def __init__(self, rref, server, verifycap, commonshare, node,
download_status, shnum, dyhb_rtt, logparent):
self._rref = rref
self._server = server
self._node = node # holds share_hash_tree and UEB
self.actual_segment_size = node.segment_size # might still be None
# XXX change node.guessed_segment_size to
# node.best_guess_segment_size(), which should give us the real ones
# if known, else its guess.
self._guess_offsets(verifycap, node.guessed_segment_size)
self.actual_offsets = None
self._UEB_length = None
self._commonshare = commonshare # holds block_hash_tree
self._download_status = download_status
self._storage_index = verifycap.storage_index
self._si_prefix = base32.b2a(verifycap.storage_index)[:8]
self._shnum = shnum
self._dyhb_rtt = dyhb_rtt
# self._alive becomes False upon fatal corruption or server error
self._alive = True
self._loop_scheduled = False
self._lp = log.msg(format="%(share)s created", share=repr(self),
level=log.NOISY, parent=logparent, umid="P7hv2w")
self._pending = Spans() # request sent but no response received yet
self._received = DataSpans() # ACK response received, with data
self._unavailable = Spans() # NAK response received, no data
# any given byte of the share can be in one of four states:
# in: _wanted, _requested, _received
# FALSE FALSE FALSE : don't care about it at all
# TRUE FALSE FALSE : want it, haven't yet asked for it
# TRUE TRUE FALSE : request is in-flight
# or didn't get it
# FALSE TRUE TRUE : got it, haven't used it yet
# FALSE TRUE FALSE : got it and used it
# FALSE FALSE FALSE : block consumed, ready to ask again
#
# when we request data and get a NAK, we leave it in _requested
# to remind ourself to not ask for it again. We don't explicitly
# remove it from anything (maybe this should change).
#
# We retain the hashtrees in the Node, so we leave those spans in
# _requested (and never ask for them again, as long as the Node is
# alive). But we don't retain data blocks (too big), so when we
# consume a data block, we remove it from _requested, so a later
# download can re-fetch it.
self._requested_blocks = [] # (segnum, set(observer2..))
v = server.get_version()
ver = v[b"http://allmydata.org/tahoe/protocols/storage/v1"]
self._overrun_ok = ver[b"tolerates-immutable-read-overrun"]
# If _overrun_ok and we guess the offsets correctly, we can get
# everything in one RTT. If _overrun_ok and we guess wrong, we might
# need two RTT (but we could get lucky and do it in one). If overrun
# is *not* ok (tahoe-1.3.0 or earlier), we need four RTT: 1=version,
# 2=offset table, 3=UEB_length and everything else (hashes, block),
# 4=UEB.
self.had_corruption = False # for unit tests
def _satisfy_data_block(self, segnum, observers):
tail = (segnum == self._node.num_segments - 1)
datastart = self.actual_offsets["data"]
blockstart = datastart + segnum * self._node.block_size
blocklen = self._node.block_size
if tail:
blocklen = self._node.tail_block_size
block = self._received.pop(blockstart, blocklen)
if not block:
log.msg("no data for block %s (want [%d:+%d])" %
(repr(self), blockstart, blocklen),
level=log.NOISY,
parent=self._lp,
umid="aK0RFw")
return False
log.msg(format="%(share)s._satisfy_data_block [%(start)d:+%(length)d]",
share=repr(self),
start=blockstart,
length=blocklen,
level=log.NOISY,
parent=self._lp,
umid="uTDNZg")
# this block is being retired, either as COMPLETE or CORRUPT, since
# no further data reads will help
assert self._requested_blocks[0][0] == segnum
try:
self._commonshare.check_block(segnum, block)
# hurrah, we have a valid block. Deliver it.
for o in observers:
# goes to SegmentFetcher._block_request_activity
o.notify(state=COMPLETE, block=block)
# now clear our received data, to dodge the #1170 spans.py
# complexity bug
self._received = DataSpans()
except (BadHashError, NotEnoughHashesError) as e:
# rats, we have a corrupt block. Notify our clients that they
# need to look elsewhere, and advise the server. Unlike
# corruption in other parts of the share, this doesn't cause us
# to abandon the whole share.
f = Failure(e)
log.msg(format="hash failure in block %(segnum)d, from %(share)s",
segnum=segnum,
share=repr(self),
failure=f,
level=log.WEIRD,
parent=self._lp,
umid="mZjkqA")
for o in observers:
o.notify(state=CORRUPT)
self._signal_corruption(f, blockstart, blocklen)
self.had_corruption = True
# in either case, we've retired this block
self._requested_blocks.pop(0)
# popping the request keeps us from turning around and wanting the
# block again right away
return True # got satisfaction
def add(self, verinfo, shnum, offset, data):
seqnum = verinfo[0]
if seqnum > self.seqnum:
self._clear()
self.seqnum = seqnum
index = (verinfo, shnum)
if index in self.cache:
self.cache[index].add(offset, data)
else:
spans = DataSpans()
spans.add(offset, data)
self.cache[index] = spans
def add(self, verinfo, shnum, offset, data):
seqnum = verinfo[0]
if seqnum > self.seqnum:
self._clear()
self.seqnum = seqnum
index = (verinfo, shnum)
if index in self.cache:
self.cache[index].add(offset, data)
else:
spans = DataSpans()
spans.add(offset, data)
self.cache[index] = spans
class Share(object):
"""I represent a single instance of a single share (e.g. I reference the
shnum2 for share SI=abcde on server xy12t, not the one on server ab45q).
