def connect_io(self):
print('Connecting adafruit io...')
self.io = RESTClient(secrets['aio_username'], secrets['aio_key'], self.wifi)
self.feed_start_time_f = self.io.get_feed('feed-start')
self.feed_end_time_f = self.io.get_feed('feed-end')
self.feed_count_f = self.io.get_feed('feed-count')
print('Done.')
def __init__(self, name):
"""Create an instance."""
# PyPortal ESP32 Setup
esp32_cs = DigitalInOut(board.ESP_CS)
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
self._io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
self._name = '{0}-logging'.format(name)
try:
# Get the logging feed from Adafruit IO
self._log_feed = self._io.get_feed(self._name)
except AdafruitIO_RequestError:
# If no logging feed exists, create one
self._log_feed = self._io.create_new_feed(self._name)
def push_to_io(self, feed_key, data):
# pylint: disable=line-too-long
"""Push data to an adafruit.io feed
:param str feed_key: Name of feed key to push data to.
:param data: data to send to feed
"""
# pylint: enable=line-too-long
try:
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
except KeyError:
raise KeyError("Adafruit IO secrets are kept in secrets.py, please add them there!\n\n")
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(self._esp, secrets, None)
io_client = RESTClient(aio_username, aio_key, wifi)
while True:
try:
feed_id = io_client.get_feed(feed_key)
except AdafruitIO_RequestError:
# If no feed exists, create one
feed_id = io_client.create_new_feed(feed_key)
except RuntimeError as exception:
print("An error occured, retrying! 1 -", exception)
continue
break
while True:
try:
io_client.send_data(feed_id['key'], data)
except RuntimeError as exception:
print("An error occured, retrying! 2 -", exception)
continue
except NameError as exception:
print(feed_id['key'], data, exception)
continue
break
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
# Random Data ID
# (to obtain this value, visit
# https://io.adafruit.com/services/words
# and copy over the location ID)
random_data_id = 1234
while True:
try:
print('Fetching random data from Adafruit IO...')
random_data = io.receive_random_data(random_data_id)
print('Random Data: ', random_data['value'])
print('Data Seed: ', random_data['seed'])
print('Waiting 1 minute to fetch new randomized data...')
except (ValueError, RuntimeError) as e:
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# Create a new group
print('Creating a new Adafruit IO Group...')
sensor_group = io.create_new_group('envsensors',
'a group of environmental sensors')
# Add the 'temperature' feed to the group
print('Adding feed temperature to group...')
io.add_feed_to_group(sensor_group['key'], 'temperature')
# Get info from the group
print(sensor_group)
# Delete the group
print('Deleting group...')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
# Weather Location ID
# (to obtain this value, visit
# https://io.adafruit.com/services/weather
# and copy over the location ID)
location_id = 1234
print('Getting weather record from IO...')
# Get the specified weather record with current weather
# and all available forecast information.
forecast = io.receive_weather(location_id)
# Get today's forecast
current_forecast = forecast['current']
print('It is {0} and {1}*F.'.format(current_forecast['summary'],
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
# Create a new group
print('Creating a new Adafruit IO Group...')
sensor_group = io.create_new_group('envsensors', 'a group of environmental sensors')
# Add the 'temperature' feed to the group
print('Adding feed temperature to group...')
io.add_feed_to_group(sensor_group['key'], 'temperature')
# Get info from the group
print(sensor_group)
# Delete the group
print('Deleting group...')
io.delete_group('envsensors')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# Weather Location ID
# (to obtain this value, visit
# https://io.adafruit.com/services/weather
# and copy over the location ID)
location_id = 1234
print('Getting weather record from IO...')
# Get the specified weather record with current weather
# and all available forecast information.
forecast = io.receive_weather(location_id)
# Get today's forecast
current_forecast = forecast['current']
print('It is {0} and {1}*F.'.format(current_forecast['summary'],
esp32_ready = digitalio.DigitalInOut(board.ESP_BUSY)
esp32_reset = digitalio.DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
# Get the weight feed from IO
weight_feed = io.get_feed('weight')
# initialize the dymo scale
units_pin = digitalio.DigitalInOut(board.D3)
units_pin.switch_to_output()
dymo = adafruit_dymoscale.DYMOScale(board.D4, units_pin)
# take a reading of the current time, used for toggling the device out of sleep
time_stamp = time.monotonic()
while True:
try:
reading = dymo.weight
esp32_ready = DigitalInOut(board.D10)
esp32_reset = DigitalInOut(board.D5)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'light' feed from Adafruit IO
light_feed = io.get_feed('light')
except AdafruitIO_RequestError:
# If no 'light' feed exists, create one
light_feed = io.create_new_feed('light')
# Set up an analog light sensor on the PyPortal
adc = AnalogIn(board.LIGHT)
while True:
light_value = adc.value
print('Light Level: ', light_value)
print('Sending to Adafruit IO...')
try:
ADAFRUIT_IO_USER = secrets['aio_username']
ADAFRUIT_IO_KEY = secrets['aio_key']
OPEN_WEATHER_KEY = secrets['open_weather_key']
except KeyError:
raise KeyError(
'To use this code, you need to include your Adafruit IO username \
and password in a secrets.py file on the CIRCUITPY drive.')
