Extrapolator.__init__(self,name,\
Navigator = AtlasNavigator,\
MaterialEffectsUpdators = self.AtlasUpdators,\
Propagators = self.AtlasPropagators,\
SubPropagators = AtlasSubPropagators,\
SubMEUpdators = AtlasSubUpdators,\
DoCaloDynamic = False
)
def __init__(self,name = 'Extrapolation', nameprefix = 'Atlas', ToolOutputLevel = None, TrackingGeometrySvc = None):
# get the correct TrackingGeometry setup
if not TrackingGeometrySvc :
from TrkDetDescrSvc.AtlasTrackingGeometrySvc import AtlasTrackingGeometrySvc
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
AtlasTrackingGeometrySvc = svcMgr.AtlasTrackingGeometrySvc
else :
AtlasTrackingGeometrySvc = TrackingGeometrySvc
# import the ToolSvc
from AthenaCommon.AppMgr import ToolSvc
if 'ToolSvc' not in dir() :
ToolSvc = ToolSvc()
# load the RungeKutta Propagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator
RungeKuttaPropagator = Trk__RungeKuttaPropagator(name = nameprefix+'RungeKuttaPropagator')
if ToolOutputLevel :
RungeKuttaPropagator.OutputLevel = ToolOutputLevel
ToolSvc += RungeKuttaPropagator
# from the Propagator create a Propagation engine to handle path length
from TrkExEngine.TrkExEngineConf import Trk__PropagationEngine
StaticPropagator = Trk__PropagationEngine(name = nameprefix+'StaticPropagation')
# give the tools it needs
StaticPropagator.Propagator = RungeKuttaPropagator
# configure output formatting
StaticPropagator.OutputPrefix = '[SP] - '
StaticPropagator.OutputPostfix = ' - '
if ToolOutputLevel :
StaticPropagator.OutputLevel = ToolOutputLevel
# add to tool service
ToolSvc += StaticPropagator
# load the material effects engine
from TrkExEngine.TrkExEngineConf import Trk__MaterialEffectsEngine
MaterialEffectsEngine = Trk__MaterialEffectsEngine(name = nameprefix+'MaterialEffects')
# configure output formatting
MaterialEffectsEngine.OutputPrefix = '[ME] - '
MaterialEffectsEngine.OutputPostfix = ' - '
#MaterialEffectsEngine.EnergyLossCorrection = False
if ToolOutputLevel :
MaterialEffectsEngine.OutputLevel = ToolOutputLevel
# add to tool service
ToolSvc += MaterialEffectsEngine
# load the static navigation engine
from TrkExEngine.TrkExEngineConf import Trk__StaticNavigationEngine
StaticNavigator = Trk__StaticNavigationEngine(name = nameprefix+'StaticNavigation')
# give the tools it needs
StaticNavigator.PropagationEngine = StaticPropagator
StaticNavigator.MaterialEffectsEngine = MaterialEffectsEngine
# Geometry name
StaticNavigator.TrackingGeometry = AtlasTrackingGeometrySvc.TrackingGeometryName
# configure output formatting
StaticNavigator.OutputPrefix = '[SN] - '
StaticNavigator.OutputPostfix = ' - '
if ToolOutputLevel :
StaticNavigator.OutputLevel = ToolOutputLevel
# add to tool service
ToolSvc += StaticNavigator
# load the Static ExtrapolationEngine
from TrkExEngine.TrkExEngineConf import Trk__StaticEngine
StaticExtrapolator = Trk__StaticEngine(name = nameprefix+'StaticExtrapolation')
# give the tools it needs
StaticExtrapolator.PropagationEngine = StaticPropagator
StaticExtrapolator.MaterialEffectsEngine = MaterialEffectsEngine
StaticExtrapolator.NavigationEngine = StaticNavigator
# configure output formatting
StaticExtrapolator.OutputPrefix = '[SE] - '
StaticExtrapolator.OutputPostfix = ' - '
if ToolOutputLevel :
StaticExtrapolator.OutputLevel = ToolOutputLevel
# add to tool service
ToolSvc += StaticExtrapolator
# call the base class constructor
ExEngine.__init__(self, name=nameprefix+'Extrapolation',\
ExtrapolationEngines = [ StaticExtrapolator ], \
PropagationEngine = StaticPropagator, \
NavigationEngine = StaticNavigator, \
TrackingGeometrySvc = AtlasTrackingGeometrySvc, \
OutputPrefix = '[ME] - ', \
OutputPostfix = ' - ')
# set the output level
if ToolOutputLevel :
self.OutputLevel = ToolOutputLevel
print '* [ Configuration : end ] *** AtlasTrackingGeometry ********************************'
# the navigator Configurable way
from TrkExTools.TrkExToolsConf import Trk__Navigator
CombinedNavigator = Trk__Navigator( name = 'CombinedNavigator',
TrackingGeometrySvc = AtlasTrackingGeometrySvc )
ToolSvc += CombinedNavigator
print CombinedNavigator
# PROPAGATOR DEFAULTS --------------------------------------------------------------------------------------
AtlasPropagators = []
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as RkPropagator
AtlasRungeKuttaPropagator = RkPropagator(name = 'AtlasRungeKuttaPropagator')
ToolSvc += AtlasRungeKuttaPropagator
AtlasPropagators += [AtlasRungeKuttaPropagator]
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator
AtlasSTEP_Propagator = STEP_Propagator(name = 'AtlasSTEP_Propagator')
ToolSvc += AtlasSTEP_Propagator
AtlasPropagators += [AtlasSTEP_Propagator]
# UPDATOR DEFAULTS -----------------------------------------------------------------------------------------
AtlasUpdators = []
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
ScaleHitUncertainty = 2.5
InDetRefitRotCreator = InDetRotCreator
from TrkMeasurementUpdator.TrkMeasurementUpdatorConf import Trk__KalmanUpdator
InDetUpdator = Trk__KalmanUpdator(name='InDetUpdator')
InDetUpdator.OutputLevel = OutputLevel
ToolSvc += InDetUpdator
print InDetUpdator
#
# get propagator
#
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator
InDetPropagator = Propagator(name='InDetPropagator')
ToolSvc += InDetPropagator
print InDetPropagator
#
# Setup the Navigator (default, could be removed)
#
from TrkExTools.TrkExToolsConf import Trk__Navigator
InDetNavigator = Trk__Navigator(name='InDetNavigator',
TrackingGeometrySvc=AtlasTrackingGeometrySvc)
ToolSvc += InDetNavigator
print InDetNavigator
#