I am associated with a CommonShare that remembers data that is held in
common among e.g. SI=abcde/shnum2 across all servers. I am also
associated with a CiphertextFileNode for e.g. SI=abcde (all shares, all
servers).
"""
# this is a specific implementation of IShare for tahoe's native storage
# servers. A different backend would use a different class.
def __init__(self, rref, server, verifycap, commonshare, node,
download_status, shnum, dyhb_rtt, logparent):
self._rref = rref
self._server = server
self._node = node # holds share_hash_tree and UEB
self.actual_segment_size = node.segment_size # might still be None
# XXX change node.guessed_segment_size to
# node.best_guess_segment_size(), which should give us the real ones
# if known, else its guess.
self._guess_offsets(verifycap, node.guessed_segment_size)
self.actual_offsets = None
self._UEB_length = None
self._commonshare = commonshare # holds block_hash_tree
self._download_status = download_status
self._storage_index = verifycap.storage_index
self._si_prefix = base32.b2a(verifycap.storage_index)[:8]
self._shnum = shnum
self._dyhb_rtt = dyhb_rtt
# self._alive becomes False upon fatal corruption or server error
self._alive = True
self._loop_scheduled = False
self._lp = log.msg(format="%(share)s created",
share=repr(self),
level=log.NOISY,
parent=logparent,
umid="P7hv2w")
self._pending = Spans() # request sent but no response received yet
self._received = DataSpans() # ACK response received, with data
self._unavailable = Spans() # NAK response received, no data
# any given byte of the share can be in one of four states:
# in: _wanted, _requested, _received
# FALSE FALSE FALSE : don't care about it at all
# TRUE FALSE FALSE : want it, haven't yet asked for it
# TRUE TRUE FALSE : request is in-flight
# or didn't get it
# FALSE TRUE TRUE : got it, haven't used it yet
# FALSE TRUE FALSE : got it and used it
# FALSE FALSE FALSE : block consumed, ready to ask again
#
# when we request data and get a NAK, we leave it in _requested
# to remind ourself to not ask for it again. We don't explicitly
# remove it from anything (maybe this should change).
#
# We retain the hashtrees in the Node, so we leave those spans in
# _requested (and never ask for them again, as long as the Node is
# alive). But we don't retain data blocks (too big), so when we
# consume a data block, we remove it from _requested, so a later
# download can re-fetch it.
self._requested_blocks = [] # (segnum, set(observer2..))
v = server.get_version()
ver = v[b"http://allmydata.org/tahoe/protocols/storage/v1"]
self._overrun_ok = ver[b"tolerates-immutable-read-overrun"]
# If _overrun_ok and we guess the offsets correctly, we can get
# everything in one RTT. If _overrun_ok and we guess wrong, we might
# need two RTT (but we could get lucky and do it in one). If overrun
# is *not* ok (tahoe-1.3.0 or earlier), we need four RTT: 1=version,
# 2=offset table, 3=UEB_length and everything else (hashes, block),
# 4=UEB.
self.had_corruption = False # for unit tests
def __repr__(self):
return "Share(sh%d-on-%s)" % (self._shnum,
str(self._server.get_name(), "utf-8"))
def is_alive(self):
# XXX: reconsider. If the share sees a single error, should it remain
# dead for all time? Or should the next segment try again? This DEAD
# state is stored elsewhere too (SegmentFetcher per-share states?)
# and needs to be consistent. We clear _alive in self._fail(), which
# is called upon a network error, or layout failure, or hash failure
# in the UEB or a hash tree. We do not _fail() for a hash failure in
# a block, but of course we still tell our callers about
# state=CORRUPT so they'll find a different share.
return self._alive
def _guess_offsets(self, verifycap, guessed_segment_size):
self.guessed_segment_size = guessed_segment_size
size = verifycap.size
k = verifycap.needed_shares
N = verifycap.total_shares
r = self._node._calculate_sizes(guessed_segment_size)
# num_segments, block_size/tail_block_size
# guessed_segment_size/tail_segment_size/tail_segment_padded
share_size = mathutil.div_ceil(size, k)
# share_size is the amount of block data that will be put into each
# share, summed over all segments. It does not include hashes, the
# UEB, or other overhead.
# use the upload-side code to get this as accurate as possible
ht = IncompleteHashTree(N)
num_share_hashes = len(ht.needed_hashes(0, include_leaf=True))
wbp = make_write_bucket_proxy(None, None, share_size, r["block_size"],
r["num_segments"], num_share_hashes, 0)
self._fieldsize = wbp.fieldsize
self._fieldstruct = wbp.fieldstruct
self.guessed_offsets = wbp._offsets
# called by our client, the SegmentFetcher
def get_block(self, segnum):
"""Add a block number to the list of requests. This will eventually
result in a fetch of the data necessary to validate the block, then
the block itself. The fetch order is generally
first-come-first-served, but requests may be answered out-of-order if
data becomes available sooner.