# use https://openweathermap.org/find?q= to get city IDs
# then set both city IDs below
CITY_1_ID = '2641673'
CITY_2_ID = '658225'
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# init. graphics helper
gfx = thermometer_helper.Thermometer_GFX(celsius=True)
# init. adt7410
i2c_bus = busio.I2C(board.SCL, board.SDA)
adt = adafruit_adt7410.ADT7410(i2c_bus, address=0x48)
adt.high_resolution = True
# init. the light sensor
light_sensor = AnalogIn(board.LIGHT)
def set_backlight(val):
"""Adjust the TFT backlight.
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
try:
ADAFRUIT_IO_USER = secrets['aio_username']
ADAFRUIT_IO_KEY = secrets['aio_key']
except KeyError:
raise KeyError(
'To use this code, you need to include your Adafruit IO username \
and password in a secrets.py file on the CIRCUITPY drive.')
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# Get the temperature feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
# init. graphics helper
gfx = thermometer_helper.Thermometer_GFX(celsius=False)
# init. adt7410
i2c_bus = busio.I2C(board.SCL, board.SDA)
adt = adafruit_adt7410.ADT7410(i2c_bus, address=0x48)
adt.high_resolution = True
# init. the light sensor
light_sensor = AnalogIn(board.LIGHT)
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'temperature' feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
light_feed = io.get_feed('light')
except AdafruitIO_RequestError:
# If no 'temperature' feed exists, create one
temperature_feed = io.create_new_feed('temperature')
light_feed = io.create_new_feed('light')
# Set up ADT7410 sensor
i2c_bus = busio.I2C(board.SCL, board.SDA)
adt = adafruit_adt7410.ADT7410(i2c_bus, address=0x48)
adt.high_resolution = True
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['aio_username']
ADAFRUIT_IO_KEY = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# create an i2c object
i2c = busio.I2C(board.SCL, board.SDA)
# instantiate the sensor objects
veml = adafruit_veml6075.VEML6075(i2c, integration_time=100)
sgp30 = adafruit_sgp30.Adafruit_SGP30(i2c)
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
# change this to match the location's pressure (hPa) at sea level
bme280.sea_level_pressure = 1013.25
# init. the graphics helper
gfx = weatherstation_helper.WeatherStation_GFX()
# init. the ADC
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'location' feed from Adafruit IO
location_feed = io.get_feed('location')
except AdafruitIO_RequestError:
# If no 'location' feed exists, create one
location_feed = io.create_new_feed('location')
# Set data
data_value = 42
# Set up metadata associated with data_value
metadata = {'lat': 40.726190, 'lon': -74.005334, 'ele': -6, 'created_at': None}
# Send data and location metadata to the 'location' feed
esp32_ready = DigitalInOut(board.D10)
esp32_reset = DigitalInOut(board.D5)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
try:
# Get the 'light' feed from Adafruit IO
light_feed = io.get_feed('light')
except AdafruitIO_RequestError:
# If no 'light' feed exists, create one
light_feed = io.create_new_feed('light')
# Set up an analog light sensor on the PyPortal
adc = AnalogIn(board.LIGHT)
while True:
light_value = adc.value
print('Light Level: ', light_value)
print('Sending to Adafruit IO...')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'digital' feed from Adafruit IO
digital_feed = io.get_feed('digital')
except AdafruitIO_RequestError:
# If no 'digital' feed exists, create one
digital_feed = io.create_new_feed('digital')
# Set up LED
LED = DigitalInOut(board.D13)
LED.direction = Direction.OUTPUT
while True:
# Get data from 'digital' feed
print('getting data from IO...')
esp = adafruit_espatcontrol.ESP_ATcontrol(uart,
115200,
reset_pin=resetpin,
rts_pin=rtspin,
debug=False)
wifi = adafruit_espatcontrol_wifimanager.ESPAT_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
try:
# Get the 'temperature' feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
except AdafruitIO_RequestError:
# If no 'temperature' feed exists, create one
temperature_feed = io.create_new_feed('temperature')
# Send random integer values to the feed
random_value = randint(0, 50)
print('Sending {0} to temperature feed...'.format(random_value))
io.send_data(temperature_feed['key'], random_value)
print('Data sent!')
