def about(self):
popupText = 'Ground Control v' + str(self.data.version) + ' allows you to control the Maslow machine. ' + \
'From within Ground Control, you can move the machine to where you want to begin a cut, calibrate the machine, ' + \
'open and run a g-code file, or monitor the progress of an ongoing cut. For more details see the Maslow website ' + \
'at http://www.maslowcnc.com/. The source code can be downloaded at https://github.com/MaslowCNC. ' + \
'\n\n' + \
'GroundControl is part of the of the Maslow Control Software Copyright (C) 2014-2017 Bar Smith. ' + \
'This program is free software: you can redistribute it and/or modify ' + \
'it under the terms of the GNU General Public License as published by ' + \
'the Free Software Foundation, either version 3 of the License, or ' + \
'(at your option) any later version. ' + \
'\n\n' + \
'This program is distributed in the hope that it will be useful, ' + \
'but WITHOUT ANY WARRANTY; without even the implied warranty of ' + \
'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ' + \
'GNU General Public License for more details. ' + \
'\n\n' + \
'You should have received a copy of the GNU General Public License ' + \
'along with the Maslow Control Software. If not, see <http://www.gnu.org/licenses/>.'
content = ScrollableTextPopup(cancel=self.dismiss_popup,
text=popupText,
markup=True)
self._popup = Popup(title="About GroundControl",
content=content,
size_hint=(0.5, 0.5))
self._popup.open()
def show_gcode(self):
'''
Display the currently loaded gcode in a popup
It would be cool if you could run the program stepping through using this popup
'''
popupText = ""
if len(self.data.gcode) is 0:
popupText = "No gcode to display"
else:
for gcodeLine in self.data.gcode:
popupText = popupText + gcodeLine + "\n"
content = ScrollableTextPopup(cancel=self.dismiss_popup,
text=popupText)
self._popup = Popup(title="Gcode",
content=content,
size_hint=(0.9, 0.9))
self._popup.open()
def show_gcode(self):
'''
Display the currently loaded gcode in a popup
It would be cool if you could run the program stepping through using this popup
'''
popupText = ""
if len(self.data.gcode) is 0:
popupText = "No gcode to display"
else:
if self.page<=1:
line = 0
else:
line = (self.page-1)*447
popupText = "...\n...\n...\n"
if line>len(self.data.gcode):
line = len(self.data.gcode)-447
for lineNum, gcodeLine in enumerate(self.data.gcode):
if lineNum>=line and lineNum<line+447:
popupText = popupText + str(lineNum+1) + ': ' + gcodeLine + "\n"
elif lineNum>=line+447:
popupText = popupText + "...\n...\n...\n"
break
content = ScrollableTextPopup(cancel = self.dismiss_popup,
prev = self.show_gcode_prev,
next = self.show_gcode_next,
text = popupText)
titleString = 'Gcode File: ' + self.data.gcodeFile +'\nLines: '+str(line+1)+' - '+str(lineNum)+' of '+str(len(self.data.gcode))
self._popup = Popup(title=titleString, content=content,
size_hint=(0.9, 0.9))
self._popup.open()