I return an EventStreamObserver, which has two uses. The first is to
call o.subscribe(), which gives me a place to send state changes and
eventually the data block. The second is o.cancel(), which removes
the request (if it is still active).
I will distribute the following events through my EventStreamObserver:
- state=OVERDUE: ?? I believe I should have had an answer by now.
You may want to ask another share instead.
- state=BADSEGNUM: the segnum you asked for is too large. I must
fetch a valid UEB before I can determine this,
so the notification is asynchronous
- state=COMPLETE, block=data: here is a valid block
- state=CORRUPT: this share contains corrupted data
- state=DEAD, f=Failure: the server reported an error, this share
is unusable
"""
log.msg("%s.get_block(%d)" % (repr(self), segnum),
level=log.NOISY,
parent=self._lp,
umid="RTo9MQ")
assert segnum >= 0
o = EventStreamObserver()
o.set_canceler(self, "_cancel_block_request")
for i, (segnum0, observers) in enumerate(self._requested_blocks):
if segnum0 == segnum:
observers.add(o)
break
else:
self._requested_blocks.append((segnum, set([o])))
self.schedule_loop()
return o
def _cancel_block_request(self, o):
new_requests = []
for e in self._requested_blocks:
(segnum0, observers) = e
observers.discard(o)
if observers:
new_requests.append(e)
self._requested_blocks = new_requests
# internal methods
def _active_segnum_and_observers(self):
if self._requested_blocks:
# we only retrieve information for one segment at a time, to
# minimize alacrity (first come, first served)
return self._requested_blocks[0]
return None, []
def schedule_loop(self):
if self._loop_scheduled:
return
self._loop_scheduled = True
eventually(self.loop)
def loop(self):
self._loop_scheduled = False
if not self._alive:
return
try:
# if any exceptions occur here, kill the download
log.msg(
"%s.loop, reqs=[%s], pending=%s, received=%s,"
" unavailable=%s" %
(repr(self), ",".join(
[str(req[0])
for req in self._requested_blocks]), self._pending.dump(),
self._received.dump(), self._unavailable.dump()),
level=log.NOISY,
parent=self._lp,
umid="BaL1zw")
self._do_loop()
# all exception cases call self._fail(), which clears self._alive
except (BadHashError, NotEnoughHashesError, LayoutInvalid) as e:
# Abandon this share. We do this if we see corruption in the
# offset table, the UEB, or a hash tree. We don't abandon the
# whole share if we see corruption in a data block (we abandon
# just the one block, and still try to get data from other blocks
# on the same server). In theory, we could get good data from a
# share with a corrupt UEB (by first getting the UEB from some
# other share), or corrupt hash trees, but the logic to decide
# when this is safe is non-trivial. So for now, give up at the
# first sign of corruption.
#
# _satisfy_*() code which detects corruption should first call
# self._signal_corruption(), and then raise the exception.
log.msg(format="corruption detected in %(share)s",
share=repr(self),
level=log.UNUSUAL,
parent=self._lp,
umid="gWspVw")
self._fail(Failure(e), log.UNUSUAL)
except DataUnavailable as e:
# Abandon this share.
log.msg(format="need data that will never be available"
" from %s: pending=%s, received=%s, unavailable=%s" %
(repr(self), self._pending.dump(), self._received.dump(),
self._unavailable.dump()),
level=log.UNUSUAL,
parent=self._lp,
umid="F7yJnQ")
self._fail(Failure(e), log.UNUSUAL)
except BaseException:
self._fail(Failure())
raise
log.msg("%s.loop done, reqs=[%s], pending=%s, received=%s,"
" unavailable=%s" %
(repr(self), ",".join(
[str(req[0])
for req in self._requested_blocks]), self._pending.dump(),
self._received.dump(), self._unavailable.dump()),
level=log.NOISY,
parent=self._lp,
umid="9lRaRA")
def _do_loop(self):
# we are (eventually) called after all state transitions:
# new segments added to self._requested_blocks
# new data received from servers (responses to our read() calls)
# impatience timer fires (server appears slow)
# First, consume all of the information that we currently have, for
# all the segments people currently want.
start = now()
while self._get_satisfaction():
pass
self._download_status.add_misc_event("satisfy", start, now())
# When we get no satisfaction (from the data we've received so far),
# we determine what data we desire (to satisfy more requests). The
# number of segments is finite, so I can't get no satisfaction
# forever.
start = now()
wanted, needed = self._desire()
self._download_status.add_misc_event("desire", start, now())