# Retrieve data value from the feed
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1,
brightness=0.2) # Uncomment for Most Boards
"""Uncomment below for ItsyBitsy M4"""
#status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
try:
# Get the 'location' feed from Adafruit IO
location_feed = io.get_feed('location')
except AdafruitIO_RequestError:
# If no 'location' feed exists, create one
location_feed = io.create_new_feed('location')
# Set data
data_value = 42
# Set up metadata associated with data_value
metadata = {'lat': 40.726190, 'lon': -74.005334, 'ele': -6, 'created_at': None}
# Send data and location metadata to the 'location' feed
class BabyClock:
def __init__(self):
self.splash = displayio.Group(max_size=5)
self.bg_group = displayio.Group(max_size=1)
board.DISPLAY.auto_brightness = True
self.bg_file = None
self.texts = []
# touchscreen
self.touchscreen = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000),(5800, 57000)),
size=(320, 240))
# connecting wifi
self.wifi = connect_wifi()
# connecting io
self.connect_io()
# setting local time
set_local_time()
# getting last feed time from adafruit io
self.prev_feed_end_time, self.prev_feed_start_time, self.prev_feed_count = self.get_last_feed_time()
board.DISPLAY.show(self.splash)
def connect_io(self):
print('Connecting adafruit io...')
self.io = RESTClient(secrets['aio_username'], secrets['aio_key'], self.wifi)
self.feed_start_time_f = self.io.get_feed('feed-start')
self.feed_end_time_f = self.io.get_feed('feed-end')
self.feed_count_f = self.io.get_feed('feed-count')
print('Done.')
"""Send feed time with count of the day to adafruit io
"""
def new_feed_time(self):
print('Loading history...')
received_data = self.io.receive_data(self.feed_time_f['key'])
print('Data from temperature feed: ', received_data['value'])
"""Get from adafruit io last feed time & count
"""
def get_last_feed_time(self):
data = self.io.receive_data(self.feed_start_time_f['key'])
prev_feed_start_time = str_to_time(data['value'])
data = self.io.receive_data(self.feed_end_time_f['key'])
prev_feed_end_time = str_to_time(data['value'])
data = self.io.receive_data(self.feed_count_f['key'])
prev_feed_count = int(data['value'])
return prev_feed_end_time, prev_feed_start_time, prev_feed_count
def clear_display(self):
# remove all from group
while self.bg_group:
self.bg_group.pop()
while self.splash:
self.splash.pop()
self.splash.append(self.bg_group)
self.texts = []
def set_background(self, image_file):
# close if open
if self.bg_file:
self.bg_file.close()
self.bck_file = open(image_file, 'rb')
bg = displayio.OnDiskBitmap(self.bck_file)
bg_sprite = displayio.TileGrid(bg, pixel_shader=displayio.ColorConverter(), x=0, y=0)
self.bg_group.append(bg_sprite)
board.DISPLAY.refresh_soon()
board.DISPLAY.wait_for_frame()
def set_to_info(self, max_glyphs=2):
self.dim_down()
self.clear_display()
self.set_background('back_info.bmp')
# hour since, min since, count
positions = [(210,45),(250,45),(230,110)]
font = bitmap_font.load_font('/fonts/Nunito-Black-17.bdf')
#font.load_glyphs(b'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz')
font.load_glyphs(b'0123456789:/-_,. ')
for x, y in positions:
text = Label(font, text='', max_glyphs=max_glyphs)
text.x = x
text.y = y
text.color = 0x000000
self.splash.append(text)
self.texts.append(text)
# :
text = Label(font, text=':')
text.x = 238
text.y = 43
text.color =0x000000
self.splash.append(text)
self.dim_up()
def set_to_timer(self):
self.dim_down()
self.feed_start_time = time.localtime()
if self.feed_start_time.tm_mday != self.prev_feed_start_time.tm_mday:
self.prev_feed_count = 0
self.clear_display()
self.set_background('back_timer.bmp')
# hour since, min since, sec_since
positions = [(100-50+10,120),(220-50+10,120)]
font = bitmap_font.load_font('/fonts/Nunito-Light-75.bdf')
#font.load_glyphs(b'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz')
font.load_glyphs(b'0123456789: ')
for x, y in positions:
text = Label(font, text='', max_glyphs=2)
text.x = x
text.y = y
text.color = 0xffffff # white
self.splash.append(text)
self.texts.append(text)
# add : between numbers
text = Label(font, text=':')
text.x = 160-7
text.y = 120-5
text.color = 0xffffff # white
self.splash.append(text)
self.dim_up()
def set_texts(self, texts):
for text_area, text in zip(self.texts, texts):
text_area.text = str(text)
def dim_down(self):
board.DISPLAY.auto_brightness = False
for i in range(100, -1, -1): # dim down
board.DISPLAY.brightness = i/100
time.sleep(0.005)
def dim_up(self):
board.DISPLAY.auto_brightness = False
for i in range(101): # dim down
board.DISPLAY.brightness = (i)/100
time.sleep(0.005)
board.DISPLAY.auto_brightness = True
def send_to_io(self):
# feed_start_time
# feed_end_time
# count
# set previous
self.prev_feed_end_time = time.localtime()
self.prev_feed_start_time = self.feed_start_time
self.prev_feed_count += 1
# send to io
self.io.send_data(self.feed_start_time_f['key'], time_to_str(self.feed_start_time))
self.io.send_data(self.feed_end_time_f['key'], time_to_str(self.prev_feed_end_time))
self.io.send_data(self.feed_count_f['key'], self.prev_feed_count)
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# Create a new 'circuitpython' feed with a description
print('Creating new Adafruit IO feed...')
