def __init__(self, bus, frequency=400000):
"""Initialization"""
self.deinit()
if detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.microchip_mcp2221:
from adafruit_blinka.microcontroller.mcp2221.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.greatfet_one:
from adafruit_blinka.microcontroller.nxp_lpc4330.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.any_embedded_linux:
from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C
else:
from machine import I2C as _I2C
from microcontroller.pin import i2cPorts
# try:
self._i2c = _I2C(bus_num=bus, mode=_I2C.MASTER, baudrate=frequency)
# except RuntimeError:
# raise IOError(f'Could not configure an IC2 bus on bus {bus}.')
if threading is not None:
self._lock = threading.RLock()
def init(self, scl, sda, frequency):
"""Initialization"""
self.deinit()
if detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.microchip_mcp2221:
from adafruit_blinka.microcontroller.mcp2221.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.greatfet_one:
from adafruit_blinka.microcontroller.nxp_lpc4330.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.any_embedded_linux:
from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C
else:
from machine import I2C as _I2C
from microcontroller.pin import i2cPorts
for portId, portScl, portSda in i2cPorts:
try:
if scl == portScl and sda == portSda:
self._i2c = _I2C(portId,
mode=_I2C.MASTER,
baudrate=frequency)
break
except RuntimeError:
pass
else:
raise ValueError(
"No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format(
(scl, sda), i2cPorts))
if threading is not None:
self._lock = threading.RLock()
def init(self, scl, sda, frequency):
"""Initialization"""
self.deinit()
if detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.microchip_mcp2221:
from adafruit_blinka.microcontroller.mcp2221.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.greatfet_one:
from adafruit_blinka.microcontroller.nxp_lpc4330.i2c import I2C as _I2C
self._i2c = _I2C(frequency=frequency)
return
if detector.board.pico_u2if:
from adafruit_blinka.microcontroller.pico_u2if.i2c import I2C as _I2C
self._i2c = _I2C(scl, sda, frequency=frequency)
return
if detector.chip.id == ap_chip.RP2040:
from adafruit_blinka.microcontroller.rp2040.i2c import I2C as _I2C
self._i2c = _I2C(scl, sda, frequency=frequency)
return
if detector.board.any_embedded_linux:
from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C
else:
from adafruit_blinka.microcontroller.generic_micropython.i2c import (
I2C as _I2C, )
from microcontroller.pin import i2cPorts
for portId, portScl, portSda in i2cPorts:
try:
# pylint: disable=unexpected-keyword-arg
if scl == portScl and sda == portSda:
self._i2c = _I2C(portId,
mode=_I2C.MASTER,
baudrate=frequency)
break
# pylint: enable=unexpected-keyword-arg
except RuntimeError:
pass
else:
raise ValueError(
"No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format(
(scl, sda), i2cPorts))
if threading is not None:
self._lock = threading.RLock()