# Finally, send out requests for whatever we need (desire minus
# have). You can't always get what you want, but if you try
# sometimes, you just might find, you get what you need.
self._send_requests(wanted + needed)
# and sometimes you can't even get what you need
start = now()
disappointment = needed & self._unavailable
if disappointment.len():
self.had_corruption = True
raise DataUnavailable("need %s but will never get it" %
disappointment.dump())
self._download_status.add_misc_event("checkdis", start, now())
def _get_satisfaction(self):
# return True if we retired a data block, and should therefore be
# called again. Return False if we don't retire a data block (even if
# we do retire some other data, like hash chains).
if self.actual_offsets is None:
if not self._satisfy_offsets():
# can't even look at anything without the offset table
return False
if not self._node.have_UEB:
if not self._satisfy_UEB():
# can't check any hashes without the UEB
return False
# the call to _satisfy_UEB() will immediately set the
# authoritative num_segments in all our CommonShares. If we
# guessed wrong, we might stil be working on a bogus segnum
# (beyond the real range). We catch this and signal BADSEGNUM
# before invoking any further code that touches hashtrees.
self.actual_segment_size = self._node.segment_size # might be updated
assert self.actual_segment_size is not None
# knowing the UEB means knowing num_segments
assert self._node.num_segments is not None
segnum, observers = self._active_segnum_and_observers()
# if segnum is None, we don't really need to do anything (we have no
# outstanding readers right now), but we'll fill in the bits that
# aren't tied to any particular segment.
if segnum is not None and segnum >= self._node.num_segments:
for o in observers:
o.notify(state=BADSEGNUM)
self._requested_blocks.pop(0)
return True
if self._node.share_hash_tree.needed_hashes(self._shnum):
if not self._satisfy_share_hash_tree():
# can't check block_hash_tree without a root
return False
if self._commonshare.need_block_hash_root():
block_hash_root = self._node.share_hash_tree.get_leaf(self._shnum)
self._commonshare.set_block_hash_root(block_hash_root)
if segnum is None:
return False # we don't want any particular segment right now
# block_hash_tree
needed_hashes = self._commonshare.get_needed_block_hashes(segnum)
if needed_hashes:
if not self._satisfy_block_hash_tree(needed_hashes):
# can't check block without block_hash_tree
return False
# ciphertext_hash_tree
needed_hashes = self._node.get_needed_ciphertext_hashes(segnum)
if needed_hashes:
if not self._satisfy_ciphertext_hash_tree(needed_hashes):
# can't check decoded blocks without ciphertext_hash_tree
return False
# data blocks
return self._satisfy_data_block(segnum, observers)
def _satisfy_offsets(self):
version_s = self._received.get(0, 4)
if version_s is None:
return False
(version, ) = struct.unpack(">L", version_s)
if version == 1:
table_start = 0x0c
self._fieldsize = 0x4
self._fieldstruct = "L"
elif version == 2:
table_start = 0x14
self._fieldsize = 0x8
self._fieldstruct = "Q"
else:
self.had_corruption = True
raise LayoutInvalid("unknown version %d (I understand 1 and 2)" %
version)
offset_table_size = 6 * self._fieldsize
table_s = self._received.pop(table_start, offset_table_size)
if table_s is None:
return False
fields = struct.unpack(">" + 6 * self._fieldstruct, table_s)
offsets = {}
for i, field in enumerate([
'data',
'plaintext_hash_tree', # UNUSED
'crypttext_hash_tree',
'block_hashes',
'share_hashes',
'uri_extension',
]):
offsets[field] = fields[i]
self.actual_offsets = offsets
log.msg(
"actual offsets: data=%d, plaintext_hash_tree=%d, crypttext_hash_tree=%d, block_hashes=%d, share_hashes=%d, uri_extension=%d"
% tuple(fields),
level=log.NOISY,
parent=self._lp,
umid="jedQcw")
self._received.remove(0, 4) # don't need this anymore
# validate the offsets a bit
share_hashes_size = offsets["uri_extension"] - offsets["share_hashes"]
if share_hashes_size < 0 or share_hashes_size % (2 + HASH_SIZE) != 0:
# the share hash chain is stored as (hashnum,hash) pairs
self.had_corruption = True
raise LayoutInvalid("share hashes malformed -- should be a"
" multiple of %d bytes -- not %d" %
(2 + HASH_SIZE, share_hashes_size))
block_hashes_size = offsets["share_hashes"] - offsets["block_hashes"]
if block_hashes_size < 0 or block_hashes_size % (HASH_SIZE) != 0:
# the block hash tree is stored as a list of hashes
self.had_corruption = True
raise LayoutInvalid("block hashes malformed -- should be a"
" multiple of %d bytes -- not %d" %
(HASH_SIZE, block_hashes_size))
# we only look at 'crypttext_hash_tree' if the UEB says we're
# actually using it. Same with 'plaintext_hash_tree'. This gives us
# some wiggle room: a place to stash data for later extensions.
return True
def _satisfy_UEB(self):
o = self.actual_offsets
fsize = self._fieldsize
UEB_length_s = self._received.get(o["uri_extension"], fsize)
if not UEB_length_s:
return False
(UEB_length, ) = struct.unpack(">" + self._fieldstruct, UEB_length_s)
UEB_s = self._received.pop(o["uri_extension"] + fsize, UEB_length)
if not UEB_s:
return False
self._received.remove(o["uri_extension"], fsize)
try:
self._node.validate_and_store_UEB(UEB_s)
return True
except (LayoutInvalid, BadHashError) as e:
# TODO: if this UEB was bad, we'll keep trying to validate it
# over and over again. Only log.err on the first one, or better
# yet skip all but the first
f = Failure(e)
self._signal_corruption(f, o["uri_extension"], fsize + UEB_length)
self.had_corruption = True
raise
def _satisfy_share_hash_tree(self):
# the share hash chain is stored as (hashnum,hash) tuples, so you
# can't fetch just the pieces you need, because you don't know
# exactly where they are. So fetch everything, and parse the results
# later.
o = self.actual_offsets
hashlen = o["uri_extension"] - o["share_hashes"]
assert hashlen % (2 + HASH_SIZE) == 0
hashdata = self._received.get(o["share_hashes"], hashlen)
if not hashdata:
return False
share_hashes = {}
for i in range(0, hashlen, 2 + HASH_SIZE):
(hashnum, ) = struct.unpack(">H", hashdata[i:i + 2])
hashvalue = hashdata[i + 2:i + 2 + HASH_SIZE]
share_hashes[hashnum] = hashvalue
# TODO: if they give us an empty set of hashes,
# process_share_hashes() won't fail. We must ensure that this
# situation doesn't allow unverified shares through. Manual testing
# shows that set_block_hash_root() throws an assert because an
# internal node is None instead of an actual hash, but we want
# something better. It's probably best to add a method to
# IncompleteHashTree which takes a leaf number and raises an
# exception unless that leaf is present and fully validated.
try:
self._node.process_share_hashes(share_hashes)
# adds to self._node.share_hash_tree
except (BadHashError, NotEnoughHashesError) as e:
f = Failure(e)
self._signal_corruption(f, o["share_hashes"], hashlen)
self.had_corruption = True
raise
self._received.remove(o["share_hashes"], hashlen)
return True
def _signal_corruption(self, f, start, offset):
# there was corruption somewhere in the given range
reason = "corruption in share[%d-%d): %s" % (start, start + offset,
str(f.value))
return self._rref.callRemote(
"advise_corrupt_share", reason.encode("utf-8")).addErrback(
log.err, "Error from remote call to advise_corrupt_share")
def _satisfy_block_hash_tree(self, needed_hashes):
o_bh = self.actual_offsets["block_hashes"]
block_hashes = {}
for hashnum in needed_hashes:
hashdata = self._received.get(o_bh + hashnum * HASH_SIZE,
HASH_SIZE)
if hashdata:
block_hashes[hashnum] = hashdata
else:
return False # missing some hashes
# note that we don't submit any hashes to the block_hash_tree until
# we've gotten them all, because the hash tree will throw an
# exception if we only give it a partial set (which it therefore
# cannot validate)
try:
self._commonshare.process_block_hashes(block_hashes)
except (BadHashError, NotEnoughHashesError) as e:
f = Failure(e)
hashnums = ",".join([str(n) for n in sorted(block_hashes.keys())])
log.msg(format="hash failure in block_hashes=(%(hashnums)s),"
" from %(share)s",
hashnums=hashnums,
shnum=self._shnum,
share=repr(self),
failure=f,
level=log.WEIRD,
parent=self._lp,
umid="yNyFdA")
hsize = max(0, max(needed_hashes)) * HASH_SIZE
self._signal_corruption(f, o_bh, hsize)
self.had_corruption = True
raise
for hashnum in needed_hashes:
self._received.remove(o_bh + hashnum * HASH_SIZE, HASH_SIZE)
return True
def _satisfy_ciphertext_hash_tree(self, needed_hashes):
start = self.actual_offsets["crypttext_hash_tree"]
hashes = {}
for hashnum in needed_hashes:
hashdata = self._received.get(start + hashnum * HASH_SIZE,
HASH_SIZE)
if hashdata:
hashes[hashnum] = hashdata
else:
return False # missing some hashes
# we don't submit any hashes to the ciphertext_hash_tree until we've
# gotten them all
try:
self._node.process_ciphertext_hashes(hashes)
except (BadHashError, NotEnoughHashesError) as e:
f = Failure(e)
hashnums = ",".join([str(n) for n in sorted(hashes.keys())])
log.msg(format="hash failure in ciphertext_hashes=(%(hashnums)s),"
" from %(share)s",
hashnums=hashnums,
share=repr(self),
failure=f,
level=log.WEIRD,
parent=self._lp,
umid="iZI0TA")
hsize = max(0, max(needed_hashes)) * HASH_SIZE
self._signal_corruption(f, start, hsize)
self.had_corruption = True
raise
for hashnum in needed_hashes:
self._received.remove(start + hashnum * HASH_SIZE, HASH_SIZE)
return True
def _satisfy_data_block(self, segnum, observers):
tail = (segnum == self._node.num_segments - 1)
datastart = self.actual_offsets["data"]
blockstart = datastart + segnum * self._node.block_size
blocklen = self._node.block_size
if tail:
blocklen = self._node.tail_block_size
block = self._received.pop(blockstart, blocklen)
if not block:
log.msg("no data for block %s (want [%d:+%d])" %
(repr(self), blockstart, blocklen),
level=log.NOISY,
parent=self._lp,
umid="aK0RFw")
return False
log.msg(format="%(share)s._satisfy_data_block [%(start)d:+%(length)d]",
share=repr(self),
start=blockstart,
length=blocklen,
level=log.NOISY,
parent=self._lp,
umid="uTDNZg")
# this block is being retired, either as COMPLETE or CORRUPT, since
# no further data reads will help
assert self._requested_blocks[0][0] == segnum
try:
self._commonshare.check_block(segnum, block)
# hurrah, we have a valid block. Deliver it.
for o in observers:
# goes to SegmentFetcher._block_request_activity
o.notify(state=COMPLETE, block=block)
# now clear our received data, to dodge the #1170 spans.py
# complexity bug
self._received = DataSpans()
except (BadHashError, NotEnoughHashesError) as e:
# rats, we have a corrupt block. Notify our clients that they
# need to look elsewhere, and advise the server. Unlike
# corruption in other parts of the share, this doesn't cause us
# to abandon the whole share.
f = Failure(e)
log.msg(format="hash failure in block %(segnum)d, from %(share)s",
segnum=segnum,
share=repr(self),
failure=f,
level=log.WEIRD,
parent=self._lp,
umid="mZjkqA")
for o in observers:
o.notify(state=CORRUPT)
self._signal_corruption(f, blockstart, blocklen)
self.had_corruption = True
# in either case, we've retired this block
self._requested_blocks.pop(0)
# popping the request keeps us from turning around and wanting the
# block again right away
return True # got satisfaction
def _desire(self):
segnum, observers = self._active_segnum_and_observers() # maybe None
# 'want_it' is for data we merely want: we know that we don't really
# need it. This includes speculative reads, like the first 1KB of the
# share (for the offset table) and the first 2KB of the UEB.
#
# 'need_it' is for data that, if we have the real offset table, we'll
# need. If we are only guessing at the offset table, it's merely
# wanted. (The share is abandoned if we can't get data that we really
# need).
#
# 'gotta_gotta_have_it' is for data that we absolutely need,
# independent of whether we're still guessing about the offset table:
# the version number and the offset table itself.
#
# Mr. Popeil, I'm in trouble, need your assistance on the double. Aww..
desire = Spans(), Spans(), Spans()
(want_it, need_it, gotta_gotta_have_it) = desire
self.actual_segment_size = self._node.segment_size # might be updated
o = self.actual_offsets or self.guessed_offsets
segsize = self.actual_segment_size or self.guessed_segment_size
r = self._node._calculate_sizes(segsize)
if not self.actual_offsets:
# all _desire functions add bits to the three desire[] spans
self._desire_offsets(desire)
# we can use guessed offsets as long as this server tolerates
# overrun. Otherwise, we must wait for the offsets to arrive before
# we try to read anything else.
if self.actual_offsets or self._overrun_ok:
if not self._node.have_UEB:
self._desire_UEB(desire, o)
self._desire_share_hashes(desire, o)
if segnum is not None:
# They might be asking for a segment number that is beyond
# what we guess the file contains, but _desire_block_hashes
# and _desire_data will tolerate that.
self._desire_block_hashes(desire, o, segnum)
self._desire_data(desire, o, r, segnum, segsize)
log.msg("end _desire: want_it=%s need_it=%s gotta=%s" %
(want_it.dump(), need_it.dump(), gotta_gotta_have_it.dump()),
level=log.NOISY,
parent=self._lp,
umid="IG7CgA")
if self.actual_offsets:
return (want_it, need_it + gotta_gotta_have_it)
else:
return (want_it + need_it, gotta_gotta_have_it)
def _desire_offsets(self, desire):
(want_it, need_it, gotta_gotta_have_it) = desire
if self._overrun_ok:
# easy! this includes version number, sizes, and offsets
want_it.add(0, 1024)
return
# v1 has an offset table that lives [0x0,0x24). v2 lives [0x0,0x44).
# To be conservative, only request the data that we know lives there,
# even if that means more roundtrips.
gotta_gotta_have_it.add(0, 4) # version number, always safe
version_s = self._received.get(0, 4)
if not version_s:
return
(version, ) = struct.unpack(">L", version_s)
# The code in _satisfy_offsets will have checked this version
# already. There is no code path to get this far with version>2.
assert 1 <= version <= 2, "can't get here, version=%d" % version
if version == 1:
table_start = 0x0c
fieldsize = 0x4
elif version == 2:
table_start = 0x14
fieldsize = 0x8
offset_table_size = 6 * fieldsize
gotta_gotta_have_it.add(table_start, offset_table_size)
def _desire_UEB(self, desire, o):
(want_it, need_it, gotta_gotta_have_it) = desire
# UEB data is stored as (length,data).
if self._overrun_ok:
# We can pre-fetch 2kb, which should probably cover it. If it
# turns out to be larger, we'll come back here later with a known
# length and fetch the rest.
want_it.add(o["uri_extension"], 2048)
# now, while that is probably enough to fetch the whole UEB, it
# might not be, so we need to do the next few steps as well. In
# most cases, the following steps will not actually add anything
# to need_it
need_it.add(o["uri_extension"], self._fieldsize)
# only use a length if we're sure it's correct, otherwise we'll
# probably fetch a huge number
if not self.actual_offsets:
return
UEB_length_s = self._received.get(o["uri_extension"], self._fieldsize)
if UEB_length_s:
(UEB_length, ) = struct.unpack(">" + self._fieldstruct,
UEB_length_s)
# we know the length, so make sure we grab everything
need_it.add(o["uri_extension"] + self._fieldsize, UEB_length)
def _desire_share_hashes(self, desire, o):
(want_it, need_it, gotta_gotta_have_it) = desire
if self._node.share_hash_tree.needed_hashes(self._shnum):
hashlen = o["uri_extension"] - o["share_hashes"]
need_it.add(o["share_hashes"], hashlen)
def _desire_block_hashes(self, desire, o, segnum):
(want_it, need_it, gotta_gotta_have_it) = desire
# block hash chain
for hashnum in self._commonshare.get_desired_block_hashes(segnum):
need_it.add(o["block_hashes"] + hashnum * HASH_SIZE, HASH_SIZE)
# ciphertext hash chain
for hashnum in self._node.get_desired_ciphertext_hashes(segnum):
need_it.add(o["crypttext_hash_tree"] + hashnum * HASH_SIZE,
HASH_SIZE)
def _desire_data(self, desire, o, r, segnum, segsize):
if segnum > r["num_segments"]:
# they're asking for a segment that's beyond what we think is the
# end of the file. We won't get here if we've already learned the
# real UEB: _get_satisfaction() will notice the out-of-bounds and
# terminate the loop. So we must still be guessing, which means
# that they might be correct in asking for such a large segnum.
# But if they're right, then our segsize/segnum guess is
# certainly wrong, which means we don't know what data blocks to
# ask for yet. So don't bother adding anything. When the UEB
# comes back and we learn the correct segsize/segnums, we'll
# either reject the request or have enough information to proceed
# normally. This costs one roundtrip.
log.msg("_desire_data: segnum(%d) looks wrong (numsegs=%d)" %
(segnum, r["num_segments"]),
level=log.UNUSUAL,
parent=self._lp,
umid="tuYRQQ")
return
(want_it, need_it, gotta_gotta_have_it) = desire
tail = (segnum == r["num_segments"] - 1)
datastart = o["data"]
blockstart = datastart + segnum * r["block_size"]
blocklen = r["block_size"]
if tail:
blocklen = r["tail_block_size"]
need_it.add(blockstart, blocklen)
def _send_requests(self, desired):
ask = desired - self._pending - self._received.get_spans()
log.msg("%s._send_requests, desired=%s, pending=%s, ask=%s" %
(repr(self), desired.dump(), self._pending.dump(), ask.dump()),
level=log.NOISY,
parent=self._lp,
umid="E94CVA")
# XXX At one time, this code distinguished between data blocks and
# hashes, and made sure to send (small) requests for hashes before
# sending (big) requests for blocks. The idea was to make sure that
# all hashes arrive before the blocks, so the blocks can be consumed
# and released in a single turn. I removed this for simplicity.
# Reconsider the removal: maybe bring it back.
ds = self._download_status
for (start, length) in ask:
# TODO: quantize to reasonably-large blocks
self._pending.add(start, length)
lp = log.msg(format="%(share)s._send_request"
" [%(start)d:+%(length)d]",
share=repr(self),
start=start,
length=length,
level=log.NOISY,
parent=self._lp,
umid="sgVAyA")
block_ev = ds.add_block_request(self._server, self._shnum, start,
length, now())
d = self._send_request(start, length)
d.addCallback(self._got_data, start, length, block_ev, lp)
d.addErrback(self._got_error, start, length, block_ev, lp)
d.addCallback(self._trigger_loop)
d.addErrback(
lambda f: log.err(format="unhandled error during send_request",
failure=f,
parent=self._lp,
level=log.WEIRD,
umid="qZu0wg"))
def _send_request(self, start, length):
return self._rref.callRemote("read", start, length)
def _got_data(self, data, start, length, block_ev, lp):
block_ev.finished(len(data), now())
if not self._alive:
return
log.msg(
format="%(share)s._got_data [%(start)d:+%(length)d] -> %(datalen)d",
share=repr(self),
start=start,
length=length,
datalen=len(data),
level=log.NOISY,
parent=lp,
umid="5Qn6VQ")
self._pending.remove(start, length)
self._received.add(start, data)
# if we ask for [a:c], and we get back [a:b] (b<c), that means we're
# never going to get [b:c]. If we really need that data, this block
# will never complete. The easiest way to get into this situation is
# to hit a share with a corrupted offset table, or one that's somehow
# been truncated. On the other hand, when overrun_ok is true, we ask
# for data beyond the end of the share all the time (it saves some
# RTT when we don't know the length of the share ahead of time). So
# not every asked-for-but-not-received byte is fatal.
if len(data) < length:
self._unavailable.add(start + len(data), length - len(data))
# XXX if table corruption causes our sections to overlap, then one
# consumer (i.e. block hash tree) will pop/remove the data that
# another consumer (i.e. block data) mistakenly thinks it needs. It
# won't ask for that data again, because the span is in
# self._requested. But that span won't be in self._unavailable
# because we got it back from the server. TODO: handle this properly
# (raise DataUnavailable). Then add sanity-checking
# no-overlaps-allowed tests to the offset-table unpacking code to
# catch this earlier. XXX
# accumulate a wanted/needed span (not as self._x, but passed into
# desire* functions). manage a pending/in-flight list. when the
# requests are sent out, empty/discard the wanted/needed span and
# populate/augment the pending list. when the responses come back,
# augment either received+data or unavailable.
# if a corrupt offset table results in double-usage, we'll send
# double requests.
# the wanted/needed span is only "wanted" for the first pass. Once
# the offset table arrives, it's all "needed".
def _got_error(self, f, start, length, block_ev, lp):
block_ev.error(now())
log.msg(format="error requesting %(start)d+%(length)d"
" from %(server)s for si %(si)s",
start=start,
length=length,
server=self._server.get_name(),
si=self._si_prefix,
failure=f,
parent=lp,
level=log.UNUSUAL,
umid="BZgAJw")
# retire our observers, assuming we won't be able to make any
# further progress
self._fail(f, log.UNUSUAL)
def _trigger_loop(self, res):
if self._alive:
self.schedule_loop()
return res
def _fail(self, f, level=log.WEIRD):
log.msg(format="abandoning %(share)s",
share=repr(self),
failure=f,
level=level,
parent=self._lp,
umid="JKM2Og")
self._alive = False
for (segnum, observers) in self._requested_blocks:
for o in observers:
o.notify(state=DEAD, f=f)
def init(self, N):
self.s = DataSpans()
class B(object):
def __init__(self, inf):
self.inf = inf
def init(self, N):
self.s = DataSpans()
# self.stats = {}
def run(self, N):
count = 0
inline = self.inf.readline()
while count < N and inline != '':
if DUMP_S in inline:
self.s.dump()
# self.stats['dump'] = self.stats.get('dump', 0) + 1
elif GET_SPANS_S in inline:
self.s.get_spans()
# self.stats['get_spans'] = self.stats.get('get_spans', 0) + 1
elif ADD_R.search(inline):
mo = ADD_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.add(start, 'x' * length)
# self.stats['add'] = self.stats.get('add', 0) + 1
elif GET_R.search(inline):
mo = GET_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.get(start, length)
# self.stats['get'] = self.stats.get('get', 0) + 1
elif REMOVE_R.search(inline):
mo = REMOVE_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.remove(start, length)
# self.stats['remove'] = self.stats.get('remove', 0) + 1
elif POP_R.search(inline):
mo = POP_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.pop(start, length)
# self.stats['pop'] = self.stats.get('pop', 0) + 1
elif INIT_S in inline:
pass
else:
print("Warning, didn't recognize this line: %r" % (inline, ))
count += 1
inline = self.inf.readline()
def init(self, N):
self.s = DataSpans()
class B(object):
def __init__(self, inf):
self.inf = inf
def init(self, N):
self.s = DataSpans()
# self.stats = {}
def run(self, N):
count = 0
inline = self.inf.readline()
while count < N and inline != '':
if DUMP_S in inline:
self.s.dump()
# self.stats['dump'] = self.stats.get('dump', 0) + 1
elif GET_SPANS_S in inline:
self.s.get_spans()
# self.stats['get_spans'] = self.stats.get('get_spans', 0) + 1
elif ADD_R.search(inline):
mo = ADD_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.add(start, 'x'*length)
# self.stats['add'] = self.stats.get('add', 0) + 1
elif GET_R.search(inline):
mo = GET_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.get(start, length)
# self.stats['get'] = self.stats.get('get', 0) + 1
elif REMOVE_R.search(inline):
mo = REMOVE_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.remove(start, length)
# self.stats['remove'] = self.stats.get('remove', 0) + 1
elif POP_R.search(inline):
mo = POP_R.search(inline)
start = int(mo.group(1))
length = int(mo.group(2))
self.s.pop(start, length)
# self.stats['pop'] = self.stats.get('pop', 0) + 1
elif INIT_S in inline:
pass
else:
print "Warning, didn't recognize this line: %r" % (inline,)
count += 1
inline = self.inf.readline()