feed = io.create_new_feed('circuitpython', 'a Adafruit IO CircuitPython feed')
# List a specified feed
print('Retrieving new Adafruit IO feed...')
specified_feed = io.get_feed('circuitpython')
print(specified_feed)
# Delete a specified feed by feed key
print('Deleting feed...')
io.delete_feed(specified_feed['key'])
print('Feed deleted!')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
try:
# Get the 'digital' feed from Adafruit IO
digital_feed = io.get_feed('digital')
except AdafruitIO_RequestError:
# If no 'digital' feed exists, create one
digital_feed = io.create_new_feed('digital')
# Set up LED
LED = DigitalInOut(board.D13)
LED.direction = Direction.OUTPUT
while True:
# Get data from 'digital' feed
print('getting data from IO...')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
try:
# Get the 'temperature' feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
except AdafruitIO_RequestError:
# If no 'temperature' feed exists, create one
temperature_feed = io.create_new_feed('temperature')
# Set up ADT7410 sensor
i2c_bus = busio.I2C(board.SCL, board.SDA)
adt = adafruit_adt7410.ADT7410(i2c_bus, address=0x48)
adt.high_resolution = True
while True:
try:
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'temperature' feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
except AdafruitIO_RequestError:
# If no 'temperature' feed exists, create one
temperature_feed = io.create_new_feed('temperature')
# Send random integer values to the feed
random_value = randint(0, 50)
print('Sending {0} to temperature feed...'.format(random_value))
io.send_data(temperature_feed['key'], random_value)
print('Data sent!')
# Retrieve data value from the feed
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
try:
# Get the 'temperature' feed from Adafruit IO
temperature_feed = io.get_feed('temperature')
except AdafruitIO_RequestError:
# If no 'temperature' feed exists, create one
temperature_feed = io.create_new_feed('temperature')
# Set up ADT7410 sensor
i2c_bus = busio.I2C(board.SCL, board.SDA)
adt = adafruit_adt7410.ADT7410(i2c_bus, address=0x48)
adt.high_resolution = True
while True:
try:
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
aio_username = secrets['aio_username']
aio_key = secrets['aio_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(aio_username, aio_key, wifi)
# Create a new 'circuitpython' feed with a description
print('Creating new Adafruit IO feed...')
feed = io.create_new_feed('circuitpython', 'a Adafruit IO CircuitPython feed')
# List a specified feed
print('Retrieving new Adafruit IO feed...')
specified_feed = io.get_feed('circuitpython')
print(specified_feed)
# Delete a specified feed by feed key
print('Deleting feed...')
io.delete_feed(specified_feed['key'])
print('Feed deleted!')
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)
"""
# Set your Adafruit IO Username and Key in secrets.py
# (visit io.adafruit.com if you need to create an account,
# or if you need your Adafruit IO key.)
ADAFRUIT_IO_USER = secrets['adafruit_io_user']
ADAFRUIT_IO_KEY = secrets['adafruit_io_key']
# Create an instance of the Adafruit IO REST client
io = RESTClient(ADAFRUIT_IO_USER, ADAFRUIT_IO_KEY, wifi)
# Random Data ID
# (to obtain this value, visit
# https://io.adafruit.com/services/words
# and copy over the location ID)
random_data_id = 1234
while True:
try:
print('Fetching random data from Adafruit IO...')
random_data = io.receive_random_data(random_data_id)
print('Random Data: ', random_data['value'])
print('Data Seed: ', random_data['seed'])
print('Waiting 1 minute to fetch new randomized data...')
except (ValueError, RuntimeError) as e:
